Search Results

Search found 4955 results on 199 pages for 'range'.

Page 81/199 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Forwarding data between two interfaces

  - by user84471

  I installed Ubuntu server 12.04 after that I installed dhcp3-server and configured it like this: At isc-dhcp-server INTERFACES="eth0" And in dhcpd.conf # A slightly different configuration for an internal subnet. subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.5 192.168.1.100; option domain-name-servers 192.168.1.1; option domain-name "nazwa.local"; option routers 192.168.1.1; option broadcast-address 192.168.1.255; default-lease-time 600; max-lease-time 7200; } Also I have two eth interfaces: # second netowrk interface auto eth0 iface eth0 inet static address 192.168.1.1 netmask 255.255.255.0 # The primary network interface auto eth1 iface eth1 inet dhcp When I plug computer to eth0 I get propertly ip adress but I can't visit any sites. I do even this: echo 1 > /proc/sys/net/ipv4/ip_forward

  Read the article

• Massive vehicular network simulator

  - by IvanK

  I am interested in making a vehicular network simulator (vehicular network as in vehicles can be equipped with radios and when they come in range they can talk with each other). I want to be able to scale to 1000s of nodes if not more. I am quite frankly torn on how to do, or even which language to use or whether I should instead be using some other piece of software/code. I know that this should depend on a lot of design decisions that I may have, but it would be great if somebody can point me towards the right direction. I was planning to use a multi-threaded architecture, but not sure whether it will add to the complication or make it easier. Also if I go for a multi-threaded architecutre, do you think that 'Go' language will be a good choice?

  Read the article

• Problem installing NVIDIA-Linux-x86-302.07.run in 12.04

  - by paj100

  I have a catch 22 problem in trying to install this driver (NVIDIA-Linux-x86-302.07.run) to set my screen to its native resolution of 1280x1024 (hpL1906). Problem is that in order to install this driver, I need to stop the XServer but when I do this (sudo service lightdm stop), my screen goes blank and displays the message - Out of Range 1280X1024 need to reset (or something similar) - and I can go no further. So, I cannot install NVIDIA-Linux-x86-302.07.run without stopping lightdm but when I do so, I can no longer see anything on the screen or go further to install the driver that would let me adjust the resolution. Any advice on getting out of this loop would be greatly appreciated.

  Read the article

• Guava 13.0 disponible, cette version du framework Java se concentre sur les Collections et les utilitaires (Base)

  Après seulement quelques mois depuis la release 12, l'équipe Guava nous propose la treizième version de son framework Java. Au programme de Guava 13.0, on note pas mal de travail autour des Collections et les utilitaires (Base), dont voici les ajouts principaux :FluentIterable.toSortedImmutableList et transformAndConcat ; ContiguousSet.create(Range, DiscreteDomain) ; Maps.synchronizedNavigableMap ; Sets.synchronizedNavigableSet ; Ordering.allEqual ; Funnels.asOutputStream, integerFunnel et longFunnel ; DoubleMath.fuzzyCompare et fuzzyEquals ; UnsignedBytes.parseUnsignedByte, toString et MAX_VALUE ; UnsignedInts.decode ; UnsignedLongs.decode ; CycleDetectingLockFactory ;

  Read the article

• Purchasing a TV show adaptation rights, how does it work?

  - by Mikalichov

  Basically, I was thinking about a game based on a TV show, just for fun, and ended up thinking "well, it's not like it can be made anyway". Or can it? In the present situation, developing a game by myself/ourselves on my/our free time, and then using crowdfunding to purchase the rights is not that crazy, if the show is really popular... and the rights not too expensive. Purchasing the rights of the whole show is obiously a sh!tload of money, but what about adaptation rights? What is the range of price it can be? Is it a percentage of the full rights? Does it depend on the kind of adaptation (novel vs. toy vs. game)? ps: if it can help answer, I was thinking about a MLPFIM retro RPG. Please don't laugh at me.

  Read the article

• Screencast: "Unlocking the Java EE Platform with HTML5"

  - by Geertjan

  The Java EE platform aims to increase your productivity and reduce the amount of scaffolding code needed in Java enterprise applications. It encompasses a range of specifications, such as JPA, EJB, JSF, and JAX-RS. How do these specifications fit together in an application, and how do they relate to each other? And how can HTML5 be used to leverage Java EE? In this recording of a session I did last week at Oredev in Malmo, Sweden, you learn how Java EE works and how it can be integrated with HTML5 front ends, via HTML, JavaScript, and CSS.

  Read the article

• AutoVue 20.2.1 is Now Available!

  - by Pam Petropoulos

  Oracle’s AutoVue Enterprise Visualization 20.2.1, a minor release within the 20.2 product family, has just been made available on the Oracle Software Delivery Cloud. AutoVue release 20.2.1 includes the following new capabilities and improvements: Enhancements to the Augmented Business Visualization framework to connect documents and business data in enterprise applications and create rich, actionable visual-decision making environment. AutoVue now allows hotspots in 2D drawings and images to be defined as polygons, rather than only by text strings or boxes. Improved Documentation on Augmented Business Visualization and Hotspotting Optimize business process efficiency by integrating AutoVue and Oracle BPM to: Initiate interactive document reviews by the appropriate reviewer in a workflow Automate printing and conversion operations at the appropriate stage of a workflow Timely support for new MCAD and  ECAD formats Fidelity and performance improvements for a wide range of formats Click here to read about the latest features and their corresponding benefits. Click here to access the latest AutoVue Format Support Sheet.

  Read the article

• Without using a pre-built physics engine, how can I implement 3-D collision detection from scratch?

  - by Andy Harglesis

  I want to tackle some basic 3-D collision detection and was wondering how engines handle this and give you a pretty interface and make it so easy ... I want to do it all myself, however. 2-D collision detection is extremely simple and can be done multiple ways that even beginner programmers could think up: 1.When the pixels touch; 2.when a rectangle range is exceeded; 3.when a pixel object is detected near another one in a pixel-based rendering engine. But 3-D is different with one dimension, but complex in many more so ... what are the general, basic understanding/examples on how 3-D collision detection can be implemented? Think two shaded, OpenGL cubes that are moved next to each other with a simple OpenGL rendering context and keyboard events.

  Read the article

• How would you tackle a pattern-finding program?

  - by Neil

  Just to be clear, I don't think this should be question better suited for stackoverflow.com simply because there's not a single answer but a wide range of possible solutions, making this question far more subjective in nature. I was curious how you guys would tackle a pattern-finding program, which is to say I'd do the following operations: I enter in some input. Program predicts my next input based on all previous inputs. Rinse. Repeat. Since the amount of input I could provide is so varied, including empty strings, conventional means such as switches or regular expressions are out, since it would require you to have an inkling of information about what to expect. I was thinking about some form of genetic algorithm, yet even then I don't have a clue as to how to approach a problem of this caliber. I think some feedback mechanism would be necessary as well as to let the program know how close it was. Anyone had to do a similar type program before?

  Read the article

• Is it possible to configure Ubuntu as a software firewall?

  - by user3215

  I have some systems running on Ubuntu in the private IP range 192.168.2.0-255 . These systems are connected to a switch and the switch is connected to the ISP's modem. Neither the switch nor the modem support firewall options. I don't have any firewall device and I'm not willing to individually configure firewalls on all the systems (via gui/iptables). Is it possible to make an Ubuntu system into something like a software firewall, so that all the traffic/packets sent to or from the WAN(internet) would be allowed/denied based on its firewall rules?

  Read the article

• Targeting a vehicle with complex movement?

  - by e100

  Targeting a vehicle with known constant velocity is simple, and collision is guaranteed. Imprecise AI can be modeled by adding a small error factor. But how would one go about targeting a vehicle whose movements are more complex? Perhaps it's evading the AI or another game object. I've been thinking about how I'd do it myself in a FPS (in which bullets have finite speed) and think there might need to be at least couple of targeting modes based on the target's movement in the previous second or so: If it's near linear (peak acceleration in a certain range) target with the linear model If it's highly irregular (perhaps size of bounding box of recent positions could be used?) , target at an average For now I can assume 2d space, AI is stationary and projectile moves linearly.

  Read the article

• How to name a clamp function that only clamps from one side?

  - by dog_funtom

  Clamp() is a function that ensures that provided variable is in provided range. You can find such function in .NET, in Unity, and probably anywhere. While it is useful, I often need to clamp my value from one side only. For example, to ensure that float is always non-negative or always positive (like radius value from inspector). I used names ClampFromAbove() and ClampFromBelow(), but I wonder if such names is good or even grammatically valid in programming-English. Also, it probably make sense to distinguish non-negative case too. How'd you name such function? Something like EnsureNonNegative()? My intention is creating pair of extension methods and use them like this: var normalizedRadius = originalRadius.ClampFromBelow(0.0001); var distance = someVector.Magnitude.ClampFromAbove(maxDistance);

  Read the article

• DevWeek 2010 is Coming Up

  The time has come again for the UK’s biggest conference for .NET developers and SQL Server professionals. The 13th annual DevWeek conference takes place on 15-19 March 2010 in London. Expert speakers will cover a large range topics, including .NET 4.0, Silverlight 3, WCF 4, Visual Studio 2010, Thread Synchronization, ASP.NET 4.0, SQL Server 2008 R2, Unit Testing, CLR & C# 4.0, Windows Azure, and T-SQL Tips & Tricks. Find out more. span.fullpost {display:none;}

  Read the article

• Unable to access media wiki pages from another computer?

  - by Kathiresan Jeyapandian

  I have set up a web server in my Windows 7 with easyPHP. The website works fine when I browse the locally via localhost or 127.0.0.1. But, unable to open the site from another computer which is in the same LAN or in connected to my LAN. My local IP is in the 10.x.x.x range. The firewall turned off on my private network. I've also tried by changing Listen 127.0.0.1:80 to Listen 80 In httpd.conf but still i'm unable to access the media wiki from other machines. Unable to browse the pages from other machines using localhost or using IP address (Ex: 10.x.x.x). Could you please let me know your suggestions and comments?

  Read the article

• Silverlight 4 + RIA Services - Ready for Business: Validating Data

    To continue our series lets look at data validation our business applications. Updating data is great, but when you enable data update you often need to check the data to ensure it is valid.  RIA Services as clean, prescriptive pattern for handling this.   First lets look at what you get for free.  The value for any field entered has to be valid for the range of that data type.  For example, you never need to write code to ensure someone didnt type is forty-two into...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Detect rotated rectangle collision

  - by handyface

  I'm trying to implement a script that detects whether two rotated rectangles collide for my game. I used the method explained in the following article for my implementation in Google Dart. 2D Rotated Rectangle Collision I tried to implement this code into my game. Basically from what I understood was that I have two rectangles, these two rectangles can produce four axis (two per rectangle) by subtracting adjacent corner coordinates. Then all the corners from both rectangles need to be projected onto each axis, then multiplying the coordinates of the projection by the axis coordinates (point.x*axis.x+point.y*axis.y) to make a scalar value and checking whether the range of both the rectangle's projections overlap. When all the axis have overlapping projections, there's a collision. First of all, I'm wondering whether my comprehension about this algorithm is correct. If so I'd like to get some pointers in where my implementation (written in Dart, which is very readable for people comfortable with C-syntax) goes wrong. Thanks!

  Read the article

• Vector normalization gives very imprecise results

  - by Kipras

  When I normalize vectors I receive very strange results. The lengths of the normalized vectors range from 1.0 to almost 1.5. The functions are all written by me, but I just can't find a mistake in my algorithm. When I normalize I just divide all components of the vector by the vector's length. public double length(){ return Math.sqrt(x*x + y*y); } public void normalize(){ if(length() > 0){ x /= length(); y /= length(); } } Is this supposed to happen? I mean I can see the length ranging from 0.9 to 1.1 at worst, but this is just overwhelming. Cheers

  Read the article

• Generate Unique Abstract Backgrounds with Ablaze

  - by Jason Fitzpatrick

  If you want custom and unique backgrounds without having to code your own image-generating engine, Ablaze makes it simple (and fun) to create abstract images. You can customize a wide array of options in Ablaze including the base shape (ring, horizontal line, or random), number of particles, distance each particle travels, and the speed (if you increase the speed range you get more distinct lines and if you decrease it you get smoother smokier shapes). You can also seed the design with a color palette pulled from any image you provide (the sample above was seeded with a Wonder Woman comic panel). Tweak and reset the pattern generation as much as you want; when you create an abstract image worthy of your desktop just click the save button to grab a copy of it in PNG format. Ablaze [via Flowing Data] How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• In-memory DB to perform intersects on set slices

  - by IanC

  I have a specific programming need where I need to efficiently store large sorted sets in memory, query them for ranges, and intersect them against other sets that are also queried for ranged. I am looking at Redis, but I can't see a range slice command. MongoDB can only use 1 index, so it has to perform row-level scans, whereas I wish to process using columns that are intersected. I'm also looking at Counchbase, but can't easily determine from the documentation if it is suited to this. I know it uses Memcached, which is AFAIK not suited to this usage. Could anyone share potential solutions for this specific problem? EDIT For example, I need to perform the following: Get the IDs of all cars where the price is between 2000 and 3000, and intersect that will all cars where the engine capacity is between 3000 and 4000.

  Read the article

• A c++ program that computes the min and max of f(x) for a rectangle inputed by user

  - by StreetBallerX

  So bassicly this is the problem quoted from my teacher : "You have to write a program in C++ that computes the minimal and the maximal value of function f(x,y) obtained on an integer point in a given rectangle [a, b] x [c, d]. Your program should prompt the user to input numerical values of a, b, c and d, as floating point numbers, which are expected to be in a range from -100 thru 100. In case when minimal or maximal values do not exists, your program should output appropriate messages. f(x,y)=x+x*x+x*x*x+y+y*y " So before anyone tell me that i should try do it myself , i'll tell them that ive been trying to do it myself for the past 8 days but my deadline is aproaching and i just cant figure it out its a really simple program but i just cant understand it ... I wont post my attempts because all i saw in these forums is that when someone posts their try and a milion people start to say dont look it this way thry this and bla bla and the guy who posted it was just wondering for minor thing ... so what ever thank you all in advance and thats it :)

  Read the article

• Silverlight 4 + RIA Services - Ready for Business: Validating Data

    To continue our series lets look at data validation our business applications. Updating data is great, but when you enable data update you often need to check the data to ensure it is valid.  RIA Services as clean, prescriptive pattern for handling this.   First lets look at what you get for free.  The value for any field entered has to be valid for the range of that data type.  For example, you never need to write code to ensure someone didnt type is forty-two into...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Setting Up Your SQL Server Agent Correctly

  It is important to set up SQL Server Agent Security on the principles of 'executing with minimum privileges’, and ensure that errors are properly logged and alerts are set up for a comprehensive range of errors. SQL Server Agent allows fine-grained control of every job step that should allow tasks to be run entirely safely even if they occasionally need special privileges. Can 41,000 DBAs really be wrong? Join 41,000 other DBAs who are following the new series from the DBA Team: the 5 Worst Days in a DBA’s Life. Part 3, As Corrupt As It Gets, is out now – read it here.

  Read the article

• What is the most handy function you've ever came across? [closed]

  - by Viniyo Shouta

  Obviously everything is 'handy' when it comes to programming terms, but some get a highlight spot, like containers, matrix trasnformation functions and many others. But in this case please mention the one it was more handy to you, saved you from sparing hours resolving a problem, or even the one you like more, What is it and what does it does? I'll start with an example. Language: C++ Function: std::sort (STL) What does it does: Arranges the elements in a specified range into a nondescending order or according to an ordering criterion specified by a binary predicate. (It arranges a container in decreasing order) Why of this question? Because I want to learn how to if possible make my own implementations of these functions for pure studying purposes, to enhance knowledge

  Read the article

• Cisco ASA: How to route PPPoE-assigned subnet?

  - by Martijn Heemels

  We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

  Read the article

• vba access values from excel workbook from another excel workbook

  - by user301752

  Any ideas why this code will not work? Workbooks.Open Filename:="C:\a.xls" Workbooks("a.xls").Activate Worksheets("b").Select Dim OutputArray(10, 10) OutputArray(1, 1) = Workbooks("c.xls").Worksheets("worksheet_otherthan_default").Select.Range(A1).Value I'm trying to run a macro in one file (unnamed here) to get data from (a.xls).

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >