Search Results

Search found 3701 results on 149 pages for 'cost threshold for parall'.

Page 81/149 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• NVRAM for journals on Linux?

  - by symcbean

  I've been thinking about ways of speeding up disk I/O, and one of the bottlenecks I keep coming back to is the journal. There's an obvious benefit to using an SSD for the journal - over and above just write caching unless of course I just disable the journal with the write cache (after all devicemapper doesn't seem to support barriers). In order to get the benefits from using a BB write cache on the controller, then I'd need to disable journalling - but then the OS should try to fsck the system after an outage. Of course if the OS knows what's in the batter-backed memory then it could use it as the journal - but that means it must be exposed as a block device and only be under the control of the operating system. However I've not been able to find a suitable low-cost device (no, write-levelling for Flash is not adequate for a journal, at least one which uses Smartmedia). While there's no end of flash devices, disk/array controllers with BB write caches, so far I've not found anything which just gives me non-volatile memory addressable as a block storage device.

  Read the article

• Zero-channel RAID for High Performance MySQL Server (IBM ServeRAID 8k) : Any Experience/Recommendation?

  - by prs563

  We are getting this IBM rack mount server and it has this IBM ServeRAID8k storage controller with Zero-Channel RAID and 256MB battery backed cache. It can support RAID 10 which we need for our high performance MySQL server which will have 4 x 15000K RPM 300GB SAS HDD. This is mission-critical and we want as much bandwidth and performance. Is this a good card or should we replace with another IBM RAID card? IBM ServeRAID 8k SAS Controller option provides 256 MB of battery backed 533 MHz DDR2 standard power memory in a fixed mounting arrangement. The device attaches directly to IBM planar which can provide full RAID capability. Manufacturer IBM Manufacturer Part # 25R8064 Cost Central Item # 10025907 Product Description IBM ServeRAID 8k SAS - Storage controller (zero-channel RAID) - RAID 0, 1, 5, 6, 10, 1E Device Type Storage controller (zero-channel RAID) - plug-in module Buffer Size 256 MB Supported Devices Disk array (RAID) Max Storage Devices Qty 8 RAID Level RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 1E Manufacturer Warranty 1 year warranty

  Read the article

• Which network performance management software do you use?

  - by Jamie Keeling

  Hello, I am looking at the various options available for network performance management software, some of the solutions I've found so far are: Proprietary: HP - ProCurve Universal: SolarWinds - Orion Open Source: OpenNMS I am trying to discover the benefits of each package over the other and reasons as to why you would go for one (Such as size of the network, overall cost etc..). I'm curious as to which ones other people use and why? Each customer has their own needs and requirements and it would be great to hear some of yours. Thank you for your time.

  Read the article

• Cheap batteries for old laptop

  - by Jeremy French

  I have an old laptop with a kaput battery. I have looked at this question with regards to spares, but most of the sites that are linked too from there have batteries which probably cost more than the laptop is worth. I like keeping the laptop around as a spare, but find it fustrating that it has to be plugged in permanantly. It seems to be that a half good battery would be acceptable for me, for a knock down price. However nothing of the sort seems to exsist. Is there any way to get cheep batteries in such a case? Laptop is a Compaq Presario 900 if that information helps

  Read the article

• How to increase the disk cache of Windows 7

  - by Mark Christiaens

  Under Windows 7 (64 bit), I'm reading through 9000 moderately sized files. In total, there is more than 200 MB of data. Using Java (JDK 1.6.21) I'm iterating over the files. The first 1400 or so go at full speed but then speed drops off to 4ms per file. It turns out that the main cost is incurred simply by opening the files. I'm opening the files using new FileInputStream (and of course closing them in time to avoid file leaks). After some investigating, I see that Windows' disk cache is using only 100 MB or so of RAM although I have 8 GiB available. I've tried increasing the cache size using the CacheSet tool but any values I provide are considered out of range. I've also tried enabling the LargeSystemCache registry key but (after rebooting) the CacheSet tool still indicates I'm using 100 MB of cache (and doesn't increase during the test run). Does anybody have any suggestions to "encourage" Windows 7 to cache my 9000 files?

  Read the article

• Elastic Load Balancer & SSL termination

  - by Aaron Scruggs

  I am setting up a Rails app on AWS that: 1) all traffic must ssl encrypted 2) will highly fluctuate in traffic on a weekly basis 3) will by maintained by someone that is a stronger coder than sysadmin, but will be responsible for both I am thinking that SSL termination on an elastic load balancer backed by small ec2 instances running nginx and unicorn A small subset of the requests will take longer than 10s, because of this I am also debating using 'thin' instead of 'unicorn'. My question is this: Is this sane? I am stepping into a quagmire of cost, maintainability, security or performance problems?

  Read the article

• Parameters for selection of Operating system, memory and processor for embedded system ?

  - by James

  I am developing an embedded real time system software (in C language). I have designed the s/w architecture - we know various objects required, interactions required between various objects and IPC communication between tasks. Based on this information, i need to decide on the operating system(RTOS), microprocessor and memory size requirements. (Most likely i would be using Quadros, as it has been suggested by the client based on their prior experience in similar projects) But i am confused about which one to begin with, since choice of one could impact the selection of other. Could you also guide me on parameters to consider to estimate the memory requirements from the s/w design (lower limit and upper limit of memory requirement) ? (Cost of the component(s) could be ignored for this evaluation)

  Read the article

• Serial: write() throttling?

  - by damian

  Hi everyone, I'm working on a project sending serial data to control animation of LED lights, which need to stay in sync with a sound engine. There seems to be a large serial write buffer (OSX (POSIX) + FTDI chipset usb serial device), so without manually restricting the transmission rate, the animation system can get several seconds ahead of the serial transmission. Currently I'm manually restricting the serial write speed to the baudrate (8N1 = 10 bytes serial frame per 8 bytes data, 19200 bps serial - 1920 bytes per second max), but I am having a problem with the sound drifting out of sync over time - it starts fine, but after 10 minutes there's a noticeable (100ms+) lag between the sound and the lights. This is the code that's restricting the serial write speed (called once per animation frame, 'elapsed' is the duration of the current frame, 'baudrate' is the bps (19200)): void BufferedSerial::update( float elapsed ) { baud_timer += elapsed; if ( bytes_written > 1024 ) { // maintain baudrate float time_should_have_taken = (float(bytes_written)*10)/float(baudrate); float time_actually_took = baud_timer; // sleep if we have > 20ms lag between serial transmit and our write calls if ( time_should_have_taken-time_actually_took > 0.02f ) { float sleep_time = time_should_have_taken - time_actually_took; int sleep_time_us = sleep_time*1000.0f*1000.0f; //printf("BufferedSerial::update sleeping %i ms\n", sleep_time_us/1000 ); delayUs( sleep_time_us ); // subtract 128 bytes bytes_written -= 128; // subtract the time it should have taken to write 128 bytes baud_timer -= (float(128)*10)/float(baudrate); } } } Clearly there's something wrong, somewhere. A much better approach would be to be able to determine the number of bytes currently in the transmit queue, and try and keep that below a fixed threshold. Any advice appreciated.

  Read the article

• SAN alternative for VMWare

  - by CogitoErgoSum

  Has anyone utilized something aside from a SAN to run their VMWare images off? We are looking to drop in two HP Servers and VMWare on them and run them off a SAN. Due to the cost of SAN though our CFO and VP are wondering if there are any viable alternatives (I.e. NAS) that can effectively run a VMWare. I can't think of any off of the top of my head. IF anyone can provide one or a good article outlining why to stick to SAN that'd be great.

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• Is there a SIP provider in the UK which provides the P-Asserted-Identity header?

  - by nbolton

  In the US, Flowroute (low cost SIP trunking provider) provides P-Asserted-Identity in the SIP invite request header (example screenshots). It also allows you to set the caller ID for outgoing calls, for example by using the follow in extensions.conf for Asterisk: exten => id,n,Set(CALLERID(all)=123) However, in the UK, I've tried a couple of SIP providers and none of them let me do either of those things (see P-Asserted-Identity or set the caller-ID). Is this because of some sort of restriction in the UK phone networks, or is it only available to really expensive SIP trunking providers?

  Read the article

• Full Backup & Restore for Windows Vista

  - by Thomas Matthews

  I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• Running a home mail server using dynamic dns [closed]

  - by Anand

  Hi, Is it possible to run an email server on my home box using dynamic dns? The scenario is, I want to auto cc all incoming and outgoing emails from my one account to another, from some server side config instead of configuring email clients for rules. I have tried Google Apps Mail but it doesn't allow auto cc of outgoing emails. After having read tons of blogs, forum messages etc (hope I have been reading the correct info :) ) the only option to achieve what I am needing is to setup my own mail server, but the cost of getting a static IP doesn't fit my budget. Please can someone point me in the correct direction. Platform doesn't matter, I can setup a Windows or Linux server. Many Thanks

  Read the article

• DNS failover across multiple datacenters?

  - by Jae Lee

  I've got a site that is starting to get a lot of traffic and just the other day, we had a network outage at the datacenter where our loadbalancer (haproxy) is hosted at. This worried me as despite all my efforts of making the system fully redundant, I still could not make our DNS redundant, which I think isn't an easy solution. Only thing I was able to find was to sign up for DNS failover from places like dnsme, etc .... but they cost too much for budding startups. Even their Corporate plan only gives you 50 million queries per month and we use that up in a week. So my question is, are there any self hosted DNS we can do that provides the failover like how dnsme does it?

  Read the article

• What is the optimum way to secure a company wide wiki?

  - by Mark Robinson

  We have a wiki which is used by over half our company. Generally it has been very positively received. However, there is a concern over security - not letting confidential information fall into the wrong hands (i.e. competitors). The default answer is to create a complicated security matrix defining who can read what document (wiki page) based on who created it. Personally I think this mainly solves the wrong problem because it creates barriers within the company instead of a barrier to the external world. But some are concerned that people at a customer site might share information with a customer which then goes to the competitor. The administration of such a matrix is a nightmare because (1) the matrix is based on department and not projects (this is a matrix organisation), and (2) because in a wiki all pages are by definition dynamic so what is confidential today might not be confidential tomorrow (but the history is always readable!). Apart from the security matrix, we've considered restricting content on the wiki to non super secret stuff, but off course that needs to be monitored. Another solution (the current) is to monitor views and report anything suspicious (e.g. one person at a customer site having 2000 views in two days was reported). Again - this is not ideal because this does not directly imply a wrong motive. Does anyone have a better solution? How can a company wide wiki be made secure and yet keep its low threshold USP? BTW we use MediaWiki with Lockdown to exclude some administrative staff.

  Read the article

• CentOS Vs Windows Server 2008

  - by Steve

  Hi, Apologies if the question appears ambiguous, I have little experience in this area and was after some informed opinions. I am deploying a test scenario of a server/client network and need to make some choices for Server. The client will be a Windows system as it meets the requirements for the client, the server choice has more room for selection. From my experience with Linux in general and the appealing nature of open source for low cost, security etc and the availability and performance of database and web server programs I have been considering CentOS as a server choice. I have the ability to make most of the choices of what software / server packages I wish to install. This includes Active Directory (something I have no experience with). How well does this operate with Windows clients? Am I being too selective and creating unnecessary complication by setting out not to use a Windows Server OS?

  Read the article

• automating sql express backup via VSS backup

  - by Ornus

  I need to set up on my server automated daily SQL db backups (sql express, so no maintenance plans). To keep things simple I'm gonna use a backup solution (JungleDisk) that uses VSS to back up the DB file. SQL fully supports VSS and on requests freezes DB I/O, so I understand I'm taking snapshots. JungleDisk supports doing differential back up and compression, so it simplifies things and keeps the cost/bandwidth down. Is it enough to just backup up db file (mdf). Do I need to back up transaction log (ldf) file as well? I'm ok with losing a day's worth of work (since the last backup). if I go this route, what's the best way to restore the database? are there any issues with this approach I'm not aware of?

  Read the article

• Virtual Machine files on ramdisk doesn't run faster than on physical disk

  - by Landy

  I installed total 36G memory (4x8G + 2x2G) in the host (Windows 7) and I used ImDisk to create a 32G ramdisk and format it to NTFS file system. Then I copied the virtual machine (in VMware Workstation format) folder, including vmx, vmdk, etc... to the new created ram disk. Then I tried to power on it in VMware Workstation. What made me surprised is that the performance is not better than before. It cost almost the same time to power on the Windows 7 VM. I check the Resource Monitor in the Windows 7 host, and the statistics of CPU, disk, network are rather normal. The memory has reported 3000+ hard fault/sec when guest OS boot then drop to 0 after the guest powered on. Any idea about this issue? I had thought the performance of ramdisk will be better than physical disk in this case. Am I wrong? Thanks.

  Read the article

• In general, do 3rd-party laptop AC adapters / chargers work reliably?

  - by MGOwen

  The AC adapters for my 2 dell laptops wore out very quickly. One supplies power but won't charge the battery (it's about 3 years old, the other is a bit newer). Both have worn through to the shielding around the notebook connector and look like they'll be unusable soon. Checking user reviews of the replacement adapter on Dell's own website, it appears they usually fail this fast. Apparently Dell does this deliberately to make money (their adapters sell for about 10-15 times what they cost to make). Same with replacement batteries. I can see there are plenty of much cheaper ($50 less) compatible AC adapters on eBay. Does anyone have experience with these? Naturally I'm nervous a crappy knock-off could fry my notebook, but has this ever actually happened to anyone recently? Has anyone had a good experience? Can anyone recommend a good online seller (who doesn't charge nonsensical shipping costs to Australia, preferably?)

  Read the article

• Plug and Go NAS Storage

  - by graham.reeds

  My wife and I are separating. One of the things we need to extricate is the media we have accumulated over the years. So I am looking for a NAS solution that is a) relatively low-cost, b) reliable and c) easy for a non-geek to use (I don't want to be tech support). All it needs to do is hold our iTunes library, photos, course work and maybe some movies and TV shows that I currently have. She will be connecting via her Netbook. I have seen this thread but the reviews on Amazon aren't particularly favourable. Due to the need for simplicity, WHS and FreeNAS are none-starters. I need redundancy as if a single drive system was to die then she would lose her course work and photos. Is the ReadyNAS the only real solution out there?

  Read the article

• Should I split my website into different servers

  - by Nyxynyx

  I have a website where a user uploads photos, the photos gets resized and thumbnailed, and stored on the server. At the same time, there are some INSERTS into a MySQL table regarding the photo uploaded (like description, user id etc). The site currently runs off a managed VPS, and I love the support it provides. However it is expensive to store the many small photos and the resizing and thumbnailing processes do cause spikes on the app performance. (Amazon S3 is pretty expensive, especially considering the costs for uploading many small files) Question: Will it be a good idea to move the image processing operations and image storage to another server which is an unmanaged dedicated server with a much lower cost/gb and keep the current VPS for its 24/7 support and hosting the webapp? Or should I move the entire site to the dedicated server? VPS Specs 16 cores 2.4GHz (E5620) 1GB memory 60GB Storage 3.5TB transfer $43/mth Managed (24/7) Dedicated Specs i3 2130 2 cores 3.4+ GHz 16 GB DDR3 2 x 1TB SATA2 storage 15 TB transfer $79/mth Unmanaged (Weekdays support) Software used Apache PHP MySQL Solr PostgreSQL ImageMagick

  Read the article

• Best configuration and deployment strategies for Rails on EC2

  - by Micah

  I'm getting ready to deploy an application, and I'd like to make sure I'm using the latest and greatest tools. The plan is to host on EC2, as Heroku will be cost prohibitive for this application. In the recent past, I used Chef and the Opscode platform for building and managing the server infrastructure, then Capistrano for deploying. Is this still considered a best (or at least "good") practice? The Chef setup is great once done, but pretty laborious to set up. Likewise, Capistrano has been good to me over the past several years, but I thought I'd take some time to look around and seeing if there's been any landscape shifts that I missed.

  Read the article

• How long to erase flash memory (RAID controller)?

  - by Rob Nicholson

  I made a bit of a boo boo last night in upgrading the BIOS in a Silicon Image Sil3132 eSATA adapter. It's a RAID controller in a server. I accidently flashed it with the wrong BIOS ;-) Not the end of the world as this card only cost £15 but I'm trying to flash it with the correct BIOS as it won't obviously work anymore. Silicon Image supply a DOS program for flashing and I thought I'd use the Erase function to get rid of the old BIOS. Any idea how long this should take? It's been sat at the "Erasing memory" prompt for about 15 minutes. Thanks, Rob.

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >