Search Results

Search found 189 results on 8 pages for 'mirrors'.

Page 8/8 | < Previous Page | 4 5 6 7 8 

  • moving raid 10 to another identical server both on Smart Array 6i controllers

    - by SalimQrdl
    I have dead HP DL 380G4 with RAID 1+0 with 1 logical volume from 4x72GB drives on built-in Smart Array 6i 128Mb BBWC. It was shut down properly. It seems it was usual death for Proliant with ILO led 2,3,8 lighting. I want to move array to another identical server with same raid firmware level. What is the best strategy?: I have RAID 1+0 on bay 0 bay 1 bay 2 bay 3 As I understand bay0+bay1 are in RAID 1 , bay2+bay3 are in RAID 1, and both RAID 1 pairs are in RAID 0. So should I : Clear RAID config on new server, insert bay 0, bay 2 and power-on or Create RAID 1+0 with 1 logical volume from clear HDDs , and then poweroff ,remove HDDs and insert 2 HDDs(bay 0, bay 2) from old RAID 1+0. then power-on. (each hdd has its raid position info stored but may be could work on same config) According to documentation for Smart Array 6i it could be possible to migrate. however one requirement point is unclear for me Before you move drives, the following conditions must be met: • The array is in its original configuration. " What is orginal and non-original config for RAID 1+0? Another point "If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time." I want to move one hdd from each RAID 1 pair. to have mirrors untouched just in case. Do they mean to move all 4 simultaniously? Smart Array 6i User Guide: Moving Drives and Arrays You can move drives to other ID positionson the same array controller. You can also move a complete arrayfrom one controller to another, even if the controllers are on different servers. Before you move drives, the following conditions must be met: • If moving thedrives to a different server, the new server must have enough empty bays to accommodate all the drives simultaneously. • The move will not result in more than 14 physical drives per controller channel. • No controller will be configured with more than 32 logical volumes. • The array has no failed or missing drives. • The array is in its original configuration. • The controller is not reading from or writing to any of the spare drives in the array. • The controller is not running capacity expansion, capacity extension, or RAID or stripe size migration. • The controller is using the latestfirmware version (recommended). If you want to move an array to another controller, you must also consider the following additional limitations: • All drives in the array must be moved at the same time. • In most cases, a moved array (and the logical drives that it contains) can still undergo arraycapacity expansion, logical drive capacity extension, or migration of RAID level orstripe size. When all the conditions have been met: Back up all data before removing any drives or changing configuration. This step is requiredif you are moving data-containing drives from a controller that does not have a battery-backed cache. Power down the system. If you are moving an array from a controller that contains a RAID ADG logical volume to a controller that does not support RAID ADG: Move the drives. Power up the system. If a 1724 POST message is displayed, drive positions were changed successfully and the configuration was updated. If a 1785 (NotConfigured)POST message is displayed: a. Power down the system immediately to prevent data loss. b. Return the drives to their original locations. c. Restore the data from backup, if necessary. Check the new drive configuration byrunning ORCA or ACU ("Configuring an Array" on page 9).

    Read the article

  • ovs-vsctl: "eth0" is not a valid UUID

    - by Przemek Lach
    I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

    Read the article

  • php-common causing conflict

    - by Cornwell
    I'm trying to install php-pdo but it always fails because of php-common bash-3.2# yum install php-pdo Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-epel.mirror.lstn.net Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-pdo.i386 0:5.1.6-40.el5_9 set to be updated --> Processing Dependency: php-common = 5.1.6-40.el5_9 for package: php-pdo --> Finished Dependency Resolution php-pdo-5.1.6-40.el5_9.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) Error: Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package. Installing php-common I get: bash-3.2# yum install php-common Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * epel: fedora-epel.mirror.lstn.net Setting up Install Process Package matching php-common-5.1.6-40.el5_9.i386 already installed. Checking for update. Nothing to do Searched here and google but couldn't find anything that worked EDIT: Added new repositories: bash-3.2# yum install php-common Loaded plugins: fastestmirror Repository base is listed more than once in the configuration Repository addons is listed more than once in the configuration Repository extras is listed more than once in the configuration Repository centosplus is listed more than once in the configuration Repository contrib is listed more than once in the configuration Loading mirror speeds from cached hostfile * addons: mirror.raystedman.net * base: mirror.5ninesolutions.com * centosplus: mirror.anl.gov * contrib: yum.singlehop.com * epel: fedora-epel.mirror.lstn.net * extras: centos.unmeteredvps.net * update: mirror.team-cymru.org addons | 1.9 kB 00:00 base | 1.1 kB 00:00 centosplus | 1.9 kB 00:00 centosplus/primary_db | 53 kB 00:01 contrib | 1.9 kB 00:00 contrib/primary_db | 1.1 kB 00:00 epel | 3.6 kB 00:00 extras | 2.1 kB 00:00 nginx | 2.5 kB 00:00 update | 1.9 kB 00:00 update/primary_db | 84 kB 00:04 updates | 1.9 kB 00:00 Setting up Install Process Package matching php-common-5.1.6-40.el5_9.i386 already installed. Checking for update. Nothing to do And then... bash-3.2# yum install php-pdo Loaded plugins: fastestmirror Repository base is listed more than once in the configuration Repository addons is listed more than once in the configuration Repository extras is listed more than once in the configuration Repository centosplus is listed more than once in the configuration Repository contrib is listed more than once in the configuration Loading mirror speeds from cached hostfile * addons: mirror.raystedman.net * base: centos.mirror.lstn.net * centosplus: mirror.anl.gov * contrib: yum.singlehop.com * epel: fedora-epel.mirror.lstn.net * extras: centos.unmeteredvps.net * update: mirrors.loosefoot.com Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-pdo.i386 0:5.1.6-40.el5_9 set to be updated --> Processing Dependency: php-common = 5.1.6-40.el5_9 for package: php-pdo --> Finished Dependency Resolution php-pdo-5.1.6-40.el5_9.i386 from base has depsolving problems --> Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) Error: Missing Dependency: php-common = 5.1.6-40.el5_9 is needed by package php-pdo-5.1.6-40.el5_9.i386 (base) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest The program package-cleanup is found in the yum-utils package.

    Read the article

  • Strategy for using snapshots to back up Ubuntu Linux server?

    - by MountainX
    I need some backup advice for my home file server. Here are the mount points, volume groups, logical volumes and used/total space of all the volumes on my Ubuntu 8.10 home file server. / vgA/lvRoot [7.5G/50G] /tmp vgB/lvTmp [195M/30G] /var vgB/lvVar [780M/30G] swap vgB/lvSwap [16.00 GB] /media1 vgC/lvMedia1 [400G/975G] /media2 vgC/lvMedia2 [75G/295G] /boot partition (no volume group) [95M/200M] /video partition (no volume group) [450G/950G] /backups vgD/lvBackupTarget [800G/925G] /home vgE/lvHome [85G/200G] I have just added a 2.0 TB external USB drive that I would like to use to backup everything. (It will be a close fit to get it all on one 2.0 TB drive. I actually have a 2nd external USB drive if needed.) I'd like to backup "/", var, /media1, media2 and /home. I'll deal with /boot and /video separately since they are not logical volumes. For all the logical volumes I'm anticipating taking snapshots and then copying those snapshots to the 2.0 TB external USB drive. I have never done a task like that before. If I do that, I could use the tutorial I found here: http://www.howtoforge.com/linux_lvm_snapshots My questions are: What is the best overall strategy? Is it LVM snapshots, as I'm assuming? How should I prepare, subdivide and mount the 2.0 TB external USB drive? 2.a. Should I create one or more regular partitions or should I create a physical volume with one or more logical volumes? 2.b. Would it be advisable to extactly mirror the source pv/lv layout on the external drive, and if so, is this a good strategy? What's the best way to get the snapshots onto the external drive? dd? Even though this is a strategy question, feedback with actual commands is appreciated. I need step-by-step cookbook-style help because I don't do much server admin work. (Background: This is a home file server that I have rarely had to touch in about 2 years. It has done its job without much intervention. The really old PC that I used to back everything up recently failed, so I'm replacing that with the external USB drive(s) and I'd like to upgrade my backup strategy at the same time. Previously, I just copied stuff from /backups over to the other computer and that would not have made things very easy in a real restore situation. The /backups mount point contains backup copies of "most" of the important data on a file by file basis, but it does not contain copies of /boot, etc. BTW, the actual internal HDD that holds /backups is separate from the other storage devices.) EDIT: I'll propose a strategy... The idea came from a comment here: LVM mirroring VS RAID1 "LVM mirrors are for replication of a logical volume to a different physical volume. It's essentially meant to "move the data to a different disk". The mirror is then broken..." That would fit my requirements well. Here is an ideal situation: establish the LV mirror on the external drive break the link with the mirror create a (persistent) snapshot on the mirror after a week, resync the mirror with the original source and update the mirror break the link and create another snapshot on the mirror. Obviously, the mirror will be like a weekly full backup. And the snapshots on the mirror will represent earlier points in time. If this would work and if it would be time efficient, it would give a nice full & differential type backup on the external drive based on LVM. I have not heard of a strategy like this before. Will it work? Could it be scripted? Thoughts? EDIT 2: Creating Portable DiskSafes With LoopbackFS And LVM Snapshots This article seems intriguing: http://www.howtoforge.com/creating-portable-disksafes-with-loopbackfs-and-lvm-snapshots Unfortunately, I don't understand exactly how to map those ideas to the strategy I'm proposing above. I'm going to ask this last bit as a separate question. I will leave my original question in place because I still desire feedback on the overall best strategy. At this moment I'm assuming it is LVM mirroring in the style of "Creating Portable DiskSafes with LVM Snapshots" but that might be wrong.

    Read the article

  • How to install MariaDB rpms in CentOS 6.4 using rpm (not yum cmd) + handling mysql-libs conflicts

    - by Pat C
    I need to script the install of MariaDB using the rpm command in CentOS 6.4. I can't use yum since it's going to be an offline install so there's no access to the repository. The only MySQL package installed is mysql-libs as various other packages in CentOS depend on it. When I did a test install of MariaDB with yum it correctly accounted for mysql-libs and uninstalled it at the end as MariaDB could handle the dependencies after it was installed: [root@new-host-6 ~]# yum install MariaDB-client MariaDB-common MariaDB-compat MariaDB-devel MariaDB-server MariaDB-shared Loaded plugins: downloadonly, fastestmirror, refresh-packagekit, security, verify Loading mirror speeds from cached hostfile * base: mirrors.kernel.org * extras: mirror.keystealth.org * updates: mirror.umd.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package MariaDB-client.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-common.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-compat.x86_64 0:5.5.32-1 will be obsoleting ---> Package MariaDB-devel.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-server.x86_64 0:5.5.32-1 will be installed ---> Package MariaDB-shared.x86_64 0:5.5.32-1 will be obsoleting ---> Package mysql-libs.x86_64 0:5.1.66-2.el6_3 will be obsoleted --> Finished Dependency Resolution Dependencies Resolved ==================================================================================================================================================================== Package Arch Version Repository Size ==================================================================================================================================================================== Installing: MariaDB-client x86_64 5.5.32-1 mariadb 10 M MariaDB-common x86_64 5.5.32-1 mariadb 23 k MariaDB-compat x86_64 5.5.32-1 mariadb 2.7 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 MariaDB-devel x86_64 5.5.32-1 mariadb 5.6 M MariaDB-server x86_64 5.5.32-1 mariadb 34 M MariaDB-shared x86_64 5.5.32-1 mariadb 1.1 M replacing mysql-libs.x86_64 5.1.66-2.el6_3 Transaction Summary ==================================================================================================================================================================== Install 6 Package(s) Total download size: 53 M Is this ok [y/N]: y Downloading Packages: (1/6): MariaDB-5.5.32-centos6-x86_64-client.rpm | 10 MB 00:06 (2/6): MariaDB-5.5.32-centos6-x86_64-common.rpm | 23 kB 00:00 (3/6): MariaDB-5.5.32-centos6-x86_64-compat.rpm | 2.7 MB 00:02 (4/6): MariaDB-5.5.32-centos6-x86_64-devel.rpm | 5.6 MB 00:06 (5/6): MariaDB-5.5.32-centos6-x86_64-server.rpm | 34 MB 00:23 (6/6): MariaDB-5.5.32-centos6-x86_64-shared.rpm | 1.1 MB 00:00 -------------------------------------------------------------------------------------------------------------------------------------------------------------------- Total 1.3 MB/s | 53 MB 00:40 warning: rpmts_HdrFromFdno: Header V4 DSA/SHA1 Signature, key ID 1bb943db: NOKEY Retrieving key from https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Importing GPG key 0x1BB943DB: Userid: "Daniel Bartholomew (Monty Program signing key) <[email protected]>" From : https://yum.mariadb.org/RPM-GPG-KEY-MariaDB Is this ok [y/N]: y Running rpm_check_debug Running Transaction Test Transaction Test Succeeded Running Transaction Warning: RPMDB altered outside of yum. Installing : MariaDB-compat-5.5.32-1.x86_64 1/7 Installing : MariaDB-common-5.5.32-1.x86_64 2/7 Installing : MariaDB-server-5.5.32-1.x86_64 3/7 chown: cannot access `/var/lib/mysql': No such file or directory PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER ! To do so, start the server, then issue the following commands: '/usr/bin/mysqladmin' -u root password 'new-password' '/usr/bin/mysqladmin' -u root -h new-host-6 password 'new-password' Alternatively you can run: '/usr/bin/mysql_secure_installation' which will also give you the option of removing the test databases and anonymous user created by default. This is strongly recommended for production servers. See the MariaDB Knowledgebase at http://kb.askmonty.org or the MySQL manual for more instructions. Please report any problems with the '/usr/bin/mysqlbug' script! The latest information about MariaDB is available at http://mariadb.org/. You can find additional information about the MySQL part at: http://dev.mysql.com Support MariaDB development by buying support/new features from Monty Program Ab. You can contact us about this at [email protected]. Alternatively consider joining our community based development effort: http://kb.askmonty.org/en/contributing-to-the-mariadb-project/ Installing : MariaDB-devel-5.5.32-1.x86_64 4/7 Installing : MariaDB-client-5.5.32-1.x86_64 5/7 Installing : MariaDB-shared-5.5.32-1.x86_64 6/7 Erasing : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Verifying : MariaDB-common-5.5.32-1.x86_64 1/7 Verifying : MariaDB-server-5.5.32-1.x86_64 2/7 Verifying : MariaDB-devel-5.5.32-1.x86_64 3/7 Verifying : MariaDB-client-5.5.32-1.x86_64 4/7 Verifying : MariaDB-compat-5.5.32-1.x86_64 5/7 Verifying : MariaDB-shared-5.5.32-1.x86_64 6/7 Verifying : mysql-libs-5.1.66-2.el6_3.x86_64 7/7 Installed: MariaDB-client.x86_64 0:5.5.32-1 MariaDB-common.x86_64 0:5.5.32-1 MariaDB-compat.x86_64 0:5.5.32-1 MariaDB-devel.x86_64 0:5.5.32-1 MariaDB-server.x86_64 0:5.5.32-1 MariaDB-shared.x86_64 0:5.5.32-1 Replaced: mysql-libs.x86_64 0:5.1.66-2.el6_3 Complete! My question is, what is the equivalent way to install the MariaDB packages using the rpm command only as opposed to yum? If I do rpm -ivh MariaDB*.rpm, I will get a ton of messages like the following about conflicts with mysql-libs: file /etc/my.cnf from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 file /usr/share/mysql/charsets/Index.xml from install of MariaDB-common-5.5.32-1.x86_64 conflicts with file from package mysql-libs-5.1.66-2.el6_3.x86_64 I then used the --force option to install the MariaDB rpms and uninstalled mysql-lib, I didn't get any weird messages but I'm not sure that is the cleanest method to handle the conflicts and do the install. So can someone confirm that installing MariaDB with the following rpm commands would be the same as using yum to install the packages and handle mysql-libs conflicts/removal: rpm -ivh --force MariaDB*.rpm rpm -e mysql-libs Thanks for any input!

    Read the article

  • Using Oracle Enterprise Manager Ops Center to Update Solaris via Live Upgrade

    - by LeonShaner
    Introduction: This Oracle Enterprise Manager Ops Center blog entry provides tips for using Ops Center to update Solaris using Live Upgrade on Solaris 10 and Boot Environments on Solaris 11. Why use Live Upgrade? Live Upgrade (LU) can significantly reduce downtime associated with patching Live Upgrade avoids dropping to single-user mode for long periods of time during patching Live Upgrade relies on an Alternate Boot Environment (ABE)/(BE), which is patched while in multi-user mode; thereby allowing normal system operations to continue with the active BE, while the alternate BE is being patched Activating an newly patched (A)BE is essentially a reboot; therefore the downtime is ~= reboot Admins can easily revert to the prior Boot Environment (BE) as a safeguard / fallback. Why use Ops Center to patch via Live Upgrade, Alternate Boot Environments, and Solaris 11 equivalents? All the benefits of Ops Center's extensive patch and package knowledge base can be leveraged on top of Live Upgrade Ops Center can orchestrate patching based on Live Upgrade and Solaris 11 features, which all works together to minimize downtime Ops Centers advanced inventory and reporting features assurance that each OS is updated to a verifiable, consistent standard, rather than relying on ad-hoc (error prone) procedures and scripts Ops Center gives admins control over the boot environment specifications or they can let Ops Center decide when a BE is necessary, thereby reducing complexity and lowering the opportunity for user error Preparing to use Live Upgrade-like features in Solaris 11 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Solaris 11 has features which are similar in concept to Live Upgrade on Solaris 10, but differ greatly in implementationImportant distinctions: Solaris 11 assumes ZFS root Solaris 11 adds Boot Environments (BE's) as an integrated feature (see beadm) Solaris 11 BE's avoid single-user patching (vs. Solaris 10 w/ ZFS snapshot=ABE). Solaris 11 Image Packaging System (IPS) has hooks for BE creation, as needed Solaris 11 allows pkgs to be installed + upgraded in alternate BE (e.g. instead of the live system) but it is controlled on a per-pkg basis Boot Environments are activated across a reboot; instead of spending long periods installing + upgrading packages in single user mode. Fallback to a prior BE is a function of the BE infrastructure (a la beadm). (Generally) Reboot + BE activation can be much much faster on Solaris 11 Preparing to use Live Upgrade on Solaris 10 Requirements and information you should know: Global Zone Root file-systems must be separate from Solaris Container / Zone filesystems Live Upgrade Pre-requisite patches must be applied before the first Live Upgrade Alternate Boot Environments are created (see "Pre-requisite Patches" section, below...) Solaris 10 Update 6 or newer on ZFS root is the practical starting point for Live Upgrade Live Upgrade with ZFS root is far more straight-forward than any scheme based on Alternative Boot Environments in slices or temporarily breaking mirrors Use Solaris best practices to upgrade the OS to at least Solaris 10 Update 4 (outside of Ops Center) UFS root can (technically) be used, but it is significantly more involved (e.g. discouraged) -- there are many reasons to move to ZFS while going through the process to update to Solaris 10 Update 6 or newer (out side of Ops Center) Recommendation: Start with Solaris 10 Update 6 or newer on ZFS root Recommendation: Start with Ops Center 12c or newer Ops Center 12c can automatically create your ABE's for you, without the need for custom scripts Ops Center 12c Update 2 avoids kernel panic on unpatched Solaris 10 update 9 (and older) -- unrelated to Live Upgrade, but more on the issue, below. NOTE: There is no magic!  If you have systems running Solaris 10 Update 5 or older on UFS root, and you don't know how to get them updated to Solaris 10 on ZFS root, then there are services available from Oracle Advanced Customer Support (ACS), which specialize in this area. Live Upgrade Pre-requisite Patches (Solaris 10) Certain Live Upgrade related patches must be present before the first Live Upgrade ABE's are created on Solaris 10.Use the following MOS Search String to find the “living document” that outlines the required patch minimums, which are necessary before using any Live Upgrade features: Solaris Live Upgrade Software Patch Requirements(Click above – the link is valid as of this writing, but search in MOS for the same "Solaris Live Upgrade Software Patch Requirements" string if necessary) It is a very good idea to check the document periodically and adapt to its contents, accordingly.IMPORTANT:  In case it wasn't clear in the above document, some direct patching of the active OS, including a reboot, may be required before Live Upgrade can be successfully used the first time.HINT: You can use Ops Center to determine what to expect for a given system, and to schedule the “pre-patching” during a maintenance window if necessary. Preparing to use Ops Center Discover + Manage (Install + Configure the Ops Center agent in) each Global Zone Recommendation:  Begin by using OCDoctor --agent-prereq to determine whether OS meets OC prerequisites (resolve any issues) See prior requirements and recommendations w.r.t. starting with Solaris 10 Update 6 or newer on ZFS (or at least Solaris 10 Update 4 on UFS, with caveats) WARNING: Systems running unpatched Solaris 10 update 9 (or older) should run the Ops Center 12c Update 2 agent to avoid a potential kernel panic The 12c Update 2 agent will check patch minimums and disable certain process accounting features if the kernel is not sufficiently patched to avoid the panic SPARC: 142900-05 Obsoleted by: 142900-06 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142901-05 Obsoleted by: 142901-06 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) OR SPARC: 142909-17 SunOS 5.10: kernel patch 10 Oracle Solaris on SPARC (32-bit) X64: 142910-17 SunOS 5.10_x86: kernel patch 10 Oracle Solaris on x86 (32-bit) Ops Center 12c (initial release) and 12c Update 1 agent can also be safely used with a workaround (to be performed BEFORE installing the agent): # mkdir -p /etc/opt/sun/oc # echo "zstat_exacct_allowed=false" > /etc/opt/sun/oc/zstat.conf # chmod 755 /etc/opt/sun /etc/opt/sun/oc # chmod 644 /etc/opt/sun/oc/zstat.conf # chown -Rh root:sys /etc/opt/sun/oc NOTE: Remove the above after patching the OS sufficiently, or after upgrading to the 12c Update 2 agent Using Ops Center to apply Live Upgrade-related Pre-Patches (Solaris 10)Overview: Create an OS Update Profile containing the minimum LU-related pre-patches, based on the Solaris Live Upgrade Software Patch Requirements, previously mentioned. SIMULATE the deployment of the LU-related pre-patches Observe whether any of the LU-related pre-patches will require a reboot The job details for each Global Zone will advise whether a reboot step will be required ACTUALLY deploy the LU-related pre-patches, according to your change control process (e.g. if no reboot, maybe okay to do now; vs. must do later because of the reboot). You can schedule the job to occur later, during a maintenance window Check the job status for each node, resolving any issues found Once the LU-related pre-patches are applied, you can Ops Center to patch using Live Upgrade on Solaris 10 Using Ops Center to patch Solaris 10 with LU/ABE's -- the GOODS!(this is the heart of the tip): Create an OS Update Profile containing the patches that make up your standard build Use Solaris Baselines when possible Add other individual patches as needed ACTUALLY deploy the OS Update Profile Specify the appropriate Live Upgrade options, e.g. Synchronize the active BE to the alternate BE before patching Do not activate the BE after patching Check the job status for each node, resolving any issues found Activate the newly patched BE according to your change control process Activate = Reboot to the ABE, making the ABE the new active BE Ops Center does not separate LU activate from reboot, so expect a reboot! Check the job status for each node, resolving any issues found Examples (w/Screenshots) Solaris 10 and Live Upgrade: Auto-Create the Alternate Boot Environment (ZFS root only) ABE to be created on ZFS with name S10_12_07REC (Example) Uses built in feature to call “lucreate -n S10_12_07REC” behind scenes if not already present NOTE: Leave “lucreate” params blank (if you do specify options, the will be appended after -n $ABEName) Solaris 10 and Live Upgrade: Alternate Boot Environment Creation via Operational Profile (script) The Alternate Boot Environment is to be created via custom, user-supplied script, which does whatever is needed for the system where Live Upgrade will be used. Operational Profile, which provides the script to create an ABE: Very similar to the automatic case, but with a Script (Operational Profile), which is used to create the ABE Relies on user-supplied script in the form of an Operational Profile Could be used to prepare an ABE based on a UFS root in a slice, or on a separate device (e.g. by breaking a mirror first) – it is up to the script author to do the right thing! EXAMPLE: Same result as the ZFS case, but illustrating the Operational Profile (e.g. script) approach to call: # lucreate -n S10_1207REC NOTE: OC special variable is $ABEName Boot Environment Profile, which references the Operational Profile Script = Operational Profile on this screen Refers to Operational Profile shown in the previous section The user-supplied S10_Create_BE Operational Profile will be run The Operational Profile must send a non-zero exit code if there is a problem (so that the OS Update job will not proceed) Solaris 10 OS Update Profile (to provide the actual patch specifications) Solaris 10 Baseline “Recommended” chosen for “Install” Solaris 10 OS Update Plan (two-steps in this case) “Create a Boot Environment” + “Update OS” are chosen. Using Ops Center to patch Solaris 11 with Boot Environments (as needed) Create a Solaris 11 OS Update Profile containing the packages that make up your standard build ACTUALLY deploy the Solaris 11 OS Update Profile BE will be created if needed (or you can stipulate no BE) BE name will be auto-generated (if needed), or you may specify a BE name Check the job status for each node, resolving any issues found Check if a BE was created; if so, activate the new BE Activate = Reboot to the BE, making the new BE the active BE Ops Center does not separate BE activate from reboot NOTE: Not every Solaris 11 OS Update will require a new BE, so a reboot may not be necessary. Solaris 11: Auto BE Create (as Needed -- let Ops Center decide) BE to be created as needed BE to be named automatically Reboot (if necessary) deferred to separate step Solaris 11: OS Profile Solaris 11 “entire” chosen for a particular SRU Solaris 11: OS Update Plan (w/BE)  “Create a Boot Environment” + “Update OS” are chosen. Summary: Solaris 10 Live Upgrade, Alternate Boot Environments, and their equivalents on Solaris 11 can be very powerful tools to help minimize the downtime associated with updating your servers.  For very old Solaris, there are some important prerequisites to adhere to, but once the initial preparation is complete, Live Upgrade can be used going forward.  For Solaris 11, the built-in Boot Environment handling is leveraged directly by the Image Packaging System, and the result is a much more straight forward way to patch, and far fewer prerequisites to satisfy in getting there.  Ops Center simplifies using either approach, and helps you improve consistency from system to system, which ultimately helps you improve the overall up-time across all the Solaris systems in your environment. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • CodePlex Daily Summary for Friday, January 28, 2011

    CodePlex Daily Summary for Friday, January 28, 2011Popular ReleasesVFPX: VFP2C32 2.0.0.8 Release Candidate: This release includes several bugfixes, new functions and finally a CHM help file for the complete library.EnhSim: EnhSim 2.3.3 ALPHA: 2.3.3 ALPHAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added back in a p...DB>doc for Microsoft SQL Server: 1.0.0.0: Initial release Supported output HTML WikiPlex markup Raw XML Supported objects Tables Primary Keys Foreign Keys ViewsmojoPortal: 2.3.6.1: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2361-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Office Web.UI: Alpha preview: This is the first alpha release. Very exciting moment... This download is just the demo application : "Contoso backoffice Web App". No source included for the moment, just the app, for testing purposes and for feedbacks !! This package includes a set of official MS Office icons (143 png 16x16 and 132 png 32x32) to really make a great app ! Please rate and give feedback ThanksParallel Programming with Microsoft Visual C++: Drop 6 - Chapters 4 and 5: This is Drop 6. It includes: Drafts of the Preface, Introduction, Chapters 2-7, Appendix B & C and the glossary Sample code for chapters 2-7 and Appendix A & B. The new material we'd like feedback on is: Chapter 4 - Parallel Aggregation Chapter 5 - Futures The source code requires Visual Studio 2010 in order to run. There is a known bug in the A-Dash sample when the user attempts to cancel a parallel calculation. We are working to fix this.Catel - WPF and Silverlight MVVM library: 1.1: (+) Styles can now be changed dynamically, see Examples application for a how-to (+) ViewModelBase class now have a constructor that allows services injection (+) ViewModelBase services can now be configured by IoC (via Microsoft.Unity) (+) All ViewModelBase services now have a unit test implementation (+) Added IProcessService to run processes from a viewmodel with directly using the process class (which makes it easier to unit test view models) (*) If the HasErrors property of DataObjec...NodeXL: Network Overview, Discovery and Exploration for Excel: NodeXL Excel Template, version 1.0.1.160: The NodeXL Excel template displays a network graph using edge and vertex lists stored in an Excel 2007 or Excel 2010 workbook. What's NewThis release improves NodeXL's Twitter and Pajek features. See the Complete NodeXL Release History for details. Installation StepsFollow these steps to install and use the template: Download the Zip file. Unzip it into any folder. Use WinZip or a similar program, or just right-click the Zip file in Windows Explorer and select "Extract All." Close Ex...Kooboo CMS: Kooboo CMS 3.0 CTP: Files in this downloadkooboo_CMS.zip: The kooboo application files Content_DBProvider.zip: Additional content database implementation of MSSQL, RavenDB and SQLCE. Default is XML based database. To use them, copy the related dlls into web root bin folder and remove old content provider dlls. Content provider has the name like "Kooboo.CMS.Content.Persistence.SQLServer.dll" View_Engines.zip: Supports of Razor, webform and NVelocity view engine. Copy the dlls into web root bin folder to enable...UOB & ME: UOB ME 2.6: UOB ME 2.6????: ???? V1.0: ???? V1.0 ??Password Generator: 2.2: Parallel password generation Password strength calculation ( Same method used by Microsoft here : https://www.microsoft.com/protect/fraud/passwords/checker.aspx ) Minor code refactoringVisual Studio 2010 Architecture Tooling Guidance: Spanish - Architecture Guidance: Francisco Fagas http://geeks.ms/blogs/ffagas, Microsoft Most Valuable Professional (MVP), localized the Visual Studio 2010 Quick Reference Guidance for the Spanish communities, based on http://vsarchitectureguide.codeplex.com/releases/view/47828. Release Notes The guidance is available in a xps-only (default) or complete package. The complete package contains the files in xps, pdf and Office 2007 formats. 2011-01-24 Publish version 1.0 of the Spanish localized bits.ASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.6.2: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager the html generation has been optimized, the html page size is much smaller nowFacebook Graph Toolkit: Facebook Graph Toolkit 0.6: new Facebook Graph objects: Application, Page, Post, Comment Improved Intellisense documentation new Graph Api connections: albums, photos, posts, feed, home, friends JSON Toolkit upgraded to version 0.9 (beta release) with bug fixes and new features bug fixed: error when handling empty JSON arrays bug fixed: error when handling JSON array with square or large brackets in the message bug fixed: error when handling JSON obejcts with double quotation in the message bug fixed: erro...Microsoft All-In-One Code Framework: Visual Studio 2008 Code Samples 2011-01-23: Code samples for Visual Studio 2008MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (3): Instructions for installation: http://www.galasoft.ch/mvvm/installing/manually/ Includes the hotfix templates for Windows Phone 7 development. This is only relevant if you didn't already install the hotfix described at http://blog.galasoft.ch/archive/2010/07/22/mvvm-light-hotfix-for-windows-phone-7-developer-tools-beta.aspx.Community Forums NNTP bridge: Community Forums NNTP Bridge V42: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has added some features / bugfixes: Bugfix: Decoding of Subject now also supports multi-line subjects (occurs only if you have very long subjects with non-ASCII characters)Minecraft Tools: Minecraft Topographical Survey 1.3: MTS requires version 4 of the .NET Framework - you must download it from Microsoft if you have not previously installed it. This version of MTS adds automatic block list updates, so MTS will recognize blocks added in game updates properly rather than drawing them in bright pink. New in this version of MTS: Support for all new blocks added since the Halloween update Auto-update of blockcolors.xml to support future game updates A splash screen that shows while the program searches for upd...StyleCop for ReSharper: StyleCop for ReSharper 5.1.14996.000: New Features: ============= This release is just compiled against the latest release of JetBrains ReSharper 5.1.1766.4 Previous release: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes...New ProjectsAgilErp: AgilErp is a .NET OpenSource ERP - System developed in C# using WPF, WCF ,Entity Framework, MS-SQL-Server and MVVM. Angel Eye: 3d Game for the new generation AWWWE Browser: AWWWE Browser. (Pronounced "awe".) Aural World Wide Web Everywhere. 1) An aural browser. It talks and listens to you and you talk and listen to it. 2) A VUI for normal HTML web sites. It lets regular web sites talk and listen to you while you talk and listen to them.BitLocker Wrapper Library: The BDE Wrapper library allows .NET Developers to quickly use the WMI BitLocker provider without having to learn the complex methods and operation of the WMI classes.CRM8000: CRM8000????????????????DSM Hub for WP7: Implements a light version of the DSM tools for WP7. Currently, most of the effort is on the audio station.File Downloader: This application checks a Gmail account regularly for mail containing URLs. Once a URL is found, its content is downloaded and sent as a reply message with the file as an attachment. Intended usage: - Download IEEE articles as PDF when you're not in a authenticated network.Folder Space Quota: This component return Quotas Disk Space used for each folders and subfolders in a given directory. Results are returned with a graphic percent bar. Another Tab give access to this directory tree, indicating the size of each file and allows previewing them in a "LightBox" window. IDK: Every other month, IDK asks people to come up with awesome ideas for new programs and webpages. After the end of the month, IDKs developers have another month to create one of the top rated websites or applications. Got a great idea for a new app? Let IDK build it for you.Interop 2: Microformats for Azure Cloud with OData-InterfacejSPoint - JavaScript Library for SharePoint: JavaScript for SharePoint (jSPoint) is a library that help SharePoint developers to create rich,dynamic, & powerfull pages for SharePoint sites.MVVM T4: T4 Templates for generating view models, and views for WPF, Silverlight, Windows Phone using T4 Toolbox and MVVM LightNumericUpDown Control for WPF: A basic NumericUpDown Control for WPF that mirrors all the most used functions of the WinForms NumericUpDown Control and looks similar to itOData for IQToolkit: OData for IQToolkit, converts OData expressions into a usable expressions for IQToolkit providers.PLATO: PALTO is micro plate processing pipeline and supports enzymes and metabolites. PLATO was developed at INRA-Bordeaux and is an evolution of the EnzymeLaborTool developed at the Max-Planck Institute of Molecular Plant Physiology.Purdue CS 490: Model-based testing of ADO.NET: Five students from Purdue University will develop model-based tests for an aspect of ADO.NET during the Spring 2011 semester. We'll be using C# and Spec Explorer, among other tools.Replace in multiple Office 2010 documents: This program replaces a text string in multiple office 2010 documents (Word, Excel, PowerPoint). It is developed in VB.NET and new code for additional products is welcome. SearchEngine: A Website Search Engine and Crawler.Set Custom Currency Symbol: This utility enables you to set/register custom currency symbols for the .NET FrameworkSimple C# Email Templates: A really simple, really easy to use class for sending email templates. Reads any file from disk (think ".txt" or ".html") and matches custom tokens with the values you supply, in both the message body and the subject line. Supports multiple CC and BCC addresses.SimpleBasicAuthentication: SimpleBasicAuthentication makes it easier for developers to build a website with basic authentication using the credentials from just a text file. You'll no longer have to create new users on the system just to let them log in to the website or service. It's developed in C# 4.0.SpecsFor - Yet Another BDD Framework For .NET: SpecsFor is another Behavior-Driven Development framework that focuses on ease of use for *developers* by minimizing testing friction. Square: Custom SharePoint MyProfile PageSynchrolist workflow: Sharepoint workflow whitch perform automatic synchronisation between two lists in the same collection. Usefull for automatic translation.TFS Aggregator: This server side plugin for TFS 2010 enables dynamic calculation of field values in TFS. (For example: Dev work + Test Work = Total Work) Supports same work item and parent-child links. Also has support for aggregating string values (ie Children are Done so the parent is Done)Tinchant: My nice projectZebra_Image, a lightweight image manipulation library written in PHP: This is a compact (one-file only), lightweight, object-oriented image manipulation library written in and for PHP, that provides methods for performing several types of image manipulation operations. It doesn’t require any external libraries other than the GD2 extension.Zebra_Pagination, a generic pagination class written in PHP: A generic pagination class that automatically generates navigation links given the total number of items and the number of items per page.Zebra_Session, a wrapper for PHP’s default session handler, using MySQL: Zebra_Session is a PHP class that acts as a wrapper for PHP’s default session handling functions but instead of storing session data in flat files it stores them in a MySQL database, thus providing both better security and better performance.

    Read the article

  • Prefer extension methods for encapsulation and reusability?

    - by tzaman
    edit4: wikified, since this seems to have morphed more into a discussion than a specific question. In C++ programming, it's generally considered good practice to "prefer non-member non-friend functions" instead of instance methods. This has been recommended by Scott Meyers in this classic Dr. Dobbs article, and repeated by Herb Sutter and Andrei Alexandrescu in C++ Coding Standards (item 44); the general argument being that if a function can do its job solely by relying on the public interface exposed by the class, it actually increases encapsulation to have it be external. While this confuses the "packaging" of the class to some extent, the benefits are generally considered worth it. Now, ever since I've started programming in C#, I've had a feeling that here is the ultimate expression of the concept that they're trying to achieve with "non-member, non-friend functions that are part of a class interface". C# adds two crucial components to the mix - the first being interfaces, and the second extension methods: Interfaces allow a class to formally specify their public contract, the methods and properties that they're exposing to the world. Any other class can choose to implement the same interface and fulfill that same contract. Extension methods can be defined on an interface, providing any functionality that can be implemented via the interface to all implementers automatically. And best of all, because of the "instance syntax" sugar and IDE support, they can be called the same way as any other instance method, eliminating the cognitive overhead! So you get the encapsulation benefits of "non-member, non-friend" functions with the convenience of members. Seems like the best of both worlds to me; the .NET library itself providing a shining example in LINQ. However, everywhere I look I see people warning against extension method overuse; even the MSDN page itself states: In general, we recommend that you implement extension methods sparingly and only when you have to. (edit: Even in the current .NET library, I can see places where it would've been useful to have extensions instead of instance methods - for example, all of the utility functions of List<T> (Sort, BinarySearch, FindIndex, etc.) would be incredibly useful if they were lifted up to IList<T> - getting free bonus functionality like that adds a lot more benefit to implementing the interface.) So what's the verdict? Are extension methods the acme of encapsulation and code reuse, or am I just deluding myself? (edit2: In response to Tomas - while C# did start out with Java's (overly, imo) OO mentality, it seems to be embracing more multi-paradigm programming with every new release; the main thrust of this question is whether using extension methods to drive a style change (towards more generic / functional C#) is useful or worthwhile..) edit3: overridable extension methods The only real problem identified so far with this approach, is that you can't specialize extension methods if you need to. I've been thinking about the issue, and I think I've come up with a solution. Suppose I have an interface MyInterface, which I want to extend - I define my extension methods in a MyExtension static class, and pair it with another interface, call it MyExtensionOverrider. MyExtension methods are defined according to this pattern: public static int MyMethod(this MyInterface obj, int arg, bool attemptCast=true) { if (attemptCast && obj is MyExtensionOverrider) { return ((MyExtensionOverrider)obj).MyMethod(arg); } // regular implementation here } The override interface mirrors all of the methods defined in MyExtension, except without the this or attemptCast parameters: public interface MyExtensionOverrider { int MyMethod(int arg); string MyOtherMethod(); } Now, any class can implement the interface and get the default extension functionality: public class MyClass : MyInterface { ... } Anyone that wants to override it with specific implementations can additionally implement the override interface: public class MySpecializedClass : MyInterface, MyExtensionOverrider { public int MyMethod(int arg) { //specialized implementation for one method } public string MyOtherMethod() { // fallback to default for others MyExtension.MyOtherMethod(this, attemptCast: false); } } And there we go: extension methods provided on an interface, with the option of complete extensibility if needed. Fully general too, the interface itself doesn't need to know about the extension / override, and multiple extension / override pairs can be implemented without interfering with each other. I can see three problems with this approach - It's a little bit fragile - the extension methods and override interface have to be kept synchronized manually. It's a little bit ugly - implementing the override interface involves boilerplate for every function you don't want to specialize. It's a little bit slow - there's an extra bool comparison and cast attempt added to the mainline of every method. Still, all those notwithstanding, I think this is the best we can get until there's language support for interface functions. Thoughts?

    Read the article

  • Choosing a scripting language for game and implementing it

    - by Radius
    Hello, I am currently developing a 3D Action/RPG game in C++, and I would like some advice in choosing a scripting language to program the AI of the game. My team comes from a modding background, and in fact we are still finishing work on a mod of the game Gothic. In that game (which we also got our inspiration from) the language DAEDALUS (created by Piranha Bytes, the makers of the game) is used. Here is a full description of said language. The main thing to notice about this is that it uses instances moreso than classes. The game engine is closed, and so one can only guess about the internal implementation of this language, but the main thing I am looking for in a scripting language (which ideally would be quite similar but preferably also more powerful than DAEDALUS) is the fact that there are de facto 3 'separations' of classes - ie classes, instances and (instances of instances?). I think it will be easier to understand what I want if I provide an example. Take a regular NPC. First of all you have a class defined which (I understand) mirrors the (class or structure) inside the engine: CLASS C_NPC { VAR INT id ; // absolute ID des NPCs VAR STRING name [5] ; // Namen des NPC VAR STRING slot ; VAR INT npcType ; VAR INT flags ; VAR INT attribute [ATR_INDEX_MAX] ; VAR INT protection [PROT_INDEX_MAX]; VAR INT damage [DAM_INDEX_MAX] ; VAR INT damagetype ; VAR INT guild,level ; VAR FUNC mission [MAX_MISSIONS] ; var INT fight_tactic ; VAR INT weapon ; VAR INT voice ; VAR INT voicePitch ; VAR INT bodymass ; VAR FUNC daily_routine ; // Tagesablauf VAR FUNC start_aistate ; // Zustandsgesteuert // ********************** // Spawn // ********************** VAR STRING spawnPoint ; // Beim Tod, wo respawnen ? VAR INT spawnDelay ; // Mit Delay in (Echtzeit)-Sekunden // ********************** // SENSES // ********************** VAR INT senses ; // Sinne VAR INT senses_range ; // Reichweite der Sinne in cm // ********************** // Feel free to use // ********************** VAR INT aivar [50] ; VAR STRING wp ; // ********************** // Experience dependant // ********************** VAR INT exp ; // EXerience Points VAR INT exp_next ; // EXerience Points needed to advance to next level VAR INT lp ; // Learn Points }; Then, you can also define prototypes (which set some default values). But how you actually define an NPC is like this: instance BAU_900_Ricelord (Npc_Default) //Inherit from prototype Npc_Default { //-------- primary data -------- name = "Ryzowy Ksiaze"; npctype = NPCTYPE_GUARD; guild = GIL_BAU; level = 10; voice = 12; id = 900; //-------- abilities -------- attribute[ATR_STRENGTH] = 50; attribute[ATR_DEXTERITY] = 10; attribute[ATR_MANA_MAX] = 0; attribute[ATR_MANA] = 0; attribute[ATR_HITPOINTS_MAX]= 170; attribute[ATR_HITPOINTS] = 170; //-------- visuals -------- // animations Mdl_SetVisual (self,"HUMANS.MDS"); Mdl_ApplyOverlayMds (self,"Humans_Arrogance.mds"); Mdl_ApplyOverlayMds (self,"HUMANS_DZIDA.MDS"); // body mesh ,bdytex,skin,head mesh ,headtex,teethtex,ruestung Mdl_SetVisualBody (self,"Hum_Body_CookSmith",1,1,"Hum_Head_FatBald",91 , 0,-1); B_Scale (self); Mdl_SetModelFatness(self,2); fight_tactic = FAI_HUMAN_STRONG; //-------- Talente -------- Npc_SetTalentSkill (self,NPC_TALENT_1H,1); //-------- inventory -------- CreateInvItems (self, ItFoRice,10); CreateInvItem (self, ItFoWine); CreateInvItems(self, ItMiNugget,40); EquipItem (self, Heerscherstab); EquipItem (self, MOD_AMULETTDESREISLORDS); CreateInvItem (self, ItMi_Alchemy_Moleratlubric_01); //CreateInvItem (self,ItKey_RB_01); EquipItem (self, Ring_des_Lebens); //-------------Daily Routine------------- daily_routine = Rtn_start_900; }; FUNC VOID Rtn_start_900 () { TA_Boss (07,00,20,00,"NC_RICELORD"); TA_SitAround (20,00,24,00,"NC_RICELORD_SIT"); TA_Sleep (24,00,07,00,"NC_RICEBUNKER_10"); }; As you can see, the instance declaration is more like a constructor function, setting values and calling functions from within. This still wouldn't pose THAT much of a problem, if not for one more thing: multiple copies of this instance. For example, you can spawn multiple BAU_900_Ricelord's, and each of them keeps track of its own AI state, hitpoints etc. Now I think the instances are represented as ints (maybe even as the id of the NPC) inside the engine, as whenever (inside the script) you use the expression BAU_900_Ricelord it can be only assigned to an int variable, and most functions that operate on NPCs take that int value. However to directly modify its hitpoints etc you have to do something like var C_NPC npc = GetNPC(Bau_900_Ricelord); npc.attribute[ATR_HITPOINTS] = 10; ie get the actual C_NPC object that represents it. To finally recap - is it possible to get this kind of behaviour in any scripting languages you know of, or am I stuck with having to make my own? Or maybe there is an even better way of representing NPC's and their behaviours that way. The IDEAL language for scripting for me would be C#, as I simply adore that language, but somehow I doubt it is possible or indeed feasible to try and implement a similar kind of behaviour in C#. Many thanks

    Read the article

  • Cluster Node Recovery Using Second Node in Solaris Cluster

    - by Onur Bingul
    Assumptions:Node 0a is the cluster node that has crashed and could not boot anymore.Node 0b is the node in cluster and in production with services active.Both nodes have their boot disk mirrored via SDS/SVM.We have many options to clone the boot disk from node 0b:- make a copy via network using the ufsdump command and pipe to ufsrestore - make a copy inserting the disk locally on node 0b and creating the third mirror with SDS- make a copy inserting the disk locally on node 0b using dd commandIn this procedure we are going to use dd command (from my experience this is the best option).Bare in mind that in the examples provided we work on Sun Fire V240 systems which have SCSI internal disks. In the case of Fibre Channel (FC) internal disks you must pay attention to the unique identifier, or World Wide Name (WWN), associated with each FC disk (in this case take a look at infodoc #40133 in order to recreate the device tree correctly).Procedure:On node 0b the boot disk is c1t0d0 (c1t1d0 mirror) and this is the VTOC:* Partition  Tag  Flags    Sector     Count    Sector  Mount Directory      0      2    00          0   2106432   2106431      1      3    01    2106432  74630784  76737215      2      5    00          0 143349312 143349311      4      7    00   76737216  50340672 127077887      5      4    00  127077888  14683968 141761855      6      0    00  141761856   1058304 142820159      7      0    00  142820160    529152 143349311We will insert the new disk on node 0b and it will be seen as c1t2d0.1) On node 0b we make a copy via dd from disk c1t0d0s2 to disk c1t2d0s2# dd if=/dev/rdsk/c1t0d0s2 of=/dev/rdsk/c1t2d0s2 bs=8192kA copy of a 72GB disk will take approximately about 45 minutes.Note: as an alternative to make identical copy of root over network follow Document ID: 47498Title: Sun[TM] Cluster 3.0: How to Rebuild a node with Veritas Volume Manager2) Perform an fsck on disk c1t2d0 data slices:   1.  fsck -o f /dev/rdsk/c1t2d0s0 (root)   2.  fsck -o f /dev/rdsk/c1t2d0s4 (/var)   3.  fsck -o f /dev/rdsk/c1t2d0s5 (/usr)   4.  fsck -o f /dev/rdsk/c1t2d0s6 (/globaldevices)3) Mount the root file system in order to edit following files for changing the node name:# mount /dev/dsk/c1t2d0s0 /mntChange the hostname from 0b to 0a:# cd /mnt/etc# vi hosts # vi hostname.bge0 # vi hostname.bge2 # vi nodename 4) Change the /mnt/etc/vfstab from the actual:/dev/md/dsk/d201        -       -       swap    -       no      -/dev/md/dsk/d200        /dev/md/rdsk/d200       /       ufs     1       no      -/dev/md/dsk/d205        /dev/md/rdsk/d205       /usr    ufs     1       no      logging/dev/md/dsk/d204        /dev/md/rdsk/d204       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d206        /dev/md/rdsk/d206       /global/.devices/node@2 ufs     2       noglobalto this (unencapsulate disk from SDS/SVM):/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/dsk/c1t0d0s0       /dev/rdsk/c1t0d0s0       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs     2       no globalIt is important that global device partition (slice 6) in the new vfstab will point to the physical partition of the disk (in our case slice 6).Be careful with the name you use for the new disk. In this case we define it as c1t0d0 because we will insert it as target 0 in node 0a.But this could be different based on the configuration you are working on.5) Remove following entry from /mnt/etc/system (part of unencapsulation procedure):rootdev:/pseudo/md@0:0,200,blk6) Correct the link shared -> ../../global/.devices/node@2/dev/md/shared in order to point to the nodeid of node 0a (in our case nodeid 1):# cd /mnt/dev/mdhow it is now.... node 0b has nodeid 2lrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@2/dev/md/shared# rm shared# ln -s ../../global/.devices/node@1/dev/md/shared sharedhow is going to be... with nodeid 1 for node 0alrwxrwxrwx   1 root     root          42 Mar 10  2005 shared ->../../global/.devices/node@1/dev/md/shared7) Change nodeid (in our case from 2 to 1):# cd /mnt/etc/cluster# vi nodeid8) Change the file /mnt/etc/path_to_inst in order to reflect the correct nodeid for node 0a:# cd /mnt/etc# vi path_to_instChange entries from node@2 to node@1 with the vi command ":%s/node@2/node@1/g"9) Write the bootblock to the disk... just in case:# /usr/sbin/installboot /usr/platform/sun4u/lib/fs/ufs/bootblk /dev/rdsk/c1t2d0s0Now the disk is ready to be inserted in node 0a in order to bootup the node.10) Bootup node 0a with command "boot -sx"... this is becasue we need to make some changes in ccr files in order to recreate did environment.11) Modify cluster ccr:# cd /etc/cluster/ccr# rm did_instances# rm did_instances.bak# vi directory - remove the did_instances line.# /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/directory # grep ccr_gennum /etc/cluster/ccr/directory ccr_gennum -1 # /usr/cluster/lib/sc/ccradm -i /etc/cluster/ccr/infrastructure # grep ccr_gennum /etc/cluster/ccr/infrastructure ccr_gennum -112) Bring the node 0a down again to the ok prompt and then issue the command "boot -r"Now the node will join the cluster and from scstat and metaset command you can verify functionality. Next step is to encapsulate the boot disk in SDS/SVM and create the mirrors.In our case node 0b has metadevice name starting from d200. For this reason on node 0a we need to create metadevice starting from d100. This is just an example, you can have different names.The important thing to remember is that metadevice boot disks have different names on each node.13) Remove metadevice pointing to the boot and mirror disks (inherit from node 0b):# metaclear -r -f d200# metaclear -r -f d201# metaclear -r -f d204# metaclear -r -f d205# metaclear -r -f d206verify from metastat that no metadevices are set for boot and mirror disks.14) Encapsulate the boot disk:# metainit -f d110 1 1 c1t0d0s0# metainit d100 -m d110# metaroot d10015) Reboot node 0a.16) Create all the metadevice for slices remaining on boot disk# metainit -f d111 1 1 c1t0d0s1# metainit d101 -m d111# metainit -f d114 1 1 c1t0d0s4# metainit d104 -m d114# metainit -f d115 1 1 c1t0d0s5# metainit d105 -m d115# metainit -f d116 1 1 c1t0d0s6# metainit d106 -m d11617) Edit the vfstab in order to specifiy metadevices created:old:/dev/dsk/c1t0d0s1        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/dsk/c1t0d0s5       /dev/rdsk/c1t0d0s5       /usr    ufs     1       no      logging/dev/dsk/c1t0d0s4       /dev/rdsk/c1t0d0s4       /var    ufs     1       no      logging#/dev/md/dsk/d206       /dev/md/rdsk/d206       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/dsk/c1t0d0s6       /dev/rdsk/c1t0d0s6       /global/.devices/node@1 ufs      2       no  globalnew:/dev/md/dsk/d101        -       -       swap    -       no      -/dev/md/dsk/d100        /dev/md/rdsk/d100       /       ufs     1       no      -/dev/md/dsk/d105        /dev/md/rdsk/d105       /usr    ufs     1       no      logging/dev/md/dsk/d104        /dev/md/rdsk/d104       /var    ufs     1       no      logging#/dev/md/dsk/106       /dev/md/rdsk/d106       /globaldevices  ufs     2       yes     loggingswap    -       /tmp    tmpfs   -       yes     -/dev/md/dsk/d106        /dev/md/rdsk/d106       /global/.devices/node@1 ufs     2       noglobal18) Reboot node 0a in order to check new SDS/SVM boot configuration.19) Label the mirror disk c1t1d0 with the VTOC of boot disk c1t0d0:# prtvtoc /dev/dsk/c1t0d0s2 > /var/tmp/VTOC_c1t0d0 # fmthard -s /var/tmp/VTOC_c1t0d0 /dev/rdsk/c1t1d0s220) Put DB replica on slice 7 of disk c1t1d0:# metadb -a -c 3 /dev/dsk/c1t1d0s721) Create metadevice for mirror disk c1t1d0 and attach the new mirror side:# metainit d120 1 1 c1t1d0s0# metattach d100 d120# metainit d121 1 1 c1t1d0s1# metattach d101 d121# metainit d124 1 1 c1t1d0s4# metattach d104 d124# metainit d125 1 1 c1t1d0s5# metattach d105 d125# metainit d126 1 1 c1t1d0s6# metattach d106 d126

    Read the article

  • LSI 9285-8e and Supermicro SC837E26-RJBOD1 duplicate enclosure ID and slot numbers

    - by Andy Shinn
    I am working with 2 x Supermicro SC837E26-RJBOD1 chassis connected to a single LSI 9285-8e card in a Supermicro 1U host. There are 28 drives in each chassis for a total of 56 drives in 28 RAID1 mirrors. The problem I am running in to is that there are duplicate slots for the 2 chassis (the slots list twice and only go from 0 to 27). All the drives also show the same enclosure ID (ID 36). However, MegaCLI -encinfo lists the 2 enclosures correctly (ID 36 and ID 65). My question is, why would this happen? Is there an option I am missing to use 2 enclosures effectively? This is blocking me rebuilding a drive that failed in slot 11 since I can only specify enclosure and slot as parameters to replace a drive. When I do this, it picks the wrong slot 11 (device ID 46 instead of device ID 19). Adapter #1 is the LSI 9285-8e, adapter #0 (which I removed due to space limitations) is the onboard LSI. Adapter information: Adapter #1 ============================================================================== Versions ================ Product Name : LSI MegaRAID SAS 9285-8e Serial No : SV12704804 FW Package Build: 23.1.1-0004 Mfg. Data ================ Mfg. Date : 06/30/11 Rework Date : 00/00/00 Revision No : 00A Battery FRU : N/A Image Versions in Flash: ================ BIOS Version : 5.25.00_4.11.05.00_0x05040000 WebBIOS Version : 6.1-20-e_20-Rel Preboot CLI Version: 05.01-04:#%00001 FW Version : 3.140.15-1320 NVDATA Version : 2.1106.03-0051 Boot Block Version : 2.04.00.00-0001 BOOT Version : 06.253.57.219 Pending Images in Flash ================ None PCI Info ================ Vendor Id : 1000 Device Id : 005b SubVendorId : 1000 SubDeviceId : 9285 Host Interface : PCIE ChipRevision : B0 Number of Frontend Port: 0 Device Interface : PCIE Number of Backend Port: 8 Port : Address 0 5003048000ee8e7f 1 5003048000ee8a7f 2 0000000000000000 3 0000000000000000 4 0000000000000000 5 0000000000000000 6 0000000000000000 7 0000000000000000 HW Configuration ================ SAS Address : 500605b0038f9210 BBU : Present Alarm : Present NVRAM : Present Serial Debugger : Present Memory : Present Flash : Present Memory Size : 1024MB TPM : Absent On board Expander: Absent Upgrade Key : Absent Temperature sensor for ROC : Present Temperature sensor for controller : Absent ROC temperature : 70 degree Celcius Settings ================ Current Time : 18:24:36 3/13, 2012 Predictive Fail Poll Interval : 300sec Interrupt Throttle Active Count : 16 Interrupt Throttle Completion : 50us Rebuild Rate : 30% PR Rate : 30% BGI Rate : 30% Check Consistency Rate : 30% Reconstruction Rate : 30% Cache Flush Interval : 4s Max Drives to Spinup at One Time : 2 Delay Among Spinup Groups : 12s Physical Drive Coercion Mode : Disabled Cluster Mode : Disabled Alarm : Enabled Auto Rebuild : Enabled Battery Warning : Enabled Ecc Bucket Size : 15 Ecc Bucket Leak Rate : 1440 Minutes Restore HotSpare on Insertion : Disabled Expose Enclosure Devices : Enabled Maintain PD Fail History : Enabled Host Request Reordering : Enabled Auto Detect BackPlane Enabled : SGPIO/i2c SEP Load Balance Mode : Auto Use FDE Only : No Security Key Assigned : No Security Key Failed : No Security Key Not Backedup : No Default LD PowerSave Policy : Controller Defined Maximum number of direct attached drives to spin up in 1 min : 10 Any Offline VD Cache Preserved : No Allow Boot with Preserved Cache : No Disable Online Controller Reset : No PFK in NVRAM : No Use disk activity for locate : No Capabilities ================ RAID Level Supported : RAID0, RAID1, RAID5, RAID6, RAID00, RAID10, RAID50, RAID60, PRL 11, PRL 11 with spanning, SRL 3 supported, PRL11-RLQ0 DDF layout with no span, PRL11-RLQ0 DDF layout with span Supported Drives : SAS, SATA Allowed Mixing: Mix in Enclosure Allowed Mix of SAS/SATA of HDD type in VD Allowed Status ================ ECC Bucket Count : 0 Limitations ================ Max Arms Per VD : 32 Max Spans Per VD : 8 Max Arrays : 128 Max Number of VDs : 64 Max Parallel Commands : 1008 Max SGE Count : 60 Max Data Transfer Size : 8192 sectors Max Strips PerIO : 42 Max LD per array : 16 Min Strip Size : 8 KB Max Strip Size : 1.0 MB Max Configurable CacheCade Size: 0 GB Current Size of CacheCade : 0 GB Current Size of FW Cache : 887 MB Device Present ================ Virtual Drives : 28 Degraded : 0 Offline : 0 Physical Devices : 59 Disks : 56 Critical Disks : 0 Failed Disks : 0 Supported Adapter Operations ================ Rebuild Rate : Yes CC Rate : Yes BGI Rate : Yes Reconstruct Rate : Yes Patrol Read Rate : Yes Alarm Control : Yes Cluster Support : No BBU : No Spanning : Yes Dedicated Hot Spare : Yes Revertible Hot Spares : Yes Foreign Config Import : Yes Self Diagnostic : Yes Allow Mixed Redundancy on Array : No Global Hot Spares : Yes Deny SCSI Passthrough : No Deny SMP Passthrough : No Deny STP Passthrough : No Support Security : No Snapshot Enabled : No Support the OCE without adding drives : Yes Support PFK : Yes Support PI : No Support Boot Time PFK Change : Yes Disable Online PFK Change : No PFK TrailTime Remaining : 0 days 0 hours Support Shield State : Yes Block SSD Write Disk Cache Change: Yes Supported VD Operations ================ Read Policy : Yes Write Policy : Yes IO Policy : Yes Access Policy : Yes Disk Cache Policy : Yes Reconstruction : Yes Deny Locate : No Deny CC : No Allow Ctrl Encryption: No Enable LDBBM : No Support Breakmirror : No Power Savings : Yes Supported PD Operations ================ Force Online : Yes Force Offline : Yes Force Rebuild : Yes Deny Force Failed : No Deny Force Good/Bad : No Deny Missing Replace : No Deny Clear : No Deny Locate : No Support Temperature : Yes Disable Copyback : No Enable JBOD : No Enable Copyback on SMART : No Enable Copyback to SSD on SMART Error : Yes Enable SSD Patrol Read : No PR Correct Unconfigured Areas : Yes Enable Spin Down of UnConfigured Drives : Yes Disable Spin Down of hot spares : No Spin Down time : 30 T10 Power State : Yes Error Counters ================ Memory Correctable Errors : 0 Memory Uncorrectable Errors : 0 Cluster Information ================ Cluster Permitted : No Cluster Active : No Default Settings ================ Phy Polarity : 0 Phy PolaritySplit : 0 Background Rate : 30 Strip Size : 64kB Flush Time : 4 seconds Write Policy : WB Read Policy : Adaptive Cache When BBU Bad : Disabled Cached IO : No SMART Mode : Mode 6 Alarm Disable : Yes Coercion Mode : None ZCR Config : Unknown Dirty LED Shows Drive Activity : No BIOS Continue on Error : No Spin Down Mode : None Allowed Device Type : SAS/SATA Mix Allow Mix in Enclosure : Yes Allow HDD SAS/SATA Mix in VD : Yes Allow SSD SAS/SATA Mix in VD : No Allow HDD/SSD Mix in VD : No Allow SATA in Cluster : No Max Chained Enclosures : 16 Disable Ctrl-R : Yes Enable Web BIOS : Yes Direct PD Mapping : No BIOS Enumerate VDs : Yes Restore Hot Spare on Insertion : No Expose Enclosure Devices : Yes Maintain PD Fail History : Yes Disable Puncturing : No Zero Based Enclosure Enumeration : No PreBoot CLI Enabled : Yes LED Show Drive Activity : Yes Cluster Disable : Yes SAS Disable : No Auto Detect BackPlane Enable : SGPIO/i2c SEP Use FDE Only : No Enable Led Header : No Delay during POST : 0 EnableCrashDump : No Disable Online Controller Reset : No EnableLDBBM : No Un-Certified Hard Disk Drives : Allow Treat Single span R1E as R10 : No Max LD per array : 16 Power Saving option : Don't Auto spin down Configured Drives Max power savings option is not allowed for LDs. Only T10 power conditions are to be used. Default spin down time in minutes: 30 Enable JBOD : No TTY Log In Flash : No Auto Enhanced Import : No BreakMirror RAID Support : No Disable Join Mirror : No Enable Shield State : Yes Time taken to detect CME : 60s Exit Code: 0x00 Enclosure information: # /opt/MegaRAID/MegaCli/MegaCli64 -encinfo -a1 Number of enclosures on adapter 1 -- 3 Enclosure 0: Device ID : 36 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port B Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 65 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11820 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 48 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 1: Device ID : 65 Number of Slots : 28 Number of Power Supplies : 2 Number of Fans : 3 Number of Temperature Sensors : 1 Number of Alarms : 1 Number of SIM Modules : 0 Number of Physical Drives : 28 Status : Normal Position : 1 Connector Name : Port A Enclosure type : SES VendorId is LSI CORP and Product Id is SAS2X36 VendorID and Product ID didnt match FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : 36 Inquiry data : Vendor Identification : LSI CORP Product Identification : SAS2X36 Product Revision Level : 0718 Vendor Specific : x36-55.7.24.1 Number of Voltage Sensors :2 Voltage Sensor :0 Voltage Sensor Status :OK Voltage Value :5020 milli volts Voltage Sensor :1 Voltage Sensor Status :OK Voltage Value :11760 milli volts Number of Power Supplies : 2 Power Supply : 0 Power Supply Status : OK Power Supply : 1 Power Supply Status : OK Number of Fans : 3 Fan : 0 Fan Speed :Low Speed Fan Status : OK Fan : 1 Fan Speed :Low Speed Fan Status : OK Fan : 2 Fan Speed :Low Speed Fan Status : OK Number of Temperature Sensors : 1 Temp Sensor : 0 Temperature : 47 Temperature Sensor Status : OK Number of Chassis : 1 Chassis : 0 Chassis Status : OK Enclosure 2: Device ID : 252 Number of Slots : 8 Number of Power Supplies : 0 Number of Fans : 0 Number of Temperature Sensors : 0 Number of Alarms : 0 Number of SIM Modules : 1 Number of Physical Drives : 0 Status : Normal Position : 1 Connector Name : Unavailable Enclosure type : SGPIO Failed in first Inquiry commnad FRU Part Number : N/A Enclosure Serial Number : N/A ESM Serial Number : N/A Enclosure Zoning Mode : N/A Partner Device Id : Unavailable Inquiry data : Vendor Identification : LSI Product Identification : SGPIO Product Revision Level : N/A Vendor Specific : Exit Code: 0x00 Now, notice that each slot 11 device shows an enclosure ID of 36, I think this is where the discrepancy happens. One should be 36. But the other should be on enclosure 65. Drives in slot 11: Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 5, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 48 WWN: Sequence Number: 11 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : YES Device Firmware Level: A5C0 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8a53 Connected Port Number: 1(path0) Inquiry Data: MJ1311YNG6YYXAHitachi HDS5C3030ALA630 MEAOA5C0 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Enclosure Device ID: 36 Slot Number: 11 Drive's postion: DiskGroup: 19, Span: 0, Arm: 1 Enclosure position: 0 Device Id: 19 WWN: Sequence Number: 4 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SATA Raw Size: 2.728 TB [0x15d50a3b0 Sectors] Non Coerced Size: 2.728 TB [0x15d40a3b0 Sectors] Coerced Size: 2.728 TB [0x15d400000 Sectors] Firmware state: Online, Spun Up Is Commissioned Spare : NO Device Firmware Level: A580 Shield Counter: 0 Successful diagnostics completion on : N/A SAS Address(0): 0x5003048000ee8e53 Connected Port Number: 0(path0) Inquiry Data: MJ1313YNG1VA5CHitachi HDS5C3030ALA630 MEAOA580 FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: None Device Speed: 6.0Gb/s Link Speed: 6.0Gb/s Media Type: Hard Disk Device Drive Temperature :30C (86.00 F) PI Eligibility: No Drive is formatted for PI information: No PI: No PI Drive's write cache : Disabled Drive's NCQ setting : Enabled Port-0 : Port status: Active Port's Linkspeed: 6.0Gb/s Drive has flagged a S.M.A.R.T alert : No Update 06/28/12: I finally have some new information about (what we think) the root cause of this problem so I thought I would share. After getting in contact with a very knowledgeable Supermicro tech, they provided us with a tool called Xflash (doesn't appear to be readily available on their FTP). When we gathered some information using this utility, my colleague found something very strange: root@mogile2 test]# ./xflash.dat -i get avail Initializing Interface. Expander: SAS2X36 (SAS2x36) 1) SAS2X36 (SAS2x36) (50030480:00EE917F) (0.0.0.0) 2) SAS2X36 (SAS2x36) (50030480:00E9D67F) (0.0.0.0) 3) SAS2X36 (SAS2x36) (50030480:0112D97F) (0.0.0.0) This lists the connected enclosures. You see the 3 connected (we have since added a 3rd and a 4th which is not yet showing up) with their respective SAS address / WWN (50030480:00EE917F). Now we can use this address to get information on the individual enclosures: [root@mogile2 test]# ./xflash.dat -i 5003048000EE917F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00EE917F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 5003048000E9D67F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:00E9D67F Enclosure Logical Id: 50030480:0000007F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 [root@mogile2 test]# ./xflash.dat -i 500304800112D97F get exp Initializing Interface. Expander: SAS2X36 (SAS2x36) Reading the expander information.......... Expander: SAS2X36 (SAS2x36) B3 SAS Address: 50030480:0112D97F Enclosure Logical Id: 50030480:0112D97F IP Address: 0.0.0.0 Component Identifier: 0x0223 Component Revision: 0x05 Did you catch it? The first 2 enclosures logical ID is partially masked out where the 3rd one (which has a correct unique enclosure ID) is not. We pointed this out to Supermicro and were able to confirm that this address is supposed to be set during manufacturing and there was a problem with a certain batch of these enclosures where the logical ID was not set. We believe that the RAID controller is determining the ID based on the logical ID and since our first 2 enclosures have the same logical ID, they get the same enclosure ID. We also confirmed that 0000007F is the default which comes from LSI as an ID. The next pointer that helps confirm this could be a manufacturing problem with a run of JBODs is the fact that all 6 of the enclosures that have this problem begin with 00E. I believe that between 00E8 and 00EE Supermicro forgot to program the logical IDs correctly and neglected to recall or fix the problem post production. Fortunately for us, there is a tool to manage the WWN and logical ID of the devices from Supermicro: ftp://ftp.supermicro.com/utility/ExpanderXtools_Lite/. Our next step is to schedule a shutdown of these JBODs (after data migration) and reprogram the logical ID and see if it solves the problem. Update 06/28/12 #2: I just discovered this FAQ at Supermicro while Google searching for "lsi 0000007f": http://www.supermicro.com/support/faqs/faq.cfm?faq=11805. I still don't understand why, in the last several times we contacted Supermicro, they would have never directed us to this article :\

    Read the article

  • You Might Be a DBA

    - by BuckWoody
    With all apologies to Jeff Foxworthy, I was up late Friday night on a holiday weekend (which translated into T-SQL becomes “Maintenance Window”) and I got bored in between the two or three minutes I had between clicks. So I started a “Twitter” meme – and it just took off. I haven’t cleaned these up much, but here, in author order as of Saturday the 29th of May is the list “You might be a DBA” from around the Twitterverse: buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have children older than the rest of your team #youmightbeaDBA  buckwoody You and the Oracle DBA would kill each other, but you'll happily fight off a developer together first #youmightbeaDBA  buckwoody You've threatened to quit if they give anyone the sa password on production #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You've sent a vendor suggestions on improving their database design or code (and been ignored) #youmightbeaDBA  buckwoody You have an opinion on the best code-beautifier #youmightbeaDBA  buckwoody You have at least one set of scripts you won't share #youmightbeaDBA  buckwoody You refer to co-workers as "carbon-units" #youmightbeaDBA  buckwoody Being paranoid is on your resume at the top #youmightbeaDBA  buckwoody Everyone comes to your cube to find the MSDN DVD's #youmightbeaDBA  buckwoody You always plan an exit strategy, even when entering a McDonald's #youmightbeaDBA  buckwoody You've worn down developers to get your way by explaining normalization levels #youmightbeaDBA  buckwoody You refer to clothes as "Data Abstractions" #youmightbeaDBA  buckwoody Users pester you to be able to put data in a database, then they pester you to take it out and put it in Excel #youmightbeaDBA  buckwoody Others try to de-duplicate data, you try to copy it to more than three locations #youmightbeaDBA  buckwoody You have at least one DLT tape in the trunk of your car #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody Your spouse knows what "ETL" means #youmightbeaDBA  buckwoody You've referred to yourself as the "Data Janitor" #youmightbeaDBA  buckwoody You don't have positive connotations of the word "upgrade" #youmightbeaDBA  buckwoody You get your coffee before you check your servers, because you know you won't get any if you don't #youmightbeaDBA  buckwoody You always come to work through the back door so no one hijacks you on the way to your cube #youmightbeaDBA  buckwoody You check your server logs before you check your e-mail in the morning so you can reply "Yeah, I already fixed that." #youmightbeaDBA  buckwoody You have more conference badges than clean socks #youmightbeaDBA  buckwoody Your coffee mug says "It depends" #youmightbeaDBA  buckwoody You can convince a boss that you need 16GB of RAM in your laptop #youmightbeaDBA  buckwoody You've used ebay to find production equipment #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You know when your company is acquiring another even before the CFO #youmightbeaDBA  buckwoody You pad all project timelines by 2X, and you still miss them #youmightbeaDBA  buckwoody You call aspirin "work vitamins" #youmightbeaDBA  buckwoody You get the same amount of sleep even after you have a child #youmightbeaDBA  buckwoody You obsess about performance metrics from over one year ago #youmightbeaDBA  buckwoody The first thing you buy after the database software is aftermarket tools to manage the database software #youmightbeaDBA  buckwoody You've tried to convince someone else to become a DBA #youmightbeaDBA  buckwoody You use twitter and facebook to talk with colleagues because there's no one else in your company that does what you do #youmightbeaDBA  buckwoody You only know other DBA's by their Tweet Handle #youmightbeaDBA  buckwoody You've explained the difference between 32 and 64-bit to more than one manager in terms they can understand, using puppets #youmightbeaDBA  buckwoody Your two main enemies are developers and SAN admins #youmightbeaDBA  buckwoody You've driven to the Datacenter to install SQL Server because "you don't trust those NOC admins" #youmightbeaDBA  buckwoody You pay more for faster Internet connections than cable at home so you don't have to drive in #youmightbeaDBA  buckwoody You call texting a "queuing system" #youmightbeaDBA  buckwoody You know that if someone can read Perl, they manage an Oracle system #youmightbeaDBA  buckwoody You have an e-mail rule for backup notifications #youmightbeaDBA  buckwoody Your food pyramid includes coffee, salt and fat #youmightbeaDBA  buckwoody You wish everything had a graphical query plan #youmightbeaDBA  buckwoody You refactor your e-mails #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody You've written blog posts on technology you've never actually implemented in production #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody @MidnightDBA Click the #youmightbeaDBA tag. I've had WAY too much coffee today.  buckwoody There is no other position that is 1-deep except you and the CEO #youmightbeaDBA  buckwoody When you watch "The Office" you call it "OJT" #youmightbeaDBA  buckwoody You would pay money for a license plate that has the letters S-Q-L together #youmightbeaDBA  buckwoody Your blog would make a "best practices" or "worst practices" book #youmightbeaDBA  buckwoody You have actually considered making a RAID array from thumb drives #youmightbeaDBA  buckwoody The first thing you install on your netbook is SSMS #youmightbeaDBA  buckwoody Everything on your laptop is installed from your MSDN subscription #youmightbeaDBA  buckwoody Your watch is set to UTC because it's just easier #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody * == bad #youmightbeaDBA  buckwoody There are just as many females in your technical field as males #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody You refer to time as a "Clustered Index" #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You make plenty of money, but you're excited to get a $2.00 squeeze-ball from Quest and Redgate #youmightbeaDBA  buckwoody You can't explain to your family what you really do for a living #youmightbeaDBA  buckwoody You tell people that you made a database query go faster, and expect them to be happy for you #youmightbeaDBA  buckwoody You think a millisecond is a really long time #youmightbeaDBA  buckwoody You're sitting and typing #youmightbeaDBA when you could be outside #youmightbeaDBA  buckwoody You can't wait for a technical conference so you can wear a kilt - and you're not Scottish #youmightbeaDBA  buckwoody You know that "DBA" stands for "Default Blame Acceptor" #youmightbeaDBA  buckwoody People can use Access as a cross or garlic on you #youmightbeaDBA  buckwoody You know what "the truth, thole truth and nothing but the truth, so help me Codd" means #youmightbeaDBA  buckwoody You've gotten more help from twitter and facebook than all your years in college #youmightbeaDBA  buckwoody You can't talk fast enough to get a concept out of your head so you tweet it instead #youmightbeaDBA  buckwoody You cry when someone doesn't use a WHERE clause #youmightbeaDBA  buckwoody You think data can be represented as something OTHER than XML #youmightbeaDBA  buckwoody You think "Set theory" is not an verb but a noun #youmightbeaDBA  buckwoody You try to convince random strangers to vote on your Connect item #youmightbeaDBA  buckwoody You think 3 hours of contiguous sleep is a good thing #youmightbeaDBA or #youmightbeamother  buckwoody You don't like Oracle, and not just because of what she did to Neo #youmightbeaDBA  buckwoody You know when to say "sequel" and "s-q-l" #youmightbeaDBA  buckwoody You know where the data is #youmightbeaDBA  buckwoody You refer to your children as "Fully Redundant Mirrors" #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody Your laptop is more powerful than the servers in most companies - including your own #youmightbeaDBA  buckwoody You capitalize SELECTed words #youmightbeaDBA  buckwoody You take the word "NoSQL" as a personal attack #youmightbeaDBA  buckwoody You know why "user" refers to both business people and crack addicts #youmightbeaDBA  buckwoody You cringe in public when the word "upgrade" is used in a sentence #youmightbeaDBA  buckwoody Holiday == "Maintenance Window" #youmightbeaDBA  buckwoody All Data Is MetaData means something to you #youmightbeaDBA  buckwoody You've never seen the driveway to your house in the daylight #youmightbeaDBA  buckwoody You think that something OTHER than the database might be the performance bottleneck #youmightbeaDBA  buckwoody Most of your bloodstream is composed of caffeine #youmightbeaDBA  buckwoody Your task list is labeled "CRUD Matrix" #youmightbeaDBA  buckwoody You call your wife/husband a "Linked Server" #youmightbeaDBA  anonythemouse When someone tells you they are going to take a dump and you wonder of which database then #youmightbeaDBA  anonythemouse When it's 11pm on a holiday weekend and you are working #youmightbeaDBA  anonythemouse When you sit down at a table and look for it's primary key #youmightbeaDBA  anonythemouse When getting milk from the fridge you check the expiry date is > getdate() #youmightbeaDBA  blakmk when you wake up dreaming about sql #youmightbeaDBA  CharlesGarver You think a @buckwoody bobblehead would be a cool thing to have on the dashboard of your car #youmightbeaDBA  CharlesGarver Your friends don't understand why you think there's a difference between single and double quotes #youmightbeaDBA  CharlesGarver Even the newest employees know your name from all the downtime notices you've sent out #youmightbeaDBA  CharlesGarver You sometimes feel anxious and think "I should test restoring those backups" and then the feeling passes #youmightbeadba  CharlesGarver You know what a co-worker means when they ask "how is your squirrel server?" #youmightbeadba  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver You're willing to move someone's job up in priority for a box of #voodoodonuts #youmightbeaDBA  CharlesGarver Each person in your company seems to think you work for THEM #youmightbeaDBA  CharlesGarver You have a Love/Hate relationship going on with #Microsoft #youmightbeaDBA  CharlesGarver People ask you to troubleshoot their Access program #youmightbeaDBA  CharlesGarver The first words you hear in the morning are 'your voicemail box is full' #youmightbeaDBA  CharlesGarver The thought of disrupting 500 people's work so you can do something doesn't phase you #youmightbeaDBA  CharlesGarver You can't sleep at night and you ponder the logisitcs of collecting every copy of Access for the world's biggest bonfire #youmightbeaDBA  CharlesGarver Your home computer is backed up in 3 different places #youmightbeaDBA  CharlesGarver Your wardrobe for work includes pajamas #youmightbeaDBA  CharlesGarver Someone tells you to look in the INDEX and you look puzzled before finally going to the back of the book. #youmightbeaDBA  chuckboycejr If you have ever set up a SQLAgent job to email your mobile phone to serve as an alarm clock #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd rather meet Itzik than Jay Z #youmightbeaDBA  chuckboycejr If you'd wrestle a SysAdmin to the ground to implement #DPA best practices as per @aspiringgeek #youmightbeaDBA  databaseguy I need to be up in 7 hours, so I'm off to bed! I'll have to read the rest of @buckwoody's #youmightbeaDBA posts in the AM. (g'night Buck!)  databaseguy When people ask you about your house, the first thing you describe is the network. #youmightbeaDBA  databaseguy The last thing you say at the office each day is, "is anybody else here? I'm shutting off the lights!" #youmightbeaDBA  databaseguy Your blood pressure rises when you read application specs drafted by marketing. #youmightbeaDBA  databaseguy A good day at work is one when nobody pays you no mind. #youmightbeaDBA  databaseguy You care about latches and wait states. #youmightbeaDBA  databaseguy You have worked over 200 hours on a performance tuning project that required no application changes at all. #youmightbeaDBA  databaseguy The late-night security guard knows the names of your spouse and kids. #youmightbeaDBA  databaseguy You have had vigorous debates about whether it should be pronounced "sequel" or "ess-queue-ell". #youmightbeaDBA  databaseguy You have VPN and RDP software installed on your phone ... just in case. #youmightbeaDBA  databaseguy You have edited a data file by hand, just to see what would happen. #youmightbeaDBA  databaseguy You decorate your office walls with database catalog posters. #youmightbeaDBA  databaseguy You've built programs that access data just to keep other developers from asking you to run queries all the time. #youmightbeaDBA  databaseguy When you watch movies like The Matrix, you find yourself calculating the fasibility of storing all that data. #youmightbeaDBA  databaseguy You have tried to convince someone to spend money on an SSD storage array. #youmightbeaDBA  databaseguy When CPU is spiked on a server, you want to gather forensic evidence. #youmightbeaDBA  databaseguy You have to remind developers not to push code to production without checking if the database is ready. #youmightbeaDBA  databaseguy Nobody cares what you wear to work, as long as the thing keeps running. #youmightbeaDBA  databaseguy Telepathy is a job requirement when working with app dev teams. #youmightbeaDBA  databaseguy You read database statistics for the educational value. #youmightbeaDBA  databaseguy And your boss freely admits this to anyone within earshot. #youmightbeaDBA  databaseguy Your boss cannot explain or understand what you do. #youmightbeaDBA  databaseguy You envision ERDs when you see a GUI. #youmightbeaDBA  databaseguy You say things like "applications come and go, but data lasts forever." #youmightbeaDBA  databaseguy You have memorized the names of several of the AdventureWorks employees. #youmightbeaDBA  databaseguy You know what MAXDOP setting you can get away with for a big query based on current server load. #youmightbeaDBA  databaseguy And you immediately recognize the recursion in my last tweet. #youmightbeaDBA  databaseguy You find 50 simultaneous tweets from @buckwoody about #youmightbeaDBA :O)  DBAishness You have "funny stories" about the times your developers accidentally deleted the T-log in their test environment. #youmightbeaDBA  DBAishness Planning to slice and dice your MDW data with PowerPivot makes you giggle like a schoolgirl. #youmightbeaDBA  donalddotfarmer You think @buckwoody lives in the "real world." #youmightbeaDBA  jamach09 @buckwoody #youmightbeaDBA Why go outside when you can sit in the nice cool server room?  jamach09 If you refer to procreation as "Replication", #youmightbeaDBA.  jamach09 If you think ORM is a four-letter word, #youmightbeaDBA  JamesMarsh If you have ever preached the value of Source Code Control, #YouMightBeADBA  jethrocarr @venzann You store your shopping list in a ACID compliant DB #youmightbeaDBA  joe_positive @buckwoody thought it stood for "Don't Bother Asking" #youmightbeaDBA  joe_positive when you check your IT Events Calendar before making weekend plans #youmightbeaDBA  LadyRuna You cringe whenever someone calls Excel a database #youmightbeaDBA  LadyRuna When the waiter says he'll be your server today, you ask how many terabytes he is #youmightbeaDBA  LadyRuna you always call the asterisk a "Star" #youmightbeaDBA  LadyRuna You walk into a server room, say "Nice RACK!" and everyone there knows you're talking about server rack... #youmightbeaDBA  LadyRuna You receive more messages from servers than from friends #youmightbeaDBA  LadyRuna hmmm... #youmightbeaDBA if your recipe for gumbo is "SELECT * FROM Refrigerator"  markjholmes @SQLSoldier Heh. #youmightbeaDBA if you correct other DBAs' spelling of @PaulRandal  markjholmes #youmightbeaDBA if you actually test RAID5 vs RAID10 on your SAN because when it comes to configuration, "it depends."  markjholmes #youmightbeaDBA if you have at least 3 definitions of the word "cluster"  MarlonRibunal 3 Words: @BrentO, snicker, & Access #youmightbeaDBA  MarlonRibunal @onpnt @mikeSQL my appeal was a couple of mins late. Enjoying #youmightbeaDBA  MarlonRibunal @mikeSQL @onpnt pls, don't mention bacon #youmightbeaDBA  merv @buckwoody You HATE 3-way joins #youmightbeaDBA  MidnightDBA If you're up at midnight Tweeting about SQL #youmightbeaDBA  MidnightDBA @buckwoody I'd noticed that. :) #youmightbeaDBA  mikeSQL when people talk about "their type" you're thinking varchar, bigint, binary, etc #youmightbeadba  mikeSQL people ask you to go to lunch , but you can't go because you're attending #SQLlunch #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mikeSQL you laugh for hours at all of the #sqlmoviequotes ....things in which a normal individual would scratch their head at. #youmightbeadba  mrdenny If you think that @buckwoody's demo using PowerPivot to analyze index usage data from DMVs is awesome then #youmightbeaDBA  mrdenny You wish @PaulRandal still worked at Microsoft so that they would make a bobble head of him #youmightbeadba  mrdenny When it's 11pm on a holiday weekend, and your posting stupid jokes on Twitter then #youmightbeadba  mrdenny If you go out with friends and wonder why no one's wearing a kilt then #YouMightBeADBA  mrdenny You can't do basic math, but you know off the top of your head how many CALs $14,412 can buy you. #YoumightbeaDBA  mrdenny If you've ever setup a SQL Job to email you to get you out of a regularly scheduled meeting #YouMightBeADBA.  mrdenny You throw up in your mouth a little when ever you here the word "Access". Even if it doesn't relate to a MS product. #YouMightBeADBA  msdtjones You spend more time listening to @buckwoody than your wife #youmightbeaDBA  NFDotCom You perform "hail deltas" on a regular basis. #YouMightBeADBA  NoelMcKinney If you tell your wife you want to go to Columbus Ohio for your wedding anniversary so you can attend #sqlsat42 then #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney You read a union is on strike and wonder if it's a UNION ALL #youmightbeaDBA  NoelMcKinney Someone asks you to throw another log on the fire and you tell them not to worry about it because Autogrowth is turned on #youmightbeaDBA  Nuurdygirl Even if you have a girlfriend...its possible #youmightbeadba. Yeah-i said its possible!  Nuurdygirl When your girlfriend has to lean around the laptop to kiss you goodnight #youmightbeadba  Old_Man_Fish If you worry about how big your package is and how long it takes to finish #youmightbeaDBA  Old_Man_Fish If you no longer wonder if someone is in trouble or died if you are getting calls at 2AM #youmightbeaDBA  Old_Man_Fish If, when you hear the word ACCESS with no connotation you blood pressure jumps 50 points, #youmightbeaDBA  onpnt When you hear the word inject you immediately get concerned if your databases are OK #youmightbeaDBA  onpnt Your servers haven't been rebooted in a year #youmightbeaDBA  onpnt You know why it's funny when @PaulRandal has the word, "Sheep" in a tweet #youmightbeaDBA  onpnt You have read BOL without actually having a problem to figure out #youmightbeaDBA  onpnt You can type "SELECT columns FROM tables" without typos but tipen ni Banglish ares a messis #youmightbeaDBA  onpnt DR strategies doesn't include the word, RAID in them #youmightbeaDBA  onpnt you can move a SQL Server instance to a new server without the users ever knowing #youmightbeaDBA  onpnt You have made an SSIS package that is more than one step #youmightbeaDBA  onpnt You have the balls to say no to your boss when they ask for the sa password #youmightbeaDBA  onpnt you google to trouble shoot a problem and end up at your own blog (and it fixes it) #youmightbeaDBA  onpnt You talk your wife into moving the family vacation a week earlier so you can attend the areas local SSUG meeting #youmightbeaDBA  onpnt you can explain to a nontechnical person what a deadlock is #youmightbeaDBA  onpnt You hope a girl asks you what your collation is #youmightbeaDBA  onpnt you make jokes that include the words shrink, truncate and 1205. And you are the only one that laughs at them #youmightbeaDBA  onpnt You rate your ability to stay awake to work longer on blogs, twitter, forums and your day to day job with the 5 9's goal #youmightbeaDBA  onpnt you have major surgery and beg the doctor to release you back to work 5 days later because you miss your servers #youmightbeaDBA #TrueStory  onpnt You do have backups and you know how to use them #youmightbeaDBA  onpnt It's the network #youmightbeaDBA  onpnt When the developers get to work your mood changes rapidly #youmightbeaDBA  onpnt When someone says, "PASS", you first think of karaoke #youmightbeaDBA  onpnt Recruiters try to get you to call them *just* because they think you'll give them @BrentO contact info #youmightbeaDBA  onpnt You chuckle every time you go to grab the "CLR" Calcium, Lime and Rust Remover to clean something #youmightbeaDBA  onpnt @MarlonRibunal @mikeSQL Sorry man, it was already in motion ;-) #youmightbeaDBA  onpnt When you have an "I love bacon" sticker on your laptop. #youmightbeaDBA http://twitpic.com/1ry671  onpnt You sing SELECT statements in the shower #youmightbeaDBA  onpnt When you see a chicken it doesn't remind you of food. It reminds you of a guy named Jorge #youmightbeaDBA  onpnt At time, SQL is your mistress #youmightbeaDBA  onpnt Your wife wonders if SQL is the code name of your mistress at times #youmightbeaDBA  onpnt it's Friday and you are on twitter thinking really hard about what would be funny for hash tag #youmightbeaDBA  onpnt You organize your wife's "decorative"pillows on the bed in a B-Tree structure #youmightbeaDBA  PaulWhiteNZ If you: SELECT TOP (1) milk FROM fridge WHERE use_by_date >= GET_DATE() ORDER BY use_by_date ASC #YouMightBeaDBA  RonDBA #youmightbeaDBA if you read @buckwoody's and @BrentO's blogs.  ryaneastabrook @buckwoody omg, you have to stand up a website with these on them, they are awesome #youmightbeaDBA  soulvy @StrateSQL @LadyRuna Or a "Splat" #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer You retweet @buckwoody on a Friday night #youmightbeaDBA  speedracer You can still fall asleep after three cups of coffee #youmightbeaDBA  speedracer Developers make you twitch #youmightbeaDBA  sqlagentman You know what X/1024*8 is. #YouMightBeADBA  SqlAsylum Your still in the office at 5:00 on memorial day weekend. #youmightbeadba :)  SQLBob Whenever someone you know gets pregnant you bring up INNER JOINs or SQL Injection attacks... #youmightbeaDBA  SQLChicken You know one or more SQL folks in the community with an animal in their username #youmightbeaDBA  SQLChicken You've used one or more car analogies to explain how a database works #youmightbeaDBA  SQLChicken “@sqljoe: #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you” lmao nice!  SQLChicken When talking about SSIS your discussions break down into various jokes about packages #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLChicken Just SEEING the code for cursors makes you break out in hives #youmightbeaDBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman You really own a "Stick of Much Developer Whacking" #YouMightBeADBA  SQLCraftsman You coined the phrase "Magic SAN Dust" because calling a vendor's marketing claims BS is not acceptable in a meeting. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  SQLCraftsman Default Blame Acceptor #YouMightBeADBA  SQLCraftsman If you hear about a new feature with the acronym "DAC" and wonder what disaster of a feature it is attached to this time. #YouMightBeADBA  sqljoe #youmightbeaDBA if you wished your wife knew T-sql. USE ShoppingList SELECT NecessaryItems from Supermarket WHERE Category<> ("junk food")  sqljoe #youmightbeaDBA if the first thing you kiss when you wake up is your mobile for not waking you up in the middle of the night  sqljoe #youmightbeaDBA if your wife has a "Do Not Fly" family vacation list of her own including your laptop and mobile  sqljoe #youmightbeaDBA if you have researched for DBA Anonymous groups and attended a #SSUG willing to drop your database (vice)  sqljoe #youmightbeaDBA if your only maintenance windows are staff meetings  sqljoe #youmightbeaDBA if you think of yourself as "The One" in The Matrix "balancing the equation" from The Architect's (developers) poor coding  sqljoe #youmightbeaDBA if you think @PaulRandal should have played the Oracle in The Matrix  sqljoe #youmightbeaDBA if home CD & Movie collection is stored in secured containers,in logical order & naming convention,and with a backup copy  sqljoe #youmightbeaDBA if you applied to attend #sqlu and requested @SQLChicken to pull strings for you  sqljoe #youmightbeaDBA if you have tried to TiVo @MidnightDBA broadcasts  sqljoe #youmightbeaDBA if your #sql user group feels like #AA meetings  sqljoe #youmightbeaDBA if you thought of bringing your #sql books to #sqlsaturday and #sqlpass for autographs  sqljoe #youmightbeaDBA if #sqlpass feels like the #oscars  sqljoe #youmightbeaDBA if you are proud of your small package  SQLLawman #youmightbeaDBA when you hear MDX and Acura is not first thought that comes to mind.  sqlrunner If your wife double checks that there isn't a SQLSat within 200 miles of your vacation destination #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner When you're on a conference call and your wife thinks your speaking in a foreign language #youmightbeaDBA  sqlrunner You treat the word 'access' as a verb, not a noun #youmightbeaDBA  sqlrunner If you are happy with sub-second performance #youmightbeaDBA  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner When you know the names of the NOC people AND their families #youmightbeadba  sqlrunner Your company set's up international phone coverage for your cruise #youmightbeaDBA  sqlsamson @buckwoody if your manager asks you for data and you respond with "there's a script for that" #youmightbeadba  sqlsamson @buckwoody If you receive more messages from your server then your spouse #youmightbeadba  SQLSoldier You've spent all night Valentines Day upgrading the SQL Servers and forgot to tell your wife you'd be working late. #youmightbeadba  SQLSoldier You're flattered when someone calls you a geek. #youmightbeadba  SQLSoldier @llangit @mrdenny it's 11pm on a holiday weekend, & your reading stupid jokes on Twitter then #youmightbeadba  SQLSoldier Your manager borrows lunch money from you because your salary is 30% higher than his. #youmightbeaDBA  SQLSoldier You think "intellisense" is a double negative because it's not intelligent nor makes sense. #youmightbeaDBA  SQLSoldier 75% of the emails you receive at home have the phrase "now following you on Twitter!" in the subject line. #youmightbeaDBA  SQLSoldier You petition Ken Burns to remake Office Space because it should have been 18 hours long. #youmightbeaDBA  SQLSoldier You select a candidate for a Jr DBA position because his resume said he's willing to get your coffee. #youmightbeaDBA  SQLSoldier Somebody misquotes @PaulRandall and you call him on your cell to verify. #youmightbeaDBA  SQLSoldier You wish the elevator in your building was slower because it's the last time you'll be left alone all day. #youmightbeaDBA  SQLSoldier The developers sacrifice small animals before giving you their code for review. #youmightbeaDBA  SQLSoldier Developers bring you coffee and a BLT when you review their code. #youmightbeaDBA #IWish  SQLSoldier You can get out of any family get-together by saying you have to work and nobody questions it. #youmightbeaDBA  SQLSoldier You've requested a HP Superdome for you "test" box. #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier A dev. asks if you've heard about some great new feature in SQL and you show the 16 blog posts you wrote on it ... last year #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA #TrueStory  SQLSoldier The new CEO asks you to justify your salary, so you go on vacation for 2 weeks. And he never questions you again. #youmightbeaDBA  SQLSoldier Your dev team is still testing SQL 2008 and you're already planning for SQL 11. #youmightbeaDBA  SQLSoldier You use a cell phone service coverage map to plan your next vacation. #youmightbeaDBA  SQLSoldier You come in to work at 7 AM because it gives you at least 3 hours without any developers around. #youmightbeaDBA  SQLSoldier You figure out a way to make take your wife on a cruise and deduct it as a business expense. #youmightbeaDBA #sqlcruise  SQLSoldier You name your cat SQLDog because the name @SQLCat was already taken. #youmightbeaDBA  SQLSoldier You rate your blog posts based on the number of retweets you get. #youmightbeaDBA  SQLSoldier You disable random logins just to mess with people. #youmightbeaDBA  SQLSoldier You fall for the pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You can blame an outage on anyone in the company because you're the only one that knows how to find out what really happened #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your leave work early because your internet connection to the data center is better at home #youmightbeaDBA  SQLSoldier You cheer when Milton burns down the company in Office Space #youmightbeaDBA  SQLSoldier Your think the 4 food groups are coffee, bacon, fast food, and Mountain Dew. #youmightbeaDBA  SQLSoldier You tell someone your job title and they ask "What?" You describe it and they ask "What?". So you say "computer geek". #youmightbeaDBA  SQLSoldier The #1 referrer to your blog is Twitter.com. #youmightbeaDBA  SQLSoldier Your idea of a good time on a Saturday involves free training. #youmightbeaDBA #sqlsat43  SQLSoldier You write a book that all of your co-workers have and none have read it. #youmightbeaDBA  SQLSoldier You write a book that sells a couple thousand copies and is heralded a best seller. #youmightbeaDBA  SQLSoldier No matter how sick you are, you go to work if it's time to pass the pager on to the next guy. #youmightbeaDBA #TrueStory  SQLSoldier You go out on the town, and strangers walk up to you and say, "Hey you're that SQL guy" #youmightbeaDBA #TrueStory  SQLSoldier Your wife asks you to fix something, and you request a downtime window. #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier Your best pickup line, "Hey baby, what's your collation?" #youmightbeaDBA  SQLSoldier Your wife asks when you'll be home, and you tell her that you wish you knew. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You list TSQL as your native language on the 2010 census. #youmightbeaDBA  SQLSoldier Starbucks' stock price drops every time you go on vacation. #youmightbeaDBA  SQLSoldier You're happy when the web master says that the website is down. #youmightbeaDBA  SQLSoldier You know that @BuckWoody is not someone's porno name. #youmightbeaDBA  SQLSoldier You get mad when someone calls your car a "heap" because you've always considered it to be a "clustered index". #youmightbeaDBA  SQLSoldier Your blog has more hits than your company's website. #youmightbeaDBA  SQLSoldier You systematically remove the asterisk key from all keyboards in the company except yours. #youmightbeaDBA  SQLSoldier When asked if you recycle, you reply that you run sp_cycle_errorlog every night at midnight #youmightbeaDBA  SQLSoldier You wouldn't allow someone named @AdamMachanic to work on your car. #youmightbeaDBA  SQLSoldier You switch offices every 3 days to avoid developers #youmightbeaDBA  SQLSoldier PSS has your number on speed dial. #youmightbeaDBA  SQLSoldier You frown when you they tell Neo that he's going to the Oracle #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  swhaley you regretted saying "This shouldn't effect production" #youmightbeaDBA  Tarwn A pleasurable saturday means spending the day learning more about what you already do the rest of the week #youmightbeaDBA ...oh, wait...  thelostforum For great justice; all our base are belong to YOU !! #youmightbeadba  thelostforum @SQLSoldier: You need a witness to use a mirror #youmightbeaDBA ;)  TimCost you capitalize key words. always. everywhere. you can't help it, usually don't even notice. #youmightbeaDBA  Toshana Your the only one in your company not impressed with the developers new application. #youmightbeaDBA  venzann Coming soon from a (respected) book publisher - @buckwoody's #youmightbeaDBA  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann I love the #youmightbeaDBA tag. Found at least 6 new DBAs to follow..  venzann He's on a role tonight. @buckwoody is summing up my life with his #youmightbeaDBA tweets...  venzann You use #sqlhelp as a primary resource during troubleshooting #youmightbeaDBA  venzann You insist on stricter password security for your sql servers than you implement on your own laptop #youmightbeaDBA  WesBrownSQL @buckwoody you are up so late the only tweets you see are from @buckwoody #youmightbeaDBA  WesBrownSQL @SQLSoldier you are upgrading all your 2005 prod servers to 2008 R2 on a three day weekend... #youmightbeaDBA  zippy1981 #youmightbeaDBA if everytime you do something with #mongodb you think of the Vulcan proverb "only Nixon could go to China."  Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Agile Development

    - by James Oloo Onyango
    Alot of literature has and is being written about agile developement and its surrounding philosophies. In my quest to find the best way to express the importance of agile methodologies, i have found Robert C. Martin's "A Satire Of Two Companies" to be both the most concise and thorough! Enjoy the read! Rufus Inc Project Kick Off Your name is Bob. The date is January 3, 2001, and your head still aches from the recent millennial revelry. You are sitting in a conference room with several managers and a group of your peers. You are a project team leader. Your boss is there, and he has brought along all of his team leaders. His boss called the meeting. "We have a new project to develop," says your boss's boss. Call him BB. The points in his hair are so long that they scrape the ceiling. Your boss's points are just starting to grow, but he eagerly awaits the day when he can leave Brylcream stains on the acoustic tiles. BB describes the essence of the new market they have identified and the product they want to develop to exploit this market. "We must have this new project up and working by fourth quarter October 1," BB demands. "Nothing is of higher priority, so we are cancelling your current project." The reaction in the room is stunned silence. Months of work are simply going to be thrown away. Slowly, a murmur of objection begins to circulate around the conference table.   His points give off an evil green glow as BB meets the eyes of everyone in the room. One by one, that insidious stare reduces each attendee to quivering lumps of protoplasm. It is clear that he will brook no discussion on this matter. Once silence has been restored, BB says, "We need to begin immediately. How long will it take you to do the analysis?" You raise your hand. Your boss tries to stop you, but his spitwad misses you and you are unaware of his efforts.   "Sir, we can't tell you how long the analysis will take until we have some requirements." "The requirements document won't be ready for 3 or 4 weeks," BB says, his points vibrating with frustration. "So, pretend that you have the requirements in front of you now. How long will you require for analysis?" No one breathes. Everyone looks around to see whether anyone has some idea. "If analysis goes beyond April 1, we have a problem. Can you finish the analysis by then?" Your boss visibly gathers his courage: "We'll find a way, sir!" His points grow 3 mm, and your headache increases by two Tylenol. "Good." BB smiles. "Now, how long will it take to do the design?" "Sir," you say. Your boss visibly pales. He is clearly worried that his 3 mms are at risk. "Without an analysis, it will not be possible to tell you how long design will take." BB's expression shifts beyond austere.   "PRETEND you have the analysis already!" he says, while fixing you with his vacant, beady little eyes. "How long will it take you to do the design?" Two Tylenol are not going to cut it. Your boss, in a desperate attempt to save his new growth, babbles: "Well, sir, with only six months left to complete the project, design had better take no longer than 3 months."   "I'm glad you agree, Smithers!" BB says, beaming. Your boss relaxes. He knows his points are secure. After a while, he starts lightly humming the Brylcream jingle. BB continues, "So, analysis will be complete by April 1, design will be complete by July 1, and that gives you 3 months to implement the project. This meeting is an example of how well our new consensus and empowerment policies are working. Now, get out there and start working. I'll expect to see TQM plans and QIT assignments on my desk by next week. Oh, and don't forget that your crossfunctional team meetings and reports will be needed for next month's quality audit." "Forget the Tylenol," you think to yourself as you return to your cubicle. "I need bourbon."   Visibly excited, your boss comes over to you and says, "Gosh, what a great meeting. I think we're really going to do some world shaking with this project." You nod in agreement, too disgusted to do anything else. "Oh," your boss continues, "I almost forgot." He hands you a 30-page document. "Remember that the SEI is coming to do an evaluation next week. This is the evaluation guide. You need to read through it, memorize it, and then shred it. It tells you how to answer any questions that the SEI auditors ask you. It also tells you what parts of the building you are allowed to take them to and what parts to avoid. We are determined to be a CMM level 3 organization by June!"   You and your peers start working on the analysis of the new project. This is difficult because you have no requirements. But from the 10-minute introduction given by BB on that fateful morning, you have some idea of what the product is supposed to do.   Corporate process demands that you begin by creating a use case document. You and your team begin enumerating use cases and drawing oval and stick diagrams. Philosophical debates break out among the team members. There is disagreement as to whether certain use cases should be connected with <<extends>> or <<includes>> relationships. Competing models are created, but nobody knows how to evaluate them. The debate continues, effectively paralyzing progress.   After a week, somebody finds the iceberg.com Web site, which recommends disposing entirely of <<extends>> and <<includes>> and replacing them with <<precedes>> and <<uses>>. The documents on this Web site, authored by Don Sengroiux, describes a method known as stalwart-analysis, which claims to be a step-by-step method for translating use cases into design diagrams. More competing use case models are created using this new scheme, but again, people can't agree on how to evaluate them. The thrashing continues. More and more, the use case meetings are driven by emotion rather than by reason. If it weren't for the fact that you don't have requirements, you'd be pretty upset by the lack of progress you are making. The requirements document arrives on February 15. And then again on February 20, 25, and every week thereafter. Each new version contradicts the previous one. Clearly, the marketing folks who are writing the requirements, empowered though they might be, are not finding consensus.   At the same time, several new competing use case templates have been proposed by the various team members. Each template presents its own particularly creative way of delaying progress. The debates rage on. On March 1, Prudence Putrigence, the process proctor, succeeds in integrating all the competing use case forms and templates into a single, all-encompassing form. Just the blank form is 15 pages long. She has managed to include every field that appeared on all the competing templates. She also presents a 159- page document describing how to fill out the use case form. All current use cases must be rewritten according to the new standard.   You marvel to yourself that it now requires 15 pages of fill-in-the-blank and essay questions to answer the question: What should the system do when the user presses Return? The corporate process (authored by L. E. Ott, famed author of "Holistic Analysis: A Progressive Dialectic for Software Engineers") insists that you discover all primary use cases, 87 percent of all secondary use cases, and 36.274 percent of all tertiary use cases before you can complete analysis and enter the design phase. You have no idea what a tertiary use case is. So in an attempt to meet this requirement, you try to get your use case document reviewed by the marketing department, which you hope will know what a tertiary use case is.   Unfortunately, the marketing folks are too busy with sales support to talk to you. Indeed, since the project started, you have not been able to get a single meeting with marketing, which has provided a never-ending stream of changing and contradictory requirements documents.   While one team has been spinning endlessly on the use case document, another team has been working out the domain model. Endless variations of UML documents are pouring out of this team. Every week, the model is reworked.   The team members can't decide whether to use <<interfaces>> or <<types>> in the model. A huge disagreement has been raging on the proper syntax and application of OCL. Others on the team just got back from a 5-day class on catabolism, and have been producing incredibly detailed and arcane diagrams that nobody else can fathom.   On March 27, with one week to go before analysis is to be complete, you have produced a sea of documents and diagrams but are no closer to a cogent analysis of the problem than you were on January 3. **** And then, a miracle happens.   **** On Saturday, April 1, you check your e-mail from home. You see a memo from your boss to BB. It states unequivocally that you are done with the analysis! You phone your boss and complain. "How could you have told BB that we were done with the analysis?" "Have you looked at a calendar lately?" he responds. "It's April 1!" The irony of that date does not escape you. "But we have so much more to think about. So much more to analyze! We haven't even decided whether to use <<extends>> or <<precedes>>!" "Where is your evidence that you are not done?" inquires your boss, impatiently. "Whaaa . . . ." But he cuts you off. "Analysis can go on forever; it has to be stopped at some point. And since this is the date it was scheduled to stop, it has been stopped. Now, on Monday, I want you to gather up all existing analysis materials and put them into a public folder. Release that folder to Prudence so that she can log it in the CM system by Monday afternoon. Then get busy and start designing."   As you hang up the phone, you begin to consider the benefits of keeping a bottle of bourbon in your bottom desk drawer. They threw a party to celebrate the on-time completion of the analysis phase. BB gave a colon-stirring speech on empowerment. And your boss, another 3 mm taller, congratulated his team on the incredible show of unity and teamwork. Finally, the CIO takes the stage to tell everyone that the SEI audit went very well and to thank everyone for studying and shredding the evaluation guides that were passed out. Level 3 now seems assured and will be awarded by June. (Scuttlebutt has it that managers at the level of BB and above are to receive significant bonuses once the SEI awards level 3.)   As the weeks flow by, you and your team work on the design of the system. Of course, you find that the analysis that the design is supposedly based on is flawedno, useless; no, worse than useless. But when you tell your boss that you need to go back and work some more on the analysis to shore up its weaker sections, he simply states, "The analysis phase is over. The only allowable activity is design. Now get back to it."   So, you and your team hack the design as best you can, unsure of whether the requirements have been properly analyzed. Of course, it really doesn't matter much, since the requirements document is still thrashing with weekly revisions, and the marketing department still refuses to meet with you.     The design is a nightmare. Your boss recently misread a book named The Finish Line in which the author, Mark DeThomaso, blithely suggested that design documents should be taken down to code-level detail. "If we are going to be working at that level of detail," you ask, "why don't we simply write the code instead?" "Because then you wouldn't be designing, of course. And the only allowable activity in the design phase is design!" "Besides," he continues, "we have just purchased a companywide license for Dandelion! This tool enables 'Round the Horn Engineering!' You are to transfer all design diagrams into this tool. It will automatically generate our code for us! It will also keep the design diagrams in sync with the code!" Your boss hands you a brightly colored shrinkwrapped box containing the Dandelion distribution. You accept it numbly and shuffle off to your cubicle. Twelve hours, eight crashes, one disk reformatting, and eight shots of 151 later, you finally have the tool installed on your server. You consider the week your team will lose while attending Dandelion training. Then you smile and think, "Any week I'm not here is a good week." Design diagram after design diagram is created by your team. Dandelion makes it very difficult to draw these diagrams. There are dozens and dozens of deeply nested dialog boxes with funny text fields and check boxes that must all be filled in correctly. And then there's the problem of moving classes between packages. At first, these diagram are driven from the use cases. But the requirements are changing so often that the use cases rapidly become meaningless. Debates rage about whether VISITOR or DECORATOR design patterns should be used. One developer refuses to use VISITOR in any form, claiming that it's not a properly object-oriented construct. Someone refuses to use multiple inheritance, since it is the spawn of the devil. Review meetings rapidly degenerate into debates about the meaning of object orientation, the definition of analysis versus design, or when to use aggregation versus association. Midway through the design cycle, the marketing folks announce that they have rethought the focus of the system. Their new requirements document is completely restructured. They have eliminated several major feature areas and replaced them with feature areas that they anticipate customer surveys will show to be more appropriate. You tell your boss that these changes mean that you need to reanalyze and redesign much of the system. But he says, "The analysis phase is system. But he says, "The analysis phase is over. The only allowable activity is design. Now get back to it."   You suggest that it might be better to create a simple prototype to show to the marketing folks and even some potential customers. But your boss says, "The analysis phase is over. The only allowable activity is design. Now get back to it." Hack, hack, hack, hack. You try to create some kind of a design document that might reflect the new requirements documents. However, the revolution of the requirements has not caused them to stop thrashing. Indeed, if anything, the wild oscillations of the requirements document have only increased in frequency and amplitude.   You slog your way through them.   On June 15, the Dandelion database gets corrupted. Apparently, the corruption has been progressive. Small errors in the DB accumulated over the months into bigger and bigger errors. Eventually, the CASE tool just stopped working. Of course, the slowly encroaching corruption is present on all the backups. Calls to the Dandelion technical support line go unanswered for several days. Finally, you receive a brief e-mail from Dandelion, informing you that this is a known problem and that the solution is to purchase the new version, which they promise will be ready some time next quarter, and then reenter all the diagrams by hand.   ****   Then, on July 1 another miracle happens! You are done with the design!   Rather than go to your boss and complain, you stock your middle desk drawer with some vodka.   **** They threw a party to celebrate the on-time completion of the design phase and their graduation to CMM level 3. This time, you find BB's speech so stirring that you have to use the restroom before it begins. New banners and plaques are all over your workplace. They show pictures of eagles and mountain climbers, and they talk about teamwork and empowerment. They read better after a few scotches. That reminds you that you need to clear out your file cabinet to make room for the brandy. You and your team begin to code. But you rapidly discover that the design is lacking in some significant areas. Actually, it's lacking any significance at all. You convene a design session in one of the conference rooms to try to work through some of the nastier problems. But your boss catches you at it and disbands the meeting, saying, "The design phase is over. The only allowable activity is coding. Now get back to it."   ****   The code generated by Dandelion is really hideous. It turns out that you and your team were using association and aggregation the wrong way, after all. All the generated code has to be edited to correct these flaws. Editing this code is extremely difficult because it has been instrumented with ugly comment blocks that have special syntax that Dandelion needs in order to keep the diagrams in sync with the code. If you accidentally alter one of these comments, the diagrams will be regenerated incorrectly. It turns out that "Round the Horn Engineering" requires an awful lot of effort. The more you try to keep the code compatible with Dandelion, the more errors Dandelion generates. In the end, you give up and decide to keep the diagrams up to date manually. A second later, you decide that there's no point in keeping the diagrams up to date at all. Besides, who has time?   Your boss hires a consultant to build tools to count the number of lines of code that are being produced. He puts a big thermometer graph on the wall with the number 1,000,000 on the top. Every day, he extends the red line to show how many lines have been added. Three days after the thermometer appears on the wall, your boss stops you in the hall. "That graph isn't growing quickly enough. We need to have a million lines done by October 1." "We aren't even sh-sh-sure that the proshect will require a m-million linezh," you blather. "We have to have a million lines done by October 1," your boss reiterates. His points have grown again, and the Grecian formula he uses on them creates an aura of authority and competence. "Are you sure your comment blocks are big enough?" Then, in a flash of managerial insight, he says, "I have it! I want you to institute a new policy among the engineers. No line of code is to be longer than 20 characters. Any such line must be split into two or more preferably more. All existing code needs to be reworked to this standard. That'll get our line count up!"   You decide not to tell him that this will require two unscheduled work months. You decide not to tell him anything at all. You decide that intravenous injections of pure ethanol are the only solution. You make the appropriate arrangements. Hack, hack, hack, and hack. You and your team madly code away. By August 1, your boss, frowning at the thermometer on the wall, institutes a mandatory 50-hour workweek.   Hack, hack, hack, and hack. By September 1st, the thermometer is at 1.2 million lines and your boss asks you to write a report describing why you exceeded the coding budget by 20 percent. He institutes mandatory Saturdays and demands that the project be brought back down to a million lines. You start a campaign of remerging lines. Hack, hack, hack, and hack. Tempers are flaring; people are quitting; QA is raining trouble reports down on you. Customers are demanding installation and user manuals; salespeople are demanding advance demonstrations for special customers; the requirements document is still thrashing, the marketing folks are complaining that the product isn't anything like they specified, and the liquor store won't accept your credit card anymore. Something has to give.    On September 15, BB calls a meeting. As he enters the room, his points are emitting clouds of steam. When he speaks, the bass overtones of his carefully manicured voice cause the pit of your stomach to roll over. "The QA manager has told me that this project has less than 50 percent of the required features implemented. He has also informed me that the system crashes all the time, yields wrong results, and is hideously slow. He has also complained that he cannot keep up with the continuous train of daily releases, each more buggy than the last!" He stops for a few seconds, visibly trying to compose himself. "The QA manager estimates that, at this rate of development, we won't be able to ship the product until December!" Actually, you think it's more like March, but you don't say anything. "December!" BB roars with such derision that people duck their heads as though he were pointing an assault rifle at them. "December is absolutely out of the question. Team leaders, I want new estimates on my desk in the morning. I am hereby mandating 65-hour work weeks until this project is complete. And it better be complete by November 1."   As he leaves the conference room, he is heard to mutter: "Empowermentbah!" * * * Your boss is bald; his points are mounted on BB's wall. The fluorescent lights reflecting off his pate momentarily dazzle you. "Do you have anything to drink?" he asks. Having just finished your last bottle of Boone's Farm, you pull a bottle of Thunderbird from your bookshelf and pour it into his coffee mug. "What's it going to take to get this project done? " he asks. "We need to freeze the requirements, analyze them, design them, and then implement them," you say callously. "By November 1?" your boss exclaims incredulously. "No way! Just get back to coding the damned thing." He storms out, scratching his vacant head.   A few days later, you find that your boss has been transferred to the corporate research division. Turnover has skyrocketed. Customers, informed at the last minute that their orders cannot be fulfilled on time, have begun to cancel their orders. Marketing is re-evaluating whether this product aligns with the overall goals of the company. Memos fly, heads roll, policies change, and things are, overall, pretty grim. Finally, by March, after far too many sixty-five hour weeks, a very shaky version of the software is ready. In the field, bug-discovery rates are high, and the technical support staff are at their wits' end, trying to cope with the complaints and demands of the irate customers. Nobody is happy.   In April, BB decides to buy his way out of the problem by licensing a product produced by Rupert Industries and redistributing it. The customers are mollified, the marketing folks are smug, and you are laid off.     Rupert Industries: Project Alpha   Your name is Robert. The date is January 3, 2001. The quiet hours spent with your family this holiday have left you refreshed and ready for work. You are sitting in a conference room with your team of professionals. The manager of the division called the meeting. "We have some ideas for a new project," says the division manager. Call him Russ. He is a high-strung British chap with more energy than a fusion reactor. He is ambitious and driven but understands the value of a team. Russ describes the essence of the new market opportunity the company has identified and introduces you to Jane, the marketing manager, who is responsible for defining the products that will address it. Addressing you, Jane says, "We'd like to start defining our first product offering as soon as possible. When can you and your team meet with me?" You reply, "We'll be done with the current iteration of our project this Friday. We can spare a few hours for you between now and then. After that, we'll take a few people from the team and dedicate them to you. We'll begin hiring their replacements and the new people for your team immediately." "Great," says Russ, "but I want you to understand that it is critical that we have something to exhibit at the trade show coming up this July. If we can't be there with something significant, we'll lose the opportunity."   "I understand," you reply. "I don't yet know what it is that you have in mind, but I'm sure we can have something by July. I just can't tell you what that something will be right now. In any case, you and Jane are going to have complete control over what we developers do, so you can rest assured that by July, you'll have the most important things that can be accomplished in that time ready to exhibit."   Russ nods in satisfaction. He knows how this works. Your team has always kept him advised and allowed him to steer their development. He has the utmost confidence that your team will work on the most important things first and will produce a high-quality product.   * * *   "So, Robert," says Jane at their first meeting, "How does your team feel about being split up?" "We'll miss working with each other," you answer, "but some of us were getting pretty tired of that last project and are looking forward to a change. So, what are you people cooking up?" Jane beams. "You know how much trouble our customers currently have . . ." And she spends a half hour or so describing the problem and possible solution. "OK, wait a second" you respond. "I need to be clear about this." And so you and Jane talk about how this system might work. Some of her ideas aren't fully formed. You suggest possible solutions. She likes some of them. You continue discussing.   During the discussion, as each new topic is addressed, Jane writes user story cards. Each card represents something that the new system has to do. The cards accumulate on the table and are spread out in front of you. Both you and Jane point at them, pick them up, and make notes on them as you discuss the stories. The cards are powerful mnemonic devices that you can use to represent complex ideas that are barely formed.   At the end of the meeting, you say, "OK, I've got a general idea of what you want. I'm going to talk to the team about it. I imagine they'll want to run some experiments with various database structures and presentation formats. Next time we meet, it'll be as a group, and we'll start identifying the most important features of the system."   A week later, your nascent team meets with Jane. They spread the existing user story cards out on the table and begin to get into some of the details of the system. The meeting is very dynamic. Jane presents the stories in the order of their importance. There is much discussion about each one. The developers are concerned about keeping the stories small enough to estimate and test. So they continually ask Jane to split one story into several smaller stories. Jane is concerned that each story have a clear business value and priority, so as she splits them, she makes sure that this stays true.   The stories accumulate on the table. Jane writes them, but the developers make notes on them as needed. Nobody tries to capture everything that is said; the cards are not meant to capture everything but are simply reminders of the conversation.   As the developers become more comfortable with the stories, they begin writing estimates on them. These estimates are crude and budgetary, but they give Jane an idea of what the story will cost.   At the end of the meeting, it is clear that many more stories could be discussed. It is also clear that the most important stories have been addressed and that they represent several months worth of work. Jane closes the meeting by taking the cards with her and promising to have a proposal for the first release in the morning.   * * *   The next morning, you reconvene the meeting. Jane chooses five cards and places them on the table. "According to your estimates, these cards represent about one perfect team-week's worth of work. The last iteration of the previous project managed to get one perfect team-week done in 3 real weeks. If we can get these five stories done in 3 weeks, we'll be able to demonstrate them to Russ. That will make him feel very comfortable about our progress." Jane is pushing it. The sheepish look on her face lets you know that she knows it too. You reply, "Jane, this is a new team, working on a new project. It's a bit presumptuous to expect that our velocity will be the same as the previous team's. However, I met with the team yesterday afternoon, and we all agreed that our initial velocity should, in fact, be set to one perfectweek for every 3 real-weeks. So you've lucked out on this one." "Just remember," you continue, "that the story estimates and the story velocity are very tentative at this point. We'll learn more when we plan the iteration and even more when we implement it."   Jane looks over her glasses at you as if to say "Who's the boss around here, anyway?" and then smiles and says, "Yeah, don't worry. I know the drill by now."Jane then puts 15 more cards on the table. She says, "If we can get all these cards done by the end of March, we can turn the system over to our beta test customers. And we'll get good feedback from them."   You reply, "OK, so we've got our first iteration defined, and we have the stories for the next three iterations after that. These four iterations will make our first release."   "So," says Jane, can you really do these five stories in the next 3 weeks?" "I don't know for sure, Jane," you reply. "Let's break them down into tasks and see what we get."   So Jane, you, and your team spend the next several hours taking each of the five stories that Jane chose for the first iteration and breaking them down into small tasks. The developers quickly realize that some of the tasks can be shared between stories and that other tasks have commonalities that can probably be taken advantage of. It is clear that potential designs are popping into the developers' heads. From time to time, they form little discussion knots and scribble UML diagrams on some cards.   Soon, the whiteboard is filled with the tasks that, once completed, will implement the five stories for this iteration. You start the sign-up process by saying, "OK, let's sign up for these tasks." "I'll take the initial database generation." Says Pete. "That's what I did on the last project, and this doesn't look very different. I estimate it at two of my perfect workdays." "OK, well, then, I'll take the login screen," says Joe. "Aw, darn," says Elaine, the junior member of the team, "I've never done a GUI, and kinda wanted to try that one."   "Ah, the impatience of youth," Joe says sagely, with a wink in your direction. "You can assist me with it, young Jedi." To Jane: "I think it'll take me about three of my perfect workdays."   One by one, the developers sign up for tasks and estimate them in terms of their own perfect workdays. Both you and Jane know that it is best to let the developers volunteer for tasks than to assign the tasks to them. You also know full well that you daren't challenge any of the developers' estimates. You know these people, and you trust them. You know that they are going to do the very best they can.   The developers know that they can't sign up for more perfect workdays than they finished in the last iteration they worked on. Once each developer has filled his or her schedule for the iteration, they stop signing up for tasks.   Eventually, all the developers have stopped signing up for tasks. But, of course, tasks are still left on the board.   "I was worried that that might happen," you say, "OK, there's only one thing to do, Jane. We've got too much to do in this iteration. What stories or tasks can we remove?" Jane sighs. She knows that this is the only option. Working overtime at the beginning of a project is insane, and projects where she's tried it have not fared well.   So Jane starts to remove the least-important functionality. "Well, we really don't need the login screen just yet. We can simply start the system in the logged-in state." "Rats!" cries Elaine. "I really wanted to do that." "Patience, grasshopper." says Joe. "Those who wait for the bees to leave the hive will not have lips too swollen to relish the honey." Elaine looks confused. Everyone looks confused. "So . . .," Jane continues, "I think we can also do away with . . ." And so, bit by bit, the list of tasks shrinks. Developers who lose a task sign up for one of the remaining ones.   The negotiation is not painless. Several times, Jane exhibits obvious frustration and impatience. Once, when tensions are especially high, Elaine volunteers, "I'll work extra hard to make up some of the missing time." You are about to correct her when, fortunately, Joe looks her in the eye and says, "When once you proceed down the dark path, forever will it dominate your destiny."   In the end, an iteration acceptable to Jane is reached. It's not what Jane wanted. Indeed, it is significantly less. But it's something the team feels that can be achieved in the next 3 weeks.   And, after all, it still addresses the most important things that Jane wanted in the iteration. "So, Jane," you say when things had quieted down a bit, "when can we expect acceptance tests from you?" Jane sighs. This is the other side of the coin. For every story the development team implements,   Jane must supply a suite of acceptance tests that prove that it works. And the team needs these long before the end of the iteration, since they will certainly point out differences in the way Jane and the developers imagine the system's behaviour.   "I'll get you some example test scripts today," Jane promises. "I'll add to them every day after that. You'll have the entire suite by the middle of the iteration."   * * *   The iteration begins on Monday morning with a flurry of Class, Responsibilities, Collaborators sessions. By midmorning, all the developers have assembled into pairs and are rapidly coding away. "And now, my young apprentice," Joe says to Elaine, "you shall learn the mysteries of test-first design!"   "Wow, that sounds pretty rad," Elaine replies. "How do you do it?" Joe beams. It's clear that he has been anticipating this moment. "OK, what does the code do right now?" "Huh?" replied Elaine, "It doesn't do anything at all; there is no code."   "So, consider our task; can you think of something the code should do?" "Sure," Elaine said with youthful assurance, "First, it should connect to the database." "And thereupon, what must needs be required to connecteth the database?" "You sure talk weird," laughed Elaine. "I think we'd have to get the database object from some registry and call the Connect() method. "Ah, astute young wizard. Thou perceives correctly that we requireth an object within which we can cacheth the database object." "Is 'cacheth' really a word?" "It is when I say it! So, what test can we write that we know the database registry should pass?" Elaine sighs. She knows she'll just have to play along. "We should be able to create a database object and pass it to the registry in a Store() method. And then we should be able to pull it out of the registry with a Get() method and make sure it's the same object." "Oh, well said, my prepubescent sprite!" "Hay!" "So, now, let's write a test function that proves your case." "But shouldn't we write the database object and registry object first?" "Ah, you've much to learn, my young impatient one. Just write the test first." "But it won't even compile!" "Are you sure? What if it did?" "Uh . . ." "Just write the test, Elaine. Trust me." And so Joe, Elaine, and all the other developers began to code their tasks, one test case at a time. The room in which they worked was abuzz with the conversations between the pairs. The murmur was punctuated by an occasional high five when a pair managed to finish a task or a difficult test case.   As development proceeded, the developers changed partners once or twice a day. Each developer got to see what all the others were doing, and so knowledge of the code spread generally throughout the team.   Whenever a pair finished something significant whether a whole task or simply an important part of a task they integrated what they had with the rest of the system. Thus, the code base grew daily, and integration difficulties were minimized.   The developers communicated with Jane on a daily basis. They'd go to her whenever they had a question about the functionality of the system or the interpretation of an acceptance test case.   Jane, good as her word, supplied the team with a steady stream of acceptance test scripts. The team read these carefully and thereby gained a much better understanding of what Jane expected the system to do. By the beginning of the second week, there was enough functionality to demonstrate to Jane. She watched eagerly as the demonstration passed test case after test case. "This is really cool," Jane said as the demonstration finally ended. "But this doesn't seem like one-third of the tasks. Is your velocity slower than anticipated?"   You grimace. You'd been waiting for a good time to mention this to Jane but now she was forcing the issue. "Yes, unfortunately, we are going more slowly than we had expected. The new application server we are using is turning out to be a pain to configure. Also, it takes forever to reboot, and we have to reboot it whenever we make even the slightest change to its configuration."   Jane eyes you with suspicion. The stress of last Monday's negotiations had still not entirely dissipated. She says, "And what does this mean to our schedule? We can't slip it again, we just can't. Russ will have a fit! He'll haul us all into the woodshed and ream us some new ones."   You look Jane right in the eyes. There's no pleasant way to give someone news like this. So you just blurt out, "Look, if things keep going like they're going, we're not going to be done with everything by next Friday. Now it's possible that we'll figure out a way to go faster. But, frankly, I wouldn't depend on that. You should start thinking about one or two tasks that could be removed from the iteration without ruining the demonstration for Russ. Come hell or high water, we are going to give that demonstration on Friday, and I don't think you want us to choose which tasks to omit."   "Aw forchrisakes!" Jane barely manages to stifle yelling that last word as she stalks away, shaking her head. Not for the first time, you say to yourself, "Nobody ever promised me project management would be easy." You are pretty sure it won't be the last time, either.   Actually, things went a bit better than you had hoped. The team did, in fact, have to drop one task from the iteration, but Jane had chosen wisely, and the demonstration for Russ went without a hitch. Russ was not impressed with the progress, but neither was he dismayed. He simply said, "This is pretty good. But remember, we have to be able to demonstrate this system at the trade show in July, and at this rate, it doesn't look like you'll have all that much to show." Jane, whose attitude had improved dramatically with the completion of the iteration, responded to Russ by saying, "Russ, this team is working hard, and well. When July comes around, I am confident that we'll have something significant to demonstrate. It won't be everything, and some of it may be smoke and mirrors, but we'll have something."   Painful though the last iteration was, it had calibrated your velocity numbers. The next iteration went much better. Not because your team got more done than in the last iteration but simply because the team didn't have to remove any tasks or stories in the middle of the iteration.   By the start of the fourth iteration, a natural rhythm has been established. Jane, you, and the team know exactly what to expect from one another. The team is running hard, but the pace is sustainable. You are confident that the team can keep up this pace for a year or more.   The number of surprises in the schedule diminishes to near zero; however, the number of surprises in the requirements does not. Jane and Russ frequently look over the growing system and make recommendations or changes to the existing functionality. But all parties realize that these changes take time and must be scheduled. So the changes do not cause anyone's expectations to be violated. In March, there is a major demonstration of the system to the board of directors. The system is very limited and is not yet in a form good enough to take to the trade show, but progress is steady, and the board is reasonably impressed.   The second release goes even more smoothly than the first. By now, the team has figured out a way to automate Jane's acceptance test scripts. The team has also refactored the design of the system to the point that it is really easy to add new features and change old ones. The second release was done by the end of June and was taken to the trade show. It had less in it than Jane and Russ would have liked, but it did demonstrate the most important features of the system. Although customers at the trade show noticed that certain features were missing, they were very impressed overall. You, Russ, and Jane all returned from the trade show with smiles on your faces. You all felt as though this project was a winner.   Indeed, many months later, you are contacted by Rufus Inc. That company had been working on a system like this for its internal operations. Rufus has canceled the development of that system after a death-march project and is negotiating to license your technology for its environment.   Indeed, things are looking up!

    Read the article

< Previous Page | 4 5 6 7 8