Search Results

Search found 13817 results on 553 pages for 'net4 full'.

Page 80/553 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Bonding: works only for download

  - by Crazy_Bash

  I would like to install bonding with 4 links with mode 4. but only "download/receiving" works with bondig. for transmitting the system chooses one link. ifconfig bond0 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 inet addr:ip Bcast:ip Mask:255.255.255.248 inet6 addr: fe80::92e2:baff:fe0f:76b4/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:239187413 errors:0 dropped:10944 overruns:0 frame:0 TX packets:536902370 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14688536197 (13.6 GiB) TX bytes:799521192901 (744.6 GiB) eth2 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:54969488 errors:0 dropped:0 overruns:0 frame:0 TX packets:2537 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3374778591 (3.1 GiB) TX bytes:314290 (306.9 KiB) eth3 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:64935805 errors:0 dropped:1 overruns:0 frame:0 TX packets:2532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3993499746 (3.7 GiB) TX bytes:313968 (306.6 KiB) eth4 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:57352105 errors:0 dropped:2 overruns:0 frame:0 TX packets:536894778 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3524236530 (3.2 GiB) TX bytes:799520265627 (744.6 GiB) eth5 Link encap:Ethernet HWaddr 90:E2:BA:0F:76:B4 UP BROADCAST RUNNING SLAVE MULTICAST MTU:1500 Metric:1 RX packets:61930025 errors:0 dropped:3 overruns:0 frame:0 TX packets:2540 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3796021948 (3.5 GiB) TX bytes:314274 (306.9 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5320 (5.1 KiB) TX bytes:5320 (5.1 KiB) those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no cat /proc/net/bonding/bond0 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: layer2 (0) MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 802.3ad info LACP rate: slow Aggregator selection policy (ad_select): stable Active Aggregator Info: Aggregator ID: 1 Number of ports: 4 Actor Key: 17 Partner Key: 11 Partner Mac Address: 00:24:51:12:63:00 Slave Interface: eth2 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b4 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth3 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b5 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth4 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b6 Aggregator ID: 1 Slave queue ID: 0 Slave Interface: eth5 MII Status: up Speed: 1000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: 90:e2:ba:0f:76:b7 Aggregator ID: 1 Slave queue ID: 0 /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 mode 6

  Read the article

• Allowing connections initiated from outside

  - by Mark S. Rasmussen

  I've got an old Juniper SSG5 running ScreenOS 5.4.0r6.0. Once a day, more or less, it'll start randomly dropping packets at a rate of ~5-10%. We currently solve this issue by simply rebooting the unit, after which it resumes working in perfect condition. As this error has started appearing randomly, without any configuration or hardware changes, I'm assuming I've got an aging unit about to fail. As such, I've got a replacement SSG5 running ScreenOS 6.0. I've dumped the config on the 5.4 and imported it into a clean 6.0, and it seems to gladly accept it, and all my configuration seems to be A-OK. However, upon connecting the new unit, all outside-initiated connections seem to be blocked. If I browse our external IP from the inside, everything works perfectly, and it's not just port 80, SSH, Crashplan - all of our policies route correctly. All normal networking, initiated from the inside, work perfectly as well. If on the other hand I browse our external IP from the outside, everything is blocked. Barring differences between ScreenOS 5.4 and 6.0, the config is identical. Is there a setting somewhere that defines whether outside/inside initiated connections are allowed? unset key protection enable set clock timezone 1 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set service "MyVOIP_UDP4569" protocol udp src-port 0-65535 dst-port 4569-4569 set service "MyVOIP_TCP22" protocol tcp src-port 0-65535 dst-port 22-22 set service "MyRDP" protocol tcp src-port 0-65535 dst-port 3389-3389 set service "MyRsync" protocol tcp src-port 0-65535 dst-port 873-873 set service "NZ_FTP" protocol tcp src-port 0-65535 dst-port 40000-41000 set service "NZ_FTP" + tcp src-port 0-65535 dst-port 21-21 set service "PPTP-VPN" protocol 47 src-port 2048-2048 dst-port 2048-2048 set service "PPTP-VPN" + tcp src-port 1024-65535 dst-port 1723-1723 set service "NZ_FMS_1935" protocol tcp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_1935" + udp src-port 0-65535 dst-port 1935-1935 set service "NZ_FMS_8080" protocol tcp src-port 0-65535 dst-port 8080-8080 set service "CrashPlan Server" protocol tcp src-port 0-65535 dst-port 4280-4280 set service "CrashPlan Console" protocol tcp src-port 0-65535 dst-port 4282-4282 unset alg sip enable set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "XXX" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set vip multi-port set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface ethernet0/0 phy full 100mb set interface ethernet0/3 phy full 100mb set interface ethernet0/4 phy full 100mb set interface ethernet0/5 phy full 100mb set interface ethernet0/6 phy full 100mb set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Null" set interface "bgroup0" zone "Trust" set interface "bgroup1" zone "Trust" set interface "bgroup2" zone "Trust" set interface bgroup2 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup1 port ethernet0/5 set interface bgroup1 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 215.173.182.18/29 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup1 ip 192.168.2.1/24 set interface bgroup1 nat set interface bgroup2 ip 192.168.3.1/24 set interface bgroup2 nat set interface ethernet0/0 gateway 215.173.182.17 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup1 ip manageable set interface bgroup2 ip manageable set interface bgroup0 manage mtrace unset interface bgroup1 manage ssh unset interface bgroup1 manage telnet unset interface bgroup1 manage snmp unset interface bgroup1 manage ssl unset interface bgroup1 manage web unset interface bgroup2 manage ssh unset interface bgroup2 manage telnet unset interface bgroup2 manage snmp unset interface bgroup2 manage ssl unset interface bgroup2 manage web set interface ethernet0/0 vip 215.173.182.19 2048 "PPTP-VPN" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4280 "CrashPlan Server" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.19 + 4282 "CrashPlan Console" 192.168.1.131 set interface ethernet0/0 vip 215.173.182.22 22 "MyVOIP_TCP22" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 4569 "MyVOIP_UDP4569" 192.168.2.127 set interface ethernet0/0 vip 215.173.182.22 + 3389 "MyRDP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 873 "MyRsync" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 80 "HTTP" 192.168.2.202 set interface ethernet0/0 vip 215.173.182.22 + 2048 "PPTP-VPN" 192.168.2.201 set interface ethernet0/0 vip 215.173.182.22 + 8080 "NZ_FMS_8080" 192.168.2.216 set interface ethernet0/0 vip 215.173.182.22 + 1935 "NZ_FMS_1935" 192.168.2.216 set interface bgroup0 dhcp server service set interface bgroup1 dhcp server service set interface bgroup2 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup1 dhcp server auto set interface bgroup2 dhcp server auto set interface bgroup0 dhcp server option domainname companyalan set interface bgroup0 dhcp server option dns1 192.168.1.131 set interface bgroup1 dhcp server option domainname companyblan set interface bgroup1 dhcp server option dns1 192.168.2.202 set interface bgroup2 dhcp server option dns1 8.8.8.8 set interface bgroup2 dhcp server option wins1 8.8.4.4 set interface bgroup0 dhcp server ip 192.168.1.2 to 192.168.1.116 set interface bgroup1 dhcp server ip 192.168.2.2 to 192.168.2.116 set interface bgroup2 dhcp server ip 192.168.3.2 to 192.168.3.126 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup1 dhcp server config next-server-ip unset interface bgroup2 dhcp server config next-server-ip set interface "ethernet0/0" mip 215.173.182.21 host 192.168.2.202 netmask 255.255.255.255 vr "trust-vr" set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set pki x509 dn name "[email protected]" set dns host dns1 0.0.0.0 set dns host dns2 0.0.0.0 set dns host dns3 0.0.0.0 set address "Trust" "192.168.1.0/24" 192.168.1.0 255.255.255.0 set address "Trust" "192.168.2.0/24" 192.168.2.0 255.255.255.0 set address "Trust" "192.168.3.0/24" 192.168.3.0 255.255.255.0 set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set vrouter "untrust-vr" exit set vrouter "trust-vr" exit set l2tp default ppp-auth chap set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "PPTP-VPN" permit traffic set policy id 2 exit set policy id 3 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "HTTP" permit log set policy id 3 set service "MyRDP" set service "MyRsync" set service "MyVOIP_TCP22" set service "MyVOIP_UDP4569" exit set policy id 6 from "Trust" to "Trust" "192.168.1.0/24" "192.168.2.0/24" "ANY" deny set policy id 6 exit set policy id 7 from "Trust" to "Trust" "192.168.2.0/24" "192.168.1.0/24" "ANY" deny set policy id 7 exit set policy id 8 from "Trust" to "Trust" "192.168.3.0/24" "192.168.1.0/24" "ANY" deny set policy id 8 exit set policy id 9 from "Trust" to "Trust" "192.168.3.0/24" "192.168.2.0/24" "ANY" deny set policy id 9 exit set policy id 10 from "Untrust" to "Trust" "Any" "MIP(215.173.182.21)" "NZ_FTP" permit set policy id 10 exit set policy id 11 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "PPTP-VPN" permit set policy id 11 exit set policy id 12 from "Untrust" to "Trust" "Any" "VIP(215.173.182.22)" "NZ_FMS_1935" permit set policy id 12 set service "NZ_FMS_8080" exit set policy id 13 from "Untrust" to "Trust" "Any" "VIP(215.173.182.19)" "CrashPlan Console" permit set policy id 13 set service "CrashPlan Server" exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit Note that I've previously posted a similar question (pertaining to the same device & replacement, but ultimately caused by a malfunctioning switch, and thus clouding the current issue): Outbound traffic being blocked for MIP/VIPped servers (Juniper SSG5)

  Read the article

• TFS 2010 Build Custom Activity for Merging Assemblies

  - by Jakob Ehn

  *** The sample build process template discussed in this post is available for download from here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/ILMerge.xaml ***   In my previous post I talked about library builds that we use to build and replicate dependencies between applications in TFS. This is typically used for common libraries and tools that several other application need to reference. When the libraries grow in size over time, so does the number of assemblies. So all solutions that uses the common library must reference all the necessary assemblies that they need, and if we for example do a refactoring and extract some code into a new assembly, all the clients must update their references to reflect these changes, otherwise it won’t compile. To improve on this, we use a tool from Microsoft Research called ILMerge (Download from here). It can be used to merge several assemblies into one assembly that contains all types. If you haven’t used this tool before, you should check it out. Previously I have implemented this in builds using a simple batch file that contains the full command, something like this: "%ProgramFiles(x86)%\microsoft\ilmerge\ilmerge.exe" /target:library /attr:ClassLibrary1.bl.dll /out:MyNewLibrary.dll ClassLibrary1.dll ClassLibrar2.dll ClassLibrary3.dll This merges 3 assemblies (ClassLibrary1, 2 and 3) into a new assembly called MyNewLibrary.dll. It will copy the attributes (file version, product version etc..) from ClassLibrary1.dll, using the /attr switch. For more info on ILMerge command line tool, see the above link. This approach works, but requires a little bit too much knowledge for the developers creating builds, therefor I have implemented a custom activity that wraps the use of ILMerge. This makes it much simpler to setup a new build definition and have the build automatically do the merging. The usage of the activity is then implemented as part of the Library Build process template mentioned in the previous post. For this article I have just created a simple build process template that only performs the ILMerge operation.   Below is the code for the custom activity. To make it compile, you need to reference the ILMerge.exe assembly. /// <summary> /// Activity for merging a list of assembies into one, using ILMerge /// </summary> public sealed class ILMergeActivity : BaseCodeActivity { /// <summary> /// A list of file paths to the assemblies that should be merged /// </summary> [RequiredArgument] public InArgument<IEnumerable<string>> InputAssemblies { get; set; } /// <summary> /// Full path to the generated assembly /// </summary> [RequiredArgument] public InArgument<string> OutputFile { get; set; } /// <summary> /// Which input assembly that the attibutes for the generated assembly should be copied from. /// Optional. If not specified, the first input assembly will be used /// </summary> public InArgument<string> AttributeFile { get; set; } /// <summary> /// Kind of assembly to generate, dll or exe /// </summary> public InArgument<TargetKindEnum> TargetKind { get; set; } // If your activity returns a value, derive from CodeActivity<TResult> // and return the value from the Execute method. protected override void Execute(CodeActivityContext context) { string message = InputAssemblies.Get(context).Aggregate("", (current, assembly) => current + (assembly + " ")); TrackMessage(context, "Merging " + message + " into " + OutputFile.Get(context)); ILMerge m = new ILMerge(); m.SetInputAssemblies(InputAssemblies.Get(context).ToArray()); m.TargetKind = TargetKind.Get(context) == TargetKindEnum.Dll ? ILMerge.Kind.Dll : ILMerge.Kind.Exe; m.OutputFile = OutputFile.Get(context); m.AttributeFile = !String.IsNullOrEmpty(AttributeFile.Get(context)) ? AttributeFile.Get(context) : InputAssemblies.Get(context).First(); m.SetTargetPlatform(RuntimeEnvironment.GetSystemVersion().Substring(0,2), RuntimeEnvironment.GetRuntimeDirectory()); m.Merge(); TrackMessage(context, "Generated " + m.OutputFile); } } [Browsable(true)] public enum TargetKindEnum { Dll, Exe } NB: The activity inherits from a BaseCodeActivity class which is an internal helper class which contains some methods and properties useful for moste custom activities. In this case, it uses the TrackeMessage method for writing to the build log. You either need to remove the TrackMessage method calls, or implement this yourself (which is not very hard… ) The custom activity has the following input arguments: InputAssemblies A list with the (full) paths to the assemblies to merge OutputFile The name of the resulting merged assembly AttributeFile Which assembly to use as the template for the attribute of the merged assembly. This argument is optional and if left blank, the first assembly in the input list is used TargetKind Decides what type of assembly to create, can be either a dll or an exe Of course, there are more switches to the ILMerge.exe, and these can be exposed as input arguments as well if you need it. To show how the custom activity can be used, I have attached a build process template (see link at the top of this post) that merges the output of the projects being built (CommonLibrary.dll and CommonLibrary2.dll) into a merged assembly (NewLibrary.dll). The build process template has the following custom process parameters:   The Assemblies To Merge argument is passed into a FindMatchingFiles activity to located all assemblies that are located in the BinariesDirectory folder after the compilation has been performed by Team Build. Here is the complete sequence of activities that performs the merge operation. It is located at the end of the Try, Compile, Test and Associate… sequence: It splits the AssembliesToMerge parameter and appends the full path (using the BinariesDirectory variable) and then enumerates the matching files using the FindMatchingFiles activity. When running the build, you can see that it merges two assemblies into a new one:     And the merged assembly (and associated pdb file) is copied to the drop location together with the rest of the assemblies:

  Read the article

• TFS 2010 SDK: Smart Merge - Programmatically Create your own Merge Tool

  - by Tarun Arora

  Technorati Tags: Team Foundation Server 2010,TFS SDK,TFS API,TFS Merge Programmatically,TFS Work Items Programmatically,TFS Administration Console,ALM   The information available in the Merge window in Team Foundation Server 2010 is very important in the decision making during the merging process. However, at present the merge window shows very limited information, more that often you are interested to know the work item, files modified, code reviewer notes, policies overridden, etc associated with the change set. Our friends at Microsoft are working hard to change the game again with vNext, but because at present the merge window is a model window you have to cancel the merge process and go back one after the other to check the additional information you need. If you can relate to what i am saying, you will enjoy this blog post! I will show you how to programmatically create your own merging window using the TFS 2010 API. A few screen shots of the WPF TFS 2010 API – Custom Merging Application that we will be creating programmatically, Excited??? Let’s start coding… 1. Get All Team Project Collections for the TFS Server You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetAllTeamProjectCollections() 2: { 3: TfsConfigurationServer configurationServer = 4: TfsConfigurationServerFactory. 5: GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 6: 7: CatalogNode catalogNode = configurationServer.CatalogNode; 8: return catalogNode.QueryChildren(new Guid[] 9: { CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: } 2. Get All Team Projects for the selected Team Project Collection You can read more on connecting to TFS programmatically on my blog post => How to connect to TFS Programmatically 1: public static ReadOnlyCollection<CatalogNode> GetTeamProjects(string instanceId) 2: { 3: ReadOnlyCollection<CatalogNode> teamProjects = null; 4: 5: TfsConfigurationServer configurationServer = 6: TfsConfigurationServerFactory.GetConfigurationServer(new Uri("http://xxx:8080/tfs/")); 7: 8: CatalogNode catalogNode = configurationServer.CatalogNode; 9: var teamProjectCollections = catalogNode.QueryChildren(new Guid[] {CatalogResourceTypes.ProjectCollection }, 10: false, CatalogQueryOptions.None); 11: 12: foreach (var teamProjectCollection in teamProjectCollections) 13: { 14: if (string.Compare(teamProjectCollection.Resource.Properties["InstanceId"], instanceId, true) == 0) 15: { 16: teamProjects = teamProjectCollection.QueryChildren(new Guid[] { CatalogResourceTypes.TeamProject }, false, 17: CatalogQueryOptions.None); 18: } 19: } 20: 21: return teamProjects; 22: } 3. Get All Branches with in a Team Project programmatically I will be passing the name of the Team Project for which i want to retrieve all the branches. When consuming the ‘Version Control Service’ you have the method QueryRootBranchObjects, you need to pass the recursion type => none, one, full. Full implies you are interested in all branches under that root branch. 1: public static List<BranchObject> GetParentBranch(string projectName) 2: { 3: var branches = new List<BranchObject>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<teamProjectName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var allBranches = versionControl.QueryRootBranchObjects(RecursionType.Full); 9: 10: foreach (var branchObject in allBranches) 11: { 12: if (branchObject.Properties.RootItem.Item.ToUpper().Contains(projectName.ToUpper())) 13: { 14: branches.Add(branchObject); 15: } 16: } 17: 18: return branches; 19: } 4. Get All Branches associated to the Parent Branch Programmatically Now that we have the parent branch, it is important to retrieve all child branches of that parent branch. Lets see how we can achieve this using the TFS API. 1: public static List<ItemIdentifier> GetChildBranch(string parentBranch) 2: { 3: var branches = new List<ItemIdentifier>(); 4: 5: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 6: var versionControl = tfs.GetService<VersionControlServer>(); 7: 8: var i = new ItemIdentifier(parentBranch); 9: var allBranches = 10: versionControl.QueryBranchObjects(i, RecursionType.None); 11: 12: foreach (var branchObject in allBranches) 13: { 14: foreach (var childBranche in branchObject.ChildBranches) 15: { 16: branches.Add(childBranche); 17: } 18: } 19: 20: return branches; 21: } 5. Get Merge candidates between two branches Programmatically Now that we have the parent and the child branch that we are interested to perform a merge between we will use the method ‘GetMergeCandidates’ in the namespace ‘Microsoft.TeamFoundation.VersionControl.Client’ => http://msdn.microsoft.com/en-us/library/bb138934(v=VS.100).aspx 1: public static MergeCandidate[] GetMergeCandidates(string fromBranch, string toBranch) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetMergeCandidates(fromBranch, toBranch, RecursionType.Full); 7: } 6. Get changeset details Programatically Now that we have the changeset id that we are interested in, we can get details of the changeset. The Changeset object contains the properties => http://msdn.microsoft.com/en-us/library/microsoft.teamfoundation.versioncontrol.client.changeset.aspx - Changes: Gets or sets an array of Change objects that comprise this changeset. - CheckinNote: Gets or sets the check-in note of the changeset. - Comment: Gets or sets the comment of the changeset. - PolicyOverride: Gets or sets the policy override information of this changeset. - WorkItems: Gets an array of work items that are associated with this changeset. 1: public static Changeset GetChangeSetDetails(int changeSetId) 2: { 3: var tfs = TfsTeamProjectCollectionFactory.GetTeamProjectCollection(new Uri("http://<ServerName>:8080/tfs/<CollectionName>")); 4: var versionControl = tfs.GetService<VersionControlServer>(); 5: 6: return versionControl.GetChangeset(changeSetId); 7: } 7. Possibilities In future posts i will try and extend this idea to explore further possibilities, but few features that i am sure will further help during the merge decision making process would be, - View changed files - Compare modified file with current/previous version - Merge Preview - Last Merge date Any other features that you can think of?

  Read the article

• European Interoperability Framework - a new beginning?

  - by trond-arne.undheim

  The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

  Read the article

• SQL SERVER – Windows File/Folder and Share Permissions – Notes from the Field #029

  - by Pinal Dave

  [Note from Pinal]: This is a 29th episode of Notes from the Field series. Security is the task which we should give it to the experts. If there is a small overlook or misstep, there are good chances that security of the organization is compromised. This is very true, but there are always devils’s advocates who believe everyone should know the security. As a DBA and Administrator, I often see people not taking interest in the Windows Security hiding behind the reason of not expert of Windows Server. We all often miss the important mission statement for the success of any organization – Teamwork. In this blog post Brian tells the story in very interesting lucid language. Read On! In this episode of the Notes from the Field series database expert Brian Kelley explains a very crucial issue DBAs and Developer faces on their production server. Linchpin People are database coaches and wellness experts for a data driven world. Read the experience of Brian in his own words. When I talk security among database professionals, I find that most have at least a working knowledge of how to apply security within a database. When I talk with DBAs in particular, I find that most have at least a working knowledge of security at the server level if we’re speaking of SQL Server. One area I see continually that is weak is in the area of Windows file/folder (NTFS) and share permissions. The typical response is, “I’m a database developer and the Windows system administrator is responsible for that.” That may very well be true – the system administrator may have the primary responsibility and accountability for file/folder and share security for the server. However, if you’re involved in the typical activities surrounding databases and moving data around, you should know these permissions, too. Otherwise, you could be setting yourself up where someone is able to get to data he or she shouldn’t, or you could be opening the door where human error puts bad data in your production system. File/Folder Permission Basics: I wrote about file/folder permissions a few years ago to give the basic permissions that are most often seen. Here’s what you must know as a minimum at the file/folder level: Read - Allows you to read the contents of the file or folder. Having read permissions allows you to copy the file or folder. Write  – Again, as the name implies, it allows you to write to the file or folder. This doesn’t include the ability to delete, however, nothing stops a person with this access from writing an empty file. Delete - Allows the file/folder to be deleted. If you overwrite files, you may need this permission. Modify - Allows read, write, and delete. Full Control - Same as modify + the ability to assign permissions. File/Folder permissions aggregate, unless there is a DENY (where it trumps, just like within SQL Server), meaning if a person is in one group that gives Read and antoher group that gives Write, that person has both Read and Write permissions. As you might expect me to say, always apply the Principle of Least Privilege. This likely means that any additional permission you might add does not need Full Control. Share Permission Basics: At the share level, here are the permissions. Read - Allows you to read the contents on the share. Change - Allows you to read, write, and delete contents on the share. Full control - Change + the ability to modify permissions. Like with file/folder permissions, these permissions aggregate, and DENY trumps. So What Access Does a Person / Process Have? Figuring out what someone or some process has depends on how the location is being accessed: Access comes through the share (\\ServerName\Share) – a combination of permissions is considered. Access is through a drive letter (C:\, E:\, S:\, etc.) – only the file/folder permissions are considered. The only complicated one here is access through the share. Here’s what Windows does: Figures out what the aggregated permissions are at the file/folder level. Figures out what the aggregated permissions are at the share level. Takes the most restrictive of the two sets of permissions. You can test this by granting Full Control over a folder (this is likely already in place for the Users local group) and then setting up a share. Give only Read access through the share, and that includes to Administrators (if you’re creating a share, likely you have membership in the Administrators group). Try to read a file through the share. Now try to modify it. The most restrictive permission is the Share level permissions. It’s set to only allow Read. Therefore, if you come through the share, it’s the most restrictive. Does This Knowledge Really Help Me? In my experience, it does. I’ve seen cases where sensitive files were accessible by every authenticated user through a share. Auditors, as you might expect, have a real problem with that. I’ve also seen cases where files to be imported as part of the nightly processing were overwritten by files intended from development. And I’ve seen cases where a process can’t get to the files it needs for a process because someone changed the permissions. If you know file/folder and share permissions, you can spot and correct these types of security flaws. Given that there are a lot of database professionals that don’t understand these permissions, if you know it, you set yourself apart. And if you’re able to help on critical processes, you begin to set yourself up as a linchpin (link to .pdf) for your organization. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Wiring up JavaScript handlers after a Partial Postback in ASP.NET

  - by Richard

  I am trying to use LinkButtons with the DefaultButton property of the ASP.NET Panel in an UpdatePanel. I have read and used the various other answers that are around describing the wiring up of the click event so that a full postback is not done instead of a partial postback. When the page loads, I wire up the .click function of the LinkButton so that the DefaultButton property of the ASP.NET panel will work. This all works fine, until you bring an UpdatePanel into the mix. With an UpdatePanel, if there is a partial postback, the script to wire up the .click function is not called in the partial postback, and hitting enter reverts to causing a full submit of the form rather than triggering the LinkButton. How can I cause javascript to be executed after a partial postback to re-wire up the .click function of the LinkButton? I have produced a sample page which shows the problem. There are two alerts showing 1) When the code to hook up the .click function is being called, and 2) When the .click function has been called (this only happens when you hit enter in the textbox after the event has been wired up). To test this code, type something in the textbox and hit Enter. The text will be copied to the label control, but "Wiring up Event Click" alert will not be shown. Add another letter, hit enter again, and you'll get a full postback without the text being copied to the label control (as the LinkButton wasn't called). Because that was a full postback, the Wiring Up Event Click event will be called again, and the form will work properly the next time again. This is being done with ASP.NET 3.5. Test Case Code: <%@ Page Language="C#" Inherits="System.Web.UI.Page" Theme="" EnableTheming="false" AutoEventWireup="true" %> <script runat="server"> void cmdComplete_Click(object sender, EventArgs e) { lblOutput.Text = "Complete Pressed: " + txtInput.Text; } void cmdFirstButton_Click(object sender, EventArgs e) { lblOutput.Text = "First Button Pressed"; } protected override void OnLoad(EventArgs e) { HookupButton(cmdComplete); } void HookupButton(LinkButton button) { // Use the click event of the LinkButton to trigger the postback (this is used by the .click code below) button.OnClientClick = Page.ClientScript.GetPostBackEventReference(button, String.Empty); // Wire up the .click event of the button to call the onclick function, and prevent a form submit string clickString = string.Format(@" alert('Wiring up click event'); document.getElementById('{0}').click = function() {{ alert('Default button pressed'); document.getElementById('{0}').onclick(); }};", button.ClientID, Page.ClientScript.GetPostBackEventReference(button, "")); Page.ClientScript.RegisterStartupScript(button.GetType(), "click_hookup_" + button.ClientID, clickString, true); } </script> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html> <head> <title>DefaultButton/LinkButton Testing</title> <style type="text/css"> a.Button { line-height: 2em; padding: 5px; border: solid 1px #CCC; background-color: #EEE; } </style> </head> <body> <h1> DefaultButton/LinkButton Testing</h1> <form runat="server"> <asp:ScriptManager runat="server" /> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <div style="position: relative"> <fieldset> <legend>Output</legend> <asp:Label runat="server" ID="lblOutput" /> </fieldset> <asp:Button runat="server" Text="First Button" ID="cmdFirstButton" OnClick="cmdFirstButton_Click" UseSubmitBehavior="false" /> <asp:Panel ID="Panel1" runat="server" DefaultButton="cmdComplete"> <label> Enter Text:</label> <asp:TextBox runat="server" ID="txtInput" /> <asp:LinkButton runat="server" CssClass="Button" ID="cmdComplete" OnClick="cmdComplete_Click" Text="Complete" /> </asp:Panel> </div> </ContentTemplate> </asp:UpdatePanel> <asp:Button runat="server" ID="cmdFullPostback" Text="Full Postback" /> </form> </body> </html>

  Read the article

• "The usage of semaphores is subtly wrong"

  - by Hoonose

  This past semester I was taking an OS practicum in C, in which the first project involved making a threads package, then writing a multiple producer-consumer program to demonstrate the functionality. However, after getting grading feedback, I lost points for "The usage of semaphores is subtly wrong" and "The program assumes preemption (e.g. uses yield to change control)" (We started with a non-preemptive threads package then added preemption later. Note that the comment and example contradict each other. I believe it doesn't assume either, and would work in both environments). This has been bugging me for a long time - the course staff was kind of overwhelmed, so I couldn't ask them what's wrong with this over the semester. I've spent a long time thinking about this and I can't see the issues. If anyone could take a look and point out the error, or reassure me that there actually isn't a problem, I'd really appreciate it. I believe the syntax should be pretty standard in terms of the thread package functions (minithreads and semaphores), but let me know if anything is confusing. #include <stdio.h> #include <stdlib.h> #include "minithread.h" #include "synch.h" #define BUFFER_SIZE 16 #define MAXCOUNT 100 int buffer[BUFFER_SIZE]; int size, head, tail; int count = 1; int out = 0; int toadd = 0; int toremove = 0; semaphore_t empty; semaphore_t full; semaphore_t count_lock; // Semaphore to keep a lock on the // global variables for maintaining the counts /* Method to handle the working of a student * The ID of a student is the corresponding minithread_id */ int student(int total_burgers) { int n, i; semaphore_P(count_lock); while ((out+toremove) < arg) { n = genintrand(BUFFER_SIZE); n = (n <= total_burgers - (out + toremove)) ? n : total_burgers - (out + toremove); printf("Student %d wants to get %d burgers ...\n", minithread_id(), n); toremove += n; semaphore_V(count_lock); for (i=0; i<n; i++) { semaphore_P(empty); out = buffer[tail]; printf("Student %d is taking burger %d.\n", minithread_id(), out); tail = (tail + 1) % BUFFER_SIZE; size--; toremove--; semaphore_V(full); } semaphore_P(count_lock); } semaphore_V(count_lock); printf("Student %d is done.\n", minithread_id()); return 0; } /* Method to handle the working of a cook * The ID of a cook is the corresponding minithread_id */ int cook(int total_burgers) { int n, i; printf("Creating Cook %d\n",minithread_id()); semaphore_P(count_lock); while ((count+toadd) <= arg) { n = genintrand(BUFFER_SIZE); n = (n <= total_burgers - (count + toadd) + 1) ? n : total_burgers - (count + toadd) + 1; printf("Cook %d wants to put %d burgers into the burger stack ...\n", minithread_id(),n); toadd += n; semaphore_V(count_lock); for (i=0; i<n; i++) { semaphore_P(full); printf("Cook %d is putting burger %d into the burger stack.\n", minithread_id(), count); buffer[head] = count++; head = (head + 1) % BUFFER_SIZE; size++; toadd--; semaphore_V(empty); } semaphore_P(count_lock); } semaphore_V(count_lock); printf("Cook %d is done.\n", minithread_id()); return 0; } /* Method to create our multiple producers and consumers * and start their respective threads by fork */ void starter(int* c){ int i; for (i=0;i<c[2];i++){ minithread_fork(cook, c[0]); } for (i=0;i<c[1];i++){ minithread_fork(student, c[0]); } } /* The arguments are passed as command line parameters * argv[1] is the no of students * argv[2] is the no of cooks */ void main(int argc, char *argv[]) { int pass_args[3]; pass_args[0] = MAXCOUNT; pass_args[1] = atoi(argv[1]); pass_args[2] = atoi(argv[2]); size = head = tail = 0; empty = semaphore_create(); semaphore_initialize(empty, 0); full = semaphore_create(); semaphore_initialize(full, BUFFER_SIZE); count_lock = semaphore_create(); semaphore_initialize(count_lock, 1); minithread_system_initialize(starter, pass_args); }

  Read the article

• Disaster, or Migration?

  - by Rob Farley

  This post is in two parts – technical and personal. And I should point out that it’s prompted in part by this month’s T-SQL Tuesday, hosted by Allen Kinsel. First, the technical: I’ve had a few conversations with people recently about migration – moving a SQL Server database from one box to another (sometimes, but not primarily, involving an upgrade). One question that tends to come up is that of downtime. Obviously there will be some period of time between the old server being available and the new one. The way that most people seem to think of migration is this: Build a new server. Stop people from using the old server. Take a backup of the old server Restore it on the new server. Reconfigure the client applications (or alternatively, configure the new server to use the same address as the old) Make the new server online. There are other things involved, such as testing, of course. But this is essentially the process that people tell me they’re planning to follow. The bit that I want to look at today (as you’ve probably guessed from my title) is the “backup and restore” section. If a SQL database is using the Simple Recovery Model, then the only restore option is the last database backup. This backup could be full or differential. The transaction log never gets backed up in the Simple Recovery Model. Instead, it truncates regularly to stay small. One that’s using the Full Recovery Model (or Bulk-Logged) won’t truncate its log – the log must be backed up regularly. This provides the benefit of having a lot more option available for restores. It’s a requirement for most systems of High Availability, because if you’re making sure that a spare box is up-and-running, ready to take over, then you have to be interested in the logs that are happening on the current box, rather than truncating them all the time. A High Availability system such as Mirroring, Replication or Log Shipping will initialise the spare machine by restoring a full database backup (and maybe a differential backup if available), and then any subsequent log backups. Once the secondary copy is close, transactions can be applied to keep the two in sync. The main aspect of any High Availability system is to have a redundant system that is ready to take over. So the similarity for migration should be obvious. If you need to move a database from one box to another, then introducing a High Availability mechanism can help. By turning on the Full Recovery Model and then taking a backup (so that the now-interesting logs have some context), logs start being kept, and are therefore available for getting the new box ready (even if it’s an upgraded version). When the migration is ready to occur, a failover can be done, letting the new server take over the responsibility of the old, just as if a disaster had happened. Except that this is a planned failover, not a disaster at all. There’s a fine line between a disaster and a migration. Failovers can be useful in patching, upgrading, maintenance, and more. Hopefully, even an unexpected disaster can be seen as just another failover, and there can be an opportunity there – perhaps to get some work done on the principal server to increase robustness. And if I’ve just set up a High Availability system for even the simplest of databases, it’s not necessarily a bad thing. :) So now the personal: It’s been an interesting time recently... June has been somewhat odd. A court case with which I was involved got resolved (through mediation). I can’t go into details, but my lawyers tell me that I’m allowed to say how I feel about it. The answer is ‘lousy’. I don’t regret pursuing it as long as I did – but in the end I had to make a decision regarding the commerciality of letting it continue, and I’m going to look forward to the days when the kind of money I spent on my lawyers is small change. Mind you, if I had a similar situation with an employer, I’d do the same again, but that doesn’t really stop me feeling frustrated about it. The following day I had to fly to country Victoria to see my grandmother, who wasn’t expected to last the weekend. She’s still around a week later as I write this, but her 92-year-old body has basically given up on her. She’s been a Christian all her life, and is looking forward to eternity. We’ll all miss her though, and it’s hard to see my family grieving. Then on Tuesday, I was driving back to the airport with my family to come home, when something really bizarre happened. We were travelling down the freeway, just pulled out to go past a truck (farm-truck sized, not a semi-trailer), when a car-sized mass of metal fell off it. It was something like an industrial air-conditioner, but from where I was sitting, it was just a mass of spinning metal, like something out of a movie (one friend described it as “holidays by Michael Bay”). Somehow, and I’m really don’t know how, the part of it nearest us bounced high enough to clear the car, and there wasn’t even a scratch. We pulled over the check, and I was just thanking God that we’d changed lanes when we had, and that we remained unharmed. I had all kinds of thoughts about what could’ve happened if we’d had something that size land on the windscreen... All this has drilled home that while I feel that I haven’t provided as well for the family as I could’ve done (like by pursuing an expensive legal case), I shouldn’t even consider that I have proper control over things. I get to live life, and make decisions based on what I feel is right at the time. But I’m not going to get everything right, and there will be things that feel like disasters, some which could’ve been in my control and some which are very much beyond my control. The case feels like something I could’ve pursued differently, a disaster that could’ve been avoided in some way. Gran dying is lousy of course. An accident on the freeway would have been awful. I need to recognise that the worst disasters are ones that I can’t affect, and that I need to look at things in context – perhaps seeing everything that happens as a migration instead. Life is never the same from one day to the next. Every event has a before and an after – sometimes it’s clearly positive, sometimes it’s not. I remember good events in my life (such as my wedding), and bad (such as the loss of my father when I was ten, or the back injury I had eight years ago). I’m not suggesting that I know how to view everything from the “God works all things for good” perspective, but I am trying to look at last week as a migration of sorts. Those things are behind me now, and the future is in God’s hands. Hopefully I’ve learned things, and will be able to live accordingly. I’ve come through this time now, and even though I’ll miss Gran, I’ll see her again one day, and the future is bright.

  Read the article

• SQL SERVER – Fix : Error : 3117 : The log or differential backup cannot be restored because no files

  - by pinaldave

  I received the following email from one of my readers. Dear Pinal, I am new to SQL Server and our regular DBA is on vacation. Our production database had some problem and I have just restored full database backup to production server. When I try to apply log back I am getting following error. I am sure, this is valid log backup file. Screenshot is attached. [Few other details regarding server/ip address removed] Msg 3117, Level 16, State 1, Line 1 The log or differential backup cannot be restored because no files are ready to roll forward. Msg 3013, Level 16, State 1, Line 1 RESTORE LOG is terminating abnormally. Screenshot attached. [Removed as it contained live IP address] Please help immediately. Well I have answered this question in my earlier post, 2 years ago, over here SQL SERVER – Fix : Error : Msg 3117, Level 16, State 4 The log or differential backup cannot be restored because no files are ready to rollforward. However, I will try to explain it a little more this time. For SQL Server database to be used it should in online state. There are multiple states of SQL Server Database. ONLINE (Available – online for data) OFFLINE RESTORING RECOVERING RECOVERY PENDING SUSPECT EMERGENCY (Limited Availability) If the database is online, it means it is active and in operational mode. It will not make sense to apply further log from backup if the operations have continued on this database. The common practice during the backup restore process is to specify the keyword RECOVERY when the database is restored. When RECOVERY keyword is specified, the SQL Server brings back the database online and will not accept any further log backups. However, if you want to restore more than one backup files, i.e. after restoring the full back up if you want to apply further differential or log backup you cannot do that when database is online and already active. You need to have your database in the state where it can further accept the backup data and not the online data request. If the SQL Server is online and also accepts database backup file, then there can be data inconsistency. This is the reason that when there are more than one database backup files to be restored, one has to restore the database with NO RECOVERY keyword in the RESTORE operation. I suggest you all to read one more post written by me earlier. In this post, I explained the time line with image and graphic SQL SERVER – Backup Timeline and Understanding of Database Restore Process in Full Recovery Model. Sample Code for reference: RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksFull.bak' WITH NORECOVERY; RESTORE DATABASE AdventureWorks FROM DISK = 'C:\AdventureWorksDiff.bak' WITH RECOVERY; In this post, I am not trying to cover complete backup and recovery. I am just attempting to address one type of error and its resolution. Please test these scenarios on the development server. Playing with live database backup and recovery is always very crucial and needs to be properly planned. Leave a comment here if you need help with this subject. Similar Post: SQL SERVER – Restore Sequence and Understanding NORECOVERY and RECOVERY Note: We will cover Standby Server maintenance and Recovery in another blog post and it is intentionally, not covered this post. Reference : Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, Readers Question, SQL, SQL Authority, SQL Backup and Restore, SQL Error Messages, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Advanced Data Source Engine coming to Telerik Reporting Q1 2010

  This is the final blog post from the pre-release series. In it we are going to share with you some of the updates coming to our reporting solution in Q1 2010. A new Declarative Data Source Engine will be added to Telerik Reporting, that will allow full control over data management, and deliver significant gains in rendering performance and memory consumption. Some of the engines new features will be: Data source parameters - those parameters will be used to limit data retrieved from the data source to just the data needed for the report. Data source parameters are processed on the data source side, however only queried data is fetched to the reporting engine, rather than the full data source. This leads to lower memory consumption, because data operations are performed on queried data only, rather than on all data. As a result, only the queried data needs to be stored in the memory vs. the whole dataset, which was the case with the old approach Support for stored procedures - they will assist in achieving a consistent implementation of logic across applications, and are especially practical for performing repetitive tasks. A stored procedure stores the SQL statements and logic, which can then be executed in different reports and/or applications. Stored Procedures will not only save development time, but they will also improve performance, because each stored procedure is compiled on the data base server once, and then is reutilized. In Telerik Reporting, the stored procedure will also be parameterized, where elements of the SQL statement will be bound to parameters. These parameterized SQL queries will be handled through the data source parameters, and are evaluated at run time. Using parameterized SQL queries will improve the performance and decrease the memory footprint of your application, because they will be applied directly on the database server and only the necessary data will be downloaded on the middle tier or client machine; Calculated fields through expressions - with the help of the new reporting engine you will be able to use field values in formulas to come up with a calculated field. A calculated field is a user defined field that is computed "on the fly" and does not exist in the data source, but can perform calculations using the data of the data source object it belongs to. Calculated fields are very handy for adding frequently used formulas to your reports; Improved performance and optimized in-memory OLAP engine - the new data source will come with several improvements in how aggregates are calculated, and memory is managed. As a result, you may experience between 30% (for simpler reports) and 400% (for calculation-intensive reports) in rendering performance, and about 50% decrease in memory consumption. Full design time support through wizards - Declarative data sources are a great advance and will save developers countless hours of coding. In Q1 2010, and true to Telerik Reportings essence, using the new data source engine and its features requires little to no coding, because we have extended most of the wizards to support the new functionality. The newly extended wizards are available in VS2005/VS2008/VS2010 design-time. More features will be revealed on the product's what's new page when the new version is officially released in a few days. Also make sure you attend the free webinar on Thursday, March 11th that will be dedicated to the updates in Telerik Reporting Q1 2010. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Raspberry Pi entrance signed backed by Umbraco - Part 1

  - by Chris Houston

  Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

  Read the article

• Outlook 2010 – My Top 9 features

  - by Daniel Moth

  Office 2010 has reached RTM. Here are my favorite Outlook features. Speed. It is faster than previous versions and hangs much less… Ignore Conversation (Ctrl+Del). Not interested in a conversation? Click this button on the new ribbon and you'll never receive another message on that thread (they all go to your Deleted folder). Calendar Preview. When receiving a Meeting Request, before deciding to accept or not you get to see a preview of your calendar for that day and where the new meeting would fit in. See full description on outlook team blog post. Quick Steps. See full description on outlook team blog post. I have created my own quick steps for filing conversations to folders, various pre-populated reply templates, creating calendar invites and creating TODOs from received emails. Search Interface. Many of us knew the magic keywords for making smart searches (e.g. from:Name), but it is great to learn many more through the search tools contextual ribbon tab. Next 7 days. Out of the many enhancements to the Calendar view, my favorite is to be able with  single click to view the next 7 days – that is now my default view. MailTips. See full description on outlook team blog post. The ones I particularly like are when composing a mail to someone that has their Out Of Office reply set, you get to read it before sending the mail (and hence can decide to postpone sending). when composing a mail to a distribution list, a message informs you of the number of recipients. Hopefully, senders will use that as a clue for narrowing down the recipient list or at least verifying that their mail should indeed be sent to so many people. "You are not responding to the latest message in this conversation. Click here to open it.". When composing a reply to a conversation and you have not picked the last message to reply to (don't you hate it when people split threads like that?), this is the inline message you see (under the MailTips area) and if you click on the message it opens the last mail in the conversation so you can reply to that. Rich "Conversation Settings" and in particular "Show Messages from Other Folders". For example, you can see in your inbox not only the message you received but also the reply you sent (it gets pulled in from the Sent folder). Another example: a conversation has been taking place on a distribution list (so your rules filed it to a folder) and they add you on the TO or CC line, so it appears in a different folder; regardless of which folder you open, you are able to see the entire conversation. Note that messages from other folders than the one you are browsing, appear in grey text so you can easily spot them. Reading them in one folder, obviously marks them as read in the other folder… If you haven't yet, when are you making the move to Outlook 2010? Comments about this post welcome at the original blog.

  Read the article

• How to create managed properties at site collection level in SharePoint2013

  - by ybbest

  In SharePoint2013, you can create managed properties at site collection. Today, I’d like to show you how to do so through PowerShell. 1. Define your managed properties and crawled properties and managed property Type in an external csv file. PowerShell script will read this file and create the managed and the mapping. 2. As you can see I also defined variant Type, this is because you need the variant type to create the crawled property. In order to have the crawled properties, you need to do a full crawl and also make sure you have data populated for your custom column. However, if you do not want to a full crawl to create those crawled properties, you can create them yourself by using the PowerShell; however you need to make sure the crawled properties you created have the same name if created by a full crawl. Managed properties type: Text = 1 Integer = 2 Decimal = 3 DateTime = 4 YesNo = 5 Binary = 6 Variant Type: Text = 31 Integer = 20 Decimal = 5 DateTime = 64 YesNo = 11 3. You can use the following script to create your managed properties at site collection level, the differences for creating managed property at site collection level is to pass in the site collection id. param( [string] $siteUrl="http://SP2013/", [string] $searchAppName = "Search Service Application", $ManagedPropertiesList=(IMPORT-CSV ".\ManagedProperties.csv") ) Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue $searchapp = $null function AppendLog { param ([string] $msg, [string] $msgColor) $currentDateTime = Get-Date $msg = $msg + " --- " + $currentDateTime if (!($logOnly -eq $True)) { # write to console Write-Host -f $msgColor $msg } # write to log file Add-Content $logFilePath $msg } $scriptPath = Split-Path $myInvocation.MyCommand.Path $logFilePath = $scriptPath + "\CreateManagedProperties_Log.txt" function CreateRefiner {param ([string] $crawledName, [string] $managedPropertyName, [Int32] $variantType, [Int32] $managedPropertyType,[System.GUID] $siteID) $cat = Get-SPEnterpriseSearchMetadataCategory –Identity SharePoint -SearchApplication $searchapp $crawledproperty = Get-SPEnterpriseSearchMetadataCrawledProperty -Name $crawledName -SearchApplication $searchapp -SiteCollection $siteID if($crawledproperty -eq $null) { Write-Host AppendLog "Creating Crawled Property for $managedPropertyName" Yellow $crawledproperty = New-SPEnterpriseSearchMetadataCrawledProperty -SearchApplication $searchapp -VariantType $variantType -SiteCollection $siteID -Category $cat -PropSet "00130329-0000-0130-c000-000000131346" -Name $crawledName -IsNameEnum $false } $managedproperty = Get-SPEnterpriseSearchMetadataManagedProperty -Identity $managedPropertyName -SearchApplication $searchapp -SiteCollection $siteID -ErrorAction SilentlyContinue if($managedproperty -eq $null) { Write-Host AppendLog "Creating Managed Property for $managedPropertyName" Yellow $managedproperty = New-SPEnterpriseSearchMetadataManagedProperty -Name $managedPropertyName -Type $managedPropertyType -SiteCollection $siteID -SearchApplication $searchapp -Queryable:$true -Retrievable:$true -FullTextQueriable:$true -RemoveDuplicates:$false -RespectPriority:$true -IncludeInMd5:$true } $mappedProperty = $crawledproperty.GetMappedManagedProperties() | ?{$_.Name -eq $managedProperty.Name } if($mappedProperty -eq $null) { Write-Host AppendLog "Creating Crawled -> Managed Property mapping for $managedPropertyName" Yellow New-SPEnterpriseSearchMetadataMapping -CrawledProperty $crawledproperty -ManagedProperty $managedproperty -SearchApplication $searchapp -SiteCollection $siteID } $mappedProperty = $crawledproperty.GetMappedManagedProperties() | ?{$_.Name -eq $managedProperty.Name } #Get-FASTSearchMetadataCrawledPropertyMapping -ManagedProperty $managedproperty } $searchapp = Get-SPEnterpriseSearchServiceApplication $searchAppName $site= Get-SPSite $siteUrl $siteId=$site.id Write-Host "Start creating Managed properties" $i = 1 FOREACH ($property in $ManagedPropertiesList) { $propertyName=$property.managedPropertyName $crawledName=$property.crawledName $managedPropertyType=$property.managedPropertyType $variantType=$property.variantType Write-Host $managedPropertyType Write-Host "Processing managed property $propertyName $($i)..." $i++ CreateRefiner $crawledName $propertyName $variantType $managedPropertyType $siteId Write-Host "Managed property created " $propertyName } Key Concepts Crawled Properties: Crawled properties are discovered by the search index service component when crawling content. Managed Properties: Properties that are part of the Search user experience, which means they are available for search results, advanced search, and so on, are managed properties. Mapping Crawled Properties to Managed Properties: To make a crawled property available for the Search experience—to make it available for Search queries and display it in Advanced Search and search results—you must map it to a managed property. References Administer search in SharePoint 2013 Preview Managing Metadata New-SPEnterpriseSearchMetadataCrawledProperty New-SPEnterpriseSearchMetadataManagedProperty Remove-SPEnterpriseSearchMetadataManagedProperty Overview of crawled and managed properties in SharePoint 2013 Preview Remove-SPEnterpriseSearchMetadataManagedProperty SharePoint 2013 – Search Service Application

  Read the article

• Silverlight Cream for March 09, 2011 -- #1057

  - by Dave Campbell

  In this Issue: Dennis Doomen, Peter Kuhn, Michael Crump, Joe McBride, Martin Krüger, Jeremy Likness, Manas Patnaik, Jesse Liberty(-2-), WindowsPhoneGeek(-2-). Above the Fold: Silverlight: "A highlighting AutoCompleteBox in Silverlight" Peter Kuhn WP7: "WP7 WatermarkedTextBox custom control" WindowsPhoneGeek Training: "" Shoutouts: Karl Shifflett announced that he and Josh Smith have heard the developers and released a demo: Mole 2010 Demo Released This is a somewhat older post, but the material is good and I was reminded of it while talking to Josh Smith at the MVP summit last week: Advanced MVVM ... money well-spent From SilverlightCream.com: Introducing the Silverlight Cookbook Dennis Doomen unveils a Codeplex site "containing a Silverlight 4 app that includes most of the complexities you might run into" ... I'm tagging this in my WynApse outlookbar... great stuff, Dennis! A highlighting AutoCompleteBox in Silverlight Peter Kuhn took on a task in response to a forum query and created a highlighting AutoCompleteBox, and is giving it to us... this really looks cool, Peter, and great explanation. Taking a look at the Mindscape Phone Elements for WP7. Michael Crump takes a good look at the Mindscape Phone Elements for WP7... and if you read closely you might still be able to get a free license! Windows Phone – “Can’t connect to your phone. Disconnect it, Restart it, then try connecting again.” Joe McBride explains a way out of an issue that many should be seeing as we repave or replace machines... how to get our device recognized on the updated machine... without giving cryptic messages. How to: only with the full visibility of an application in the browser window start an action Martin Krüger continues his journey in starting storyboards and tackles the condition that the application is completely in the browser window prior to the storyboard starting. A Numeric Input Control for Windows Phone 7 Jeremy Likness came up with a great idea for numeric input for WP7 ... you'll smile when you see it, but what a great idea... and a NumericTextBox to go along with it. Performing CRUD on Relational Data (Multiple table) using RIA in SL4 Manas Patnaik has a post up that breaks the normal blog post or demo mold by having two tables with a relational constraint and doing CRUD operations on them. Plenty of diagrams and good information. Select Many: Reactive Extensions’ Mother Of All Operators [Chaining] Jesse Liberty has part 9 in his Rx series up, and is looking at SelectMany this time, and chaining calls. He's using WPF for the sample, but the goodness is all there for us Silverlight guys too. The Full Stack 8–Adding Search to the Phone Client Jesse Liberty and Jon Galloway have part 8 of their Full Stack series up ... this is the MVC3, ASP.NET, Silverlight, and WP7 app development series... this time out they're putting Search in the Phone client. All about ResourceDictionary in WP7 WindowsPhoneGeek is discussing ResourceDictionaries in this post... beginning with What is a ResourceDictionary and continuing out through creating and using one, plus a good comment on merging. WP7 WatermarkedTextBox custom control In his next post, WindowsPhoneGeek walks us through the creation of a WatermarkedTextBox for WP7 right from the derivation from TextBox... very nice tutorial and lots of code/examples. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Fill a Flash Drive with Portable Software using Lupo PenSuite

  - by Asian Angel

  A flash drive full of portable software is helpful to have along wherever you go. The Lupo PenSuite lets you choose from three different versions to get the best fit for your everyday needs. Note: If running the full version you will need a 512 MB USB flash drive or larger. Using Lupo PenSuite The one window to watch for during the setup process is where you have the opportunity to add a specific language pack if needed. Outside of that all that you need to do is sit back and wait for the suite to be extracted. Note: Extraction times will vary based on version and extraction location. Here we browsed to our flash drive to extract it to… Once the setup process is complete locate and double click the Lupo_PenSuite.exe file. This one time window will present you the opportunity to start using the suite immediately, or go directly into the options. When the suite is active you will have a new system tray icon that operates as a start menu button. At the bottom you can monitor the remaining room on your flash drive, and use the close button to exit the suite (may display as a power button based on menu theme). A quick look at the set up inside the suite. There is a pre-configured area for organizing and storing your personal files. Prefer a classic style menu? Just select for it in the options (various tab) and enjoy a smaller streamlined look. Note: You can also change the theme for the regular menu and add a user pic. The suite provides access to your portable software and online sites. You get to enjoy the best of both as shown in the following examples. Websites will open using the suite’s portable Firefox install. VLC is ready to play your downloaded videos. The suite also has some very nice photo editing programs added in. Installing Additional Apps If one of your favorite programs is not included in the suite version, it only takes a few minutes to add it in. Go to the Additional Apps webpage, download the app(s), and extract them onto your hard-drive. Note: Link for additional apps webpage provided below. Add the extracted app(s) to the MyApps folder in the suite’s folder hierarchy. Click on ASuite in the suite’s start menu. Drag and drop the portable app’s exe file into the MyApps section in the ASuite window. Your new software’s shortcut should display as shown here. Close this window when finished. Checking the suite’s start menu will show your new software ready to be used. Conclusion If you need a good portable software collection to carry with you on a flash drive then Lupo PenSuite is definitely worth taking a look at. We tested Lupo PenSuite on XP, Vista, and Windows 7 and it works great on all three. Another popular choice is PortableApps and you can check out our Review of that too they are essentially the same thing, each is just packaged differently. Links Download Lupo PenSuite (Full, Lite, & Zero versions) *Download links approximately one-third down the page. Download Additional Apps for Lupo PenSuite Download Additional Skins for Lupo PenSuite Start Menu View Video Tutorials *Has tutorial for easy updating of entire suite. Similar Articles Productive Geek Tips Install and Run Applications from Your iPod, Flash Drive or Mp3 PlayerRebit Backup Software [Review]BitLocker To Go Encrypts Portable Flash Drives in Windows 7Create a Bootable Ubuntu USB Flash Drive the Easy WaySpeed up Your Windows Vista Computer with ReadyBoost TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor

  Read the article

• How to create managed properties at site collection level in SharePoint2013

  - by ybbest

  In SharePoint2013, you can create managed properties at site collection. Today, I’d like to show you how to do so through PowerShell. 1. Define your managed properties and crawled properties and managed property Type in an external csv file. PowerShell script will read this file and create the managed and the mapping. 2. As you can see I also defined variant Type, this is because you need the variant type to create the crawled property. In order to have the crawled properties, you need to do a full crawl and also make sure you have data populated for your custom column. However, if you do not want to a full crawl to create those crawled properties, you can create them yourself by using the PowerShell; however you need to make sure the crawled properties you created have the same name if created by a full crawl. Managed properties type: Text = 1 Integer = 2 Decimal = 3 DateTime = 4 YesNo = 5 Binary = 6 Variant Type: Text = 31 Integer = 20 Decimal = 5 DateTime = 64 YesNo = 11 3. You can use the following script to create your managed properties at site collection level, the differences for creating managed property at site collection level is to pass in the site collection id. param( [string] $siteUrl="http://SP2013/", [string] $searchAppName = "Search Service Application", $ManagedPropertiesList=(IMPORT-CSV ".\ManagedProperties.csv") ) Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue $searchapp = $null function AppendLog { param ([string] $msg, [string] $msgColor) $currentDateTime = Get-Date $msg = $msg + " --- " + $currentDateTime if (!($logOnly -eq $True)) { # write to console Write-Host -f $msgColor $msg } # write to log file Add-Content $logFilePath $msg } $scriptPath = Split-Path $myInvocation.MyCommand.Path $logFilePath = $scriptPath + "\CreateManagedProperties_Log.txt" function CreateRefiner {param ([string] $crawledName, [string] $managedPropertyName, [Int32] $variantType, [Int32] $managedPropertyType,[System.GUID] $siteID) $cat = Get-SPEnterpriseSearchMetadataCategory –Identity SharePoint -SearchApplication $searchapp $crawledproperty = Get-SPEnterpriseSearchMetadataCrawledProperty -Name $crawledName -SearchApplication $searchapp -SiteCollection $siteID if($crawledproperty -eq $null) { Write-Host AppendLog "Creating Crawled Property for $managedPropertyName" Yellow $crawledproperty = New-SPEnterpriseSearchMetadataCrawledProperty -SearchApplication $searchapp -VariantType $variantType -SiteCollection $siteID -Category $cat -PropSet "00130329-0000-0130-c000-000000131346" -Name $crawledName -IsNameEnum $false } $managedproperty = Get-SPEnterpriseSearchMetadataManagedProperty -Identity $managedPropertyName -SearchApplication $searchapp -SiteCollection $siteID -ErrorAction SilentlyContinue if($managedproperty -eq $null) { Write-Host AppendLog "Creating Managed Property for $managedPropertyName" Yellow $managedproperty = New-SPEnterpriseSearchMetadataManagedProperty -Name $managedPropertyName -Type $managedPropertyType -SiteCollection $siteID -SearchApplication $searchapp -Queryable:$true -Retrievable:$true -FullTextQueriable:$true -RemoveDuplicates:$false -RespectPriority:$true -IncludeInMd5:$true } $mappedProperty = $crawledproperty.GetMappedManagedProperties() | ?{$_.Name -eq $managedProperty.Name } if($mappedProperty -eq $null) { Write-Host AppendLog "Creating Crawled -> Managed Property mapping for $managedPropertyName" Yellow New-SPEnterpriseSearchMetadataMapping -CrawledProperty $crawledproperty -ManagedProperty $managedproperty -SearchApplication $searchapp -SiteCollection $siteID } $mappedProperty = $crawledproperty.GetMappedManagedProperties() | ?{$_.Name -eq $managedProperty.Name } #Get-FASTSearchMetadataCrawledPropertyMapping -ManagedProperty $managedproperty } $searchapp = Get-SPEnterpriseSearchServiceApplication $searchAppName $site= Get-SPSite $siteUrl $siteId=$site.id Write-Host "Start creating Managed properties" $i = 1 FOREACH ($property in $ManagedPropertiesList) { $propertyName=$property.managedPropertyName $crawledName=$property.crawledName $managedPropertyType=$property.managedPropertyType $variantType=$property.variantType Write-Host $managedPropertyType Write-Host "Processing managed property $propertyName $($i)..." $i++ CreateRefiner $crawledName $propertyName $variantType $managedPropertyType $siteId Write-Host "Managed property created " $propertyName } Key Concepts Crawled Properties: Crawled properties are discovered by the search index service component when crawling content. Managed Properties: Properties that are part of the Search user experience, which means they are available for search results, advanced search, and so on, are managed properties. Mapping Crawled Properties to Managed Properties: To make a crawled property available for the Search experience—to make it available for Search queries and display it in Advanced Search and search results—you must map it to a managed property. References Administer search in SharePoint 2013 Preview Managing Metadata

  Read the article

• CodePlex Daily Summary for Wednesday, June 13, 2012

  CodePlex Daily Summary for Wednesday, June 13, 2012Popular ReleasesPublic Key Infrastructure PowerShell module: PowerShell PKI Module v1.8: Installation guide: Use default installation path to install this module for current user only. To install this module for all users — enable "Install for all users" check-box in installation UI Note: if previous module installations are detected, they are removed during upgrade. Note: PowerShell 3.0 RC is now supported. Note: Windows Server 2012 is partially supported (output formatting is not working for me). Release notes for version 1.8.0: Version 1.8 introduces a set of new .NET clas...Metodología General Ajustada - MGA: 02.07.02: Cambios Parmenio: Corrección para que se generen los objetivos en el formato PRO_F03. Se debe ejcutar el script en la BD. Cambios John: Soporte técnico telefónico y por correo electrónico. Integración de código fuente. Se ajustan los siguientes formatos para que no dupliquen los anexos al hacer clic dos veces en Actualizar: FORMATO ID 03 - ANALISIS DE PARTICIPANTES, FORMATO ID 05 - OBJETIVOS.Generación de instaladores: Conectado y Desconectado.BlackJumboDog: Ver5.6.4: 2012.06.13 Ver5.6.4 　(1) Web???????、???POST??????????????????Yahoo! UI Library: YUI Compressor for .Net: Version 2.0.0.0 - Ferret: - Merging both 3.5 and 2.0 codebases to a single .NET 2.0 assembly. - MSBuild Task. - NAnt Task.ExcelFileEditor: .CS File: nothingBizTalk Scheduled Task Adapter: Release 4.0: Works with BizTalk Server 2010. Compiled in .NET Framework 4.0. In this new version are available small improvements compared to the current version (3.0). We can highlight the following improvements or changes: 24 hours support in “start time” property. Previous versions had an issue with setting the start time, as it shown 12 hours watch but no AM/PM. Daily scheduler review. Solved a small bug on Daily Properties: unable to switch between “Every day” and “on these days” Installation e...Weapsy - ASP.NET MVC CMS: 1.0.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsQTP FT Uninstaller: QTP FT Uninstaller v3: - KnowledgeInbox has made this tool open source - Converted to C# - Better scanning & cleaning mechanismWebSocket4Net: WebSocket4Net 0.7: Changes included in this release: updated ClientEngine added proper exception handling code added state support for callback added property AllowUnstrustedCertificate for JsonWebSocket added properties for sending ping automatically improved JsBridge fixed a uri compatibility issueXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...Liberty: v3.2.1.0 Release 10th June 2012: Change Log -Added -Liberty is now digitally signed! If the certificate on Liberty.exe is missing, invalid, or does not state that it was developed by "Xbox Chaos, Open Source Developer," your copy of Liberty may have been altered in some (possibly malicious) way. -Reach Mass biped max health and shield changer -Fixed -H3/ODST Fixed all of the glitches that users kept reporting (also reverted the changes made in 3.2.0.2) -Reach Made some tag names clearer and more consistent between m...AutoUpdaterdotNET : Autoupdate for VB.NET and C# Developer: AutoUpdater.NET 1.0: Everything seems perfect if you find any problem you can report to http://www.rbsoft.org/contact.htmlMedia Companion: Media Companion 3.503b: It has been a while, so it's about time we release another build! Major effort has been for fixing trailer downloads, plus a little bit of work for episode guide tag in TV show NFOs.Microsoft SQL Server Product Samples: Database: AdventureWorks Sample Reports 2008 R2: AdventureWorks Sample Reports 2008 R2.zip contains several reports include Sales Reason Comparisons SQL2008R2.rdl which uses Adventure Works DW 2008R2 as a data source reference. For more information, go to Sales Reason Comparisons report.Json.NET: Json.NET 4.5 Release 7: Fix - Fixed Metro build to pass Windows Application Certification Kit on Windows 8 Release Preview Fix - Fixed Metro build error caused by an anonymous type Fix - Fixed ItemConverter not being used when serializing dictionaries Fix - Fixed an incorrect object being passed to the Error event when serializing dictionaries Fix - Fixed decimal properties not being correctly ignored with DefaultValueHandlingLINQ Extensions Library: 1.0.3.0: New to release 1.0.3.0:Combinatronics: Combinations (unique) Combinations (with repetition) Permutations (unique) Permutations (with repetition) Convert jagged arrays to fixed multidimensional arrays Convert fixed multidimensional arrays to jagged arrays ElementAtMax ElementAtMin ElementAtAverage New set of array extension (1.0.2.8):Rotate Flip Resize (maintaing data) Split Fuse Replace Append and Prepend extensions (1.0.2.7) IndexOf extensions (1.0.2.7) Ne...????????API for .Net SDK: SDK for .Net ??? Release 1: 6?12????? ??? - ?????.net2.0?.net4.0????Winform?Web???????。 NET2 - .net 2.0?Winform?Web???? NET4 - .net 4.0?Winform?Web???? Libs - SDK ???，??2.0?4.0?SDK??? 6?11????? ??? - ?Entities???????????EntityBase，???ToString()???????json???，??????4.0???????。2.0?3.5???！ ??? - Request????????AccessToken??????source=appkey?????。????，????????，???????public_timeline?????????。 ?? - ???ClinetLogin??????????RefreshToken???????false???。 ?? - ???RepostTimeline????Statuses???null???。 ?? - Utility?Bui...Audio Pitch & Shift: Audio Pitch And Shift 4.5.0: Added Instruments tab for modules Open folder content feature Some bug fixesNew Projects4SQ - Foursquare for WP7: This is a public Foursquare App, designed for the COMMUNITY for WP7.Alert Management Web Part: Business Problem: In a Project management site, When new project sites created, Project Manager creates alerts for all team members in multiple Lists/Libraries. Pain point is: He need to manually create alerts by going to each and every list/library >> Alert Me >> and then adding users to keep them informed. Yes, Its a pain for them to add users one by one in all of the lists and libraries, Solution: we started creating Custom Alert Management web part which will solve this problem. K...An Un-sql SQL Database Installer: D.E.M.O.N SQL Database Installer is an Un-SQL(SQL means boring here) Database server installer for many types of Database :MySQL, SQLite and others.Aqzgf: android for qzgfbaoming: ????????????，???dbentry.net 4.2??????。Comdaybe 2012_knockoutjs examples: This is a visual studio 2012 project containing all the demo's of #comdaybe 2012. more information on: http://www.communityday.be/ETExplorer: This application is a replacement for the standard windows explorer. When I began working with Windows 7 I noticed that some of the features I liked from XP were missing. After trying many freeware replacements and not finding any of them having all the features I needed, I decided to develop my own explorer replacement.ExamAnalysis: Exam Analysis Website (building...)FizzBuzz: FizzBuzzImproved Dnn Event Log Email Notification provider: The email notifications for log events in Dnn are poor. This project aims to improve them through a new logging provider. The initial work uses the existing logging provider and just overrides the SendLogNotifications method. Over time hopefully this will be improved to enhance the email sending capabilities of Dnn.InfoMap: a framework for mapsiTextSharp MPL for Silverlight & Windows Phone: This is a port of the iText Sharp (4.2) that was the last version published under the Mozilla Public License for Silverlight and Windows Phone. You can use this version in a commercial application and it does not require your app to be released as open source. You do not need any kind of license from anyone to use this unless you want to change the publishing information (where it sets iText as the publisher)ModifyMimeTypes: In Exchange 2007 and 2010, the Content-Type encoding for MIME attachments is determined by a list which is stored in the Exchange Organization container in Active Directory within the msExchMimeTypes property. The list can be easily viewed in the Exchange Management Shell using: •(Get-OrganizationConfig).MimeTypes The list is order specific. So if two entries exist for the same attachment type, the one earlier in the list will be the one that is used. One example of this is the encod...Monitor Reporting Services with PowerPivot: PowerPivot workbook with a connection to Reporting Service log. Several built in reports are already created in the workbook. You will need to connect to the execution log 2 view in your report server database. Typically the report server Database is named ReportServer. The view to query is named is ExecutionLog2. You may need to add a where clause to the query in the workbook to limit the data you want to see. I already have a where cluase that limits it to only rendered reports. The Date...QCats: QCats put hearts into socail relationship.Rad sa bazom: Ovo je samo proba, brsem brzoREJS: An easy to use, easy to implement Razor preparser for CSS and JS with support for caching, external data, LESS and much more.RexSharp: RexSharp is a relatively new web framework, that can easily be integrated with ASP.NET. It is based largely on the Websharper framework, written in F# - but with significant additions and optimizations. Like Websharper, RexSharp aims to make web and mobile app development a lot more fun, with F#. This is a preliminary release - detailed instructions for using the framework will be made available in a short while. ShareDev.Webparts: Coming soon...SharePoint Common Framework: SharepointCommon is a framework for Microsoft SharePoint 2010© Server and Foundation. It allows to map list items to simple hand-writen POCO classes and perform actions by manipulate with entities.Solution Extender for Microsoft Dynamics CRM 2011: Solution Extender makes it easier for Dynamics CRM 2011 integrators to export/import components that can't be included in solutions. You will be able to export/import Duplicate detection rules, Saved views and more to come It's developed in C#.System Center 2012 - Orchestrator Integration Packs and Utilities: System Center 2012 - Orchestrator Integration Packs and UtilitiesTalkBack: A small library to enable decoupled communication between different components.Tomson Scattering for GDT: Tomson is a software used on Gas Dynamic Trap setup in Institute of Nuclear Physics of Russian Academy of Sciences for electron temperature calculation in plasma based on tomson scattering method measurements.tony first project: first projectVirtual Card Table: This is a classroom project for explaining TDD.WellFound Yachts: WellFound Yachts

  Read the article

• CodePlex Daily Summary for Tuesday, June 12, 2012

  CodePlex Daily Summary for Tuesday, June 12, 2012Popular ReleasesWeapsy - ASP.NET MVC CMS: 1.0 RC: - Upgrade to Entity Framework 4.3.1 - Added AutoMapper custom version (by nopCommerce Team) - Added missed model properties and localization resources of Plugin Definitions - Minor changes - Fixed some bugsSolution Extender for Microsoft Dynamics CRM 2011: Solution Extender (1.0.0.0): Initial releaseQTP FT Uninstaller: QTP FT Uninstaller v3: - KnowledgeInbox has made this tool open source - Converted to C# - Better scanning & cleaning mechanismWebSocket4Net: WebSocket4Net 0.7: Changes included in this release: updated ClientEngine added proper exception handling code added state support for callback added property AllowUnstrustedCertificate for JsonWebSocket added properties for sending ping automatically improved JsBridge fixed a uri compatibility issueXenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.8.0 Beta: Catalog and Publication reviews and ratings Store language packs in data base Improve reporting system Improve Import/Export system A lot of WebAdmin app UI improvements Initial implementation of the WebForum app DB indexes Improve and simplify architecture Less abstractions Modernize architecture Improve, simplify and unify API Simplify and improve testing A lot of new unit tests Codebase refactoring and ReSharpering Utilize Castle Windsor Utilize NHibernate ORM ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.55: Properly handle IE extension to CSS3 grammar that allows for multiple parameters to functional pseudo-class selectors. add new switch -braces:(new|same) that affects where opening braces are placed in multi-line output. The default, "new" puts them on their own new line; "same" outputs them at the end of the previous line. add new optional values to the -inline switch: -inline:(force|noforce), which can be combined with the existing boolean value via comma-separators; value "force" (which...Microsoft Media Platform: Player Framework: MMP Player Framework 2.7 (Silverlight and WP7): Additional DownloadsSMFv2.7 Full Installer (MSI) - This will install everything you need in order to develop your own SMF player application, including the IIS Smooth Streaming Client. It only includes the assemblies. If you want the source code please follow the link above. Smooth Streaming Sample Player - This is a pre-built player that includes support for IIS Smooth Streaming. You can configure the player to playback your content by simplying editing a configuration file - no need to co...Liberty: v3.2.1.0 Release 10th June 2012: Change Log -Added -Liberty is now digitally signed! If the certificate on Liberty.exe is missing, invalid, or does not state that it was developed by "Xbox Chaos, Open Source Developer," your copy of Liberty may have been altered in some (possibly malicious) way. -Reach Mass biped max health and shield changer -Fixed -H3/ODST Fixed all of the glitches that users kept reporting (also reverted the changes made in 3.2.0.2) -Reach Made some tag names clearer and more consistent between m...SHA-1 Hash Checker: SHA-1 Hash Checker (for Windows): Fixed major bugs. Removed false negatives.AutoUpdaterdotNET: AutoUpdater.NET 1.0: Everything seems perfect if you find any problem you can report to http://www.rbsoft.org/contact.htmlMedia Companion: Media Companion 3.503b: It has been a while, so it's about time we release another build! Major effort has been for fixing trailer downloads, plus a little bit of work for episode guide tag in TV show NFOs.Microsoft SQL Server Product Samples: Database: AdventureWorks Sample Reports 2008 R2: AdventureWorks Sample Reports 2008 R2.zip contains several reports include Sales Reason Comparisons SQL2008R2.rdl which uses Adventure Works DW 2008R2 as a data source reference. For more information, go to Sales Reason Comparisons report.Json.NET: Json.NET 4.5 Release 7: Fix - Fixed Metro build to pass Windows Application Certification Kit on Windows 8 Release Preview Fix - Fixed Metro build error caused by an anonymous type Fix - Fixed ItemConverter not being used when serializing dictionaries Fix - Fixed an incorrect object being passed to the Error event when serializing dictionaries Fix - Fixed decimal properties not being correctly ignored with DefaultValueHandlingLINQ Extensions Library: 1.0.3.0: New to release 1.0.3.0:Combinatronics: Combinations (unique) Combinations (with repetition) Permutations (unique) Permutations (with repetition) Convert jagged arrays to fixed multidimensional arrays Convert fixed multidimensional arrays to jagged arrays ElementAtMax ElementAtMin ElementAtAverage New set of array extension (1.0.2.8):Rotate Flip Resize (maintaing data) Split Fuse Replace Append and Prepend extensions (1.0.2.7) IndexOf extensions (1.0.2.7) Ne...????????API for .Net SDK: SDK for .Net ??? Release 1: 6?12????? ??? - ?????.net2.0?.net4.0????Winform?Web???????。 NET2 - .net 2.0?Winform?Web???? NET4 - .net 4.0?Winform?Web???? Libs - SDK ???，??2.0?4.0?SDK??? 6?11????? ??? - ?Entities???????????EntityBase，???ToString()???????json???，??????4.0???????。2.0?3.5???！ ??? - Request????????AccessToken??????source=appkey?????。????，????????，???????public_timeline?????????。 ?? - ???ClinetLogin??????????RefreshToken???????false???。 ?? - ???RepostTimeline????Statuses???null???。 ?? - Utility?Bui...Audio Pitch & Shift: Audio Pitch And Shift 4.5.0: Added Instruments tab for modules Open folder content feature Some bug fixesPython Tools for Visual Studio: 1.5 Beta 1: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 Beta. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including: • Supports CPython, IronPython, Jython and PyPy • Python editor with advanced member, signature intellisense and refactoring • Code navigation: “Find all refs”, goto definition, and object browser • Local and remote debugging •...Circuit Diagram: Circuit Diagram 2.0 Beta 1: New in this release: Automatically flip components when placing Delete components using keyboard delete key Resize document Document properties window Print document Recent files list Confirm when exiting with unsaved changes Thumbnail previews in Windows Explorer for CDDX files Show shortcut keys in toolbox Highlight selected item in toolbox Zoom using mouse scroll wheel while holding down ctrl key Plugin support for: Custom export formats Custom import formats Open...Umbraco CMS: Umbraco CMS 5.2 Beta: The future of Umbracov5 represents the future architecture of Umbraco, so please be aware that while it's technically superior to v4 it's not yet on a par feature or performance-wise. What's new? For full details see our http://progress.umbraco.org task tracking page showing all items complete for 5.2. In a nutshellPackage Builder Starter Kits Dynamic Extension Methods Querying / IsHelpers Friendly alt template URLs Localization Various bug fixes / performance enhancements Gett...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.0.5: JayData is a unified data access library for JavaScript developers to query and update data from different sources like WebSQL, IndexedDB, OData, Facebook or YQL. See it in action in this 6 minutes video New features in JayData 1.0.5http://jaydata.org/blog/jaydata-1.0.5-is-here-with-authentication-support-and-more http://jaydata.org/blog/release-notes Sencha Touch 2 module (read-only)This module can be used to bind data retrieved by JayData to Sencha Touch 2 generated user interface. (exam...New ProjectsAFS.Aspnet.Collab.Site: alles umfassender testAFS.FallBackService: Afs.ultimate.fallbackserviceAIMS: This project aims at creating an mvc-based application for NGO portfolio management.Card Douglas: Project for card discountCrashReporter.NET: Send crash reports for c# or vb.net applications directly to your mail's inbox Daphne Translator - localizing tool for Daphne: This project was created as a helper project for localization Daphne checkers software [url:http://daphne.codeplex.com]. It can be used by other developers to do translations of resources. Daphne Translator is done to be extensible by any resource type of localized texts. ExcelFileEditor: This project is a free excel file editor class library . ( Support " .xls and .xlsx " )Finegypt: Fin EgyptHuish: Huish MarineINNO DNN Open Registration: The INNO DNN Registration module collection allows for customized DotNetNuke registration, payment processing integration, profile management, transaction history and a powerful contact us form. It is built to be responsive to allow registration on mobile devices such as Android phones and tablets, iPad, iPhone and more. Key focus is on extensibility including options to hook your own custom DotNetNuke modules into it for consistent, easy registration of users.jCardView: jCardViewLinkCard: D? án VDOS - TopLinkLINQ Expression Projection: Project Description LINQ Expression Projection library provides tool that enable using lambda expressions in LINQ projections (to anonymous and predefined types) even if the lambda expression is not defined in the query but rather is stored in a variable or retrieved via a function or property. Goal This library is a tool for development of applications following the DRY principle. It is used to facilitate reuse LINQ expressions.MD5 Message-Digest Algorithm for Microsoft® .NET Micro Framework: MD5 Message-Digest Algorithm for Microsoft® .NET Micro FrameworkMoney Class for C#. Fast, light and flexible: This Money class gives you the ability to work with money of multiple currencies as if it were built-in types. It looks and behaves like a decimal with extra features, but can perform much faster.NCT-Medical Record System: I've created this project for learning purposes onlyPaiPaiAPI: ??SDKParadise Shop: sâsâsaPingyThingy: PingyThingy is a basic application that will allow you to ping multiple hosts.SCK - Spine Model Creation Kit: The SCK is a software package for generating FE spine models from a set of anatomical parameters.ScoreMS（????????）: The summary is required.SiteCoreDynamicForm: This project's aim is to provide a simple solution in SiteCore for creating dynamic formsSmall Media Library (for Games and other 3D rendering applications): A .NET library that utilises DirectShow to render video into a block of memory that can be easily written to surfaces managed by rendering APIs such as DirectX and OpenGL, or used in any other way the host application requires.SportStore: The project has only training purpose. It is an ecommerce web application to sell sport products on line.Thesis Management System: This is a Thesis Management System(TMIS),Based on a three-tier structure,This is a open source project.There are many question and bugs ,I will repair by other time.This PowerShell script will output details of your default organization.: This is a PowerShell script. You can save this PowerShell file 'DefaultCRMOrganization.ps1' to your server. Microsoft Dynamics CRM administrators and professionals can have a quick browse through the details for their default organization by simply running this file. Note: Sometimes when you run this file, for first time, it might open in Notepad. In order to open this file with a PowerShell application, associate this file (with extension ps1) with C:\Windows\System32\WindowsPowerShell...Tmib Dreampad: Dream Pad is a smart text editor by Tmib Inc. Tags - Notepad , Texteditor , Note Pad , Dream Pad , Wordpad , Word Pad, TmibUAIFAI: Trabalho de EDUmbraco Dynamic Form: This project's aim is to provide a simple solution for creating dynamic forms in UmbracoVDOS - Top Link: H? th?ng tích di?m LinkCardVoteChecker: Vote Checker allows a canvasser to identify a valid Ballot by checking if the corresponding barcode is known to the election committee.WebRozklady: sWindows Application Monitoring and Administration Tool: This projects aims at developing client server architecture based windows application monitoring, administring and deployment. Also Most of the real life applications today are either windows services or Websites. WINADM suite aims at monitoring these and providing the user a graphical interface for interaction with these services.WPF 3 D: How to study wpf

  Read the article

• Conference networking for the socially awkward

  - by Melanie Townsend

  Do you approach a room full of strangers with excitement at all the new people you’re going to chat to over coffee and a muffin as you swap tales of how you convinced your manager to give you the day “off”? Or, do you find rooms full of strangers intimidating and begin by scouting out a place you can stand quietly and not be in someone’s way until the next session begins? If you’re on the train to extrovert city, that’s great, well done, move along. If, on the other hand, a room full of strangers who all seem to inexplicably know each other already is more challenge than opportunity, then making those connections with other professionals can be more difficult. So, here’s some advice, some gleaned from other things I’ve read online when trying to overcome my own discomfort in large groups (hopefully minus the infuriating condescension), others are just things I’ve found helpful over the years. Start small Smaller groups are less intimidating, and, now that you’ve taken the plunge to show up, it’s harder to remain inconspicuous. I find it’s easier to speak to new people once the option NOT to has been taken away. You’re there now, smile through the awkward and you’ll be forever grateful when the three people you’ve met and gotten to know here are also at that gigantic conference later on (ideally, introducing you to other people). Smile, or at the very least, stop scowling You probably don’t even know you’re doing it. If your resting face doesn’t come across as manically happy, tinge that with some social anxiety and you become one great ball of unapproachable. Normally, I wouldn’t suggest this as a problem that needs fixing, I have personally honed this face to use while travelling alone all the time. However, if you are indeed hoping to meet some useful people and get the most out of this conference, you may need to remind yourself to smile. Prepare some ice breakers This is going to sound stupid, like “no one does this right?” stupid, but, just, trust me a minute. It’s okay to prepare. You don’t need to write word-for-word questions to ask people and practice them in a mirror – that would be strange. I’m suggesting to just have an arsenal of questions to ask people if you get stuck, what session has been your favorite, which ones are you most looking forward to, have you heard X presenter speak before, what did you think of them? Even just thinking about these things in advance can help, and, as a bonus, while the other person is answering it gives you a moment to tamp down that panic, I mean breathe, I mean get to know them. You’re not alone (in the least creepy way possible) See that person in the corner clutching their phone with a mild deer in the headlights look?  That is potentially your new conference buddy. Starting with something along the lines of: I don’t know about you, the sessions here are great but I find the crowds a little tough to deal with. Mind if I park here for a second? is a decent opener. Just walking around and looking at exhibitors (if applicable) is fine, but it’s a little too easy to wander about and not actually speak to anyone if that’s all you’re doing. If joining a group of people talking is too much to start with, one-on-one can be easier. Have goals Are there people in particular you wanted to speak to? Did you have a personal goal of speaking to at least “x” new people? Are you trying to get a contact in a specific company because you want to work with them on something? Does the business have vague goals as well that you may or may not be judged on later? Making specific goals you can accomplish lets you know whether you’ve actually succeeded in your “networking pursuits” or what you need to work on more for next time. Everyone’s got their own coping technique. Some people are able to remind themselves that “humans are fundamentally social creatures” and somehow that helps them, others drink which is not really something I recommend for professional conferences but to each their own, and some focus on the fact that networking can play a big role in their career path. Just do what works for you, and if there’re any tricks you’ve found helpful over the years, please share em.

  Read the article

• Announcing the Winnipeg VS.NET 2012 Community Launch Event!

  - by D'Arcy Lussier

  Back in May 2010 the local Winnipeg technical community got together and put on a launch event for VS.NET 2010. That event was such a good time that we’re doing it again this year for the VS.NET 2012 launch! On December 6th, the Winnipeg .NET User Group is hosting a full day VS.NET 2012 Community Launch Event at the Imax theatre in Portage Place! We have 4 sessions planned covering dev tools, ALM/TFS, web development, and cloud development, presented by Dylan Smith, Tyler Doerksen, and myself. You can get all the details and register on our Eventbrite site: http://wpgvsnet2012launch.eventbrite.ca/ I’ve included the details below as well for convenience: Winnipeg VS.NET 2012 Community Launch Event Join us for a full day of sessions highlighting the new features and capabilities of Visual Studio .NET 2012 and the .NET 4.5 Framework! Hosted by the Winnipeg .NET User Group, this community event is FREE thanks to the generous support from our event sponsors: Imaginet Online Business Systems Prairie Developer Conference Event Details When: Thursday, Decemer 6th from 8:00 AM - 4:00 PM Where: IMAX Theatre, Portage Place Cost: *FREE!* Agenda 8:00 - 9:00 Continental Breakfast and Registration 9:00 - 9:15 Welcome 9:15 - 10:30 End-To-End Application Lifecycle Management with TFS 2012 10:30 - 10:45 Break 10:45 - 12:00 Improving Developer Productivity with Visual Studio 2012 12:00 - 1:00 Lunch Break (Lunch Not Provided) 1:00 - 2:15 Web Development in Visual Studio 2012 and .NET 4.5 2:15 - 2:30  Break 2:30 - 3:45 Microsoft Cloud Development with Azure and Visual Studio 2012 3:45 - 4:00 Prizes and Thanks Session Abstracts End-To-End Application Lifecycle Management with TFS 2012 Dylan Smith, Imaginet In this session we'll walk through the application development lifecycle from end-to-end and see how some of the new capabilities in TFS 2012 help streamline the software delivery process. There are some exciting new capabilities around Agile Project Management, Gathering Feedback, Code Reviews, Unit Testing, Version Control, Storyboarding, etc. During this session we’ll follow a fictional software development team through the process of planning, developing, testing, and deployment focusing on where the new functionality in VS/TFS 2012 fits in to make teams more effective. Improving Developer Productivity with Visual Studio 2012 Dylan Smith, Imaginet Microsoft Visual Studio 2012 enables developers to take full advantage of the capability of Windows using the skills and technologies developers already know and love to deliver exceptional and compelling apps.  Whether working individually or in a small, medium or large development team Visual Studio 2012 sets a new standard for development tools, helping teams deliver superior results for their customers that help set them apart from their competitors.  In this session we’ll walk through new features in Visual Studio 2012 specifically focusing on how these improve Developer Productivity. Web Development in Visual Studio 2012 and .NET 4.5 D’Arcy Lussier, Online Business Systems It’s an exciting time to be a web developer in the Microsoft ecosystem! The launch of Visual Studio 2012 and .NET 4.5 brings new tooling and features, and the ASP.NET team is continually releasing updates for MVC, SignalR, Web API, and other platform features. In this session we’ll take a tour of the new features and technologies available for Microsoft web developers here in 2012! Microsoft Cloud Development with Azure and Visual Studio 2012 Tyler Doerksen, Imaginet Microsoft’s public cloud platform is nearing its third year of public availability, supporting web site/service hosting, storage, relational databases, virtual machines, virtual networks and much more. Windows Azure provides both power and flexibility.  But to capture this power you need to have the right tools!  This session will demonstrate the primary ways you can harness Windows Azure with the .NET platform.  We’ll explain cloud service development, packaging, deployment, testing and show how Visual Studio 2012 with the Windows Azure SDK and other Microsoft tools can be used to develop for and manage Windows Azure.Harness the power of the cloud from the comfort of Visual Studio 2012!

  Read the article

• Windows Azure SDK 1.3 addresses early adopter feedback

  - by Eric Nelson

  At the end of November 2010 we released a new version of the Windows Azure SDK which contains many new features driven by the great feedback of early adopters plus a shiny new portal. New Portal implemented in Silverlight: The new portal is implemented using Silverlight and replaces the (IMHO rather clunky) original HTML + JavaScript portal. It is 100% better although does still have a few bugs. Enjoy! P.S. You can if you wish still use the old portal:   New runtime functionality: The following functionality is now generally available through the Windows Azure SDK and Windows Azure Tools for Visual Studio and the new Windows Azure Management Portal: Elevated Privileges and Full IIS. You can now run a portion or all of your code in Web and Worker roles with elevated administrator privileges. The Web role now provides Full IIS functionality, which enables multiple IIS sites per Web role and the ability to install IIS modules. Remote Desktop functionality enables you to connect to a running instance of your application or service in order to monitor activity and troubleshoot common problems. Windows Server 2008 R2 Roles: Windows Azure now supports Windows Server 2008 R2 in its Web, worker and VM roles. This new support enables you to take advantage of the full range of Windows Server 2008 R2 features such as IIS 7.5, AppLocker, and enhanced command-line and automated management using PowerShell Version 2.0. New runtime functionality – in beta: Windows Azure Virtual Machine Role: Support for more types of new and existing Windows applications will soon be available with the introduction of the Virtual Machine (VM) role. You can move more existing applications to Windows Azure, reducing the need to make costly code or deployment changes. Extra Small Windows Azure Instance, which is priced at $0.05 per compute hour, provides developers with a cost-effective training and development environment. Developers can also use the Extra Small instance to prototype cloud solutions at a lower cost. Windows Azure Connect: (formerly Project Sydney), which enables a simple and easy-to-manage mechanism to set up IP-based network connectivity between on-premises and Windows Azure resources, is the first Windows Azure Virtual Network feature that we’re making available as a CTP. You can sign up for any of the betas via the Windows Azure Management Portal. Improved processes and simplified operations New portal! (see above) Access to new diagnostic information including the ability to click on a role to see role type, deployment time and last reboot time A new sign-up process that dramatically reduces the number of steps needed to sign up for Windows Azure. New scenario based Windows Azure Platform forums to help answer questions and share knowledge more efficiently. Multiple Service Administrators: Windows Azure now supports multiple Windows Live IDs to have administrator privileges on the same Windows Azure account. The objective is to make it easy for a team to work on the same Windows Azure account while using their individual Windows Live IDs.   Related Links Please also let us know through Microsoft Platform Ready if and when you intend to build an application using the Windows Azure Platform. Or indeed if you already have (Well done). You will get access to some great benefits if you do (more on that in a future post). It also really helps us better understand the demand out there which directly impacts how we will plan the next six months of activities around the Windows Azure Platform. Visit Microsoft Platform Ready to tell us about your plans for your applications UK based? Interested in the Windows Azure Platform? Join http://ukazure.ning.com Get started with the Windows Azure Platform http://bit.ly/startazure

  Read the article

• Elo system behaves oddly in program I've created

  - by adc

  Alright, so I'm looking to build a small program (C# and XAML) that, essentially, does this: Generate array of players. Each player has a current rating and a true rating. I set current rating to 1200 as a starting point right now; I've also tried setting it to true rating and the average of the two. True rating is what their skill level actually is. Their true rating is calculated based on percentages from the current League of Legends rating system; generating an array of 970 thousand generates results very similar to the data from here: (removed due to URL limit - but trust me, the results are very similar). This array is of length specified by the user. If need be, sort the array from smallest to largest. Play X number of games, again specified by the user. This is done by taking the array of players (which is sorted by Current Rating after being created) and running through it in groups of 10. The first five are on team one, the second five are on team two. It then takes the True Rating of these players and calculates an expected chance to win using the Elo system. It generates a random double and compares it to the expected chance to win; if the number is lower, team one wins - otherwise team two wins. I then update the rating of the players via, again, the Elo system - giving the winning team a score of 1 and the losing team a score of 0. I use a K value of 36 (but have tried 12, 24, and even higher ones) and an F value of 400. After going through the entire loop of players (which I have conveniently forced to be a multiple of ten), it sorts the array - again via current rating. This, if my understanding of the Elo system is correct, runs properly. However, it doesn't seem to work. I have a running test telling me how many players of the full array are within 100 current rating of their true rating. I would expect some portion of the population to be outside this range (as probability is not always going to go in their favor), but a full 40-45% of the population is outside of this range. I also have it outputting the maximum difference between true and current rating - and I have never seen this drop below 500! It hovers between 550-600, occasionally going over or under. I'm at a loss as to what to change - I've fiddled with the K and F values, where I start all the players, etc. but nothing changes the fact that eventually a good 40% of the population is outside the range. And it isn't that I have it playing too few games - it's now run through over 60 thousand games and the problem never disappears or really fluctuates. The full C# code, including everything except the XAML file and the Player class (pastebin is being very slow and I can only post two links, so I can't link to the XAML file): http://pastebin.com/rFcZRL84 The Player class: http://pastebin.com/4cJTdTRu I guess my question is did I do anything wrong? Is there a problem with the way I implemented the system, or is it just that Riot uses a significantly modified Elo system? I don't think it's the latter, as that still wouldn't explain the massive true and current rating differences to me, however.

  Read the article

• Visual Studio: Add Item / Add as link rather than just Add

  - by Pete d'Oronzio

  I'm new to visual studio, coming from Delphi. I have a directory tree full of .cs files (root is \Common). I also have a directory tree full of Applications (root is \Applications) Finally, I've got a tree full of Assemblies (root is \Assemblies) I'd like to keep my .cs files in the Common tree and all the environment voodoo (solutions, projects, settings, metadata, debug data, bin, etc.) in the Assmblies tree. So, for a simple example, I've got an assembly called PdMagic.Common.Math.dll. The Solution and project is located in \Assemblies\Common\Math. All of its source (.cs) files are in \Common\Math. (matrix.cs, trig.cs, mathtypes.cs, mathfuncs.cs, stats.cs, etc.) When I use Add Existing Item to add matrix.cs to my project, a copy of it is added to the \Assemblies\Common\Math folder. I just want to reference it. I don't want multiple copies laying around. I've tried Add Existing Item, and used the drop down to "Add link" rather than just "Add", and that seems to do what I want. Question: What is the "best practice" for this sort of thing? Do most people just put those .cs files all in the same folder as the project? Why isn't "Add link" the default? Thanks!

  Read the article

• Trouble Deploying .Net Framework 4 Website on IIS7

  - by Cyril Gupta

  Okay, I am trying to deploy a .Net framework 4 website on IIS7 server. I have already changed the application-pool's target framework to .Net 4, but the app is still showing me the error: "The configuration section 'system.web.extensions' cannot be read because it is missing a section declaration" I am guessing that has something to do with the new feature of .Net4 that lets me have a compact Web config file. I think for some reason IIS7 is not happy with this. What can I do to deploy this app successfully or do I have to scale back to v3.5? I am sure there is a solution out there. Do you have any suggestions?

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >