Search Results

Search found 74454 results on 2979 pages for 'hardware problem'.

Page 80/2979 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Windows Mobile 7 corporate device...

  - by Toymaker

  Does anyone know of a Windows Mobile 7 device aimed at business use? I’m looking for something with bar code scanning capability. Psion, hand held, and honeywell only offer 6.5 at the moment. Granted, Windows Mobile 7 just barely came out and these sorts of devices usually lag a bit behind consumer toys...but hopefully someone can help.

  Read the article

• Upgrade no raid server to raid

  - by AZee

  I have just learned that our PDC has a single drive with 2 partitions. I also know that this drive has bad blocks as recorded in the event log. What I would like to do is to convert this to a RAID solution with a nice balance between economy and performance. I will admit that I have only configured servers with RAID from scratch, and have no experience upgrading an existing system into a RAID system. In fact, I'm not sure it is even possible. Since this is the PDC for 350+ workstations downtime is important. I'd like to hear from other System Administators how they would tackle this and their recommendations for all devices. At this time it seems to me that I can replace the existing drive and then restore from backup or install a controller, drives, configure the RAID an basically start from scratch. Thank you for taking your time. ~AZee

  Read the article

• Computer only booting after POWER ON/OFF 10 times or more?

  - by Jan Gressmann

  Hi fellow geeks, recently my computer started to behave like an old car and won't start up anymore unless I flip the power switch repeatedly. What happens when I power it on: CPU fans spins briefly and very slowly, then it stops Same with GPU fan No BIOS beeps or HDD activity Screen stays black After turning it on and off for like 10 times, it'll eventually boot like normal and run smooth without any problems what-so-ever. But I'm worried it might eventually die completely. Anyone know the most common cause of this? Maybe I should just leave the computer powered on? :)

  Read the article

• Is the cooling fan on a 2004 graphics card really necessary?

  - by Andrew

  I have an old GeForce 6600 card in my computer, circa 2004. Recently the fan has started playing up and making loud irritating noises. I've tried oiling it with no luck. This is the second fan I've put on the card, the stock one broke ages ago. Is a card this old really likely to need a cooling fan or can I remove it altogether? It has a decent heatsink on the chip but there's not a lot of airflow in that part of the box. Edit: I should add that I seem to remember most mid range graphics cards at the time I bought that didn't have fans (pretty sure they had heatsinks only), which is why I'm wondering.

  Read the article

• Can I create a virtual network interface to connect to a real network device?

  - by michelemarcon

  I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• Is there a peripheral that lets my computer monitor the connectivity of pairs of wires?

  - by raldi

  I've got a bunch of physical switches and circuits that act like switches (they're either connected to ground or they're just an open wire). Is there some sort of thing I can plug into my computer (ideally, via USB) that has a bunch of screw terminals, and I can attach wires to the screws and have the computer keep track of which circuits are closed and which are open? Bonus points if the device also lets the computer open and close switches, too. I don't even know what to google for.

  Read the article

• Which components are most susceptible to kinetic damage (fall)

  - by ULTRA_POROV

  I guess the most obvious answer would be a hard disk, are there any other components that are very susceptible to this kind of damage?

  Read the article

• Is it normal for a SAS drive to have a few bad blocks, or should I replace my drive ASAP?

  - by Nate

  I have a drive—part of a RAID 1 mirror—that has two bad blocks. Adaptec Storage Manger e-mailed me when it detected the blocks. It shows 4 medium errors for that drive, but state is still “optimal”. This is my first time using Adaptec RAID controllers. I don’t know if an occasional bad block is normal, or if I should immediately replace that drive. Update: The drive failed later the same day! The disk subsystem is: Adaptec 6405 with ZMM (2) Seagate near-line SAS drives (ST31000424SS) The other drive hasn’t reported any bad blocks yet. I am running a consistency check.

  Read the article

• Is A.C. necessary for Desktop PC or Server, if i live in too Hot region?

  - by metal gear solid

  Is A.C. necessary for Desktop PC or Server, if i live in too Hot region? where summer temp. is 48 centigrade.

  Read the article

• Difference between IDE and SATA DVD writers

  - by Mehper C. Palavuzlar

  What is the difference between IDE and SATA type DVD writers? My motherboard supports both. Which one do you recommend?

  Read the article

• what's POST code 18 / can I run an ASRock P55 Pro + Core i3 530?

  - by Michael Borgwardt

  When I switch my newly built PC on, the fans start up, but I get nothing on the monitor, and the POST display on the motherboard runs quickly through various codes and then stops at code 18, which does not appear in the manual (the list there seems identical to this one). This lasts about 10 seconds, after which the machine shuts down. After a pause (also about 10 seconds) it starts up again, and this repeats until I cut the power. Interestingly, when I push the reset button, it stops at POST code 16 (which is also not listed in the manual). Does anyone have information about the meaning of those codes? Motherboard: ASRock P55 Pro CPU: Intel Core i3 530 Graphics Card: Sapphire HHD 5750 Does anyone have experience with that Motherboard/CPU combination? It says on the packaging and in the manual that it's only compatible with Core i5 and i7 (no mention of i3), but on the maker's product page, the i3 is listed as compatible as well.

  Read the article

• Scanner Dayly Duty Cycle

  - by Juanp

  I'm comfused with the concept of 'Daily Duty Cycle'. For example if I have a scanner that the spec is: PPM (pages per minute): 90 and DDC (Daily Duty Cycle): 800. and I am interested in scanning ONLY 10hours continuously, what would it be the best choice: 90 * 60 * 10 = 54.000 or (800 / 24) * 10 = 333 It is very different results. what would it be the best option?

  Read the article

• Where to find a usb dongle with both copy protection and storage?

  - by martjno

  We are currently protecting our software with a USB dongle, but we would like also to store the application itself on it. I'm sure something like this exists, but we haven't be able to find it.

  Read the article

• Is it possible to have a pc with all components passively cooled (no fans)

  - by ULTRA_POROV

  Not a top performance pc but not a low end pc either. I guess you can get a passively cooled video card and a ssd drive, but what about the cpu and the power supply?

  Read the article

• How cpu writes data to dynamic RAM

  - by Krit

  Hello, I would like to know what kind of electrical signals does a cpu send to a dynamic RAM when it wants to write one bit (a 1 or 0). Is it simply that cpu sends just a single electric pulse, and if that electric pulse's voltage is higher than a certain level, it charges the capacitor to a voltage level that is "1" and if it is at a lower voltage band, it charges capacitor to level that it is "0"?

  Read the article

• my computer makes vibrating sounds

  - by Nrew

  I don't know why but every morning when I turn on the computer, it makes a vibrating sound. Like its case is attached to a vibrator. But when I turn it off and turn on again using the power button(still at os choices) the sound is gone. Why is my computer creating the sound?

  Read the article

• Windows Server 2008 R2 Maximum Processor Limit Confusion

  - by Stevoni

  As I was looking through the Windows Server 2008 R2 specifications, I saw that the maximum supported processors is 64 sockets for Datacenter addition. This puts the maximum number or cores at 256 (if all sockets are quad cores), which I think it's just silly, but whatever. And now the questions: How does one set something like that up? (Obviously not for me, but humor me) Are there multiple dual socket motherboards running in a giant case with a ton of memory? How does the OS see all of the CPUs if they're on different boards? What would be a real world example of a need to have 64 sockets attached to one operating system vs 32 2 socket servers?

  Read the article

• Can two ATI 3870X2 run together in Crossfire?

  - by Shiki

  The question is easy and simple. Will these run in crossfire or not due to the X2 (dual GPU). Thanks in advance.

  Read the article

• Shopping for a very compact and powerful workstation [closed]

  - by qdot

  I'm on the market for something small, size of an Mac Mini, could be heavier, that packs a lot of compute power - goal is to have a fast, known development machine at customer's site, but still easier to fly with than desktop-replacement laptops. If Mac Mini came with a quad-core i7, it would be my likely choice. Any other manufacturers to look at? Or perhaps a Mini can be upgraded beyond official specs?

  Read the article

• Shuttle FB51 mobo does not boot with external USB drive attached [closed]

  - by user127236

  I am repurposing an old Alienware desktop as a home media server. The PC is based on the Shuttle FB51 motherboard. The BIOS is a Phoenix Version 6.00 PG, release date 12/16/2002. I have loaded Ubuntu 12.04 LTS on the internal hard drive. I am using a Western Digital WD Elements 1.5 TB USB 2.0 Desktop External Hard Drive for media storage. When the external drive is plugged in and the PC is powered on, it freezes very early in the BIOS self-test, even before it begins the memory test. If I unplug the drive, the self-test proceeds without further problems. I can plug the USB drive back in when the self-test is complete, and Ubuntu will boot and find the external drive normally. I've tried several changes to the BIOS setup without finding a cure for the boot issue. Any assistance gratefully accepted. JGB

  Read the article

• How long until the chirping stops or what can I do to make it stop?

  - by MadBurn

  I know computers, I have been fixing them and building them for over a decade... but I don't know the exact electronics of them. My personal desktop PC is making an irregular, but constant, extremely high pitched chirping noise. I know this could be my hard drive, but I've heard that noise before and I believe this is a capacitor or part of the electronics. This noise is right at the edge of my hearing and I can feel it more than I can hear it. After a while, it starts to give me a headache and makes me physically sick. How long will this last? Is there anything I can do to fix it (short of replacing the entire motherboard)?

  Read the article

• Installed RAM : 4 GB but 2.96GB Usable......why?

  - by metal gear solid

  Installed RAM : 4 GB but 2.96GB Usable......why? I installed 2 x 2 GB DDR2 800 MHz. My Windows is Windows 7 Ultimate 32 bit. Is my ram Faulty?

  Read the article

• USB port causing device problems after new motherboard upgrade

  - by enbuyukfener

  I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

  Read the article

• Configuring a monitor's contrast/brightess/colours/etc

  - by DMA57361

  I have recently bought myself a new monitor, now I'd had my previous screen well over 5 years now so I'm looking at this one thinking the picture doesn't quite look right (not bad, just different). Rather than just wait until I'm used to the new picture I'd rather get it fine tuned, then get used to it - so I can reap the maximum benefit. So, can you please suggest reliable ways of configuring an LCD monitor's brightness/contrast/colour/etc to provide the optimum possibly quality image?

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >