Search Results

Search found 13047 results on 522 pages for 'np hard'.

Page 8/522 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Repair BAD Sectors or Buy a new HDD?

    - by Nehal J. Wani
    I have a Seagate internal hard disk drive. I recently opened up my laptop [Dell Inspiron N5010] [Warranty has expired], cleaned it and it worked normally after waking up from hibernation. However, when I restarted it, it stuck on windows loading screen, then tried to boot from Dell recovery partition but failed. It gave the error: Windows has encounter a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer. Status: 0xc00000e9 Info: An unexpected I/O error has occurred. While cleaning, I had mistakenly touched the round silvery thing at the bottom of the HDD. I don't know whether this has caused the problem or not. Since I have Fedora also installed in the same HDD, I can boot from it but it shows weird read errors when I ask it to mount Windows partitions. The disk utility also says that the Hard Disk has many bad sectors and needs to be replaced. I downloaded Seatools from Seagate website and used it. In the long test, I gave it permission to repair the first 100 errors which it did successfully. Now I am confused at what I should do. Internal Hard Disk Costs: a. Internal HDD 500GB Costs: Rs3518 b.1 External HDD 500GB Costs: Rs3472 b.2 External HDD 1TB Costs: Rs5500 c. Internal to External Converter Costs: Rs650 I have the following options: (i) Buy an External HDD, backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to buy another internal HDD and replace the damaged one. OR break the seal of the external one and put it inside my laptop as internal. Breaking the case involves risks. (ii) Buy a Internal HDD and an Internal to External Converter Case [Not very reliable], backup my data. Try to repair bad sectors of HDD. Then two cases arise: (a) My Internal HDD gets repaired [almost] (b) My internal HDD doesn't get repaired. Then I need to just put in the new internal HDD I just bought. Experts, please guide me as to what will be the most VFM option? Also, if a HDD is failing, is it that I shouldn't read from it too otherwise there is a chance of other sectors failing? What I mean is, is it wrong to read from the HDD without taking backup first?

    Read the article

  • Combine Local Disk to another hard drive

    - by admintech
    I have a 150gb local disk on my Windows 7 x64 ultimate computer, i recently bought another 150gb hard drive and wish to merge/combine the 2 together to form 1 300gb hard drive. Is this possible to do without losing all the data on it? And i have thought about SATA but was curious if there was a faster easier option before i go ahead and take my pc apart

    Read the article

  • Super slow Western Digial External hard drive

    - by shinokada
    I have 2TB of WD external hard drive. I use windows Vista 32x. on DELL laptop Latitude D630 and connect through USB cable. When I transfer from my C drive to external hard drive it transfer only 3KB/sec. It take 30min to transfer 6MB. It is useless at the moment. Can anyone help me how to speed up please. Thanks in advance.

    Read the article

  • Everything on hard drive suddenly vanished without explanation, but the drive seems otherwise functional

    - by user160705
    Windows 7 Ultimate x64 Custom-built desktop I have a new desktop that I built a few months ago that has a four-year-old WD hard drive and a two-year-old drive. I had set it up so that the newer drive had Windows and most of my files on it while the older drive had my music library, some movies and games, and a backup of all of my documents. About a month ago, I installed some new case fans and, in the process, I temporarily unplugged my hard drive (while the computer was off of course - I took all the necessary precautions) for wire management. I plugged it back in, and didn't really think anything of it. At around that time, however, I noticed that my older hard drive wasn't showing up in Windows Explorer anymore but I didn't really have time to check into it (I had just started college) and I'm finally getting a chance to now. That drive doesn't show up in Windows Explorer at all but it does show up in Disk Management. That screen shows the following: http://puu.sh/17mMN Any idea what happened? Is there any way to recover my files? Thanks in advance for your help! EDIT: The music and games and stuff used to be on "Disc 1", the 465.71 GB of what is now showing as unallocated space.

    Read the article

  • How to update the hard disk device drivers for a ghosted hard drive image so it can run on different hardware: Ultra ATA > SATA

    - by rism
    I've ghosted a Winxp machine from one laptop with Ultra ATA drive, and would like to set it up on another laptop as a multiboot option on another hard driver with a SATA drive. I can install the partition fine but if i make it active and try to boot it it blue screens. The blue screen is so fast i cant even read it, other than to make out it's saying "something", im picking probably hard drive as it goes through POST fine. So basically i would like to boot into my Win7 OS, and then somehow manipulate the XP partition to use updated drivers for the new hard drive/laptop so that i can then at least boot into the XP OS on the new machine and update all the other drivers in safe mode or whatever to get it to run. I assume someone is going to tell me to just do a fresh install, but that kinda defeats the purpose of ghosting at this point. There is a significant amount of personalisation, development setup on the XP machine that i would like to just transfer as is. As it stands ive invested minmal time in getting it to run, just a ghost and recovery and then a blue screen boot or two, so its still well worth it to me, time wise to try this way. Thanks.

    Read the article

  • Data recovery on a data HDD (no OS)

    - by aCuria
    I am helping a family member with a dead hard disk. It is a seagate 200Gb 3.5" HDD in one of those old-school external enclosures. The problem was that windows failed to detect the hard disk when plugged in through USB. I removed the hard disk from its enclosure, and plugged it into my desktop PC. The BIOS does detect it upon POST, but unfortunately windows 7 would refuse to boot. It will get stuck on the loading screen with the glowing windows logo. Safe mode doesn't help either. What options do I have before going for some professional data recovery? edit: Someone modified the Title to something completely different from what I was asking, i just changed it back. 1) 2 HDD drives, DiskA(Dead), DiskB(my OS disk) 2) when B is connected to my system, everything works fine 3) when A AND B is connected, failure to boot. POSTs fine, but windows wont load 4) A has NO OS, its PURE data. It came from an EXTERNAL HDD enclosure which doesnt belong to me, and im trying to do data recovery.

    Read the article

  • Why my internal hard disk can be ejected?

    - by Bear Bear
    I have 6 hard disks in my computer and one DVD. The disk that I connect to the 6th SATA port is a regular disk. But my Windows 7 64 bit shows it as a removable drive. I can eject my hard disk! Just like a pen drive. If I connect another disk to the 6th port, I can eject that disk too. So it has nothing to do with the physical disk, it must be something related to Windows or BIOS I don't understand why Windows 7 is seeing a normal hard disk as removable. In Computer Management - Disk Management, the disk looks identical to the others - there is nothing there to suggest the drive is different from the others. But in the tray I have the icon to eject it. The motherboard model is ASUS F2A85 V PRO FM2. All the disks are formatted normally, no Dynamic Disk, no RAID, nothing special. How can I tell Windows 7 to treat the disk exactly like the others, so it can't be ejected?

    Read the article

  • Hard Drive that was used before not detected or accessible in Windows 7

    - by Anders
    Hello SU: My PC crashed for some unknown reason, and I am still working on what caused that. However, I pulled my main (windows) drive from my computer and hooked it up to my roommate's machine and was able to pull the data I needed off of it (i.e. the drive is good). I hook up his drives as they were, I had to turn off his machine and unplug his secondary drive to hook mine up, boot his machine and there is no second drive available in windows explorer. I opened Device Manager to see if for some reason it's drive letter got un-assigned, but there is nothing listed in there except his primary hard drive, his optical drive and one other optical drive which I believe is the virtual drive Daemon Tools made. The drive shows up in the BIOS, however after I restarted his machine again it sits on the "Entering setup....." screen at the load window. The only thing I can think of is that may have messed with stuff is I used this tutorial to create a bootable XP install on a USB drive to install XP on my machine (I am 99% certain that the optical drive in my PC is broken) and maybe it used the other hard drive's letter for the USB drive for some reason, which doesn't make much sense since it was recognized it as a different drive letter before I started the process. It is possible that it used the secondary hard drive's letter for it's work, but once again I am uncertain. Where should I go from here? He his bound to wake up within the next several hours and will probably flip a lid if I cannot get some sort of handle on this. Any and all help is greatly appreciated. PS: Anyone who helps me get this situated has a beer or two on me, as long as you are in the greater metro Detroit area, or don't mind traveling a bit!

    Read the article

  • HP Laptop recognizes hard drive just long enough to install windows

    - by Joe
    I have an HP laptop, DV6500 (CTO). It refused to boot one day, so I ran some diagnostics (a friend lent me "Hirens Boot Disk", "UBCD" and "PC DR 6"). Everything passed, except for the hdd. I replaced the HDD with a used drive of unknown condition. Installed windows with no problems. Installed the wireless driver, tried to reboot ... no luck. So I went to Best Buy, bought a brand new Western Digital 320gb HDD. Put it in the machine, installed windows (vista home premium). Installed the wired networking driver. Tried to reboot. No luck. Put the first hdd back in the machine, reinstalled windows. Started to install some drivers, went to reboot, and the machine won't come back to life. Put the second hdd in the machine, rinse wash and repeat. I've replaced the memory, even though it passed diagnostics. Problem exists with both brand new memory, and old memory. The BIOS recognizes the hard drive. The computer freezes directly after the bios splash screen, and there is no hard drive activity light. I've tried two linux live distros (gentoo and ubuntu). Neither would run on this laptop, but will on a different HP laptop. UBCD and Hirens Boot Disk both ran, as did PC Doctor 6 which refuses to test anything (gets stuck at "enumerating hard disks"). Is there anything else I can try?

    Read the article

  • Installing Windows 7 from a USB Hard Drive.

    - by Mark Tomlin
    I have a Western Digital Passport External Hard Drive (320GB) that I want to partition to keep the data on, but use some of the free space to install Windows 7 onto my desktop computer. Microsoft has given me the Windows 7 Enterprise Edition ISO to download. I would like to take the External HD and partition it so I can fit the ISO image onto it. How would I go about doing this? Trying to use GParted to partition the external hard drive has caused a chicken or the egg problem. GParted can't see the drive unless it's mounted, and when it is mounted it will not allow me to do anything to the partition. When it's not mounted, GParted can't see the drive at all and as such can't do anything to the drive. Once the drive is correctly partition, how do I go about moving the ISO image Microsoft gave me to my USB External Hard Drive? Are there any special steps that I need to take? I am using Ubuntu 11.04 & GParted 0.7.0, on my Chromebook to do this. Any support would be appreciated.

    Read the article

  • Seagate 3TB hard drive loses format information

    - by Victor Bugarin
    I have a Windows 7x64 Ultimate, 6 GB memory, 1 TB HD. 3TB Barracuda XT HDD. The HDD is installed on a StarTech 4 bays external enclosure I had troubles so I converted to a GPT, created 1 partition and formatted as NTFS. The hard drive I can write and read to and from the hard drive but it will become unreadable at some point while I am copying files or after I have copied files to it. I have copied large Bluray movies and diverse video files, I have also copied 32 GB of pictures, and I have copied about 86 thousand music files in different formats. At some point the partition becomes unreadable and I have to format the partition again (all files lost) and I have to start the whole process again. At some point I have been unable to copy large ISO (Bluray movies) file images. I have partitioned the HDD in 2 partitions P1 - 2TB, P2 - 1TB and I have lost every single file in either partition the same way. I reformat the HDD and it seems fine. I have run seatools to check the hard drive and it reports to be OK. What gives?

    Read the article

  • How do I copy an existing hard disc to a new one so I can boot off the new disc?

    - by Brian Hooper
    I currently have a failing hard drive which is the only hard drive in the machine. I have just bought a new hard drive to replace it, and my plan is to copy the contents of the old drive onto the new one, and then replace the old drive in the machine with the new one. I presumably can't just copy the whole directory structure (or can I)? What do I need to do to manage this, assuming it is possible? Is there a utility to do this for me? (The old drive is hopefully good for a few more hours.) (I hope by this means to keep all the software and configuration files as they are, to avoid having to re-install everything. Can that be done?)

    Read the article

  • How to change ext4 Hard drive partion to NTFS for installing Windows xp?

    - by Sina
    I have a ubuntu in Root directory with separated Home directory. This is all my hard partition. I inserted xp cd to install it but I can't find any hard drive suggestion ! I decided to boot it by Gparted and change the Root directory to NTFS, I formatted it and run xp cd again. I can't find any hard drive too. I don't want to change all partitions because I don't want to lose my data on them. What should I do ?

    Read the article

  • Force copy files off CRC error filled hard drive

    - by TheLakersHighlights
    So I got a dying Western Digital hard drive here and I have a new Western Digital hard drive to transfer all the data to. I have the new HDD hooked up by a SATA to USB. I want to transfer all the pictures, etc to the new HDD. I am unable to because of the CRC error. I have ran chkdsk /f /r and it didnt work because the drive is just simply dying. What tool will let me bypass CRC and continue on with the copying? OS: Vista Home Prem. 32bit

    Read the article

  • External Hard-Drive Randomly Ejects; Stays On

    - by Kaleb F.
    My 250GB I/O Magic USB external hard-drive randomly disconnects / ejects from the computer after between 2-30 minutes of use. When this happens, the blinking activity light on the front of the hdd turns off; however, the disks can still be heard spinning. Unplugging & replugging in the USB does not reconnect the device and the activity light remains unlit. The only way to continue using it is to flip off then on the power switch of the hdd. The hard-drive was formatted with MBR partition table and 2 NTFS volumes. I recently tried switching to GUID with two Mac OS Extended (Journaled), but the problem remains. This error occurs with my new Macbook Pro with Snow Leopard as well as with my DELL E520 with Windows 7 Ultimate.

    Read the article

  • Why are they putting "processors" on hard drives?

    - by Celeritas
    What does it mean when they have a processor on the hard drive, how does it work, and what benfit does it have? I don't understand - the CPU is the processor and the hard drive transfers it's contents to RAM. Do have additional processors, preprocess the data some how? Here's some examples Western Digital WD Black WD1002FAEX 1TB "Dual processor speed" NETGEAR ReadyNAS 312 2-Bay Diskless Network Attached Storage "Dual-core Intel 2.1GHz processor and 2GB on-board memory" and routers now have processors too, why's that nescecary? I guess it sort of makes sense - some logic needs to happen for the packets to be read in to know which ports to send them out on, but why did old routers not need them? Example or wireless router with processor: "Dual-core processor"

    Read the article

  • IDE <-> SATA Adapter Issue - Hard Drive Not recognized

    - by nicorellius
    I was trying to use one of these IDE to SATA adapters (Syba SD-ADA50016 IDE/SATA Converter Bi-directional IDE to SATA) and I connected a working hard drive (Seagate Barracuda 500 GB SATA 3.5 Inch 7200 RPM Version 12 Desktop Internal Hard Drive ST3500418AS). I could get the drive to be recognized by the BIOS, but I couldn't boot a Linux disc or install to the drive. I tried to install pfSense to this drive and the install failed because the setup couldn't recognize the file. Has anyone heard of these adapters giving trouble and/or not working properly? I would like to be able to use this device for newer drives on older boards.

    Read the article

  • USB hard drive doesn't graceful power off after eject on Windows 7

    - by Sim
    I have a couple of Seagate FreeAgent Go external USB hard drives and would like them to gracefully power off after ejecting in Windows 7. With Windows XP a few seconds after they are ejected they gracefully power off. When ejecting them on Windows 7 they just stay on and have to be physically disconnected before they lose power. I have checked the hard drive removal policy and it is set to quick removal. I have also looked in the Seagate forums but I couldn't find any info on this so I thought I'd ask the SuperUser community on any ideas why the difference and how to get the same behaviour in Windows 7 as in XP? Update: I am finding that this also happens with USB thumb drives as well. My current theory is that there were changes to the driver model with Vista/Win 7 that haven't been reflected in the device drivers yet. So things that worked under XP don't under Win7 as the drivers haven't been updated for the new model. Does that sound right?

    Read the article

  • MS SQL Server and "No Hard Drive Space Left"

    - by bobber205
    Got a server running a document delivery system on it. The machine is running extremely poorly (Windows XP). I've checked the regular things, like doing a memtest (turned out fine) and trying to degraf the HDD (not needed). The only thing weird about this machine is that its running MSSQL server. And Symantec Anitvirus. (ugh) Sometimes the machine reports "No hard drive space left". I immediately look at the one hard drive at the machine and it still has 20 gigs left. Each and every time. Could MSSQL server cause this? Could this be tied to the machine's terrible performance? Thanks!

    Read the article

  • Ubuntu hard disk problem

    - by Henadzy
    Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

    Read the article

  • Ubuntu hard disk problem

    - by Henadzy
    Hello! I have got the error with a hard disk on Ubuntu 9.10. It slows down my system, applications have not been responding for a long time. But when I mount and use filesystem which placed on this hard disk at other computer it works properly. disk: SAMSUNG HD161HJ (SATA) syslog: Apr 25 00:28:25 vare6gin kernel: [ 885.773839] ata3.00: exception Emask 0x1 SAct 0x1e SErr 0x0 action 0x6 frozen Apr 25 00:28:25 vare6gin kernel: [ 885.773845] ata3.00: Ata error. fis:0x21 Apr 25 00:28:25 vare6gin kernel: [ 885.773861] ata3.00: cmd 60/08:08:3f:00:ad/00:00:10:00:00/40 tag 1 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773864] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773871] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773877] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773890] ata3.00: cmd 60/18:10:9f:6b:ed/00:00:0e:00:00/40 tag 2 ncq 12288 in Apr 25 00:28:25 vare6gin kernel: [ 885.773893] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773900] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773904] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773918] ata3.00: cmd 60/08:18:3f:5f:ed/00:00:0e:00:00/40 tag 3 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773921] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773927] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773932] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773946] ata3.00: cmd 60/08:20:67:c8:91/00:00:05:00:00/40 tag 4 ncq 4096 in Apr 25 00:28:25 vare6gin kernel: [ 885.773948] res 51/40:24:67:c8:91/40:00:05:00:00/40 Emask 0x9 (media error) Apr 25 00:28:25 vare6gin kernel: [ 885.773955] ata3.00: status: { DRDY ERR } Apr 25 00:28:25 vare6gin kernel: [ 885.773960] ata3.00: error: { UNC } Apr 25 00:28:25 vare6gin kernel: [ 885.773970] ata3: hard resetting link Apr 25 00:28:25 vare6gin kernel: [ 885.773974] ata3: nv: skipping hardreset on occupied port Apr 25 00:28:25 vare6gin kernel: [ 886.240073] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Apr 25 00:28:25 vare6gin kernel: [ 886.256277] ata3.00: configured for UDMA/133 Apr 25 00:28:25 vare6gin kernel: [ 886.256305] ata3: EH complete Apr 25 00:28:27 vare6gin kernel: [ 888.176088] ata3: EH in SWNCQ mode,QC:qc_active 0xF sactive 0xF Apr 25 00:28:27 vare6gin kernel: [ 888.176099] ata3: SWNCQ:qc_active 0xF defer_bits 0x0 last_issue_tag 0x3 Apr 25 00:28:27 vare6gin kernel: [ 888.176102] dhfis 0xF dmafis 0x1 sdbfis 0x0 Apr 25 00:28:27 vare6gin kernel: [ 888.176109] ata3: ATA_REG 0x51 ERR_REG 0x40 Apr 25 00:28:27 vare6gin kernel: [ 888.176113] ata3: tag : dhfis dmafis sdbfis sacitve Apr 25 00:28:27 vare6gin kernel: [ 888.176120] ata3: tag 0x0: 1 1 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176126] ata3: tag 0x1: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176131] ata3: tag 0x2: 1 0 0 1 Apr 25 00:28:27 vare6gin kernel: [ 888.176136] ata3: tag 0x3: 1 0 0 1

    Read the article

  • Win 2008 R2 Server Not Recognizing Second Hard Drive

    - by Brian
    Hello, I just purchased a Dell server, which has two hard drives and no RAID setup. I can only currently see one hard drive... not sure how to get it to recognize the other, as I thought being a new machine that wouldn't be an issue. It has Windows Server 2008 R2 that I loaded on. I'm a n00b to all of this so I'm not sure why this is failing to work... Any help appreciated. Thanks.

    Read the article

  • Formatted mac external hard drive loaded on pc

    - by kjokay
    I have an issue where it appears that an external hard drive which had been formatted on a mac system was loaded as a drive in Windows. Windows is obviously unable to read the data and now the drive won't mount in the mac. It appears that Windows overwrote something concerning the drive's information on what filesystems and types it has on it. Mac diskutility is unable to repair the drive and the partition is showing up in the utility as a FAT32. Using an applexsoft utility, I am able to verify the data is still on this drive, but I'd rather not spend $100 to save these files (its not my hard drive anyways). Is there a way I can use some UNIX commands to find out the partition information on the drive, back the raw data up on it, then restore the data back onto the drive after re-formatting it again?

    Read the article

  • Hard drive failure during a move

    - by user52141
    So, odd situation here... I shipped a computer via UPS. The computer was well protected, wrapped in multiple layers of padding and tightly packed to minimize any chance of damage. The package arrived in great condition, no damage to the box at all - it looks like it was handled with utmost care. (And given it was shipped 2nd day express and cost $200 to ship, it had better have been) However, upon unpacking it and turning it on... suddenly the computer is telling us there is no boot device. I've checked everything I can think of and everything points to complete and utter hard drive failure. So - what on earth could cause hard drive failure during shipping?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >