Search Results

Search found 267 results on 11 pages for 'prog sud'.

Page 8/11 | < Previous Page | 4 5 6 7 8 9 10 11  | Next Page >

• MySQL port 3306 became filtered when configured with Keepalived on Ubuntu server 12.04 lts

  - by Ludwig

  I'm configuring two load balancer (lb01 & lb02) with keepalived for my two mysql server (db01 & db02) with standard port 3306. There is virtual ip address (192.168.205.10) to access it also act as failover, but somehow the web server in the front can't access this mysql server using vip. Here is my config: Keepalived: Only the mysql part that i added here. LB01: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.4 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } LB02: virtual_server 192.168.205.10 3306 { delay_loop 6 lb_algo rr lb_kind DR protocol TCP real_server 192.168.205.6 3306 { weight 10 TCP_CHECK { connect_port 3306 connect_timeout 2 } } } I already comment out the "bind-address=127.0.0.1" part in both server my.cnf. Also, remove all the firewall prog from my ubuntu server (ufw or iptables). Any help? thanks.

  Read the article

• Problem with intel chipset 4 serie and centos dealing with dual head

  - by Antoine

  I've a fujitsu lifebook S7220, it's been a while since i try to configure it to use a dual head with centos 5.4 x86_64. Everytime I try, the xserver crash... I've got an intel chipset mobile 4 serie (GMA 4500MHD, if I recall good!) When I do an lspci -v i've got these : 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0, IRQ 177 Memory at f2000000 (64-bit, non-prefetchable) [size=4M] Memory at d0000000 (64-bit, prefetchable) [size=256M] I/O ports at 1800 [size=8] Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Capabilities: [d0] Power Management version 3 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) Subsystem: Fujitsu Limited. Unknown device 1451 Flags: bus master, fast devsel, latency 0 Memory at f2400000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 My question is, anyone already got this problem and how did you fix it? Thank you for your answer!

  Read the article

• Generating the escape sequences for terminal by ahk

  - by obeliksz

  I am trying to make an ahk for putty to send the keycodes that I want for some key combinations in order for my program to work over terminal too. For this I have an ahk already with some key combinations working properly by experimenting awfully much time from here and there, from key tables, etc but I still don't get, did not came up with a clear, logical method to calculate the escape key that I want. An example: ^F1::SendInput ^[O5P It gives 28 in my test prog. I see that for ^[1 I get 377 and for ^[2 376... and I see that there can be used letters out of the hexa numbers (A-F) and also ; and ~ or double [[ Do you understand how this works? Any good descriptive material for this? Thanks a lot!

  Read the article

• How do you find a new software to download?

  - by user63411

  I see that the most time on computer I loose just for searching a suitable software. How you do it? what is your way to find a software? you first go on Forum?, google? Which torrent site? which P2P prog.? website, server? my problem - my way is: For example: "I need a software that have function remote and also leaves you to copy and paste (drag and drop - file manage). And after few hours searching on Google I download LOGMEIN pro2, but than I see that is just trial. so if I need to find alternative I will spend another whole day Where to go? I am not big amateur but I need better system. I need better intorudction how to find what is the suitable software for you and where you can download it?

  Read the article

• Bundler doesn't want to install hpricot on Windows XP with Ruby 1.8.7

  - by Nick Gorbikoff

  Hello I develop on a Windows machine but deploy to Debian. Trying to use hpricot with Rails 3 app. I can get the gem to install using : gem install hpricot --platform=mswin32 But when I do this in the bundle file - it keeps throwing an error (I think it's trying to install the wrong version of hpricot (not windows specific) group :production do gem "hpricot", "0.8.3" end group :development, :test do gem "hpricot", "0.8.3", :platforms => [:mswin, :mingw] end This is from another question here on stackoverflow - but it's not working for me. Any ideas? P.S.: Windows XP sp3 with Ruby 1.8.7 with Rails 3.0.3 with bundler 1.0.7 EDIT Forgot to paste my error: bundle install Fetching source index for http://rubygems.org/ which: no sudo in (.;C:\Program Files\ImageMagick-6.6.5-Q16;C:\ruby\Ruby187\bin;C:\Program Files\ActiveState Komodo Edit 6\;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\e\cmd;C:\Program Files\MySQL\MySQL Server 5.1\bin;C:\WINDOWS\system32\WindowsPowerShell\v1.0;c:\tools;C:\gnuwin32\bin;C:\tools\wkhtmltopdf;C:\Python31;C:\Program Files\TortoiseHg\;C:\Program Files\TortoiseGit\bin; c:\program files\videolan\vlc;C:\Program Files\SMPlayer\mplayer;C:\Program Files\Git\cmd;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Calibre2\;c:\ruby\jruby-1.5.5\bin;C:\Program Files\Common Files\Shoes\0.r1514\..) Using rake (0.8.7) Using abstract (1.0.0) Using activesupport (3.0.3) Using builder (2.1.2) Using i18n (0.4.2) Using activemodel (3.0.3) Using erubis (2.6.6) Using rack (1.2.1) Using rack-mount (0.6.13) Using rack-test (0.5.6) Using tzinfo (0.3.23) Using actionpack (3.0.3) Using mime-types (1.16) Using polyglot (0.3.1) Using treetop (1.4.9) Using mail (2.2.10) Using actionmailer (3.0.3) Using arel (2.0.4) Using activerecord (3.0.3) Using activeresource (3.0.3) Using bcrypt-ruby (2.1.4) Using bundler (1.0.7) Using cancan (1.5.0) Using haml (3.0.24) Using compass (0.10.6) Using warden (1.0.3) Using devise (1.1.5) Installing hpricot (0.8.3) Temporarily enhancing PATH to include DevKit... with native extensions C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:483:in `build_extensions': ERROR: Failed to build gem native extension. (Gem::Installer::ExtensionBuildError) C:/ruby/Ruby187/bin/ruby.exe extconf.rb checking for stdio.h... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=C:/ruby/Ruby187/bin/ruby Gem files will remain installed in C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/hpricot-0.8.3 for inspection. Results logged to C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/hpricot-0.8.3/ext/fast_xs/gem_make.out from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:446:in `each' from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:446:in `build_extensions' from C:/ruby/Ruby187/lib/ruby/site_ruby/1.8/rubygems/installer.rb:198:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/source.rb:95:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:55:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/spec_set.rb:12:in `each' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:44:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/installer.rb:8:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/cli.rb:225:in `install' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in `send' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/task.rb:22:in `run' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/invocation.rb:118:in `invoke_task' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor.rb:246:in `dispatch' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/lib/bundler/vendor/thor/base.rb:389:in `start' from C:/ruby/Ruby187/lib/ruby/gems/1.8/gems/bundler-1.0.7/bin/bundle:13 from C:/ruby/Ruby187/bin/bundle:19:in `load' from C:/ruby/Ruby187/bin/bundle:19

  Read the article

• Has "Killer Game Programming in Java" by Andrew Davison been rendered useless? What new tutorial should I follow? [duplicate]

  - by BDillan

  This question already has an answer here: Killer Game Programming [Java 3D] outdated? 5 answers Its pathetic how it was created in 2005 not so long ago when the Java 3D 1.31 API was released. Now after downloading the source code off the books website and implementing it onto my work-space it cant run. (The 3D Shooter Ch. 23) I downloaded Java 3D 1.5 API, installed it- went back to my source code and javax.media ect.., and EVERY imported class within the game simply couldn't be resolved... they are all outdated.. Please do not say how its meant for a positive curvature in your game development skills. No ~ I got the book to understand how to code 3D textures/particle systems/games. Without seeing results how can I learn? If there is still hope for this book please tell me. Otherwise what other books match this one in Game Programming? This one was very well organized, documented and long. I am not looking for a 3D game prog. book on Java. Rather one that has the same reputation as this one but is a bit newer..

  Read the article

• Switching from Java/Java EE career path to C POS path?

  - by Muhammad

  I am a Java/Java EE Developer with about 3 years in this field. I like low-level programming so much... I favor back-end code over front-end. I've a knowledge in C and know little about C++. I got an offer to work with C in Point-of-Sale Payment terminals. I don't know much about how POS works (IDE/toolsets, etc). although I have a payment experience (ISO8583, etc...) I need you own opinion from Switching from the Java's High-level world to POS low-level world Although I love low-level world, but I am afraid from not being found what I seek.. I know programmers are not measured by the tools they use (including prog. langs.) but with their minds. I need your opinions of: Is programming POS terminals in C is an interesting thing, or I'll find myself doing usual code-writing job? (especially I am about to switch my whole career path). I find myself writing an elegant code in Java (like: Sobat http://code.google.com/p/sobat/) a code where I find myself in... So do I'll find the same thing in POS C? or It will all about Libraries that I'll call to finish my work?! Lastly, does this thing worse adventure with my current career (stability, conference, etc.. )? (as I currently don't think to move to a new job) Thanks.

  Read the article

• Cedarview drivers boot to a blank screen

  - by map7

  I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

  Read the article

• How do I fix a garbled screen on a Gateway LT3103u?

  - by paracaudex

  I've been having garbled screen problems on a Gateway LT3103u on Ubuntu for a while. I just did a fresh install of Ubuntu 11.10 and continue to have issues. I installed xubuntu-desktop in case the issues had to do with the sophisticated GNOME graphics. The problem is less bad, but it's still there. After a few minutes of using XFCE, the screen gets garbled. I assume this has something to do with the graphics card, but I don't know how to go about troubleshooting something like this. Where should I start? Update: Here is the description of the VGA card from lspci -vvv: 01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Acer Incorporated [ALI] Device 028c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast TAbort- SERR- [disabled] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Kernel driver in use: radeon Kernel modules: radeon Update: Setting GRUB_CMDLINE_LINUX="nomodeset" in /etc/default/grub seems to have fixed it in both Ubuntu and xubuntu-desktop. I will test it for a day or so to see if the problems recur and then post more detail with some links to an explanation. Update 2: It is possible to use this fix for Nvidia card (GTX 260) when graphics is defective after 11.10 upgrade/install? First few restarts was graphic ok, then after few restarts begins suddenly be defective and it stay so. I must returned to 11.04 because this problem and I wait for 12.04. So I hope in this fix.

  Read the article

• Ubuntu 13.10 No Sound

  - by spiersie

  I was running 13.04 since last monday and just today i upgraded to 13.10, in both of these version i have not managed to get my sound working. I have gone into alsamixer and disabled auto mute and the volumes are up. However if somebody thinks they can help me fix this i will gladly follow any steps. Please lay specifically any terminal commands you need me to do to either show specs or solve the problem as i am not fluent with the linux commands, this desktop being my first system to run linux, starting last monday. blake@Blake-Ubuntu-PC:~$ lspci -v | grep -A7 -i "audio" 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: ASUSTeK Computer Inc. Device 8526 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at fef44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Device 8445 Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at fef40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)

  Read the article

• ERROR: Failed to build gem native extension (mysql2 on rails 3.2.3)

  - by Ryan Arneson

  I'm trying to install the mysql2 gem with Rails 3.2.3 and it's failing: ? bundle install Fetching gem metadata from https://rubygems.org/......... Using rake (0.9.2.2) Using i18n (0.6.0) Using multi_json (1.2.0) Using activesupport (3.2.3) Using builder (3.0.0) Using activemodel (3.2.3) Using erubis (2.7.0) Using journey (1.0.3) Using rack (1.4.1) Using rack-cache (1.2) Using rack-test (0.6.1) Using hike (1.2.1) Using tilt (1.3.3) Using sprockets (2.1.2) Using actionpack (3.2.3) Using mime-types (1.18) Using polyglot (0.3.3) Using treetop (1.4.10) Using mail (2.4.4) Using actionmailer (3.2.3) Using arel (3.0.2) Using tzinfo (0.3.32) Using activerecord (3.2.3) Using activeresource (3.2.3) Using bundler (1.1.3) Using coffee-script-source (1.2.0) Using execjs (1.3.0) Using coffee-script (2.2.0) Using rack-ssl (1.3.2) Using json (1.6.6) Using rdoc (3.12) Using thor (0.14.6) Using railties (3.2.3) Using coffee-rails (3.2.2) Using jquery-rails (2.0.2) Installing mysql2 (0.3.11) with native extensions Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension. /Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby extconf.rb checking for rb_thread_blocking_region()... yes checking for rb_wait_for_single_fd()... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/Users/rarneson/.rvm/rubies/ruby-1.9.3-p125/bin/ruby --with-mysql-config --without-mysql-config --with-mysql-dir --without-mysql-dir --with-mysql-include --without-mysql-include=${mysql-dir}/include --with-mysql-lib --without-mysql-lib=${mysql-dir}/lib --with-mysqlclientlib --without-mysqlclientlib --with-mlib --without-mlib --with-mysqlclientlib --without-mysqlclientlib --with-zlib --without-zlib --with-mysqlclientlib --without-mysqlclientlib --with-socketlib --without-socketlib --with-mysqlclientlib --without-mysqlclientlib --with-nsllib --without-nsllib --with-mysqlclientlib --without-mysqlclientlib --with-mygcclib --without-mygcclib --with-mysqlclientlib --without-mysqlclientlib Gem files will remain installed in /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11 for inspection. Results logged to /Users/rarneson/.rvm/gems/ruby-1.9.3-p125/gems/mysql2-0.3.11/ext/mysql2/gem_make.out An error occured while installing mysql2 (0.3.11), and Bundler cannot continue. Make sure that `gem install mysql2 -v '0.3.11'` succeeds before bundling. I'm running bundle install and this is in my Gemfile: gem 'mysql2', '~> 0.3.11' I've currently got MySQL running through MAMP. I'm not sure if this is a bad idea and I should run a vanilla MySQl but it seems my current problem is just getting the gem installed. I've seen quite a few of these problems here on stackoverflow but all seem a bit different or have really complicated solutions. Is there something I'm missing? Something simple? Something stupid? I can provide additional info from the out file if necessary. I've read that some people use SQLite for dev and test then MySQL in prod but that sounds like a pretty horrible idea.

  Read the article

• help download and install and save and use my wireless stick modem and software

  - by ADAM

  i installed Linux Ubuntu after my win os went totally dead by fatal blue screen. cannot reboot or install form CD ROM or get safe mode i installed Linux Ubuntu i still unable to install my wireless stick usb modem to connect and surf the Internet wireless form my provider. i use wireless network from neighborhood And i find it difficult to download and install and save porg and application from the INTERNET like skype and real player and others. it is different form windows and not that easy to use. i click to download for example and find real player but when click on it it opens as text file only and i cannot use it as it should be used for video and download and record from you tube. how to do it. and is there with Linux Ubuntu similar prog to download and record and save from you tube as in windows? Is there any trick to restart or reboot windows OS from the dead. can i use linux to reboot windows or to import my files from the blue screen stopped windows7? Any help is highly appreciated. thanks please email me to : [email protected]

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Sound card not detected in 13.04

  - by Ganessh Kumar R P

  I have a problem with my sound card. I don't have volume up or down option anywhere. In the setting -> Sound I don't have any card detected. But when I run the command sudo aplay -l, I get the following output **** List of PLAYBACK Hardware Devices **** Failed to create secure directory (/home/ganessh/.config/pulse): Permission denied card 0: MID [HDA Intel MID], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 And the command lspci -v | grep -A7 -i "audio" outputs 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at f0f20000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) -- 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 02a2 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at d3efc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 07:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 So, I assume that the drivers are properly installed but still I don't get any option in the settings or volume control. The same card used to work well back in 2010 versions(04 and 10) Any help is appreciated. Thanks

  Read the article

• Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

  - by Coen

  After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

  Read the article

• LA SPÉCIALISATION POUR SE DIFFÉRENCIER ET ÊTRE VALORISÉ

  - by michaela.seika(at)oracle.com

  Software. Hardware. Complete. inside the Click Here The order you must follow to make the colored link appear in browsers. If not the default window link will appear 1. Select the word you want to use for the link 2. Select the desired color, Red, Black, etc 3. Select bold if necessary ___________________________________________________________________________________________________________________ Templates use two sizes of fonts and the sans-serif font tag for the email. All Fonts should be (Arial, Helvetica, sans-serif) tags Normal size reading body fonts should be set to the size of 2. Small font sizes should be set to 1 !!!!!!!DO NOT USE ANY OTHER SIZE FONT FOR THE EMAILS!!!!!!!! ___________________________________________________________________________________________________________________ --     LA SPÉCIALISATION  POUR SE DIFFÉRENCIER ET ÊTRE VALORISÉ       Le marché nous demande de plus en plus de solutions et d’engagements. Pour bâtir ces solutions nous nous appuyons sur vous, Partenaires Oracle. En matière d’engagements, Oracle se doit de communiquer auprès du marché quant à la spécialisation de ses partenaires, sur leurs compétences en fonction des projets que les clients nous demandent d’adresser. Plus de 50 spécialisations sont à ce jour disponibles pour les partenaires Gold, Platinum et Diamond : • Sur les produits Technologiques tels que la Base de Données, les options de la Base, la SOA, la Business Intelligence, … • Sur les produits Applicatifs, tels que l’ERP, le CRM, … • Sur les produits Hardware, les Systèmes d’exploitation. Afin de vous aider à vous spécialiser et donc à vous certifier, nos 2 distributeurs à valeur ajoutée, Altimate et Arrow ECS, vous assistent dans cette démarche. ALTIMATE vous propose de participer Lunch & Spécialisation tour Profitez de ces dispositifs qui sont mis en place pour vous afin de vous spécialiser et profiter de tous les bénéfices auxquels vous donne accès la spécialisation. ARROW ECS vous propose de participer : L'Ecole de la spécialisation Oracle by Arrow Profitez de ces dispositifs qui sont mis en place pour vous afin de vous spécialiser et profiter de tous les bénéfices auxquels vous donne accès la spécialisation. Oracle Solutions Tour Découvrez la solution Oracle lors de ce tour de France. Au programme :  roadmaps, ateliers produits et solutions, certifications     BÉNÉFICES en savoir + • l’engagement d’Oracle aux côtés des partenaires pour adresser les grands dossiers • la visibilité auprès des clients pour être identifié comme Expert sur une offre, reconnu et validé par Oracle • le support (accès support gratuit), Oracle University (vouchers pour certifier gratuitement vos équipes de Consultants Implementation) • les budgets Marketing (lead generation, création de campagnes Marketing, être sponsor d’événements clients)   Différenciez-vous en vous spécialisant sur votre domaine d’expertise et accélérez votre succès ! Oracle et ses Distributeurs à Valeur Ajoutée     Eric Fontaine Directeur Alliances & Channel Technologie Europe du Sud vous présente en vidéo la spécialisation et ses avantages.                                         CONTACTS : ORACLE Jean-Jacques PanissiéOracle Partner Development A&C Technology +33 157 60 28 52 ALTIMATE Sophie Daval +33 1 34 58 47 68 ARROW [email protected] +33 1 49 97 59 63          

  Read the article

• how to find if the machine is 32bit or 64bit

  - by prabodh

  Is there anyway from a C prog to find whether the OS is currently running in 32bit or 64bit mode. I am using a simple program as below int main(void){ switch(sizeof(void*)){ case 4: printf("32\n"); break; case 8: printf("64\n"); break; } } Is this a correct approach ? Would this code work in all the scenarios like, If the hardware is 64bit and the OS is 32bit what would it return ? I don't have machine to test this in diff configurations. Thanks for the advice.

  Read the article

• C# Improvement on a Fire-and-Forget

  - by adam

  Greetings I have a program that creates multiples instances of a class, runs the same long-running Update method on all instances and waits for completion. I'm following Kev's approach from this question of adding the Update to ThreadPool.QueueUserWorkItem. In the main prog., I'm sleeping for a few minutes and checking a Boolean in the last child to see if done while(!child[child.Length-1].isFinished){ Thread.Sleep(...); } This solution is working the way I want, but is there a better way to do this? Both for the independent instances and checking if all work is done. Thanks

  Read the article

• How does COM registration work in Windows

  - by Air Benji

  I'm an application packager trying to make sense of how the COM registry keys (SelfReg) interrelate to the given .dll in Windows. ProgID's, AppID's, TypeLibs, Extensions & Verbs are all tied around the CLSID right? Do CLSID's always use Prog/App IDs or could you just have a file extension class? Which bits are optional? Some of it seems to be 'like a router' where there's the two interfaces (internal - .dll) and external (the extension etc). How does this all fit? (The SDK documentation doesn't make sense to me) I ask as this is all pivotal to application 'healing' with Windows Installer (which packagers are all 'big' on, but there's no nitty-gritty breakdowns since its a coder-thing really) ---Edit: Am I safe in assuming that for what COM is registered, it must all link back to the CLSID and cannot be a 'dead-end'? Verbs need extensions which need progid's... What about the AppId's, TypeLibs and Interfaces? How do they interrelate?

  Read the article

• Can you hep me with my Perl homework?

  - by riya

  Could someone write simple Perl programs for the following scenarios: convert a list from {1,2,3,4,5,7,9,10,11,12,34} to {1-5,7,9-12,34} to sort a list of negative numbers to insert values to hash array there is a file with content: C1 c2 c3 c4 r1 r2 r3 r4 put it into an hash array where keys = {c1,c2,c3,c4} and values = {r1,r2,r3,r4} There are testcases running each testcase runs as a process and has a process ID. The logs are logged in a logfile process ID appended to each line. Prog to find out if the test case has passed or failed. The program shoud be running till the processes are running and display output.

  Read the article

• Why can't we have a single programming Language ? [closed]

  - by Kiran

  I am no expert in Programming Languages. But whenever I change the project, I am faced with Herculean challenge of learning the new programming language which takes weeks to master if not months.. With the previous experience of programming in different languages, I believe it takes few months of continuous programming to understand the amazing features the prog.language has to offer and to exploit. It makes me wonder, why cannot we have a single programming language which boasts all the amazing features from the existing programming language and make it mandatory for all the programmers to learn it.

  Read the article

• Setting HTML Text Element value

  - by Gpx

  Hi, in my C# WPF prog i´am trying to set a value of a HTML Text Element which is defined like: <input name="tbBName" type="text" id="tbBName" tabindex="1" /> What i found about it and tried is: mshtml.HTMLDocument doc = (mshtml.HTMLDocument)webBrowser1.Document; mshtml.HTMLInputTextElement tbName = (mshtml.HTMLInputTextElement)doc.getElementsByName("tbBName"); tbName.value = "Test"; But i got the exception: Unable to cast COM object of type 'System.__ComObject' to interface type 'mshtml.HTMLInputTextElement'. This operation failed because the QueryInterface call on the COM component for the interface with IID '{3050F520-98B5-11CF-BB82-00AA00BDCE0B}' failed due to the following error: No such interface supported (Exception from HRESULT: 0x80004002 (E_NOINTERFACE)). I know what it says but i dont know which object i can use to access the Texbox. Thanks for any answers.

  Read the article

• How do I get toolbars on UISplitView detail & root views?

  - by Gerry

  I'm porting my iPhone app to iPad. I have a bunch of detail views that derive from UIViewController and implement UITableViewDelegate. (Basically TableViews but not derived as such). The old app used TabBar, but now I'd like to use SplitView with toolbars on the Detail and Master views. How do I enable a toolbar on my UIViewController inside a UISplitViewController? I'm not using Interface Builder here, just code. @interface HeadlineViewController : UIViewController { UITableView *tableView; NSMutableArray *bullIds; UIActivityIndicatorView *prog; } Thanks,

  Read the article

• Connect to a running instance of Visual Studio 2003 using COM, build and read output

  - by codeape

  For Visual Studio 6.0, I can connect to a running instance like: o = GetActiveObject("MSDev.Application") What prog ID do I use for Visual Studio 2003? How do I execute a 'Build Solution' once I have the COM object that references the VS2003 instance? How do I get the string contents of the build output window after executing the build solution command? Yes, I am aware that I can build a solution from the command line. But in this case, I need to connect to a running instance of Visual Studio. EDIT: found and submitted an answer, see below.

  Read the article

• Using only alphanumeric characters(a-z) inside toCharArray

  - by Aaron

  Below you will find me using toCharArray in order to send a string to array. I then MOVE the value of the letter using a for statement... for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } However, when I use shiftCode to move the value such as... a shifted by -1; I get a symbol @. Is there a way to send the string to shiftCode or tell shiftCode to ONLY use letters? I need it to see my text, like "aaron", and when I use the for statement iterate through a-z only and ignore all symbols and numbers. I THINK it is as simple as... letter=codeWord.toCharArray(a,z); But trying different forms of that and googling it didn't give me any results. Perhaps it has to do with regex or something? Below you will find a complete copy of my program; it works exactly how I want it to do; but it iterates through letters and symbols. I also tried finding instructions online for toCharArray but if there exists any arguments I can't locate them. My program... import java.io.BufferedReader; import java.io.IOException; import java.io.InputStreamReader; /* * Aaron L. Jones * CS219 * AaronJonesProg3 * * This program is designed to - * Work as a Ceasar Cipher */ /** * * Aaron Jones */ public class AaronJonesProg3 { static String codeWord; static int shiftCode; static int i; static char[] letter; /** * @param args the command line arguments */ public static void main(String[] args) throws IOException { // Instantiating that Buffer Class // We are going to use this to read data from the user; in buffer // For performance related reasons BufferedReader reader; // Building the reader variable here // Just a basic input buffer (Holds things for us) reader = new BufferedReader(new InputStreamReader(System.in)); // Java speaks to us here / We get it to query our user System.out.print("Please enter text to encrypt: "); // Try to get their input here try { // Get their codeword using the reader codeWord = reader.readLine(); // Make that input upper case codeWord = codeWord.toUpperCase(); // Cut the white space out codeWord = codeWord.replaceAll("\\s",""); // Make it all a character array letter = codeWord.toCharArray(); } // If they messed up the input we let them know here and end the prog. catch(Throwable t) { System.out.println(t.toString()); System.out.println("You broke it. But you impressed me because" + "I don't know how you did it!"); } // Java Speaks / Lets get their desired shift value System.out.print("Please enter the shift value: "); // Try for their input try { // We get their number here shiftCode = Integer.parseInt(reader.readLine()); } // Again; if the user broke it. We let them know. catch(java.lang.NumberFormatException ioe) { System.out.println(ioe.toString()); System.out.println("How did you break this? Use a number next time!"); } for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } System.out.println(); /**************************************************************** **************************************************************** ***************************************************************/ // Java speaks to us here / We get it to query our user System.out.print("Please enter text to decrypt: "); // Try to get their input here try { // Get their codeword using the reader codeWord = reader.readLine(); // Make that input upper case codeWord = codeWord.toUpperCase(); // Cut the white space out codeWord = codeWord.replaceAll("\\s",""); // Make it all a character array letter = codeWord.toCharArray(); } // If they messed up the input we let them know here and end the prog. catch(Throwable t) { System.out.println(t.toString()); System.out.println("You broke it. But you impressed me because" + "I don't know how you did it!"); } // Java Speaks / Lets get their desired shift value System.out.print("Please enter the shift value: "); // Try for their input try { // We get their number here shiftCode = Integer.parseInt(reader.readLine()); } // Again; if the user broke it. We let them know. catch(java.lang.NumberFormatException ioe) { System.out.println(ioe.toString()); System.out.println("How did you break this? Use a number next time!"); } for(i = 0; i < letter.length; i++){ letter[i] += (shiftCode); System.out.print(letter[i]); } System.out.println(); } }

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11  | Next Page >