Search Results

Search found 10640 results on 426 pages for 'apache2 module'.

Page 8/426 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load

    I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

    Read the article

  • DotNetNuke Module Packaging

    - by user326502
    Does anyone know of any simple, concise tutorials for packaging DotNetNuke modules for DotNetNuke 4 and DotNetNuke 5? Preferably something concerning DotNetNuke 5.4, since that's what I'm running. The examples that I've seen all assume background knowledge, or they are about short-cuts to the existing process. I'm a beginner, so I need the simple basics. Thanks very much for any help.

    Read the article

  • Apache2 benchmarks - very poor performance

    - by andrzejp
    I have two servers on which I test the configuration of apache2. The first server: 4GB of RAM, AMD Athlon (tm) 64 X2 Dual Core Processor 5600 + Apache 2.2.3, mod_php, mpm prefork: Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 150 KeepAliveTimeout 4 <IfModule Mpm_prefork_module> StartServers 7 MinSpareServers 15 MaxSpareServers 30 MaxClients 250 MaxRequestsPerChild 2000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c Second server: 8GB of RAM, Intel (R) Core (TM) i7 CPU [email protected] Apache 2.2.9, **fcgid, mpm worker, suexec** PHP scripts are running via fcgi-wrapper Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4 <IfModule Mpm_worker_module> StartServers 10 MaxClients 200 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 1000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c worker.c http_core.c mod_so.c The following test results, which are very strange! New server (dynamic content - php via fcgid+suexec): Server Software: Apache/2.2.9 Server Hostname: XXXXXXXX Server Port: 80 Document Path: XXXXXXX Document Length: 179512 bytes Concurrency Level: 10 Time taken for tests: 0.26276 seconds Complete requests: 1000 Failed requests: 0 Total transferred: 179935000 bytes HTML transferred: 179512000 bytes Requests per second: 38.06 Transfer rate: 6847.88 kb/s received Connnection Times (ms) min avg max Connect: 2 4 54 Processing: 161 257 449 Total: 163 261 503 Old server (dynamic content - mod_php): Server Software: Apache/2.2.3 Server Hostname: XXXXXX Server Port: 80 Document Path: XXXXXX Document Length: 187537 bytes Concurrency Level: 10 Time taken for tests: 173.073 seconds Complete requests: 1000 Failed requests: 22 (Connect: 0, Length: 22, Exceptions: 0) Total transferred: 188003372 bytes HTML transferred: 187546372 bytes Requests per second: 5777.91 Transfer rate: 1086267.40 kb/s received Connnection Times (ms) min avg max Connect: 3 3 28 Processing: 298 1724 26615 Total: 301 1727 26643 Old server: Static content (jpg file) Server Software: Apache/2.2.3 Server Hostname: xxxxxxxxx Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.558 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 40864400 bytes HTML transferred: 40557482 bytes Requests per second: 281.09 [#/sec] (mean) Time per request: 355.753 [ms] (mean) Time per request: 3.558 [ms] (mean, across all concurrent requests) Transfer rate: 11217.51 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 3 11 4.5 12 23 Processing: 40 329 61.4 339 1009 Waiting: 6 282 55.2 293 737 Total: 43 340 63.0 351 1020 New server - static content (jpg file) Server Software: Apache/2.2.9 Server Hostname: XXXXX Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.571531 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 41282792 bytes HTML transferred: 41030080 bytes Requests per second: 279.99 [#/sec] (mean) Time per request: 357.153 [ms] (mean) Time per request: 3.572 [ms] (mean, across all concurrent requests) Transfer rate: 11287.88 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 2 63 24.8 66 119 Processing: 124 278 31.8 282 391 Waiting: 3 70 28.5 66 164 Total: 126 341 35.9 350 443 I noticed that in the apache error.log is a lot of entries: [notice] mod_fcgid: call /www/XXXXX/public_html/forum/index.php with wrapper /www/php-fcgi-scripts/XXXXXX/php-fcgi-starter What I have omitted, or do not understand? Such a difference in requests per second? Is it possible? What could be the cause?

    Read the article

  • Logging Apache2 payload to evaluate SOAP message

    - by Phil
    I am trying to log webservice specific information with Apache (Apache acts as a load-balancer by use of mod_jk). For instance I want to know how long the responsetime of each webservice-call takes. To do this I definitely would need to know the name of the webservice-method in the log-file. As a matter of fact, the name of the webservice-method is wrapped in the SOAP-body, to which I have no access to with the default-configuration. Does anybody know an Apache module to extend the log-information? Or are there any other ideas to solve this challenge? Thx!

    Read the article

  • apache2 is making my amazon ec2 unavailable, any ideas?

    - by Tim
    I have a web server running on a EC2 c1.medium intance. The instance is running on ubuntu, with apache2 and mysql.The ubuntu and apache version are the next; Ubuntu DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.04 DISTRIB_CODENAME=natty DISTRIB_DESCRIPTION="Ubuntu 11.04" Apache2 Server version: Apache/2.2.17 (Ubuntu) Server built: Feb 22 2011 18:33:02 Sometimes randomly, my server "hangs up", I cannot connect to it using normal web access or ssh access. If I reboot the instance it reboots fine, the amazon system log doesn't show anything weird, but the problem persists The only way to solve it its stopping the instance, and start it again. I think that the problem its has something to do with apache, because the last lines of the error log lists: normal errors [Sun Jun 19 06:25:09 2011] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.2 with Suhosin-Patch configured -- resuming normal operations nobody cant connetc... no more erros until i stop and start the instance normal errors [Wed Jun 22 14:21:18 2011] [notice] Apache/2.2.17 (Ubuntu) PHP/5.3.5-1ubuntu7.2 with Suhosin-Patch configured -- resuming normal operations nobody cant connetc... no more erros until i stop and start the instance Can somebody please help me?

    Read the article

  • Apache2 Segmentation fault with wsgi_module

    - by a coder
    Apache 2.2.3 is running as an existing web server under RHEL 5. Attempting to set up Trac using wsgi_module. RHEL 5 ships with python 2.4, so in order to use the current version of Trac (1.0) I needed to install it with easy_install-2.6. Trac works with the default mod_python, however users strongly encourage not using this module as it is officially dead. Using RHEL's package manager, I downloaded/installed python26-mod_wsgi.so. I backed up the httpd.conf, then made the following additions: LoadModule wsgi_module modules/python26-mod_wsgi.so #...# WSGIScriptAlias /trac /www/virtualhosts/trac/deploy/cgi-bin/trac.wsgi <Directory /www/virtualhosts/trac/deploy/cgi-bin> WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> Next I moved trac.conf to trac.conf.bak (contains mod_python calls). I tested the configuration using: apachectl configtest Syntax is OK. So I reloaded the server config using: service httpd reload At this time, all virtualhosted sites stopped responding. I restored my backup copy of httpd.conf, reloaded the server config, and the virtualhosted sites are being served again. A quick look at the httpd error_log shows: [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28282): Initializing Python. [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28280): Attach interpreter ''. [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1817): proxy: grabbed scoreboard slot 0 in child 28283 for worker proxy:reverse [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1836): proxy: worker proxy:reverse already initialized [Mon Oct 08 10:20:04 2012] [debug] proxy_util.c(1930): proxy: initialized single connection worker 0 in child 28283 for (*) [Mon Oct 08 10:20:04 2012] [info] mod_wsgi (pid=28283): Initializing Python. [Mon Oct 08 10:20:04 2012] [notice] child pid 28249 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28250 exit signal Segmentation fault (11) [Mon Oct 08 10:20:04 2012] [notice] child pid 28251 exit signal Segmentation fault (11) There are many similar lines, this is just a snip of the log file. Suggestions on what could be going on to cause the Segmentation faults?

    Read the article

  • Apache2 Segfault - need help interpreting this coredump (suspect cause is memcache / php session related)

    - by WayneDV
    Three Apache2 web servers running a PHP 5.2.3 web site. We're using Memcache to cache rendered pages but also as the storage engine of the PHP Sessions. At peak traffic times we're getting Apache segmentation faults on all three web servers and all HTTPD child processes segfault. My gut tells me that the increased Memcache traffic is stopping PHP sessions from being created or cleaned up and thus the processes die. Is it possible for someone to confirm that from the following? : #0 _zend_mm_free_int (heap=0x7fb67a075820, p=0x7fb67a011538) at /usr/src/debug/php-5.3.3/Zend/zend_alloc.c:2018 #1 0x00007fb665d02e82 in mmc_buffer_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:50 #2 mmc_request_free (request=0x7fb67a011548) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:169 #3 0x00007fb665d031ea in mmc_pool_free (pool=0x7fb67a00e458) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_pool.c:917 #4 0x00007fb665d0a2f1 in ps_close_memcache (mod_data=0x7fb66d625440) at /usr/src/debug/php-pecl-memcache-3.0.4/memcache-3.0.4/memcache_session.c:185 #5 0x00007fb66d1b0935 in php_session_save_current_state () at /usr/src/debug/php-5.3.3/ext/session/session.c:625 #6 php_session_flush () at /usr/src/debug/php-5.3.3/ext/session/session.c:1517 #7 0x00007fb66d1b0c1b in zm_deactivate_session (type=<value optimized out>, module_number=<value optimized out>) at /usr/src/debug/php-5.3.3/ext/session/session.c:2171 #8 0x00007fb66d2a719c in module_registry_cleanup (module=<value optimized out>) at /usr/src/debug/php-5.3.3/Zend/zend_API.c:2150 #9 0x00007fb66d2b1994 in zend_hash_reverse_apply (ht=0x7fb66d629d60, apply_func=0x7fb66d2a7180 <module_registry_cleanup>) at /usr/src/debug/php-5.3.3/Zend/zend_hash.c:755 #10 0x00007fb66d2a5c0d in zend_deactivate_modules () at /usr/src/debug/php-5.3.3/Zend/zend.c:866 #11 0x00007fb66d2541b5 in php_request_shutdown (dummy=<value optimized out>) at /usr/src/debug/php-5.3.3/main/main.c:1607 #12 0x00007fb66d32e037 in php_apache_request_dtor (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:509 #13 php_handler (r=0x7fb67a229658) at /usr/src/debug/php-5.3.3/sapi/apache2handler/sapi_apache2.c:681 #14 0x00007fb6784166f0 in ap_run_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:158 #15 0x00007fb678419f58 in ap_invoke_handler (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/server/config.c:372 #16 0x00007fb6784254f0 in ap_process_request (r=0x7fb67a229658) at /usr/src/debug/httpd-2.2.15/modules/http/http_request.c:282 #17 0x00007fb678422418 in ap_process_http_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/modules/http/http_core.c:190 #18 0x00007fb67841e1b8 in ap_run_process_connection (c=0x7fb67a2193a8) at /usr/src/debug/httpd-2.2.15/server/connection.c:43 #19 0x00007fb678429f4b in child_main (child_num_arg=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:662 #20 0x00007fb67842a21a in make_child (s=0x7fb679cd7860, slot=153) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:758 #21 0x00007fb67842aea4 in perform_idle_server_maintenance (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:893 #22 ap_mpm_run (_pconf=<value optimized out>, plog=<value optimized out>, s=<value optimized out>) at /usr/src/debug/httpd-2.2.15/server/mpm/prefork/prefork.c:1097 #23 0x00007fb678402890 in main (argc=1, argv=0x7fff6fecacb8) at /usr/src/debug/httpd-2.2.15/server/main.c:740 PHP.INI Follows: [PHP] engine = On short_open_tag = On asp_tags = Off precision = 14 y2k_compliance = On output_buffering = 4096 zlib.output_compression = Off implicit_flush = Off unserialize_callback_func = serialize_precision = 100 allow_call_time_pass_reference = Off safe_mode = Off safe_mode_gid = Off safe_mode_include_dir = safe_mode_exec_dir = safe_mode_allowed_env_vars = PHP_ safe_mode_protected_env_vars = LD_LIBRARY_PATH disable_functions = disable_classes = expose_php = On max_execution_time = 30 max_input_time = 60 memory_limit = 128M error_reporting = E_ALL & ~E_DEPRECATED display_errors = Off display_startup_errors = Off log_errors = Off log_errors_max_len = 1024 ignore_repeated_errors = Off ignore_repeated_source = Off report_memleaks = On track_errors = Off html_errors = Off variables_order = "GPCS" request_order = "GP" register_globals = Off register_long_arrays = Off register_argc_argv = Off auto_globals_jit = On post_max_size = 8M magic_quotes_gpc = Off magic_quotes_runtime = Off magic_quotes_sybase = Off auto_prepend_file = auto_append_file = default_mimetype = "text/html" doc_root = user_dir = enable_dl = Off file_uploads = On upload_max_filesize = 2M allow_url_fopen = On allow_url_include = Off default_socket_timeout = 60 [Date] [filter] [iconv] [intl] [sqlite] [sqlite3] [Pcre] [Pdo] [Phar] [Syslog] define_syslog_variables = Off [mail function] SMTP = localhost smtp_port = 25 sendmail_path = /usr/sbin/sendmail -t -i mail.add_x_header = On [SQL] sql.safe_mode = Off [ODBC] odbc.allow_persistent = On odbc.check_persistent = On odbc.max_persistent = -1 odbc.max_links = -1 odbc.defaultlrl = 4096 odbc.defaultbinmode = 1 [MySQL] mysql.allow_persistent = On mysql.max_persistent = -1 mysql.max_links = -1 mysql.default_port = mysql.default_socket = mysql.default_host = mysql.default_user = mysql.default_password = mysql.connect_timeout = 60 mysql.trace_mode = Off [MySQLi] mysqli.max_links = -1 mysqli.default_port = 3306 mysqli.default_socket = mysqli.default_host = mysqli.default_user = mysqli.default_pw = mysqli.reconnect = Off [PostgresSQL] pgsql.allow_persistent = On pgsql.auto_reset_persistent = Off pgsql.max_persistent = -1 pgsql.max_links = -1 pgsql.ignore_notice = 0 pgsql.log_notice = 0 [Sybase-CT] sybct.allow_persistent = On sybct.max_persistent = -1 sybct.max_links = -1 sybct.min_server_severity = 10 sybct.min_client_severity = 10 [bcmath] bcmath.scale = 0 [browscap] [Session] session.save_handler = files session.save_path = "/var/lib/php/session" session.use_cookies = 1 session.use_only_cookies = 1 session.name = PHPSESSID session.auto_start = 1 session.cookie_lifetime = 0 session.cookie_path = / session.cookie_domain = session.cookie_httponly = session.serialize_handler = php session.gc_probability = 1 session.gc_divisor = 1000 session.gc_maxlifetime = 1440 session.bug_compat_42 = Off session.bug_compat_warn = Off session.referer_check = session.entropy_length = 0 session.entropy_file = session.cache_limiter = nocache session.cache_expire = 180 session.use_trans_sid = 0 session.hash_function = 0 session.hash_bits_per_character = 5 url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] mssql.allow_persistent = On mssql.max_persistent = -1 mssql.max_links = -1 mssql.min_error_severity = 10 mssql.min_message_severity = 10 mssql.compatability_mode = Off mssql.secure_connection = Off [Assertion] [COM] [mbstring] [gd] [exif] [Tidy] tidy.clean_output = Off [soap] soap.wsdl_cache_enabled=1 soap.wsdl_cache_dir="/tmp" soap.wsdl_cache_ttl=86400 /etc/php.d/memcached.ini : session.save_path="tcp://memcache1:11211?persistent=1&weight=1&timeout=3&retry_interval=15"

    Read the article

  • Windows could not start the Apache2 on Local Computer - problem

    - by vaske
    During the installation of Apache2 I got the following message into cmd window: Installing the Apache2.2 service The Apache2.2 service is successfully installed. Testing httpd.conf.... Errors reported here must be corrected before the service can be started. httpd.exe: Could not reliably determine the server's fully qualified domain name , using 192.168.1.3 for ServerName (OS 10048)Only one usage of each socket address (protocol/network address/port) is normally permitted. : make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Note the errors or messages above, and press the key to exit. 24... and after installing everything look fine, but it isn't. If I try to start service I got the following message: Windows could not start the Apache2 on Local Computer. For more information, review the System Event Log. If this is a non-Micorsoft service, contact the service vendor, and refer to service-specific error code 1. Apach2 version is 2.2.9 Does anyone have the same problem, or could help me.

    Read the article

  • Rails, Apache2 on Ubuntu (karmic) deployment

    - by Steve
    I just need some clarification on a couple of files. My site has an admin subdomain and SSL in addition to the normal *:80 details found in the virtual hosts. My question(s): Do I need to specify a 1) ServerName and 2) DocumentRoot in: /etc/apache2/apache2.conf? I currently enable my site from this directory: /etc/apache2/sites-available/site Here are the contents of my site file in the above directory (/etc/apache2/sites-available/site): <VirtualHost *:80> ServerName www.site.com ServerAlias www.site.com DocumentRoot /home/user/public_html/site/current/public RailsAllowModRewrite off <directory "/home/user/public_html/site/current/public"> Order allow,deny Allow from all </directory> </VirtualHost> <VirtualHost *:80> ServerName www.site.com ServerAlias admin.site.com DocumentRoot /home/user/public_html/site/current/public RailsAllowModRewrite off <directory "/home/user/public_html/site/current/public"> Order allow,deny Allow from all </directory> </VirtualHost> <VirtualHost *:443> ServerName www.site.com ServerAlias www.site.com # SSL releated SSLEngine on SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire SSLCertificateFile /path/to/site.com.crt SSLCertificateChainFile /path/to/bundle.crt SSLCertificateKeyFile /path/to/site.key # Used by rails RequestHeader set X_FORWARDED_PROTO "https" </VirtualHost> Do you see anything wrong?

    Read the article

  • permanently load module

    - by Radu
    I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them after almost a month of googling, but not all, my 2 Desktops have no problem with 10.10) so I decided to switch back to 10.04, where I have a problem: My broadband speed is very low beacause of the kernel module r8169, I downloaded the good module r8101 and every time the computer boots have a rc.local entry to fix this. Question: Can I load the modul permanently from a specific location. I heard about /etc/modules but there I need the module name, but I have to load it from a specific path (where is the default path for that) Thank you. So I studied the script: It creates the file r8101.ko in /lib/modules/uname -r/kernel/drivers/net so I think as long as nobody will delete that file, and I don't update the kernel, maybe adding r8108 to /etc/modules will work, and add r8169 to blacklist ... I will give it a try. EDIT2: So I added r8101 to /etc/modules and blacklist r8169 to /etc/modprobe.d/blacklist.conf It still uses the old module, lsmod prints: radu@adu:~$ lsmod | grep r8 r8101 67626 0 r8169 34108 0 mii 4381 1 r8169 EDIT: the module is loaded using this script that came with it: #!/bin/sh # invoke insmod with all arguments we got # and use a pathname, as insmod doesn't look in . by default TARGET_PATH=/lib/modules/`uname -r`/kernel/drivers/net echo echo "Check old driver and unload it." check=`lsmod | grep r8169` if [ "$check" != "" ]; then echo "rmmod r8169" /sbin/rmmod r8169 fi check=`lsmod | grep r8101` if [ "$check" != "" ]; then echo "rmmod r8101" /sbin/rmmod r8101 fi echo "Build the module and install" echo "-------------------------------" >> log.txt date 1>>log.txt make all 1>>log.txt || exit 1 module=`ls src/*.ko` module=${module#src/} module=${module%.ko} if [ "$module" == "" ]; then echo "No driver exists!!!" exit 1 elif [ "$module" != "r8169" ]; then if test -e $TARGET_PATH/r8169.ko ; then echo "Backup r8169.ko" if test -e $TARGET_PATH/r8169.bak ; then i=0 while test -e $TARGET_PATH/r8169.bak$i do i=$(($i+1)) done echo "rename r8169.ko to r8169.bak$i" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak$i else echo "rename r8169.ko to r8169.bak" mv $TARGET_PATH/r8169.ko $TARGET_PATH/r8169.bak fi fi fi echo "Depending module. Please wait." depmod -a echo "load module $module" modprobe $module echo "Completed." exit 0

    Read the article

  • Mixing SSL and non-SSL content in an Apache2 virtual host

    - by gravyface
    I have a (hopefully) common scenario for one of my sites that I just can't seem to figure out how to deploy correctly. I have the following site and directories for example.com: These need to require SSL: /var/www/example.com/admin /var/www/example.com/order These need to be non-SSL: /var/www/example.com/maps These need to support both: /var/www/example.com/css /var/www/example.com/js /var/www/example.com/img I have two virtual host declarations for the one site in my /sites-available/example.com file; the top one is *:443 the second one is *:80. Since I have two sites, and if a request comes in on 443, the top virtualhost is used, same with the bottom if it's a port 80 request. However, I can't seem to enforce my SSL requirements using SSLRequireSSL because I'm assuming a port 80 request to /admin or /order is not even hitting the *:443 vhost. Should I just Deny All to /order and /admin within the *:80 virtual host so that if you try to request it on 80, you'll get a 403 Forbidden?

    Read the article

  • Apache2 mod_proxy to remote Tomcat7 - slow response

    - by 12N
    Been stuck with this one for a few days. Will try to provide as much information as possible, but please feel free to ask for extra detail. I have 2 VMs behind a NAT, 192.168.0.100 and 192.168.0.102, both running Ubuntu 11.04 x64. The first one is mapped to the exterior and is our webserver, has one Apache/2.2.17 install with several vhosts to serve static content, and there's also mod_jk for load balancing. The second one has a tomcat 7 install with several J2EE REST webservices but no apache - requests are expected to be passed directly from .100 apache to .102 tomcat. It is my intention to prepare a tomcat clustered environment. My problem: Requests reach to 192.168.0.100 with no trouble whatsoever, but then take about... 100 seconds for data to actually arrive to .102 - by that time apache has already timeouted, but tomcat receives and processes the request pretty normally. This happens both when using mod_jk, mod_proxy, or mod_ajp_proxy. No idea why, since there are no firewalls in either of the machines, both are pingable - more than that, there are NFS shares active working like a charm - and a mod_proxy experience shown that requests originating directly from .100 are processed normally. Also, to add insult to injury, a similar environment is set up at our office network. Everything works perfectly. -_- The only difference? We have no ip translation at the office and do everything by internal addresses - dunno if that's relevant in any way. Some configs: Apache vhost: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ ServerName www.example.com ProxyRequests Off <Proxy *> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Proxy> ProxyPass /bork http://192.168.0.102:8080/bork ProxyPassReverse /bork http://192.168.0.102:8080/bork LogLevel debug CustomLog ${APACHE_LOG_DIR}/api_access.log combined ErrorLog ${APACHE_LOG_DIR}/api_error.log </VirtualHost> Tomcat connectors <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <Connector port="8009" enableLookups="false" redirectPort="8443" protocol="AJP/1.3" /> And a debug log from apache, from a test using mod_proxy_ajp. The behavior is pretty much the same in mod_proxy, at least regarding the delay. Please note that tomcat eventually receives and processes the request, more or less when the log starts being updated again: [Sun May 06 14:40:33 2012] [debug] proxy_util.c(1506): [client 188.81.234.2] proxy: ajp: found worker ajp://192.168.0.102:8008/bork for ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] mod_proxy.c(1015): Running scheme ajp handler (attempt 0) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(661): proxy: AJP: serving URL ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2011): proxy: AJP: has acquired connection for (192.168.0.102) [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2067): proxy: connecting ajp://192.168.0.102:8008/bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2193): proxy: connected /bork/SSOIdentityProviderSoap to 192.168.0.102:8008 [Sun May 06 14:40:33 2012] [debug] proxy_util.c(2444): proxy: AJP: fam 2 socket created to connect to 192.168.0.102 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(224): Into ajp_marshal_into_msgb [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[0] [Accept-Encoding] = [gzip,deflate] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[1] [Content-Type] = [text/xml;charset=UTF-8] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[2] [SOAPAction] = [""] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[3] [User-Agent] = [Jakarta Commons-HttpClient/3.1] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[4] [Host] = [www.example.com] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(290): ajp_marshal_into_msgb: Header[5] [Content-Length] = [520] [Sun May 06 14:40:33 2012] [debug] ajp_header.c(450): ajp_marshal_into_msgb: Done [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(267): proxy: APR_BUCKET_IS_EOS [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(272): proxy: data to read (max 8186 at 4) [Sun May 06 14:40:33 2012] [debug] mod_proxy_ajp.c(287): proxy: got 520 bytes of data [Sun May 06 14:40:33 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 06 [Sun May 06 14:40:33 2012] [debug] ajp_header.c(697): ajp_parse_type: got 06 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5916 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5916 for (192.168.0.100) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5916 for worker http://192.168.0.102:8080 [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5916 for (192.168.0.102) [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5916 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:37 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5916 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5918 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5918 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5918 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5918 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 2 in child 5917 for worker ajp://192.168.0.100:8008/coding [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.100:8008/coding already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 2 in child 5917 for (192.168.0.100) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 3 in child 5917 for worker http://192.168.0.102:8080 [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker http://192.168.0.102:8080 already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 3 in child 5917 for (192.168.0.102) [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1818): proxy: grabbed scoreboard slot 4 in child 5917 for worker ajp://192.168.0.102:8008/bork [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1837): proxy: worker ajp://192.168.0.102:8008/bork already initialized [Sun May 06 14:40:38 2012] [debug] proxy_util.c(1934): proxy: initialized single connection worker 4 in child 5917 for (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 04 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(516): ajp_unmarshal_response: status = 200 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(537): ajp_unmarshal_response: Number of headers is = 1 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(599): ajp_unmarshal_response: Header[0] [Content-Type] = [text/xml;charset=utf-8] [Sun May 06 14:42:09 2012] [debug] ajp_header.c(609): ajp_unmarshal_response: ap_set_content_type done [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 03 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(687): ajp_read_header: ajp_ilink_received 05 [Sun May 06 14:42:09 2012] [debug] ajp_header.c(697): ajp_parse_type: got 05 [Sun May 06 14:42:09 2012] [debug] mod_deflate.c(615): [client 188.81.234.2] Zlib: Compressed 447 to 255 : URL /bork/SSOIdentityProviderSoap [Sun May 06 14:42:09 2012] [debug] mod_proxy_ajp.c(570): proxy: got response from (null) (192.168.0.102) [Sun May 06 14:42:09 2012] [debug] proxy_util.c(2029): proxy: AJP: has released connection for (192.168.0.102) [Sun May 06 14:42:09 2012] [info] [client 188.81.234.2] Request body read timeout Was wondering if any one could provide some advice, perhaps even point out any hideous, horrible configuration error? thanks in advance!

    Read the article

  • Exclude specific domains from Apache2 serverAlias while using a catch all *(wildcard) alias

    - by Victor S
    I have a web application that needs to support custom domains, in that regard I have set-up the following name based virtual server: <VirtualHost *:80> ServerName example.com ServerAlias * *.example.com www.example.com example.com RailsEnv production RackEnv production DocumentRoot /srv/www/example/current/public <Directory /srv/www/example/current/public> AllowOverride all Options -MultiViews FollowSymLinks </Directory> ErrorLog /srv/www/example/log/error.log TransferLog /srv/www/example/log/access.log </VirtualHost> Notice the * as the server alias? that catches all the domains on that server. However, I have other sites on this server which I want to be excluded from this list. It is more economical for me to have a list of excluded domains than manually set every domain a user may register with at this service as a serverAlias... Perhaps this is not the best way to go, but I'm looking for help, in the best (relatively simple) way to set up a web-app that may catch any domains, while allowing other specific domains to be routed to different apps. Thanks!

    Read the article

  • Redirect particular hostname from https to httpd in httpd/apache2

    - by webnothing
    I have a webserver that has an ssl certificate applied to a subdomain https://shop.mydomain.com. I also have the hostname http://mydomain.com that has no ssl certificate. When invoking https://mydomain.com, browsers issue a warning that a certificate could not be verified because the webserver is identifying itself as https://shop.mydomain.com. I would like all traffic that hits https://mydomain.com to be redirected to http://mydomain.com, and leave https://shop.mydomain.com as is. My httpd.conf file generally looks like this: < VirtualHost 122.11.11.21:80 > ServerName shop.mydomain.com .. regular old port 80 .. < /VirtualHost > < VirtualHost 122.11.11.21:443 > ServerName shop.mydomain.com .. SSL applies here .. < /VirtualHost > < VirtualHost 122.11.11.21:80 > ServerName mydomain.com .. regular old port 80 .. < /VirtualHost > It does not look as if I have SSL set up for https://mydomain.com yet one can invoke SSL mode and the browser identifies the connection as https://shop.mydomain.com. I need to redirect from https://mydomain.com because for some reason, Google has indexed my website with this url even though it shows a warning. I have tried various methods to get this to redirect and nothing has worked. Any help would be greatly appreciated.

    Read the article

  • listenbacklog directive not working in apache2.2

    - by andrés
    I was trying to make apache 2.2 reject connections if MaxClients was reached, to do this I found the directive ListenBacklog.To test it, I configured apache in the following way: <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 10 ListenBacklog 1 MaxRequestsPerChild 0 </IfModule> I've made a little script in JMeter to test this. The test launchs 50 users in 1 second (it requests a phpinfo page) but none is rejected, they all wait! I don't understand how this directive works... my operating system is Ubuntu.

    Read the article

  • Apache2 Virtual Host with ScriptAlias returning 403

    - by sissonb
    I am trying to reference my libs directory which is a sibling directory to my DocumentRoot. I am using the following ScriptAlias to try to accomplish this. ScriptAlias /libs/ "../libs" But when I go to example.com/libs/ I get a the following error Forbidden You don't have permission to access /libs/ on this server I am able to view the libs directory using the following configuration so I don't think it's a file permission error. <VirtualHost *> ServerName example.com ServerAlias www.example.com DocumentRoot C:/www/libs <VirtualHost *> More relevant httpd.cong setting below <Directory /> Options FollowSymLinks AllowOverride None Order deny,allow Deny from all </Directory> <Directory "C:/www"> Options Indexes FollowSymLinks AllowOverride None Order Deny,Allow Deny from none Allow from all </Directory> NameVirtualHost * <VirtualHost *> ServerName example.com ServerAlias www.example.com DocumentRoot C:/www/example ScriptAlias /libs/ "../libs" <Directory "C:/www/libs"> Options Indexes FollowSymLinks AllowOverride None Options +ExecCGI Order Deny,Allow Deny from none Allow from all </Directory> </VirtualHost>

    Read the article

  • Apache2 URL Rewrite - Second-Level-Domain to the end of URL

    - by Acryl
    i have a site "example.com" and also many other domains like "example1.com", "example2.de", etc. I want that every Second-Level-Domain is rewritten in the following way: example.com/domainredirect=example1.com (when you open example1.com) and example.com/domainredirect=example2.de (when you open example2.de) So the original Second-Level-Domain should be rewritten after "example.com/domainredirect=" Thanks in advance

    Read the article

  • How to return 404 from Apache2 CGI program

    - by fastmonkeywheels
    I'm using mod_rewrite to redirect all incoming requests to a CGI application. I now need to have the application return a 404 if the requested file isn't found. How can I go about this from my program? The first line sent is the content-type while it's the line before that that usually indicates the status (200/404/500, etc).

    Read the article

  • Apache2 Modpython : IOError: Write failed, client closed connection.

    - by llazzaro
    This is the error : [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] mod_python (pid=9528, interpreter='realpage.com', phase='PythonHandler', handler='django.core.handlers.modpython'): Application error [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] ServerName: 'realpage.dom' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] DocumentRoot: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] URI: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Location: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] Directory: None [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Filename: '/htdocs' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] PathInfo: '/' [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] Traceback (most recent call last): [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1537, in HandlerDispatch\n default=default_handler, arg=req, silent=hlist.silent) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1229, in _process_target\n result = _execute_target(config, req, object, arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/mod_python/importer.py", line 1128, in _execute_target\n result = object(arg) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 228, in handler\n return ModPythonHandler()(req) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XXX.248.60] File "/usr/lib/python2.5/site-packages/django/core/handlers/modpython.py", line 220, in call\n req.write(chunk) [Mon Mar 01 12:19:50 2010] [error] [client XXX.XX.248.60] IOError: Write failed, client closed connection. Please! I am sure you need more information in order to find the bug, please tell me what and how to get it. The error is throwing every time!

    Read the article

  • How to avoid apache2 revealing hidden directory and/or file structure

    - by matnagel
    When someone fetches a denied URL that exists, he gets: Forbidden You don't have permission to access /admin/admin.php on this server. Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.9 with Suhosin-Patch Server When someone goes to a URL that does not exist he will get: Not Found The requested URL /notexisting/notthere.php was not found on this server. Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.9 with Suhosin-Patch Server This way someone can find out information about the directory structure in an area, that is actually not open to the public. Is this true? If I were paranoid, what could I do? Just curious.

    Read the article

  • OSX Apache2 Virtual Hosts Proxy Issue

    - by Daven Patel
    I'm using the following httpd-vhosts.conf file to host several sites on my MacBook. Apache Configuration The first two virtual sites (v3.local,ss.local) are giving back the following error messages in the Apache error log: [Thu Aug 30 15:12:04 2012] [error] (61)Connection refused: proxy: HTTP: attempt to connect to [fe80::1]:3002 (localhost) failed [Thu Aug 30 15:12:04 2012] [error] ap_proxy_connect_backend disabling worker for (localhost)] The third site test.local works fine without any issues. I can't seem to find out why the first two sites are responding with the listed issue. What could be causing it and how can it be resolved?

    Read the article

  • PhpMyAdmin::403 error - don't have permission to enter localhost/phpmyadmin/ on Apache2, Fedora 13

    - by George
    I am running an apache 2.17 at a Fedora 13. I did install phpmyadmin from the repos (via yum). It is installed in /usr/share/phpMyAdmin. I did make a symlink from my document root to the /user/share/phpMyadmin. I set 755 permsissions on that folder, set it to be owned by user apache and group apache. And yet, when I try to open http://localhost/phpmyadmin, it gives me the 403 error - you do not have permisssion! I tried also commenting some deny lines in the phpMyAdmin.conf file, no success. Any help would be gladly appreciated.

    Read the article

  • Apache2 ignores ServerAlias

    - by Galen
    the www versions of all my sites work. the non-www version don't work. All non-www versions go to my default vhost (galengrover.com) Here are the first 2 virtual hosts in httpd.conf. ServerName galengrover.com NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/sites/galengrover.com/html ServerName www.galengrover.com ServerAlias galengrover.com </VirtualHost> <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot /var/www/sites/skatevideosonline.net/html ServerName www.skatevideosonline.net ServerAlias skatevideosonline.com </VirtualHost> Im clueless. Thanks

    Read the article

  • apache2 force proxy for specific url on a subdomain

    - by Tony G.
    Hi, I have a site that has dynamic virtual subdomains using mod_rewrite, as defined like this: <VirtualHost *:80> ServerName example.com ServerAlias *.example.com DocumentRoot /var/www/example.com/www RewriteEngine on RewriteCond %{HTTP_HOST} ^[^.]+\.examle.com$ RewriteRule ^(.+) %{HTTP_HOST}$1 [C] RewriteRule ^([^.]+)\.example.com(.*) /var/www/example.com/$1$2 </VirtualHost> The problem is that I want a specific url, say subdomain.example.com/CONTROL/ to point back to www.example.com/ using a proxy (not url redirecting). I have tried adding: RewriteRule ^([^.]+)\.example.com/CONTROL(.*) /var/www/example.com/www$2 [P] But that didn't work. Any ideas?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >