Search Results

Search found 17407 results on 697 pages for 'static constructor'.

Page 81/697 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • AWS VPN Tunnel going down without traffic

    - by Asfura
    I managed to setup a site-to-site VPN connection from Amazon VPC to a company's network, and after a lot of configuration it was working fine, but now i realized that the VPN tunnel is DOWN every time there's no traffic going trough for a couple minutes. The only way that i have found to generate traffic is to reach the amazon instance from the company's network and then the tunnel goes up again. I had a cronjob doing ping every minute, but i think it should have a keepalive option somewhere, or at least a log file of the tunnels to find out what's going on. Any ideas to keep the tunnel up and/or bring it up from amazon? The firewall is a Checkpoint R75.20, it only allows one tunnel at a time for the same subnet, so i cant have both tunnels active. Thank you, any questions just ask. EDIT I forgot to add, the ping keepalive was working great (maybe generating a bit of traffic, but nothing to worry about), the connection dropped because i had to restart the instance, and it that little time it dropped me.

    Read the article

  • Can I run a mix of static addressing and NAT?

    - by aroth
    Let's say that an ISP offers a plan with 5 static IP addresses, but I have more than 5 devices, many of which (such as a networked printer, for instance) I do not want or need to have a static IP address. So the topography I'm planning goes something like: ISP -> Router -> Switch -> Computer (static address) -> Computer (static address) -> Printer (DHCP/NAT) -> Tv (DHCP/NAT) -> (...) -> Wireless Devices (DHCP/NAT) Generally speaking, is it possible to run a network like that? If not, then what sort of setup do I need so that I can assign static addresses just to the things that need them, and use DHCP/NAT for everything else? Also, what internal networking devices will consume a static IP address? I'm pretty sure the router will, correct? Does the switch also?

    Read the article

  • Centos 6.2 Fresh 'Basic Server' install networking issues

    - by RWC
    I've had a /29 provisioned on a network port for a server and am trying to at least configure the machine so I can ssh into it. It's Centos 6.2 x64 with the Basic Server install. Currently not able to ping gateway or any address for that matter. For reference: Default Interface: em2 Network ID: 66.*.*.0/29 Gateway: 66.*.*.1 Broadcast: 66.*.*.7 Please see my following configs: /etc/sysconfig/network-scripts/ifcfg-em2 DEVICE=em2 NM_CONTROLLED=yes ONBOOT=yes HWADDR=Not Important TYPE=Ethernet BOOTPROTO=none IPADDR=66.*.*.2 PREFIX=29 DNS1=8.8.8.8 DNS2=8.8.4.4 DEFROUTE=yes IPV4_FAILURE_FATAL=yes IPV6INIT=no NAME="System em2" NETMASK=255.255.255.248 USERCTL=no $: route -n Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 0.0.0.0 255.255.255.248 U 0 0 0 em2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 1003 0 em2 0.0.0.0 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: route Destination // Gateway // Genmask // Flags // Metric // Ref // Use // Iface 66.*.*.0 * 255.255.255.248 U 0 0 0 em2 link-local * 255.255.0.0 U 0 1003 0 em2 default 66.*.*.1 0.0.0.0 UG 0 0 0 em2 $: cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=excalibur.domain.com GATEWAY=66.*.*.1 Keep in mind that I cannot even currently ping the gateway which is quite confusing for me. My /etc/hosts are configured correctly with the *.2 address. I'm not concerned with getting all of the addresses on the /29 up and running yet, just one so I can at least ssh in. Thanks! Edit: Adding in ifconfig. $: ifconfig em2 Link encap:Ethernet HWaddr XX:XX:XX:XX:XX:XX inet addr:66.*.*.2 Bcat:66.*.*.7 Mask:255.255.255.248 inet6 addr: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5536 errors:0 dropped:0 overruns:0 frame:0 TX packets:10 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2599469 (2.4 MiB) TX bytes: 748 (748.0 b) Interrupt:48 Memory:dc000000-dc012800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:34 errors:0 etc etc

    Read the article

  • Website deployment - managing uploaded content?

    - by Legion
    I'm a programmer by trade, "server administrator" by company necessity. We're looking at dumping the old painful "update site by FTP upload" style of deployment. Having the webserver check out the latest code base from version control into a folder and having a "current" symlink point to the latest checkout (allowing for easily stepping back to an older version by changing the symlink) seems to be the way we want to go. But I have a question: what's a good practice for dealing with user-uploaded content? This stuff isn't in version control. I have a couple of ideas for dealing with this, but what is the smart, accepted practice?

    Read the article

  • Website deployment - managing user-uploaded content?

    - by Legion
    I'm a programmer by trade, "server administrator" by company necessity. We're looking at dumping the old painful "update site by FTP upload" style of deployment. Having the webserver check out the latest code base from version control into a folder and having a "current" symlink point to the latest checkout (allowing for easily stepping back to an older version by changing the symlink) seems to be the way we want to go. But I have a question: what's a good practice for dealing with user-uploaded content? This stuff isn't in version control. I have a couple of ideas for dealing with this, but what is the smart, accepted practice?

    Read the article

  • Tunneling a public IP to a remote machine

    - by Jim Paris
    I have a Linux server A with a block of 5 public IP addresses, 8.8.8.122/29. Currently, 8.8.8.122 is assigned to eth0, and 8.8.8.123 is assigned to eth0:1. I have another Linux machine B in a remote location, behind NAT. I would like to set up an tunnel between the two so that B can use the IP address 8.8.8.123 as its primary IP address. OpenVPN is probably the answer, but I can't quite figure out how to set things up (topology subnet or topology p2p might be appropriate. Or should I be using Ethernet bridging?). Security and encryption is not a big concern at this point, so GRE would be fine too -- machine B will be coming from a known IP address and can be authenticated based on that. How can I do this? Can anyone suggest an OpenVPN config, or some other approach, that could work in this situation? Ideally, it would also be able to handle multiple clients (e.g. share all four of spare IPs with other machines), without letting those clients use IPs to which they are not entitled.

    Read the article

  • How to make sure clients update their browser cache when my website is updated?

    - by user64204
    I am using the HTTP 1.1 Cache-Control header to implement client-side caching. Since I update my website only once a month I would like the CSS and JS files to be cached for 30 days with Cache-Control: max-age=2592000. The problem is that the 30-day period defined by Cache-Control doesn't coincide with the website update cycle, it starts from the moment the users visit the site and ends 30 days later, which means an update could occur in the meantime and users would be running with outdated content for a while, which could break the rendering of the website if for instance the HTML and CSS no longer match. How can I perform client-side caching of content for periods of several days but somehow get users to refresh their CSS/JS files after the website has been updated? One solution I could think of is that if website updates can be schedule, the max-age returned by the server could be decreased every day accordingly so that no matter when people visit the website, the end of caching period would coincide with the update of the website, but changing the server configuration every day goes against one of my sysadmin principles (once it's running, don't touch it).

    Read the article

  • Could a singleton type replace static methods and classes?

    - by MKO
    In C# Static methods has long served a purpose allowing us to call them without instantiating classes. Only in later year have we became more aware of the problems of using static methods and classes. They can’t use interfaces They can’t use inheritance They are hard to test because you can’t make mocks and stubs Is there a better way ? Obviously we need to be able to access library methods without instantiated classes all the time otherwise our code would become pretty cluttered One possibly solution is to use a new keyword for an old concept: the singleton. Singleton’s are global instances of a class, since they are instances we can use them as we would normal classes. In order to make their use nice and practical we'd need some syntactic sugar however Say that the Math class would be of type singleton instead of an actual class. The actual class containing all the default methods for the Math singleton is DefaultMath, which implements the interface IMath. The singleton would be declared as singleton Math : IMath { public Math { this = new DefaultMath(); } } If we wanted to substitute our own class for all math operations we could make a new class MyMath that inherits DefaultMath, or we could just inherit from the interface IMath and create a whole new Class. To make our class the active Math class, you'd do a simple assignment Math = new MyMath(); and voilá! the next time we call Math.Floor it will call your method. Note that for a normal singleton we'd have to write something like Math.Instance.Floor but the compiler eliminates the need for the Instance property Another idea would be to be able to define a singletons as Lazy so they get instantiated only when they're first called, like lazy singleton Math : IMath What do you think, would it have been a better solution that static methods and classes? Is there any problems with this approach?

    Read the article

  • Problem with GCC calling static templates functions in templated parent class.

    - by Adisak
    I have some code that compiles and runs on MSVC++ but will not compile on GCC. I have made a test snippet that follows. My goal was to move the static method from BFSMask to BFSMaskSized. Can someone explain what is going on with the errors (esp. the weird 'operator<' error)? Thank you. In the case of both #defines are 0, then the code compiles on GCC. #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 0 I get errors if I change either #define to 1. Here are the errors I see. #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 1 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP)': Test.cpp(492): error: 'CreateMaskFromHighBitSized' was not declared in this scope #define DOESNT_COMPILE_WITH_GCC 1 #define FUNCTION_IN_PARENT 0 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP) [with TCMP = int, T = int]': Test.cpp(500): instantiated from 'TVAL Snapper::BFWrappedInc(TVAL, TVAL, TVAL) [with TVAL = int]' Test.cpp(508): instantiated from here Test.cpp(490): error: invalid operands of types '<unresolved overloaded function type>' and 'unsigned int' to binary 'operator<' #define DOESNT_COMPILE_WITH_GCC 1 #define FUNCTION_IN_PARENT 1 Test.cpp: In static member function 'static typename Snapper::BFSMask<T>::T_Parent::T_SINT Snapper::BFSMask<T>::Create_NEZ(TCMP) [with TCMP = int, T = int]': Test.cpp(500): instantiated from 'TVAL Snapper::BFWrappedInc(TVAL, TVAL, TVAL) [with TVAL = int]' Test.cpp(508): instantiated from here Test.cpp(490): error: invalid operands of types '<unresolved overloaded function type>' and 'unsigned int' to binary 'operator<' Here is the code namespace Snapper { #define DOESNT_COMPILE_WITH_GCC 0 #define FUNCTION_IN_PARENT 0 // MASK TYPES // NEZ - Not Equal to Zero #define BFSMASK_NEZ(A) ( ( A ) | ( 0 - A ) ) #define BFSELECT_MASK(MASK,VTRUE,VFALSE) ( ((MASK)&(VTRUE)) | ((~(MASK))&(VFALSE)) ) template<typename TVAL> TVAL BFSelect_MASK(TVAL MASK,TVAL VTRUE,TVAL VFALSE) { return(BFSELECT_MASK(MASK,VTRUE,VFALSE)); } //----------------------------------------------------------------------------- // Branch Free Helpers template<int BYTESIZE> struct BFSMaskBase {}; template<> struct BFSMaskBase<2> { typedef UINT16 T_UINT; typedef SINT16 T_SINT; }; template<> struct BFSMaskBase<4> { typedef UINT32 T_UINT; typedef SINT32 T_SINT; }; template<int BYTESIZE> struct BFSMaskSized : public BFSMaskBase<BYTESIZE> { static const int SizeBytes = BYTESIZE; static const int SizeBits = SizeBytes*8; static const int MaskShift = SizeBits-1; typedef typename BFSMaskBase<BYTESIZE>::T_UINT T_UINT; typedef typename BFSMaskBase<BYTESIZE>::T_SINT T_SINT; #if FUNCTION_IN_PARENT template<int N> static T_SINT CreateMaskFromHighBitSized(typename BFSMaskBase<N>::T_SINT inmask); #endif }; template<typename T> struct BFSMask : public BFSMaskSized<sizeof(T)> { // BFSMask = -1 (all bits set) typedef BFSMask<T> T_This; // "Import" the Parent Class typedef BFSMaskSized<sizeof(T)> T_Parent; typedef typename T_Parent::T_SINT T_SINT; #if FUNCTION_IN_PARENT typedef T_Parent T_MaskGen; #else typedef T_This T_MaskGen; template<int N> static T_SINT CreateMaskFromHighBitSized(typename BFSMaskSized<N>::T_SINT inmask); #endif template<typename TCMP> static T_SINT Create_NEZ(TCMP A) { //ReDefineType(const typename BFSMask<TCMP>::T_SINT,SA,A); //const typename BFSMask<TCMP>::T_SINT cmpmask = BFSMASK_NEZ(SA); const typename BFSMask<TCMP>::T_SINT cmpmask = BFSMASK_NEZ(A); #if DOESNT_COMPILE_WITH_GCC return(T_MaskGen::CreateMaskFromHighBitSized<sizeof(TCMP)>(cmpmask)); #else return(CreateMaskFromHighBitSized<sizeof(TCMP)>(cmpmask)); #endif } }; template<typename TVAL> TVAL BFWrappedInc(TVAL x,TVAL minval,TVAL maxval) { const TVAL diff = maxval-x; const TVAL mask = BFSMask<TVAL>::Create_NEZ(diff); const TVAL incx = x + 1; return(BFSelect_MASK(mask,incx,minval)); } SINT32 currentsnap = 0; SINT32 SetSnapshot() { currentsnap=BFWrappedInc<SINT32>(currentsnap,0,20); return(currentsnap); } }

    Read the article

  • Xcode 3.2: Build & Analyze never finds any issues

    - by GamingHorror
    I've used the Clang Static Analyzer from the command line before. I wanted to try Xcode's built-in version via Build & Analyze. I never get any negative results even though i specially prepared my code with very obvious issues Clang was always able to point out: // over-releasing an object: [label release]; [label release]; // uninitialized vars, allocating but not freeing an object NSString* str; int number; CCLabel* newLabel = [[CCLabel alloc] initWithString:str fontName:str fontSize:number]; [newLabel setPosition:CGPointZero]; The result is always the same: a green checkbox, no issues. I read that C++ code can cause issues. I'm running this with cocos2d that includes box2d. Could this be a cause? Did anyone get results from Build & Analyze with the cocos2d engine? What else could it be? I also tried enabling the Static Analyzer Build Settings and then Build but the result was the same. I have restarted Xcode, cleaned all targets and emptied Xcode caches to no avail.

    Read the article

  • Just quick: How do you call a mutator from within a constructor in the same class?

    - by Blockhead
    For a homework assignment the instructions state (within Undergrad class): You do NOT need to include a default constructor, but you must write a full parameterized constructor (it takes 4 arguments) -- this constructor calls the parent class parameterized constructor and the mutator for year level. Because Undergrad extends Student, then Student is my parent class, right? I just can't quite figure out how I'm to use my year level mutator (which is just the simplest of methods) to assign my "year" attribute. public void setYear(int inYear) { year = inYear; } public Student(String inName, String inID, int inCredits) { name = inName; id = inID; credits = inCredits; } public Undergrad(String inName, String inID, int inCredits,int inYear) { super(inName, inID, inCredits); year = inYear; } I keep missing assignments because I spend too much time on these small specific points of the homework so just asking for a little help. I swear it's the wording that throws me off on these assignments almost as often as just learning the material itself.

    Read the article

  • Should a Perl constructor return an undef or a "invalid" object?

    - by DVK
    Question: What is considered to be "Best practice" - and why - of handling errors in a constructor?. "Best Practice" can be a quote from Schwartz, or 50% of CPAN modules use it, etc...; but I'm happy with well reasoned opinion from anyone even if it explains why the common best practice is not really the best approach. As far as my own view of the topic (informed by software development in Perl for many years), I have seen three main approaches to error handling in a perl module (listed from best to worst in my opinion): Construct an object, set an invalid flag (usually "is_valid" method). Often coupled with setting error message via your class's error handling. Pros: Allows for standard (compared to other method calls) error handling as it allows to use $obj->errors() type calls after a bad constructor just like after any other method call. Allows for additional info to be passed (e.g. 1 error, warnings, etc...) Allows for lightweight "redo"/"fixme" functionality, In other words, if the object that is constructed is very heavy, with many complex attributes that are 100% always OK, and the only reason it is not valid is because someone entered an incorrect date, you can simply do "$obj->setDate()" instead of the overhead of re-executing entire constructor again. This pattern is not always needed, but can be enormously useful in the right design. Cons: None that I'm aware of. Return "undef". Cons: Can not achieve any of the Pros of the first solution (per-object error messages outside of global variables and lightweight "fixme" capability for heavy objects). Die inside the constructor. Outside of some very narrow edge cases, I personally consider this an awful choice for too many reasons to list on the margins of this question. UPDATE: Just to be clear, I consider the (otherwise very worthy and a great design) solution of having very simple constructor that can't fail at all and a heavy initializer method where all the error checking occurs to be merely a subset of either case #1 (if initializer sets error flags) or case #3 (if initializer dies) for the purposes of this question. Obviously, choosing such a design, you automatically reject option #2.

    Read the article

  • Does a custom DataGridView Cell have to have a parameterless constructor?

    - by clawson
    I want to slight variation of the custom cell code example from the MS website How to: Customize Cells and Columns in the Windows Forms DataGridView Control by Extending Their Behavior and Appearance by passing an argument to the custom cell constructor. Public Sub New(ByVal a As Object) End Sub but then when I run the code it throws and exception MissingMethodException occured No parameterless constructor defined for this object. Does this mean that custom cells must have a parameterless constructor? Thanks.

    Read the article

  • Does JUnit4 testclasses require a public no arg constructor?

    - by Thomas Baun
    I have a test class, written in JUnit4 syntax, that can be run in eclipse with the "run as junit test" option without failing. When I run the same test via an ant target I get this error: java.lang.Exception: Test class should have public zero-argument constructor at org.junit.internal.runners.MethodValidator.validateNoArgConstructor(MethodValidator.java:54) at org.junit.internal.runners.MethodValidator.validateAllMethods(MethodValidator.java:39) at org.junit.internal.runners.TestClassRunner.validate(TestClassRunner.java:33) at org.junit.internal.runners.TestClassRunner.<init>(TestClassRunner.java:27) at org.junit.internal.runners.TestClassRunner.<init>(TestClassRunner.java:20) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.junit.internal.requests.ClassRequest.getRunner(ClassRequest.java:26) at junit.framework.JUnit4TestAdapter.<init>(JUnit4TestAdapter.java:24) at junit.framework.JUnit4TestAdapter.<init>(JUnit4TestAdapter.java:17) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.run(JUnitTestRunner.java:386) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.launch(JUnitTestRunner.java:911) at org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner.main(JUnitTestRunner.java:768) Caused by: java.lang.NoSuchMethodException: dk.gensam.gaia.business.bonusregulering.TestBonusregulerAftale$Test1Reader.<init>() at java.lang.Class.getConstructor0(Class.java:2706) at java.lang.Class.getConstructor(Class.java:1657) at org.junit.internal.runners.MethodValidator.validateNoArgConstructor(MethodValidator.java:52) I have no public no arg constructor in the class, but is this really necessary? This is my ant target <target name="junit" description="Execute unit tests" depends="compile, jar-test"> <delete dir="tmp/rawtestoutput"/> <delete dir="test-reports"/> <mkdir dir="tmp/rawtestoutput"/> <junit printsummary="true" failureproperty="junit.failure" fork="true"> <classpath refid="class.path.test"/> <classpath refid="class.path.model"/> <classpath refid="class.path.gui"/> <classpath refid="class.path.jfreereport"/> <classpath path="tmp/${test.jar}"></classpath> <batchtest todir="tmp/rawtestoutput"> <fileset dir="${build}/test"> <include name="**/*Test.class" /> <include name="**/Test*.class" /> </fileset> </batchtest> </junit> <junitreport todir="tmp"> <fileset dir="tmp/rawtestoutput"/> <report todir="test-reports"/> </junitreport> <fail if="junit. failure" message="Unit test(s) failed. See reports!"/> </target> The test class have no constructors, but it has an inner class with default modifier. It also have an anonymouse inner class. Both inner classes gives the "Test class should have public zero-argument constructor error". I am using Ant version 1.7.1 and JUnit 4.7

    Read the article

  • Encapsulate update method inside of object or have method which accepts an object to update

    - by Tom
    Hi, I actually have 2 questions related to each other: I have an object (class) called, say MyClass which holds data from my database. Currently I have a list of these objects ( List < MyClass ) that resides in a singleton in a "communal area". I feel it's easier to manage the data this way and I fail to see how passing a class around from object to object is beneficial over a singleton (I would be happy if someone can tell me why). Anyway, the data may change in the database from outside my program and so I have to update the data every so often. To update the list of the MyClass I have a method called say, Update, written in another class which accepts a list of MyClass. This updates all the instances of MyClass in the list. However would it be better instead to encapulate the Update() method inside the MyClass object, so instead I would say foreach(MyClass obj in MyClassList) { obj.update(); } What is a better implementation and why? The update method requires a XML reader. I have written an XML reader class which is basically a wrapper over the standard XML reader the language natively provides which provides application specific data collection. Should the XML reader class be in anyway in the "inheritance path" of the MyClass object - the MyClass objects inherits from the XML reader because it uses a few methods. I can't see why it should. I don't like the idea of declaring an instance of the XML Reader class inside of MyClass and an MyClass object is meant to be a simple "record" from the database and I feel giving it loads of methods, other object instances is a bit messy. Perhaps my XML reader class should be static but C#'s native XMLReader isn't static.? Any comments would be greatly appreciated Thanks Thomas

    Read the article

  • In PHP, is it possible to create an instance of an class without calling class's constructor ?

    - by Rachel
    By any means, is it possible to create an instance of an php class without calling its constructor ? I have Class A and while creating an instance of it am passing file and in constructor of Class A am opening the file. Now in Class A, there is function which I need to call but am not required to pass file and so there is not need to use constructor functionality of opening file as am not passing file. So my question is, Is it possible by any means to create an instance of an PHP class without calling its constructor ?

    Read the article

  • Returning c_str from a function

    - by user199421
    This is from a small library that I found online: const char* GetHandStateBrief(const PostFlopState* state) { static std::ostringstream out; ... rest of the function ... return out.str().c_str() Now in my code I am doing this: const char *d = GetHandStateBrief(&post); std::cout<< d << std::endl; Now, at first d contained garbage. I then realized that the c string I am getting from the function is destroyed when the function returns because std::ostringstream is allocated on the stack. So I added: return strdup( out.str().c_str()); And now I can get the text I need from the function. I have two questions: 1) Am I understanding this correctly? 2) I later noticed that the ostringstream was was allocated with static storage. Doesn't that mean that the object is supposed to stay in memory until the program terminates? and if so , then why can't I access the string?

    Read the article

  • Findbugs and comparing

    - by Rob Goodwin
    I recently started using the findbugs static analysis tool in a java build I was doing. The first report came back with loads of High Priority warnings. Being the obsessive type of person, I was ready to go knock them all out. However, I must be missing something. I get most of the warnings when comparing things. Such as the following code: public void setSpacesPerLevel(int value) { if( value >= 0) { ... produces a high priority warning at the if statement that reads. File: Indenter.java, Line: 60, Type: BIT_AND_ZZ, Priority: High, Category: CORRECTNESS Check to see if ((...) & 0) == 0 in sample.Indenter.setSpacesPerLevel(int) I am comparing an int to an int, seems like a common thing. I get quite a few of that type of error with similar simple comparisons. I have alot of other high priority warnings on what appears to be simple code blocks. Am I missing something here? I realize that static analysis can produce false positives, but the errors I am seeing seem too trivial of a case to be a false positive. This one has me scratching my head as well. for(int spaces = 0;spaces < spacesPerLevel;spaces++){... Which gives the following findbugs warning: File: Indenter.java, Line: 160, Type: IL_INFINITE_LOOP, Priority: High, Category: CORRECTNESS There is an apparent infinite loop in sample.Indenter.indent() This loop doesn't seem to have a way to terminate (other than by perhaps throwing an exception). Any ideas? So basically I have a handful of files and 50-60 high priority warnings similar to the ones above. I am using findbugs 1.3.9 and calling it from the findbugs ant task

    Read the article

  • Should I create protected constructor for my singleton classes?

    - by Vijay Shanker
    By design, in Singleton pattern the constructor should be marked private and provide a creational method retuning the private static member of the same type instance. I have created my singleton classes like this only. public class SingletonPattern {// singleton class private static SingletonPattern pattern = new SingletonPattern(); private SingletonPattern() { } public static SingletonPattern getInstance() { return pattern; } } Now, I have got to extend a singleton class to add new behaviors. But the private constructor is not letting be define the child class. I was thinking to change the default constructor to protected constructor for the singleton base class. What can be problems, if I define my constructors to be protected? Looking for expert views....

    Read the article

  • C++ - Basic WinAPI question

    - by HardCoder1986
    Hello! I am now working on a some sort of a game engine and I had an idea to put everything engine-related into a static library and then link it to my actual problem. Right now I achieved it and actually link that library and every functions seem to work fine, except those, which are windows-related. I have a chunk of code in my library that looks like this: hWnd = CreateWindow(className, "Name", WS_OVERLAPPED | WS_CAPTION | WS_EX_TOPMOST, 0, 0, 800, 600, NULL, NULL, GetModuleHandle(NULL), this); if (hWnd) { ShowWindow(hWnd, SW_NORMAL); UpdateWindow(hWnd); } else { MessageBox(NULL, "Internal program error", "Error", MB_OK | MB_ICONERROR); return; } When this code was not in the library, but in the actual project, it worked fine, created the window and everything was ok. Right now (when I'm linking to my library that contains this code) CreateWindow(...) call returns NULL and GetLastError() returns "Operation succesfully completed" (wtf?). Could anybody help me with this? Is it possible to create a window and display it using a static library call and why could my code fail? Thank you.

    Read the article

  • Random number generation in MVC applications

    - by SlimShaggy
    What is the correct way of generating random numbers in an ASP.NET MVC application if I need exactly one number per request? According to MSDN, in order to get randomness of sufficient quality, it is necessary to generate multiple numbers using a single System.Random object, created once. Since a new instance of a controller class is created for each request in MVC, I cannot use a private field initialized in the controller's constructor for the Random object. So in what part of the MVC app should I create and store the Random object? Currently I store it in a static field of the controller class and lazily initialize it in the action method that uses it: public class HomeController : Controller { ... private static Random random; ... public ActionResult Download() { ... if (random == null) random = new Random(); ... } } Since the "random" field can be accessed by multiple instances of the controller class, is it possible for its value to become corrupted if two instances attempt to initialize it simultaneously? And one more question: I know that the lifetime of statics is the lifetime of the application, but in case of an MVC app what is it? Is it from IIS startup till IIS shutdown?

    Read the article

  • How to keep track of call statistics? C++

    - by tf.rz
    I'm working on a project that delivers statistics to the user. I created a class called Dog, And it has several functions. Speak, woof, run, fetch, etc. I want to have a function that spits out how many times each function has been called. I'm also interested in the constructor calls and destructor calls as well. I have a header file which defines all the functions, then a separate .cc file that implements them. My question is, is there a way to keep track of how many times each function is called? I have a function called print that will fetch the "statistics" and then output them to standard output. I was considering using static integers as part of the class itself, declaring several integers to keep track of those things. I know the compiler will create a copy of the integer and initialize it to a minimum value, and then I'll increment the integers in the .cc functions. I also thought about having static integers as a global variable in the .cc. Which way is easier? Or is there a better way to do this? Any help is greatly appreciated!

    Read the article

  • Should I pass an object into a constructor, or instantiate in class?

    - by Prisoner
    Consider these two examples: Passing an object to a constructor class ExampleA { private $config; public function __construct($config) { $this->config = $config; } } $config = new Config; $exampleA = new ExampleA($config); Instantiating a class class ExampleB { private $config; public function __construct() { $this->config = new Config; } } $exampleA = new ExampleA(); Which is the correct way to handle adding an object as a property? When should I use one over the other? Does unit testing affect what I should use?

    Read the article

  • Can I get build warnings from a custom build step in Qt Creator?

    - by Derick
    I have the following script that I run as a custom build step in Qt Creator: git ls-files . | egrep "\.cpp$|\.h$" | xargs vera++ Which then gives output: foo/bar.cpp:1: no copyright notice found Another script I also use is: cppcheck . --template gcc -q --enable=style,unusedFunctions With the output: apple.h:8: style: The class 'MyPie' has no constructor. Member variables not initialized. I would love to double-click on the error and go to the source in the Compile Output window. It seems that only gcc errors are detected and these custom ones are ignored even though they have the same format.

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >