Search Results

Search found 1218 results on 49 pages for 'optimal'.

Page 8/49 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Simple vs Complex (but performance efficient) solution - which one to choose and when?

  - by ManojGumber

  I have been programming for a couple of years and have often found myself at a dilemma. There are two solutions - one is simple one i.e. simple approach, easier to understand and maintain. It involves some redundancy, some extra work (extra IO, extra processing) and therefore is not the most optimal solution. but other uses a complex approach,difficult to implement, often involving interaction between lot of modules and is a performance efficient solution. Which solution should I strive for when I do not have hard performance SLA to meet and even the simple solution can meet the performance SLA? I have felt disdain among my fellow developers for simple solution. Is it good practice to come up with most optimal complex solution if your performance SLA can be met by a simple solution?

  Read the article

• Ubuntu 12.04.1 LTS USB not being detected after formatting with Startup Disk Creator

  - by Zach

  sudo fdisk -l lists the drive, however, I cannot find it in the file explorer. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d871e Device Boot Start End Blocks Id System /dev/sda1 * 2048 486322175 243160064 83 Linux /dev/sda2 486324222 488396799 1036289 5 Extended /dev/sda5 486324224 488396799 1036288 82 Linux swap / Solaris Disk /dev/sdb: 8195 MB, 8195480064 bytes 253 heads, 62 sectors/track, 1020 cylinders, total 16006797 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027ae4 Device Boot Start End Blocks Id System /dev/sdb1 * 62 15999719 M 7999829 c W95 FAT32 (LBA) Manually mounting it produces this error message :~$ sudo mount -t vfat /dev/sdb1 /media/external -ouiduid=1000,gid=1000,utf8,dmask=027,fmask=137 mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Is the usb toast?

  Read the article

• Emailing Interviewer after interview regarding technical solution

  - by Raghav Shankar

  I had an interview yesterday where I was given a programming problem and I was asked to figure the optimal solution for it. I gave a solution that worked in linear time, but used 2 loops (not inner loops). At the end of the interview, the interviewer saw I was interested in solving the problem, so he said the optimal solution uses only one loop and has linear complexity and at the end of the interview I had asked for his card and he gave one to me. I think I might have figured out a solution and I was wondering if it's alright to email the recruiter thanking him for his time and also mentioning about the solution I had figured out?

  Read the article

• How to access files on a drive from an older system, mounted in a new system?

  - by David Thomas

  I've recently built a new system, after a rather large physical injury was sustained by my previous system (a precarious balance, and gravity, were not a happy mix). Surprisingly the /home drive of that system appears to have more-or-less survived the trauma. However... I decided to use a fresh drive for / (and swap) partition(s), and another fresh drive for the new /home. Now that's working, I decided to install the old /home drive (that I had assumed until now would be entirely dead and without capacity for use) into the new system to recover the files and data (so far as is possible). At this point I've run into a snag: I have no idea how to go about this (with Windows it was relatively easy, the new drive would be the latest character of the alphabet, and go from there). With 'disk utility' (System - Administration - Disk Utitlity) I've worked out which drive it is (/dev/sda) but clicking on 'mount' produces an error: 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on / mount failed ...if it is mounted on / I can't see it. I'm also moderately confused by the disk (device /dev/sda) being referred to as /dev/sdb1. Any and all insights would be incredibly welcome (I've already voted for: Idea #9063: New internal hard drives default automount at Brainstorm). Edited in response to Roland's request for a screenshot of disk utility: Details (so far as I know them): 40GB disk is / and swap, 1.0 TB Samsung is /home 1.0 TB Hitachi is from the old system (and was the old /home drive). Output from sudo fdisk -l pasted below: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bef00 Device Boot Start End Blocks Id System /dev/sda1 1 121601 976760001 83 Linux Disk /dev/sdb: 40.0 GB, 40018599936 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00037652 Device Boot Start End Blocks Id System /dev/sdb1 * 1 4742 38084608 83 Linux /dev/sdb2 4742 4866 993281 5 Extended /dev/sdb5 4742 4866 993280 82 Linux swap / Solaris Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e8d46 Device Boot Start End Blocks Id System /dev/sdc1 1 121602 976760832 83 Linux

  Read the article

• How to implement an intelligent enemy in a shoot-em-up?

  - by bummzack

  Imagine a very simple shoot-em-up, something we all know: You're the player (green). Your movement is restricted to the X axis. Our enemy (or enemies) is at the top of the screen, his movement is also restricted to the X axis. The player fires bullets (yellow) at the enemy. I'd like to implement an A.I. for the enemy that should be really good at avoiding the players bullets. My first idea was to divide the screen into discrete sections and assign weights to them: There are two weights: The "bullet-weight" (grey) is the danger imposed by a bullet. The closer the bullet is to the enemy, the higher the "bullet-weight" (0..1, where 1 is highest danger). Lanes without a bullet have a weight of 0. The second weight is the "distance-weight" (lime-green). For every lane I add 0.2 movement cost (this value is kinda arbitrary now and could be tweaked). Then I simply add the weights (white) and go to the lane with the lowest weight (red). But this approach has an obvious flaw, because it can easily miss local minima as the optimal place to go would be simply between two incoming bullets (as denoted with the white arrow). So here's what I'm looking for: Should find a way through bullet-storm, even when there's no place that doesn't impose a threat of a bullet. Enemy can reliably dodge bullets by picking an optimal (or almost optimal) solution. Algorithm should be able to factor in bullet movement speed (as they might move with different velocities). Ways to tweak the algorithm so that different levels of difficulty can be applied (dumb to super-intelligent enemies). Algorithm should allow different goals, as the enemy doesn't only want to evade bullets, he should also be able to shoot the player. That means that positions where the enemy can fire at the player should be preferred when dodging bullets. So how would you tackle this? Contrary to other games of this genre, I'd like to have only a few, but very "skilled" enemies instead of masses of dumb enemies.

  Read the article

• Multiple Vertex Buffers per Mesh

  - by Daniel

  I've run into the situation where the size of my mesh with all its vertices and indices, is larger than the (optimal) vertex buffer object upper limit (~8MB). I was wondering if I can sub-divide the mesh across multiple vertex buffers, and somehow retain validity of the indices. Ie a triangle with a indice at the first vertex, and an indice at the last (ie in seperate VBOs). All the while maintaining this within Vertex Array Objects. My thoughts are, save myself the hassle, and for meshes (messes :P) such as this, just use the necessary size ( 8MB); which is what I do at the moment. But ideally my buffer manager (wip) at the moment is using optimal sizes; I may just have to make a special case then... Any ideas? If necessary, a simple C++ code example is appreciated. Note: I have also cross-posted this on stackoverflow, as I was not sure as to which it would be more suitable (its partly a design question).

  Read the article

• Strategy/algorithm to divide fair teams based on history

  - by Vegar

  We are a group of people playing floorball together on a regular basis. Every session starts with the daunting task of dividing teams... So what would be better than an application to pick teams automatically? So, given a history of team-combinations and results, and a list of people showing up for this particular session, what would be a good strategy to find the optimal teams? By optimal, I mean teams as equal as possible. Any ideas? Edit: To make it clear, the date that I have to base the picking on, would be something like this: [{ team1: ["playerA", "playerB", "playerC"], team2: ["playerD", "playerE", "playerF"], goals_team1: 10, goals_team2: 8 }, { team1: ["playerD", "playerB", "playerC"], team2: ["playerA", "playerE", "playerG"], goals_team1: 2, goals_team2: 5 }, { team1: ["playerD", "playerB", "playerF"], team2: ["playerA", "playerE", "playerC"], goals_team1: 4, goals_team2: 2 }]

  Read the article

• external USB HD doesn't show up on 'sudo fdisk -l' on one Ubuntu, shows up on another (both 'precise')

  - by Menelaos

  I have a 1.5TB WD external USB HDD and two Ubuntu systems, both 'precise'. When I plug the disk on system A it doesn't show up on the output of sudo fdisk -l nor is it automatically mounted (note that that wasn't always the case - it used to appear in the past). When I plug it on system B (again Ubuntu precise) it shows up when I do a sudo fdisk -l (output appended at the end) and mounts automatically just fine. What does this discrepancy point to and what kind of diagnostics should I run / tools I should use to troubleshoot the problem? I followed the suggestion I received to do a sudo tail -f /var/log/syslog and the output is the following when I plug, unplug and replug the USB cable on System A: Sep 14 23:27:09 thorin mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:27:09 thorin mtp-probe: bus: 2, device: 3 was not an MTP device Sep 14 23:28:01 thorin kernel: [ 338.994295] usb 2-2: USB disconnect, device number 3 Sep 14 23:28:04 thorin kernel: [ 341.808139] usb 2-2: new high-speed USB device number 4 using ehci_hcd Sep 14 23:28:04 thorin mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:13.2/usb2/2-2" Sep 14 23:28:04 thorin mtp-probe: bus: 2, device: 4 was not an MTP device Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting due to inactivity Sep 14 23:29:54 thorin AptDaemon: INFO: Quitting was requested (I guess the last two message are irrelevant). Output of sudo fdisk -l on System B $ sudo fdisk -l Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00070db4 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2905114623 1452556288 83 Linux /dev/sda2 2905116670 2930276351 12579841 5 Extended /dev/sda5 2905116672 2930276351 12579840 82 Linux swap / Solaris Disk /dev/sdb: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9c849c84 Device Boot Start End Blocks Id System /dev/sdb1 * 63 488375999 244187968+ 7 HPFS/NTFS/exFAT Disk /dev/sdg: 1500.3 GB, 1500299395072 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930272256 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003e17f Device Boot Start End Blocks Id System /dev/sdg1 2048 2930272255 1465135104 7 HPFS/NTFS/exFAT

  Read the article

• Why don't I have the option ''Install Ubuntu alongside with them''

  - by almqgh

  Why dont I have this option? here are my disk sudo fdisk -l Disk /dev/sda: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5b53cc54 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 1153767021 576678711 7 HPFS/NTFS/exFAT /dev/sda3 1216962560 1250050047 16543744 7 HPFS/NTFS/exFAT /dev/sda4 1250050048 1250261679 105816 c W95 FAT32 (LBA) Disk /dev/sdb: 4005 MB, 4005527552 bytes 32 heads, 63 sectors/track, 3880 cylinders, total 7823296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x20d8782d Device Boot Start End Blocks Id System /dev/sdb1 * 63 7822079 3911008+ c W95 FAT32 (LBA)

  Read the article

• Ubuntu 12.04 USB (HP)

  - by xShadoWolf

  I have put ubuntu 12.04 on a USB (Kingston 8GB) and I go to install and I can't it gives options for erase and something else I have 4 primary partitions win7 for my main partition and 3 created by HP HP_TOOLS, HP_RECOVERY and SYSTEM To get to my point how do I install ubuntu on HDD I have a HP probook 200 notebook PC. Can I remove any partitions? When I do sudo fdisk -l This Comes Up Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x3ed7e7b0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 409599 203776 7 HPFS/NTFS/exFAT /dev/sda2 409600 946591743 473091072 7 HPFS/NTFS/exFAT /dev/sda3 946591744 976560127 14984192 7 HPFS/NTFS/exFAT /dev/sda4 976560128 976771119 105496 c W95 FAT32 (LBA) Disk /dev/sdb: 7803 MB, 7803174912 bytes 122 heads, 58 sectors/track, 2153 cylinders, total 15240576 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 8064 15240575 7616256 c W95 FAT32 (LBA)

  Read the article

• Is an extra collision-mesh for level-data worth the hassle?

  - by Serthy

  What is the optimal approach for collision-detection with the environment in an 3D engine (with triangle mesh based geometry, no bsp)? A) Use the render mesh [+] no need for additional work for artists to fiddle with collision detection [-] high detail is harder for physics calculation [+/-] maybe use collidable flags for materials [+/-] compute the collision-mesh from the render-mesh B) Use an additional collision mesh [+] faster/more optimal collision-detection [-] additional work (either by the artist or by the programmer who has to develop an algorithm to compute it from the render-mesh) [-] more memory useage How do AAA title handle this? And what are the indie dev's approaches?

  Read the article

• No Windows Option on Boot

  - by Okoning

  I've installed Ubuntu alongside Windows but at first didn't have a boot option menu. So, I installed bootrepair and ran it. This succeeded in granting me a GRUB boot option menu, but Windows isn't on it. Here is the bootrepair report: http://paste.ubuntu.com/8098527 Can anyone tell me what might be wrong? EDIT: I ran sudo fdisk -l and this is the output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00023fe0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 960096255 480047104 83 Linux /dev/sda2 960098302 976771071 8336385 5 Extended /dev/sda5 960098304 976771071 8336384 82 Linux swap / Solaris Disk /dev/sdb: 32.0 GB, 32015679488 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 * 32 62530623 31265296 c W95 FAT32 (LBA)

  Read the article

• Re-sizing disk partition linux/vm

  - by Tiffany Walker

  I VM Player running a linux guest and I was wanting to know how do I expand the disk? In the VM player I gave more disk space but I am not sure how to mount/expand/connect the new disk space to the system. My old disk space was 14GB [root@localhost ~]# df -h / Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup-lv_root 14G 4.5G 8.2G 36% / Then I expanded it and now I see sda2 which is the new space? [root@localhost ~]# fdisk -l Disk /dev/sda: 128.8 GB, 128849018880 bytes 255 heads, 63 sectors/track, 15665 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000cd44d Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 2611 20458496 8e Linux LVM Disk /dev/mapper/VolGroup-lv_root: 14.5 GB, 14537457664 bytes 255 heads, 63 sectors/track, 1767 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/VolGroup-lv_swap: 6408 MB, 6408896512 bytes 255 heads, 63 sectors/track, 779 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Do I need to mount the new space first? resize2fs -p /dev/mapper/VolGroup-lv_root 108849018880 resize2fs 1.41.12 (17-May-2010) The containing partition (or device) is only 3549184 (4k) blocks. You requested a new size of 1474836480 blocks. resize2fs -p /dev/mapper/VolGroup-lv_root 128849018880 resize2fs 1.41.12 (17-May-2010) resize2fs: Invalid new size: 128849018880 [root@localhost ~]# lvextend -L+90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 103.54 GiB Insufficient free space: 23040 extents needed, but only 0 available [root@localhost ~]# lvextend -L90GB /dev/mapper/VolGroup-lv_root Extending logical volume lv_root to 90.00 GiB Insufficient free space: 19574 extents needed, but only 0 available EDIT: So after trying pvcreate/vgextend nothing has so far worked. I'm guessing the new disk space added from VM Player is not showing up? pvscan PV /dev/sda2 VG VolGroup lvm2 [19.51 GiB / 0 free] Total: 1 [19.51 GiB] / in use: 1 [19.51 GiB] / in no VG: 0 [0 ]

  Read the article

• How do I copy files between harddrives on Ubuntu CLI?

  - by ed209

  I have a dedicated server with a 120gb main ssd. The server happens to come with a couple of 3000GB hard drives. I'd like to use them to back up my main drive. Preferably, I'd like one as an exact copy of the main SSD and the other with incremental backups of the mysql database and a user uploads file. These are the drives I have Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2e18 Device Boot Start End Blocks Id System /dev/sda1 2048 4196352 2097152+ 83 Linux /dev/sda2 4198400 5246976 524288+ 83 Linux /dev/sda3 5249024 234441647 114596312 83 Linux Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table The first problem I have, is that I have no idea how to copy from one drive to another. Kind of embarrassing I know, but I don't know where to start. I'm thinking of this in terms of Mac OS cli where I'm able to copy between /Volumes - is there an equivalent? (there is nothing under /mnt or /media)

  Read the article

• Disk doesn't contain a valid partition table

  - by Jeevan Dongre

  I was running a m1.small instance ec2 ubuntu instance. I was running out of disk space, so I upgraded my instance to medium. When I upgraded I actually got 429.5 GB of space and after that I added 10 gb of volume too. When I run the "sudo fdisk -l" command I got this results. Disk /dev/sda1: 8589 MB, 8589934592 bytes 255 heads, 63 sectors/track, 1044 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 429.5 GB, 429461078016 bytes 255 heads, 63 sectors/track, 52212 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda2 doesn't contain a valid partition table Disk /dev/sdf: 10.7 GB, 10737418240 bytes 255 heads, 63 sectors/track, 1305 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 sda1 is the primary parition and sda2 is what I got added upgrading my system to medium. But the problem persists, I am not able to pull the code from git, it is giving me this error. remote: Counting objects: 409, done. remote: Compressing objects: 100% (236/236), done. fatal: write error: No space left on device fatal: index-pack failed

  Read the article

• Packing differently sized chunks of data into multiple bins

  - by knizz

  EDIT: It seems like this problem is called "Cutting stock problem" I need an algorithm that gives me the (space-)optimal arrangement of chunks in bins. One way would be put the bigger chunks in first. But see how that algorithm fails in this example: Chunks Bins ----------------------------- AAA BBB CC DD ( ) ( ) Algorithm Result ----------------------------- biggest first (AAABBB ) (CC ) optimal (AAACCDD) (BBB) "Biggest first" can't fit in DD. Maybe it helps to build a table like this: Size 1: --- Size 2: CC, DD Size 3: AAA, BBB Size 4: CCDD Size 5: AAACC, AAADD, BBBCC, BBBDD Size 6: AAABBB Size 7: AAACCDD, BBBCCDD Size 8: AAABBBCC, AAABBBDD Size 10: AAABBBCCDD

  Read the article

• list of uids / names of System Preferences > Accounts

  - by neoneye

  How can I obtain an array with uid and names? I could iterate from 0 to 99999 and do a getpwnam(). However most machines have less than 5 accounts, so it's not optimal. I don't know what framework is responsible for this and thus I have no clue what to search for. Is there a more optimal solution that can traverse the accounts?

  Read the article

• Sorting a list of numbers with modified cost

  - by David

  First, this was one of the four problems we had to solve in a project last year and I couldn’t find a suitable algorithm so we handle in a brute force solution. Problem: The numbers are in a list that is not sorted and supports only one type of operation. The operation is defined as follows: Given a position i and a position j the operation moves the number at position i to position j without altering the relative order of the other numbers. If i j, the positions of the numbers between positions j and i - 1 increment by 1, otherwise if i < j the positions of the numbers between positions i+1 and j decreases by 1. This operation requires i steps to find a number to move and j steps to locate the position to which you want to move it. Then the number of steps required to move a number of position i to position j is i+j. We need to design an algorithm that given a list of numbers, determine the optimal (in terms of cost) sequence of moves to rearrange the sequence. Attempts: Part of our investigation was around NP-Completeness, we make it a decision problem and try to find a suitable transformation to any of the problems listed in Garey and Johnson’s book: Computers and Intractability with no results. There is also no direct reference (from our point of view) to this kind of variation in Donald E. Knuth’s book: The art of Computer Programing Vol. 3 Sorting and Searching. We also analyzed algorithms to sort linked lists but none of them gives a good idea to find de optimal sequence of movements. Note that the idea is not to find an algorithm that orders the sequence, but one to tell me the optimal sequence of movements in terms of cost that organizes the sequence, you can make a copy and sort it to analyze the final position of the elements if you want, in fact we may assume that the list contains the numbers from 1 to n, so we know where we want to put each number, we are just concerned with minimizing the total cost of the steps. We tested several greedy approaches but all of them failed, divide and conquer sorting algorithms can’t be used because they swap with no cost portions of the list and our dynamic programing approaches had to consider many cases. The brute force recursive algorithm takes all the possible combinations of movements from i to j and then again all the possible moments of the rest of the element’s, at the end it returns the sequence with less total cost that sorted the list, as you can imagine the cost of this algorithm is brutal and makes it impracticable for more than 8 elements. Our observations: n movements is not necessarily cheaper than n+1 movements (unlike swaps in arrays that are O(1)). There are basically two ways of moving one element from position i to j: one is to move it directly and the other is to move other elements around i in a way that it reaches the position j. At most you make n-1 movements (the untouched element reaches its position alone). If it is the optimal sequence of movements then you didn’t move the same element twice.

  Read the article

• Increase samba space on open suse 12.1

  - by Kapil Sharma

  I know linux basics but not an expert. IT guy left the job here and there is some time before new hire. So sorry if question is very basic. We have local testing server based on Open SUSE 12.1, which also act as shared drive between dev/mgmt team here and using Samba for that. Now we are running out of space on samba, even though server's 2*1TB harddisk is nearly 90% free. My question is, what is limiting Samba and how can I increase its limit? We need around at least 500 GB as shared drive but currently its just 25 GB. I don't need step by step answer, just a link to any helpful article would be sufficient. Probably I'm putting wrong keywords in google so not getting any helpful link. EDIT: Output of commands in the first comment. All commands were run as root user df -h (getting error with df -ht) Filesystem Size Used Avail Use% Mounted on rootfs 30G 5.1G 23G 19% / devtmpfs 2.0G 36K 2.0G 1% /dev tmpfs 2.0G 1.1M 2.0G 1% /dev/shm tmpfs 2.0G 676K 2.0G 1% /run /dev/sda2 30G 5.1G 23G 19% / tmpfs 2.0G 0 2.0G 0% /sys/fs/cgroup tmpfs 2.0G 676K 2.0G 1% /var/run tmpfs 2.0G 0 2.0G 0% /media tmpfs 2.0G 676K 2.0G 1% /var/lock /dev/sda3 36G 31G 3.3G 91% /home fdisk -l /dev/[hmsv]d* Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x2d4a2d49 Device Boot Start End Blocks Id System /dev/sda1 2048 16771071 8384512 82 Linux swap / Solaris /dev/sda2 * 16771072 79681535 31455232 83 Linux /dev/sda3 79681536 156301311 38309888 83 Linux Disk /dev/sda1: 8585 MB, 8585740288 bytes 255 heads, 63 sectors/track, 1043 cylinders, total 16769024 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda1 doesn't contain a valid partition table Disk /dev/sda2: 32.2 GB, 32210157568 bytes 255 heads, 63 sectors/track, 3915 cylinders, total 62910464 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System Disk /dev/sda3: 39.2 GB, 39229325312 bytes 255 heads, 63 sectors/track, 4769 cylinders, total 76619776 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/sda3 doesn't contain a valid partition table vgs No volume groups found lvs No volume groups found output of vi /etc/samba/smb.conf # smb.conf is the main Samba configuration file. You find a full commented # version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the # samba-doc package is installed. # Date: 2011-11-02 [global] workgroup = WORKGROUP passdb backend = tdbsam printing = cups printcap name = cups printcap cache time = 750 cups options = raw map to guest = Bad User include = /etc/samba/dhcp.conf logon path = \\%L\profiles\.msprofile logon home = \\%L\%U\.9xprofile logon drive = P: usershare allow guests = Yes [homes] comment = Home Directories valid users = %S, %D%w%S browseable = No read only = No inherit acls = Yes [profiles] comment = Network Profiles Service path = %H read only = No store dos attributes = Yes create mask = 0600 directory mask = 0700 [users] comment = All users path = /home read only = No inherit acls = Yes veto files = /aquota.user/groups/shares/ [groups] comment = All groups path = /home/groups read only = No inherit acls = Yes [printers] comment = All Printers path = /var/tmp printable = Yes create mask = 0600 browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/drivers write list = @ntadmin root force group = ntadmin create mask = 0664 directory mask = 0775 [allusers] comment = All Users path = /home/shares/allusers valid users = @users force group = users create mask = 0660 directory mask = 0771 writable = yes

  Read the article

• Setup access to SAS RAID drives with NTFS partitions on CentOS Machine

  - by Quanano

  We have a Dell Poweredge 2900 system with Adaptec 39320A SCSI CONTROLLER CARD and 4 SAS hard drives attached, with NTFS partitions on them. We installed CentOS on the other raid array with a different controller and it is working fine. We are now trying to access the drives shown above and they are not being shown in /dev as sdb, etc. sda is the drive that we installed centos on and it has sda1, sda2, sda3, etc. The CDROM has been picked up as well. If I scan for scsi devices then the perc and adaptec controllers are both found. sg0 is the CDROM and sg2 is the centos installed, however I think sg1 is the other drive but I cannot see anyway to mount the partitions, as only the drive is listed in /dev. Thanks. EXTRA INFO fdisk -l Disk /dev/sda: 72.7 GB, 72746008576 bytes 255 heads, 63 sectors/track, 8844 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x11e3119f Device Boot Start End Blocks Id System /dev/sda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/sda2 64 8845 70528000 8e Linux LVM Disk /dev/mapper/vg_lal2server-lv_root: 34.4 GB, 34431041536 bytes 255 heads, 63 sectors/track, 4186 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_root doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_swap: 21.1 GB, 21139292160 bytes 255 heads, 63 sectors/track, 2570 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_swap doesn't contain a valid partition table Disk /dev/mapper/vg_lal2server-lv_home: 16.6 GB, 16647192576 bytes 255 heads, 63 sectors/track, 2023 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_lal2server-lv_home doesn't contain a valid partition table These are all from the install hdd not the additional hard drives modprobe a320raid FATAL: Module a320raid not found. lsscsi -v [0:0:0:0] cd/dvd TSSTcorp CDRWDVD TS-H492C DE02 /dev/sr0 dir: /sys/bus/scsi/devices/0:0:0:0 [/sys/devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0] [4:0:10:0] enclosu DP BACKPLANE 1.05 - dir: /sys/bus/scsi/devices/4:0:10:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:0:10/4:0:10:0] [4:2:0:0] disk DELL PERC 5/i 1.03 /dev/sda dir: /sys/bus/scsi/devices/4:2:0:0 [/sys/devices/pci0000:00/0000:00:05.0/0000:01:00.0/0000:02:0e.0/host4/target4:2:0/4:2:0:0] . lsmod Module Size Used by fuse 66285 0 des_generic 16604 0 ecb 2209 0 md4 3461 0 nls_utf8 1455 0 cifs 278370 0 autofs4 26888 4 ipt_REJECT 2383 0 ip6t_REJECT 4628 2 nf_conntrack_ipv6 8748 2 nf_defrag_ipv6 12182 1 nf_conntrack_ipv6 xt_state 1492 2 nf_conntrack 79453 2 nf_conntrack_ipv6,xt_state ip6table_filter 2889 1 ip6_tables 19458 1 ip6table_filter ipv6 322029 31 ip6t_REJECT,nf_conntrack_ipv6,nf_defrag_ipv6 bnx2 79618 0 ses 6859 0 enclosure 8395 1 ses dcdbas 9219 0 serio_raw 4818 0 sg 30124 0 iTCO_wdt 13662 0 iTCO_vendor_support 3088 1 iTCO_wdt i5000_edac 8867 0 edac_core 46773 3 i5000_edac i5k_amb 5105 0 shpchp 33482 0 ext4 364410 3 mbcache 8144 1 ext4 jbd2 88738 1 ext4 sd_mod 39488 3 crc_t10dif 1541 1 sd_mod sr_mod 16228 0 cdrom 39771 1 sr_mod megaraid_sas 77090 2 aic79xx 129492 0 scsi_transport_spi 26151 1 aic79xx pata_acpi 3701 0 ata_generic 3837 0 ata_piix 22846 0 radeon 1023359 1 ttm 70328 1 radeon drm_kms_helper 33236 1 radeon drm 230675 3 radeon,ttm,drm_kms_helper i2c_algo_bit 5762 1 radeon i2c_core 31276 4 radeon,drm_kms_helper,drm,i2c_algo_bit dm_mirror 14101 0 dm_region_hash 12170 1 dm_mirror dm_log 10122 2 dm_mirror,dm_region_hash dm_mod 81500 11 dm_mirror,dm_log

  Read the article

• SQL SERVER – Video – Beginning Performance Tuning with SQL Server Execution Plan

  - by pinaldave

  Traveling can be most interesting or most exhausting experience. However, traveling is always the most enlightening experience one can have. While going to long journey one has to prepare a lot of things. Pack necessary travel gears, clothes and medicines. However, the most essential part of travel is the journey to the destination. There are many variations one prefer but the ultimate goal is to have a delightful experience during the journey. Here is the video available which explains how to begin with SQL Server Execution plans. Performance Tuning is a Journey Performance tuning is just like a long journey. The goal of performance tuning is efficient and least resources consuming query execution with accurate results. Just as maps are the most essential aspect of performance tuning the same way, execution plans are essentially maps for SQL Server to reach to the resultset. The goal of the execution plan is to find the most efficient path which translates the least usage of the resources (CPU, memory, IO etc). Execution Plans are like Maps When online maps were invented (e.g. Bing, Google, Mapquests etc) initially it was not possible to customize them. They were given a single route to reach to the destination. As time evolved now it is possible to give various hints to the maps, for example ‘via public transport’, ‘walking’, ‘fastest route’, ‘shortest route’, ‘avoid highway’. There are places where we manually drag the route and make it appropriate to our needs. The same situation is with SQL Server Execution Plans, if we want to tune the queries, we need to understand the execution plans and execution plans internals. We need to understand the smallest details which relate to execution plan when we our destination is optimal queries. Understanding Execution Plans The biggest challenge with maps are figuring out the optimal path. The same way the  most common challenge with execution plans is where to start from and which precise route to take. Here is a quick list of the frequently asked questions related to execution plans: Should I read the execution plans from bottoms up or top down? Is execution plans are left to right or right to left? What is the relational between actual execution plan and estimated execution plan? When I mouse over operator I see CPU and IO but not memory, why? Sometime I ran the query multiple times and I get different execution plan, why? How to cache the query execution plan and data? I created an optimal index but the query is not using it. What should I change – query, index or provide hints? What are the tools available which helps quickly to debug performance problems? Etc… Honestly the list is quite a big and humanly impossible to write everything in the words. SQL Server Performance:  Introduction to Query Tuning My friend Vinod Kumar and I have created for the same a video learning course for beginning performance tuning. We have covered plethora of the subject in the course. Here is the quick list of the same: Execution Plan Basics Essential Indexing Techniques Query Design for Performance Performance Tuning Tools Tips and Tricks Checklist: Performance Tuning We believe we have covered a lot in this four hour course and we encourage you to go over the video course if you are interested in Beginning SQL Server Performance Tuning and Query Tuning. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology, Video Tagged: Execution Plan

  Read the article

• How to resize / enlarge / grow a non-LVM ext4 partition

  - by Mischa

  I have already searched the forums, but couldnt find a good suitable answer: I have an Ubuntu Server 10.04 as KVM Host and a guest system, that also runs 10.04. The host system uses LVM and there are three logical volumes, which are provided to the guest as virtual block devices - one for /, one for /home and one for swap. The guest had been partitioned without LVM. I have already enlarged the logical volume in the host system - the guest successfully sees the bigger virtual disk. However, this virtual disk contains one "good old" partition, which still has the old small size. The output of fdisk -l is me@produktion:/$ LC_ALL=en_US sudo fdisk -l Disk /dev/vda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000c8ce7 Device Boot Start End Blocks Id System /dev/vda1 * 1 3917 31455232 83 Linux Disk /dev/vdb: 2147 MB, 2147483648 bytes 244 heads, 47 sectors/track, 365 cylinders Units = cylinders of 11468 * 512 = 5871616 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2bf7 Device Boot Start End Blocks Id System /dev/vdb1 1 366 2095104 82 Linux swap / Solaris Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 32, 33) logical=(0, 43, 28) Partition 1 has different physical/logical endings: phys=(260, 243, 47) logical=(365, 136, 44) Disk /dev/vdc: 225.5 GB, 225485783040 bytes 255 heads, 63 sectors/track, 27413 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00027f25 Device Boot Start End Blocks Id System /dev/vdc1 1 9138 73398272 83 Linux The output of parted print all is Model: Virtio Block Device (virtblk) Disk /dev/vda: 32.2GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 32.2GB 32.2GB primary ext4 boot Model: Virtio Block Device (virtblk) Disk /dev/vdb: 2147MB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 2146MB 2145MB primary linux-swap(v1) Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 What I want to achieve is to simply grow or resize the partition /dev/vdc1 so that it uses the whole space provided by the virtual block device /dev/vdc. The problem is, that when I try to do that with parted, it complains: (parted) select /dev/vdc Using /dev/vdc (parted) print Model: Virtio Block Device (virtblk) Disk /dev/vdc: 225GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 75.2GB 75.2GB primary ext4 (parted) resize 1 WARNING: you are attempting to use parted to operate on (resize) a file system. parted's file system manipulation code is not as robust as what you'll find in dedicated, file-system-specific packages like e2fsprogs. We recommend you use parted only to manipulate partition tables, whenever possible. Support for performing most operations on most types of file systems will be removed in an upcoming release. Start? [1049kB]? End? [75.2GB]? 224GB Error: File system has an incompatible feature enabled. Compatible features are has_journal, dir_index, filetype, sparse_super and large_file. Use tune2fs or debugfs to remove features. So what can I do? This is a headless production system. What is a safe way to grow this partition? I CAN unmount it, though - so this is not the problem.

  Read the article

• Fresh Ubuntu Install - Grub not loading

  - by Ryan Sharp

  System Ubuntu 12.04 64-bit Windows 7 SP1 Samsung 64GB SSD - OS' Samsung 1TB HDD - Games, /Home, Swap WD 300'ishGB HDD - Backup Okay, so I'm very frustrated, so please excuse me if I miss anything out as my head is clouded by anger and impatience, etc. I'll try me best, though. First of all, I'll explain how I got to my predicament. I finally got my new SSD. I firstly installed Windows, which completed without a hitch. Afterwards, I tried to install Ubuntu, which failed several times due to problems irrelevant to this question, but I mention this to explain my frustrations, sorry. Anyway, I finally installed Ubuntu. However, I chose the 'bootloader' to be installed on the same partition as where I was installing the Ubuntu Root partition, as that was what I believed to be the best choice. It was of my thinking that it was supposed to go on the same partition and on the SSD, which is my OS drive, though with my problem, it apparently was wrong. So I tried to fix it by checking guides and following their directions, but seemed to have messed it up even more. Here is what I receive after I use the fdisk -l command: (I also added explanations for which I used each partition for) Disk /dev/sda: 64.0 GB, 64023257088 bytes 255 heads, 63 sectors/track, 7783 cylinders, total 125045424 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x324971d1 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 208896 48957439 24374272 7 HPFS/NTFS/exFAT /dev/sda3 48959486 125044735 38042625 5 Extended /dev/sda5 48959488 125044735 38042624 83 Linux sda1 --/ Windows Recovery sda2 --/ Windows 7 sda3/5 --/ Ubuntu root [ / ] Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc0ee6a69 Device Boot Start End Blocks Id System /dev/sdb1 1024208894 1953523711 464657409 5 Extended /dev/sdb3 * 2048 1024206847 512102400 7 HPFS/NTFS/exFAT /dev/sdb5 1024208896 1939851263 457821184 83 Linux /dev/sdb6 1939853312 1953523711 6835200 82 Linux swap / Solaris sdb3 --/ Partition for Steam games, etc. sdb5 --/ Ubuntu Home [ /home ] sdb6 --/ Ubuntu Swap Partition table entries are not in disk order Disk /dev/sdc: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x292eee23 Device Boot Start End Blocks Id System /dev/sdc1 2048 625141759 312569856 7 HPFS/NTFS/exFAT sdc1 --/ Generic backup I also used a Boot Script that other users suggested, so that I can give more details on my partitions and also where Grub is located... ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos5)/boot/grub on this drive. => Windows is installed in the MBR of /dev/sdc. Now that is weird... Why would Grub2 be installed on both my SSD and HDD? Even weirder is why is Windows on the MBR of my backup hard drive? Nothing I did should have done that... Anyway, here is the entire Output from that script... PASTEBIN So, to summarize what I need: How can I fix my setup so grub loads on startup? How can I clean my partitions to remove unnecessary grubs? What did I do wrong so that I don't do something so daft again? Thank you so much for reading, and I hope you can help me. I've been trying to have a successful setup since Friday, and I'm almost at the point that I'm really tempted to throw my computer out the window due to my frustration.

  Read the article

• E-Business Suite : Role of CHUNK_SIZE in Oracle Payroll

  - by Giri Mandalika

  Different batch processes in Oracle Payroll flow have the ability to spawn multiple child processes (or threads) to complete the work in hand. The number of child processes to fork is controlled by the THREADS parameter in APPS.PAY_ACTION_PARAMETERS view. THREADS parameter The default value for THREADS parameter is 1, which is fine for a single-processor system but not optimal for the modern multi-core multi-processor systems. Setting the THREADS parameter to a value equal to or less than the total number of [virtual] processors available on the system may improve the performance of payroll processing. However on the down side, since multiple child processes operate against the same set of payroll tables in HR schema, database may experience undesired consequences such as buffer busy waits and index contention, which results in giving up some of the gains achieved by using multiple child processes/threads to process the work. Couple of other action parameters, CHUNK_SIZE and CHUNK_SHUFFLE, help alleviate the database contention. eg., Set a value for THREADS parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'THREADS'; COMMIT; (I am not aware of any maximum value for THREADS parameter) CHUNK_SIZE parameter The size of each commit unit for the batch process is controlled by the CHUNK_SIZE action parameter. In other words, chunking is the act of splitting the assignment actions into commit groups of desired size represented by the CHUNK_SIZE parameter. The default value is 20, and each thread processes one chunk at a time -- which means each child process inserts or processes 20 assignment actions at any time. When multiple threads are configured, each thread picks up a chunk to process, completes the assignment actions and then picks up another chunk. This is repeated until all the chunks are exhausted. It is possible to use different chunk sizes in different batch processes. During the initial phase of processing, CHUNK_SIZE number of assignment actions are inserted into relevant table(s). When multiple child processes are inserting data at the same time into the same set of tables, as explained earlier, database may experience contention. The default value of 20 is mostly optimal in such a case. Experiment with different values for the initial phase by +/-10 for CHUNK_SIZE parameter and observe the performance impact. A larger value may make sense during the main processing phase. Again experimentation is the key in finding the suitable value for your environment. Start with a large value such as 2000 for the chunk size, then increment or decrement the size by 500 at a time until an optimal value is found. eg., Set a value for CHUNK_SIZE parameter as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = DESIRED_VALUE WHERE PARAMETER_NAME = 'CHUNK_SIZE'; COMMIT; CHUNK_SIZE action parameter accepts a value that is as low as 1 or as high as 16000. CHUNK SHUFFLE parameter By default, chunks of assignment actions are processed sequentially by all threads - which may not be a good thing especially given that all child processes/threads performing similar actions against the same set of tables almost at the same time. By saying not a good thing, I mean to say that the default behavior leads to contention in the database (in data blocks, for example). It is possible to relieve some of that database contention by randomizing the processing order of chunks of assignment actions. This behavior is controlled by the CHUNK SHUFFLE action parameter. Chunk processing is not randomized unless explicitly configured. eg., Set chunk shuffling as shown below. CONNECT APPS/APPS_PASSWORD UPDATE PAY_ACTION_PARAMETERS SET PARAMETER_VALUE = 'Y' WHERE PARAMETER_NAME = 'CHUNK SHUFFLE'; COMMIT; Finally I recommend checking the following document out for additional details and additional pay action tunable parameters that may speed up the processing of Oracle Payroll.     My Oracle Support Doc ID: 226987.1 Oracle 11i & R12 Human Resources (HRMS) & Benefits (BEN) Tuning & System Health Checks Also experiment with different combinations of parameters and values until the right set of action parameters and values are found for your deployment.

  Read the article

• Adaptec 5805 after reboot don't starting

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not included. It only works if the computer is shut down and turn off. Late i update firmware "Adaptec RAID 5805 Firmware Build 18948" How to fix the problem? add Log Configuration summary Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priorityHigh Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1 List item

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >