Search Results

Search found 2226 results on 90 pages for 'promise raid'.

Page 8/90 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Hardware RAID Controller Support for SSD TRIM

  - by dss539

  Do any hardware RAID controllers available today support TRIM? If not, do any manufacturers have target dates for supporting TRIM? Should I even care about TRIM for SSDs installed in performance-sensitive workstations? Before you suggest it, yes software RAID would sidestep the issue, but my requirements do not allow software RAID. edit: The answer appears to be "no RAID controllers support TRIM" at the current date.

  Read the article

• Will setting up a RAID-0 array boost my IO performance?

  - by Absolute0

  I currently have a single 640 WD HDD with 16MB cache. Sometimes during heavy I/O usage the machine slows down. Would I benefit much by getting a second HDD identical to the first and setting up a RAID-0 array? My current setup is as follows: Core i5-750 cpu 4gb ram asus p7p55-m motherboard 9800gt nvidia gpu

  Read the article

• What level of RAID do I need to continue to operate correctly in case two drives in the array fail?

  - by Barney

  Which level of RAID will continue to operate correctly even after 2 drives in the array fail? RAID5, RAID6 or RAID10?

  Read the article

• Software Raid 10 on VirtualBox?

  - by user791022

  I want to learn how to use Software Raid 10, is it possible to use VirtualBox by adding four storage images? This is my plan: 4x 100mb partitions (1 on each drive) configured as a raid 1 for /boot in ext3. Then with the remaining space on each drive, setup a software raid partition and configure it to to LVM and raid 10. In the LVM, set up a 4gb swap partition and the remaining space as the root partition ( / ) as ext3.

  Read the article

• What is the SCSI RAID channels?

  - by erthad

  What is the SCSI RAID channels? I.e. what is the difference between, say, 1-channel RAID controller and 2-channel RAID controller? Is it for data throughput, number of RAID arrays I can create on controller, number of disks I can plug into controller or what else?

  Read the article

• Two Raid 1s in a single system?

  - by DebAtCQ

  I'm building a Raid array for the first time in my system and I have a question regarding having multiple Raid 1 arrays in a single Win 7 system. I'm a bit of an organizational freak with my data and I currently have two separate hard drives I want to mirror. The new motherboard I'm looking to buy supports Raid, so my question is this: a) can I have more than one Raid 1 array in a single system? b) would I have to buy a separate controller for the second array?

  Read the article

• Two Raid-1 arrays in a single system?

  - by DebAtCQ

  I'm building a Raid array for the first time in my system and I have a question regarding having multiple Raid-1 arrays in a single Win 7 system. I'm a bit of an organizational freak with my data and I currently have two separate hard drives I want to mirror. The new motherboard I'm looking to buy supports Raid, so my questions are: Can I have more than one Raid-1 array in a single system? Would I have to buy a separate controller for the second array?

  Read the article

• raid 0 failure, drives look fine

  - by Alan

  Hello, after a lovely blue screen my vista 64 machine decided to reconfigure one of my drives to no longer be part of my raid volume. So now my raid fails as it only has one member disk. This happened to me about 6 months ago and I just changed the disk in question back to a raid disk and all was well. However I cant seem to find that option in my bios or raid config anymore :( Any help would be appreciated

  Read the article

• How to disable automatic and forced fsck on disks in a linux software raid?

  - by mit

  This is the /etc/fstab entry of a raid system /dev/md4 that is controlled with mdadm and webmin on an ubuntu 10.04 64 server: /dev/md4 /mnt/md4 ext3 relatime 0 0 We tried to switch off automatic forced fsck on rebotts, as we prefer to implement our own scheduled fsck routine by setting the last parameter of the line to 0 (ZERO). But we found out the forced and automatic check still occurs on the underlying real disks, lets say sdb1 and sdc1. How can we switch that off?

  Read the article

• raid 0 failure, drives look fine

  - by Alan

  Hello, after a lovely blue screen my vista 64 machine decided to reconfigure one of my drives to no longer be part of my raid volume. So now my raid fails as it only has one member disk. This happened to me about 6 months ago and I just changed the disk in question back to a raid disk and all was well. However I cant seem to find that option in my bios or raid config anymore :( Any help would be appreciated

  Read the article

• RAID 5 RECONSTRUCT with RAID Reconstructor

  - by user22914

  I have Dell Poweredge server 2600 with Raid 5 in 3 hard drive Scsi 36gb each, it was fail to boot sinc the third drive is offline. I attached Sata card adapter to Sata hard drive and install OS SERVER 2003 to it, downloaded drivers for Raid and everything goes fine when I use recovery data software called "GetDataBack" from here http://www.runtime.org/data-recovery-software.htm but the problem that not all data recovered, I am still looking for importants data with about 5 GB size. I have another software called "RAID Reconstructor" from "http://www.runtime.org/raid.htm" I thought if I run it to reconstruct that will help to recover more data and put the third drive to be Online but I am afraid that might erase the current data in the other drives. Please I need your advise in how I could retrive the remaining data? Thanks

  Read the article

• Getting VMWare ESXi 5.0.0 with RAID using the Intel X79 chipset to work

  - by Deleted

  I have bought a new server where I use the motherboard ASUS P9X79 WS X79 S-2011 ATX. It will be used for virtualization, preferably using VMware vSphere Hypervisor™ (ESXi) if I can get the RAID on my motherboard working with VMWare (it does not detect it). The motherboard has the Intel® X79 chipset, which for RAID controller means vendor ID 8086 (Intel) and model ID 2826. When I boot the ESXi 5.0.0 installation media from my flash drive I can not see drives in the RAID5 set I created. Questions: Is there a VIB file for the RAID controller I can use? I have found one article at http://www.intel.com/support/motherboards/server/sb/CS-033313.htm on getting RAID to work with some Intel controllers, it lists 9 integrated RAID modules it is comptabile with. However, there is no mention of the X79 chipset.

  Read the article

• Reconfigure RAID on Dell PowerEdge T710

  - by Stefano Borini

  I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

  Read the article

• Advantages of multiple SQL Server files with a single RAID array

  - by Dr Giles M

  Originally posted on stack overflow, but re-worded. Imagine the scenario : For a database I have RAID arrays R: (MDF) T: (transaction log) and of course shared transparent usage of X: (tempDB). I've been reading around and get the impression that if you are using RAID then adding multiple SQL Server NDF files sitting on R: within a filegroup won't yeild any more improvements. Of course, adding another raid array S: and putting an NDF file on that would. However, being a reasonably savvy software person, it's not unthinkable to hypothesise that, even for smaller MDFs sitting on one RAID array that SQL Server will perform growth and locking operations (for writes) on the MDF, so adding NDFs to the filegroup even if they sat on R: would distribute the locking operations and growth operations allowing more throughput? Or does the time taken to reconstruct the data from distributed filegroups outweigh the benefits of reduced locking? I'm also aware that the behaviour and benefits may be different for tables/indeces/log. Is there a good site that distinguishes the benefits of multiple files when RAID is already in place?

  Read the article

• Does vmWare ESXi 4.0 U1 support the Promise SuperTrak EX8650 SATA card?

  - by RTNN

  Hi, can anyone tell me if vmWare ESXi 4.0 U1 has support for the Promise SuperTrak EX8650 SATA card? In the hardware support guide I find that VmWare should have support for the Promise SuperTrak EX8650 SATA card but only in version ESX 3.5. Is this card not supported for ESXi 4.0 U1 or what? From the hardware guide! Partner Name Model Manufacturer Device Type Supported Releases Promise SuperTrak EX8650 Promise Technology Inc SAS-RAID ESX 3.5 U5*1 1 , ESX 3.5 U4*1 1 Promise SuperTrak EX8760T Promise Technology Inc SAS ESX / ESXi 4.0 U1*2 2 , ESX / ESXi 4.0*2 2

  Read the article

• Do I need to rebuild the array after putting in a new hot spare?

  - by Shade34321

  So my experience with RAID is minimal. So I figured I'd come and ask here. We have a 16 drive RAID system that have 15 drives in RAID 5 with a hot spare left over. Recently one of the drives in the RAID was giving errors so I cloned it over to the hot spare and put a new drive in it's spot. I made the new drive the hot spare as I was told. I was told to rebuild the array after putting in the new drive as a hot spare so I tried and wasn't able to. So my question is do I need to rebuild it and if so why did it tell me I couldn't. Thanks! UPDATE: So I've come back up to work and looked at the RAID and it pulled in the hot spare into the raid and kicked out another drive.

  Read the article

• How to enable raid on Gigabyte G33M-S2L?

  - by Wabbitseason

  I'd like to set up RAID-1 on my Gigabyte G33M-S2L motherboard and for this reason I purchased two 1T hard drives. According to SiSoft Sandra the motherboard does support RAID but it is disabled. I looked everywhere in BIOS even upgraded it to the most recent version but found nothing that would have said "RAID" and the operating system I wish to install sees the two HDDs, not just a RAIDed one. What could be the problem? Does my motherboard support RAID (as the diagnostic tool claims) or do I need to buy a RAID card?

  Read the article

• Will disk cloning resolve bad stripes on RAID?

  - by user13323

  Hi. We have a logical RAID1 drive in bad stripes state, which kept that status even after replacement and rebuilding of both drives, and gives errors in Windows logs about failure of writing to disk. IBM support suggests erasing and re-creating the RAID, then re-installing the Windows. The resulting down-time unacceptible for us, so we want to clone the RAID (via Acronis True Image), erase and re-create the RAID, then dump the cloned data back. Following IBM logic where RAID erasing and re-creation resets the whole RAID meta-data, this should clear the bad-stripes status, and start from a blank page. Question is if such strategy is possible, and will produce the desired effect? Any idea is appreciated - thanks in advance!

  Read the article

• Openfiler RAID 10 option not found

  - by chrisling106

  Hi, I'm building a NAS using Openfiler2.3 (from 32-bit ISO), first of all I want to experiment it on VM first before going out and buy the harddrives needed. I created 5 virtual drives on VMware, sda is 2GB and the rest 1GB each (sdb to sde). I left sda blank and want to setup a RAID 10 disk using sdb, sdc, sdd and sde, 4 RAID partitions are setup successfully, but when I try to create a RAID device the only option for RAID level is 1, 0, 5 and 6. RAID 10 is not there! Can someone let me know what have I missed, please? TIA.

  Read the article

• Does RAID 1 protect against corruption?

  - by Shaun

  Does Raid 1 protect against data corruption? For example, let's say that I am keeping all of my important files on a NAS that uses 2 disks in a RAID 1. If one hard drive has some kind of internal problem and the data becomes corrupted, does the RAID recognize this automatically and correct it using data from the other good disk? Could it even know which copy is the good one? Does RAID 5 protect against corruption? I know that RAID is not a backup solution. I am trying to figure out how to make sure that I am not backing up corrupt data!

  Read the article

• How to view status of software RAID 1 resynching?

  - by tputkonen

  I have two 500 GB disks and yesterday I mirrored first drive to the second one using software RAID 1. PC has now been on for 30 hours. Both disks say "Resynching", but there is no progress indicator. In addition, there is a small yellow exclamation mark on both disks. My questions are: How long could the synch take for 500 GB drive with about 150 GB of data? PC has 4 GBs of RAM and AMD dual core 4000+ Is there a way to monitor status of the synching? How can I check what the exclamation mark means?

  Read the article

• How to recover data from software RAID 5 disk partition

  - by Ali n

  I have CentOS 5.8 on my computer, with 5x 1TB hard drives. I used software RAID. (RAID 1 as a boot partition md0, RAID 0 as a root partition md1 and RAID 5 as /home partition md3). Unfortunately one of these hard drives failed lately and I want to replace it with a new one. I want to know that is it possible to change this hard drive without data loss? The important partition is RAID 5 so in theory if one of hard drives failed I should be able to recover its data without any problem. But in practice how can I do that?

  Read the article

• VMWare Workstation Dev Machine Disks: one fast or four echofriendly raid?

  - by Avi

  I'm building a new dev computer. It will be running a few VMWare Worksation virtual machines - A dev machine running VS-2010, a build machine, a version-control machine, a web server for testing, a "personal" machine running office etc. I'll be connecting the computer to my stereo, so I'll also be running iTunes (possible on a dedicated VM) and I want the computer to be a silent one. I'll probably use an Antec P183 case. I was advised on Serverfault to use Raid10 for performance. Raid 10 uses 4 disks. So, my question is as follows: In terms of heat, noise, reliability, warranty, price, capacity and performance, what would you suggest: A Raid10 4 disk array using eco-friendly disks such as the $94 1TB Western Digital Caviar Green, or one high performance disk such as the 2TB Western Digital Caviar Black at $280?

  Read the article

• Certain drives in RAID 5 set intermittently are not recognized

  - by hydroparadise

  I have a curious problem in that 1 (sometimes 2) drives do not get recognized in a RAID 5 set. The server is getting rather old at 5 to 6 years, but still seems to function well once the machine sees all drives. So that leaves me with three areas to consider: the motherboard, the SATA RAID card, or the individual hard drives themselves. I am leaning toward the RAID card, but have not had much dealings with RAID cards. What would cause individual drives not to be recognized in the set? If it was the card, I would think that it would be all or nothing. If it were a single drive, is it possible that it would only work sometimes? The only other thing to consider is that that they are different drives (Seagate and Western Digital) but all around 80 GB. SATA RAID controller is 3ware Escalade 8506-4LP Motherboard is a SuperMicro P4SPA+ Am open and available for more details if needed...

  Read the article

• some questions about raid card

  - by cpps

  I have some questions about raid card. Use LSI MegaRAID® SAS 9260-8i raid card as a example. There is only two connection ports on the raid card, and they provide two cables that can connect 8 SAS/SATA storages. The document say it can connect "Maximum 32 drives per controller", I want to know how can I connect more than 8 hard disks with this card. Is that they say "Eight internal SATA+SAS ports" means they provide two cables which can connect 8 hard drives, but you can use other way to connect Maximum 32 drives? The other question. I see host bus adapter has raid integrated , so what is the difference between host bus adapter and raid card. Are they the same? I also know is SAS/SATA Expander's function only to connect more hard drives? Thanks in advance.

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >