Search Results

Search found 7415 results on 297 pages for 'man behind'.

Page 8/297 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Servers behind load balancer

  - by Tom

  We have a CISCO hardware load balancer with two web servers behind it. We'd like to force some URLs to only be served by one of the machines. Firstly, is the job of the load balancer? or would a better approach be create a subdomain such as http://assets.example.com which would be automatically be routed to one of the servers?

  Read the article

• Ubuntu (9.1) behind a ISA proxy

  - by Dan

  I have set up a Ubuntu PC on a next work that is behind a ISA Proxy. When I run the command sudo apt-get update I get several messages with this message: 502 Proxy Error (The ISA Sever denied the specified Uniform Resource Locator) The computer can see the internet and adding the proxy settings in the Network Preferences does not help. When I do a ifconfig Im on a 192 address which is not the usual subnet our PCs are on. Any ideas?

  Read the article

• Unable to ping to outside network from behind a Linux router

  - by Supratik

  Hi My system is behind a Linux firewall, where eth0 is connected to internet and eth1 is connected to my LAN. The issue is I am not able to ping to outside my network. The iptables rule I have used here as below. iptables -t nat -A POSTROUTING -s 192.168.1.0/24 -p icmp -j SNAT --to-source $PUBLICIP Please correct me if I am doing anything wrong here. Warm Regards Supratik

  Read the article

• Providing a static IP for resources behind AWS Elastic Load Balancer (ELB)

  - by tharrison

  I need a static IP address that handles SSL traffic from a known source (a partner). Our servers are behind an AWS Elastic Load Balancer (ELB), which cannot provide a static IP address; many threads about this here. My thought is to create an instance in EC2 whose sole purpose in life is to be a reverse proxy server having it's own IP address; accepting HTTPS requests and forwarding them to the load balancer. Are there better solutions?

  Read the article

• Is it possible to SSH to linux server behind NAT

  - by Mirage

  I have linux server behind NAT but i can farward the port to LAN computer. How can do that so that at least i can ssh

  Read the article

• what is technology behind bitTorrent?

  - by bvishal4u

  What is bitTorrent protocol, & techology behind it? What is difference between bitTorrent & Content Distribution Network?

  Read the article

• what is technology behind bitTorrent?

  - by bvishal4u

  What is bitTorrent protocol, & techology behind it? What is difference between bitTorrent & Content Distribution Network?

  Read the article

• Pasted image hides behind text even when set to be inline

  - by John

  I copied an image from MSPaint and pasted it into a Word document I'm working on. For some reason the image hides behind the text even with the default "in line with text" setting. Trying other settings don't work as expected either. It does the same when I insert a picture from a file. Can anyone shed any light what would be causing this and how to fix it - I am guessing some formatting issue in the existing document?

  Read the article

• Reason behind system power usage?

  - by user28565

  Hi, when the number of applications running in a pc increases, the power consumed by the PC is also increasing. Is this correct? I think the reason behind this is CPU. Please let me know what role the CPU plays for more power usage. Thanks, Kavi

  Read the article

• new linux windows open behind existing windows

  - by Poul

  I'm running ubuntu and I have a strange issue where any new window I open (open office doc, pidgeon window, etc) open behind current windows. this is frustrating, especially for IM windows as I often don't see the window. Has anyone ever had this issue, and know how to resolve it? Thanks!

  Read the article

• How can I tell if I'm behind a portal or proxy

  - by user19269

  I'm testing out a Content management system on my computer and have emailed their support for a problem regarding login.. They've replied back and asked if my CMS is behind a portal or proxy. I feel kind of stupid for not knowing this, but how do I find out? Everything is local (eg, hosted on my computer, etc). Thanks in advance!

  Read the article

• Using RIA Services FilterDescriptor from code behind

  - by Fermin

  Hi, I was wondering if it's possible to use the FilterDescriptor control from code behind? On the page load of my form I set the datasource of a grid in the code behind, not using a DomainDataSource control, like: TestDomainContext context = new TestDomainContext(); dataGridEmployees.ItemsSource = context.EmployeePositions; context.Load(context.GetEmployeesWithPositionQuery()); I have a textbox on my page that the user can enter into to filter on employee position. Is it now possible to add FilterDescriptor to the source of the DataGrid in code behind? Or would I manually need to filter the results of the context.GetEmployeesWithPositionQuery, for example on KeyUp event of the filter TextBox?

  Read the article

• Access FTPS from behind Forefront TMG

  - by Maxim V. Pavlov

  I have a web server on which IIS 7 host an SSL-enabled site. The client in am trying to connect with is behind the corporate Forefront TMG. The app is Total Commander - a file manager shell, that has the ability to connect to SSL FTP by putting a checkmark over SSL/TLS in the FTP connection settings. When FTP Access Filter in FF is enabled, my connection attempt fails on Negociating TLS step of FTP connection. The same happens even if I enable Allow Active FTP in the filter's settings. But when I disable the FTP Access Filter on FF completely, I am able to connect fine. How to configure FF TMG to allow FTPS?

  Read the article

• Firewall behind firewall

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• We have no SW Firewall behind our office HW firewall, admin says its not req'd

  - by Makach

  I've recently changed jobs and I've been set up with a new workstation. On all previous places where I've been working they've had some sort of local firewall installed on each and every workstation - but here I've been told not to activate it because it is not necessary since we're already behind a HW Firewall. To me this seem a bit naïve, but I cannot emphasise it. I always thought a local firewall was good practice, ie. if something managed to come through the hw firewall there might be a slight chance other computers on the lan would block the internal threath. We got free access to internet and we got a virus checker installed.

  Read the article

• Web server behind MikroTik and dynamic dns

  - by danielrvt

  I recently purchased a MikroTik router, it works great! However, I haven't been able to make my web server work from outside my lan I'll explain better: I have two domains in my disposal, before I switched to Mikrotik, the were working perfectly and all my websites were online. Since I changed the router, every time I try to access my websites from outside my lan, my websites can't be found. I have my websites domains associated with a dynamic dns provider, I managed to create a port forwarding rule to redirect all my incoming traffic from port 80 to my web server, and it works, but only when I'm connected to my MikroTik router. Is there something else I have to do? PD: I also created a static dns rule in my router with my domains to associate it to my webserver (which is behind my router) PD2: All I want is to redirect requests from outside to my webserver...

  Read the article

• RRAS VPN Server on Windows 2008 Behind NAT

  - by Chris

  Ok, so I have kind of a funky setup, let me see if I can describe it. I have a single VMware host with a public IP address 74.xx.xx.x Inside that host, I have 3 VM's Web Server - 1 NIC - 192.168.199.20 SQL Server - 1 NIC - 192.168.199.30 RRAS/VPN Server - 2 NICs 192.168.199.40 & 192.168.199.45 Due to Limitations of my ISP, all of the VM's are connected to the host VIA NAT. I have NAT setup for the webserver so all incoming requests on 74.xx.xx.x via port 80 route to 192.168.199.20. This works fine. Now I want to set up a Windows 2008 VPN server inside this NAT network and forward the correct traffic to it. My questions are as follows? What are the TCP/UDP ports that i have to forward? What special configuration is needed on the server and clients since this is behind a NAT Any other advice would be wonderful.

  Read the article

• Router behind router network setup

  - by optimus

  My relative has bought a router instead of a switch which causes remote-access control issues on his network. His existing network has a 1st router where all PCs are connected via LAN cables. The 2nd router connnects to the 1st router and the remaining PCs are connected to the 2nd router via LAN cables. Normally, I would perform remote-access to help him out with some task. Now it seems all services behind the 2nd router are unavailable to me. How can I resolve this issue?

  Read the article

• Accessing two networks connected to gateway from behind the gateway

  - by Babar

  I have a Windows XP machine acting as internet gateway. It is connected to two different networks, one, say LAN1, connects to internet and other, say LAN2, to outside LAN. My machine is sitting behind the gateway. I have set up internet connection sharing on LAN1 and can access internet on my machine but i can't access anything from LAN2. Is it possible to access internet from LAN1 and yet be able to access PC's on LAN2? -------------- --------- | Lan 1 | | Lan 2 | | (Internet) | --------- -------------- ^ ^ | | | -------------------------- | Win XP Gateway | -------------------------- ^ | -------------- | My Machine | -------------- EDIT: Gateway is equipped with 3 lan sockets, two are connected to Lan 1 & 2, third one is connected to switch. And my machine also connects to that same switch.

  Read the article

• IE9 Kiosk Mode scheduled task opens behind taskbar

  - by greg27

  I've set up a scheduled task in Windows 7 Pro to open up Internet Explorer 9 (x86 version) in kiosk mode. The scheduled task executes when a certain user logs in, and this user is logged in automatically when Windows starts. This is the command I'm using to start IE: "C:\Program Files (x86)\Internet Explorer\iexplore.exe" -k http://example.com So far so good - the computer boots up, the user gets logged in, and IE opens up in kiosk mode. The problem is that IE seems to open behind the taskbar - so the taskbar (start menu, pinned programs, etc.) appears at the bottom of the window, and the bottom of the IE window is visible through the taskbar (since the taskbar is translucent). Is there anything I can do, preferably without installing any third party programs (although I will go for that option if none other is available), to ensure that the IE9 kiosk window always opens in front of the taskbar?

  Read the article

• Necesity of ModSecurity if Apache is behind Nginx

  - by Saif Bechan

  I have my Apache installed behind Nginx. So every request that comes in is first handeled by Nginx. If there is dynamic content needed the request is send to Apache which listens on port 8080. Pretty basic reverse proxy setup. Now with this setup the first entry point is Nginx. Is it still needed to install ModSecurity to protect Apache against unwanted request. Or should I just focus on protecting Nginx as this is the first entry point. All suggestions are welcome.

  Read the article

• OSSEC agent behind NAT

  - by Eric

  I am working on an OSSEC deployment where I will have multiple agents behind 1 public IP. Below is an example of the setup Private Network OSSEC-Agent1 (192.168.1.10) OSSEC-Agent2 (192.168.50.33) OSSEC-Agent3 (10.10.10.1) Those IPs NAT to 1 public IP (1.1.1.1) Then 1.1.1.1 talks to the public OSSEC server on 2.2.2.2 I've read some OSSEC documentation talking about NAT here, but it doesn't tell me exactly what I need to know. Their example is using an entire /24 subnet and mine will mainly have multiple agents to only 1 public IP. With the setup so far, I brought Agent1 online fine and it is communicating to the OSSEC server. However Agent2 continues to fail trying to connect to 2.2.2.2. Even though when I added the key, I had the correct name for it, so I know it talked to the portal at least once for that information. I'm assuming it's just getting confused with the multiple keys to 1 public IP. I basically want to know if this is possible and/or if I'm just overlooking something simple. Any help would be greatly appreciated.

  Read the article

• Web Fonts in Firefox behind Squid

  - by sinping

  It appears as though Firefox requests web fonts (specifically Google's) in a different manner than other browsers. They fail to load when behind Squid as a result, and I'm trying to isolate why. Using this page as a reference in various browsers, Firefox noticeably displays it differently. In the Squid logs, you see hits like this: TCP_DENIED/407 3292 GET http://themes.googleusercontent.com/font? - NONE/- text/html If you load the same page with IE, you see hits like this: TCP_DENIED/407 4389 GET http://themes.googleusercontent.com/static/fonts/federant/v1/C109bUmZeyhh-vIXq9lNfvesZW2xOQ-xsNqO47m55DA.woff - NONE/- text/html So why the difference and how can we make it play nice with Firefox? This is running Squid 3.1.15, but also tested with a few other 3.1.x versions.

  Read the article

• Firefox: This connection is untrusted + Behind corporate firewall

  - by espais

  I've seen some similar issues strewn throughout Google's results about this, but none seem to be corporate-specific. I continually get the 'This connection is untrusted' screen every time I attempt to log into a secure site...for instance Gmail. This is pretty annoying as sometimes I have to go through the process of adding the exception two or three times before it finally lets me into Gmail. I am behind a corporate firewall, going through an internal proxy server to get to the Internet, so there is no possibility for me to update the firewall...etc. Does anybody know a way around this? Can it simply be disabled (and is that safe)? EDIT I'm going to reopen this question with a bit of new information. I have been using Google Chrome lately until today, and one thing that I noticed was that I never had this issue when using either Chrome or Internet Explorer. Is there something that these other browsers do that I need to manually do in FF?

  Read the article

• MySQL slave replication Seconds behind master increasing?

  - by geekmenot

  I started a MySQL slave using innobackupexand the Read_Master_Log_Pos: and the Relay_Log_Pos: are updating however the seconds behind master keeps on increasing (it's at Seconds_Behind_Master:496637 currently and increasing). Any ideas on how to fix this? mysql> SHOW SLAVE STATUS\G *************************** 1. row *************************** Slave_IO_State: Waiting for master to send event Master_Host: 10.8.25.111 Master_User: repl Master_Port: 3306 Connect_Retry: 60 Master_Log_File: mysql-bin.005021 Read_Master_Log_Pos: 279162266 Relay_Log_File: mysql-relay-bin.000004 Relay_Log_Pos: 378939436 Relay_Master_Log_File: mysql-bin.004997 Slave_IO_Running: Yes Slave_SQL_Running: Yes Replicate_Do_DB: Replicate_Ignore_DB: Replicate_Do_Table: Replicate_Ignore_Table: Replicate_Wild_Do_Table: Replicate_Wild_Ignore_Table: Last_Errno: 0 Last_Error: Skip_Counter: 0 Exec_Master_Log_Pos: 378939290 Relay_Log_Space: 26048998487 Until_Condition: None Until_Log_File: Until_Log_Pos: 0 Master_SSL_Allowed: No Master_SSL_CA_File: Master_SSL_CA_Path: Master_SSL_Cert: Master_SSL_Cipher: Master_SSL_Key: Seconds_Behind_Master: 497714 Master_SSL_Verify_Server_Cert: No Last_IO_Errno: 0 Last_IO_Error: Last_SQL_Errno: 0 Last_SQL_Error: Replicate_Ignore_Server_Ids: Master_Server_Id: 1 1 row in set (0.00 sec)

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >