Search Results

Search found 61305 results on 2453 pages for 'project page'.

Page 8/2453 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• How can you force the start and end date of a task in Microsoft Project to be on the same day?

  - by Hauke P.

  I have a task called "Interview person A about topic X". The task's duration is set to 2 hours. The start date of the task should automatically be calculated taking dependencies and resource availabilities into account. My question boils down to: How can I force this task to start and end on the same date? Background: In my case, Microsoft Project sets the start date to a Friday at 5pm. As my working hours are set to 8am to 12am and 1pm to 6pm (Mon-Fri), Microsoft Project "splits up" the task at 6pm on Friday and plans to continue it at 8am on the following Monday. However, it does not make any sense to stop the interview on a Friday and restart it on Monday. Therefore the automatic suggestion is not helpful in this case. That's why I'm looking for a way way to force the task to start and end on the very same day. (In my example, I'd like Microsoft Project to delay the start date of the task until Monday 8am as this is the first time slot in which the task "fits in completely".) By the way: I have lots of such cases... for that reason it would be really great if there was a solution that doesn't just deal with this single special case.)

  Read the article

• How to force the start and end date of a task in Microsoft Project to be on the same day?

  - by Hauke P.

  I have a task called "Interview person A about topic X". The task's duration is set to 2 hours. The start date of the task should automatically be calculated taking dependencies and resource availabilities into account. My question boils down to: How can I force this task to start and end on the same date? Background: In my case, Microsoft Project sets the start date to a Friday at 5pm. As my working hours are set to 8am to 12am and 1pm to 6pm (Mon-Fri), Microsoft Project "splits up" the task at 6pm on Friday and plans to continue it at 8am on the following Monday. However, it does not make any sense to stop the interview on a Friday and restart it on Monday. Therefore the automatic suggestion is not helpful in this case. That's why I'm looking for a way way to force the task to start and end on the very same day. (In my example, I'd like Microsoft Project to delay the start date of the task until Monday 8am as this is the first time slot in which the task "fits in completely".) By the way: I have lots of such cases... for that reason it would be really great if there was a solution that doesn't just deal with this single special case.

  Read the article

• New project created with Flex Mojo's archetype throws Cannot Find Parent Project-Maven Exception

  - by ignorant

  This is probably a silly question but I just cant seem to figure out. I'm completely new to flex and maven. Maven 2.2.1: Maven 2.2.1 unzipped,M2_HOME set and repository altered to point to different drive location in settings.xml Flex 4.0: Installed Created a multi-modular webapp project using flexmojo: mvn archetype:generate -DarchetypeRepository=http://repository.sonatype.org/content/groups/flexgroup -DarchetypeGroupId=org.sonatype.flexmojos -DarchetypeArtifactId=flexmojos-archetypes-modular-webapp -DarchetypeVersion=RELEASE with following options groupId=com.test artifactId=test version=1.0-snapshot package=com.tests * Creates * test |-- pom.xml |--swc -pom.xml |--swf -pom.xml `--war -pom.xml Parent pom has swc, swf, war as modules. Dependency is war-swf-swc. With parent artifactId of swf, swc, war set to swf, swc, test respectively. On executing mvn on test folder(for that matter clean or anything) I get this following error. G:\Projects\testmvn -e + Error stacktraces are turned on. [INFO] Scanning for projects... Downloading: http://repo1.maven.org/maven2/com/test/swc/1.0-snapshot/swc-1.0-snapshot.pom [INFO] Unable to find resource 'com.test:swc:pom:1.0-snapshot' in repository central (http://repo1.maven.org/maven2) [INFO] ------------------------------------------------------------------------ [ERROR] FATAL ERROR [INFO] ------------------------------------------------------------------------ [INFO] Failed to resolve artifact. GroupId: com.test ArtifactId: swc Version: 1.0-snapshot Reason: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) [INFO] ------------------------------------------------------------------------ [INFO] Trace org.apache.maven.reactor.MavenExecutionException: Cannot find parent: com.test:swc for project: com.test:swc-swc:swc:1.0-snapshot for project com.test:swc-swc:swc:1.0-snapshot at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:404) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:272) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:138) at org.apache.maven.cli.MavenCli.main(MavenCli.java:362) at org.apache.maven.cli.compat.CompatibleMain.main(CompatibleMain.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.codehaus.classworlds.Launcher.launchEnhanced(Launcher.java:315) at org.codehaus.classworlds.Launcher.launch(Launcher.java:255) at org.codehaus.classworlds.Launcher.mainWithExitCode(Launcher.java:430) at org.codehaus.classworlds.Launcher.main(Launcher.java:375) Caused by: org.apache.maven.project.ProjectBuildingException: Cannot find parent: com.test:swc for project: com.test:swc-swc:swc:1.0-snapshot for project com.test:swc-swc:swc:1.0-snapshot at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:1396) at org.apache.maven.project.DefaultMavenProjectBuilder.buildInternal(DefaultMavenProjectBuilder.java:823) at org.apache.maven.project.DefaultMavenProjectBuilder.buildFromSourceFileInternal(DefaultMavenProjectBuilder.java:508) at org.apache.maven.project.DefaultMavenProjectBuilder.build(DefaultMavenProjectBuilder.java:200) at org.apache.maven.DefaultMaven.getProject(DefaultMaven.java:604) at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:487) at org.apache.maven.DefaultMaven.collectProjects(DefaultMaven.java:560) at org.apache.maven.DefaultMaven.getProjects(DefaultMaven.java:391) ... 12 more Caused by: org.apache.maven.project.ProjectBuildingException: POM 'com.test:swc' not found in repository: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) for project com.test:swc at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:605) at org.apache.maven.project.DefaultMavenProjectBuilder.assembleLineage(DefaultMavenProjectBuilder.java:1392) ... 19 more Caused by: org.apache.maven.artifact.resolver.ArtifactNotFoundException: Unable to download the artifact from any repository com.test:swc:pom:1.0-snapshot from the specified remote repositories: central (http://repo1.maven.org/maven2) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:228) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:90) at org.apache.maven.project.DefaultMavenProjectBuilder.findModelFromRepository(DefaultMavenProjectBuilder.java:558) ... 20 more Caused by: org.apache.maven.wagon.ResourceDoesNotExistException: Unable to download the artifact from any repository at org.apache.maven.artifact.manager.DefaultWagonManager.getArtifact(DefaultWagonManager.java:404) at org.apache.maven.artifact.resolver.DefaultArtifactResolver.resolve(DefaultArtifactResolver.java:216) ... 22 more [INFO] ------------------------------------------------------------------------ [INFO] Total time: 1 second [INFO] Finished at: Tue Jun 15 19:22:15 GMT+02:00 2010 [INFO] Final Memory: 1M/2M [INFO] ------------------------------------------------------------------------ Looks like its trying to download the project from maven's central repository instead of building it. What am I missing?

  Read the article

• Project Euler 18: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 18.  As always, any feedback is welcome. # Euler 18 # http://projecteuler.net/index.php?section=problems&id=18 # By starting at the top of the triangle below and moving # to adjacent numbers on the row below, the maximum total # from top to bottom is 23. # # 3 # 7 4 # 2 4 6 # 8 5 9 3 # # That is, 3 + 7 + 4 + 9 = 23. # Find the maximum total from top to bottom of the triangle below: # 75 # 95 64 # 17 47 82 # 18 35 87 10 # 20 04 82 47 65 # 19 01 23 75 03 34 # 88 02 77 73 07 63 67 # 99 65 04 28 06 16 70 92 # 41 41 26 56 83 40 80 70 33 # 41 48 72 33 47 32 37 16 94 29 # 53 71 44 65 25 43 91 52 97 51 14 # 70 11 33 28 77 73 17 78 39 68 17 57 # 91 71 52 38 17 14 91 43 58 50 27 29 48 # 63 66 04 68 89 53 67 30 73 16 69 87 40 31 # 04 62 98 27 23 09 70 98 73 93 38 53 60 04 23 # NOTE: As there are only 16384 routes, it is possible to solve # this problem by trying every route. However, Problem 67, is the # same challenge with a triangle containing one-hundred rows; it # cannot be solved by brute force, and requires a clever method! ;o) import time start = time.time() triangle = [ [75], [95, 64], [17, 47, 82], [18, 35, 87, 10], [20, 04, 82, 47, 65], [19, 01, 23, 75, 03, 34], [88, 02, 77, 73, 07, 63, 67], [99, 65, 04, 28, 06, 16, 70, 92], [41, 41, 26, 56, 83, 40, 80, 70, 33], [41, 48, 72, 33, 47, 32, 37, 16, 94, 29], [53, 71, 44, 65, 25, 43, 91, 52, 97, 51, 14], [70, 11, 33, 28, 77, 73, 17, 78, 39, 68, 17, 57], [91, 71, 52, 38, 17, 14, 91, 43, 58, 50, 27, 29, 48], [63, 66, 04, 68, 89, 53, 67, 30, 73, 16, 69, 87, 40, 31], [04, 62, 98, 27, 23, 9, 70, 98, 73, 93, 38, 53, 60, 04, 23]] # Loop through each row of the triangle starting at the base. for a in range(len(triangle) - 1, -1, -1): for b in range(0, a): # Get the maximum value for adjacent cells in current row. # Update the cell which would be one step prior in the path # with the new total. For example, compare the first two # elements in row 15. Add the max of 04 and 62 to the first # position of row 14.This provides the max total from row 14 # to 15 starting at the first position. Continue to work up # the triangle until the maximum total emerges at the # triangle's apex. triangle [a-1][b] += max(triangle [a][b], triangle [a][b+1]) print triangle [0][0] print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• Project Euler 11: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 11.  As always, any feedback is welcome. # Euler 11 # http://projecteuler.net/index.php?section=problems&id=11 # What is the greatest product # of four adjacent numbers in any direction (up, down, left, # right, or diagonally) in the 20 x 20 grid? import time start = time.time() grid = [\ [8,02,22,97,38,15,00,40,00,75,04,05,07,78,52,12,50,77,91,8],\ [49,49,99,40,17,81,18,57,60,87,17,40,98,43,69,48,04,56,62,00],\ [81,49,31,73,55,79,14,29,93,71,40,67,53,88,30,03,49,13,36,65],\ [52,70,95,23,04,60,11,42,69,24,68,56,01,32,56,71,37,02,36,91],\ [22,31,16,71,51,67,63,89,41,92,36,54,22,40,40,28,66,33,13,80],\ [24,47,32,60,99,03,45,02,44,75,33,53,78,36,84,20,35,17,12,50],\ [32,98,81,28,64,23,67,10,26,38,40,67,59,54,70,66,18,38,64,70],\ [67,26,20,68,02,62,12,20,95,63,94,39,63,8,40,91,66,49,94,21],\ [24,55,58,05,66,73,99,26,97,17,78,78,96,83,14,88,34,89,63,72],\ [21,36,23,9,75,00,76,44,20,45,35,14,00,61,33,97,34,31,33,95],\ [78,17,53,28,22,75,31,67,15,94,03,80,04,62,16,14,9,53,56,92],\ [16,39,05,42,96,35,31,47,55,58,88,24,00,17,54,24,36,29,85,57],\ [86,56,00,48,35,71,89,07,05,44,44,37,44,60,21,58,51,54,17,58],\ [19,80,81,68,05,94,47,69,28,73,92,13,86,52,17,77,04,89,55,40],\ [04,52,8,83,97,35,99,16,07,97,57,32,16,26,26,79,33,27,98,66],\ [88,36,68,87,57,62,20,72,03,46,33,67,46,55,12,32,63,93,53,69],\ [04,42,16,73,38,25,39,11,24,94,72,18,8,46,29,32,40,62,76,36],\ [20,69,36,41,72,30,23,88,34,62,99,69,82,67,59,85,74,04,36,16],\ [20,73,35,29,78,31,90,01,74,31,49,71,48,86,81,16,23,57,05,54],\ [01,70,54,71,83,51,54,69,16,92,33,48,61,43,52,01,89,19,67,48]] # left and right max, product = 0, 0 for x in range(0,17): for y in xrange(0,20): product = grid[y][x] * grid[y][x+1] * \ grid[y][x+2] * grid[y][x+3] if product > max : max = product # up and down for x in range(0,20): for y in xrange(0,17): product = grid[y][x] * grid[y+1][x] * \ grid[y+2][x] * grid[y+3][x] if product > max : max = product # diagonal right for x in range(0,17): for y in xrange(0,17): product = grid[y][x] * grid[y+1][x+1] * \ grid[y+2][x+2] * grid[y+3][x+3] if product > max: max = product # diagonal left for x in range(0,17): for y in xrange(0,17): product = grid[y][x+3] * grid[y+1][x+2] * \ grid[y+2][x+1] * grid[y+3][x] if product > max : max = product print max print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• Parallel downloading of JavaScript files on page load

  - by user359650

  Below is a quote from one of the Yahoo performance pages: While a script is downloading, however, the browser won't start any other downloads, even on different hostnames. When I look at page load of our website, I can see that many scripts are being downloaded at the same time: Am I mistaken, or should the quote should instead read like this? While scripts are downloading (there can be several scripts downloading at the same time), the browser won't start any other downloads, even on different hostnames.

  Read the article

• Indexing and Page Ranking Issues

  - by user631249

  Hi all I am on the first page of google for keywords concerned with MOVING, however i cant seem to break the carpet cleaning rankings. I have made changes and additions which havent been indexed yet. Should i wait for the run or please please can someone give me pointers on the carpet cleaning indexing. Also i have 53pages submitted and only 38 indexed, where could the problem be. Is there software to check indexing hiccups . Thanks.

  Read the article

• How to create a link to Nintex Start Workflow Page in the document set home page

  - by ybbest

  In this blog post, I’d like to show you how to create a link to start Nintex Workflow Page in the document set home page. 1. Firstly, you need to upload the latest version of jQuery to the style library of your team site. 2. Then, upload a text file to the style library for writing your own html and JavaScript 3. In the document set home page, insert a new content editor web part and link the text file you just upload. 4. Update the text file with the following content, you can download this file here. <script type="text/javascript" src="/Style%20Library/jquery-1.9.0.min.js"></script> <script type="text/javascript" src="/_layouts/sp.js"></script> <script type="text/javascript"> $(document).ready(function() { listItemId=getParameterByName("ID"); setTheWorkflowLink("YBBESTDocumentLibrary"); }); function buildWorkflowLink(webRelativeUrl,listId,itemId) { var workflowLink =webRelativeUrl+"_layouts/NintexWorkflow/StartWorkflow.aspx?list="+listId+"&ID="+itemId+"&WorkflowName=Start Approval"; return workflowLink; } function getParameterByName(name) { name = name.replace(/[\[]/, "\\\[").replace(/[\]]/, "\\\]"); var regexS = "[\\?&]" + name + "=([^&#]*)"; var regex = new RegExp(regexS); var results = regex.exec(window.location.search); if(results == null){ return ""; } else{ return decodeURIComponent(results[1].replace(/\+/g, " ")); } } function setTheWorkflowLink(listName) { var SPContext = new SP.ClientContext.get_current(); web = SPContext.get_web(); list = web.get_lists().getByTitle(listName); SPContext.load(web,"ServerRelativeUrl"); SPContext.load(list, 'Title', 'Id'); SPContext.executeQueryAsync(setTheWorkflowLink_Success, setTheWorkflowLink_Fail); } function setTheWorkflowLink_Success(sender, args) { var listId = list.get_id(); var listTitle = list.get_title(); var webRelativeUrl = web.get_serverRelativeUrl(); var startWorkflowLink=buildWorkflowLink(webRelativeUrl,listId,listItemId) $("a#submitLink").attr('href',startWorkflowLink); } function setTheWorkflowLink_Fail(sender, args) { alert("There is a problem setting up the submit exam approval link"); } </script> <a href="" target="_blank" id="submitLink"><span style="font-size:14pt">Start the approval process.</span></a> 5. Save your changes and go to the document set Item, you will see the link is on the home page now. Notes: 1. You can create a link to start the workflow using the following build dynamic string configuration: {Common:WebUrl}/_layouts/NintexWorkflow/StartWorkflow.aspx?list={Common:ListID}&ID={ItemProperty:ID}&WorkflowName=workflowname. With this link you will still need to click the start button, this is standard SharePoint behaviour and cannot be altered. References: http://connect.nintex.com/forums/27143/ShowThread.aspx How to use html and JavaScript in Content Editor web part in SharePoint2010

  Read the article

• Project structure: where to put business logic

  - by Mister Smith

  First of all, I'm not asking where does business logic belong. This has been asked before and most answers I've read agree in that it belongs in the model: Where to put business logic in MVC design? How much business logic should be allowed to exist in the controller layer? How accurate is "Business logic should be in a service, not in a model"? Why put the business logic in the model? What happens when I have multiple types of storage? However people disagree in the way this logic should be distributed across classes. There seem to exist three major currents of thought: Fat model with business logic inside entity classes. Anemic model and business logic in "Service" classes. It depends. I find all of them problematic. The first option is what most Fowlerites stick to. The problem with a fat model is that sometimes a business logic funtion is not only related to a class, and instead uses a bunch of other classes. If, for example, we are developing a web store, there should be a function that calcs an order's total. We could think of putting this function inside the Order class, but what actually happens is that the logic needs to use different classes, not only data contained in the Order class, but also in the User class, the Session class, and maybe the Tax class, Country class, or Giftcard, Payment, etc. Some of these classes could be composed inside the Order class, but some others not. Sorry if the example is not very good, but I hope you understand what I mean. Putting such a function inside the Order class would break the single responsibility principle, adding unnecesary dependences. The business logic would be scattered across entity classes, making it hard to find. The second option is the one I usually follow, but after many projects I'm still in doubt about how to name the class or classes holding the business logic. In my company we usually develop apps with offline capabilities. The user is able to perform entire transactions offline, so all validation and business rules should be implemented in the client, and then there's usually a background thread that syncs with the server. So we usually have the following classes/packages in every project: Data model (DTOs) Data Access Layer (Persistence) Web Services layer (Usually one class per WS, and one method per WS method). Now for the business logic, what is the standard approach? A single class holding all the logic? Multiple classes? (if so, what criteria is used to distribute the logic across them?). And how should we name them? FooManager? FooService? (I know the last one is common, but in our case it is bad naming because the WS layer usually has classes named FooWebService). The third option is probably the right one, but it is also devoid of any useful info. To sum up: I don't like the first approach, but I accept that I might have been unable to fully understand the Zen of it. So if you advocate for fat models as the only and universal solution you are welcome to post links explaining how to do it the right way. I'd like to know what is the standard design and naming conventions for the second approach in OO languages. Class names and package structure, in particular. It would also be helpful too if you could include links to Open Source projects showing how it is done. Thanks in advance.

  Read the article

• Project Euler 17: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 17.  As always, any feedback is welcome. # Euler 17 # http://projecteuler.net/index.php?section=problems&id=17 # If the numbers 1 to 5 are written out in words: # one, two, three, four, five, then there are # 3 + 3 + 5 + 4 + 4 = 19 letters used in total. # If all the numbers from 1 to 1000 (one thousand) # inclusive were written out in words, how many letters # would be used? # # NOTE: Do not count spaces or hyphens. For example, 342 # (three hundred and forty-two) contains 23 letters and # 115 (one hundred and fifteen) contains 20 letters. The # use of "and" when writing out numbers is in compliance # with British usage. import time start = time.time() def to_word(n): h = { 1 : "one", 2 : "two", 3 : "three", 4 : "four", 5 : "five", 6 : "six", 7 : "seven", 8 : "eight", 9 : "nine", 10 : "ten", 11 : "eleven", 12 : "twelve", 13 : "thirteen", 14 : "fourteen", 15 : "fifteen", 16 : "sixteen", 17 : "seventeen", 18 : "eighteen", 19 : "nineteen", 20 : "twenty", 30 : "thirty", 40 : "forty", 50 : "fifty", 60 : "sixty", 70 : "seventy", 80 : "eighty", 90 : "ninety", 100 : "hundred", 1000 : "thousand" } word = "" # Reverse the numbers so position (ones, tens, # hundreds,...) can be easily determined a = [int(x) for x in str(n)[::-1]] # Thousands position if (len(a) == 4 and a[3] != 0): # This can only be one thousand based # on the problem/method constraints word = h[a[3]] + " thousand " # Hundreds position if (len(a) >= 3 and a[2] != 0): word += h[a[2]] + " hundred" # Add "and" string if the tens or ones # position is occupied with a non-zero value. # Note: routine is broken up this way for [my] clarity. if (len(a) >= 2 and a[1] != 0): # catch 10 - 99 word += " and" elif len(a) >= 1 and a[0] != 0: # catch 1 - 9 word += " and" # Tens and ones position tens_position_value = 99 if (len(a) >= 2 and a[1] != 0): # Calculate the tens position value per the # first and second element in array # e.g. (8 * 10) + 1 = 81 tens_position_value = int(a[1]) * 10 + a[0] if tens_position_value <= 20: # If the tens position value is 20 or less # there's an entry in the hash. Use it and there's # no need to consider the ones position word += " " + h[tens_position_value] else: # Determine the tens position word by # dividing by 10 first. E.g. 8 * 10 = h[80] # We will pick up the ones position word later in # the next part of the routine word += " " + h[(a[1] * 10)] if (len(a) >= 1 and a[0] != 0 and tens_position_value > 20): # Deal with ones position where tens position is # greater than 20 or we have a single digit number word += " " + h[a[0]] # Trim the empty spaces off both ends of the string return word.replace(" ","") def to_word_length(n): return len(to_word(n)) print sum([to_word_length(i) for i in xrange(1,1001)]) print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• Project euler problem 3 in haskell

  - by shk

  I'm new in Haskell and try to solve 3 problem from http://projecteuler.net/. The prime factors of 13195 are 5, 7, 13 and 29. What is the largest prime factor of the number 600851475143 ? My solution: import Data.List getD :: Int -> Int getD x = -- find deviders let deriveList = filter (\y -> (x `mod` y) == 0) [1 .. x] filteredList = filter isSimpleNumber deriveList in maximum filteredList -- Check is nmber simple isSimpleNumber :: Int -> Bool isSimpleNumber x = let deriveList = map (\y -> (x `mod` y)) [1 .. x] filterLength = length ( filter (\z -> z == 0) deriveList) in case filterLength of 2 -> True _ -> False I try to run for example: getD 13195 > 29 But when i try: getD 600851475143 I get error Exception: Prelude.maximum: empty list Why? Thank you @Barry Brown, I think i must use: getD :: Integer -> Integer But i get error: Couldn't match expected type `Int' with actual type `Integer' Expected type: [Int] Actual type: [Integer] In the second argument of `filter', namely `deriveList' In the expression: filter isSimpleNumber deriveList Thank you.

  Read the article

• Adobe Acrobat Reader don't zoom out the page enough in "one page" mode

  - by mbaitoff

  I'm using Adobe Acrobat Reader version 9.4 under Debian Lenny. I'm experiencing a problem: when I push the "Show one page at a time" button, I expect the page to zoom such that pressing PgUp/PgDn would turn to the next/previous page. However, the zoom seems to be not enough - very thin bottom portion of the page doesn't fit inside the reader window, and pressing PgUp/PgDn gives the jitter of the same page, and I have to push twice to get to the next page. It is even worse in continuous page mode - a roll of pages begin to be non-synced with window boundaries, ending up with page break right in the middle of the view after several turns of the pages. This behaviour doesn't occur on windows version - I have a page properly zoomed in single/continuous modes, so that turning the pages is performed as page-at-once, as intended. How to make the Acrobat Reader fit the page to window properly? Thats how it looks before pressing PgDn (notice the bottom edge of the "paper" hidden beneath the bottom window edge): Thats how it looks after pressing PgDn (notice the "paper" bottom edge emerged from beneath the window edge, while the "paper" upper edge hides behind the upper window edge, showing that the document window size is not enough to contain the whole page):

  Read the article

• Resize content for "frame" on .aspx page which draws product content from suppliers' page

  - by zenbike

  I have a retail store site, no online sales, which displays the webpage of our supplier in a "frame" in order to have the most accurate and up to date information for our customers. (example) My issue is that the size of the page it is pulling in doesn't fit in the frame. It looks pretty poor, and part of the content is obscured. Is there a way to scale the content drawn in to the size of the frame? The same site also has an intermittent issue with the Flash banner loading. When it doesn't load, the layout of the header on the page is awful. Any ideas there will also be appreciated.

  Read the article

• Page for Page Redirect in Google App Engine

  - by clifgray

  I have recently changed domain name for a webapp I run on Google App Engine and I am wondering if there is a simple way to do a page for page redirect from my old website to the new domain. Everything code wise is staying exactly the same but I just want it to go to the new domain. I am using python and the webapp2 framework for the webapp. I know I could go through and for every single handler do: webapp2.redirect('the specific url', permanent=True) But I am hoping for a simpler solution.

  Read the article

• Alternative to | more to display error results page by page

  - by Lane

  The command psql -d template_postgis2 -f /usr/share/postgresql/9.1/contrib/postgis-2.1/postgis.sql returns a list of errors that is too long to be displayed by scrolling up to the beginning of the error. I tried the same command with "| more" and "| less" added up at the end of the command but it does not display the message page by page as it should. I also tried to put the output in a file with "> file.txt" but I do not get in this new file what is displayed on the screen!! I don't understand why. I guess i can't do this with a psql command?? Is there any other way to get all the error message? Thanks for your help!

  Read the article

• Length of Page Title, URL, Meta Description and total number of links on a page

  - by MJWadmin

  We've been examining a number of different SEO tools recently. Several of these tell us that some of our page title's, urls and meta descriptions are too long. We've also been told that some of our pages have too many links on them. I guess our first question is - is any of that feedback true! Can URL's etc actually be too long and if so how much does this affect ranking? Secondly can you have too many links on a page and if so, how many is too many? Thanks in advance...

  Read the article

• What to do when opensource project starts to tear apart? (or a manager tries to write code and than shouts at the team)

  - by Kabumbus

  Imagine there is an open source cross-platform project on Google code. It has lots of revisions (1000). It concentrates in itself lots technological stuff - rare stuff - it mixes top tech. It contains server, and more than one client. The project was created by a well-connected team of developers (friends) and a manager that was sponsoring project at its start up during its first few months (project now is more than a year old-sponsoring oss project is a big good deal- also gave the idea of project to developers). The project was growing in complexity and effort reqiered to continue development. Once upon a time a manager - team leader started trying to write code (he was a programmer in some other projects - not the best, but he felt like he was one). He started because one of the developers suggested an idea at the team meeting and he felt he just needed to do it on his own. He failed, and he told the dev team about it. The dev team did what he failed to do in a few days. After that, the manager feels that team codes with out him perfectly and gets the job done in short time. He felt sorry and lost and he started to crash like an old bad PC. Firstly, he started to scream (in forms of messages not in voice) he tried to tell developers that what they were doing was a bad, not-needed thing - developers kindly told him that his "beginnings" were not compilable while dev team product worked as needed. He told the developers that all work they do should be firstly discussed with him. Here is the part where we need to mention that all team members are "project owners" and logically have equal rights. The team leader suggested to the developers these options: change their dev process to go through him, or be moved from project owners to contributers. So what are our options as developers? What arguments we can provide to the team leader/manager for him to calm down? Is it possible to save the project or is it better to fork out now? An important issue is that lately we had no active ticket system, and I personally think that this was the reason the mess appeared. So... any ideas?

  Read the article

• How to import ejb project classes into web project on eclipse?

  - by Jhonnytunes

  I have 3 projects on eclipse, maven ejb project, maven wicket webapp project and a enterprise application project that includes ejb and web I mentioned before, as modules. But my question is, How from my web project can I use classes on the ejb project. Lets say ClassA is on the ejb project and I want to say from web project: ClassA cl = new ClassA. I wont be allowed since web project doesnt have ClassA but ejb project. I want to use ejb project as a Business Logic, JPA part. Also I want to include here some not beans classes that I want to use from the web. Dont know if its possible. The web project goes without Business logic, just the wicket pages calling ejb, and using ther classes. Im new in the EE world. Never made an ear file including a war and ejb jar for deploying it on Glassfish. Thanks in advanced.

  Read the article

• Adding page title to each page while creating a PDF file using itextsharp in VB.NET

  - by Snowy

  I have recently started using itextsharp and gradually learning it. So far I created a PDF file and it seems great. I have added a table and some subtables as the first table cells to hold data. It is done using two for loops. The first one loops through all data and the second one is each individual data displayed in columns. The html outcome looks like the following: <table> <tr> <td>Page title in center</td> </tr> <tr> <td> <table> <tr> <td>FirstPersonName</td> <td>Rank1</td> <td>info1a</td> <td>infob</td> <td>infoc</td> </tr> </table> </td> <td> <table> <tr> <td>SecondPersonName</td> <td>Rank2</td> <td>info1a</td> <td>infob</td> <td>infoc</td> <td>infod</td> <td>infoe</td> </tr> </table> </td> <td> <table> <tr> <td>ThirdPersonName</td> <td>Rank2</td> <td>info1a</td> <td>infob</td> <td>infoc</td> <td>infod</td> <td>infoe</td> <td>infof</td> <td>infog</td> </tr> </table> </td> </tr> </table> For page headings, I added a cell at the top before any other cells. I need to add this heading to all pages. Depending on the size of data, some pages have two rows and some pages have three rows of data. So I can not tell exactly when the new page starts to add the heading/title. My question is how to add the heading/title to all pages. I use VB.net. I searched for answer online and had no success. Your help would be greatly appreciated.

  Read the article

• Building a project in VS that depends on a static and dynamic library

  - by fg nu

  Noob noobin'. I would appreciate some very careful handholding in setting up an example in Visual Studio 2010 Professional where I am trying to build a project which links: a previously built static library, for which the VS project folder is "C:\libjohnpaul\" a previously built dynamic library, for which the VS project folder is "C:\libgeorgeringo\" These are listed as Recipes 1.11, 1.12 and 1.13 in the C++ Cookbook. The project fails to compile for me with unresolved dependencies (see details below), and I can't figure out why. Project 1: Static Library The following are the header and source files that were compiled in this project. I was able to compile this project fine in VS2010, to the named standard library "libjohnpaul.lib" which lives in the folder ("C:/libjohnpaul/Release/"). // libjohnpaul/john.hpp #ifndef JOHN_HPP_INCLUDED #define JOHN_HPP_INCLUDED void john( ); // Prints "John, " #endif // JOHN_HPP_INCLUDED // libjohnpaul/john.cpp #include <iostream> #include "john.hpp" void john( ) { std::cout << "John, "; } // libjohnpaul/paul.hpp #ifndef PAUL_HPP_INCLUDED #define PAUL_HPP_INCLUDED void paul( ); // Prints " Paul, " #endif // PAUL_HPP_INCLUDED // libjohnpaul/paul.cpp #include <iostream> #include "paul.hpp" void paul( ) { std::cout << "Paul, "; } // libjohnpaul/johnpaul.hpp #ifndef JOHNPAUL_HPP_INCLUDED #define JOHNPAUL_HPP_INCLUDED void johnpaul( ); // Prints "John, Paul, " #endif // JOHNPAUL_HPP_INCLUDED // libjohnpaul/johnpaul.cpp #include "john.hpp" #include "paul.hpp" #include "johnpaul.hpp" void johnpaul( ) { john( ); paul( ); Project 2: Dynamic Library Here are the header and source files for the second project, which also compiled fine with VS2010, and the "libgeorgeringo.dll" file lives in the directory "C:\libgeorgeringo\Debug". // libgeorgeringo/george.hpp #ifndef GEORGE_HPP_INCLUDED #define GEORGE_HPP_INCLUDED void george( ); // Prints "George, " #endif // GEORGE_HPP_INCLUDED // libgeorgeringo/george.cpp #include <iostream> #include "george.hpp" void george( ) { std::cout << "George, "; } // libgeorgeringo/ringo.hpp #ifndef RINGO_HPP_INCLUDED #define RINGO_HPP_INCLUDED void ringo( ); // Prints "and Ringo\n" #endif // RINGO_HPP_INCLUDED // libgeorgeringo/ringo.cpp #include <iostream> #include "ringo.hpp" void ringo( ) { std::cout << "and Ringo\n"; } // libgeorgeringo/georgeringo.hpp #ifndef GEORGERINGO_HPP_INCLUDED #define GEORGERINGO_HPP_INCLUDED // define GEORGERINGO_DLL when building libgerogreringo.dll # if defined(_WIN32) && !defined(__GNUC__) # ifdef GEORGERINGO_DLL # define GEORGERINGO_DECL _ _declspec(dllexport) # else # define GEORGERINGO_DECL _ _declspec(dllimport) # endif # endif // WIN32 #ifndef GEORGERINGO_DECL # define GEORGERINGO_DECL #endif // Prints "George, and Ringo\n" #ifdef __MWERKS__ # pragma export on #endif GEORGERINGO_DECL void georgeringo( ); #ifdef __MWERKS__ # pragma export off #endif #endif // GEORGERINGO_HPP_INCLUDED // libgeorgeringo/ georgeringo.cpp #include "george.hpp" #include "ringo.hpp" #include "georgeringo.hpp" void georgeringo( ) { george( ); ringo( ); } Project 3: Executable that depends on the previous libraries Lastly, I try to link the aforecompiled static and dynamic libraries into one project called "helloBeatlesII" which has the project directory "C:\helloBeatlesII" (note that this directory does not nest the other project directories). The linking process that I did is described below: To the "helloBeatlesII" solution, I added the solutions "libjohnpaul" and "libgeorgeringo"; then I changed the properties of the "helloBeatlesII" project to additionally point to the include directories of the other two projects on which it depends ("C:\libgeorgeringo\libgeorgeringo" & "C:\libjohnpaul\libjohnpaul"); added "libgeorgeringo" and "libjohnpaul" to the project dependencies of the "helloBeatlesII" project and made sure that the "helloBeatlesII" project was built last. Trying to compile this project gives me the following unsuccessful build: 1------ Build started: Project: helloBeatlesII, Configuration: Debug Win32 ------ 1Build started 10/13/2012 5:48:32 PM. 1InitializeBuildStatus: 1 Touching "Debug\helloBeatlesII.unsuccessfulbuild". 1ClCompile: 1 helloBeatles.cpp 1ManifestResourceCompile: 1 All outputs are up-to-date. 1helloBeatles.obj : error LNK2019: unresolved external symbol "void __cdecl georgeringo(void)" (?georgeringo@@YAXXZ) referenced in function _main 1helloBeatles.obj : error LNK2019: unresolved external symbol "void __cdecl johnpaul(void)" (?johnpaul@@YAXXZ) referenced in function _main 1E:\programming\cpp\vs-projects\cpp-cookbook\helloBeatlesII\Debug\helloBeatlesII.exe : fatal error LNK1120: 2 unresolved externals 1 1Build FAILED. 1 1Time Elapsed 00:00:01.34 ========== Build: 0 succeeded, 1 failed, 2 up-to-date, 0 skipped ========== At this point I decided to call in the cavalry. I am new to VS2010, so in all likelihood I am missing something straightforward.

  Read the article

• AutoVue at the Oracle Asset Lifecycle Management Summit

  - by celine.beck

  I recently had the opportunity to attend and present the integration between AutoVue and Primavera P6 during the Oracle ALM Summit, which was held in March at Redwood Shores, on Oracle Headquarters grounds. The ALM Summit brought together over 300 Oracle maintenance practitioners who endured the foggy and rainy San Francisco weather to attend the 4th edition of this Oracle-driven conference. Attendees have roles in maintenance management and IT. Following a general session, Ralph Rio from ARC Advisory Group provided a very interesting keynote session discussing Asset Management directions, both in the short and long run. An interesting point that Ralph raised is that most organizations have done a good job at improving performance at the design / build, operate and maintain and portfolio management phases by leveraging solutions like Asset Lifecycle Management and Project & Portfolio management solutions; however, there seem to be room for improvement in between those phases, when information flows from one group to the other, during the data handover phase or when time comes to update / modify drawings to reflect the reality of physical assets. This is where AutoVue comes into play. By integrating with enterprise applications like content management systems, asset lifecycle management applications and project management solutions, AutoVue can be a real-process enabler, streamlining information flows from concept/design to decommissioning and ensuring that all project stakeholders have access to asset information and engineering data throughout the asset lifecycle. AutoVue's built-in digital annotation capabilities allows maintenance workers and technicians to report changes in configuration and visually capture the delta between as-built and as-maintained versions of asset documents. This information can then be easily handed over to engineers who can identify changes and incorporate these modifications into the drawings during the next round of document revisions. PPL Power Generation, an electric utilities headquarted in Allentown, Pennsylvania discussed this usage of AutoVue during an interesting Webcast around AutoVue's role in the Utilities space. After the keynote sessions, participants broke off into product-centric tracks around Oracle's Asset Lifecycle Management solutions (E-Business Suite, PeopleSoft, and JD Edwards). The second day of the conference was the occasion for us to present the integration between AutoVue and Primavera P6 to the Maintenance Summit audience. The presentation was a great success and generated much discussion with partners and customers during breaks. People seemed highly interested in learning more about our plans for integrating AutoVue and Primavera P6 with Oracle's ALM solutions...stay tune for further information on the subject!

  Read the article

• Interacting with clients using project management systems

  - by Keyo

  I work in web development, that involves a lot of smaller custom projects rather than one large product. Requirements and specifications are always coming from outside the company. We've setup a ticket tracking system (Active Collab, which is rubbish compared to redmine btw) and given access to clients so they can submit issues. The idea being that less time is taken up with long phone conversations and emails. I think it can work really well if done right. However I'm not so sure it's always a good thing. Feature requests have gone up a lot on some projects. The system also needs to be friendly to non-developers while having the many features that developers use. Developers' tickets do not always map 1-to-1 with the tickets clients will create. So the requirements and broader tickets need to be separated from the more specific developer (specification) related tickets. Perhaps we could use two systems, one for clients to submit their requirements or describe a bug, and one for developers to create tickets like implement method x in class y. Maybe this can be achieved by structuring tickets into more appropriate categories or creating sub-tickets under a feature request ticket. I've briefly looked into Pivotal Tracker and it has a fundamentally different workflow. I would like to know how others are communicating with clients and keeping the technical workflow separate from the non-technical workflow. What tools do you use and how do you use them?

  Read the article

• The Basics of Project Management / Software Development

  - by Sam

  It suddenly struck me today that I have never developed any large application or worked with a team of programmers, and so am missing out a lot - both in terms of technical knowledge and the social-fun part of it. And I would like to rectify that - an idea is to start an open source group by training college students (for no charge) and developing some open source application with them. Please give me some basic advice on the whole process of how to (1) plan and (2) manage projects in a team. What new skill sets would you recommend? (I have read joel on software and 37 Signals, and got many insightful tips from them. But I'd like a little more technical knowledge ...) Background (freelancer, past 4+ years) - Computer engineer graphic / web designer online marketing moved on to programming in PHP, Perl, Python did Oracle DBA OCP training to understand DB's current self-assigned title - web application developer.

  Read the article

• Given a project and working with 1 other person - never worked with someone before

  - by Celeritas

  I'm taking a class where I work with a partner to implement the link layer of the OSI model. I've worked programmed with a partner once before and it went bad. Is the goal to divide the work up and decides who does what or should one person code and the other person reviews and switch roles after a while? Any tips are much appreciated. Literally I know nothing about working with a partner to program so even if it's basic please tell me.

  Read the article

• Overwhelmed by complex C#/ASP.NET project in Visual Studio 2008

  - by Darren Cook

  I have been hired as a junior programmer to work on projects that extend existing functionality in a very large, complex solution. The code base consists of C#, ASP.NET, jQuery, javascript, html and xml. I have some knowledge of all these in addition to fair knowledge of object-oriented programming and its fundamental concepts of inheritance, abstraction, polymorphism and encapsulation. I can follow code up through its base classes, interfaces, abstract classes and understand a large part of the code that I read while doing this. However, this solution is so humongous and so many things get tied together whenever I navigate through the code that I feel absolutely overwhelmed. I often find myself unable to fully follow everything that is going on with objects being serialized, large amounts of C# and javascript operating on the same pages and methods being called from template files that consist mainly of markup. I love learning about code, but trying to deal with this really stresses me out. Additionally, I do know that a significant amount of unit testing has been done but I know nothing about unit testing or how to utilize it. Any advice anyone could offer me regarding dealing with a large code base while using Visual Studio 2008 would be greatly appreciated. Are there tools that I can use to help get a handle on what is going on? Perhaps there are things even in Visual Studio that I am not aware of. How can I follow the code to low level functionality in order to get a better grasp of what is going on at a high level?

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >