Search Results

Search found 316 results on 13 pages for 'sip'.

Page 8/13 | < Previous Page | 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Home PBX to answer/take external calls via PSTN

    - by ageis23
    I have a Thomson 585V6 router which has built in voip support. I want to be able to use a softphone to make calls. for example phone my dad's mobile. Any incomming calls to my normal bt number should be taken via my pc as well. What I have done so far: I've wired the pstn port on the router to the telephone jack. The router is connected to my pc. I have installed asterisk on the pc I want to take calls on. The sip client authenticates to the sip server. output from twinkle: Sun 22:46:45 home, registration succeeded (expires = 3600 seconds) how do I take external calls/ answer incoming calls from pstn?

    Read the article

  • Search for specific call in asterisk log files

    - by chiborg
    In my Asterisk log file, I have a line like this (truncated): Executing [123@mycontext:1] Set("SIP/myhost-b7111840", "__INCOMINGCLI=4711") Now I want to do the following filtering while looking at the log file with tail -f: Match lines with a specific value for "INCOMINGCLI", storing the call ID (the "SIP/myhost-b7111840" part) Output all subsequent lines that contain the call ID. As a bonus, having a grep-like option like -A would be nice. I could do that easily in various programming languages, but how would I do it with standard UNIX commands like sed or awk? Can it be done with these commands?

    Read the article

  • asterisk outbound caller id

    - by MCS
    I'm trying to set the caller id number for an outbound call. My asterisk .call file looks like this: Channel: SIP/flowroute/1234567890 Context: test Extension: 1234567890 Priority: 1 Here's my extensions.conf: [test] exten => _1NXXXXXXXXX,1,Set(CALLERID(num)=8005552222) exten => _1NXXXXXXXXX,n,Dial(SIP/${EXTEN}@flowroute) exten => _1NXXXXXXXXX,n,Playback(hello-world) When I receive the call, the caller id number is 1-206-445-6979, even though the CDR log has both src and clid set to 8005552222. I'm using flowroute as my carrier. Is there something wrong on their side?

    Read the article

  • ASA 5540 v8.4(3) vpn to ASA 5505 v8.2(5), tunnel up but I cant ping from 5505 to IP on other side

    - by user223833
    I am having problems pinging from a 5505(remote) to IP 10.160.70.10 in the network behind the 5540(HQ side). 5505 inside IP: 10.56.0.1 Out: 71.43.109.226 5540 Inside: 10.1.0.8 out: 64.129.214.27 I Can ping from 5540 to 5505 inside 10.56.0.1. I also ran ASDM packet tracer in both directions, it is ok from 5540 to 5505, but drops the packet from 5505 to 5540. It gets through the ACL and dies at the NAT. Here is the 5505 config, I am sure it is something simple I am missing. ASA Version 8.2(5) ! hostname ASA-CITYSOUTHDEPOT domain-name rngint.net names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 10.56.0.1 255.255.0.0 ! interface Vlan2 nameif outside security-level 0 ip address 71.43.109.226 255.255.255.252 ! banner motd ***ASA-CITYSOUTHDEPOT*** banner asdm CITY SOUTH DEPOT ASA5505 ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name rngint.net access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.1.0.125 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list outside_1_cryptomap extended permit ip host 71.43.109.226 host 10.160.70.10 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 host 10.1.0.125 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.0.0.0 255.0.0.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.130.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip 10.56.0.0 255.255.0.0 10.106.70.0 255.255.255.0 access-list inside_nat0_outbound extended permit ip host 71.43.109.226 10.106.70.0 255.255.255.0 pager lines 24 logging enable logging buffer-size 25000 logging buffered informational logging asdm warnings mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 icmp permit any inside no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 71.43.109.225 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy aaa-server TACACS+ protocol tacacs+ aaa-server TACACS+ (inside) host 10.106.70.36 key ***** aaa authentication http console LOCAL aaa authentication ssh console LOCAL aaa authorization exec authentication-server http server enable http 192.168.1.0 255.255.255.0 inside http 10.0.0.0 255.0.0.0 inside http 0.0.0.0 0.0.0.0 outside snmp-server host inside 10.106.70.7 community ***** no snmp-server location no snmp-server contact snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs group1 crypto map outside_map 1 set peer 64.129.214.27 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh 10.0.0.0 255.0.0.0 inside ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside dhcpd auto_config outside ! dhcpd address 10.56.0.100-10.56.0.121 inside dhcpd dns 10.1.0.125 interface inside dhcpd auto_config outside interface inside ! dhcprelay server 10.1.0.125 outside dhcprelay enable inside dhcprelay setroute inside dhcprelay timeout 60 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept tftp-server inside 10.1.1.25 CITYSOUTHDEPOT-ASA-Confg webvpn tunnel-group 64.129.214.27 type ipsec-l2l tunnel-group 64.129.214.27 ipsec-attributes pre-shared-key ***** ! ! prompt hostname context

    Read the article

  • How to add new field(s) to the contact?

    - by user328302
    I want to add a Custom field to the ContactsContract content provider. I'm trying to build a Voip application and would like to add a SIP address(name@domain) field to it. What MIME type will I need to associate with it? Also I want to add a group address field which will have a list of group addresses in it (name@domain, name@domain,...). Wich MIME type will I have to associate with this type of field. I also want to add custom fields to the Call History like a session ID and SIP address(name@domain) field. How can I customize the call history? It'll be great if someone can give me an example.

    Read the article

  • Cisco ASA 5505 site to site IPSEC VPN won't route from multiple LANs

    - by franklundy
    Hi I've set up a standard site to site VPN between 2 ASA 5505s (using the wizard in ASDM) and have the VPN working fine for traffic between Site A and Site B on the directly connected LANs. But this VPN is actually to be used for data originating on LAN subnets that are one hop away from the directly connected LANs. So actually there is another router connected to each ASA (LAN side) that then route to two completely different LAN ranges, where the clients and servers reside. At the moment, any traffic that gets to the ASA that has not originated from the directly connected LAN gets sent straight to the default gateway, and not through the VPN. I've tried adding the additional subnets to the "Protected Networks" on the VPN, but that has no effect. I have also tried adding a static route to each ASA trying to point the traffic to the other side, but again this hasn't worked. Here is the config for one of the sites. This works for traffic to/from the 192.168.144.x subnets perfectly. What I need is to be able to route traffic from 10.1.0.0/24 to 10.2.0.0/24 for example. ASA Version 8.0(3) ! hostname Site1 enable password ** encrypted names name 192.168.144.4 Site2 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.144.2 255.255.255.252 ! interface Vlan2 nameif outside security-level 0 ip address 10.78.254.70 255.255.255.252 (this is a private WAN circuit) ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! passwd ** encrypted ftp mode passive access-list inside_access_in extended permit ip any any access-list outside_access_in extended permit icmp any any echo-reply access-list outside_1_cryptomap extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 access-list inside_nat0_outbound extended permit ip 192.168.144.0 255.255.255.252 Site2 255.255.255.252 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-603.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 access-group inside_access_in in interface inside access-group outside_access_in in interface outside route outside 0.0.0.0 0.0.0.0 10.78.254.69 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout uauth 0:05:00 absolute dynamic-access-policy-record DfltAccessPolicy aaa authentication ssh console LOCAL http server enable http 0.0.0.0 0.0.0.0 outside http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto map outside_map 1 match address outside_1_cryptomap crypto map outside_map 1 set pfs crypto map outside_map 1 set peer 10.78.254.66 crypto map outside_map 1 set transform-set ESP-3DES-SHA crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal telnet timeout 5 ssh 0.0.0.0 0.0.0.0 outside ssh timeout 5 console timeout 0 management-access inside threat-detection basic-threat threat-detection statistics port threat-detection statistics protocol threat-detection statistics access-list group-policy DfltGrpPolicy attributes vpn-idle-timeout none username enadmin password * encrypted privilege 15 tunnel-group 10.78.254.66 type ipsec-l2l tunnel-group 10.78.254.66 ipsec-attributes pre-shared-key * ! ! prompt hostname context

    Read the article

  • Cisco Pix how to add an additional block of static ip addresses for nat?

    - by Scott Szretter
    I have a pix 501 with 5 static ip addresses. My isp just gave me 5 more. I am trying to figure out how to add the new block and then how to nat/open at least one of them to an inside machine. So far, I named a new interface "intf2", ip range is 71.11.11.58 - 62 (gateway should 71.11.11.57) imgsvr is the machine I want to nat to one of the (71.11.11.59) new ip addresses. mail (.123) is an example of a machine that is mapped to the current existing 5 ip block (96.11.11.121 gate / 96.11.11.122-127) and working fine. Building configuration... : Saved : PIX Version 6.3(4) interface ethernet0 auto interface ethernet0 vlan1 logical interface ethernet1 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif vlan1 intf2 security1 enable password xxxxxxxxx encrypted passwd xxxxxxxxx encrypted hostname xxxxxxxPIX domain-name xxxxxxxxxxx no fixup protocol dns fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 no fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names ...snip... name 192.168.10.13 mail name 192.168.10.29 imgsvr object-group network vpn1 network-object mail 255.255.255.255 access-list outside_access_in permit tcp any host 96.11.11.124 eq www access-list outside_access_in permit tcp any host 96.11.11.124 eq https access-list outside_access_in permit tcp any host 96.11.11.124 eq 3389 access-list outside_access_in permit tcp any host 96.11.11.123 eq https access-list outside_access_in permit tcp any host 96.11.11.123 eq www access-list outside_access_in permit tcp any host 96.11.11.125 eq smtp access-list outside_access_in permit tcp any host 96.11.11.125 eq https access-list outside_access_in permit tcp any host 96.11.11.125 eq 10443 access-list outside_access_in permit tcp any host 96.11.11.126 eq smtp access-list outside_access_in permit tcp any host 96.11.11.126 eq https access-list outside_access_in permit tcp any host 96.11.11.126 eq 10443 access-list outside_access_in deny ip any any access-list inside_nat0_outbound permit ip 192.168.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.17.0.0 255.255.0.0 IPPool2 255.255.255.0 access-list inside_nat0_outbound permit ip 172.16.0.0 255.255.0.0 IPPool2 255.255.255.0 ...snip... access-list inside_access_in deny tcp any any eq smtp access-list inside_access_in permit ip any any pager lines 24 logging on logging buffered notifications mtu outside 1500 mtu inside 1500 ip address outside 96.11.11.122 255.255.255.248 ip address inside 192.168.10.15 255.255.255.0 ip address intf2 71.11.11.58 255.255.255.248 ip audit info action alarm ip audit attack action alarm pdm location exchange 255.255.255.255 inside pdm location mail 255.255.255.255 inside pdm location IPPool2 255.255.255.0 outside pdm location 96.11.11.122 255.255.255.255 inside pdm location 192.168.10.1 255.255.255.255 inside pdm location 192.168.10.6 255.255.255.255 inside pdm location mail-gate1 255.255.255.255 inside pdm location mail-gate2 255.255.255.255 inside pdm location imgsvr 255.255.255.255 inside pdm location 71.11.11.59 255.255.255.255 intf2 pdm logging informational 100 pdm history enable arp timeout 14400 global (outside) 1 interface global (outside) 2 96.11.11.123 global (intf2) 3 interface global (intf2) 4 71.11.11.59 nat (inside) 0 access-list inside_nat0_outbound nat (inside) 2 mail 255.255.255.255 0 0 nat (inside) 1 0.0.0.0 0.0.0.0 0 0 static (inside,outside) tcp 96.11.11.123 smtp mail smtp netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 https mail https netmask 255.255.255.255 0 0 static (inside,outside) tcp 96.11.11.123 www mail www netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.124 ts netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.126 mail-gate2 netmask 255.255.255.255 0 0 static (inside,outside) 96.11.11.125 mail-gate1 netmask 255.255.255.255 0 0 access-group outside_access_in in interface outside access-group inside_access_in in interface inside route outside 0.0.0.0 0.0.0.0 96.11.11.121 1 route intf2 0.0.0.0 0.0.0.0 71.11.11.57 2 timeout xlate 0:05:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute floodguard enable ...snip... : end [OK] Thanks!

    Read the article

  • Introducción a ENUM (E.164 Number Mapping)

    - by raul.goycoolea
    E.164 Number Mapping (ENUM o Enum) se diseñó para resolver la cuestión de como se pueden encontrar servicios de internet mediante un número telefónico, es decir cómo se pueden usar los los teléfonos, que solamente tienen 12 teclas, para acceder a servicios de Internet. La parte más básica de ENUM es por tanto la convergencia de las redes del STDP y la IP; ENUM hace que pueda haber una correspondencia entre un número telefónico y un identificador de Internet. En síntesis, Enum es un conjunto de protocolos para convertir números E.164 en URIs, y viceversa, de modo que el sistema de numeración E.164 tenga una función de correspondencia con las direcciones URI en Internet. Esta función es necesaria porque un número telefónico no tiene sentido en el mundo IP, ni una dirección IP tiene sentido en las redes telefónicas. Así, mediante esta técnica, las comunicaciones cuyo destino se marque con un número E.164, puedan terminar en el identificador correcto (número E.164 si termina en el STDP, o URI si termina en redes IP). La solución técnica de mirar en una base de datos cual es el identificador de destino tiene consecuencias muy interesantes, como que la llamada se pueda terminar donde desee el abonado llamado. Esta es una de las características que ofrece ENUM : el destino concreto, el terminal o terminales de terminación, no lo decide quien inicia la llamada o envía el mensaje sino la persona que es llamada o recibe el mensaje, que ha escrito sus preferencias en una base de datos. En otras palabras, el destinatario de la llamada decide cómo quiere ser contactado, tanto si lo que se le comunica es un email, o un sms, o telefax, o una llamada de voz. Cuando alguien quiera llamarle a usted, lo que tiene que hacer el llamante es seleccionar su nombre (el del llamado) en la libreta de direcciones del terminal o marcar su número ENUM. Una aplicación informática obtendrá de una base de datos los datos de contacto y disponibilidad que usted decidió. Y el mensaje le será remitido tal como usted especificó en dicha base de datos. Esto es algo nuevo que permite que usted, como persona llamada, defina sus preferencias de terminación para cualquier tipo de contenido. Por ejemplo, usted puede querer que todos los emails le sean enviados como sms o que los mensajes de voz se le remitan como emails; las comunicaciones ya no dependen de donde esté usted o deque tipo de terminal utiliza (teléfono, pda, internet). Además, con ENUM usted puede gestionar la portabilidad de sus números fijos y móviles. ENUM emplea una técnica de búsqueda indirecta en una base de datos que tiene los registros NAPTR ("Naming Authority Pointer Resource Records" tal como lo define el RFC 2915), y que utiliza el número telefónico Enum como clave de búsqueda, para obtener qué URIs corresponden a cada número telefónico. La base de datos que almacena estos registros es del tipo DNS.Si bien en uno de sus diversos usos sirve para facilitar las llamadas de usuarios de VoIP entre redes tradicionales del STDP y redes IP, debe tenerse en cuenta que ENUM no es una función de VoIP sino que es un mecanismo de conversión entre números/identificadores. Por tanto no debe ser confundido con el uso normal de enrutar las llamadas de VoIP mediante los protocolos SIP y H.323. ENUM puede ser muy útil para aquellas organizaciones que quieran tener normalizada la manera en que las aplicaciones acceden a los datos de comunicación de cada usuario. FundamentosPara que la convergencia entre el Sistema Telefónico Disponible al Público (STDP) y la Telefonía por Internet o Voz sobre IP (VoIP) y que el desarrollo de nuevos servicios multimedia tengan menos obstáculos, es fundamental que los usuarios puedan realizar sus llamadas tal como están acostumbrados a hacerlo, marcando números. Para eso, es preciso que haya un sistema universal de correspondencia de número a direcciones IP (y viceversa) y que las diferentes redes se puedan interconectar. Hay varias fórmulas que permiten que un número telefónico sirva para establecer comunicación con múltiples servicios. Una de estas fórmulas es el Electronic Number Mapping System ENUM, normalizado por el grupo de tareas especiales de ingeniería en Internet (IETF, Internet engineering task force), del que trata este artículo, que emplea la numeración E.164, los protocolos y la infraestructura telefónica para acceder indirectamente a diferentes servicios. Por tanto, se accede a un servicio mediante un identificador numérico universal: un número telefónico tradicional. ENUM permite comunicar las direcciones del mundo IP con las del mundo telefónico, y viceversa, sin problemas. Antes de entrar en mayores profundidades, conviene dar una breve pincelada para aclarar cómo se organiza la correspondencia entre números o URI. Para ello imaginemos una llamada que se inicia desde el servicio telefónico tradicional con destino a un número Enum. En ENUM Público, el abonado o usuario Enum a quien va destinada lallamada, habrá decidido incluir en la base de datos Enum uno o varios URI o números E.164, que forman una lista con sus preferencias para terminar la llamada. Y el sistema como se explica más adelante, elegirá cual es el número o URI adecuado para dicha terminación. Por tanto como resultado de la consulta a la base dedatos Enum siempre se da una relación unívoca entre el número Enum marcado y el de terminación, conforme a los deseos de la persona llamada.Variedades de ENUMUna posible fuente de confusión cuando se trata sobre ENUM es la variedad de soluciones o sistemas que emplean este calificativo. Lo habitual es que cuando se haga una referencia a ENUM se trate de uno de los siguientes casos: ENUM Público: Es la visión original de ENUM, como base de datos pública, parecida a un directorio, donde el abonado "opta" a ser incluido en la base de datos, que está gestionada en el dominio e164.arpa, delegando a cada país la gestión de la base de datos y la numeración. También se conoce como ENUM de usuario. Carrier ENUM, o ENUM Infraestructura, o de Operador: Cuando grupos de operadores proveedores de servicios de comunicaciones electrónicas acuerdan compartir la información de los abonados por medio de ENUM mediante acuerdos privados. En este caso son los operadores quienes controlan la información del abonado en vez de hacerlo (optar) los propios abonados. Carrier ENUM o ENUM de Operador también se conoce como Infrastructure ENUM o ENUM Infraestructura, y está siendo normalizado por IETF para la interconexión de VoIP (mediante acuerdos de peering). Como se explicará en la correspondiente sección, también se puede utilizar para la portabilidad o conservación de número. ENUM Privado: Un operador de telefonía o de VoIP, o un ISP, o un gran usuario, puede utilizar las técnicas de ENUM en sus redes y en las de sus clientes sin emplear DNS públicos, con DNS privados o internos. Resulta fácil imaginar como puede utilizarse esta técnica para que compañías multinacionales, o bancos, o agencias de viajes, tengan planes de numeración muy coherentes y eficaces. Cómo funciona ENUMPara conocer cómo funciona Enum, le remitimos a la página correspondiente a ENUM Público, puesto que esa variedad de Enum es la típica, la que dió lugar a todos los procedimientos y normas de IETF .Más detalles sobre: @page { margin: 0.79in } P { margin-bottom: 0.08in } H4 { margin-bottom: 0.08in } H4.ctl { font-family: "Lohit Hindi" } A:link { so-language: zxx } -- ENUM Público. En esta página se explica con cierto detalle como funciona Enum Carrier ENUM o ENUM de Operador ENUM Privado Normas técnicas: RFC 2915: NAPTR RR. The Naming Authority Pointer (NAPTR) DNS Resource Record RFC 3761: ENUM Protocol. The E.164 to Uniform Resource Identifiers (URI) Dynamic Delegation Discovery System (DDDS) Application (ENUM). (obsoletes RFC 2916). RFC 3762: Usage of H323 addresses in ENUM Protocol RFC 3764: Usage of SIP addresses in ENUM Protocol RFC 3824: Using E.164 numbers with SIP RFC 4769: IANA Registration for an Enumservice Containing Public Switched Telephone Network (PSTN) Signaling Information RFC 3026: Berlin Liaison Statement RFC 3953: Telephone Number Mapping (ENUM) Service Registration for Presence Services RFC 2870: Root Name Server Operational Requirements RFC 3482: Number Portability in the Global Switched Telephone Network (GSTN): An Overview RFC 2168: Resolution of Uniform Resource Identifiers using the Domain Name System Organizaciones relacionadas con ENUM RIPE - Adimistrador del nivel 0 de ENUM e164.arpa. ITU-T TSB - Unión Internacional de Telecomunicaciones ETSI - European Telecommunications Standards Institute VisionNG - Administrador del rango ENUM 878-10 IETF ENUM Chapter

    Read the article

  • Android 2.3 Gingerbread est disponible pour les développeurs, beaucoup d'améliorations dont un nouveau Garbage Collector

    Comme vous pouvez le constater sur le site Developpeurs d'Android, Android 2.3 Gingerbread est sorti. Au menu, un nouveau Garbage Collector, des améliorations pour l'accès aux fonctionnalités comme OpenGL ES ou les senseurs depuis un programme natif (en C), support des formats VP8, WebM, AAC et AMR, des nouveaux effets audio, la gestion d'une caméra pour la vidéo-conférence, support de SIP/VOIP, support de Near Field Communication

    Read the article

  • Package system broken - E: Sub-process /usr/bin/dpkg returned an error code (1)

    - by delha
    After installing some packages and libraries I have an error on Package Manager, I can't run any update because it says: "The package system is broken If you are using third party repositories then disable them, since they are a common source of problems. Now run the following command in a terminal: apt-get install -f " I've tried to do what it says and it returns me: jara@jara-Aspire-5738:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages were automatically installed and are no longer required: libcaca-dev libopencv2.3-bin nite-dev python-bluez ps-engine libslang2-dev python-sphinx ros-electric-geometry-tutorials ros-electric-geometry-visualization python-matplotlib libzzip-dev ros-electric-orocos-kinematics-dynamics ros-electric-physics-ode libbluetooth-dev libaudiofile-dev libassimp2 libnetpbm10-dev ros-electric-laser-pipeline python-epydoc ros-electric-geometry-experimental libasound2-dev evtest python-matplotlib-data libyaml-dev ros-electric-bullet ros-electric-executive-smach ros-electric-documentation libgl2ps0 libncurses5-dev ros-electric-robot-model texlive-fonts-recommended python-lxml libwxgtk2.8-dev daemontools libxxf86vm-dev libqhull-dev libavahi-client-dev ros-electric-geometry libgl2ps-dev libcurl4-openssl-dev assimp-dev libusb-1.0-0-dev libopencv2.3 ros-electric-diagnostics-monitors libsdl1.2-dev libjs-underscore libsdl-image1.2 tipa libusb-dev libtinfo-dev python-tz python-sip libfltk1.1 libesd0 libfreeimage-dev ros-electric-visualization x11proto-xf86vidmode-dev python-docutils libvtk5.6 ros-electric-assimp x11proto-scrnsaver-dev libnetcdf-dev libidn11-dev libeigen3-dev joystick libhdf5-serial-1.8.4 ros-electric-joystick-drivers texlive-fonts-recommended-doc esound-common libesd0-dev tcl8.5-dev ros-electric-multimaster-experimental ros-electric-rx libaudio-dev ros-electric-ros-tutorials libwxbase2.8-dev ros-electric-visualization-common python-sip-dev ros-electric-visualization-tutorials libfltk1.1-dev libpulse-dev libnetpbm10 python-markupsafe openni-dev tk8.5-dev wx2.8-headers freeglut3-dev libavahi-common-dev python-roman python-jinja2 ros-electric-robot-model-visualization libxss-dev libqhull5 libaa1-dev ros-electric-eigen freeglut3 ros-electric-executive-smach-visualization ros-electric-common-tutorials ros-electric-robot-model-tutorials libnetcdf6 libjs-sphinxdoc python-pyparsing libaudiofile0 Use 'apt-get autoremove' to remove them. The following extra packages will be installed: libcv-dev The following NEW packages will be installed libcv-dev 0 upgraded, 1 newly installed, 0 to remove and 4 not upgraded. 2 not fully installed or removed. Need to get 0 B/3,114 kB of archives. After this operation, 11.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 261801 files and directories currently installed.) Unpacking libcv-dev (from .../libcv-dev_2.1.0-7build1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb (-- unpack): trying to overwrite '/usr/bin/opencv_haartraining', which is also in package libopencv2.3-bin 2.3.1+svn6514+branch23-12~oneiric dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libcv-dev_2.1.0-7build1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I've tried everything people recommend on internet like: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install Also I've tried to install the synaptic manager but it doesn't let me install anything.. As you can see nothing works so I'm desperate! I'm using ubuntu 11.10, 64 bits Thanks!!

    Read the article

  • Silverlight Cream for December 29, 2010 -- #1018

    - by Dave Campbell
    In this Issue: Arik Poznanski, Derik Whittaker(-2-), Alex Knight, Maurice de Beijer, Jesse Liberty, Jason Ginchereau, Jeff Blankenburg, Mike Snow, and Peter Kuhn. Above the Fold: Silverlight: "Silverlight: Reading from a File Contained in your XAP" Mike Snow WP7: "A ReorderListBox for Windows Phone 7" Jason Ginchereau Expression Blend: "PathListBox: making rockin' animations" Alex Knight From SilverlightCream.com: Order in Chaos: Dependency Property Value Resolution Arik Poznanski sent me the link to his blog with this Dependency property value resolution post which demonstrates in successive detail xaml for each of the scenarios. Closing the Virtual Keyboard (SIP) and forcing binding in WP7 Derik Whittaker has a couple new posts up... this first is about how to close the SIP and forcing binding in a WP7 app... if you've run many WP7 apps I'm sure you understand the issue. Help my Slider control does not work inside a Grid in WP7 In Derik Whittaker's next post he details a problem he had with a Slider in a Grid that went AWOL... and how he resolved it.. also is asking why the solution works. PathListBox: making rockin' animations Holy Crap ... Alex Knight has his second PathListBox tutorial up and just stop reading and go check it out... dang! ... I'll still be here when you come back! Windows Phone 7, Animations and Data Binding Maurice de Beijer details an interesting problem he ran into where his databinding was hampering a page animation, what the root problem was and how he resolved it.. good information. Windows Phone From Scratch – Navigation Jesse Liberty has the next episode in the Windows Phone from Scratch series up and is talking about Navigation... he demos an ap with 3 pages and simple navigation this time. A ReorderListBox for Windows Phone 7 Found in Jeff Blankenburg's number 11, this post by Jason Ginchereau is a description of a Drag/Drop reodering ListBox drop-in for WP7 ... very cool, and source is on the post. What I Learned In WP7 – #Issue 11 Jeff Blankenburg's number 11 is a couple links itself... one to Jeff Wilcox for Silverlight UnitTest Framework, and one to Jason Ginchereau for Listbox Drag/Drop reordering... going to have to look that one up. Silverlight: Reading from a File Contained in your XAP Mike Snow's latest is on how to load up an extraneous file into your xap for loading at run-time and how to get that to actually work. XNA: Sophisticated primitives Peter Kuhn has a post up on using the XNA PrimitiveBatch class... he had trouble with it at first, and explains how to use it. XNA you say? ... think WP7. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • JSR Updates

    - by heathervc
    JSR 359, SIP Servlet 2.0, is a new JSR that has been submitted for JSR Review.  The review closes 16 July; the JSR Approval Ballot will be 17-20 July 2012. JSR 355, JCP Executive Committee Merge, has passed the Public Review Ballot and a Proposed Final Draft is now available for review. JSR 340, Java Servlet 3.1 Specification, has posted an Early Draft Review.  The review closes 1 August 2012.

    Read the article

  • Microsoft Office Communications Server 2007 R2 – Part II

    Once you have set up Office Communication Server 2007 R2 to provide IM within the rganisation, the next stage is to provide full telephony by setting up the OCS Mediation Server and the OCS Edge Server to connect ‘outside’ the organization, and escpecially to a SIP trunk provider of Internet phone services.

    Read the article

  • AsteriskNow Migration / Shared Extension Space

    - by Aaron C. de Bruyn
    I am testing the possibility of migrating from an old Avaya phone system to AsteriskNow. The migration would cover several hundred phones--but spread out over several years. (Management wants to move buildings to the new phone system one by one as cables get cut or time permits.) Two other directive is that extensions must not change and they want a GUI that other admins (non-Linux geeks) can manage. They currently use 9XXX for all extensions. We linked the Avaya and Asterisk box via PRI card and they both are communicating. From the Avaya side, if we move (for example) extension 9001 to Asterisk, we forward the call over the PRI to the AsteriskNow box and the SIP phone rings. In AsteriskNow we have an outgoing rule '_9XXX' that routes all 4-digit extensions starting with 9 back to Avaya. Here's the trouble. Dialing 9001 (the extension moved over to AsteriskNow) causes the call to be routed out the PRI to the Avaya box, then the Avaya box routes the call back to Asterisk, and Asterisk routes it to the SIP phone. As we get more and more users switched over, it will use up more and more channels over the PRI card. Is there a way I can ask Asterisk to check it's local extensions first--then forward off to the Avaya system if it starts with '_9XXX'? (I know how I can do it when editing the raw config files, I'm just looking for a way to do it in the GUI so other admins can manage it if necessary.) As a last-ditch plan, I know I can specifically add '_9001' as an outgoing call rule and sent it directly to extension 9001--but I'd really hate to do that for several hundred phones

    Read the article

  • Asterisk/FreePBX: Allow other Google Talk clients to ring when using motif module

    - by larsks
    I've recently installed FreePBX to act as a link between a SIP soft phone and my Google Talk account. It was easy to set up and outbound calls work just fine, but I've run into two problems with inbound calls that I'm not sure how to resolve. I'm using an inbound route to forward all calls from Google to my soft phone. If the soft phone is not currently registered, Asterisk answers and immediately generates a fast-busy signal (reporting CHANUNAVAIL in the logs), and the call is lost. If the soft phone is registered, Asterisk "answers" the call before rining the soft phone, which means that other Google Talk clients never ring (since from their perspective someone has answered the call). For solving (1) seems like I could use the ChanIsAvail() function (or this answer) to prevent Asterisk from answering in the event that the phone isn't registered. However, I'm not sure what to do about (2), because the behavior I want is for Asterisk to not "answer" the call until I answer the call on the soft phone. How do I configure Asterisk (ideally within the FreePBX framework) such that I can continue to receive calls at other Google Talk clients in addition to forwarding them to a SIP phone?

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • Make call with alternate provider if NOANSWER

    - by adaptive
    I have two voip providers, one free an the other paid. The free provider only allows local calls to certain area codes, so I need to fall back to the the paid provider if a call fails. At the moment, I have the following context in my extensions.conf file: [globals] ; freephoneline.ca PRIMARY_PROVIDER=fpl ; voip.ms SECONDARY_PROVIDER=voipms [local] exten => _NXXNXXXXXX,1,Set(CALLERID(name)=${OUTGOING_NAME}) exten => _NXXNXXXXXX,n,Dial(SIP/${EXTEN}@${PRIMARY_PROVIDER}) exten => _NXXNXXXXXX,n,Set(CALLERID(num)=${OUTGOING_NUMBER}) exten => _NXXNXXXXXX,n,Dial(SIP/1${EXTEN}@${SECONDARY_PROVIDER}) exten => _NXXNXXXXXX,n,Hangup() I checked the logs and noticed that the free provider responds with NOANSWER if a call is not allowed (Even though it plays a message). What I want is to: Try calling the ${PRIMARY_PROVIDER} first. If NOANSWER is returned by provider (not that the callee did not answer), then call with ${SECONDARY_PROVIDER} How can I modify my dial plan to get the desired results? EDIT : The primary provider is freephoneline.ca, and I'm using asterisk v1.8.2.3-2

    Read the article

  • Cisco PIX 515 doesn't seem to be passing traffic through according to static route

    - by Liquidkristal
    Ok, so I am having a spot of bother with a Cisco PIX515, I have posted the current running config below, now I am no cisco expert by any means although I can do basic stuff with them, now I am having trouble with traffic sent from the outside to address: 10.75.32.25 it just doesn't appear to be going anywhere. Now this firewall is deep inside a private network, with an upstream firewall that we don't manage. I have spoken to the people that look after that firewall and they say they they have traffic routing to 10.75.32.21 and 10.75.32.25 and thats it (although there is a website that runs from the server 172.16.102.5 which (if my understanding is correct) gets traffic via 10.75.32.23. Any ideas would be greatly appreciated as to me it should all just work, but its not (obviously if the config is all correct then there could be a problem with the web server that we are trying to access on 10.75.32.25, although the users say that they can get to it internally (172.16.102.8) which is even more confusing) PIX Version 6.3(3) interface ethernet0 auto interface ethernet1 auto interface ethernet2 auto nameif ethernet0 outside security0 nameif ethernet1 inside security100 nameif ethernet2 academic security50 fixup protocol dns maximum-length 512 fixup protocol ftp 21 fixup protocol h323 h225 1720 fixup protocol h323 ras 1718-1719 fixup protocol http 80 fixup protocol rsh 514 fixup protocol rtsp 554 fixup protocol sip 5060 fixup protocol sip udp 5060 fixup protocol skinny 2000 fixup protocol smtp 25 fixup protocol sqlnet 1521 fixup protocol tftp 69 names name 195.157.180.168 outsideNET name 195.157.180.170 globalNAT name 195.157.180.174 gateway name 195.157.180.173 Mail-Global name 172.30.31.240 Mail-Local name 10.75.32.20 outsideIF name 82.219.210.17 frogman1 name 212.69.230.79 frogman2 name 78.105.118.9 frogman3 name 172.16.0.0 acadNET name 172.16.100.254 acadIF access-list acl_outside permit icmp any any echo-reply access-list acl_outside permit icmp any any unreachable access-list acl_outside permit icmp any any time-exceeded access-list acl_outside permit tcp any host 10.75.32.22 eq smtp access-list acl_outside permit tcp any host 10.75.32.22 eq 8383 access-list acl_outside permit tcp any host 10.75.32.22 eq 8385 access-list acl_outside permit tcp any host 10.75.32.22 eq 8484 access-list acl_outside permit tcp any host 10.75.32.22 eq 8485 access-list acl_outside permit ip any host 10.75.32.30 access-list acl_outside permit tcp any host 10.75.32.25 eq https access-list acl_outside permit tcp any host 10.75.32.25 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq www access-list acl_outside permit tcp any host 10.75.32.23 eq https access-list acl_outside permit tcp host frogman1 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman2 host 10.75.32.23 eq ssh access-list acl_outside permit tcp host frogman3 host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.23 eq 2001 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8441 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8442 access-list acl_outside permit tcp host frogman1 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman2 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp host frogman3 host 10.75.32.24 eq 8443 access-list acl_outside permit tcp any host 10.75.32.23 eq smtp access-list acl_outside permit tcp any host 10.75.32.23 eq ssh access-list acl_outside permit tcp any host 10.75.32.24 eq ssh access-list acl_acad permit icmp any any echo-reply access-list acl_acad permit icmp any any unreachable access-list acl_acad permit icmp any any time-exceeded access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq www access-list acl_acad deny tcp any any eq www access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq https access-list acl_acad permit tcp any 10.0.0.0 255.0.0.0 eq 8080 access-list acl_acad permit tcp host 172.16.102.5 host 10.64.1.115 eq smtp pager lines 24 logging console debugging mtu outside 1500 mtu inside 1500 mtu academic 1500 ip address outside outsideIF 255.255.252.0 no ip address inside ip address academic acadIF 255.255.0.0 ip audit info action alarm ip audit attack action alarm pdm history enable arp timeout 14400 global (outside) 1 10.75.32.21 nat (academic) 1 acadNET 255.255.0.0 0 0 static (academic,outside) 10.75.32.22 Mail-Local netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.30 172.30.30.36 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.23 172.16.102.5 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.24 172.16.102.6 netmask 255.255.255.255 0 0 static (academic,outside) 10.75.32.25 172.16.102.8 netmask 255.255.255.255 0 0 access-group acl_outside in interface outside access-group acl_acad in interface academic route outside 0.0.0.0 0.0.0.0 10.75.32.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00 timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00 timeout uauth 0:05:00 absolute aaa-server TACACS+ protocol tacacs+ aaa-server RADIUS protocol radius aaa-server LOCAL protocol local snmp-server host outside 172.31.10.153 snmp-server host outside 172.31.10.154 snmp-server host outside 172.31.10.155 no snmp-server location no snmp-server contact snmp-server community CPQ_HHS no snmp-server enable traps floodguard enable telnet 172.30.31.0 255.255.255.0 academic telnet timeout 5 ssh timeout 5 console timeout 0 terminal width 120 Cryptochecksum:hi2u : end PIX515#

    Read the article

  • HTML Presence Controls for Communications Server 14 CodePlex Project

    Showing Presence on the Web If youre running Office Communicator Server 2007 R2, you know that your only out-of-the-box option for showing presence on the web is to use the NameControl ActiveX control that ships as part of Office.  Being an ActiveX control, this obviously means that youre limited to Internet Explorer.  Also, nobody likes ActiveX controls What if you want to show the presence of users in a pure ASP.NET or HTML application and cant assume that the user has Communicator installed you need anASP.NET or HTML presence control.  HTML Presence Controls for Microsoft Communications Server 14 We recently worked with the UC team at Microsoft on a keynote demo for TechEd 2010 in New Orleans.  The demo was for a fictitious airline Fabrikam Airlines that wanted to show the presence of customer service and reservations agents on its website.  Customers could also start an instant message conversation with the agents using a Silverlight web chat window that used WCF to communicate with the backend UCMA application. We built HTML Presence Controls that use AJAX to poll a REST-based WCF service running in IIS and hosting a UCMA 3.0 presence subscription application.   Microsoft has graciously allowed us to publish these on CodePlex so that the development community can benefit from them:  http://htmlpresencecontrols.codeplex.com/ We will be maintaining the CodePlex project as new builds of UCMA 3.0 become available.  Check out the project home page on CodePlex for some more in-depth details on how the controls are implemented. ASP.NET Server Control Implementation Were providing an ASP.NET Server Control implementation that you can use stand-alone or in a GridView or Repeater (or other layout control).  The control has properties that allow you to control its appearance, e.g. you can choose whether or not to show the contacts name or availability text. You can also use the server control in a layout control such as a GridView by putting it in a TemplateColumn and binding to the Sip Uri in the data source. Disclaimer Once we started working on these, we realized why Microsoft hasnt shipped such controls as part of the product.  There are some tradeoffs you have to be aware of when using these controls, heres the high level. Privacy The backend UCMA 3.0 application that subscribes to presence of contacts runs as a trusted application and can thus retrieve the presence of any user in the organization.  Theres currently no good way in UCMA to apply any privacy rules to ensure that the consumer of the presence controls has permission to see the presence of the contacts that the controls are bound to.  Just to be absolutely crystal clear These controls provide a way to query the presence of any user in the organization, regardless of the privacy relationship between the person consuming the controls and the contacts whose presence is being displayed. Were exploring options for a design pattern that would allow you to inject some privacy controls.  Keep in mind though that you would most likely be responsible for implementing this logic, as there is currently no functionality in UCMA that allows you to do that. Polling the WCF REST Service The controls poll the backend WCF service to retrieve the presence of contacts - you can control the refresh interval so that they poll less often. We implemented a caching layer so that the WCF service is always communicating with a presence cache it never communicates directly with Communications Server.  For example, if your web page is showing the presence of sip:[email protected] and 500 people have the page open, the presence cache only contains one instance of the subscription Communications Server is not being polled 500 times for the presence of that contact. Once the presence of a contact changes, it is updated in the cache.  There are some server-based push mechanisms that would work nicely here, such as the one that Outlook Web Access 2010 uses.  Unfortunately we didnt have time to explore these options. Community Contribution Take a look at the project Issue Tracker, there are a couple of things we can use some help with.  Shoot me a note if youre interested in contributing to the project. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Silverlight Cream for May 15, 2010 -- #862

    - by Dave Campbell
    In this Issue: Victor Gaudioso, Antoni Dol(-2-), Brian Genisio, Shawn Wildermuth, Mike Snow, Phil Middlemiss, Pete Brown, Kirupa, Dan Wahlin, Glenn Block, Jeff Prosise, Anoop Madhusudanan, and Adam Kinney. Shoutouts: Victor Gaudioso would like you to Checkout my Interview with Microsoft’s Murray Gordon at MIX 10 Pete Brown announced: Connected Show Podcast #29 With … Me! From SilverlightCream.com: New Silverlight Video Tutorial: How to Create Fast Forward for the MediaElement Victor Gaudioso's latest video tutorial is on creating the ability to fast-forward a MediaElement... check it out in the tutorial player itself! Overlapping TabItems with the Silverlight Toolkit TabControl Antoni Dol has a very cool tutorial up on the Toolkit TabItems control... not only is he overlapping them quite nicely but this is a very cool tutorial... QuoteFloat: Animating TextBlock PlaneProjections for a spiraling effect in Silverlight Antoni Dol also has a Blend tutorial up on animating TextBlock items... run the demo and you'll want to read the rest :) Adventures in MVVM – My ViewModel Base – Silverlight Support! Brian Genisio continues his MVVM tutorials with this update on his ViewModel base using some new C# 4.0 features, and fully supports Silverlight and WPF My Thoughts on the Windows Phone 7 Shawn Wildermuth gives his take on WP7. He included a port of his XBoxGames app to WP7 ... thanks Shawn! Silverlight Tip of the Day #20 – Using Tooltips in Silverlight I figured Mike Snow was going to overrun me with tips since I have missed a couple days, but there's only one! ... and it's on Tooltips. Animating the Silverlight opacity mask Phil Middlemiss has an article at SilverZine describing a Behavior he wrote (and is sharing) that turns a FrameworkElement into an opacity mask for it's parent container... cool demo on the page too. Breaking Apart the Margin Property in Xaml for better Binding Pete Brown dug in on a Twitter message and put some thoughts down about breaking a Margin apart to see about binding to the individual elements. Building a Simple Windows Phone App Kirupa has a 6-part tutorial up on building not-your-typical first WP7 application... all good stuff! Integrating HTML into Silverlight Applications Dan Wahlin has a post up discussing three ways to display HTML inside a Silverlight app. Hello MEF in Silverlight 4 and VB! (with an MVVM Light cameo) Glenn Block has a post up discussing MEF, MVVM, and it's in VB this time... and it's actually a great tutorial top to bottom... all source included of course :) Understanding Input Scope in Silverlight for Windows Phone Jeff Prosise has a good post up on the WP7 SIP and how to set the proper InputScope to get the SIP you want. Thinking about Silverlight ‘desktop’ apps – Creating a Standalone Installer for offline installation (no browser) Anoop Madhusudanan is discussing something that's been floating around for a while... installing Silverlight from, say, a CD or DVD when someone installs your app. He's got some good code, but be sure to read Tim Heuer and Scott Guthrie's comments, and consider digging deeper into that part. Using FluidMoveBehavior to animate grid coordinates in Silverlight Adam Kinney has a cool post up on animating an object using the FluidMotionBehavior of Blend 4... looks great moving across a checkerboard... check out the demo, then grab the code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • .NET CF -- Set Form height based on InputPanel state

    - by user354941
    Hi, So, I've got a C# project for Windows Mobile phones and I'm trying to work with the InputPanel. Specifically, I've got one form with a stack of Labels and TextBoxes that collect user input. I have an InputPanel that alerts me when the user opens the SIP. Everything works fine so far. When I get messages that the SIP status has changed, I want to change the height of the Form, which doesn't seem possible. Here's my event handler for my InputPanel: void m_InputPanel_EnabledChanged(object sender, EventArgs e) { // :( this assignment operation doesn't work and it doesn't this.ClientSize = inputPanel1.VisibleDesktop.Size; // doesn't work this.Size = inputPanel1.VisibleDesktop.Size; // assignment operation works, but isn't very useful this.visibleHeight = inputPanel1.VisibleDesktop.Height; this.InitializeUI(); } When I say that the assignment operation doesn't work, I mean that the values don't change in the debugger. I can understand that maybe I can't change the size of a Form, but I can't understand why trying to change it wouldn't throw an exception, or give a compiler error. I have my Form WindowState set to Normal instead of Maximized, but it doesn't make a difference. Also, I have read http://www.christec.co.nz/blog/archives/42 this page that tells me how I'm supposed to do this, but I can't easily put all of my controls in a Panel because I'm using a bunch of custom stuff to do alpha background controls.

    Read the article

  • Iterate Through JSON Data for Specific Element - Similar to XPath

    - by Highroller
    I am working on an embedded system and my theory of the overall process follows this methodology: 1. Send a command to the back end asking for account information in JSON format. 2. The back end writes a JSON file with all accounts and associated information (there could be 0 to 16 accounts). 3. Here's where I get stuck - use JavaScript (we are using the JQuery library) to iterate through the returned information for a specific element (similar to XPath) and build an array based on the number of elements found to populate a drop-down box to select the account you want to view and then do stuff with the account info. So my code looks like this: loadAccounts = function() { $.getJSON('/info?q=voip.accounts[]', function(result) { var sipAcnts = $("#sipacnts"); $(sipAcnts).empty(); // empty the dropdown (if necessarry) // Get the 'label' element and stick it in an array // build the array and append it to the sipAcnts dropdown // use array index to ref the accounts info and do stuff with it } So what I need is the JSON version of XPath to build the array of voip.accounts.label. The first account info looks something like this: { "result_set": { "voip.accounts[0]": { "label": "Dispatch1", "enabled": true, "user": "1234", "name": "Jane Doe", "type": "sip", "sip": { "lots and lots of stuff": }, } } } Am I over complicating the issue? Any wisdom anyone could thrown down would be greatly appreciated.

    Read the article

  • ASA hairpining: I basicaly want to allow 2 spokes to be able to communicate with each other.

    - by Thirst4Knowledge
    ASA Spoke to Spoke Communication I have been looking at spke to spoke comms or "hairpining" for months and have posted on numerouse forums but to no avail. I have a Hub and spoke network where the HUB is an ASA Firewall version 8.2 * I basicaly want to allow 2 spokes to be able to communicate with each other. I think that I have got the concept of the ASA Config for example: same-security-traffic permit intra-interface access-list HQ-LAN extended permit ip ASA-LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list HQ-LAN extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip 192.168.99.0 255.255.255.0 HQ-LAN 255.255.255.0 I think my problem may be that the other spokes are not CIsco Firewalls and I need to work out how to do the alternative setups. I want to at least make sure that my firewall etup is correct then I can move onto the other spokes here is my config: Hostname ASA domain-name mydomain.com names ! interface Ethernet0/0 speed 100 duplex full nameif outside security-level 0 ip address 1.1.1.246 255.255.255.224 ! interface Ethernet0/1 speed 100 duplex full nameif inside security-level 100 ip address 192.168.240.33 255.255.255.224 ! interface Ethernet0/2 description DMZ VLAN-253 speed 100 duplex full nameif DMZ security-level 50 ip address 192.168.254.1 255.255.255.0 ! interface Ethernet0/3 no nameif no security-level no ip address ! boot system disk0:/asa821-k8.bin ftp mode passive clock timezone GMT/BST 0 dns server-group DefaultDNS domain-name mydomain.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object-group network ASA_LAN_Plus_HQ_LAN network-object ASA_LAN 255.255.248.0 network-object HQ-LAN 255.255.255.0 access-list outside_acl remark Exchange web access-list outside_acl extended permit tcp any host MS-Exchange_server-NAT eq https access-list outside_acl remark PPTP Encapsulation access-list outside_acl extended permit gre any host MS-ISA-Server-NAT access-list outside_acl remark PPTP access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq pptp access-list outside_acl remark Intra Http access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq www access-list outside_acl remark Intra Https access-list outside_acl extended permit tcp any host MS-ISA-Server-NAT eq https access-list outside_acl remark SSL Server-Https 443 access-list outside_acl remark Https 8443(Open VPN Custom port for SSLVPN client downlaod) access-list outside_acl remark FTP 20 access-list outside_acl remark Http access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT object-group DM_INLINE_TCP_1 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq 8443 access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq www access-list outside_acl remark For secure remote Managment-SSH access-list outside_acl extended permit tcp any host OpenVPN-Srvr-NAT eq ssh access-list outside_acl extended permit ip Genimage_Anyconnect 255.255.255.0 ASA_LAN 255.255.248.0 access-list ASP-Live remark Live ASP access-list ASP-Live extended permit ip ASA_LAN 255.255.248.0 192.168.60.0 255.255.255.0 access-list Bo remark Bo access-list Bo extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list Bill remark Bill access-list Bill extended permit ip ASA_LAN 255.255.248.0 Bill.15 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Bill.5 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.160.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.169.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.176.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list no-nat extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list no-nat extended permit ip ASA_LAN 255.255.248.0 Genimage_Anyconnect 255.255.255.0 access-list no-nat extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list no-nat extended permit ip HQ-LAN 255.255.255.0 North-Office-LAN 255.255.255.0 access-list no-nat extended permit ip North-Office-LAN 255.255.255.0 HQ-LAN 255.255.255.0 access-list Car remark Car access-list Car extended permit ip ASA_LAN 255.255.248.0 192.168.165.0 255.255.255.0 access-list Che remark Che access-list Che extended permit ip ASA_LAN 255.255.248.0 192.168.144.0 255.255.255.0 access-list Chi remark Chi access-list Chi extended permit ip ASA_LAN 255.255.248.0 192.168.140.0 255.255.255.0 access-list Cla remark Cla access-list Cla extended permit ip ASA_LAN 255.255.248.0 192.168.152.0 255.255.255.0 access-list Eas remark Eas access-list Eas extended permit ip ASA_LAN 255.255.248.0 192.168.149.0 255.255.255.0 access-list Ess remark Ess access-list Ess extended permit ip ASA_LAN 255.255.248.0 192.168.153.0 255.255.255.0 access-list Gat remark Gat access-list Gat extended permit ip ASA_LAN 255.255.248.0 192.168.163.0 255.255.255.0 access-list Hud remark Hud access-list Hud extended permit ip ASA_LAN 255.255.248.0 192.168.157.0 255.255.255.0 access-list Ilk remark Ilk access-list Ilk extended permit ip ASA_LAN 255.255.248.0 192.168.167.0 255.255.255.0 access-list Ken remark Ken access-list Ken extended permit ip ASA_LAN 255.255.248.0 192.168.156.0 255.255.255.0 access-list North-Office remark North-Office access-list North-Office extended permit ip ASA_LAN 255.255.248.0 North-Office-LAN 255.255.255.0 access-list inside_acl remark Inside_ad access-list inside_acl extended permit ip any any access-list Old_HQ remark Old_HQ access-list Old_HQ extended permit ip ASA_LAN 255.255.248.0 HQ-LAN 255.255.255.0 access-list Old_HQ extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 access-list She remark She access-list She extended permit ip ASA_LAN 255.255.248.0 192.168.150.0 255.255.255.0 access-list Lit remark Lit access-list Lit extended permit ip ASA_LAN 255.255.248.0 192.168.143.0 255.255.255.0 access-list Mid remark Mid access-list Mid extended permit ip ASA_LAN 255.255.248.0 192.168.137.0 255.255.255.0 access-list Spi remark Spi access-list Spi extended permit ip ASA_LAN 255.255.248.0 192.168.162.0 255.255.255.0 access-list Tor remark Tor access-list Tor extended permit ip ASA_LAN 255.255.248.0 192.168.166.0 255.255.255.0 access-list Tra remark Tra access-list Tra extended permit ip ASA_LAN 255.255.248.0 192.168.168.0 255.255.255.0 access-list Tru remark Tru access-list Tru extended permit ip ASA_LAN 255.255.248.0 192.168.174.0 255.255.255.0 access-list Yo remark Yo access-list Yo extended permit ip ASA_LAN 255.255.248.0 192.168.127.0 255.255.255.0 access-list Nor remark Nor access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.159.0 255.255.255.0 access-list Nor extended permit ip ASA_LAN 255.255.248.0 192.168.173.0 255.255.255.0 inactive access-list ST remark ST access-list ST extended permit ip ASA_LAN 255.255.248.0 192.168.175.0 255.255.255.0 access-list Le remark Le access-list Le extended permit ip ASA_LAN 255.255.248.0 192.168.161.0 255.255.255.0 access-list DMZ-ACL remark DMZ access-list DMZ-ACL extended permit ip host OpenVPN-Srvr any access-list no-nat-dmz remark DMZ -No Nat access-list no-nat-dmz extended permit ip 192.168.250.0 255.255.255.0 HQ-LAN 255.255.255.0 access-list Split_Tunnel_List remark ASA-LAN access-list Split_Tunnel_List standard permit ASA_LAN 255.255.248.0 access-list Split_Tunnel_List standard permit Genimage_Anyconnect 255.255.255.0 access-list outside_cryptomap_30 remark Po access-list outside_cryptomap_30 extended permit ip ASA_LAN 255.255.248.0 Po 255.255.255.0 access-list outside_cryptomap_24 extended permit ip ASA_LAN 255.255.248.0 192.168.100.0 255.255.255.0 access-list outside_cryptomap_16 extended permit ip ASA_LAN 255.255.248.0 192.168.99.0 255.255.255.0 access-list outside_cryptomap_34 extended permit ip ASA_LAN 255.255.248.0 10.10.10.0 255.255.255.0 access-list outside_31_cryptomap extended permit ip host 192.168.240.34 Cisco-admin-LAN 255.255.255.0 access-list outside_32_cryptomap extended permit ip host Tunnel-DC host HQ-SDSL-Peer access-list Genimage_VPN_Any_connect_pix_client remark Genimage "Any Connect" VPN access-list Genimage_VPN_Any_connect_pix_client standard permit Genimage_Anyconnect 255.255.255.0 access-list Split-Tunnel-ACL standard permit ASA_LAN 255.255.248.0 access-list nonat extended permit ip HQ-LAN 255.255.255.0 192.168.99.0 255.255.255.0 pager lines 24 logging enable logging timestamp logging console notifications logging monitor notifications logging buffered warnings logging asdm informational no logging message 106015 no logging message 313001 no logging message 313008 no logging message 106023 no logging message 710003 no logging message 106100 no logging message 302015 no logging message 302014 no logging message 302013 no logging message 302018 no logging message 302017 no logging message 302016 no logging message 302021 no logging message 302020 flow-export destination inside MS-ISA-Server 2055 flow-export destination outside 192.168.130.126 2055 flow-export template timeout-rate 1 flow-export delay flow-create 15 mtu outside 1500 mtu inside 1500 mtu DMZ 1500 mtu management 1500 ip local pool RAS-VPN 10.0.0.1.1-10.0.0.1.254 mask 255.255.255.255 icmp unreachable rate-limit 1 burst-size 1 icmp permit any unreachable outside icmp permit any echo outside icmp permit any echo-reply outside icmp permit any outside icmp permit any echo inside icmp permit any echo-reply inside icmp permit any echo DMZ icmp permit any echo-reply DMZ asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 nat-control global (outside) 1 interface global (inside) 1 interface nat (inside) 0 access-list no-nat nat (inside) 1 0.0.0.0 0.0.0.0 nat (DMZ) 0 access-list no-nat-dmz static (inside,outside) MS-ISA-Server-NAT MS-ISA-Server netmask 255.255.255.255 static (DMZ,outside) OpenVPN-Srvr-NAT OpenVPN-Srvr netmask 255.255.255.255 static (inside,outside) MS-Exchange_server-NAT MS-Exchange_server netmask 255.255.255.255 access-group outside_acl in interface outside access-group inside_acl in interface inside access-group DMZ-ACL in interface DMZ route outside 0.0.0.0 0.0.0.0 1.1.1.225 1 route inside 10.10.10.0 255.255.255.0 192.168.240.34 1 route outside Genimage_Anyconnect 255.255.255.0 1.1.1.225 1 route inside Open-VPN 255.255.248.0 OpenVPN-Srvr 1 route inside HQledon-Voice-LAN 255.255.255.0 192.168.240.34 1 route outside Bill 255.255.255.0 1.1.1.225 1 route outside Yo 255.255.255.0 1.1.1.225 1 route inside 192.168.129.0 255.255.255.0 192.168.240.34 1 route outside HQ-LAN 255.255.255.0 1.1.1.225 1 route outside Mid 255.255.255.0 1.1.1.225 1 route outside 192.168.140.0 255.255.255.0 1.1.1.225 1 route outside 192.168.143.0 255.255.255.0 1.1.1.225 1 route outside 192.168.144.0 255.255.255.0 1.1.1.225 1 route outside 192.168.149.0 255.255.255.0 1.1.1.225 1 route outside 192.168.152.0 255.255.255.0 1.1.1.225 1 route outside 192.168.153.0 255.255.255.0 1.1.1.225 1 route outside North-Office-LAN 255.255.255.0 1.1.1.225 1 route outside 192.168.156.0 255.255.255.0 1.1.1.225 1 route outside 192.168.157.0 255.255.255.0 1.1.1.225 1 route outside 192.168.159.0 255.255.255.0 1.1.1.225 1 route outside 192.168.160.0 255.255.255.0 1.1.1.225 1 route outside 192.168.161.0 255.255.255.0 1.1.1.225 1 route outside 192.168.162.0 255.255.255.0 1.1.1.225 1 route outside 192.168.163.0 255.255.255.0 1.1.1.225 1 route outside 192.168.165.0 255.255.255.0 1.1.1.225 1 route outside 192.168.166.0 255.255.255.0 1.1.1.225 1 route outside 192.168.167.0 255.255.255.0 1.1.1.225 1 route outside 192.168.168.0 255.255.255.0 1.1.1.225 1 route outside 192.168.173.0 255.255.255.0 1.1.1.225 1 route outside 192.168.174.0 255.255.255.0 1.1.1.225 1 route outside 192.168.175.0 255.255.255.0 1.1.1.225 1 route outside 192.168.99.0 255.255.255.0 1.1.1.225 1 route inside ASA_LAN 255.255.255.0 192.168.240.34 1 route inside 192.168.124.0 255.255.255.0 192.168.240.34 1 route inside 192.168.50.0 255.255.255.0 192.168.240.34 1 route inside 192.168.51.0 255.255.255.128 192.168.240.34 1 route inside 192.168.240.0 255.255.255.224 192.168.240.34 1 route inside 192.168.240.164 255.255.255.224 192.168.240.34 1 route inside 192.168.240.196 255.255.255.224 192.168.240.34 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server vpn protocol radius max-failed-attempts 5 aaa-server vpn (inside) host 192.168.X.2 timeout 60 key a5a53r3t authentication-port 1812 radius-common-pw a5a53r3t aaa authentication ssh console LOCAL aaa authentication http console LOCAL http server enable http 0.0.0.0 0.0.0.0 inside http 1.1.1.2 255.255.255.255 outside http 1.1.1.234 255.255.255.255 outside http 0.0.0.0 0.0.0.0 management http 1.1.100.198 255.255.255.255 outside http 0.0.0.0 0.0.0.0 outside crypto map FW_Outside_map 1 match address Bill crypto map FW_Outside_map 1 set peer x.x.x.121 crypto map FW_Outside_map 1 set transform-set SECURE crypto map FW_Outside_map 2 match address Bo crypto map FW_Outside_map 2 set peer x.x.x.202 crypto map FW_Outside_map 2 set transform-set SECURE crypto map FW_Outside_map 3 match address ASP-Live crypto map FW_Outside_map 3 set peer x.x.x.113 crypto map FW_Outside_map 3 set transform-set SECURE crypto map FW_Outside_map 4 match address Car crypto map FW_Outside_map 4 set peer x.x.x.205 crypto map FW_Outside_map 4 set transform-set SECURE crypto map FW_Outside_map 5 match address Old_HQ crypto map FW_Outside_map 5 set peer x.x.x.2 crypto map FW_Outside_map 5 set transform-set SECURE WG crypto map FW_Outside_map 6 match address Che crypto map FW_Outside_map 6 set peer x.x.x.204 crypto map FW_Outside_map 6 set transform-set SECURE crypto map FW_Outside_map 7 match address Chi crypto map FW_Outside_map 7 set peer x.x.x.212 crypto map FW_Outside_map 7 set transform-set SECURE crypto map FW_Outside_map 8 match address Cla crypto map FW_Outside_map 8 set peer x.x.x.215 crypto map FW_Outside_map 8 set transform-set SECURE crypto map FW_Outside_map 9 match address Eas crypto map FW_Outside_map 9 set peer x.x.x.247 crypto map FW_Outside_map 9 set transform-set SECURE crypto map FW_Outside_map 10 match address Ess crypto map FW_Outside_map 10 set peer x.x.x.170 crypto map FW_Outside_map 10 set transform-set SECURE crypto map FW_Outside_map 11 match address Hud crypto map FW_Outside_map 11 set peer x.x.x.8 crypto map FW_Outside_map 11 set transform-set SECURE crypto map FW_Outside_map 12 match address Gat crypto map FW_Outside_map 12 set peer x.x.x.212 crypto map FW_Outside_map 12 set transform-set SECURE crypto map FW_Outside_map 13 match address Ken crypto map FW_Outside_map 13 set peer x.x.x.230 crypto map FW_Outside_map 13 set transform-set SECURE crypto map FW_Outside_map 14 match address She crypto map FW_Outside_map 14 set peer x.x.x.24 crypto map FW_Outside_map 14 set transform-set SECURE crypto map FW_Outside_map 15 match address North-Office crypto map FW_Outside_map 15 set peer x.x.x.94 crypto map FW_Outside_map 15 set transform-set SECURE crypto map FW_Outside_map 16 match address outside_cryptomap_16 crypto map FW_Outside_map 16 set peer x.x.x.134 crypto map FW_Outside_map 16 set transform-set SECURE crypto map FW_Outside_map 16 set security-association lifetime seconds crypto map FW_Outside_map 17 match address Lit crypto map FW_Outside_map 17 set peer x.x.x.110 crypto map FW_Outside_map 17 set transform-set SECURE crypto map FW_Outside_map 18 match address Mid crypto map FW_Outside_map 18 set peer 78.x.x.110 crypto map FW_Outside_map 18 set transform-set SECURE crypto map FW_Outside_map 19 match address Sp crypto map FW_Outside_map 19 set peer x.x.x.47 crypto map FW_Outside_map 19 set transform-set SECURE crypto map FW_Outside_map 20 match address Tor crypto map FW_Outside_map 20 set peer x.x.x.184 crypto map FW_Outside_map 20 set transform-set SECURE crypto map FW_Outside_map 21 match address Tr crypto map FW_Outside_map 21 set peer x.x.x.75 crypto map FW_Outside_map 21 set transform-set SECURE crypto map FW_Outside_map 22 match address Yo crypto map FW_Outside_map 22 set peer x.x.x.40 crypto map FW_Outside_map 22 set transform-set SECURE crypto map FW_Outside_map 23 match address Tra crypto map FW_Outside_map 23 set peer x.x.x.145 crypto map FW_Outside_map 23 set transform-set SECURE crypto map FW_Outside_map 24 match address outside_cryptomap_24 crypto map FW_Outside_map 24 set peer x.x.x.46 crypto map FW_Outside_map 24 set transform-set SECURE crypto map FW_Outside_map 24 set security-association lifetime seconds crypto map FW_Outside_map 25 match address Nor crypto map FW_Outside_map 25 set peer x.x.x.70 crypto map FW_Outside_map 25 set transform-set SECURE crypto map FW_Outside_map 26 match address Ilk crypto map FW_Outside_map 26 set peer x.x.x.65 crypto map FW_Outside_map 26 set transform-set SECURE crypto map FW_Outside_map 27 match address Nor crypto map FW_Outside_map 27 set peer x.x.x.240 crypto map FW_Outside_map 27 set transform-set SECURE crypto map FW_Outside_map 28 match address ST crypto map FW_Outside_map 28 set peer x.x.x.163 crypto map FW_Outside_map 28 set transform-set SECURE crypto map FW_Outside_map 28 set security-association lifetime seconds crypto map FW_Outside_map 28 set security-association lifetime kilobytes crypto map FW_Outside_map 29 match address Lei crypto map FW_Outside_map 29 set peer x.x.x.4 crypto map FW_Outside_map 29 set transform-set SECURE crypto map FW_Outside_map 30 match address outside_cryptomap_30 crypto map FW_Outside_map 30 set peer x.x.x.34 crypto map FW_Outside_map 30 set transform-set SECURE crypto map FW_Outside_map 31 match address outside_31_cryptomap crypto map FW_Outside_map 31 set pfs crypto map FW_Outside_map 31 set peer Cisco-admin-Peer crypto map FW_Outside_map 31 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 32 match address outside_32_cryptomap crypto map FW_Outside_map 32 set pfs crypto map FW_Outside_map 32 set peer HQ-SDSL-Peer crypto map FW_Outside_map 32 set transform-set ESP-AES-256-SHA crypto map FW_Outside_map 34 match address outside_cryptomap_34 crypto map FW_Outside_map 34 set peer x.x.x.246 crypto map FW_Outside_map 34 set transform-set ESP-AES-128-SHA ESP-AES-192-SHA ESP-AES-256-SHA crypto map FW_Outside_map 65535 ipsec-isakmp dynamic dynmap crypto map FW_Outside_map interface outside crypto map FW_outside_map 31 set peer x.x.x.45 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 9 webvpn enable outside svc enable group-policy ASA-LAN-VPN internal group-policy ASA_LAN-VPN attributes wins-server value 192.168.x.1 192.168.x.2 dns-server value 192.168.x.1 192.168.x.2 vpn-tunnel-protocol IPSec svc split-tunnel-policy tunnelspecified split-tunnel-network-list value Split-Tunnel-ACL default-domain value MYdomain username xxxxxxxxxx password privilege 15 tunnel-group DefaultRAGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group DefaultWEBVPNGroup ipsec-attributes isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.121 type ipsec-l2l tunnel-group x.x.x..121 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.202 type ipsec-l2l tunnel-group x.x.x.202 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.113 type ipsec-l2l tunnel-group x.x.x.113 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.205 type ipsec-l2l tunnel-group x.x.x.205 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.204 type ipsec-l2l tunnel-group x.x.x.204 ipsec-attributes pre-shared-key * isakmp keepalive threshold 30 retry 2 tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.215 type ipsec-l2l tunnel-group x.x.x.215 ipsec-attributes pre-shared-key * tunnel-group x.x.x.247 type ipsec-l2l tunnel-group x.x.x.247 ipsec-attributes pre-shared-key * tunnel-group x.x.x.170 type ipsec-l2l tunnel-group x.x.x.170 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..8 type ipsec-l2l tunnel-group x.x.x.8 ipsec-attributes pre-shared-key * tunnel-group x.x.x.212 type ipsec-l2l tunnel-group x.x.x.212 ipsec-attributes pre-shared-key * tunnel-group x.x.x.230 type ipsec-l2l tunnel-group x.x.x.230 ipsec-attributes pre-shared-key * tunnel-group x.x.x.24 type ipsec-l2l tunnel-group x.x.x.24 ipsec-attributes pre-shared-key * tunnel-group x.x.x.46 type ipsec-l2l tunnel-group x.x.x.46 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.4 type ipsec-l2l tunnel-group x.x.x.4 ipsec-attributes pre-shared-key * tunnel-group x.x.x.110 type ipsec-l2l tunnel-group x.x.x.110 ipsec-attributes pre-shared-key * tunnel-group 78.x.x.110 type ipsec-l2l tunnel-group 78.x.x.110 ipsec-attributes pre-shared-key * tunnel-group x.x.x.47 type ipsec-l2l tunnel-group x.x.x.47 ipsec-attributes pre-shared-key * tunnel-group x.x.x.34 type ipsec-l2l tunnel-group x.x.x.34 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x..129 type ipsec-l2l tunnel-group x.x.x.129 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.94 type ipsec-l2l tunnel-group x.x.x.94 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.40 type ipsec-l2l tunnel-group x.x.x.40 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.65 type ipsec-l2l tunnel-group x.x.x.65 ipsec-attributes pre-shared-key * tunnel-group x.x.x.70 type ipsec-l2l tunnel-group x.x.x.70 ipsec-attributes pre-shared-key * tunnel-group x.x.x.134 type ipsec-l2l tunnel-group x.x.x.134 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.163 type ipsec-l2l tunnel-group x.x.x.163 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x.2 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group ASA-LAN-VPN type remote-access tunnel-group ASA-LAN-VPN general-attributes address-pool RAS-VPN authentication-server-group vpn authentication-server-group (outside) vpn default-group-policy ASA-LAN-VPN tunnel-group ASA-LAN-VPN ipsec-attributes pre-shared-key * tunnel-group x.x.x.184 type ipsec-l2l tunnel-group x.x.x.184 ipsec-attributes pre-shared-key * tunnel-group x.x.x.145 type ipsec-l2l tunnel-group x.x.x.145 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.75 type ipsec-l2l tunnel-group x.x.x.75 ipsec-attributes pre-shared-key * tunnel-group x.x.x.246 type ipsec-l2l tunnel-group x.x.x.246 ipsec-attributes pre-shared-key * isakmp keepalive disable tunnel-group x.x.x.2 type ipsec-l2l tunnel-group x.x.x..2 ipsec-attributes pre-shared-key * tunnel-group x.x.x.98 type ipsec-l2l tunnel-group x.x.x.98 ipsec-attributes pre-shared-key * ! ! ! policy-map global_policy description Netflow class class-default flow-export event-type all destination MS-ISA-Server policy-map type inspect dns migrated_dns_map_1 parameters message-length maximum 512 Anyone have a clue because Im on the verge of going postal.....

    Read the article

  • WMI Remote connection objsWbemLocator.ConnectServer

    - by Sam
    I have an issue when connecting to remote machines using the following: Set objWMIService = objSWbemLocator.ConnectServer _ (sIP, "root\CIMV2", strUser, strPassword, "MS_409", "ntlmdomain:" + sDomain, 128) the problem is that some machines are not timing out and the process hangs. Is there a way to cancel the connect and continue with the next ip? I'm using vbscript. Thanks, Sam

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13  | Next Page >