Search Results

Search found 245 results on 10 pages for 'installers'.

Page 8/10 | < Previous Page | 4 5 6 7 8 9 10  | Next Page >

  • Why is writing to my external hard drive slow, while benchmarks show fast writing?

    - by matix2267
    I have an iOmega eGo 320GB portable drive connected through USB2.0 to my laptop running Windows Vista. It's been working fine for quite some time until recently it became very slow when writing e.g. when copying ~300MB movie over to the drive at first it is extremely fast but it actually doesn't write it only puts in cache and then hangs on last 10-20MBs for about a minute. When copying larger files it's the same story: starts fast but then slows down to ~5MB/s (sometimes even slower down to 2MB/s). Strange thing is that I have always had caching disabled for this drive (it was disabled by default and I never bothered changing it). At first I thought that the disk is dying so I checked S.M.A.R.T. values and everything is fine there. I also run chkdsk and it seemed to fix the problem - it worked fast for a few minutes but then it slowed down again. I also tried plugging it into another USB port - no difference. Additionally I noticed that reading under certain circumstances is sometimes slower e.g. loading times for some games are ~10 times longer, whereas simple copying files from this drive to my internal HDD is fast. I ran a speed benchmark using CrystalDiskMark with a 5x100MB run and strangely got these results: read write (MB/s) Seq 33.05 28.25 512k 17.30 15.27 4k 0.267 0.372 4kQD32 0.510 0.260 This is different from what most other people have (I've found many threads about slow disk write while googling but all of them were slow on benchmarks too) which is why I decided to post this problem here. BTW most of the time when writing (or sometimes reading) the activity led is mostly idle (blinks a while and then stops for longer, sometimes has slower blinks ~1 sek, sometimes goes off for a few seconds - extremely long blink :) ) but when benchmarking, defragmenting or just reading (copying from this drive, installing apps from installers there, watching HD videos) it is blinking really fast (like it should) and there are no slowdowns. It shouldn't be driver issue unless stock Windows drivers have some issues I'm not aware of.

    Read the article

  • How do I fix error 1303 during TI Connect install?

    - by smoth190
    I recently purchased a TI-84 Plus graphing calculator, and I'm trying install the TI Connect software in order to connect the calculator to my computer via the USB cable. Unfortunately, I'm getting this error while trying to install the program: Error 1303. The installation has insufficient privileges to access this directory: E:\Data\Timothy\Documents\MyTIData. The installation cannot continue. Log on as administrator or contact your system administrator. However, my account is the only account on my PC, and it has administrative privileges. I've also tried running the installer with Run as Administrator, but with no luck. If I create the folder MyTIData manually, I receive this error: Error 1317. An error occurred while attempting to create the directory: E:\Data\Timothy\Documents\MyTIData I've reapplied the security settings to the E:\Data folder (and all its sub-directories) to Full for my account. I've also gone into Computer Management, and given SYSTEM full privileges for the entire disk. I've also logged out, logged back in, restarted, etc. but still, no luck. Now, I should mention that my Documents folder is not at the default location. I changed it due to my C: disk being a 90GB SSD, so I moved all my personal data onto the extra storage disk (which is ~1TB). I don't know if that is causing the issue, but it can't hurt throwing it out there. So why can't I install this program? Google'ing the problem brings up this error for various other installers (such as Visual Studio and Microsoft Office), but nothing for TI Connect. All the solutions are the same: Give the folder Full privileges...but I've already done this! I've also tried running the installer with and without the calculator plugged in, but it didn't change anything. In the prompt that contains the error, repeatedly clicking Retry or waiting a few moments before clicking Retry also produces no result.

    Read the article

  • How can one use online backup with large amounts of static data?

    - by Billy ONeal
    I'd like to setup an offsite backup solution for about 500GB of data that's currently stored between my various machines. I don't care about data retention rates, as this is only a backup of, not primary storage, for my data. If the backup is stored on crappy non-redundant systems, that does not matter. The data set is almost entirely static, and mostly consists of things like installers for Visual Studio, and installer disk images for all of my games. I have found two services which meet most of this: Mozy Carbonite However, both services impose low bandwidth caps, on the order of 50kb/s, which prevent me from backing up a dataset of this size effectively (somewhere on the order of 6 weeks), despite the fact that I get multiple MB/s upload speeds everywhere else from this location. Carbonite has the additional problem that it tries to ignore pretty much every file in my backup set by default, because the files are mostly iso files and vmdk files, which aren't backed up by default. There are other services such as EC2 which don't have such bandwidth caps, but such services are typically stored in highly redundant servers, and therefore cost on the order of 10 cents/gb/month, which is insanely expensive for storage of this kind of data set. (At $50/month I could build my own NAS to hold the data which would pay for itself after ~2-3 months) (To be fair, they're offering quite a bit more service than I'm looking for at that price, such as offering public HTTP access to the data) Does anything exist meeting those requirements or am I basically hosed?

    Read the article

  • Why can't I mount an image hosted on a read-only HFS+ partition via Boot Camp?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

  • Why do disk images hosted on a read-only HFS+ partition behave differently?

    - by deceze
    I have come across the following phenomenon and would like to know how leaky Windows' file system abstraction is or if there's something else involved. I partitioned the hard disk of my MacBook Pro and installed Windows 7 (64 bit). The Boot Camp driver package includes file system drivers that enable Windows to access the Mac OS HFS+ partition. It's read-only access, but it works. Now, I have some disk images of stuff I usually install, so I grabbed a copy of Daemon Tools to mount them. When I mount an image saved on the HFS+ partition, about two out of three installers on these disks (usually InstallShield) crash with all sorts of weird errors. Most are just gibberish that lead to all sorts of non-solutions on Google, one was "This application is not the right type for your computer, check if you need 32 or 64 bit versions." When moving the image files to another Windows 7 computer on the network and mounting them from the network share, they work fine. My question now is, why do applications behave differently depending on whether the read-only image file, which should be abstracted away through the read-only virtual Daemon Tools drive, is located on a read-only HFS+ partition or on a Windows network share? And I'll just roll this into the question as well since I was wondering: Does the file system of a network share matter? Does the client system need to understand the file system of the share host or is that abstracted away in SMB?

    Read the article

  • Why is there no /usr/bin/ in windows? Would it be dangerous to the entire Program Files to the path?

    - by dotancohen
    I am a Linux user spending some time in Windows and I'm trying to understand some of the Windows paradigms instead of fighting them. I notice that each program installed in the traditional manner (i.e. via orgasmic installers: Yes, Yes, Yes, Finish) adds the executables to C:/Program Files/foo/bar.exe and then adds a shortcut to the Desktop / Start Menu containing the entire path. However, there is no common directory with links to the software, i.e. C:/bin/bar.exe which would link to C:/Program Files/foo/bar.exe. Therefore, after installing an application the only way to use the application is via the clicky-clicky menus or by navigating to the executable in the filesystem. One cannot simply Win-R to open the run dialogue and then type bar or bar.exe as is possible with notepad or mspaint. I realize that Windows 8 improves on this with the otherwise horrendous Start Screen which does support typing the name of the app, but again this depends on the app having registered itself for such. Would I be doing any harm by adding C:/Program Files recursively to the Windows path? I do realize that there will be name collisions (i.e. uninstall.exe) but could there be other issues?

    Read the article

  • Is there an Installer Analyser tool that can list what Registry Keys will be created?

    - by EvoGamer
    I can think of 3 ways to achieve my goal: Create a clean VPC, install a given piece of software, and compare the before and after states. Somehow reverse-engineer the installer. Somehow redirect the output of the installer in question so that all registry calls and copy/move file commands are recorded, but not executed. The first option can be done manually, or potentially automated, but I feel it's rather OTT for my needs. The second could cause all sorts of licencing issues, not to mention it may not always return a correct result. Also, without delving into hex editing, I can't think of a way that it would be possible to do manually (some installers - eg Anti-Virus software - may react unfavourably on automated attempts to investigate the installer). The third option shows the most promise, although if the first could be stripped down into a lightweight throwaway environment, it would work pretty much the same way. However, I'm not sure how to do it. So my question is: What tools are available (if any) and/or how could I find out this information manually? I'm not looking to reverse-engineer anything (if I can help it), but I just want to know exactly what changes are being made to my PC by a given piece of software.

    Read the article

  • Windows 7 delayed file delete

    - by GregoryM
    I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate.

    Read the article

  • Windows 7 delayed file delete

    - by GregoryM
    I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate. UPD: maybe some shadow copying or system restore services (though I have the system restore turned off) block the files? Can't even guess...

    Read the article

  • Install Quartz.Net as a windows service and Test installation

    - by Tarun Arora
    In this blog post I’ll be covering, 01: Where to download Quartz.net from 02: How to install Quartz.net as a Windows service 03: Test the Quartz.net Installation If you are new to Quartz.net I would recommend reading the blog post on a brief introduction to Quartz.net. 01 – Where to download Quartz.net? http://sourceforge.net/projects/quartznet/files/quartznet/       Currently version  Quartz.Net 2.0.1 is the recommended download version. 02 – How to install Quartz.net as a Windows service         Go to the download location and unzip the Quartz.net package Navigate to the folder Quartz.Net \ Server \ bin – This is where you will find different .net version installers of the quartz.net packages. For example in the screen shot above, you can see the Quartz.net .net 3.5 and .net 4 packages. Open up the Quartz.net .net 4.0 folder, this folder contains the files you need to install Quartz.net as a windows service Copy the contents of the folder Downloads\Quartz.NET-2.0.1\server\bin\4.0 to the folder %program files%\Quartz.net   5. Open up a new CMD as an administrator and run the below command to install Quartz.net as a windows service /> Quartz.Server.exe install 6. How do I know that Quartz.Net service has installed as a Windows service? Go to run prompt and type ‘services.msc’ you should now see all the windows services installed on your machine. Navigate down to look for Quartz.Net. The service installs itself as an automatic startup Type and log on as ‘Local System’. You can easily change this to your prefer account that you would like to run the service as. If you wanted to name the Quartz service something else then that’s also possible… Can I change the default display name of the quartz.net windows service? Yes, you can! Navigate to C:\Program Files (x86)\Quartz.Net\ and open up the config file ‘quartz.config’ - You can change the instance name - You can change the default thread count of 10 - The port that the service listens to (by default this is port 555) A blog post on more configuration details can be found here. 03 – Test Quartz.Net windows service installation So, I have installed Quartz.Net as a windows service, how do I test whether my installation has been successful. Open up cmd as an administrator and run the below command, C:\Program Files (x86)\Quartz.Net> Quartz.Server.exe –i Since by default the Quartz.net windows service writes INFO level diagnostics (this can be changed from Quartz.Server.exe.config) you should see the service information show up on the console. For instance in the example above I can see that the service is running in a NON CLUSTERED mode, its currently not started and is currently in standby mode with 0 number of jobs executed so far… This was second in the series of posts on enterprise scheduling using Quartz.net, in the next post I’ll be covering how to run your first scheduled task using Quartz.net windows service. Thank you for taking the time out and reading this blog post. If you enjoyed the post, remember to subscribe to http://feeds.feedburner.com/TarunArora. Stay tuned!

    Read the article

  • Implementing Release Notes in TFS Team Build 2010

    - by Jakob Ehn
    In TFS Team Build (all versions), each build is associated with changesets and work items. To determine which changesets that should be associated with the current build, Team Build finds the label of the “Last Good Build” an then aggregates all changesets up unitl the label for the current build. Basically this means that if your build is failing, every changeset that is checked in will be accumulated in this list until the build is successful. All well, but there uis a dimension missing here, regarding to releases. Often you can run several release builds until you actually deploy the result of the build to a test or production system. When you do this, wouldn’t it be nice to be able to send the customer a nice release note that contain all work items and changeset since the previously deployed version? At our company, we have developed a Release Repository, which basically is a siple web site with a SQL database as storage. Every time we run a Release Build, the resulting installers, zip-files, sql scripts etc, gets pushed into the release repositor together with the relevant build information. This information contains things such as start time, who triggered the build etc. Also, it contains the associated changesets and work items. When deploying the MSI’s for a new version, we mark the build as Deployed in the release repository. The depoyed status is stored in the release repository database, but it could also have been implemented by setting the Build Quality for that build to Deployed. When generating the release notes, the web site simple runs through each release build back to the previous build that was marked as Deplyed, and aggregates the work items and changesets: Here is a sample screenshot on how this looks for a sample build/application The web site is available both for us and also for the customers and testers, which means that they can easily get the latest version of a particular application and at the same time see what changes are included in this version. There is a lot going on in the Release Build Process that drives this in our TFS 2010 server, but in this post I will show how you can access and read the changeset and work item information in a custom activity. Since Team Build associates changesets and work items for each build, this information is (partially) available inside the build process template. The Associate Changesets and Work Items for non-Shelveset Builds activity (located inside the Try  Compile, Test, and Associate Changesets and Work Items activity) defines and populates a variable called associatedWorkItems   You can see that this variable is an IList containing instances of the Changeset class (from the Microsoft.TeamFoundation.VersionControl.Client namespace). Now, if you want to access this variable later on in the build process template, you need to declare a new variable in the corresponding scope and the assign the value to this variable. In this sample, I declared a variable called assocChangesets in the RunAgent sequence, which basically covers the whol compile, test and drop part of the build process:   Now, you need to assign the value from the AssociatedChangesets to this variable. This is done using the Assign workflow activity:   Now you can add a custom activity any where inside the RunAgent sequence and use this variable. NB: Of course your activity must place somewhere after the variable has been poplated. To finish off, here is code snippet that shows how you can read the changeset and work item information from the variable.   First you add an InArgumet on your activity where you can pass i the variable that we defined. [RequiredArgument] public InArgument<IList<Changeset>> AssociatedChangesets { get; set; } Then you can traverse all the changesets in the list, and for each changeset use the WorkItems property to get the work items that were associated in that changeset: foreach (Changeset ch in associatedChangesets) { // Add change theChangesets.Add( new AssociatedChangeset(ch.ChangesetId, ch.ArtifactUri, ch.Committer, ch.Comment, ch.ChangesetId)); foreach (var wi in ch.WorkItems) { theWorkItems.Add( new AssociatedWorkItem(wi["System.AssignedTo"].ToString(), wi.Id, wi["System.State"].ToString(), wi.Title, wi.Type.Name, wi.Id, wi.Uri)); } } NB: AssociatedChangeset and AssociatedWorkItem are custom classes that we use internally for storing this information that is eventually pushed to the release repository.

    Read the article

  • EPM 11.1.2.2.000 - released

    - by THE
    Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle’s EPM System Development Team is pleased to announce General Availability of Oracle Hyperion Enterprise Performance Management System release 11.1.2.2.  This release is available on the Oracle Software Delivery Cloud (  https://edelivery.oracle.com).  This is a localized release available in multiple languages. See "System Requirements and Supported Platforms for Oracle Enterprise Performance Management System 11.1.2.2" ( http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html)  for details.  In this release, EPM System products extend the new features and products offered with release 11.1.2.1. Please visit the product "New Features Guides" ( http://docs.oracle.com/cd/E17236_01/index.htm), available in the Enterprise Performance Management System Documentation Library for more information. Note: Oracle Hyperion Calculation Manager has replaced Oracle Hyperion Business Rules as the mechanism for designing and managing business rules, therefore, Business Rules is no longer released with EPM System Release 11.1.2.2. If you are applying 11.1.2.2 as a maintenance release, or upgrading to Release 11.1.2.2, and have been using Business Rules in an earlier release, you must migrate to Calculation Manager rules in Release 11.1.2.2. See Oracle Enterprise Performance Management System Installation and Configuration Guide. The EPM System Media pack on Oracle Software Delivery Cloud has been simplified.  Software downloads have been merged together. See the Media Pack Readme for a list of downloads needed for your domain/product. IBM WebSphere 7.0.0.19+ (AS, ND) is now supported as an application server.  Documentation about deploying to WebSphere is in the chapter titled “Deploying EPM System Products to WebSphere Application Server” in the Oracle Enterprise Performance Management System Installation and Configuration Guide. FireFox 10.x+ and Internet Explorer 9 are now supported Web browsers. Microsoft Office 2010 64 bit is now supported. Microsoft Windows Installer (MSI) Client Installers are now provided for Oracle Essbase Client, Oracle Essbase Administration Services Console, Oracle Essbase Studio Console, and Oracle Hyperion Financial Management Client. Online Help content for EPM System products is served from a central Oracle download location, which reduces the download and installation time for EPM System. You can also install and configure online Help to run locally. For more information, see the Oracle Enterprise Performance Management System Installation and Configuration Guide.  For more information on , please see the “Oracle Enterprise Performance Management System, Release 11.1.2.2.000 Readme ( http://docs.oracle.com/cd/E17236_01/epm.1112/epm_1112200_readme.pdf).

    Read the article

  • questions about dual-boot install Ubuntu 10.04 and Windows 7 on same hard drive

    - by Tim
    I'd like to dual-boot install Ubuntu 10.04 on the same hard drive as Windows 7 which has already been installed. As to sources on the internet: I found a website iinet about dual-boot installation of Ubuntu 10.10 and Windows 7 on the same hard drive, which I think more specific than the one on Ubuntu Community without specific version of the OSes. Since I am installing Ubuntu 10.04 instead of 10.10, my question is whether their installers are same or almost same and if I can follow iinet for my dual-boot installation? Or are there better websites for information about dual-boot installtion of Ubuntu 10.04 and Windows 7? As to shrinking Windows partitions to make free space for Ubuntu partitions: iinet uses the partition software in Ubuntu's installer to shrink the Windows partition. But I saw in many website that the partition software in Ubuntu's installer cannot guarantee shrinking Windows 7 partitions successfully, so they recommended in general to shrink Windows partitions under Windows itself using its softwares. For example, in Ubuntu Community, it says: Some people think that the Windows partition must be resized only from within Windows Vista and Windows 7 using the shrink/resize option. ... If you use GParted Partition Editor in the Ubuntu Live CD be careful. So I was wondering which way to go in my situation? As to partition for bootloader files: In iinet, I don't see there is a partition created and dedicated to boot files (i.e. Grub files). However, I saw in many websites strongly suggesting using a boot partition for Grub files, especially for the purpose of separation and protection from installed OS files. I was wondering which way I should choose and why? As to installing bootloader Grub, in iinet, I see that to install Grub it only needs to specify the hard drive device for bootloader installation. However, in ubuntuguide(for more than 2 OSes and Ubuntu 9.04), some commands are needed to run in order to put Grub configuration files in MBR, and OS partition, for the chain-load process (where to find the files for the next stage). In Ubuntu Community, there are some related sentences which I don't quite understand how to do in practice: the only thing in your computer outside of Ubuntu that needs to be changed is a small code in the MBR (Master Boot Record) of the first hard disk. The MBR code is changed to point to the boot loader in Ubuntu. If you have a problem with changing the MBR code, you might prefer to just install the code for pointing to GRUB to the first sector of your Ubuntu partition instead. If you do that during the Ubuntu installation process, then Ubuntu won't boot until you configure some other boot manager to point to Ubuntu's boot sector. Windows Vista no longer utilizes boot.ini, ntdetect.com, and ntldr when booting. Instead, Vista stores all data for its new boot manager in a boot folder. Windows Vista ships with an command line utility called bcdedit.exe, which requires administrator credentials to use. You may want to read http://go.microsoft.com/fwlink/?LinkId=112156 about it. Using a command line utility always has its learning curve, so a more productive and better job can be done with a free utility called EasyBCD, developed and mastered in during the times of Vista Beta already. EasyBCD is user friendly and many Vista users highly recommend EasyBCD. In what is quoted above, I was wondering how exactly I should change the MBR code to point to the bootloader in Ubuntu? if I fail to change MBR code, are the other suggested boot managers being bcdedit.exe and EasyBCD in Windows? With the three sources above, which one shall I follow? Thanks and regards

    Read the article

  • Review: Windows 8 - Initial Experience

    - by Tim Murphy
    I originally started this post when I had the Windows 8 preview setup on VirtualBox image.  I have since put the RTM bits on a Dell E6530 that is my new work laptop.  It isn’t a table so I am not getting the touch experience, but as a developer this makes the most sense for the moment. This is the first Windows OS that I have had to spend much time exploring to even get started.  The first thing I ran into was when I clicked on the desktop icon I was lost.  Where is the Start menu? Where are my programs?  How do I get back to the Metro environment?  I finally tried hitting the Windows button and it popped back out to the Metro screen. Once I got past that I found that the look of the Metro interface is clean and well organized.  It should be familiar to anyone who is already using a Zune or Windows Phone 7.  In the Desktop, aside from the lack of the Start button to bring up programs the desktop is just like the Windows 7 environment we are all used to.  I do have to say though that I don’t like popping out to the Metro screen to find program.  I think installers for programs like ones that developers usually work in for a desktop mode will need to give an option for creating a desktop icon and pinning to the task bar of the desktop. One of the things I do really enjoy is having live tiles in the Metro environment.  It is a nice way of feeding my need for constant information.  The one drawback though is that the task bar at the bottom of my screen used to be where I got this information without leaving what I was working on.  It allowed me to see current temperatures and when there were messages waiting.  I have since found that these still work as expected in the Desktop and Toast message keep you up on what is going on in the Metro apps. Thankfully familiar functionality like Alt-Tab and Windows-Tab still work regardless of if apps are in the Metro or the Desktop environment.  Add to this the ability to find any application on the Metro screen by simply typing and things get very comfortable. I also started exploring some of the apps.  If you want see a ton of stats on your team at a glance check out the Sports app.  What games are coming up? Who are the leaders in a number of stats?  The Weather and Finance apps have good features as well and I am sure they will improve as users supply feedback. I have had to install Visual Studio 2010 side-by-side with VS2012 because the Windows Phone 7 SDK would only install on VS2010.  This isn’t a Windows 8 issue per se, but something that you need to be aware of if you are a developer moving to the new ecosystem. The overall experience is a joy despite a few hiccups.  For anyone moving to Windows 8 in on a non-touch laptop or desktop I do suggest this list of keyboard shortcuts.  Enjoy. del.icio.us Tags: Windows 8,Win8,Metro,Review

    Read the article

  • WiX: Prevent 32-bit installer from running on 64-bit Windows

    - by Tom the Junglist
    Hi everyone, Due to user confusion, our app requires separate installers for 32-bit and 64-bit versions of Windows. While the 32-bit installer runs fine on win64, it has the potential to create support headaches and we would like to prevent this from happening. I want to prevent the 32-bit MSI installer from running on 64-bit Windows machines. To that end I have the following condition: <Condition Message="You are attempting to run the 32-bit installer on a 64-bit version of Windows."> <![CDATA[Msix64 AND (NOT Win64)]]> </Condition> With the Win64 defined like this: <?if $(var.Platform) = "x64"?> <?define PlatformString = "64-bit"?> <?define Win64 ?> <?else?> <?define PlatformString = "32-bit"?> <?endif?> Thing is, I can't get this check to work right. Either it fires all the time, or none of the time. The goal is to check presence of the run-time msix64 variable against the compile-time Win64 variable and throw an error if these don't line up, but the logic is not working how I intend it to. Has anyone come up with a better solution? Thanks! Tom

    Read the article

  • Getting MSDeploy working on our build/integration server - Is an MSBuild upgrade necessary?

    - by Jeff D
    We have what I think is a fairly standard build process: 1. Developer: Check in code 2. Build: Polls repo, sees change, and kicks off build that: 3. Build: Updates from repo, Builds w/ MSBuild, Runs unit tests w/ nunit, 4. Build: creates installer package Our security team allows us to pull from the build server, but does not allow the build server to push. So we generally rdp in, d/l the installers, and run them, which rules out the slick deployment services, so I would need to generate packages instead. I'd like to use MSDeploy, except that we have the following issues: We're on .net 3.5, and the MSBuild target (Package) that uses MSDeploy requires 4.0. Is there anything I'd need to install other than .net 4.0 RC for this? (Would MSBuild be part of that upgrade?) When I generate packages with MSDeploy, I see that I don't have just 1 file. There's a zip, deploy.cmd, SourceManifest.xml, and SetParameters.xml. What are all the other files for, and why wouldn't they all be in the 'package'? It sounds as if you can create packages by telling the system to look at a working IIS site. But if the packages are build from a CI environment, aren't you basically out of luck here? It feels like they designed some of this for small-scale developers deploying from their dev environment. That's a fine use case, but I'm interested in see what everyone's enterprise-experience is with the tool Any suggestions?

    Read the article

  • How to suppress quotes in Powershell commands to executables

    - by David Gladfelter
    Is there any way to supress the enclosing quotation marks around each command-line argument that powershell likes to generate and then pass to external executables for command line arguments that have spaces in them? Here's the situation: One way to unpack many installers is a command of the form: msiexec /a <packagename> /qn TARGETDIR="<path to folder with spaces>" Trying to execute this from powershell has proven quite difficult. Powershell likes to enclose parameters with spaces in double-quotes. The following lines: msiexec /a somepackage.msi /qn 'TARGETDIR="c:\some path"' msiexec /a somepackage.msi /qn $('TARGETDIR="c:\some path"') $td = '"c:\some path"' msiexec /a somepackage.msi /qn TARGETDIR=$td All result in the following command line (as reported by the Win32 GetCommandLine() api): "msiexec" /a somepackage.msi /qn "TARGETDIR="c:\some path"" This command line: msiexec /a somepackage.msi TARGETDIR="c:\some path" /qn results in "msiexec" /a fooinstaller.msi "TARGETDIR=c:\some path" /qn It seems that Powershell likes to enclose the results of expressions meant to represent one argument in quotation marks when passing them to external executables. This works fine for most executables. However, MsiExec is very specific about the quoting rules it wants and won't accept any of the command lines Powershell generates for paths have have spaces in them. Is there any way to suppress this behavior?

    Read the article

  • How to deploy a number of disparate project types?

    - by niteice
    This question is similar to http://stackoverflow.com/questions/1900269/whats-the-best-way-to-deploy-an-executable-process-on-a-web-server. The situation is this: I'm developing a product that needs to be deployed to a web server. It consists of 4 website projects, a background service, a couple of command-line tools, and two assemblies shared by all of these components. Now, I also happen to administer the server that this product will be deployed on. So I'm familiar with everything that may need to be done to perform an update: Copy website files Replace the service binary Install updated components in the GAC Configure IIS Update database schema After some research it seems that, to reduce deployment time and to be able to let the other sysadmins handle deployment, I want to deploy all of these as an MSI, except that I don't know a thing about installers. I know VS can generate web deployment projects, but where do I go from there? Being able to simply click Next a few times on an installer is my goal for deploying updates. It would also be nice to modularize it, so for example, I could distribute the four websites among multiple servers and have everything appear as individual components in the installer, and as one entity in Add/Remove Programs. Is all of this too much to ask in a single package?

    Read the article

  • SharpDevelop WIX project: MSBuild Configurations

    - by chezy525
    Using SharpDevelop, I wrote a windows service with a WIX setup project to install/auto-start it. For testing purposes, I've done a number of things I don't want to do in the release version (i.e. add an uninstall shortcut to the desktop). So, my question really boils down to this; how do you handle build configurations within a WiX project? I think I've solved most of my problems after I found this question Passing build parameters to .wxs file to dynamicaly build wix installers. And thus far I've done the following: Added a property that checks the Configuration variable <Product> ... <Property Id="DEBUG">$(var.Configuration) == 'Debug'</Property> ... Separated all of the debug files into unique components and setup as a separate feature with a condition checking the DEBUG property. <Product> ... <Feature> ... <Feature Id="DebugFiles" Level="1"> <ComponentRef Id="UninstallShortcutComponent" /> <Condition Level="0">DEBUG</Condition> </Feature> ... Then, finally, pointing to the correct file based on the configuration, using the Configuration variable <Directory> ... <Component> <File Source="..\mainProject\bin\$(var.Configuration)\main.exe" /> </Component> ... So, now my question is simplified to how to handle files that may not exist under certain build configurations (like .pdb files). Using all of the above (including pointing the file source to the ...\bin\Release\*.pdb, which I know isn't expected to exist) I get a LGHT0103 compiler error, it can't find the file.

    Read the article

  • Script to install and compile Python, Django, Virtualenv, Mercurial, Git, LessCSS, etc... on Dreamho

    - by tmslnz
    The Story After cleaning up my Dreamhost shared server's home folder from all the cruft accumulated over time, I decided to start afresh and compile/reinstall Python. All tutorials and snippets I found seemed overly simplistic, assuming (or ignoring) a bunch of dependencies needed by Python to compile all modules correctly. So, starting from http://andrew.io/weblog/2010/02/installing-python-2-6-virtualenv-and-virtualenvwrapper-on-dreamhost/ (so far the best guide I found), I decided to write a set-and-forget Bash script to automate this painful process, including along the way a bunch of other things I am planning to use. The Script I am hosting the script on http://bitbucket.org/tmslnz/python-dreamhost-batch/src/ The TODOs So far it runs fine, and does all it needs to do in about 900 seconds, giving me at the end of the process a fully functional Python / Mercurial / etc... setup without even needing to log out and back in. I though this might be of use for others too, but there are a few things that I think it's missing and I am not quite sure how to go for it, what's the best way to do it, or if this just doesn't make any sense at all. Check for errors and break Check for minor version bumps of the packages and give warnings Check for known dependencies Use arguments to install only some of the packages instead of commenting out lines Organise the code in a manner that's easy to update Optionally make the installers and compiling silent, with error logging to file failproof .bashrc modification to prevent breaking ssh logins and having to log back via FTP to fix it EDIT: The implied question is: can anyone, more bashful than me, offer general advice on the worthiness of the above points or highlight any problems they see with this approach? (see my answer to Ry4an's comment below) The Gist I am no UNIX or Bash or compiler expert, and this has been built iteratively, by trial and error. It is somehow going towards apt-get (well, 1% of it...), but since Dreamhost and others obviously cannot give root access on shared servers, this looks to me like a potentially very useful workaround; particularly so with some community work involved.

    Read the article

  • What files does JDIC need to run?

    - by Domchi
    I'm trying to call JDIC from my application, but I can't get it to run. What files do I need and where? From what I've been able to gather from their site, I basically need to put jdic.jar in classpath... however there is also a lib folder with jdic.jar with a bit different size, and jdic_native_applet.jar, jdic_stub_unix.jar, jdic_stub_windows.jar and several folders with what I gather are platform specific files. I get this exception when instantiating AssociationService: java.lang.ClassNotFoundException: org.jdesktop.jdic.filetypes.internal.AppAssociationReaderFactory_windows at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:307) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301) at java.lang.ClassLoader.loadClass(ClassLoader.java:252) at org.jdesktop.jdic.filetypes.AssociationService.<init>(Unknown Source) at QuickTest.main(QuickTest.java:101) I've tried last "official" release and last alpha release. I'm running Java 6 and Win7 64bit. Does JDIC even work under Win7 (or 64bit, although I use 32bit Java)? I see no release after 2006, and no activity in the project after about 2008... while Win7 came in 2009. I know that parts of JDIC, like Desktop, were included in Java 6, however that doesn't seem to be the case with file associations. And if it doesn't, are there any (hopefully cross-platform) alternatives for managing file associations? There are some things for Windows only that I tried, but that requires running native commands with administrator privileges which I don't know how to pull, apart from asking user to run my app as administrator and then use Runtime.exec()... If there are no alternatives to JDIC, I'm interested if anyone has managed to handle file associations well with cross-platform installers?

    Read the article

  • Error 1606. Could not access network location %SystemDrive%\inetpub\wwwroot\ while installing on IIS

    - by Mark
    I'm trying to port our software installer which currently supports Windows 2000 and Windows 2003 to a Windows 2008 environment. Currently, the installer gets an error which reads "Error 1606. Could not access network location %SystemDrive%\inetpub\wwwroot." %SystemDrive% is without a doubt C:\, and C:\inetpub\wwwroot\ has the correct accessibility. It is interesting that if I hardcode the path in the following keys in the registry to C:\inetpub\wwwroot\, without using the environment variable, the installer works correctly. • HKLM/Software/Wow6432Node/Microsoft/InetStp/PathWWWRoot • KHLM/Software/Microsoft/InetStp/PathWWWRoot. This seems like a very poor hack. I do not want to tell our clients that they need to hack their registry before they will be able to install our product. Another option is to change the registry behind the scenes, do our install, and revert the registry keys to their original values at the end of the install, but obviously I don't like this solution either. I find it hard to believe that Microsoft would have done this without reason, so there must be an alternate approach to get these installers to work without modifying the registry. Any tips appreciated.

    Read the article

  • Does VMware_ThinApp_4.0.3_169725.msi contain Trojan.Win32.Vapsup in it? [closed]

    - by Joe
    Today I ran a full system scan using Online Armor++. It detected Trojans in the installer. I have had this installer on the computer for many months and I do not remember if I ever installed it on this PC or not. For some reason I unpacked the installer with 7zip though. I was probably going to attempt to make it portable. Anyway so I had the installer in a folder, and another folder next to it with all of the installers files unpacked. The VMwareVS.cab file that was extracted from the installer, also had its files extracted into another folder. This was all done many months ago. OA++ did not detect the installer itself as as Trojan VMwareVS.cab, but it did detect 4 of the files that I had unpacked as Trojans. Here are the details of what the scan detected on my PC today. Note: I uploaded these files to VirusTotal....the Ikarus and A-squared engines(the engines from Online Armor++) are not detecting anything. But some of the other engines are detecting the same Trojan that OA++ detected(Trojan.Win32.Vapsup). C:\Downloads\VMware_ThinApp_4.0.3_169725.msi [This file was not detected by the Virus Scan as infected] CRC-32: 50189335 MD5: 9e32e3272d2637fb6e0759a604879e6f SHA-1: 19ef5a6d586ddcc5b9222ba57b0f14159655f3f8 C:\Downloads\VMware_ThinApp_4.0.3_169725\VMwareVS.cab [This file was not detected by the Virus Scan as infected] CRC-32: d3a9694a MD5: ddc278a8fe0a25486277d9800e6af85a SHA-1: 456b731c8b6fdb7a1d7bcff3d1fbe9df58ccc73a Online Armor++ Virus Scan Results: Detected Trojan.Win32.Vapsup.vee!A2 C:\Downloads\VMware_ThinApp_4.0.3_169725\Binary.ThinstallProcess CRC-32: 4888b13c MD5: 4884cb4622278c0835b9a5dcd2ae0473 SHA-1: ed879ae65147805dd69e1355c17df814b9d434ce Detected Trojan.Win32.Vapsup.vef!A2 C:\Downloads\VMware_ThinApp_4.0.3_169725\VMwareVS\AppSync.exe CRC-32: fd20b378 MD5: cbdcdd590f7ffc52b6ce68fa11f2bda4 SHA-1: aebf685e02d6693df9eaa92c67dc5746792b5ecf Detected Trojan.Win32.Vapsup.veg!A2 C:\Downloads\VMware_ThinApp_4.0.3_169725\VMwareVS\logging.dll CRC-32: 8adee5d5 MD5: 56ff9b83f58ba8eacb6e939aa4759bf0 SHA-1: b52fa38765a25fe6a2c4f60d76545a4dd64904eb Detected Trojan.Win32.Vapsup.vek!A2 C:\Downloads\VMware_ThinApp_4.0.3_169725\VMwareVS\thinreg.exe CRC-32: 423c5652 MD5: c436feff8d9096e7475c84a6bca6096c SHA-1: 685b84af796132ce144aacd6ff23379e17ddf1a7 Are these files indeed infected by this Trojan, or is it just a false positive? Does anybody have the same version of the original installer, who could find out if the Checksums of the installer and unpacked files match? Should I be worried about whether this Trojan has spread and infected my machine? Thanks in advance for any help!

    Read the article

  • .NET 3.5 Installation Problems in Windows 8

    - by Rick Strahl
    Windows 8 installs with .NET 4.5. A default installation of Windows 8 doesn't seem to include .NET 3.0 or 3.5, although .NET 2.0 does seem to be available by default (presumably because Windows has app dependencies on that). I ran into some pretty nasty compatibility issues regarding .NET 3.5 which I'll describe in this post. I'll preface this by saying that depending on how you install Windows 8 you may not run into these issues. In fact, it's probably a special case, but one that might be common with developer folks reading my blog. Specifically it's the install order that screwed things up for me -  installing Visual Studio before explicitly installing .NET 3.5 from Windows Features - in particular. If you install Visual Studio 2010 I highly recommend you install .NET 3.5 from Windows features BEFORE you install Visual Studio 2010 and save yourself the trouble I went through. So when I installed Windows 8, and then looked at the Windows Features to install after the fact in the Windows Feature dialog, I thought - .NET 3.5 - who needs it. I'd be happy to not have to install .NET 3.5, but unfortunately I found out quite a while after initial installation that one of my applications/tools (DevExpress's awesome CodeRush) depends on it and won't install without it. Enabling .NET 3.5 in Windows 8 If you want to run .NET 3.5 on Windows 8, don't download an installer - those installers don't work on Windows 8, and you don't need to do this because you can use the Windows Features dialog to enable .NET 3.5: And that *should* do the trick. If you do this before you install other apps that require .NET 3.5 and install a non-SP1 one version of it, you are going to have no problems. Unfortunately for me, even after I've installed the above, when I run the CodeRush installer I still get this lovely dialog: Now I double checked to see if .NET 3.5 is installed - it is, both for 32 bit and 64 bit. I went as far as creating a small .NET Console app and running it to verify that it actually runs. And it does… So naturally I thought the CodeRush installer is a little whacky. After some back and forth Alex Skorkin on Twitter pointed me in the right direction: He asked me to look in the registry for exact info on which version of .NET 3.5 is installed here: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\NET Framework Setup\NDP where I found that .NET 3.5 SP1 was installed. This is the 64 bit key which looks all correct. However, when I looked under the 32 bit node I found: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\NET Framework Setup\NDP\v3.5 Notice that the service pack number is set to 0, rather than 1 (which it was for the 64 bit install), which is what the installer requires. So to summarize: the 64 bit version is installed with SP1, the 32 bit version is not. Uhm, Ok… thanks for that! Easy to fix, you say - just install SP1. Nope, not so easy because the standalone installer doesn't work on Windows 8. I can't get either .NET 3.5 installer or the SP 1 installer to even launch. They simply start and hang (or exit immediately) without messages. I also tried to get Windows to update .NET 3.5 by checking for Windows Updates, which should pick up on the dated version of .NET 3.5 and pull down SP1, but that's also no go. Check for Updates doesn't bring down any updates for me yet. I'm sure at some random point in the future Windows will deem it necessary to update .NET 3.5 to SP1, but at this point it's not letting me coerce it to do it explicitly. How did this happen I'm not sure exactly whether this is the cause and effect, but I suspect the story goes like this: Installed Windows 8 without support for .NET 3.5 Installed Visual Studio 2010 which installs .NET 3.5 (no SP) I now had .NET 3.5 installed but without SP1. I then: Tried to install CodeRush - Error: .NET 3.5 SP1 required Enabled .NET 3.5 in Windows Features I figured enabling the .NET 3.5 Windows Features would do the trick. But still no go. Now I suspect Visual Studio installed the 32 bit version of .NET 3.5 on my machine and Windows Features detected the previous install and didn't reinstall it. This left the 32 bit install at least with no SP1 installed. How to Fix it My final solution was to completely uninstall .NET 3.5 *and* to reboot: Go to Windows Features Uncheck the .NET Framework 3.5 Restart Windows Go to Windows Features Check .NET Framework 3.5 and voila, I now have a proper installation of .NET 3.5. I tried this before but without the reboot step in between which did not work. Make sure you reboot between uninstalling and reinstalling .NET 3.5! More Problems The above fixed me right up, but in looking for a solution it seems that a lot of people are also having problems with .NET 3.5 installing properly from the Windows Features dialog. The problem there is that the feature wasn't properly loading from the installer disks or not downloading the proper components for updates. It turns out you can explicitly install Windows features using the DISM tool in Windows.dism.exe /online /enable-feature /featurename:NetFX3 /Source:f:\sources\sxs You can try this without the /Source flag first - which uses the hidden Windows installer files if you kept those. Otherwise insert the DVD or ISO and point at the path \sources\sxs path where the installer lives. This also gives you a little more information if something does go wrong.© Rick Strahl, West Wind Technologies, 2005-2012Posted in Windows  .NET   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Memory Efficient Windows SOA Server

    - by Antony Reynolds
    Installing a Memory Efficient SOA Suite 11.1.1.6 on Windows Server Well 11.1.1.6 is now available for download so I thought I would build a Windows Server environment to run it.  I will minimize the memory footprint of the installation by putting all functionality into the Admin Server of the SOA Suite domain. Required Software 64-bit JDK SOA Suite If you want 64-bit then choose “Generic” rather than “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” This has links to all the required software. If you choose “Generic” then the Repository Creation Utility link does not show, you still need this so change the platform to “Microsoft Windows 32bit JVM” or “Linux 32bit JVM” to get the software. Similarly if you need a database then you need to change the platform to get the link to XE for Windows or Linux. If possible I recommend installing a 64-bit JDK as this allows you to assign more memory to individual JVMs. Windows XE will work, but it is better if you can use a full Oracle database because of the limitations on XE that sometimes cause it to run out of space with large or multiple SOA deployments. Installation Steps The following flow chart outlines the steps required in installing and configuring SOA Suite. The steps in the diagram are explained below. 64-bit? Is a 64-bit installation required?  The Windows & Linux installers will install 32-bit versions of the Sun JDK and JRockit.  A separate JDK must be installed for 64-bit. Install 64-bit JDK The 64-bit JDK can be either Hotspot or JRockit.  You can choose either JDK 1.7 or 1.6. Install WebLogic If you are using 64-bit then install WebLogic using “java –jar wls1036_generic.jar”.  Make sure you include Coherence in the installation, the easiest way to do this is to accept the “Typical” installation. SOA Suite Required? If you are not installing SOA Suite then you can jump straight ahead and create a WebLogic domain. Install SOA Suite Run the SOA Suite installer and point it at the existing Middleware Home created for WebLogic.  Note to run the SOA installer on Windows the user must have admin privileges.  I also found that on Windows Server 2008R2 I had to start the installer from a command prompt with administrative privileges, granting it privileges when it ran caused it to ignore the jreLoc parameter. Database Available? Do you have access to a database into which you can install the SOA schema.  SOA Suite requires access to an Oracle database (it is supported on other databases but I would always use an oracle database). Install Database I use an 11gR2 Oracle database to avoid XE limitations.  Make sure that you set the database character set to be unicode (AL32UTF8).  I also disabled the new security settings because they get in the way for a developer database.  Don’t forget to check that number of processes is at least 150 and number of sessions is not set, or is set to at least 200 (in the DB init parameters). Run RCU The SOA Suite database schemas are created by running the Repository Creation Utility.  Install the “SOA and BPM Infrastructure” component to support SOA Suite.  If you keep the schema prefix as “DEV” then the config wizard is easier to complete. Run Config Wizard The Config wizard creates the domain which hosts the WebLogic server instances.  To get a minimum footprint SOA installation choose the “Oracle Enterprise Manager” and “Oracle SOA Suite for developers” products.  All other required products will be automatically selected. The “for developers” installs target the appropriate components at the AdminServer rather than creating a separate managed server to house them.  This reduces the number of JVMs required to run the system and hence the amount of memory required.  This is not suitable for anything other than a developer environment as it mixes the admin and runtime functions together in a single server.  It also takes a long time to load all the required modules, making start up a slow process. If it exists I would recommend running the config wizard found in the “oracle_common/common/bin” directory under the middleware home.  This should have access to all the templates, including SOA. If you also want to run BAM in the same JVM as everything else then you need to “Select Optional Configuration” for “Managed Servers, Clusters and Machines”. To target BAM at the AdminServer delete the “bam_server1” managed server that is created by default.  This will result in BAM being targeted at the AdminServer. Installation Issues I had a few problems when I came to test everything in my mega-JVM. Following applications were not targeted and so I needed to target them at the AdminServer: b2bui composer Healthcare UI FMW Welcome Page Application (11.1.0.0.0) How Memory Efficient is It? On a Windows 2008R2 Server running under VirtualBox I was able to bring up both the 11gR2 database and SOA/BPM/BAM in 3G memory.  I allocated a minimum 512M to the PermGen and a minimum of 1.5G for the heap.  The setting from setSOADomainEnv are shown below: set DEFAULT_MEM_ARGS=-Xms1536m -Xmx2048m set PORT_MEM_ARGS=-Xms1536m -Xmx2048m set DEFAULT_MEM_ARGS=%DEFAULT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m set PORT_MEM_ARGS=%PORT_MEM_ARGS% -XX:PermSize=512m -XX:MaxPermSize=768m I arrived at these numbers by monitoring JVM memory usage in JConsole. Task Manager showed total system memory usage at 2.9G – just below the 3G I allocated to the VM. Performance is not stellar but it runs and I could run JDeveloper alongside it on my 8G laptop, so in that sense it was a result!

    Read the article

< Previous Page | 4 5 6 7 8 9 10  | Next Page >