Search Results

Search found 2799 results on 112 pages for 'hp ux'.

Page 80/112 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• VMware Virtualisation - Convert 64bit Windows Server to 32bit VM?

  - by dannymcc

  I have just started playing around with Vmware sphere and have the hypervisor OS installed on a spare HP ProLiant DL360 G4. I have created a test virtual machine running Ubuntu which has worked well. As a test project I wanted to convert a powered on server running Windows Server 2008 64bit into a virtual machine. As soon as I ran the Vmware Go software to start the conversion it became apparent that I cannot run 64bit guest OS's on that particular server. So, is there a way of migrating 64bit to 32bit during the conversion?

  Read the article

• Microsoft Office 2007

  - by nardone25

  Hello everyone in serverfault. I am having a big problem at my job. I will let everyone know what I am using. I have two ibm x3690 servers with vmware esxi on both. Our product server has 8 vm on there. I have two lefthand san from HP. I have a watchgurd firewall. Our other site. I have one server over there ibm x3b90 sever. with one vm on there. I have a cisco 1700 router. and another watchgurd firewall. I have a vpn tunnel to my watchgurd firewall, to my cisco router. Site one works great. site two is having problems saving word documents and having problems printing in publisher 2007. Can someone please help?

  Read the article

• Enabling 8021q on a nic

  - by Chris Phillips

  Hi, I'm trying to get a vlan interface on a bonded nic (Centos 5.5) and whilst the interface has been very happily created with vconfig I'm seeing no traffic on it at all. Running tcpdump and tshark on the underlying eth0 I see no sign at all of vlan tags in the traffic, and I'm wondering if there's somethign I'm missing on the server side as the network dept say they are sending me the tagged data. I've got the 8021q module loaded, however under lsmod it shows it's only being used by the cxgb3 module, for an unused onboard iSCSI card, whereas my nics (on an HP DL380 G7) are driven by bnx2 and e1000e modules. Should these modules be listing 8021q as used module? should I have something conrete in /etc/modprobe.conf? Thanks Chris

  Read the article

• How to make a pxe bootable 10MegaByte or larger dos image?

  - by rjt

  Would like to make a "massive" DOS floppy disk image, say 10MegaBytes or more containing all the firmware updates i need for any system, harddrive, BIOS. i do not need the DOS image to be networkable as everything will be on the PXE booted image, but networking would be nice. Since ZipDisks were attached to the floppy disk controller and were over 100MegaBytes, this should be possible. i tried a long time ago to do this and spent too much time on it only to have it fail to boot. So if someone has reliable instructions on how to create such a nightmarish beast and edit it, please let me know. One image that can used for PXE and copied to a USB stick would be a plus. Too bad manufacturers don't supply a single bootable Linux ISO containing all their firmware updates, that would be easy to boot over-the-lan and have networking. HP servers do this and it is awesome.

  Read the article

• External Display connected to Macbook pro won't sleep

  - by Moiz

  I have Macbook Pro with OSX 10.6.8. It is connected to external display (HP 2311x) using Thunderbolt to HDMI cable. My Macbook display goes to sleep after every 15 minutes of inactivity but the external display won't go to sleep. It does try to go to sleep but wake up immediately. It does that in never ending loop. I have to manually turn off the external display. Is there some settings I need to change to make external display sleep when Macbook display goes to sleep? Any suggestions? Thanks in advance!!

  Read the article

• Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

  - by AlexOdin

  What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

  Read the article

• Multiple VLAN on one switch port

  - by Macropus

  I have a HP ProCurve 1810G-8 which I currently use as a normal switch between 3 servers and a firewall. 2 of the servers are ESXi hosts, and one is a Nexentastor box with 2 iSCSI target LUNs. As the iSCSI traffic is on the same LAN as all other traffic, I would like to switch this to use a SAN for iSCSI traffic and the LAN for all other traffic. The Nexentastor box only has 2 NICs, and as such, with a physical arrangement, I presume that one must be plugged into the SAN VLAN and one on the LAN VLAN ports of the switch. Is there a way to have multiple VLANs over the same port? e.g. the Nexentsator box has 2 NICs, both plugged into the switch, both ports with access to both of the VLANs?

  Read the article

• My Windows 8 computer does not come out of Standby

  - by Jikag

  My computer will not come out out of standby. It has had this issue ever since I bought it ~4 years ago. When I purchased it, It came with Vista, I have since upgraded it to 7 and now 8 Pro, each time hoping that it would fix the problem, each time finding that it did not. My computer is an HP Pavilion Model #: m9500y. The computer goes into standby, but does not come out of it properly. If Hybrid sleep in on, it does not respond at all. If Hybrid sleep is off, It comes out and I can see the desktop for a bit, but then the screen goes black again and I have to reboot. I have tried Running a sfc, and a chkdsk in case it's a corrupted file, but it hasn't helped. This isn't too serious an issue because I can just shutdown my computer and turn it on the old fashioned way, but it is annoying and I would appreciate some advice going forward as I'm currently stumped.

  Read the article

• RHEL 5.1 loses changes to /etc/hosts above lines for `localhost`

  - by warren

  Is there a known fix (other than upgrading from 5.1) to fix /etc/hosts from being replaced on reboot? I discovered this behavior when running HP's Server Automation tools. HPSA sets-up a variety of local aliases for itself to use for different components to communicate wit each other. However, after reboot, the hosts files is reverted to a quasi-plain-vanilla version: all lines above the entry for localhost are removed. Manually re-adding those needed lines below the entries for localhost works, but is non-ideal. Is there a fix for this behavior? I do realize that RHEL 5u1 is not officially supported for HPSA 7.8, but the hosts file resetting is not good for a variety of other reasons, too.

  Read the article

• Software RAID 10 on Linux

  - by vpetersson

  For a long time, I've been thinking about switching to RAID 10 on a few servers. Now that Ubuntu 10.04 LTS is live, it's time for an upgrade. The servers I'm using are HP Proliant ML115 (very good value). It has four internal 3.5" slots. I'm currently using one drive for the system and a RAID5 array (software) for the remaining three disks. The problem is that this creates a single-point-of-failure on the boot drive. Hence I'd like to switch to a RAID10 array, as it would give me both better I/O performance and more reliability. The problem is only that good controller cards that supports RAID10 (such as 3Ware) cost almost as much as the server itself. Moreover software-RAID10 does not seem to work very well with Grub. What is your advice? Should I just keep running RAID5? Have anyone been able to successfully install a software RAID10 without boot issues?

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• Which is better for running Ubuntu and other Linux OSes, Chromebook or Windows, why? [on hold]

  - by Serge

  I'm learning programming and I would like to switch to a Linux OS, perhaps Ubuntu, to continue this, but the current machine is generally getting pretty old and slow and Windows is the least favorite option for production, and I can manage getting something new right around the price range of the nicest Chromebook on the market right now. However, I have compared specs of HP Chromebook 14 with those of regular PC laptops that roughly cost the same, and the latter consistently have approximately the same and sometimes higher (like the processor speed) specs. Yet usage of Chromebooks for this purpose is pretty widespread nowadays. Is this because they were initially built for a Linux OS - and is it really THAT crucial - or are there other major factors at play here?

  Read the article

• Windows 8 slow after refreshing and rebooting

  - by Dan Drews

  First, I apologize if this is in the wrong place. I use S/O a lot but not the other sites much. I have an HP Split X2 that has been very choppy as of late (takes several seconds to respond to any form of input), so I went ahead and did a system refresh. After the refresh everything ran very fast as it should, then when I went to download my old apps I needed to reboot. After rebooting, it went back to the choppiness. Does anybody have any thoughts on what this could be?

  Read the article

• Good Linux Distro for Disconnected Netbook

  - by MrWizard54

  I'm deployed to Afghanistan with the Army and I have a friend who's netbook had his hard drive take a dump on him. He ordered a new hard drive and I was able to download and burn a copy of Ubuntu to disk from work. However the default install doesn't support most of the media that he wants to watch (AVI files, probably some DIVX video) without installing extra packages. We don't have internet in the tent and really don't have a vaiable option for downloading additional packages through the package manager anywhere here. The computer is a small HP netbook. All my friend wants is to watch ripped movies. Does anyone know of a good way to do either of the following: Download packages seperately and install them via CD A distro that is going to come preloaded with all of the packages and needed to watch just about any type of video file you can think of? Thanks in advance, Andy

  Read the article

• Can I use a display driver from Windows 8 in Windows 7?

  - by adam0101

  My latest display driver doesn't support WDDM 1.0, and I need it to be at least version 1.1. I've been attempting to get the Windows Phone 7 SDK working on my HP Pavillion dv9000, but the phone emulator requires 1.1 or higher. My drivers are as up-to-date as they can get. I even tried a modded driver found here, but no go. Then, while evaluating Windows 8 Developer Preview on a different partition I noticed that dxdiag.exe showed it was using WDDM 1.2. I tried installing Windows Phone 7 SDK on Windows 8, but I get an "Internal Error" popup and "Connection failed because of invalid command-line arguments" in the error window in Visual Studio. I'm guessing because Windows Phone 7 SDK isn't supported on Windows 8 yet. So my question is this: Can I get Windows 7 to use the display driver Windows 8 is using to get WDDM 1.2 on Windows 7 and how would I go about doing it?

  Read the article

• How have you saved green by going green?

  - by Bob

  For the purpose of this question, I am interested in server/datacenter related hardware. Have you had any measureable amount of ROI by swapping existing hardware to more "green" or energy efficient hardware? For example, VMWare says you can reduce energy consumption by up to 80% by using virtualization. I have also heard of a cooling solution from HP which is suppose to reduce a small amount of engery usage (<25% I think). Google has also done something by integrating a UPS into their power supplies to reduce energy consumption. Any real world experiences would be great, but if you have any details on initial cost, savings and pay off time about what changes were make that would fantastic. I am not only interested in virtualization, I am interested in anything.

  Read the article

• Scripts on UNC paths take very long to run

  - by Álvaro G. Vicario

  I have several scripts in UNC paths (from Windows batch files to PHP scripts). No matter how I run them (double click on explorer, my editor's run command menu or Windows command prompt) they take really long to start running (like 14 seconds). Once they get started they run normally. This doesn't happen if I run them from mapped drives. I'm using Windows XP Professional SP3 inside an Active Directory domain and files are hosted in a Windows Server box (not sure about the version, it's an HP dedicated file server with bundled OS). Why does it happen? Is there a way to speed up things while using UNC paths?

  Read the article

• How to force a resolution in linux?

  - by hi

  I have a HP LP3065 that requires a dual link dvi cable to go up to 2560x1600 resolution. However, I do not have that cable, but I want to use 1920x1200 resolution. However, my nVidia Display Settings (also system display settings) will only go up to 1280x1024, which looks horribly pixelated on the 30". How do I force the 1920x1200 resolution? I tried adding the mode into my xorg.conf file, but it still would not take it. I know my vid card can do 1920x1200 since it works on the 24" monitor with the same dvi cable. Here are my specs: Fedora 12 Nvidia Quadro NVS 420 Intel Xenon E5530 cpu 6gig memory Thanks

  Read the article

• Configuring Server with no monitor

  - by Scandalist

  Sitting in front of me is an HP DL 380 Generation 4 with no monitor. I'd like to install an OS on the thing but for reasons obvious, I can't. I got excited when I found the ILO port on the back but unless you have a subscription it has limited functionality. I was thinking maybe there was some software out there that booted into some kind of remote access server? When I tested it with a monitor (A friends) I set the BIOS to boot from USB so anything I can load onto a stick should boot. Ideas? Hacks?

  Read the article

• What all laptops can replace a compaq presario v2000's monitor ?

  - by Nishant

  I am planning to buy laptop for parts/repair from Ebay to replace by broken LCD of Compaq presario v2000 . I know the monitor is 14" WXGA and LTNW140-l01 model made by samsung . I have removed the LCD panel and I can see 2 cables , one power and other video signal Can I buy a 14.1" LAPTOP and fit to this ? 14.1 WXGA seems very common . Please can any one tell which all laptops can replace this monitor ? I know HP DV 1000 does ? Any advices would be great .

  Read the article

• How can I set my wireless router to run on a time schedule?

  - by Joshua Robison

  I have a Buffalo AirStation WZR-HP-G301NH I am able to access it's settings via 192.168.11.1 I'm connecting wirelessly with toshiba i686 laptop on Linux Mint Debian with service pack 3 and i686 dual core kernel This is just my home network but I know that there must be a way for large industries to shut their networks down or lock out their network access temporarily based on a time schedule, automatically. Like mon - fri the network provides access from 8am to 10pm and then automatically shuts down. I want this to affect all the computers accessing this netowork... basically all my families computers so that the internet just automatically shuts down at bedtime. I am running Linux Mint Debian and so maybe I need to make a cron job or something but does anyone know how big industries implement this and how I can do it privately? TIA

  Read the article

• Laptop Touch-pad stops working after reattaching parts

  - by kb67

  I was trying to replace my LCD screen for the first time, and it was a very hard process to do. I had to unscrew everything from the bottom of the laptop (Ram, HD, etc) and detach everything that was under the keyboard. After reattaching the LCD, putting everything back together, the touch-pad has stop working. Everything works except for that. Anybody know why it stopped working? I have an HP G61-429WM Laptop. Sorry if this was the wrong place to ask.

  Read the article

• Why is windows 7 marking all my extra RAM as "hardware reserved"?

  - by pinkmuppet

  I have a new HP Z800 Workstation, running Windows 7 Enterprise 64 bit. The machine has 4GB of RAM -- windows reported 1.99GB available, 2GB was "hardware reserved". I added another 2 GB and windows reports that there is 6GB of physical RAM, but now 4GB is "hardware reserved". The BIOS sees the full RAM amount as well. The video card is an nVida Quadro FX 580, so it shouldn't be using any shared memory at all. whats going on? Z800 Specs are here.

  Read the article

• Which driver for "ATI Mobility Radeon HD 3650" in a laptop?

  - by Lasse V. Karlsen

  We have some HP laptops here that comes equipped with a video card that identifies itself as "ATI Mobility Radeon HD 3650", like this one. However, which drivers do we choose? As far as we can tell, HD 3650 is desktop cards, or at least there are no drivers listed for that series with "Mobility" in their name. If I pick the following on the ATI Driver Download page: Graphics Windows Vista 32-bit Edition Mobility Radeon Then the dropdown for the card model contains X300, X600, X700, X800, X1300, X1400, X1600, X1800, 9600, 9700 and 9800 models, but no "HD" nor "36xx series". However, if I change to just "Radeon" for the last selection there, I can find a "Radeon HD 3600 Series" model in the list. Also, if I pick "Windows 7" as the operating system, I can find a "Mobility Radeon HD 3000 series" card, but no 3600. So, which one to pick? The main reason I ask is that they all seem to have some kind of problem installing, so neither seems to be the right one (they all crash with "Catalyst Install Manager has stopped working".)

  Read the article

• VMXNET3 nic loses the ability to update ARP table after N hours

  - by Peter

  I have a fedora 18 VM that stops updating the arp table on eth1 after running for a number of hours to days. There are other VMs on the same hypervisor that can access all of the same networks without issue. A tcpdump of the offending NIC shows only ARP broadcasts but no responses. None of the other VMs on the vDS see the ARP broadcasts from the offending NIC. The only way I can currently solve the problem is to reboot the VM and then everything works for a while. I've tried changing the port on the vDS and even flipping the network configurations after I lose eth1's ARP table, but the ARP problem follows eth1 but I can access the machines that were originally on eth1. If I statically add the arp entries for machines on the same subnet I have no problems with connectivity. The Hypervisor is an HP BL49X series with flex-10 network modules. Has anyone seen anything like this before?

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >