Search Results

Search found 16836 results on 674 pages for 'power management'.

Page 80/674 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• Gaming blew fuse and causes funny smell: how to overcome?

  - by George Tomlinson

  I've been gaming for a while now. When playing certain games this PC goes into overdrive. The fan/fans start/s to sound like a jet engine it/they get/s so busy. Also I have smelt burning when this has happened. The fuse blew on the 4 socket adapter I was using recently. On the following thread someone said this could be due to the PSU not being strong enough to handle the load, in what it seems could be a related issue someone had, although the person who posted this question did say that blowing a fan on their PC stopped it crashing in that case: http://www.tomshardware.co.uk/answers/id-2047543/gtx-650-overheating-issue.html. This is exactly what they said: Your GPU isn't overheating. 70+ before it would shutdown and cause a restart. Make sure your PSU is strong enough to handle your new system at load and possibly run Memtest to check your RAM (although not BSOD'ing and just shutting down points to the PSU). This (the PSU part) makes more sense to me than it being to do with dust etc, since it seems a more plausible explanation of why the fuse blew. The PC has no problems except when playing certain games: i.e. TERA Rising and WoW with add-ons (I think WoW is ok as long as I don't have more than 1 add-on (Healers Have To Die)). I'm just wondering if anyone knows or can suggest what I might be able to do to be able to play these games without this problem occurring. The PC's spec is this: Display: NVIDIA GeForce GTX 650 8GB RAM (6 available) Processor: AMD FX (tm) - 8120 Eight-Core Processor - 3.1 GHz, 4 Cores, 8 Logical Processors I have read on another post that forcing vsync in the Nvidia Control Panel helped with what seems could be a similar problem, so I plan to see if that solves it, God permitting. EDIT: I tried the Vsync thing, and it seems the situation may have improved, although this may be due to something else: i.e. maybe the PC was working harder yesterday, due to just having downloaded a few things or lots of things running. I'm still noticing the funny smell when playing TERA. It's not so much burning: it's more like glue. The smell might have had a burning element to it in the past, but I think it's always had a glue element. EDIT 2: the PSU is an 'ATX Switching Power Supply', Model E-500ATX. Other info it gives on the PSU is 230V, Current 10A and Frequency 50-60Hz. It also has some other info which I can supply if necessary. Putting the PC plug in the wall socket instead of the power strip seems like it might have reduced the load on the PC quite a bit: I think it sounds less stressed. it has been off for a while whilst I took the side panel off though, so I'll wait to see what happens before getting too excited. EDIT 3: hmm. So here's the latest: just playing TERA. The fan's running quite fast again. Hard to tell whether switching to the wall socket has made a difference in terms of strain on the PC: I don't know if one would expect it to. Still seems like it might have helped though. Oh and there didn't seem to be much dust in the PC, although I didn't disconnect any components. I'm still getting the glue type smell. ASIDE: reminds me of someone on a PC near me at the library once who was actually sniffing glue right there in front of everyone while on the PC and he started talking about how he was sniffing glue. lol. That's no joke. EDIT 4: So the questions now are: Question 1: Is the smell something I should sort out? (If so, how might I do this?) Question 2: is it necessary to take any steps to prevent blowing another fuse (and if so which step/s?).

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Web based KVM management for Ubuntu

  - by Tim

  Hey all, We've got a single Ubuntu 9.10 root server on which we want to run multiple KVM virtual machines. To administer these virtual machines I'd like a web based KVM management tool, but I don't know which one to choose from the list of tools mentioned on linux-kvm.org. I've used virsh & virt-manager on my desktop, but would like a web interface for the server. I tested ConVirt on my desktop, but it failed to pickup KVM machines from virsh / virt-manager, and I could not get KVM virtual machine import to work (only Xen). oVirt looks good, but I can't find out if and how I can install it on Ubuntu 9.10.. (And I'd really rather not waste another few days on testing stuff that might not work in the end.) Can anyone recommend any good web based KVM management tools that are easy to install on Ubuntu 9.10? I'm looking for something that will also allow me to run other services like apache and postgresql besides hosting virtual machines, so preferably fairly lightweight & no dedicated OS installs. We don't need any professional clustering / migration or anything, just something that will let us create, start, inspect, administer & stop virtual machines from a web page. Best regards, Tim

  Read the article

• MSSQL Server Management Studio Express 2005 license limit error should not be displayed

  - by Erik Vold

  I just tried restoring a 250MB database from a backup on my local machine, and got the following message: TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Restore failed for Server 'MULTIVIS-A0D9F3\SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: System.Data.SqlClient.SqlError: CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 4096 MB per database. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ I had 3 db's on the machine, one ~4.1gb db and two other dbs < 10mb each. So I did some googling on this error and saw the suggestion to try shrinking my other dbs to free up some space. So I did so on the 4.1gb db and now when I go to 'properties' for that db it says it is taking/using ~2.4gb. So I should have space now I figure, but whenever I try to restore the ~250mb database now I still get the error message above.. I tried restarting as well but that wasn't helpful. Any idea what the issue is?

  Read the article

• Can't Connect w/ SQL Management Studio After Domain Change

  - by Sam

  Our old Small Business Server 2003 (acting as our domain controller) was on the fritz, so we replaced it with a new Windows Server 2008 box and set the server up as our new domain controller. In hindsight, it may have been a mistake, but we set up the new server as a replacement and tried to keep as much the same as possible, including the DOMAIN name. The problem was, that even though the domain name was the same, the guest computers somehow still realized it was not the exact same domain. We had to unjoin and rejoin the domain and port over everyone's documents and settings. This morning, when I attempted to connect to my local SQL Server Instance, it was saying that my login failed. When I tried to use the SQL Management Studio, it throws the error "Package 'Microsoft SQL Management Studio Package' failed to load" on startup, then exits without giving me a chance to change the login. I am using Mixed Authentication and have an administrative account as a backup. Ideas? If there is a more appropriate stack, please let me know where to put it.

  Read the article

• Memory management with Objective-C Distributed Objects: my temporary instances live forever!

  - by jkp

  I'm playing with Objective-C Distributed Objects and I'm having some problems understanding how memory management works under the system. The example given below illustrates my problem: Protocol.h #import <Foundation/Foundation.h> @protocol DOServer - (byref id)createTarget; @end Server.m #import <Foundation/Foundation.h> #import "Protocol.h" @interface DOTarget : NSObject @end @interface DOServer : NSObject < DOServer > @end @implementation DOTarget - (id)init { if ((self = [super init])) { NSLog(@"Target created"); } return self; } - (void)dealloc { NSLog(@"Target destroyed"); [super dealloc]; } @end @implementation DOServer - (byref id)createTarget { return [[[DOTarget alloc] init] autorelease]; } @end int main() { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; DOServer *server = [[DOServer alloc] init]; NSConnection *connection = [[NSConnection new] autorelease]; [connection setRootObject:server]; if ([connection registerName:@"test-server"] == NO) { NSLog(@"Failed to vend server object"); } else [[NSRunLoop currentRunLoop] run]; [pool drain]; return 0; } Client.m #import <Foundation/Foundation.h> #import "Protocol.h" int main() { unsigned i = 0; for (; i < 3; i ++) { NSAutoreleasePool *pool = [[NSAutoreleasePool alloc] init]; id server = [NSConnection rootProxyForConnectionWithRegisteredName:@"test-server" host:nil]; [server setProtocolForProxy:@protocol(DOServer)]; NSLog(@"Created target: %@", [server createTarget]); [[NSRunLoop currentRunLoop] runUntilDate:[NSDate dateWithTimeIntervalSinceNow:1.0]]; [pool drain]; } return 0; } The issue is that any remote objects created by the root proxy are not released when their proxy counterparts in the client go out of scope. According to the documentation: When an object’s remote proxy is deallocated, a message is sent back to the receiver to notify it that the local object is no longer shared over the connection. I would therefore expect that as each DOTarget goes out of scope (each time around the loop) it's remote counterpart would be dellocated, since there is no other reference to it being held on the remote side of the connection. In reality this does not happen: the temporary objects are only deallocate when the client application quits, or more accurately, when the connection is invalidated. I can force the temporary objects on the remote side to be deallocated by explicitly invalidating the NSConnection object I'm using each time around the loop and creating a new one but somehow this just feels wrong. Is this the correct behaviour from DO? Should all temporary objects live as long as the connection that created them? Are connections therefore to be treated as temporary objects which should be opened and closed with each series of requests against the server? Any insights would be appreciated.

  Read the article

• What is the difference between a PDU and a power strip (both 120V, 15A)?

  - by rob

  I just chatted with an APC rep about upgrading the UPSes at our office. She recommended a single higher-capacity 6-outlet Smart-UPS to replace the four Back-UPS units we currently have. When I asked how she recommended plugging in all the current devices, she recommended using a APC's AP9567 PDU, but said not to use a power strip. At first she said I had to use an APC brand PDU, but after I inquired about using a Tripp-Lite PDU, she said any brand PDU would be fine. The APC PDU previously referenced looks like a standard 120V power strip with overload protection but no surge protection. Other than overload protection (which seems redundant if plugging into the UPS), is there something else I'm missing, or should any power strip (without surge protection) be fine? Edit: I didn't mention it earlier, but we don't have a proper rack--though I did still plan to mount the PDU or power strip to something. I guess I'm wondering if there's any special reason I should pay as much as $180 for the low-end APC PDU (which just looks like a power strip to me) vs. $20-$30 for a workbench power strip.

  Read the article

• Looking for issue tracker software for residential property management

  - by Rob

  This question is about a computer software (as per SU guidelines) application for centrally tracking issues concerning the management of a residental block of flats (apartments as they say in the US and France). Issues are incidents - and their resultant unplanned maintenance to address them, also planned one-off maintenance and also regular planned routine maintenance. I live in a block of flats (apartments), and along with other residents, are looking to more closely watch over issues with the communal, shared areas of the premises (corridors, courtyards, stairs, lifts, lights, trash/bin shed, bike stands, parking areas etc) and their maintenance, currently done by a property management company. Our own homes are our own affair internally, its the outside communal areas that I have the interest. The aim being to control costs and possibly reduce them, by proactively managing the property using historical data to predict issues and also to scrutinise maintenance charges against such data to ensure that the costs are as expected. Trending could also be established whereby recurrences of things can be detected and pre-empted to reduce costs. As a software professional, I'm aware of Bugzilla, eventum being free tools for software - which could be customised to fit this application, but wondered if there was something more appropriate. It might be useful for such software to be on a web server, with secure access, so that residents can log in and view the issues.

  Read the article

• RabbitMQ Management console not working

  - by rrejc

  I have started with RabbitMQ. I have a (windows) machine on which I installed two RabbitMQ nodes as a service - I have choose the nodename, port and service name for each of them. The services are running normally (i see that they are listening in a netstat-a). I have also installed management plugin with "rabbitmq-plugins enable rabbitmq_management" and restarted both services. But the plugin isn't running - I dont see it listening in a netstat and I can't connect to the management console via browser. Any idea what could be wrong? Is there any log to see what is goind on? Updated: when I do rabbitmq-plugins list i get: c:\RabbitMq\sbin>rabbitmq-plugins list [e] amqp_client 3.0.1 [ ] cowboy 0.5.0-rmq3.0.1-git4b93c2d [ ] eldap 3.0.1-gite309de4 [e] mochiweb 2.3.1-rmq3.0.1-gitd541e9a [ ] rabbitmq_auth_backend_ldap 3.0.1 [ ] rabbitmq_auth_mechanism_ssl 3.0.1 [ ] rabbitmq_consistent_hash_exchange 3.0.1 [ ] rabbitmq_federation 3.0.1 [ ] rabbitmq_federation_management 3.0.1 [ ] rabbitmq_jsonrpc 3.0.1 [ ] rabbitmq_jsonrpc_channel 3.0.1 [ ] rabbitmq_jsonrpc_channel_examples 3.0.1 [E] rabbitmq_management 3.0.1 [e] rabbitmq_management_agent 3.0.1 [ ] rabbitmq_management_visualiser 3.0.1 [e] rabbitmq_mochiweb 3.0.1 [ ] rabbitmq_mqtt 3.0.1 [ ] rabbitmq_old_federation 3.0.1 [ ] rabbitmq_shovel 3.0.1 [ ] rabbitmq_shovel_management 3.0.1 [ ] rabbitmq_stomp 3.0.1 [ ] rabbitmq_tracing 3.0.1 [ ] rabbitmq_web_stomp 3.0.1 [ ] rabbitmq_web_stomp_examples 3.0.1 [ ] rfc4627_jsonrpc 3.0.1-git7ab174b [ ] sockjs 0.3.3-rmq3.0.1-git92d4ba4 [e] webmachine 1.9.1-rmq3.0.1-git52e62bc

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• E-Business Suite Certified with DB 11.2.0.2 on HP-UX Itanium and IBM AIX on Power

  - by Steven Chan

  As a follow-on to our previous certification announcement, Oracle Database 11g Release 2 (11.2.0.2) s now certified with Oracle E-Business Suite Release 12 (12.0.x and 12.1.x) and 11i (11.5.10.2 + ATG PF.H RUP 6 and higher) on the following additional platforms:Oracle E-Business Suite Release 12HP-UX Itanium (11.31) IBM AIX on Power Systems (64-bit) (5.3, 6.1) Oracle E-Business Suite Release 11iIBM AIX on Power Systems (64-bit) (5.3, 6.1)

  Read the article

• Cheap dvr media server

  - by Tester101

  I would like to build a new computer to be used as a DVR and media server. I am thinking of using mythtv as the DVR software, but short of that decision I am completely open to suggestions. Requirements: Must be cheap. Must have low power consumption (since it will always be on). Should be quiet. Should be small. I'm really not sure where to start with this project, and am open to any hardware/software suggestions. Is it possible to build a small quiet and cheap system? *Keep in mind I am working on this project because I am tired of Cable rate increases, but I can't imagine living without a DVR so cost is very important and I would like the system to be sub $200.00. The system also needs to handle the new digital broadcast system. Thanks for the help,

  Read the article

• LCD monitor flickering

  - by stickmangumby

  I've recently got an LCD monitor and it is occasionally 'flickering' colors very noticeably. It's not a new monitor, but the person I'm borrowing it from hasn't had any trouble with it. The flickering occurs across operating systems and screen resolutions. I'm pretty sure it's related to dirty power - it often happens when fluorescent lights get turned on or the fridge starts, but not always. Is this likely to be the cause of the problem? Is there any good way to test this? Is there anything that can be done about bad grounding?

  Read the article

• Gateway SX2300-01u CPU/PSU issues

  - by Vlad

  I have a 2-yr-old Gateway SX2300-01u with an AMD Phenom X3 8550 that I feel has about a year or so of life left, but I am having a couple of hardware issues that I have not been able to resolve. First, the power supply fan sounds like much louder than before and the PSU itself is really hot. The PSU model (Liteon PS 5221-06) is not available at a reasonable price; are there any good alternatives? Could I replace just the PSU fan? Also, the CPU fan failed sometime back, but my replacement, which supposedly fits the MB (Socket AM2+) doesn't actually fit properly. Any idea why?

  Read the article

• LSI RAID-on-chip with RAID6 over two SAS links goes red when HDD enclosure is powered cycled; how to recover?

  - by GregC

  I have a RAID6 array managed by LSI 9286-8e card. I also have Sans Digital 24-bay NexentaSTOR JBOD enclosure with SAS extender built-in. They are connected to separate UPS devices. Normally, I'd shut down the PC, leaving RAID6 in healthy state. But today the power to JBOD enclosure was cut but PC kept running. After restarting the PC, all disks in RAID6 have lit up RED, and the only option in LSI MegaRAID manager app was to reset each disk to unassigned, thereby loosing all data on RAID6 array. Thankfully, I am only testing, but how would I recover if this were to happen in production?

  Read the article

• PSU requirement question for my PC setup.

  - by user69474

  I understand that sometimes there may be a situation where the PSU is way more than required but in this case of mine, I'm not too sure. Sometimes when I play games, my computer will crash and restarts itself, 10 mins into the game. Once I received a message that says something like the power is overheating or something like that. Ok, so I have a 500W PSU. I have: 1x Internal DVD writer 1x SATA 250GB HD 1x Nvidia 8500 GT 2GB RAM. As I'm planning to get an additional 250GB SATA HD, I wonder if I need to increase my PSU as well -- in full knowledge of the previous crashes experienced before. Should I upgrade my PSU to 650W perhaps, or is that excessive?

  Read the article

• What is polarity for an unmarked USB hub?

  - by Feral Oink

  On my USB hub where the power supply plugs in, the polarity is unmarked (I got it used, from my brother's friend). I need to know what the polarity should be. I don't think it makes a difference about the brand. Could someone who has a USB hub tell me what the polarity markings are? This is why I need to know about the polarity: Usually the center pin is positive and the outer pin is negative. But I'm not sure with this, and want to be certain before I plug anything into it.

  Read the article

• Why would only the cpu fan not spin and no video displayed?

  - by Patrick

  I just built a new computer and when I first powered it on I got a continuous beeping which according to the manual means a power failure. After moving the voltage switch to the left a little I was able to get the beeping to stop. Even after the stopping though the CPU fan doesn't spin, and there is no display on the monitor. All the other fans and lights come on in the computer though, the DVD drive is working and ejects the tray, and the hard drive sounds like it spins up. Has anyone seen this before and know what is wrong or what has failed?

  Read the article

• powertop keeps telling me to turn off the same thing, over and over

  - by Rory McCann

  I am running an ubuntu lucid laptop on battery. I want to make my power last as long as possible. Aswell as the normal things like turn down screen brightness, and turn off wifi, I'm using powertop. It will sometimes tell me things, e.g.: Suggestion: Enable USB autosuspend by pressing the U key OK, I press the U key to do that. However a few minutes later it will give me the same suggestion, it's as if it never enabled USB autosuspend the first time. It does this for other things aswell, not just USB autosuspend. e.g. it'll give me this message frequently: An audio device is active 100.0% of the time: hwC0D1 LSI ID 1040 Q - Quit R - Refresh A - Turn HD audio powersave on Is there anything I can do to make these choices 'stick'? Or do I have some unfortunatle hardware that won't obey linux? (If so, is there any way to confirm this?)

  Read the article

• How tot track which program causes my harddrive to spin up

  - by Andreas

  I have a strange problem: Every half hour one of my hard disks gets powered on again. I recognize this by the sound of a hard disk spinning up. So far I was not able to track which program could cause this. I ran Process Monitor to see whether there is an I/O peak coinciding with the spin-up. I checked Windows event viewer if there is an appropriate event at the same time Any ideas other than the usual disabling-services/programs etc. (which would be my next investigation step)? Also, it would be helpful to have a program that shows the current power status of all my drives, if there is one. Harddisk Sentinel unfortunately cannot do the job because it powers on all drives upon start and prevents their going into sleep mode. Thanks in advance. :)

  Read the article

• How have you saved green by going green?

  - by Bob

  For the purpose of this question, I am interested in server/datacenter related hardware. Have you had any measureable amount of ROI by swapping existing hardware to more "green" or energy efficient hardware? For example, VMWare says you can reduce energy consumption by up to 80% by using virtualization. I have also heard of a cooling solution from HP which is suppose to reduce a small amount of engery usage (<25% I think). Google has also done something by integrating a UPS into their power supplies to reduce energy consumption. Any real world experiences would be great, but if you have any details on initial cost, savings and pay off time about what changes were make that would fantastic. I am not only interested in virtualization, I am interested in anything.

  Read the article

• Is it possible (and safe/reliable/non-damaging) to use a 20-pin ATX PSU with a 24-pin ATX motherboar

  - by Legooolas

  I have a reasonably-decent old 20-pin PSU which I want to use on a newer 24-pin ATX motherboard. I see that the ATX page on wikipedia mentions that 24-pin ATX is backward-compatible, and I can find 20-to-24 pin adapters to buy for a couple of dollars/pounds at lots of places, but I can't find any mention of restrictions on the use of these. Will this work on any motherboard, or is it a per-motherboard compatibility question? Are there any other restrictions like the level of power available (and hence the additional 4 pins with +12, +5 and +3.3V lines which are already on other pins)?

  Read the article

• Can I replace a broken PSU with one of a smaller size?

  - by Carson Myers

  I have a broken OEM power supply unit that is cooked. I'm browsing online to find a replacement and am happy to see that they don't cost too much -- the only thing is they all seem to have varying sizes. Is it a problem if I get a PSU that is smaller than the original one? This is going in an HP Pavillion a000, it's about five and a half years old -- I don't know if that means anything, I just thought there might be some recent standardized dimensions for PSUs or something. No idea.

  Read the article

• Hot video card in server

  - by DougN

  Not sure if this belongs here or Superuser (I looked at Superuser -- suspect there are more hardware gurus here). I have a server that sits in a cabinet. It's connected to a small screen that is normally off. However, the video card is running at about 210 F all the time. The rest of the PC is pretty cool (getting temps from SpeedFan). Any thoughts on a way to quiet/calm/cool the video card since it's never really doing anything anyway? I'm usually logged out on the server, and no screen saver defined. Windows is already set to turn off the screen for power saving at 5 minutes.

  Read the article

• Motherboard/PSU crippling USB and Sata

  - by celebdor

  I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >