Search Results

Search found 5565 results on 223 pages for 'global'.

Page 81/223 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Cisco ASA5505 8.2 Multiple Outside IP to Multiple Inside IP

  - by GriffJ

  Trying to setup ASA5505. Semi working but having issues with accessing services from the outside. ASA5505 Basic License, Version 8.2. (plus upgrade to unlimited inside hosts). Alert: I'm a Cisco Noob. 321.321.39.X is a place holder for privacy. I came up with this config and tested it tonight. ASA Version 8.2(1) ! hostname <removed> domain-name <removed> enable password <removed> encrypted passwd <removed> encrypted names ! interface Vlan1 nameif inside security-level 100 ip address 172.21.36.1 255.255.252.0 ! interface Vlan2 nameif outside security-level 0 ip address 321.321.39.10 255.255.255.248 ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name <removed> access-list outside_inbound extended permit tcp any host 321.321.39.10 eq pptp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq https access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 993 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq smtp access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 1001 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq 465 access-list outside_inbound extended permit tcp any host 321.321.39.11 eq domain access-list outside_inbound extended permit udp any eq domain host 321.321.39.11 eq domain access-list outside_inbound extended permit tcp any host 321.321.39.12 eq www access-list outside_inbound extended permit tcp any host 321.321.39.12 eq https access-list outside_inbound extended permit tcp any host 321.321.39.13 eq www access-list outside_inbound extended permit tcp any host 321.321.39.13 eq https access-list outside_inbound extended permit icmp any any echo-reply access-list outside_inbound extended permit icmp any any source-quench access-list outside_inbound extended permit icmp any any unreachable access-list outside_inbound extended permit icmp any any time-exceeded access-list outside_inbound extended permit icmp any any traceroute access-list outside_inbound extended permit icmp any any echo pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 2 321.321.39.11-321.321.39.14 netmask 255.255.255.248 global (outside) 1 interface nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface pptp 172.21.37.20 pptp netmask 255.255.255.255 static (inside,outside) 321.321.39.11 172.21.37.14 netmask 255.255.255.255 static (inside,outside) 321.321.39.12 172.21.37.24 netmask 255.255.255.255 static (inside,outside) 321.321.39.13 172.21.37.17 netmask 255.255.255.255 access-group outside_inbound in interface outside route outside 0.0.0.0 0.0.0.0 321.321.39.9 1 route inside 192.168.15.0 255.255.255.0 172.21.36.52 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 172.21.36.0 255.255.252.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 telnet 172.21.36.0 255.255.252.0 inside telnet timeout 60 ssh timeout 5 console timeout 0 threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect pptp inspect ipsec-pass-thru inspect http ! service-policy global_policy global prompt hostname context The servers that had static forwards did not have any outside network access. couldn't ping google.com for instance. mail server couldn't Domain POP the Barracuda spam filter from our ISP etc. So after doing some reading I removed the statics for 172.21.37.11, 12 and 13, and replaced those three with what's below.. static (inside,outside) tcp 321.321.39.11 https 172.21.37.14 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 993 172.21.37.14 993 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 smtp 172.21.37.14 smtp netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 1001 172.21.37.14 1001 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 465 172.21.37.14 465 netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.11 domain 172.21.37.14 domain netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 www 172.21.37.24 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.12 https 172.21.37.24 https netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 www 172.21.37.17 www netmask 255.255.255.255 static (inside,outside) tcp 321.321.39.13 https 172.21.37.17 https netmask 255.255.255.255 Now the servers (for instance 172.21.37.14) could ping the outside world again. Mail started flowing (Domain POP was successful) etc. etc. But I forgot to check if webmail worked from the outside admittedly. But the webservers at 172.21.37.17 and 172.21.37.24 still didn't respond from the outside world. Although I was able to PPTP VPN in on 321.321.39.10 (interface) which is the outside interface IP address. and it is static mapped to 172.21.37.20. So I'm thinking there must be something wrong with NAT somewhere? no response from 321.321.39.11 to 321.321.39.14.. Could anyone look over the config and please let me know what I've done wrong? Is there something I've missed? well obviously but.. please help! Thank you.

  Read the article

• BGP Dual-As support, any RFC?

  - by Saran

  Generally most of routers like cisco and junos allow a router to have dual-As to be configured via a "local-as" command which overrides the global as-number configured in "router bgp ". Also local-as prepending may or may not happen based on configurations; for example "no-prepend" in cisco. Now my question is, is there any RFC which which standardises this Dual-As support?? Which provides guidelines on whether or not to prepend the "local-as" to As-Path attributes in the Bgp updates ?

  Read the article

• outbound ftp on server 2008 r2 stalls

  - by Scott Kramer

  the built in command line ftp client in server 2008 does not support passive mode so I've used these commands to allow outbound ftp (it stalls without this) 1) Open port 21 on the firewall netsh advfirewall firewall add rule name="FTP (no SSL)" action=allow protocol=TCP dir=in localport=21 2) Activate firewall application filter for FTP (aka Stateful FTP) that will dynamically open ports for data connections netsh advfirewall set global StatefulFtp enable however in server 2008 r2, these commands seem to work, but it does not affect the outbound ftp, it stalls I do not want to use an alt client

  Read the article

• Firefox hangs on downloads

  - by Shandy

  My firefox has begun to hang when/after downloading files generally, but today I got a specific error: chrome://global/content/bindings/general.xml:0 This error came up in the Page Info windoa, Media tab, trying to download an image from a site and after a pause of a minute or so. Any suggestions?

  Read the article

• Add constant value to numeric XML attribute

  - by Dave Jarvis

  Background Add a constant value to numbers matched with a regular expression, using vim (gvim). Problem The following regular expression will match width="32": /width="\([0-9]\{2\}\)" Question How do you replace the numeric value of the width attribute with the results from a mathematical expression that uses the attribute's value? For example, I would like to perform the following global replacement: :%s/width="\([0-9]\{2\}\)"/width="\1+10"/g That would produce width="42" for width="32" and width="105" for width="95". Thank you!

  Read the article

• ffmpeg works on terminal not with PHP exec

  - by goliatone

  If I execute a ffmpeg command from terminal, I get the desired result: ffmpeg -i src.mp4 -ar 22050 -ab 32 -f flv -s 320x240 video.flv Terminal's output ... video:3404kB audio:1038kB global headers:0kB muxing overhead 2.966904% Then, if called via PHP exec: exec("ffmpeg -i src.mp4 -ar 22050 -ab 32 -f flv -s 320x240 video.flv", $o, $v); var_dump($o); var_dump($v); the output is: array(0) { } int(1) Any thoughts on how to approach this?

  Read the article

• dnsmasq local network works for some but hostnames are not resolving for others

  - by prggmr

  I have set up a local network and it seems that some of us can use it properly while others can't. The problem seems to be that the local hostnames I setup don't get resolved for everyone. To overview how the network is setup: I am running an Ubuntu 10.01 server using dnsmasq, this server is setup to act as our primary DNS server, configured via our router. dnsmasq is configured using the options of domain-needed bogus-priv I use the /etc/hosts file to determain the hostnames 192.168.1.10 ra.xsi 192.168.1.10 test.xsi From my machine: If I dig the hostnames they resolve properly ; <<>> DiG 9.4.3-P1 <<>> ra.xsi ;; global options: printcmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 61671 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 9 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:28:34 2011 ;; MSG SIZE rcvd: 40 Ping also works: PING ra.xsi (192.168.1.10): 56 data bytes 64 bytes from 192.168.1.10: icmp_seq=0 ttl=64 time=0.834 ms 64 bytes from 192.168.1.10: icmp_seq=1 ttl=64 time=0.699 ms ^C --- ra.xsi ping statistics --- 2 packets transmitted, 2 packets received, 0% packet loss round-trip min/avg/max/stddev = 0.699/0.766/0.834/0.068 ms And login via SSH works using the hostname. For those that cannot connect using hostnames, if I dig from their machine it appears the name is being resolved, but they cannot ping, SSH or http access the hostname. ; <<>> DiG 9.6.0-APPLE-P2 <<>> ra ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 12554 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;ra.xsi. IN A ;; ANSWER SECTION: ra.xsi. 0 IN A 192.168.1.10 ;; Query time: 8 msec ;; SERVER: 192.168.1.10#53(192.168.1.10) ;; WHEN: Wed Nov 9 12:05:50 2011 ;; MSG SIZE rcvd: 36 I've been banging my head at this and just can't seem to figure it out.

  Read the article

• Where does Snow Leopard store per-user StartupItems?

  - by Stabledog

  I have several startup items shown in my "LoginItems" preferences. But, when I look at my ~/Library folder, there is no StartupItems folder, and the global /Library/StartupItems folder does not contain these things. So where are they keeping the per-user startup item settings?

  Read the article

• How to reset per application volume setting in Windows 7 and Vista

  - by Mehrdad

  I've altered per application volume settings for my applications. I want to reset every individual volume setting so that all apps use the global volume settings. How should I do that?

  Read the article

• ASA5505 Novice. Setting up Outside/Inside/and DMZ as Guest Network

  - by GriffJ

  I need a little help in developing a config for our ASA5505. I'm an MCSA/MCITPAS but I don't have a lot of practical cisco experience. Here is what I need help with, we currently have a PIX as our boarder gateway and well it's antiquated and it only has a 50 user license which means I'm constantly clearing local-host throughout the day as people complain. I discovered that the last IT person bought at couple ASA5505s and they've been sitting in the back of a cupboard. So far I've duplicated the configuration from the pix to the asa but as I was going to be going this far I thought I'd go further and remove another old cisco router that was used only for the guest network, I know the asa can do both jobs. So I'm going to paste a scenario I wrote up with the actual IPs changed to protect the innocent. ... Outside Network: 1.2.3.10 255.255.255.248 (we have a /29) Inside Network: 10.10.36.0 255.255.252.0 DMZ Network: 192.168.15.0 255.255.255.0 Outside Network on e0/0 DMZ Network on e0/1 Inside Network on e0/2-7 DMZ Network has DHCPD Enabled. DMZ DHCPD Pool is 192.168.15.50-192.168.15.250 DMZ Network needs to be able to see DNS on Inside Network at 10.10.37.11 and 10.10.37.12 DMZ Network needs to be able to access webmail on inside network at 10.10.37.15 DMZ Network needs to be able to access business website on inside network at 10.10.37.17 DMZ Network needs to be able to access the outside network (access to the internet). Inside Network has NO DHCPD. (dhcp is handled by domain controller) Inside Network needs to be able to see anything on the DMZ network. Inside Network needs to be able to access the outside network (access to the internet). There is some access-list stuff already, some static mapping already. Maps external IPs from our ISP to our inside server IPs static (inside,outside) 1.2.3.11 10.10.37.15 netmask 255.255.255.255 static (inside,outside) 1.2.3.12 10.10.37.17 netmask 255.255.255.255 static (inside,outside) 1.2.3.13 10.10.37.20 netmask 255.255.255.255 Allows access to our Webserver/Mailserver/VPN from the Outside. access-list 108 permit tcp any host 1.2.3.11 eq https access-list 108 permit tcp any host 1.2.3.11 eq smtp access-list 108 permit tcp any host 1.2.3.11 eq 993 access-list 108 permit tcp any host 1.2.3.11 eq 465 access-list 108 permit tcp any host 1.2.3.12 eq www access-list 108 permit tcp any host 1.2.3.12 eq https access-list 108 permit tcp any host 1.2.3.13 eq pptp Here is all the NAT and route stuff I have so far. global (outside) 1 interface global (outside) 2 1.2.3.11-1.2.3.14 netmask 255.255.255.248 nat (inside) 1 0.0.0.0 0.0.0.0 nat (dmz) 1 0.0.0.0 0.0.0.0 route outside 0.0.0.0 0.0.0.0 1.2.3.9 1

  Read the article

• SQL Server Full Text Search resource consumption

  - by Sam Saffron

  When SQL Server builds a fulltext index computer resources are consumed (IO/Memory/CPU) Similarly when you perform full text searches, resources are consumed. How can I get a gauge over a 24 hour period of the exact amount of CPU and IO(reads/writes) that fulltext is responsible for, in relation to global SQL Server resource usage. Are there any perfmon counters, DMVs or profiler traces I can use to help answer this question?

  Read the article

• Google DNS Same Entry Different Results

  - by Henrik P. Hessel

  Why is this happening? The Rootserver returns a wrong entry I fixed containing 5269.XXX.com. instead of 5269 XXX.com. Macbook @ Home ; <<>> DiG 9.6.0-APPLE-P2 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 18412 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 64328 IN SRV 10 0 5269 XXX.com. ;; Query time: 21 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:16:45 2010 ;; MSG SIZE rcvd: 86 Rootserver ; <<>> DiG 9.6-ESV-R1 <<>> @8.8.8.8 srv _xmpp-server._tcp.XXX.com. ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 27240 ;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;_xmpp-server._tcp.XXX.com. IN SRV ;; ANSWER SECTION: _xmpp-server._tcp.XXX.com. 52139 IN SRV 0 10 0 5269.XXX.com. ;; Query time: 7 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Tue Dec 28 03:23:23 2010 ;; MSG SIZE rcvd: 91

  Read the article

• Can the OS X unlock panel trigger a login hook similar to loginwindow?

  - by Allen

  I'd like to automatically run a shell script every time I authenticate onto my computer. However, all the info I can find about loginhook and Global LoginItems applies only when authenticating to "loginwindow," and not to the "unlock panel." The unlock panel prompts for a password when waking up from sleep or from a locked screen. Is there any way to trigger script execution after successfully unlocking the screen?

  Read the article

• Laptop Backup Synch to the Data Center Without VPN

  - by Sameer

  We would like to synchronize our users or backup their laptops to the data center – looking for suggestions/alternatives to synch them to the data center where they don’t have to know about it. Blue sky like to haves: • Don’t want VPN but needs to secure • Admin can access all files • Global dedup • Select file types only – MS Office, PSTs, PDFs • Incremental change only • Right now 60 users but needs to scale (all Windows7 64 bit) • Can allocate budget if have to Don’t mean to be vague but hoping to get some proven places to start.

  Read the article

• Exchange 2003 mailbox migrated to 2010 not showing up in Address book

  - by TJ

  I have migrated about 45 mailboxes at this point from our single instance of Exchange 2003 to a High Availability Exchange 2010 environment successfully. However one mailbox moved successfully and the user is able to send and receive e-mail internally and externally with no problems but they do not show up in the Global Address List. The OAB is owned by an Exchange 2010 mailbox server. What am I missing?

  Read the article

• Run AIR Debug Launcher (ADL) without a GUI for continuous build on Hudson CI and xvnc plugin

  - by jensendarren

  I cannot seem to get a headless FlexUnit build to run in Hudson CI + xvnc plugin on Ubuntu 9.04. Here is what I have tried: compiled using -use-network=false switch added Global Flash Player Trust file /var/lib/hudson/.macromedia/Flash_Player/#Security/FlashPlayerTrust/security.cfg (with the content /) commented out the last line "twm &" from /var/lib/hudson/.vnc/xstartup

  Read the article

• linux multipath routing load balance

  - by user52883

  I would like to know how to load balance two Business DLS links which have fixed IPs. I believe it would look something like this: ip route add default scope global \ nexthop via gatewayDLS1 dev interface1 weight 1 \ nexthop via gatewayDLS2 dev interface2 weight 1 Is this be all I need in order to get multipath routing? Please, give me a more detailed answer if possible, thanks you.

  Read the article

• Can IIS6 compression file types be configured on a per-site basis?

  - by Kev

  The following article explains how to customise the file types that can be compressed in IIS 6: Customizing the File Types IIS Compresses (IIS 6.0) [MS TechNet] The metabase settings discussed are global settings. Can I configure this on a per-site basis?

  Read the article

• Load balancers, multiple data centers and url based routing

  - by kunkunur

  There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

  Read the article

• OS X: How to force traffic through a specific SOCKS proxy on a per-app basis?

  - by GJ.

  I'm running a certain desktop app (actually via AIR if it makes any difference) which doesn't have any built-in proxy configuration settings. I need to get all traffic just from this app directed through a secure SOCKS proxy. This implies I can't use the global network preferences, as these would affect many other apps. Is there any way to force all network communication through a given SOCKS proxy on a per-app basis?

  Read the article

• Addig a second samba server to windows domain

  - by Eric

  Hi, I'm trying to add a second samba server (stand alone) to our windows domain, managed by a Samba server, but we've had some problems, we see the server and the shares, but cannot access the shares. We decided to start with minimal configuration. [global] netbios name = GINGER wins server = 192.168.0.2 workgroup = DOMAIN1 os level = 20 security = share passdb backend = tdbsam preferred master = no domain master = no [data] comment = Data path = /home/data guest only = Yes Again trying to access the share gives permissions error. Thanks,

  Read the article

• Ubuntu: shortcut key for file browser? (Equiv. of Win+E)

  - by bguiz

  Hi, In windows you can press the Windows key plus "E" to get the Windows Explorer window to open up any time. Is there an equivalent global hot-key to get the file explorer to show up? -- (Ubuntu Karmic if it makes a difference)

  Read the article

• Restarting or stopping apache results in waiting forever

  - by steko

  I have two simple WSGI apps running on top of mod_wsgi and apache2 on a test development server. There is no mod_python on this machine. The WSGI configuration is as follows WSGIDaemonProcess tops stack-size=524288 maximum-requests=5 WSGIScriptAlias /tops /home/ubuntu/tops-cloud/tops.wsgi <Directory /home/ubuntu/tops-cloud> WSGIProcessGroup tops WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> WSGIDaemonProcess flaskal maximum-requests=5 WSGIScriptAlias /c14 /home/ubuntu/c14/flaskal/flaskal.wsgi <Directory /home/ubuntu/c14/flaskal> WSGIProcessGroup flaskal WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> If I make changes to the app, I need to restart the web server, so I would expect that a simple sudo service apache2 restart does what I need. Same goes for any changes to the config (e.g. number of maximum requests, etc). Instead, it never ends "waiting", like this: $ sudo service apache2 restart * Restarting web server apache2 ... waiting .................................................. until I just do CTRL-C. At that point, the only way to resume a working server is to kill the process and restart it, not very convenient. The same happens with the stop command. The error logs at the "debug" level show the following lines after a failed restart [Wed Nov 14 21:55:19 2012] [notice] caught SIGTERM, shutting down [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Shutdown requested 'tops'. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Stopping process 'tops'. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Destroying interpreters. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Cleanup interpreter ''. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Terminating Python. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Shutdown requested 'flaskal'. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Stopping process 'flaskal'. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Destroying interpreters. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Cleanup interpreter ''. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Terminating Python. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=8920): Python has shutdown. [Wed Nov 14 21:55:19 2012] [info] mod_wsgi (pid=9047): Python has shutdown. If I then try to restart again (with the process still running), I get the following error: * Restarting web server apache2 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Action 'start' failed. The Apache error log may have more information. Unfortunately the Apache error log doesn't have anything. When apache2 is running properly, both apps work without any problem.

  Read the article

• URL Based Internal Redirecting

  - by bculverscate

  Basically, we have one external IP address, several servers internally and want to redirect to each internal server based on request URL. We do not want to install another piece of hardware to do this for us but we have a firewall running Linux that currently forwards to only one of the internal servers. Example of our setup can be seen here: http://img23.imageshack.us/img23/5469/drawing1br.jpg NOTE: domain.com does not point to this box nor would we like it to. Subdomains are pointed manually to our global IP address.

  Read the article

• When and how often to start connection to database in php?

  - by AndHeiberg

  When and how often is it good practice to start the connection to your database in php? I'm new to databases, and I'm wondering when I should start by database connection. I'm creating a api with an index, controllers and model. Should I start the connection in the index and then pass it to all the other files, start the connection at the top of all files and call it as a global in functions as needed or start and end the connection in every function?

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >