Search Results

Search found 587 results on 24 pages for 'mapper'.

Page 8/24 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• How to check if a cdrom is in the tray remotely (via ssh)?

  - by adempewolff

  I have a server running Ubuntu 10.04 (it's on the other side of the world and I haven't built up the wherewithal to upgrade it remotely yet) and I have been told that there is a CD in one of it's two CD drives. I want to rip an image of the cd and then download it to my local computer (I don't need help with either of these steps). However, I cannot seem to confirm whether or not there actually is a CD in the drive as I was told. It did not automatically mount anywhere (which I'm thinking might just be a result of it being a headless server not running X, nautilus, or any of the other nice user friendly things). There are two CD drives connected via SCSI: austin@austinvpn:/proc/scsi$ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: WDC WD400EB-75CP Rev: 06.0 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Lite-On Model: LTN486S 48x Max Rev: YDS6 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: SAMSUNG Model: CD-R/RW SW-248F Rev: R602 Type: CD-ROM ANSI SCSI revision: 05 However when I try mounting either of these devices (and every other device that could possibly be the cd-drive), it says no medium found: austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd1 /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/scd0 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom /cdrom mount: no medium found on /dev/sr1 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrom1 /cdrom mount: no medium found on /dev/sr0 austin@austinvpn:/proc/scsi$ sudo mount -t iso9660 /dev/cdrw /cdrom mount: no medium found on /dev/sr1 Here are the contents of my /dev folder: austin@austinvpn:/proc/scsi$ ls /dev agpgart loop6 ram6 tty10 tty38 tty8 austinvpn loop7 ram7 tty11 tty39 tty9 block lp0 ram8 tty12 tty4 ttyS0 bsg mapper ram9 tty13 tty40 ttyS1 btrfs-control mcelog random tty14 tty41 ttyS2 bus mem rfkill tty15 tty42 ttyS3 cdrom net root tty16 tty43 urandom cdrom1 network_latency rtc tty17 tty44 usbmon0 cdrw network_throughput rtc0 tty18 tty45 usbmon1 char null scd0 tty19 tty46 usbmon2 console oldmem scd1 tty2 tty47 usbmon3 core parport0 sda tty20 tty48 usbmon4 cpu_dma_latency pktcdvd sda1 tty21 tty49 vcs disk port sda2 tty22 tty5 vcs1 dri ppp sda5 tty23 tty50 vcs2 ecryptfs psaux sg0 tty24 tty51 vcs3 fb0 ptmx sg1 tty25 tty52 vcs4 fd pts sg2 tty26 tty53 vcs5 full ram0 shm tty27 tty54 vcs6 fuse ram1 snapshot tty28 tty55 vcs7 hpet ram10 snd tty29 tty56 vcsa input ram11 sndstat tty3 tty57 vcsa1 kmsg ram12 sr0 tty30 tty58 vcsa2 log ram13 sr1 tty31 tty59 vcsa3 loop0 ram14 stderr tty32 tty6 vcsa4 loop1 ram15 stdin tty33 tty60 vcsa5 loop2 ram2 stdout tty34 tty61 vcsa6 loop3 ram3 tty tty35 tty62 vcsa7 loop4 ram4 tty0 tty36 tty63 vga_arbiter loop5 ram5 tty1 tty37 tty7 zero And here is my fstab file: austin@austinvpn:/proc/scsi$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 /dev/mapper/austinvpn-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=ed5520ae-c690-4ce6-881e-3598f299be06 /boot ext2 defaults 0 2 /dev/mapper/austinvpn-swap_1 none swap sw 0 0 Am I missing something/doing something wrong, or is there just no CD in the drive or is the drive possibly broken? Is there any nice command to list devices with mountable media? Thanks in advance for any help!

  Read the article

• Using Oracle Linux iSCSI targets with Oracle VM

  - by wim.coekaerts

  A few days ago I had written a blog entry on how to use Oracle Solaris 10 (in my case), ZFS and the iSCSI target feature in Oracle Solaris to create a set of devices exported to my Oracle VM server. Oracle Linux can do this as well and I wanted to make sure I also tried out how to do this on Oracle Linux and here are the results. When you install Oracle Linux 5 update 5 (anything newer than update 3), it comes with an rpm called scsi-target-utils. To begin your quest, should you choose to accept it :) make sure this is installed. rpm -qa |grep scsi-target If it is not installed : up2date scsi-target-utils The target utils come with a tool tgtadm which is similar to iscsitadm on Oracle Solaris. There are 2 components again on the iSCSI server side. (1) create volumes - we will use lvm with lvcreate (2) expose a target using tgtadm. My server has a simple setup. All the disks are part of a single volume group called vgroot. To export a 50Gb volume I just create a new volume : lvcreate -L 50G -nmytest1 vgroot This will show up as a new volume in /dev/mapper as /dev/mapper/vgroot-mytest1. Create as many as you want for your environment. Since I already have my blog entry about the 5 volumes, I am not going to repeat the whole thing. You can just go look at the previous blog entry. Now that we have created the volume, we need to use tgtadm to set it up : make sure the service is running : /etc/init.d/tgtd start or service tgtd start (if you want to keep it running you can do chkconfig tgtd on to start it automatically at boottime) Next you need a targetname to set everything up. My recommendation would be to install iscsi-initiator-utils . This will create an iscsi id and put it in /etc/iscsi/initiatorname.iscsi. For convenience you can do : source /etc/iscsi/initiatorname.iscsi echo $InitiatorName and from here on use $InitiatorName instead of the long complex iqn. create your target : tgtadm --lld iscsi --op new --mode target --tid 1 -T $InitiatorName to show the status : tgtadm --lld iscsi --op show --mode target add the volume previously created : tgtadm --lld iscsi --op new --mode logicalunit --tid 1 --lun 1 -b /dev/mapper/vgroot-mytest1 re-run status to see it's there : tgtadm --lld iscsi --op show --mode target and just like on Oracle Solaris you now have to export (bind) it : tgtadm --lld iscsi --op bind --mode target --tid 1 -I iqn.1986-03.com.sun:01:2a7526f0ffff If you want to export the lun to every iscsi initiator then replace the iqn with ALL. Of course you have to add the iqn of each iscsi initiator or client you want to connect. In the case of my 2 node Oracle VM server setup, both Oracle VM server's initiator names would have to be added. use status again to see that it has this iqn under ACL tgtadm --lld iscsi --op show --mode target You can drop the --lld iscsi if you want, or alias it. It just makes the command line more obvious as to what you are doing. Oracle VM side : Refer back to the previous blog entry for the detailed setup of my Oracle VM server volumes but the exact same commands will be used there. discover : iscsiadm --mode discovery --type sendtargets --portal login : iscsiadm --mode node --targetname iscsi targetname --portal --login get devices : /etc/init.d/iscsi restart and voila you should be in business. have fun.

  Read the article

• Not enough free disk space

  - by carmatt95

  I'm new to Ubuntu and I'm getting an error in software updater. When I try and do my daily updates, it says: The upgrade needs a total of 25.3 M free space on disk /boot. Please free at least an additional 25.3 M of disk space on /boot. Empty your trash and remove temporary packages of former installations using sudo apt-get clean. I tried typing in sudo apt-get clean into the terminal but I still get the message. All of the pages I read seem to be for experianced Ubuntuers. Any help would be appreciated. I'm running Ubuntu 12.10. I want to upgrade to 13.04 but understand I have to finish these first. EDIT: @Alaa, This is the output from typing in cat /etc/fstab into the terminal: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> /dev/mapper/ubuntu-root / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda1 during installation UUID=fa55c082-112d-4b10-bcf3-e7ffec6cebbc /boot ext2 defaults 0 2 /dev/mapper/ubuntu-swap_1 none swap sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 matty@matty-G41M-ES2L:~$ df -h: Filesystem Size Used Avail Use% Mounted on /dev/mapper/ubuntu-root 915G 27G 842G 4% / udev 984M 4.0K 984M 1% /dev tmpfs 397M 1.1M 396M 1% /run none 5.0M 0 5.0M 0% /run/lock none 992M 1.8M 990M 1% /run/shm none 100M 52K 100M 1% /run/user /dev/sda1 228M 222M 0 100% /boot matty@matty-G41M-ES2L:~$ dpkg -l | grep linux-image: ii linux-image-3.5.0-17-generic 3.5.0-17.28 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-18-generic 3.5.0-18.29 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-19-generic 3.5.0-19.30 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-21-generic 3.5.0-21.32 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-22-generic 3.5.0-22.34 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-23-generic 3.5.0-23.35 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-24-generic 3.5.0-24.37 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-25-generic 3.5.0-25.39 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP ii linux-image-3.5.0-26-generic 3.5.0-26.42 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP iF linux-image-3.5.0-28-generic 3.5.0-28.48 i386 Linux kernel image for version 3.5.0 on 32 bit x86 SMP

  Read the article

• vtk glyphs 3D, indenpently color and rotation

  - by user3684219

  I try to display thanks to vtk (python wrapper) several glyphs in a scene with each their own colour and rotation. Unfortunately, just the rotation (using vtkTensorGlyph) is taken in consideration by vtk. Reversely, just color is taken in consideration when I use a vtkGlyph3D. Here is a ready to use piece of code with a vtkTensorGlyph. Each cube should have a random color but there all will be in the same color. I read and read again the doc of vtk but I found no solution. Thanks in advance for any idea #!/usr/bin/env python # -*- coding: utf-8 -*- import vtk import scipy.linalg as sc import random as ra import numpy as np import itertools points = vtk.vtk.vtkPoints() # where to locate each glyph in the scene tensors = vtk.vtkDoubleArray() # rotation for each glyph tensors.SetNumberOfComponents(9) colors = vtk.vtkUnsignedCharArray() # should be the color for each glyph colors.SetNumberOfComponents(3) # let's make 10 cubes in the scene for i in range(0, 50, 5): points.InsertNextPoint(i, i, i) # position of a glyph colors.InsertNextTuple3(ra.randint(0, 255), ra.randint(0, 255), ra.randint(0, 255) ) # pick random color rot = list(itertools.chain(*np.reshape(sc.orth(np.random.rand(3, 3)).transpose(), (1, 9)).tolist())) # random rotation matrix (row major) tensors.InsertNextTuple9(*rot) polydata = vtk.vtkPolyData() # create the polydatas polydata.SetPoints(points) polydata.GetPointData().SetTensors(tensors) polydata.GetPointData().SetScalars(colors) cubeSource = vtk.vtkCubeSource() cubeSource.Update() glyphTensor = vtk.vtkTensorGlyph() glyphTensor.SetColorModeToScalars() # is it really work ? try: glyphTensor.SetInput(polydata) except AttributeError: glyphTensor.SetInputData(polydata) glyphTensor.SetSourceConnection(cubeSource.GetOutputPort()) glyphTensor.ColorGlyphsOn() # should not color all cubes independently ? glyphTensor.ThreeGlyphsOff() glyphTensor.ExtractEigenvaluesOff() glyphTensor.Update() # next is usual vtk code mapper = vtk.vtkPolyDataMapper() mapper.SetInputConnection(glyphTensor.GetOutputPort()) actor = vtk.vtkActor() actor.SetMapper(mapper) ren = vtk.vtkRenderer() ren.SetBackground(0.2, 0.5, 0.3) ren.AddActor(actor) renwin = vtk.vtkRenderWindow() renwin.AddRenderer(ren) iren = vtk.vtkRenderWindowInteractor() iren.SetInteractorStyle(vtk.vtkInteractorStyleTrackballCamera()) iren.SetRenderWindow(renwin) renwin.Render() iren.Initialize() renwin.Render() iren.Start()

  Read the article

• Data Mappers, Models and Images

  - by James

  Hi, I've seen and read plenty of blog posts and forum topics talking about and giving examples of Data Mapper / Model implementations in PHP, but I've not seen any that also deal with saving files/images. I'm currently working on a Zend Framework based project and I'm doing some image manipulation in the model (which is being passed a file path), and then I'm leaving it to the mapper to save that file to the appropriate location - is this common practise? But then, how do you deal with creating say 3 different size images from the one passed in? At the moment I have a "setImage($path_to_tmp_name)" which checks the image type, resizes and then saves back to the original filename. A call to "getImagePath()" then returns the current file path which the data mapper can use and then change with a call to "setImagePath($path)" once it's saved it to the appropriate location, say "/content/my_images". Does this sound practical to you? Also, how would you deal with getting the URL to that image? Do you see that as being something that the model should be providing? It seems to me like that model should worry about where the images are being stored or ultimately how they're accessed through a browser and so I'm inclined to put that in the ini file and just pass the URL prefix to the view through the controller. Does that sound reasonable? I'm using GD for image manipulation - not that that's of any relevance. UPDATE: I've been wondering if the image resizing should be done in the model at all. The model could require that it's provided a "main" image and a "thumb" image, both of certain dimensions. I've thought about creating a "getImageSpecs()" function in the model that would return something that defines the required sizes, then a separate image manipulation class could carry out the resizing and (perhaps in the controller?) and just pass the final paths in to the model using something like "setImagePaths($images)". Any thoughts much appreciated :) James.

  Read the article

• How do I create self-relationships in polymorphic inheritance in Elixir and Pylons?

  - by Turukawa

  I am new to programming and am following the example in the Pylons documentation on creating a Wiki. The database I want to link to the wiki was created with Elixir so I rewrote the Wiki database schema and have continued from there. In the wiki there is a requirement for a Navigation table which is inherited by Pages and Sections. A section can have many pages, while a page can only have one section. In addition, each sibling node can be chain-referenced to each other. So: Nav has "section" (OneToMany) and "before" (OneToOne - to reference preceeding node) Page has "section" (ManyToOne - many pages in one section) and inherits "before" Section inherits all from Nav The code I've written looks like this: class Nav(Entity): using_options(inheritance='multi') name = Field(Unicode(30), default=u'Untitled Node') path = Field(Unicode(255), default=u'') section = OneToMany('Page', inverse='section') after = OneToOne('Nav', inverse='before') before = OneToMany('Nav', inverse='after') class Page(Nav): using_options(inheritance='multi') content = Field(UnicodeText, nullable=False) posted = Field(DateTime, default=now()) title = Field(Unicode(255), default=u'Untitled Page') heading = Field(Unicode(255)) tags = ManyToMany('Tag') comments = OneToMany('Comment') section = ManyToOne('Nav', inverse='section') class Section(Nav): using_options(inheritance='multi') Errors received on this: sqlalchemy.exc.OperationalError: (OperationalError) table nav has no column named aftr_id u'INSERT INTO nav (name, path, aftr_id, row_type) VALUES (?, ?, ?, ?)' I've also tried: before = ManyToMany('Nav', inverse='before') on Nav in the hopes this might break the problem, but also not. The original SQLAlchemy code from the tutorial for these declarations is as follows: nav_table = schema.Table('nav', meta.metadata, schema.Column('id', types.Integer(), schema.Sequence('nav_id_seq', optional=True), primary_key=True), schema.Column('name', types.Unicode(255), default=u'Untitled Node'), schema.Column('path', types.Unicode(255), default=u''), schema.Column('section', types.Integer(), schema.ForeignKey('nav.id')), schema.Column('before', types.Integer(), default=None), schema.Column('type', types.String(30), nullable=False) ) page_table = schema.Table('page', meta.metadata, schema.Column('id', types.Integer, schema.ForeignKey('nav.id'), primary_key=True), schema.Column('content', types.Text(), nullable=False), schema.Column('posted', types.DateTime(), default=now), schema.Column('title', types.Unicode(255), default=u'Untitled Page'), schema.Column('heading', types.Unicode(255)), ) section_table = sa.Table('section', meta.metadata, schema.Column('id', types.Integer, schema.ForeignKey('nav.id'), primary_key=True), ) orm.mapper(Nav, nav_table, polymorphic_on=nav_table.c.type, polymorphic_identity='nav') orm.mapper(Section, section_table, inherits=Nav, polymorphic_identity='section') orm.mapper(Page, page_table, inherits=Nav, polymorphic_identity='page', properties={ 'comments':orm.relation(Comment, backref='page', cascade='all'), 'tags':orm.relation(Tag, secondary=pagetag_table) }) Any help is much appreciated.

  Read the article

• Pagination in a Rich Domain Model

  - by user246790

  I use rich domain model in my app. The basic ideas were taken there. For example I have User and Comment entities. They are defined as following: <?php class Model_User extends Model_Abstract { public function getComments() { /** * @var Model_Mapper_Db_Comment */ $mapper = $this->getMapper(); $commentsBlob = $mapper->getUserComments($this->getId()); return new Model_Collection_Comments($commentsBlob); } } class Model_Mapper_Db_Comment extends Model_Mapper_Db_Abstract { const TABLE_NAME = 'comments'; protected $_mapperTableName = self::TABLE_NAME; public function getUserComments($user_id) { $commentsBlob = $this->_getTable()->fetchAllByUserId((int)$user_id); return $commentsBlob->toArray(); } } class Model_Comment extends Model_Abstract { } ?> Mapper's getUserComments function simply returns something like: return $this->getTable->fetchAllByUserId($user_id) which is array. fetchAllByUserId accepts $count and $offset params, but I don't know to pass them from my Controller to this function through model without rewriting all the model code. So the question is how can I organize pagination through model data (getComments). Is there a "beatiful" method to get comments from 5 to 10, not all, as getComments returns by default.

  Read the article

• SQLAlchemy, one to many vs many to one

  - by sadvaw

  Dear Everyone, I have the following data: CREATE TABLE `groups` ( `bookID` INT NOT NULL, `groupID` INT NOT NULL, PRIMARY KEY(`bookID`), KEY( `groupID`) ); and a book table which basically has books( bookID, name, ... ), but WITHOUT groupID. There is no way for me to determine what the groupID is at the time of the insert for books. I want to do this in sqlalchemy. Hence I tried mapping Book to the books joined with groups on book.bookID=groups.bookID. I made the following: tb_groups = Table( 'groups', metadata, Column('bookID', Integer, ForeignKey('books.bookID'), primary_key=True ), Column('groupID', Integer), ) tb_books = Table( 'books', metadata, Column('bookID', Integer, primary_key=True), tb_joinedBookGroup = sql.join( tb_books, tb_groups, \ tb_books.c.bookID == tb_groups.c.bookID) and defined the following mapper: mapper( Group, tb_groups, properties={ 'books': relation(Book, backref='group') }) mapper( Book, tb_joinedBookGroup ) ... However, when I execute this piece of code, I realized that each book object has a field groups, which is a list, and each group object has books field which is a singular assigment. I think my definition here must have been causing sqlalchemy to be confused about the many-to-one vs one-to-many relationship. Can someone help me sort this out? My desired goal is g.books = [b, b, b, .. ] book.group = g, where g is an instance of group, and b is an instance of book

  Read the article

• C++ map to track when the end of map is reached

  - by eNetik

  Currently I have a map that prints out the following map<string, map<int,int> > mapper; map<int,int>::iterator inner; map<string, map<int,int> >::iterator outer; for(outer = mapper.begin(); outer != mapper.end(); outer++){ cout<<outer->first<<": "; for(inner = outer->second.begin(); inner != outer->second.end(); inner++){ cout<<inner->first<<","<<inner->second<<","; } } As of now this prints out the following stringone: 1,2,3,4,6,7,8, stringtwo: 3,5,6,7, stringthree: 2,3,4,5, What i want it to print out is stringone: 1,2,3,4,6,7,8 stringtwo: 3,5,6,7 stringthree: 2,3,4,5 how can i check for the end of the map inside my inner map? Any help would be appreciated Thank you

  Read the article

• Can AutoMapper create a map for an interface and then map with a derived type?

  - by TheCloudlessSky

  I have an interface IFoo: public interface IFoo { int Id { get; set; } } And then a concrete implementation: public class Bar : IFoo { public int Id { get; set; } public string A { get; set; } } public class Baz : IFoo { public int Id { get; set; } public string B { get; set; } } I'd like to be able to map all IFoo but specifying their derived type instead: Mapper.CreateMap<int, IFoo>().AfterMap((id, foo) => foo.Id = id); And then map (without explicitly creating maps for Bar and Baz): var bar = Mapper.Map<int, Bar>(123); // bar.Id == 123 var baz = Mapper.Map<int, Baz>(456); // baz.Id == 456 But this doesn't work in 1.1. I know I could specify all Bar and Baz but if there are 20 of these, I'd like to not have to manage them and rather just have what I did above for creating the map. Is this possible?

  Read the article

• Linux (or Anaconda) installation, RAID 5

  - by user48058

  I having trouble with installation of Fedora and/or Centos. On first steps of installation, on step What type of devices will your installation involve, whatever I choose, same thing happen: I get window with message An unhandled exception has occurred. This is most likely a bug. Please save a copy of the detailed exception and file a bug report. In Details window there are lots of messages. At the end there are: ERR kernel:[ 81.854179] device-mapper: table: 253:1: raid45: unknown target type WARNING kernel:[ 81.854183] device-mapper: ioctl: error adding target to table Same thing occur with several versions of Fedora (17 and 16, x64, live, etc) and with Centos distribution also. Can you please give me some advices how to avoid this messages? Thank you in advance!

  Read the article

• LUKS with LVM, mount is not persistent after reboot

  - by linxsaga

  I have created a Logical vol and used luks to encrypt it. But while rebooting the server. I get a error message (below), therefore I would have to enter the root pass and disable the /etc/fstab entry. So mount of the LUKS partition is not persistent during reboot using LUKS. I have this setup on RHEL6 and wondering what i could be missing. I want to the LV to get be mount on reboot. Later I would want to replace it with UUID instead of the device name. Error message on reboot: "Give root password for maintenance (or type Control-D to continue):" Here are the steps from the beginning: [root@rhel6 ~]# pvcreate /dev/sdb Physical volume "/dev/sdb" successfully created [root@rhel6 ~]# vgcreate vg01 /dev/sdb Volume group "vg01" successfully created [root@rhel6 ~]# lvcreate --size 500M -n lvol1 vg01 Logical volume "lvol1" created [root@rhel6 ~]# lvdisplay --- Logical volume --- LV Name /dev/vg01/lvol1 VG Name vg01 LV UUID nX9DDe-ctqG-XCgO-2wcx-ddy4-i91Y-rZ5u91 LV Write Access read/write LV Status available # open 0 LV Size 500.00 MiB Current LE 125 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 [root@rhel6 ~]# cryptsetup luksFormat /dev/vg01/lvol1 WARNING! ======== This will overwrite data on /dev/vg01/lvol1 irrevocably. Are you sure? (Type uppercase yes): YES Enter LUKS passphrase: Verify passphrase: [root@rhel6 ~]# mkdir /house [root@rhel6 ~]# cryptsetup luksOpen /dev/vg01/lvol1 house Enter passphrase for /dev/vg01/lvol1: [root@rhel6 ~]# mkfs.ext4 /dev/mapper/house mke2fs 1.41.12 (17-May-2010) Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) Stride=0 blocks, Stripe width=0 blocks 127512 inodes, 509952 blocks 25497 blocks (5.00%) reserved for the super user First data block=1 Maximum filesystem blocks=67633152 63 block groups 8192 blocks per group, 8192 fragments per group 2024 inodes per group Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185, 401409 Writing inode tables: done Creating journal (8192 blocks): done Writing superblocks and filesystem accounting information: done This filesystem will be automatically checked every 21 mounts or 180 days, whichever comes first. Use tune2fs -c or -i to override. [root@rhel6 ~]# mount -t ext4 /dev/mapper/house /house PS: HERE I have successfully mounted: [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# vim /etc/fstab -> as follow /dev/mapper/house /house ext4 defaults 1 2 [root@rhel6 ~]# vim /etc/crypttab -> entry as follows house /dev/vg01/lvol1 password [root@rhel6 ~]# mount -o remount /house [root@rhel6 ~]# ls /house/ lost+found [root@rhel6 ~]# umount /house/ [root@rhel6 ~]# mount -a -> SUCCESSFUL AGAIN [root@rhel6 ~]# ls /house/ lost+found Please let me know if I am missing anything here. Thanks in advance.

  Read the article

• Is It Possible To Recover A Partial LVM Logical Volume?

  - by Terry Wang

  Background It is an Ubuntu 12.04 VirtualBox VM with 5 virtual HDDs (VDI), NOTE this is just a test VM, so not well planned ahead: ubuntu.vdi for / (/dev/mapper/ubuntu-root AKA /dev/ubuntu/root) and /home (/dev/mapper/ubuntu-home) weblogic.vdi - /dev/sdb (mounted on /bea for weblogic and other stuff) btrfs1.vdi - /dev/sdc (part of btrfs -m raid1 -d raid1 configuration) btrfs2.vdi - /dev/sdd (part of btrfs -m raid1 -d raid1 configuration) more.vdi - /dev/sde (added this virtual HDD because / ran out of inodes and it wasn't easy to figure out what to delete so as to free up inodes, so I just added the new virtual HDD, created PV, added it to existing volume group ubuntu, grew the root logical volume to work around the inode issue -_-) What happened? Last Friday, before finishing up I wanted to free up some disk space on that box, for some reason I thought the more.vdi was useless and tried to detach it from the VM, I then clicked delete (should have clicked keep files damn!) by mistake when detaching. Unfortunately I didn't have backup for it. All too late. What I have tried Tried to undelete (use testdisk and photorec) the vdi files but it takes too long and recovered heaps of .vdi files that I didn't want (huge, filled the disk, damn!). I finally gave up. Fortunately most of data is on separate ext4 partition and btrfs volumes. Out of curiosity, I still tried to mount the logical volumes and see if it is possible to at least recover the /var and /etc I tried to use system rescue cd to boot and activate the volume groups, I got: Couldn't find device with uuid xxxx. Refusing activation of the partial LV root. Use --partial to override. 1 logical volume(s) in volume group "ubuntu" now active. I was able to mount home LV but not root LV. I am wondering if it is possible to access the root LV any more. Under the bonnet, data (on LV root - /) was striped to more.vdi (PV), I know it's almost impossible to to recover. But I am still curious about how system administrator/DevOps guys deal with this sort of situation;-) Thanks in advance.

  Read the article

• Encrypting a non-linux partition with LUKS.

  - by linuxn00b

  I have a non-Linux partition I want to encrypt with LUKS. The goal is to be able to store it by itself on a device without Linux and access it from the device when needed with an Ubuntu Live CD. I know LUKS can't encrypt partitions in place, so I created another, unformatted partition of the EXACT same size (using GParted's "Round to MiB" option) and ran this command: sudo cryptsetup luksFormat /dev/xxx Where xxx is the partition's device name. Then I typed in my new passphrase and confirmed it. Oddly, the command exited immediately after, so I guess it doesn't encrypt the entire partition right away? Anyway, then I ran this command: sudo cryptsetup luksOpen /dev/xxx xxx Then I tried copying the contents of the existing partition (call it yyy) to the encrypted one like this: sudo dd if=/dev/yyy of=/dev/mapper/xxx bs=1MB and it ran for a while, but exited with this: dd: writing `/dev/mapper/xxx': No space left on device just before writing the last MB. I take this to mean the contents of yyy was truncated when it was copied to xxx, because I have dd'd it before, and whenever I have dd'd to a partition of the exact same size, I never get that error. (and fdisk reports they are the same size in blocks). After a little Googling I discovered all luksFormat'ted partitions have a custom header followed by the encrypted contents. So it appears I need to create a partition exactly the size of the old one + however many bytes a LUKS header is. What size should the destination partition be, no. 1, and no. 2, am I even on the right track here? UPDATE I found this in the LUKS FAQ: I think this is overly complicated. Is there an alternative? Yes, you can use plain dm-crypt. It does not allow multiple passphrases, but on the plus side, it has zero on disk description and if you overwrite some part of a plain dm-crypt partition, exactly the overwritten parts are lost (rounded up to sector borders). So perhaps I shouldn't be using LUKS at all?

  Read the article

• Very poor read performance compared to write performance on md(raid1) / crypt(luks) / lvm

  - by Android5360

  I'm experiencing very poor read performance over raid1/crypt/lvm. In the same time, write speeds are about 2x+ faster on the same setup. On another raid1 setup on the same machine I get normal read speeds (maybe because I'm not using cryptsetup). OS related disks: sda + sdb. I have raid1 configuration with two disks, both are in place. I'm using LVM over the RAID. No encryption. Both disks are WD Green, 5400 rpm. IO test results on this raid1: dd if=/dev/zero of=/tmp/output.img3 bs=8k count=256k conv=fsync - 2147483648 bytes (2.1 GB) copied, 22.3392 s, 96.1 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=/tmp/output.img3 of=/dev/null bs=8k - 2147483648 bytes (2.1 GB) copied, 15.9 s, 135 MB/s And here is the problematic setup (on the same machine). Currently I have only one sdc (WD Green, 5400rpm) configured in software raid1 + crypt (luks, serpent-xts-plain) + lvm. Tomorrow I will attach another disk (sdd) to complete this two-disk raid1 setup. IO tests results on this raid1: dd if=/dev/zero of=output.img3 bs=8k count=256k conv=fsync 2147483648 bytes (2.1 GB) copied, 17.7235 s, 121 MB/s sync echo 3 > /proc/sys/vm/drop_caches dd if=output.img3 of=/dev/null bs=8k 2147483648 bytes (2.1 GB) copied, 36.2454 s, 59.2 MB/s We can see that the read performance is very very bad (59MB/s compared to 135MB/s when using no encryption). Nothing is using the disks during benchmark. I can confirm this because I checked with iostat and dstat. Details on the hardware: disks: all are WD green, 5400rpm, 64mb cache. cpu: FX-8350 at stock speed ram: 4x4GB at 1066Mhz. Details on the software: OS: Debian Wheezy 7, amd64 mdadm: v3.2.5 - 18th May 2012 LVM version: 2.02.95(2) (2012-03-06) LVM Library version: 1.02.74 (2012-03-06) LVM Driver version: 4.22.0 cryptsetup: 1.4.3 Here is how I configured the slow raid1+crypt+lvm setup: parted /dev/sdc mklabel gpt type: ext4 start: 2048s end: -1 Now the raid, crypt and the lvm configuration: mdadm --create /dev/md1 --level=1 --raid-disks=2 missing /dev/sdc cryptsetup --cipher serpent-xts-plain luksFormat /dev/md1 cryptsetup luksOpen /dev/md1 md1_crypt vgcreate vg_sql /dev/mapper/md1_crypt lvcreate -l 100%VG vg_sql -n lv_sql mkfs.ext4 /dev/mapper/vg_sql-lv-sql mount /dev/mapper/vg_sql-lv_sql /sql So guys, can you help me identify the reason and fix it? It has to be something with the cryptsetup as there is no such read slowdown on the other setup (sda+sdb) where no encryption is present. But I have no idea what to do. Thanks!

  Read the article

• Error mounting: mount exited with exit code 13

  - by Mike Williamson

  I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

  Read the article

• Tracking down rogue disk usage

  - by Amadan

  I found several other questions regarding the theory behind my problem (e.g. this, this), but I don't know how to apply the answers to my machine. # du -hsx / 11000283 / # df -kT / Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/mapper/csisv13-root ext4 516032952 361387456 128432532 74% / There is a big difference between 11G (du) and 345G (df). Where are the remaining 334G? It's not in deleted files. There was only one, it was short, and I truncated it just in case. This is what remains: # lsof -a +L1 / COMMAND PID USER FD TYPE DEVICE SIZE/OFF NLINK NODE NAME zabbix_ag 4902 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4902 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4906 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4907 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4908 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4909 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 1w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) zabbix_ag 4910 zabbix 2w REG 252,0 0 0 28836028 /var/log/zabbix-agent/zabbix_agentd.log.1 (deleted) I rebooted to see if fsck does anything. But, from /var/log/boot.log, it seems there are no issues: /dev/mapper/server-root: clean, 3936097/32768000 files, 125368568/131064832 blocks Thinking maybe someone overzealously reserved root space, I checked the master record: # tune2fs -l /dev/mapper/server-root tune2fs 1.42 (29-Nov-2011) Filesystem volume name: <none> Last mounted on: / Filesystem UUID: 86430ade-cea7-46ce-979c-41769a41ecbe Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype needs_recovery extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 32768000 Block count: 131064832 Reserved block count: 6553241 Free blocks: 5696264 Free inodes: 28831903 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 992 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 Flex block group size: 16 Filesystem created: Fri Feb 1 13:44:04 2013 Last mount time: Tue Aug 19 16:56:13 2014 Last write time: Fri Feb 1 13:51:28 2013 Mount count: 9 Maximum mount count: -1 Last checked: Fri Feb 1 13:44:04 2013 Check interval: 0 (<none>) Lifetime writes: 1215 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 First orphan inode: 28836028 Default directory hash: half_md4 Directory Hash Seed: bca55ff5-f530-48d1-8347-25c004f66d43 Journal backup: inode blocks The system is: # uname -a Linux server 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux # cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" Does anyone have any tips on what exactly to do to find and hopefully reclaim the missing space?

  Read the article

• Architecture design with MyBatis mappers

  - by Wolf

  I am creating rest web service for providing data. I am using Spring MVC for handling rest requests, and MyBatis for data access. Application should be designed in the way that it should be easy to change the data access implementation (for example to hibernate or something else) and it has to be fast (so I am trying to avoid unnecessary overcomplication of design). Now my question is about the general design of layers. I would normally use DAO interface and then different implementations for different data access strategies, but MyBatis uses interfaces to access the data. So I can think of 2 possible models but I am not sure which one is better or if there is any other nice way: Controller layer - uses Service layer interfaces services are then implemented for each data access stretegy - for example for mybatis: service implementation uses Mapper classes to access data and do whatever it needs to do with them and sends them to controller layer Controller layer - uses Service layer - service layer uses DAO interfaces DAOs are then implemented for each data access strategy - for example for mybatis: DAO class uses mapper interface to access data and sends them to service layer, service layer then do whatever it needs to do with them and sends them to controller layer I prefer the first strategy as it seems to be less complicated, but then I would have to write all of the service code for another data access again. What do you think? Thank You

  Read the article

• My Android phone isn't being detected by Ubuntu

  - by Lara

  This is what I've got from terminal, looks like it can see the phone as a USB device just fine but isn't showing up under fdisk so I can't mount it. It automounts just fine in my VMWare Windows. And Internet tethering works fine while under Linux (haven't tried under Windows). Here's lsusb: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 019: ID 04d9:1135 Holtek Semiconductor, Inc. Bus 001 Device 003: ID 05ca:18c0 Ricoh Co., Ltd Bus 001 Device 004: ID 0489:e00f Foxconn / Hon Hai Foxconn T77H114 BCM2070 [Single-Chip Bluetooth 2.1 + EDR Adapter] Bus 003 Device 010: ID 04e8:6860 Samsung Electronics Co., Ltd Bus 002 Device 012: ID 046d:c315 Logitech, Inc. Classic New Touch Keyboard And here's sudo fdisk -l: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001ff06 Device Boot Start End Blocks Id System /dev/sda1 2048 681845797 340921875 7 HPFS/NTFS/exFAT /dev/sda2 * 681846784 845686783 81920000 83 Linux /dev/sda3 845686784 968566783 61440000 7 HPFS/NTFS/exFAT /dev/sda4 968568830 972475081 1953126 5 Extended /dev/sda5 968568832 972475081 1953125 82 Linux swap / Solaris Disk /dev/mapper/cryptswap1: 2000 MB, 2000000000 bytes 255 heads, 63 sectors/track, 243 cylinders, total 3906250 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xbe4c2ec7 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• Unable to mount external hard drive - Damaged file system and MFT

  - by Khalifa Abbas Lame

  I get the following error when i try to mount my external hard drive. UNABLE TO MOUNT Error mounting /dev/sdc1 at /media/khalibloo/Khalibloo2: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdc1" "/media/khalibloo/Khalibloo2"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read of MFT, mft=6 count=1 br=-1: Input/output error Failed to open inode FILE_Bitmap: Input/output error Failed to mount '/dev/sdc1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It doesn't mount on windows either: "I/O Device error" it's an ntfs hard drive with a single partition Of course, i tried chkdsk /f. it reported several file segments as unreadable, but didn't say whether it fixed them or not (apparently not). also tried with the /b flag. ntfsfix reported the volume as corrupt. TestDisk was able to fix a small error with the partition table by adding the "80" flag for the active (only) partition. TestDisk also confirmed that the boot sector was fine and it matched the backup. However, when attempting to repair the MFT, it couldn't read the MFT. It also couldn't list the files on the hard drive. It says file system may be damaged. Active@ also shows that MFT is missing or corrupt. So how do i fix the file system? or the MFT?

  Read the article

• Hide icons encrypted file system partitions in Nautilus

  - by Eddy Pronk

  I've installed Ubuntu 10.04 from the alternate CD. It has an encrypted root and swap partition. The root partition is visible in Nautilus as 'File Syste' icon. There is another icon "216 GB Filesystem". If I click it says: Unable to mount 216 GB Filesystem. /dev/mapper/sda5_crypt is mounted. Then there is another icon "6.1 GB Swap Space". If I click it it says: Unable to mount 6.1 GB Swap Space. Not a mountable file system. How can I hide these last two icons? Partition layout: $ sudo fdisk -l /dev/sda [sudo] password for eddyp: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa6e92df4 Device Boot Start End Blocks Id System /dev/sda1 1 11749 94373811 7 HPFS/NTFS /dev/sda2 11871 38914 217219073 5 Extended /dev/sda3 * 11750 11871 976896 83 Linux /dev/sda5 11871 38167 211220480 83 Linux /dev/sda6 38167 38914 5997568 83 Linux Partition table entries are not in disk order Mounted as: $ mount /dev/mapper/sda5_crypt on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) /dev/sda3 on /boot type ext4 (rw) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/eddyp/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=eddyp) /dev/sda1 on /media/S3A6595D003 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_permissions)

  Read the article

• How to re-add RAID-10 dropped drive?

  - by thiesdiggity

  I have a problem that I can't seem to solve. We have a Ubuntu server setup with RAID-10 and two of the drives dropped out of the array. When I try to re-add them using the following command: mdadm --manage --re-add /dev/md2 /dev/sdc1 I get the following error message: mdadm: Cannot open /dev/sdc1: Device or resource busy When I do a "cat /proc/mdstat" I get the following: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [r$ md2 : active raid10 sdb1[0] sdd1[3] 1953519872 blocks 64K chunks 2 near-copies [4/2] [U__U] md1 : active raid1 sda2[0] sdc2[1] 468853696 blocks [2/2] [UU] md0 : active raid1 sda1[0] sdc1[1] 19530688 blocks [2/2] [UU] unused devices: <none> When I run "/sbin/mdadm --detail /dev/md2" I get the following: /dev/md2: Version : 00.90 Creation Time : Mon Sep 5 23:41:13 2011 Raid Level : raid10 Array Size : 1953519872 (1863.02 GiB 2000.40 GB) Used Dev Size : 976759936 (931.51 GiB 1000.20 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Thu Oct 25 09:25:08 2012 State : active, degraded Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K UUID : c6d87d27:aeefcb2e:d4453e2e:0b7266cb Events : 0.6688691 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed 2 0 0 2 removed 3 8 49 3 active sync /dev/sdd1 Output of df -h is: Filesystem Size Used Avail Use% Mounted on /dev/md1 441G 2.0G 416G 1% / none 32G 236K 32G 1% /dev tmpfs 32G 0 32G 0% /dev/shm none 32G 112K 32G 1% /var/run none 32G 0 32G 0% /var/lock none 32G 0 32G 0% /lib/init/rw tmpfs 64G 215M 63G 1% /mnt/vmware none 441G 2.0G 416G 1% /var/lib/ureadahead/debugfs /dev/mapper/RAID10VG-RAID10LV 1.8T 139G 1.6T 8% /mnt/RAID10 When I do a "fdisk -l" I can see all the drives needed for the RAID-10. The RAID-10 is part of the /dev/mapper, could that be the reason why the device is coming back as busy? Anyone have any suggestions on what I can try to get the drives back into the array? Any help would be greatly appreciated. Thanks!

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• Ubuntu Server 11.10 boot, white terminal with garbled black text

  - by SpeedCrazy

  I just installed Ubuntu server 11.10 and the install went fine. This system is running on an Intel Pentium II board with onboard graphics. However when I try to boot into Ubuntu I get a white terminal with garbled black text. I have tried various grub 'fixes' as googling the issue seemed to suggest it was a res or grub related issue. I cannot ssh in so the issue does affect Linux as well. I have had no luck with anything thus far and am at my wits end. This was my first Ubuntu excursion as my friend told me it was better for servers than CentOS because it was easier... Not so much.... Does anyone have any ideas as to what the issue could be? When answering bear in mind I am an Ubuntu noob and Linux novice. As of 1/26/12 I have tried to add the console=ttyl line to the /etc/default/grub and run update-grub. This results in the line in the boot parameters that normally reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root rovt.handoff=7 now reads: linux /vmlunz-3.0.0-12-generic-pae root=/dev/mapper/dev-root ro console=ttyl vt.handoff=7 This does not work. Is there anyway to have console=ttyl inserted on a line by itself? I am at my wits ends, Thanks for all your help, Speed

  Read the article

• SD card won't appear after upgrade to 13.10

  - by Pixel

  My SD card won't mount when I put it into my lap top, everything was fine before the upgrade. The information about the SD card appears just fine when I type "sudo fdisk l " it just says that it doesn't have a valid partition table. When I type "_sudo blkid" I get the following answer: /dev/sda1: UUID="CCA8-9030" TYPE="vfat" /dev/sda2: UUID="8a1d135b-384b-432d-b608-64dcf09ada24" TYPE="ext2" /dev/sda3: UUID="7s6PtU-kj2Z-N8XD-0mzl-840i-i3HG-enlbAf" TYPE="LVM2_member" /dev/sr0: LABEL="Bamboo CD" TYPE="iso9660" /dev/mapper/ubuntu--vg-root: UUID="c9b521c8-7c9f-493b-95c8-a7d79c465318" TYPE="ext4" /dev/mapper/ubuntu--vg-swap_1: UUID="7f155ab6-e1b9-485b-a2bc-443c0622284d" TYPE="swap" When I use lsusb: Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks UVC VGA Webcam Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub I've read the other threads and I couldn't really find any good answers, my card reader was compatible with the previous version of ubuntu, so technically it should still be compatible with the next version. Also I can't erase what's on the card, it contains important data which I need... :/ If you need anymore information just ask, I'll give it as soon as I can. Pixel.

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >