Search Results

Search found 3324 results on 133 pages for 'gb'.

Page 8/133 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Do I need to be worried about these SMART drive temperatures?

  - by Steve Lorimer

  I have 5 hard drives in a machine sitting in a cupboard. /dev/sda is a 500GB Seagate drive, and is the boot disk. /dev/sd{b,c,d,e} are 2TB drives in a raid6 configuration. smartctl is showing significantly higher temperatures (like ~140 degrees celsius) on the raid drives than the boot drive. Do I need to be worried? /dev/sdb and /dev/sde are new Western Digital Black drives (new=1 week) /dev/sdc and /dev/sdd are 5 year old Hitachi drives /dev/sda [SAT], Temperature_Celsius changed from 40 to 39 /dev/sdc [SAT], Temperature_Celsius changed from 142 to 146 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 142 /dev/sdd [SAT], Temperature_Celsius changed from 142 to 146 /dev/sda [SAT], Airflow_Temperature_Cel changed from 61 to 62 /dev/sda [SAT], Temperature_Celsius changed from 39 to 38 /dev/sde [SAT], Temperature_Celsius changed from 107 to 108 /dev/sdb [SAT], Temperature_Celsius changed from 108 to 109 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sdc [SAT], Temperature_Celsius changed from 146 to 150 /dev/sda [SAT], Airflow_Temperature_Cel changed from 62 to 61 /dev/sda [SAT], Temperature_Celsius changed from 38 to 39 Update: Adding detailed drive information as per request: /dev/sda =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Pipeline HD 5900.2 Device Model: ST3500312CS Serial Number: 5VV47HXA LU WWN Device Id: 5 000c50 02aad5ad6 Firmware Version: SC13 User Capacity: 500,107,862,016 bytes [500 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5900 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 1.5 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdb =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1398726 LU WWN Device Id: 5 0014ee 003b8bd25 Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdc =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WSTUD LU WWN Device Id: 5 000cca 369cc9f5d Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sdd =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 7K3000 Device Model: Hitachi HDS723020BLA642 Serial Number: MN1220F30WST4D LU WWN Device Id: 5 000cca 369cc9f48 Firmware Version: MN6OA580 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Size: 512 bytes logical/physical Rotation Rate: 7200 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled /dev/sde =========================== smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.9.10-100.fc17.x86_64] (local build) Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: WDC WD2003FZEX-00Z4SA0 Serial Number: WD-WMC1F1483782 LU WWN Device Id: 5 0014ee 3002d235c Firmware Version: 01.01A01 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Tue Jun 3 10:54:11 2014 EST SMART support is: Available - device has SMART capability. SMART support is: Enabled

  Read the article

• SPARC T4-4 Delivers World Record First Result on PeopleSoft Combined Benchmark

  - by Brian

  Oracle's SPARC T4-4 servers running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved World Record 18,000 concurrent users while executing a PeopleSoft Payroll batch job of 500,000 employees in 43.32 minutes and maintaining online users response time at < 2 seconds. This world record is the first to run online and batch workloads concurrently. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 35% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. This is the first three tier mixed workload (online and batch) PeopleSoft benchmark also processing PeopleSoft payroll batch workload. Performance Landscape PeopleSoft HR Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-2 (db) 18,000 0.944 0.503 43.32 64 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory 5 x 300 GB SAS internal disks 1 x 100 GB and 2 x 300 GB internal SSDs 2 x 10 Gbe HBA Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 2 x 300 GB SAS internal disks 1 x 100 GB internal SSD Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two Oracle PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Management oracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle's PeopleSoft HR and Payroll combined benchmark, www.oracle.com/us/solutions/benchmark/apps-benchmark/peoplesoft-167486.html, results 09/30/2012.

  Read the article

• Software installed on root partition or on home partition

  - by Tim

  I am planning to install some big softwares such as Matlab (4GB), Mathematica (4GB) on my Ubuntu partitions. I was wondering if I installed them on my home partition, when I reinstall Ubuntu without touching the home partition, will the softwares still be runnable after reinstallation? what are the advantage and disadvantages of installing softwares on root partition and of on home partition? with your answer to the previous questions, what are some reasonable plans for the sizes of root partition and of home partition? Note that I would like to learn programming in C, C++, Java, Python, Lisp, databases under both Ubuntu and Windows, and no games. My laptop has around 230 GB, where I plan to install both Windows and Ubuntu, and reserve 40 GB for Ubuntu (three partitions: swap, root and home), 110 GB for NTFS partition shared between the two OSes, 70 GB for Windows OS partition, and 10 GB that can be added to any of the above partitions. I will change my plan according to your suggestions. Thanks and regards!

  Read the article

• apt-get not working

  - by Dave Daniels

  Everything I try with apt-get fails. I am installing Ubuntu server for the first time. It is version 12.04 LTS. When I run: apt-get update I get failed to fetch http://gb.whatever goes here...... If I run apt-get install install build-essential I get "unable to locate package build-essential" I have looked at the sources.list but do not know what should and shouldn't be in there. This is the current content of sources.list: # See help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://gb.archive.ubuntu.com/ubuntu precise main restricted deb-src http://gb.archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://gb.archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://gb.archive.ubuntu.com/ubuntu precise-updates main restricted

  Read the article

• Increase the /home partition without losing the data

  - by sagarchalise

  I have a 320 GB harddrive with three partitions / , /home and swap. What I want to do is change the size of swap which now is 8 GB to 5 GB and append that 3 GB to my /home partition. I have searched through the web for this but don't seem to find a proper way to increase my home partition. Can anyone help ? By the way, I know how to decrease size of swap I just need the proper way to append that unallocated 3 GB of space to my /home partition without loosing the data. Thank You

  Read the article

• Why do I get a 403 error when accessing my apache server?

  - by nishan

  Im running Ubuntu 12.04 LTS on a system with 2 GB RAM and a 500 GB HDD. My hard drive has 4 partitions: Partition 1 = 40 gb Windows (NTFS, lable = win32) Partition 2 = 320 gb Windows (FAT label = common) Partition 3 = 40 gb Ubuntu (EXT4) I installed apached2. Then, to change its default www directory, I ran gksu gedit /etc/apache2/sites-enabled/000-default and, in the editor, changed the location to /media/common/www. After that I ran these commands in a terminal: chmod 777 /media/common/www chmod 777 /media/common/www/*.* After that I ran: firefox 127.0.0.1/index.php It said: Forbidden You don't have permission to access / on this server. Apache/2.2.22 (Ubuntu) Server at 127.0.0.1 Port 80 Before my changes it was working fine. How can I run my websites?

  Read the article

• partitioning ssd +hdd

  - by ALdaperan

  I recently bought an ssd drive 128 gb and i would like yo have your suggestions on partitiong and installing ubuntu 12.10 on it. First of all my drives are : HDD 640 Gb SSD Samsung 830 series 128 Gb Whats the best partitiong for theese drives ? 128 Gb is sure enormous amount of space only for / (root) . Is it a good choice if i make 2 partitions on ssd (20 Gb / and 100 /home) and leave hdd as backub drive for my data (files,movies,music etc) ? In this case what mount point must have hdd ? Can you suggest me the best partitiong for my drives ?

  Read the article

• Das T5-4 TPC-H Ergebnis naeher betrachtet

  - by Stefan Hinker

  Inzwischen haben vermutlich viele das neue TPC-H Ergebnis der SPARC T5-4 gesehen, das am 7. Juni bei der TPC eingereicht wurde.  Die wesentlichen Punkte dieses Benchmarks wurden wie gewohnt bereits von unserer Benchmark-Truppe auf  "BestPerf" zusammengefasst.  Es gibt aber noch einiges mehr, das eine naehere Betrachtung lohnt. Skalierbarkeit Das TPC raet von einem Vergleich von TPC-H Ergebnissen in unterschiedlichen Groessenklassen ab.  Aber auch innerhalb der 3000GB-Klasse ist es interessant: SPARC T4-4 mit 4 CPUs (32 Cores mit 3.0 GHz) liefert 205,792 QphH. SPARC T5-4 mit 4 CPUs (64 Cores mit 3.6 GHz) liefert 409,721 QphH. Das heisst, es fehlen lediglich 1863 QphH oder 0.45% zu 100% Skalierbarkeit, wenn man davon ausgeht, dass die doppelte Anzahl Kerne das doppelte Ergebnis liefern sollte.  Etwas anspruchsvoller, koennte man natuerlich auch einen Faktor von 2.4 erwarten, wenn man die hoehere Taktrate mit beruecksichtigt.  Das wuerde die Latte auf 493901 QphH legen.  Dann waere die SPARC T5-4 bei 83%.  Damit stellt sich die Frage: Was hat hier nicht skaliert?  Vermutlich der Plattenspeicher!  Auch hier lohnt sich eine naehere Betrachtung: Plattenspeicher Im Bericht auf BestPerf und auch im Full Disclosure Report der TPC stehen einige interessante Details zum Plattenspeicher und der Konfiguration.   In der Konfiguration der SPARC T4-4 wurden 12 2540-M2 Arrays verwendet, die jeweils ca. 1.5 GB/s Durchsatz liefert, insgesamt also eta 18 GB/s.  Dabei waren die Arrays offensichtlich mit jeweils 2 Kabeln pro Array direkt an die 24 8GBit FC-Ports des Servers angeschlossen.  Mit den 2x 8GBit Ports pro Array koennte man so ein theoretisches Maximum von 2GB/s erreichen.  Tatsaechlich wurden 1.5GB/s geliefert, was so ziemlich dem realistischen Maximum entsprechen duerfte. Fuer den Lauf mit der SPARC T5-4 wurden doppelt so viele Platten verwendet.  Dafuer wurden die 2540-M2 Arrays mit je einem zusaetzlichen Plattentray erweitert.  Mit dieser Konfiguration wurde dann (laut BestPerf) ein Maximaldurchsatz von 33 GB/s erreicht - nicht ganz das doppelte des SPARC T4-4 Laufs.  Um tatsaechlich den doppelten Durchsatz (36 GB/s) zu liefern, haette jedes der 12 Arrays 3 GB/s ueber seine 4 8GBit Ports liefern muessen.  Im FDR stehen nur 12 dual-port FC HBAs, was die Verwendung der Brocade FC Switches erklaert: Es wurden alle 4 8GBit ports jedes Arrays an die Switches angeschlossen, die die Datenstroeme dann in die 24 16GBit HBA ports des Servers buendelten.  Das theoretische Maximum jedes Storage-Arrays waere nun 4 GB/s.  Wenn man jedoch den Protokoll- und "Realitaets"-Overhead mit einrechnet, sind die tatsaechlich gelieferten 2.75 GB/s gar nicht schlecht.  Mit diesen Zahlen im Hinterkopf ist die Verdopplung des SPARC T4-4 Ergebnisses eine gute Leistung - und gleichzeitig eine gute Erklaerung, warum nicht bis zum 2.4-fachen skaliert wurde. Nebenbei bemerkt: Weder die SPARC T4-4 noch die SPARC T5-4 hatten in der gemessenen Konfiguration irgendwelche Flash-Devices. Mitbewerb Seit die T4 Systeme auf dem Markt sind, bemuehen sich unsere Mitbewerber redlich darum, ueberall den Eindruck zu hinterlassen, die Leistung des SPARC CPU-Kerns waere weiterhin mangelhaft.  Auch scheinen sie ueberzeugt zu sein, dass (ueber)grosse Caches und hohe Taktraten die einzigen Schluessel zu echter Server Performance seien.  Wenn ich mir nun jedoch die oeffentlichen TPC-H Ergebnisse ansehe, sehe ich dies: TPC-H @3000GB, Non-Clustered Systems System QphH SPARC T5-4 3.6 GHz SPARC T5 4/64 – 2048 GB 409,721.8 SPARC T4-4 3.0 GHz SPARC T4 4/32 – 1024 GB 205,792.0 IBM Power 780 4.1 GHz POWER7 8/32 – 1024 GB 192,001.1 HP ProLiant DL980 G7 2.27 GHz Intel Xeon X7560 8/64 – 512 GB 162,601.7 Kurz zusammengefasst: Mit 32 Kernen (mit 3 GHz und 4MB L3 Cache), liefert die SPARC T4-4 mehr QphH@3000GB ab als IBM mit ihrer 32 Kern Power7 (bei 4.1 GHz und 32MB L3 Cache) und auch mehr als HP mit einem 64 Kern Intel Xeon System (2.27 GHz und 24MB L3 Cache).  Ich frage mich, wo genau SPARC hier mangelhaft ist? Nun koennte man natuerlich argumentieren, dass beide Ergebnisse nicht gerade neu sind.  Nun, in Ermangelung neuerer Ergebnisse kann man ja mal ein wenig spekulieren: IBMs aktueller Performance Report listet die o.g. IBM Power 780 mit einem rPerf Wert von 425.5.  Ein passendes Nachfolgesystem mit Power7+ CPUs waere die Power 780+ mit 64 Kernen, verfuegbar mit 3.72 GHz.  Sie wird mit einem rPerf Wert von  690.1 angegeben, also 1.62x mehr.  Wenn man also annimmt, dass Plattenspeicher nicht der limitierende Faktor ist (IBM hat mit 177 SSDs getestet, sie duerfen das gerne auf 400 erhoehen) und IBMs eigene Leistungsabschaetzung zugrunde legt, darf man ein theoretisches Ergebnis von 311398 QphH@3000GB erwarten.  Das waere dann allerdings immer noch weit von dem Ergebnis der SPARC T5-4 entfernt, und gerade in der von IBM so geschaetzen "per core" Metric noch weniger vorteilhaft. In der x86-Welt sieht es nicht besser aus.  Leider gibt es von Intel keine so praktischen rPerf-Tabellen.  Daher muss ich hier fuer eine Schaetzung auf SPECint_rate2006 zurueckgreifen.  (Ich bin kein grosser Fan von solchen Kreuz- und Querschaetzungen.  Insb. SPECcpu ist nicht besonders geeignet, um Datenbank-Leistung abzuschaetzen, da fast kein IO im Spiel ist.)  Das o.g. HP System wird bei SPEC mit 1580 CINT2006_rate gelistet.  Das bis einschl. 2013-06-14 beste Resultat fuer den neuen Intel Xeon E7-4870 mit 8 CPUs ist 2180 CINT2006_rate.  Das ist immerhin 1.38x besser.  (Wenn man nur die Taktrate beruecksichtigen wuerde, waere man bei 1.32x.)  Hier weiter zu rechnen, ist muessig, aber fuer die ungeduldigen Leser hier eine kleine tabellarische Zusammenfassung: TPC-H @3000GB Performance Spekulationen System QphH* Verbesserung gegenueber der frueheren Generation SPARC T4-4 32 cores SPARC T4 205,792 2x SPARC T5-464 cores SPARC T5 409,721 IBM Power 780 32 cores Power7 192,001 1.62x IBM Power 780+ 64 cores Power7+  311,398* HP ProLiant DL980 G764 cores Intel Xeon X7560 162,601 1.38x HP ProLiant DL980 G780 cores Intel Xeon E7-4870    224,348* * Keine echten Resultate  - spekulative Werte auf der Grundlage von rPerf (Power7+) oder SPECint_rate2006 (HP) Natuerlich sind IBM oder HP herzlich eingeladen, diese Werte zu widerlegen.  Aber stand heute warte ich noch auf aktuelle Benchmark Veroffentlichungen in diesem Datensegment. Was koennen wir also zusammenfassen? Es gibt einige Hinweise, dass der Plattenspeicher der begrenzende Faktor war, der die SPARC T5-4 daran hinderte, auf jenseits von 2x zu skalieren Der Mythos, dass SPARC Kerne keine Leistung bringen, ist genau das - ein Mythos.  Wie sieht es umgekehrt eigentlich mit einem TPC-H Ergebnis fuer die Power7+ aus? Cache ist nicht der magische Performance-Schalter, fuer den ihn manche Leute offenbar halten. Ein System, eine CPU-Architektur und ein Betriebsystem jenseits einer gewissen Grenze zu skalieren ist schwer.  In der x86-Welt scheint es noch ein wenig schwerer zu sein. Was fehlt?  Nun, das Thema Preis/Leistung ueberlasse ich gerne den Verkaeufern ;-) Und zu guter Letzt: Nein, ich habe mich nicht ins Marketing versetzen lassen.  Aber manchmal kann ich mich einfach nicht zurueckhalten... Disclosure Statements The views expressed on this blog are my own and do not necessarily reflect the views of Oracle. TPC-H, QphH, $/QphH are trademarks of Transaction Processing Performance Council (TPC). For more information, see www.tpc.org, results as of 6/7/13. Prices are in USD. SPARC T5-4 409,721.8 QphH@3000GB, $3.94/QphH@3000GB, available 9/24/13, 4 processors, 64 cores, 512 threads; SPARC T4-4 205,792.0 QphH@3000GB, $4.10/QphH@3000GB, available 5/31/12, 4 processors, 32 cores, 256 threads; IBM Power 780 QphH@3000GB, 192,001.1 QphH@3000GB, $6.37/QphH@3000GB, available 11/30/11, 8 processors, 32 cores, 128 threads; HP ProLiant DL980 G7 162,601.7 QphH@3000GB, $2.68/QphH@3000GB available 10/13/10, 8 processors, 64 cores, 128 threads. SPEC and the benchmark names SPECfp and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. Results as of June 18, 2013 from www.spec.org. HP ProLiant DL980 G7 (2.27 GHz, Intel Xeon X7560): 1580 SPECint_rate2006; HP ProLiant DL980 G7 (2.4 GHz, Intel Xeon E7-4870): 2180 SPECint_rate2006,

  Read the article

• How to Recover HDD Formatted by "Create a Recovery Drive" Tool of Windows 8.1?

  - by ide

  I have 2 TB USB HDD which had these drives F: about 1 TB with 750 GB data H: about 120 GB with 60 GB data I: about 780 GB with 250 GB data (For TV: It was raw in Windows but visible in the Smart TV) I took 521 MB from last part of H to get new G drive. Then I run "Create a Recovery Drive" tool of Windows 8.1 and chose G drive. It said all data in the drive will be deleted. I thought it is just G drive but it deleted my whole HDD. It created 32 GB new F drive with writing 337 MB on it and rest of HDD is unallocated. I tried these programs to get my first 3 drives but non of them helped for getting 1st partition. TestDisk MiniTool Partition Wizard Home Edition EaseUS Partition Master 9.2.2 (I deleted new F drive volume because it scans only unallocated part) Recuva PC Inspector File Recovery

  Read the article

• How to use Hardware RAID in Ubuntu Server

  - by user2071938

  I have an Adaptec RAID-Controller and created an RAID-1(Mirroring) succesfully. Now I have installed Ubuntu Server 12.04.3. When I type fdisk -l I get this output: bf@fileserver:~$ sudo fdisk -l Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sda doesn't contain a valid partition table Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0004c454 Device Boot Start End Blocks Id System /dev/sdc1 * 2048 499711 248832 83 Linux /dev/sdc2 501758 156301311 77899777 5 Extended /dev/sdc5 501760 156301311 77899776 8e Linux LVM Disk /dev/mapper/fileserver--vg-root: 75.6 GB, 75606523904 bytes 255 heads, 63 sectors/track, 9191 cylinders, total 147668992 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-root doesn't contain a valid partition table Disk /dev/mapper/ddf1_Data: 1000.1 GB, 1000065728512 bytes 255 heads, 63 sectors/track, 121584 cylinders, total 1953253376 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/mapper/ddf1_Data doesn't contain a valid partition table Disk /dev/mapper/fileserver--vg-swap_1: 4160 MB, 4160749568 bytes 255 heads, 63 sectors/track, 505 cylinders, total 8126464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/fileserver--vg-swap_1 doesn't contain a valid partition table The 80 GB HDD is for the System The 1000.2 GB HDD should be for my data. But I'm a bit confused becauser there are listed two 1000.2 GB HDDs, due the Hardware RAID shoudln't there be only one HDD vissible to the OS? (I have two 1000.2 GB HDDs in an Raid-1 Array) dmraid gives me bf@fileserver:~$ sudo dmraid -r /dev/sdb: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 /dev/sda: ddf1, ".ddf1_disks", GROUP, ok, 1953253376 sectors, data@ 0 so It seems to be ok? But how do I partitionate this disks and which one should I mount(sdb or sda?) Hope you can help me thx Florian

  Read the article

• Weird problem, special characters coming after formatting the hard drive, computer isn't starting 0_

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting (quick format) and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• What database works well with 200+GB of data?

  - by taw

  I've been using mysql (with innodb; on Amazon rds) because it's sort of universal default, but it's been ridiculously under-performing, and tweaking it only delays the inevitable. The data is mostly relatively short (<1kB of bytes each) blobs information about 100Ms of urls. There is (or should be, mysql cannot seem to handle it) very high amount of insert / update / retrieve but few complex queries - not that complex queries wouldn't be useful, but because mysql is so slow that it's far faster to get the data out, process it locally, and cache the results somewhere. I can keep tweaking mysql and throwing more hardware at it, but it seems increasingly futile. So what are the options? SQL/relational model/etc. optional - anything will do as long as it's fast, networked, and language-independent.

  Read the article

• Weird problem, special characters after formatting the hard drive, computer not starting 0_o

  - by m3taspl0it

  Hya friends , Last night my computer was working fine. But today when i came back from college and started it , it was starting fine but after sometime it's getting restarted , again and again getting restarted at different points , so i tried to boot it in safe mode but same problem. Now after all this , i finally decided to format the drive C (it is in 80 GB) and load new OS windows XP3. After formatting and loading xp3 sufficient files , when it was getting rebooted for copying the actual os files , it hung and a weird screen came. I've also attached the pic of error : http://www.postimage.org/image.php?v=gxz1vKS My specs : P4 3.0 Ghz 2 GB RAM (2x 512 mb and 1 GB) 3 hard drives { 80 GB (5 years old around) 320 GB ( 2 years old around) 500 GB ( recently bought) 256 MB graphics card any help is very appreciated , thanks

  Read the article

• Missing disk space in Windows XP

  - by Jørn Schou-Rode

  On my mother's Lenovo laptop, Windows XP claims that the hard drive is almost full. According to the properties window, 52.7 out of 55.2 GB is in use: By deleting temp files from Internet Explorer, System Restore, Recycle bin, Windows Update, System Cleanup, I managed to free up about one GB. That's still 50 GB in use, which still is a lot more than I expected. Hence, I gave good old WinDirStat a spin, and here's the output: It might be hard to read here, but the first line says that the total amount of disk space in use on drive C is 24.3 GB. So Windows claims usage of 52.7 GB and WinDirStat can only account for 24.3 GB. Where is the other half of that disk space being used? I hope someone has an answer, or some tricks or tips to do further research. UPDATE: The laptop in question has an SSD hard drive. I am aware that these disk (at least the earlier ones) have a limited life-time. Could the symptoms described be caused by wear and tear on the SSD?

  Read the article

• When should I use SATA 6gb/s?

  - by Gili

  I purchased a Baraccuda hard-drive (model ST3000DM001) that supports a maximum read transfer rate of 210 MB/s and SATA 1.5/3/6 Gb/s. My motherboard has a limited number of 6 Gb/s ports so I'd like to reserve them for when it's really necessary. When does a hard-drive benefit from a SATA 6 Gb/s port? Doesn't it require a transfer speed of at least 375 MB/s to surpass the limit of SATA 3 Gb/s? Are there any other benefits of SATA 6 Gb/s vs 3 Gb/s ports?

  Read the article

• Large recovery partitions

  - by Unsigned

  Is there any good reason as to why factory restore partitions are generally much larger than they need to be? Examples I have found in my own experience: Dell XPS laptop Partition: 13.67 GB Used: 6.68 GB Dell Inspiron laptop Partition: 14.7 GB Used: 7.2 GB Toshiba laptop Partition: 15.3 GB Used: 9 GB In all cases, shrinking the partition to only slightly more than the Used space had no ill effects on future factory restorations. Why the exorbitant amount of extra space, given that neither of the three computers ever writes any data to the recovery partition? Is there a good reason I'm overlooking?

  Read the article

• How to upload 10 Gb of data to MySQL programmatically without crashing like on PHPMyAdmin?

  - by asksuperuser

  I'm very surprised that it seems impossible to upload more than a few megabytes of data to mysql database through PHPMyAdmin whereas I can upload a msaccess table easily up to 2 Gigabytes. So is there any script in php or anything that can allow to do so unlike phpmyadmin ?

  Read the article

• Configure Dual Boot, Windows 7 and Ubuntu 12.04 with or without EFI

  - by Keroak

  I have just installed Ubuntu 12.04 on a laptop with Windows 7 but I don't get to boot from Ubuntu. First, during the installation I made these partitions (may be too many): /dev/sda1 FAT32 SYSTEM 200Mb boot (EFI boot, i guess) /dev/sda2 unknown file system 128 Mb msftres (Windows Boot Manager) /dev/sda3 NTFS OS 100 Gb (Windows 7) /dev/sda4 NTFS DATOS 315 Gb (Data partition) /dev/sda5 ext4 28 Gb (/home) /dev/sda8 unknown file system 1 Gb biog_grub (i'm not very sure why i made this one) /dev/sda6 ext4 17 Gb (/ Ubuntu 12.03 installed withou errors aparently) /dev/sda7 linex-swap 2 GB (swap) I can boot from Windows perfectly. Actually I tried to configure Windows Boot Manager with EasyBCD but it doesn't recognize any boot entry. Anyway, I added an Ubuntu Entry and it configured it automatically. Now I have boot entries the Windows 7 one that appear to work and the Ubuntu 12.04 that it prompt a "No application found" message. I re-started from a USB with Ubuntu and tried to fix GRUB from the command-line and with boot-repair. No results. As far as I understand I have to tell the Windows Boot Manager where my Ubuntu boot loader is. So I have two problems: Actually, I don't know where my Ubuntu boot loader, GRUB or GRUB2 or whatever, is. I don't know how to set my Ubuntu entry in Windows Boot Manager. I guess using BCDedit.exe as EasyBCD didn't show me the entries. Anyway, I don't know what parameters to use. I read several articles about it but i didn't find out anything useful.

  Read the article

• Ubuntu 12.04 installation on GPT + RAID going into grub rescue

  - by Proy

  I have two 2TB disks. I am installing Ubuntu 12.04 using the alternate version of the server cd. On the partitioning page I have done my partitioning as follows /dev/sda1 - 32 MB - bios_grub /dev/sda2 - 50 GB -raid device /dev/sda3 - 8 GB -raid device /dev/sda4 - Balance full GB - raid device /dev/sdb1 - 32 MB - bios_grub /dev/sdb2 - 50 GB -raid device /dev/sdb3 - 8 GB -raid device /dev/sdb4 - Balance full GB - raid device After this I have setup raid devices /dev/md0 for /(/dev/sda2 + /dev/sdb2) for / ext4 /dev/md1 for swap( /dev/sda3 + /dev/sdb3)for swap /dev/md2 for /home(/dev/sda4 + /dev/sdb4)for /home ext4 The installation finishes it shows that it is installing grub to /dev/sda and /dev/sdb. But once the system reboots it falls into grub rescue mode. on doing ls I can not see the md devices only hd once. I also tried booting into rescue mode with the install cd and doing grub-install /dev/sda and /dev/sdb. What am I doing wrong ? Why is grub2 not detecting the raid revices ? UPDATE: I just did the same steps with Ubuntu 10.04 and it worked perfectly fine. I wiped out the RAID and partitions and everything and did it from scratch. I think the issue is with Ubuntu 12.04 and the way it partitions 2 TB disks

  Read the article

• What "file system" is supported by Windows and Linux?

  - by Skiroid

  I'm setting up a media centre for my living room so that I'm able to watch downloaded films and TV shows on the big screen. The media centre is an old small computer which will have XBMCbuntu 12 installed on it. Right now, the media centre has a 300 GB HDD partitioned into two: 1) Ext4 50 GB (where I'll install the OS) 2) swap 6 GB (swap area) I'm wanting a third partition which I can store all my media on to. This partition will fill the rest of my HDD. Although, I'm stuck on which file system I should set it to. I need the file system to be fully compatible with Windows as I'm going to be removing the HDD from the media centre and plugging it into my main PC, running Windows 8, to transfer the media onto it. I can't transfer over Wi-Fi as the media centre won't be connected to the Internet. My options are: Ext4 journaling, Ext3 journaling, Ext2 journaling, ReiserFS journaling, btrfs journaling, JFS journaling, XFS journaling, FAT16 and FAT32. I know that FAT32 is compatible with Windows but it can only hold files that are 4 GB or less and my films are well over 4 GB. Some more than 10 GB. Is there a file system I can use which is supported by Linux and pops up under Computer in Windows?

  Read the article

• Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

  - by Joe

  After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

  Read the article

• World Record Oracle E-Business Consolidated Workload on SPARC T4-2

  - by Brian

  Oracle set a World Record for the Oracle E-Business Suite Standard Medium multiple-online module benchmark using Oracle's SPARC T4-2 and SPARC T4-4 servers which ran the application and database. Oracle's SPARC T4 servers demonstrate performance leadership and world-record results on Oracle E-Business Suite Applications R12 OLTP benchmark by publishing the first result using multiple concurrent online application modules with Oracle Database 11g Release 2 running Solaris.   This results shows that a multi-tier configuration of SPARC T4 servers running the Oracle E-Business Suite R12.1.2 application and Oracle Database 11g Release 2 is capable of supporting 4,100 online users with outstanding response-times, executing a mix of complex transactions consolidating 4 Oracle E-Business modules (iProcurement, Order Management, Customer Service and HR Self-Service).   The SPARC T4-2 server in the application tier utilized about 65% and the SPARC T4-4 server in the database tier utilized about 30%, providing significant headroom for additional Oracle E-Business Suite R12.1.2 processing modules, more online users, and future growth.   Oracle E-Business Suite Applications were run in Oracle Solaris Containers on SPARC T4 servers and provides a consolidation platform for multiple E-Business instances.   Performance Landscape Multiple Online Modules (Self-Service, Order-Management, iProcurement, Customer-Service) Medium Configuration System Users AverageResponse Time 90th PercentileResponse Time SPARC T4-2 4,100 2.08 sec 2.52 sec Configuration Summary Application Tier Configuration: 1 x SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 3 x 300 GB internal disks Oracle Solaris 10 Oracle E-Business Suite 12.1.2 Database Tier Configuration: 1 x SPARC T4-4 server 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 2 x 300 GB internal disks Oracle Solaris 10 Oracle Solaris Containers Oracle Database 11g Release 2 Storage Configuration: 1 x Sun Storage F5100 Flash Array (80 x 24 GB flash modules) Benchmark Description The Oracle R12 E-Business Suite Standard Benchmark combines online transaction execution by simulated users with multiple online concurrent modules to model a typical scenario for a global enterprise. The online component exercises the common UI flows which are most frequently used by a majority of our customers. This benchmark utilized four concurrent flows of OLTP transactions, for Order to Cash, iProcurement, Customer Service and HR Self-Service and measured the response times. The selected flows model simultaneous business activities inclusive of managing customers, services, products and employees. See Also Oracle R12 E-Business Suite Standard Benchmark Results Oracle R12 E-Business Suite Standard Benchmark Overview Oracle R12 E-Business Benchmark Description E-Business Suite Applications R2 (R12.1.2) Online Benchmark - Using Oracle Database 11g on Oracle's SPARC T4-2 and Oracle's SPARC T4-4 Servers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN Oracle E-Business Suite oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle E-Business Suite R12 medium multiple-online module benchmark, SPARC T4-2, SPARC T4, 2.85 GHz, 2 chips, 16 cores, 128 threads, 256 GB memory, SPARC T4-4, SPARC T4, 3.0 GHz, 4 chips, 32 cores, 256 threads, 256 GB memory, average response time 2.08 sec, 90th percentile response time 2.52 sec, Oracle Solaris 10, Oracle Solaris Containers, Oracle E-Business Suite 12.1.2, Oracle Database 11g Release 2, Results as of 9/30/2012.

  Read the article

• Oracle TimesTen In-Memory Database Performance on SPARC T4-2

  - by Brian

  The Oracle TimesTen In-Memory Database is optimized to run on Oracle's SPARC T4 processor platforms running Oracle Solaris 11 providing unsurpassed scalability, performance, upgradability, protection of investment and return on investment. The following demonstrate the value of combining Oracle TimesTen In-Memory Database with SPARC T4 servers and Oracle Solaris 11: On a Mobile Call Processing test, the 2-socket SPARC T4-2 server outperforms: Oracle's SPARC Enterprise M4000 server (4 x 2.66 GHz SPARC64 VII+) by 34%. Oracle's SPARC T3-4 (4 x 1.65 GHz SPARC T3) by 2.7x, or 5.4x per processor. Utilizing the TimesTen Performance Throughput Benchmark (TPTBM), the SPARC T4-2 server protects investments with: 2.1x the overall performance of a 4-socket SPARC Enterprise M4000 server in read-only mode and 1.5x the performance in update-only testing. This is 4.2x more performance per processor than the SPARC64 VII+ 2.66 GHz based system. 10x more performance per processor than the SPARC T2+ 1.4 GHz server. 1.6x better performance per processor than the SPARC T3 1.65 GHz based server. In replication testing, the two socket SPARC T4-2 server is over 3x faster than the performance of a four socket SPARC Enterprise T5440 server in both asynchronous replication environment and the highly available 2-Safe replication. This testing emphasizes parallel replication between systems. Performance Landscape Mobile Call Processing Test Performance System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 218,400 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 162,900 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 80,400 TimesTen Performance Throughput Benchmark (TPTBM) Read-Only System Processor Sockets/Cores/Threads Tps SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 7.9M SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 6.5M M4000 SPARC64 VII+, 2.66 GHz 4 16 32 3.1M T5440 SPARC T2+, 1.4 GHz 4 32 256 3.1M TimesTen Performance Throughput Benchmark (TPTBM) Update-Only System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 547,800 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 363,800 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 240,500 TimesTen Replication Tests System Processor Sockets/Cores/Threads Asynchronous 2-Safe SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 38,024 13,701 SPARC T5440 SPARC T2+, 1.4 GHz 4 32 256 11,621 4,615 Configuration Summary Hardware Configurations: SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 4 x 300 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head SPARC T3-4 server 4 x SPARC T3 processors, 1.6 GHz 512 GB memory 1 x 8 Gbs FC Qlogic HBA 8 x 146 GB internal disks 1 x Sun Fire X4275 server configured as COMSTAR head SPARC Enterprise M4000 server 4 x SPARC64 VII+ processors, 2.66 GHz 128 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 2 x 146 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head Software Configuration: Oracle Solaris 11 11/11 Oracle TimesTen 11.2.2.4 Benchmark Descriptions TimesTen Performance Throughput BenchMark (TPTBM) is shipped with TimesTen and measures the total throughput of the system. The workload can test read-only, update-only, delete and insert operations as required. Mobile Call Processing is a customer-based workload for processing calls made by mobile phone subscribers. The workload has a mixture of read-only, update, and insert-only transactions. The peak throughput performance is measured from multiple concurrent processes executing the transactions until a peak performance is reached via saturation of the available resources. Parallel Replication tests using both asynchronous and 2-Safe replication methods. For asynchronous replication, transactions are processed in batches to maximize the throughput capabilities of the replication server and network. In 2-Safe replication, also known as no data-loss or high availability, transactions are replicated between servers immediately emphasizing low latency. For both environments, performance is measured in the number of parallel replication servers and the maximum transactions-per-second for all concurrent processes. See Also SPARC T4-2 Server oracle.com OTN Oracle TimesTen In-Memory Database oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 1 October 2012.

  Read the article

• Can't re-mount existing RAID10 on Ubuntu

  - by Zoran

  I saw similar questions, but didn't find what solution to my problem. After power-cut, one of RAID10 (4 disks were) appears to be malfunctioning. I make tha array active one, but can not mount it. Always the same error: mount: you must specify the filesystem type So, here is what I have when type mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Tue Sep 1 11:00:40 2009 Raid Level : raid10 Array Size : 1465148928 (1397.27 GiB 1500.31 GB) Used Dev Size : 732574464 (698.64 GiB 750.16 GB) Raid Devices : 4 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Mon Jun 11 09:54:27 2012 State : clean, degraded Active Devices : 3 Working Devices : 3 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : 1a02e789:c34377a1:2e29483d:f114274d Events : 0.166 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 0 0 1 removed 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde At the /etc/mdadm/mdadm.conf I have by default, scan all partitions (/proc/partitions) for MD superblocks. alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes automatically tag new arrays as belonging to the local system HOMEHOST <system> instruct the monitoring daemon where to send mail alerts MAILADDR root definitions of existing MD arrays ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d This file was auto-generated... So, my question is, how can I mount md0 array (md1 has been mounted without problem) in order to preserve existing data? One more thing, fdisk -l command gives the following result: Disk /dev/sdb: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/sdb1 * 1 88217 708603021 83 Linux /dev/sdb2 88218 91201 23968980 5 Extended /dev/sdb5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdc: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0008f8ae Device Boot Start End Blocks Id System /dev/sdc1 1 88217 708603021 83 Linux /dev/sdc2 88218 91201 23968980 5 Extended /dev/sdc5 88218 91201 23968948+ 82 Linux swap / Solaris Disk /dev/sdd: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x4be1abdb Device Boot Start End Blocks Id System Disk /dev/sde: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xa4d5632e Device Boot Start End Blocks Id System Disk /dev/sdf: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/sdg: 750.1 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Disk /dev/md1: 750.1 GB, 750156251136 bytes 2 heads, 4 sectors/track, 183143616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Disk identifier: 0xdacb141c Device Boot Start End Blocks Id System Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: ignoring extra data in partition table 5 Warning: invalid flag 0x7b6e of partition table 5 will be corrected by w(rite) Disk /dev/md0: 1500.3 GB, 1500312502272 bytes 255 heads, 63 sectors/track, 182402 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x660a6799 Device Boot Start End Blocks Id System /dev/md0p1 * 1 88217 708603021 83 Linux /dev/md0p2 88218 91201 23968980 5 Extended /dev/md0p5 ? 121767 155317 269488144 20 Unknown And one more thing. When using mdadm --examine command, here ise result: mdadm -v --examine --scan /dev/sdb /dev/sdc /dev/sdd /dev/sde /dev/sdf /dev/sd ARRAY /dev/md1 level=raid1 num-devices=2 UUID=9b592be7:c6a2052f:2e29483d:f114274d devices=/dev/sdf ARRAY /dev/md0 level=raid10 num-devices=4 UUID=1a02e789:c34377a1:2e29483d:f114274d devices=/dev/sdb,/dev/sdc,/dev/sdd,/dev/sde md0 has 3 devices which are active. Can someone instruct me how to solve this issue? If it is possible, I would like not to removing faulty HDD. Please advise

  Read the article

• Simple Scripting for your Exalogic Storage

  - by Trond Strømme

  As part of my job in Oracle ACS (Advanced Customer Services) I'm handling lots of different systems and customers. Among the recent systems I worked with have been Oracle's Exalogic engineered systems. One of the things I'd never had much exposure to as a system developer/architect/middleware guy/Java dude has been storage; outside of consuming it for my photography needs.. Well, I'm always ready for a new challenge... I'd downloaded the 7000 series storage simulator when it was released in the good old Sun days, found it fun and instructive to play around with, but as I never touched storage in any way (besides consuming it..) I forgot about it. A couple of years ago when I started working with Exalogic engineered systems it again came into light as an invaluable learning and testing tool for the embedded storage in an Exalogic;  Oracle's Sun ZFS Storage 7320 Appliance.  aaaanyway... I've been "booted" into a part-time role as the interim storage/system admin/middleware/Java guy for a client and found I needed to create the occasional report or summary or whatever.. of what's using the storage in the 7320 (as default configured for an Exalogic, 40T of disk in a mirrored configuration, yielding 18T of actual space.) Reading the nice documentation and some articles on the Oracle Technology Network I saw great possibilities with the embedded ECMAScript3/JavaScript engine in the 7000 series.  In my personal opinion anyone who's dealing with Exalogic administration, or exposed to any of the 7000 series of storage appliances and servers that Oracle offers should have a VirtualBox instance of it kicking around. For development and testing it's a fantastic tool. (It can save you from explaining (most) of the embarrassing FAILS you can do if you test something in a production system to your management...) So download, and install.  A small sidestep, if after firing up the 7000 series simulator in VirtualBox you've forgotten what it's IP address is, the following will sort you out if you log in directly via the running VirtualBox VM. So in my case I can ssh to 192.168.56.101 or point a browser to https://192.168.56.101:215 to log into the storage appliance. One simple way of executing a script on the 7320 is to ssh to the device and redirecting a file with the script in it to ssh. ssh [email protected] < myscript.js One question I got from my client and the people who will take over the systems was: "how can we see the quotas and allocations for all projects/shares in one easy go so we don't have to go navigating around in the BUI for all the hundreds of shares the 7320 is hosting just to check if anything is running dry?" Easy! JavaScript time, VirtualBox and emacs! //NOTE! this script is available 'as is' It has ben run on a couple of 7320's, (running 2010.08.17.3.0,1-1.25 & // 2011.04.24.1.0,1-1.8) a 7420 and the VB image, but I personally //offer no guarantee whatsoever that it won't make your server topple, catch fire or in any way go pear shaped.. //run at your own risk or learn from my code and or mistakes.. script run('cd /'); run('shares'); //get all projects: proj = list(); function spaceToGig(bytes){ return bytes/1073741824; //convert bytes to GB } function fullInPercent(quota, space_data){ tmp = (space_data/quota)*100; return tmp; } //print header, slightly good looking printf(" %s/%-15s %8s(GB) %7s(GB) %5s(GB) %7s(GB) %3s\n","Project", "Share","Quota","Ref", "Snap", "Total","%full"); printf("-------------------------------------------------------------------------------\n") //for each project, get all shares. check for quota and calculate percentage and human readable figures.. for (i=0;i<proj.length;i++){ run('select ' + proj[i]); //get all shares for a project var pshares = list(); //for each share get quota properties for (j=0;j<pshares.length;j++){ run('select ' + pshares[j]); quota = get('quota'); //properties associated with a share or inherited from a project spaceData = get('space_data'); spaceSnap = get('space_snapshots'); spaceTotal = get('space_total'); if(quota>0){ //has quota printf(" %s/%-15s \t%4.2fGB\t%.2fGB\t%.2fGB\t%.2fGB\t%5.2f%%\n",proj[i], pshares[j],spaceToGig(quota),spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),fullInPercent(quota,spaceTotal)); }else{ //no quota printf(" %s/%-15s \t%8s\t%.2fGB\t%.2fGB\t%.2fGB\t%s\n",proj[i],pshares[j], "N/A", spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),"N/A"); } run('cd ..'); } run('done'); } The resulting output should look something like this: Project/Share Quota(GB) Ref(GB) Snap(GB) Total(GB) %full ------------------------------------------------------------------------------- ACSExalogicSystem/domains N/A 0.04GB 0.00GB 0.04GB N/A ACSExalogicSystem/logs N/A 0.01GB 0.00GB 0.01GB N/A ACSExalogicSystem/nodemgrs N/A 0.00GB 0.00GB 0.00GB N/A ACSExalogicSystem/stores N/A 0.04GB 0.00GB 0.04GB N/A ***_dev/FMW_***_1 133GB 4.24GB 0.01GB 4.25GB 3.19% ***_dev/FMW_***_2 N/A 4.25GB 0.01GB 4.26GB N/A ***_dev/applications 10GB 0.00GB 0.00GB 0.00GB 0.00% ***_dev/domains 50GB 10.75GB 3.55GB 14.30GB 28.61% ***_dev/logs 20GB 0.32GB 0.01GB 0.33GB 1.66% ***_dev/softwaredepot 20GB 4.15GB 0.00GB 4.15GB 20.73% ***_dev/stores 20GB 0.01GB 0.00GB 0.01GB 0.05% ###_dev/FMW_###_1 400GB 17.63GB 0.12GB 17.75GB 4.44% ###_dev/applications N/A 0.00GB 0.00GB 0.00GB N/A ###_dev/domains 120GB 14.21GB 5.53GB 19.74GB 16.45% ###_dev/logs 15GB 0.00GB 0.00GB 0.00GB 0.00% ###_dev/softwaredepot 250GB 73.55GB 0.02GB 73.57GB 29.43% …snip My apologies if the output is a bit mis-aligned here and there, I only bothered making it look good, not perfect :/ I also removed some of the project names (*,#)

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >