Search Results

Search found 17045 results on 682 pages for 'high cpu usage'.

Page 8/682 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

    - by Nicolas Raoul
    Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

    Read the article

  • checking the status of CPU throttling: whether ON or OFF

    - by Gaurish Telang
    I am trying to install the ATLAS BLAS library which recommends that I turn if CPU throttling to do the install. How do I check if my CPU throttling is ON or OFF? I tried the suggestion of Code: ./cpufreq-selector -g performance in the /usr/bin directory as suggested elsewhere in the forum but there was no output and the control returned back to the user. I have searched everywhere but there does not seem to be a way to determine the status of the CPU throttling

    Read the article

  • Clean thermal paste from touch contact points on the underside of the CPU

    - by Karolinger
    I bought an used CPU (Intel "Core 2" E4700) on eBay and it came with the underside dirty with something that seems it´s thermal paste. Before I send it back, I wonder if it could it still work without cleaning this dirt because the seller supposedly "tested" it to be fully working. Final, is there a way to clean this dirt without damaging the CPU? Or, is it too risky (or too much work) to do so? This is the CPU:

    Read the article

  • High Load - Low IO - Low CPU usage

    - by devup
    I have a system whose load is rather high. As you can see from the top output below, CPU usage and I/O is negligible: top - 17:31:59 up 4 days, 2:34, 2 users, load average: 1.00, 0.99, 1.00 Tasks: 71 total, 1 running, 70 sleeping, 0 stopped, 0 zombie Cpu(s): 2.0%us, 2.0%sy, 0.0%ni, 95.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 960720k total, 707288k used, 253432k free, 67328k buffers Swap: 2811896k total, 2644k used, 2809252k free, 528928k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15310 root 20 0 2512 1128 888 R 2.1 0.1 0:00.05 top I would appreciate any assistance with isolating the cause(s) of high load for when I/O and CPU are not factors.

    Read the article

  • Intel site says VT-x is supported on my CPU, but tests say otherwise

    - by Anshul
    I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

    Read the article

  • High CPU usage - symptoms moving from server to server after bouncing

    - by grt3kl
    First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

    Read the article

  • CPU operating temperature ranges

    - by osij2is
    I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

    Read the article

  • Error 5A - Internal CPU Error

    - by Mitch
    So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

    Read the article

  • CPU Usage at 100% with "Hardware Interrupts"

    - by eventualEntropy
    After turning on my desktop one day, I found that my CPU usage was maxed out at 100%, with 99% of that going to hardware "Interrupts". I tried to enable/disable all my devices one by one through the device manager, and found that I could get the CPU usage used by the Interrupts down to 50% by disabling all devices labelled "USB Host Controller" (except the ones for the mouse/keyboard). I found that I also got 10-20% more from disabling "High Definition Audio Controller". Following the tutorial at: http://www.msfn.org/board/topic/140263-how-to-get-the-cause-of-high-cpu-usage-by-dpc-interrupt/ Led me to similar conclusions (that is, that the culprit is mostly "USB Host Controller"): I've tried updating my asus motherboard driver and my video card driver. This is on Windows 7 64 bit. I've spent hours trying to figure this out and I'm running out of ideas short of formatting (which might still not fix it!).

    Read the article

  • How to monitor CPU usage and performance on a Hyper-V server with several VM's

    - by Bjørn
    Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 I have some troubles with the setup in that the host monitor remains responsive at all times, even though the VM's are seemingly working at 100% cpu and are very sluggish and unresponsive. (I have asked a separate question about that.) So the question here is: What is the best way to monitor how the physical CPU's are actually utilized? The reason I am asking is that I am being told that i cannot reliably use the task manager to monitor CPU usage in a VM.

    Read the article

  • CPU's on Hyper-V host system is just idling, even though VM's are at full throttle

    - by Bjørn
    Hello, I have a server that is running Windows 2008 64 bit Hyper-V, with 8 gigs of RAM and Intel Xeon X3440 @ 2.53 Ghz, which gives me 8 logical cores in the performance monitor on the host system. I have set up three Virtual Machines, all running Windows 2008 32 bit. Build server, running Team City Staging server SQL Server, running SQL Server 2005 These three machines are running very sluggishly, they are at 100% cpu even though the host system is barely using any cpu at all, typically below 10% total. Could anyone please give some tips as to the best setup for CPU allocating? Should I have set each server to have two cores, or should I increase this number above the total number of cores on the host? What is a good number to set on the Virtual Machine Reserve and Virtual Machine Limit? Is 8 gigs of physical RAM insufficient for 3 VM's? Thanks for reading. :)

    Read the article

  • What do you consider to be a high-level language and for what reason?

    - by Anto
    Traditionally, C was called a high-level language, but these days it is often referred to as a low-level language (it is high-level compared to Assembly, but it is very low-level compared to, for instance, Python, these days). Generally, everyone calls languages of the sort of Python and Java high-level languages nowadays. How would you judge whether a programming language really is a high-level language (or a low-level one)? Must you give direct instructions to the CPU while programming in a language to call it low-level (e.g. Assembly), or is C, which provides some abstraction from the hardware, a low-level language too? Has the meaning of "high-level" and "low-level" changed over the years?

    Read the article

  • /lib/udev/net.agent causing high CPU usage

    - by Antoine Benkemoun
    We have a number of Soekris boxes running Debian Squeeze. They were installed through an automated process consisting of using deboostrap and copying it unto a Compact Flash card. We use puppet to manage the configuration of all these boxes. Before Debian Squeeze, they were running Voyage Linux which is just a "lighter" version of Debian. Since we have switched, we're seeing the /lib/udev/net.agent process take up an aweful lot of CPU. We have so far been unable to find any clue as to what this really does and why it's taking up some much CPU time. In htop we see the following : We are seeing absolutly no syslog messages related to this process so we're a bit lost... So, I am looking for pointers as to what this process does in general and what could be the potential cause of such CPU usage.

    Read the article

  • Database Server Hardware components (order of importance), CPU speed VS CPU cache vs RAM vs DISK

    - by nulltorpedo
    I am new to database world and would like to know what are crucial hardware specs when it comes to database performance. I have searched the internet and found this so far (In order of decreasing importance): 1) Hard Disk: Get an SSD basically (much more IOPS than spinners) 2) Memory: Get as much as you can afford 3) CPU: For the same $ spent, prefer larger cache size over speed. Are these findings sensible? EDIT: I would like to focus on CPU speed VS CPU cache size. EDIT2: The database is used to store some combination of ints and int arrays with few text fields. There are a lot of Select queries looking for existing entries. If entry is not found, then insert it. I would say most of processing would be trying to find a match across a table with 200 columns and 20k rows. The insert statements are very few. EDIT3: Also, we have a lot of views (basically select queries).

    Read the article

  • Tomcat memory usage grows until crash with no GC run

    - by Phil
    I'm administrating a server running Tomcat that is getting a lot of traffic lately. If I monitor memory usage in Task Manager I can see the memory usage growing and eventually tomcat crashes around the 1GB mark. Here's the memory relevent bits I've set in Tomcat Properties (this is a Windows Server): Intial memory pool: 1024 MB Maximum memory pool: 1024 MB -XX:MaxPermSize=256M The weird thing is since these problems arose I've deployed Lambda Probe to the Tomcat instance and the memory usage values I see there are much lower, for example Task Manager might show 467MB used while the "Total" used in Probe is 212 MB. Also, the Maximum Total listed in Probe is 1.29GB, when I would have expected 1GB, the maximum memory set above. If I force the garbage collector to run using Probe, I can keep Tomcat from crashing for a while (indefinitely, AFAIK). So why doesn't the GC run automatically and stop Tomcat from crashing? Thanks.

    Read the article

  • Very fast Laptop Heating due to very high CPU usage by dwm.exe

    - by Sushan Shrestha
    My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

    Read the article

  • PHP Script causing high CPU

    - by user20996
    I have a website which is causing me a major headache. There is one PHP script which is using far to much CPU, this only seem to happen when bots hit the site, I dont want to block all the bots because we need them. I have the the process manager output: Pid Owner Priority CPU % Memory % Command 16943 (Trace) (Kill) specialone 0 99.4 1.0 /usr/bin/php /var/www/specialone/page.php I ran strace -p 16943 on the process but it comes up with nothing. We have 2GB of RAM and the php memory_limit is set to 128M which should be enough. The trouble I have is the PHP code is a Framework and the culprit page.php pulls in a lot of other PHP files so I cant debug the PHP. Is there any way of finding out what the script is doing when its using so much CPU which will help me solve it?

    Read the article

  • Virtual MS Sql Server not consuming enough CPU

    - by rocketman
    We have a Win2008 server 32 bit running as a virtual machine under ESX server. It has 6 CPU cores of 2Gz each and 4GB ram. It's running MS Sql Server 2008 R2 only. Problem: The server is heavily loaded and responds slowly. From windows taskmanagers point of view, it really looks overloaded, CPU wise. However, our external "cloud manager" says it's only using 2.5GHz worth of CPU-cycles in the cluster. I/O times looks "good". We have already tried to set the SQL servers number of working threads from 0(auto) to 256, to no effect. How to tune the VM host, guest or SQL to use all of it's alotted resources? Does it sound possible att all?

    Read the article

  • How to read unix usage

    - by sixtyfootersdude
    I did some searching but I cannot find documentation on how unix usage works. I know somethings (mostly through trial and error) but for example how do I know that: /usr/bin/ls [-aAbcCdeEfFghHilLmnopqrRstuvVx1@] [file]... Means that you can include more than one option. Ie: ls -la Can someone point me to some documentation on what the usage syntax is.

    Read the article

  • Reduce Mac OS X's Flash CPU usage

    - by elhombre
    I have been experiencing high CPU usage (138%) on my MacBook, while looking at flash videos on the internet with the Firefox browser. Mostly this usage makes itself noticeable by the loud noise of the fans and a hot MacBook which is very annoying for me. Does anyone know how to solve this problem or a workaround in of any kind?

    Read the article

  • Low CPU usage but High fan speed

    - by dhasu
    The problem I am facing is the CPU fan rotates with high speed even though the CPU usage is very low, less than 10%. I even cleaned the Dust off the Fan, I replaced the Thermal Material on the Processor. Installed an Extra Fan. Nothing seems to Work. Please Help.

    Read the article

  • How Byte loading/storing is implemented By the CPU?

    - by AlexDan
    I know that in 32bit machine, cpu read from memory 32bits at a time. since the registers in this case is 32bit in size too, I can understand how this works. What I don't understand is how the cpu implement load instructions of 1 byte. does it load the whole word where the single byte is located to the register, then perform some kind of "byte shifting", or does the cpu can load a single byte, in this case when does the byte masking happen, is it until the byte got loaded in the register, or it happen when byte is send through the data bus ? P.S. The cpu Im using is MIPS, the instructions Im talking about are: lb or lbu

    Read the article

  • how to check usage of a web site

    - by Raj More
    I have this community that wants me to join in. They claim to be a very active referral service community. I since referrals are private, I cannot gain access to the actual numbers. I wanted to review their site usage to see really how active they are. Where do I check up on their visitor usage?

    Read the article

  • Reason behind system power usage?

    - by user28565
    Hi, when the number of applications running in a pc increases, the power consumed by the PC is also increasing. Is this correct? I think the reason behind this is CPU. Please let me know what role the CPU plays for more power usage. Thanks, Kavi

    Read the article

  • CPU fan making noise. plz suggest

    - by user32185
    CPU fan is making noise ...i figured out reasons: Cable coming out of fan is vibrating ... And may be also CPU fan is loose causing vibration... suggest options... i cleaned the fan ...but found that there is no heatsink compound /paste between processor and the fan..is it ok . My processor is p4 2.4 ghz motherboard intel 845 gvsr

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >