Search Results

Search found 60540 results on 2422 pages for 'windows 2003 webserver'.

Page 81/2422 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Strange network issue (ZIP file fails CRC test over VPN)

    - by Joe Schmoe
    We have a server in the office running Windows Server 2003 Our office is connected to our datacenter via hardware VPN (Linksys RV082 router in the office to CISCO router in the datacenter). There is a job that runs on the server in the office that does following: ZIP certain files from the server using 7Zip, copy ZIP file to a network share in the office and verify ZIP integrity, copy ZIP file to a network share in the data center and verify ZIP integrity. Problem is - verifying ZIP integrity for the file in the data center always fails. However, if I run 7Zip on the server in data center that exposes that share ZIP file verifies just fine, so it is not actually corrupted during copy operation. Additionally, I tried running ZIP on other computers in the office to verify ZIP file on datacenter file share and it verifies OK. I tried plugging server to the same network port where my workstation is connected using different cable (my workstation doesn't exhibit this problem) and ZIP verification still fails. So the problem is local to that specific server. On network adapter properties for the server in question there is no "Advanced" tab where one can usually configure a lot of network settings. Network card driver is up to date (Windows Update doesn't find anything newer and Lenovo website doesn't have any drivers for Windows 2003 for this computer model). Is there any other way to configure network setting via command line? What settings could be relevant to this problem?

    Read the article

  • oracle access on vmware fusion

    - by gaudi_br
    Hello, I'm running snow leopard and I'm doing some development that requires some network knowledge. I've installed vmware fusion 3.0 and I've set up a virtual machine with windows 2003 server. I need to mimic the exact configuration of another server in the network, so I really need to run the versions I'll be mentioning here. Besides, I set up two network configurations on the VM: one NAT config (so that I can have internet access) and one host-only config (because I need to use another server's mac adress and my local area network might have a problem with it) From the installation of windows 2003, I then installed oracle 10.2.0.1. During the installation I received a warning about the primary ip-address of the system being dhcp assigned, but I ignored it (maybe it was a mistake)... Now, from experience, unless the DHCP assigned address changes, I should be able to access the guest system's database from the host system, so I went to safari and tried to access the oracle em. As it turns out, because my computer is on a company network, the company's DNS doesn't know about the virtual machine, unless of course I switch to a bridged network config. However, I don't want to do that because I don't to mix up the domains. So I guess the question is, how can I define my own dns or router, or whatever it is that I need to define so that whenever I try the guest system's ip address form the host, it will use the vmnet1 or vmnet8 interface define by vmware and bypass the dns configuration of my local area network. I'd also like to know what to do incase I want to change ip addresses on the guest machine without having oracle go haywire (I've noticed a few folders on the structure which are specific for the very first IP Address)... Any help would be appreciated. Thanks in advance.

    Read the article

  • Windows Server Backup "Reading Data; please wait..."

    - by Reafidy
    On windows Server 2008 R2 I have recently added the windows server backup (WSB) feature. Opening WSB I get the message "Reading Data; please wait...". This message fails to go away, even after leaving the server for over 12 hours. I also notice in the task manager that svchost.exe (username: networkservice) is using all available processing power. So I terminated that process and then WSB comes on-line. However after restarting the server and WSB the issue reoccurs. WSB also fails to recognize my store-in-go flash drive (2gb). What is the underlying problem here?

    Read the article

  • InstallShield 2010 - 1603 Fatal Error [Windows Installer] (Windows 7 Only)

    - by gtas
    Hi all, I created an MSI InstalScript Project where i deploy a web based (ASP.NET) precompiled project copying the files during installation in the \inetpub\wwwroot\projectnamefolder, creating an AppPool and the virtual dir of course in the IIS. The setup works great in windows XP Pro (SP3 i used). But soon as i try in Windows 7 (tried Ultimate and Home Premium) i get a -1603 Fatal Error during installation...Windows Installer Help (MSI.chm) or MSDN for more info.... Dying to fix this... [Edit] I think error occurs when trying to create the Application in the IIS. [FIXED] Enable 32 Bit Apllications needs to be true when creating Application Pools through InstallShield in a 64 bit OS!

    Read the article

  • Does the Win XP/7 dual boot "missing restore points" problem apply to systems with separate hard disks for each O/S?

    - by Robert Oschler
    I'm in the process of installing Windows 7/64 on a system with Windows XP/32 on it. During my research, I read about a problem that occurs in the dual boot scenario where Windows XP deletes Windows 7's restore points when it accesses the Windows 7 volume: http://support.microsoft.com/kb/926185 I found a workaround but it seems pretty painful since it appears to involve using the registry to make the Windows 7 volume appear invisible or "offline" to Windows XP, making sharing disk data between the two O/S annoying since you have to use something like an external storage device to get it done: http://www.vistax64.com/tutorials/127417-system-restore-points-stop-xp-dual-boot-delete.html I was wondering if this problem only occurs with systems that have both O/S installed on the same physical hard drive (in different partitions)? In my case, I will have each O/S on a completely separate physical hard drive. Any other tips would be appreciated. -- roschler

    Read the article

  • Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

    - by Archit Baweja
    Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

    Read the article

  • Can't connect disk management to remote XP PC from local Win7/Server 2008

    - by Grez
    Scenario as follows: support technicians using Windows 7 PC's or Server 2008 terminal server are unable to connect Disk Management MMC snap in to a remote PC when the remote device is running Windows XP. "Disk management could not start Virtual Disk Service (VDS) on ". This can happen if the remote computer does not support VDS, or if a connection cannot be established because it was blocked by Windows Firewall." Connecting from another XP machine or 2003 server to the same XP machines works fine. Even connecting from XP/2003 to the Win7 or 2008 server works fine. Windows firewall disabled on all devices. I'm guessing this is something to do with the fact that XP uses logical disk manager service whereas Win7/2008 use Virtual disk manager service. But there doesn't seem to be any way to use logical disk manager service from 7/2008 to connect to XP...

    Read the article

  • Windows Server Backup - Can I restore to a particular revision?

    - by hamlin11
    I'm using Windows Server Backup in Windows Server 2008 to do a scheduled daily backup to a dedicated hard-drive on the server. I noticed that under "All backups" it says I have 45 copies. Does this mean that I can restore to any revision of my data upon system failure? If the answer is yes, then I don't have to worry about taking monthly or weekly snapshots of my data. I'm concerned about a data corruption event occurring that working its way into my backups... then not having a clean snapshot to go back to. Thanks!

    Read the article

  • Appearance of a WPF ListView under Windows Vista and Windows XP is not the same

    - by rem
    In a WPF application I have a ListView: <ListView Name="ItemSelList" ItemsSource="{Binding ItemColl}" SelectionChanged="ItemSelList_SelectionChanged"> <ListView.View> <GridView> <GridViewColumn Header="Date" Width="90" DisplayMemberBinding="{Binding Date}"/> <GridViewColumn Header="Time" Width="90" DisplayMemberBinding="{Binding Time}"/> <GridViewColumn Header="Description" Width="250" DisplayMemberBinding="{Binding Description}"/> </GridView> </ListView.View> </ListView> When running application under Windows Vista, everything is OK. When running under Windows XP - the default font size of ListView's rows is too small and rows of the ListView don't change color when user hovers with a mouse over them. How to do so that ListView appearance under Windows XP is the same as under Vista?

    Read the article

  • Windows 7, file properties, date modified, how do you show seconds?

    - by Jordan Weinstein
    Anyone know a way to immediately show the seconds of a file's date modified property in the GUI? So if you create a file, any file in any directory, right-click and choose Properties, the date modified (if it's recent) will say something like "dd/mm/yyy hh:mm, one minute ago" - reminder this is in Windows 7. Windows XP did it normally. Then they changed something. If you wait a while, eventually you'll see the seconds, I'm not sure how long a while is, but this is incredibly annoying if you want to troubleshoot something that relies on the seconds of timestamps... is there a setting? registry key I can change perhaps? I'm literally using Chrome, pasting in the path of the directory to be able to see the seconds quickly (as a workaround) but would be nice to be able to use Win7.

    Read the article

  • How to remove settings from a Microsoft Account Windows 8?

    - by Stevie G
    When installing windows 8 for the first time, I did not create a microsoft account and just installed as the local user. However I recently updated to Windows 8.1 and it forces you to use a microsoft account. I did not want to create an account so one of my friends used his and I logged in. After logging in all the friend's details like apps, wallpaper, lock screen, search mechanism, when I use search i see the friends facebook friends popping up. it is really annoying. How can I remove all of this excess, as I have logged out of the microsoft account and am just using local user but these problems have persisted. Thanks

    Read the article

  • Windows Device Emulator V3, windows 7 + Network

    - by Petoj
    Well im debugging a windows CE application from visual studio in the Windows Device Emulator, now to setup the network i go to File - Configure - Network, i enable a network card and press OK, then i get this message: "The required Virtual Machine Network Driver could not be found. Make sure that Virtual PC 2007 is installed. You can install Virtual PC 2007 from http://go.microsoft.com/fwlink/?linkid=46859" Im running windows 7 and got a built-in Virtual pc and i would rather not have 2 installed at the same time is there any way to get this network driver without installing virtual PC 2007?

    Read the article

  • How do I compile for windows XP under windows 7 / visual studio 2008

    - by Jon Cage
    I'm running Windows 7 and Visual Studio 2008 Pro and trying to get my application to work on Windows XP SP3. It's a really minimal command line program so should have any ridiculous dependencies: // XPBuild.cpp : Defines the entry point for the console application. // #include "stdafx.h" int _tmain(int argc, _TCHAR* argv[]) { printf("Hello world"); getchar(); return 0; } I read somewhere that defining several constants such as WINVER should allow me to compile for other platforms. I've tried the added the following to my /D compiler options: ;WINVER=0x0501;_WIN32_WINNT 0x0501;NTDDI_VERSION=NTDDI_WINXP But that made no difference. When I run it on my Windows XP machine (actually running in a virtualbox) I get the following error: This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. So what have I missed? Is there something else required to run MSVC compiled programs or a different compiler option or something else?

    Read the article

  • Windows 7, file properties, date modified, how do you show seconds?

    - by Jordan W.
    Anyone know a way to immediately show the seconds of a file's date modified property in the GUI? So if you create a file, any file in any directory, right-click and choose Properties, the date modified (if it's recent) will say something like "dd/mm/yyy hh:mm, one minute ago" - reminder this is in Windows 7. Windows XP did it normally. Then they changed something. If you wait a while, eventually you'll see the seconds, I'm not sure how long a while is, but this is incredibly annoying if you want to troubleshoot something that relies on the seconds of timestamps... is there a setting? registry key I can change perhaps? I'm literally using Chrome, pasting in the path of the directory to be able to see the seconds quickly (as a workaround) but would be nice to be able to use Win7.

    Read the article

  • Change The Windows 7 Start Orb the Easy Way

    - by Matthew Guay
    Want to make your Windows 7 PC even more unique and personalized?  Then check out this easy guide on how to change your start orb in Windows 7. Getting Started First, download the free Windows 7 Start Button Changer (link below), and extract the contents of the folder.  It contains the app along with a selection of alternate start button orbs you can try out.   Before changing the start button, we advise creating a system restore point in case anything goes wrong.  Enter System Restore in your Start menu search, and select “Create a restore point”. Please note:  We tested this on both the 32 bit and 64 bit editions of Windows 7, and didn’t encounter any problems or stability issues.  That said, it is always prudent to make a restore point just in case a problem did happen. Click the Create button… Then enter a name for the restore point, and click Create. Changing the Start Orb. Once this is finished, run the Windows 7 Start Button Changer as administrator by right-clicking on it and selecting “Run as administrator”.  Accept the UAC prompt that will appear. If you don’t run it as an administrator, you may see the following warning.  Click Quit, and then run again as administrator. You should now see the Windows 7 Start Button Changer.  On the left it shows what your current (default) start orb looks like inactive, when hovered over, and when selected.  Click the orb on the right to select a new start button. Here we browsed to the sample orbs folder, and selected one of them.  Let’s give Windows the Media Center orb for a start orb.  Click the orb you want, and then select open. When you click Open, your screen will momentarily freeze and your taskbar will disappear.  When it reappears, your computer will have gone from having the old, default Start orb style… …to your new, exciting Start orb!  Here it is default, and glowing when hovered over. Now, the Windows 7 Start Orb Changer will change, and show your new Start orb on the left side.  If you would like to revert to the default orb, simply click the folder icon to restore it.  Or, if you would like to change the orb again, restore the original first and then select a new one. The orbs don’t have to be round; here’s a fancy Windows 7 logo as the start button. The start orb change will work in the Aero and Aero basic (which Windows 7 Start uses) themes, but will not show up in the classic, Windows 2000 style themes.  Here’s how the new start button looks with the Aero Classic theme: There are tons of orbs available, including this cute smiley, so choose one that you like to make your computer uniquely yours. Conclusion This is a cute way to make your desktop unique, and can be a great way to make a truly personalized theme.  Let us know your favorite Start orb! Link Download the Windows 7 Start Button Changer Find more Start orbs at deviantART Similar Articles Productive Geek Tips Change the Windows 7 or Vista Power Buttons to Shut Down/Sleep/HibernateQuick Tip: Change the Registered Owner in WindowsSpeed up Windows Vista Start Menu Search By Limiting ResultsWhy Does My Password Expire in Windows?Change Your Computer Name in Windows 7 or Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition

    Read the article

  • Outlook express under RHEL 5 server

    - by Kumar P
    I am using RHEL 5 server as proxy server in Local network. Under server i have few windows machines. Now i want to configure Outlook express in windows boxes, When i configure and test connections, It showing connection failed. In browser, internet working well. Without proxy, windows outlook express configure well in windows boxes. And working well. What you think about it and How can i solve this problem ?

    Read the article

  • Windows Server 2003 W3SVC Failing, Brute Force attack possibly the cause

    - by Roaders
    This week my website has disappeared twice for no apparent reason. I logged onto my server (Windows Server 2003 Service Pack 2) and restarted the World Web Publishing service, website still down. I tried restarting a few other services like DNS and Cold Fusion and the website was still down. In the end I restarted the server and the website reappeared. Last night the website went down again. This time I logged on and looked at the event log. SCARY STUFF! There were hundreds of these: Event Type: Information Event Source: TermService Event Category: None Event ID: 1012 Date: 30/01/2012 Time: 15:25:12 User: N/A Computer: SERVER51338 Description: Remote session from client name a exceeded the maximum allowed failed logon attempts. The session was forcibly terminated. At a frequency of around 3 -5 a minute. At about the time my website died there was one of these: Event Type: Information Event Source: W3SVC Event Category: None Event ID: 1074 Date: 30/01/2012 Time: 19:36:14 User: N/A Computer: SERVER51338 Description: A worker process with process id of '6308' serving application pool 'DefaultAppPool' has requested a recycle because the worker process reached its allowed processing time limit. Which is obviously what killed the web service. There were then a few of these: Event Type: Error Event Source: TermDD Event Category: None Event ID: 50 Date: 30/01/2012 Time: 20:32:51 User: N/A Computer: SERVER51338 Description: The RDP protocol component "DATA ENCRYPTION" detected an error in the protocol stream and has disconnected the client. Data: 0000: 00 00 04 00 02 00 52 00 ......R. 0008: 00 00 00 00 32 00 0a c0 ....2..À 0010: 00 00 00 00 32 00 0a c0 ....2..À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 92 01 00 00 ... With no more of the first error type. I am concerned that someone is trying to brute force their way into my server. I have disabled all the accounts apart from the IIS ones and Administrator (which I have renamed). I have also changed the password to an even more secure one. I don't know why this brute force attack caused the webservice to stop and I don't know why restarting the service didn't fix the problem. What should I do to make sure my server is secure and what should I do to make sure the webserver doesn't go down any more? Thanks.

    Read the article

  • OpenVPN bridged not pinging beyond openvpn server on Ubuntu/Windows 2003

    - by ani
    I set up an OpenVPN server using Ubuntu and a windows server 2003 client to interconnect two networks between two different offices. They can now ping each other, but the rest of the network cannot be contacted by the windows client. Office 1 has internal network of: 192.168.0.0 255.255.240.0 Office 2 has internal network of: 192.168.16.0 255.255.255.0 And the configuration files are: Server.conf port 1194 --script-security 2 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" # TCP or UDP server? ;proto tcp proto udp dev tap0 ;dev tun ca ca.crt cert openvpn.crt key openvpn.key dh dh1024.pem ifconfig-pool-persist ipp.txt server-bridge 192.168.0.59 255.255.240.0 192.168.6.72 192.168.6.75 push "route 192.168.0.0 255.255.240.0" push "dhcp-option DNS 192.168.0.2" push "dhcp-option DOMAIN testeers.local" keepalive 10 120 tls-auth ta.key 0 # This file is secret comp-lzo user nobody group nogroup persist-key persist-tun log /var/log/openvpn/openvpn.log status /var/log/openvpn-status.log verb 3 Client Config file client dev tap ;dev tun --script-security 2 ;proto tcp proto udp remote 1xx.2xx.xxx.124 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert admin-VAIO.crt key admin-VAIO.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 Ifconfig on the server now shows the following: br0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 inet addr:192.168.0.59 Bcast:192.168.15.255 Mask:255.255.240.0 inet6 addr: fe80::250:56ff:fe8b:1a49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1081860 errors:0 dropped:1358 overruns:0 frame:0 TX packets:242385 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:76600615 (76.6 MB) TX bytes:64474575 (64.4 MB) eth0 Link encap:Ethernet HWaddr 00:50:56:8b:1a:49 UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:1144125 errors:0 dropped:7172 overruns:0 frame:0 TX packets:252486 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:109893729 (109.8 MB) TX bytes:66372620 (66.3 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:67865 errors:0 dropped:0 overruns:0 frame:0 TX packets:67865 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5183276 (5.1 MB) TX bytes:5183276 (5.1 MB) tap0 Link encap:Ethernet HWaddr 32:4f:42:11:b7:c5 inet6 addr: fe80::304f:42ff:fe11:b7c5/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:3329 errors:0 dropped:0 overruns:0 frame:0 TX packets:215472 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:373205 (373.2 KB) TX bytes:17465832 (17.4 MB)

    Read the article

  • Put one monitor of a dual monitor windows system into standby

    - by Psycogeek
    Standby not Disabled! When running 2 monitors on windows 7 or Windows XP, I would like to be able to put one of the monitors at a time into standby. The method can be manual. When running 2 monitors , the second monitor is not always needed, shutting off the monitors own power switch will turn off the monitor, that does work Ok. Problems with that are , the delay with the monitor logo at turn on, and the power switch is not very accessable, and the switch might not live forever turning it on and off so many times. Using disable methods like devcon, WIN-P and Display, causes all the windows to properly move to the other monitor. While that is what a person would want to happen so they can get hold of the windows, that is not what I want to happen, and some things on the other monitor have to be re-arranged after a re-enable. By putting it into standby mode, nothing changes other than the monitor going into standby. Disconnecting the DVI cable still can cause the system to (properly) shift all the windows over to the one monitor, just like any of the disable methods do. That makes a mess of the windows, and is so unacceptable, that I would prefer to leave the monitor on, wasting power and the hardware, when it could easily go into standby for some time. For both monitors I am using a "MonitorOff" program that puts both monitors into standby, but I can not find a utility that will put only ONE monitor into standby for the windows system. If someone comes along and suggests "ultramon" you must know for a fact that it will put One of either of the monitors into actual standby. And it does not really suit me to use ultramon, I tested it (it was nice) and I did not feel that it was a program I wanted. The 2 monitors are running off of an ATI 4890 card, they are both hooked up DVI-I, the OS is both Windows 7 (primary) and Windows XP. In addition it would also be interesting to have seperate standby activity timers, and follow mouse kind of standby changes, but any manuel method , shortcut, batch , tray, or gadget kind of operation would be a good start.

    Read the article

  • How to create Windows Vista/Windows 7 Startup disk or Rescue disk or system restore points on a CD?

    - by goldenmean
    Hello, I have two laptops, one having Windows-Vista home premium and other one having Windows-7 professional. Both versions of OS are OEM installs(pre-installed when I bought the laptop) and I do not have the Windows Installation disks for them. usually the installation disks provide a repair option in case one needs to repair/rescue a improper windows installation. But since I dont have the installation disks, I want to create rescue disks/startup disks for these. My questions are : 1] How to create a system rescue disk/startup disk on a CD from these two versions of Windows? 2] Doesn't the system restore points which Vista/Windows-7 create, cannot be created on a CD disk instead of hard-disk? 3] If I have a manual backup of my windows registry, in which I have exported all the registry to a file and I have that file on a CD, how to restore that registry back to the windows installation which might not be booting up properly due to bad registry problem. EDIT: 4]Is there any way to use these system restore points directly during bootup of the laptop, if windows does cannot boot properly due to problem. First laptop is HP Pavillion dv6646 and second one is Sony VAIO VCPEE series. thank you. -AD

    Read the article

  • Blank list of windows services

    - by Joe
    Recently when I open windows services (always as administrator) I get a blank list of services: When I try and click on one of the empty lines I get this "Script Error" message: This happens over and over again, after several times I restarted my computer. I can't pinpoint exactly when this started happening or if I made any specific changes to my computer at that time. Someone told my to try running scf /scannow as administrator, but when I try to do that the scan stops at 34% and I get the message: "Windows Resource Protection could not perform the requested operation." I am running Windows 7 Enterprise 64 bit, and I would really like to avoid reinstalling windows. Does anyone know how to fix this? Edit - Here is another attempt I made and some more information that might help: Following WhoIsRich's suggestion, I tried the command sfc /scannow /offbootdir=c:\ /offwindir=c:\windows. This gave the error message "The arguments passed to sfc are invalid. The offline windows directory specified points to the online system", and then I realized this command is meant to be run after booting from another system. Since I don't have my windows installation disk right now, I used my own system to create a recovery disk, and then restarted my computer and used the recovery disk to boot. I then ran the above command, and I got the following message: "Windows Resource Protection found corrupt files but was unable to fix some of them. Details are included in the CBS.log". I then restarted my computer and let it boot up normally. The problem with windows services persists, and the CBS.log file is a long log file with many entries, and I don't know if there is useful information in it, and if there is, how to find it.

    Read the article

  • Why does Windows 7 have three system partitions?

    - by Ben
    I am using Windows 7, and I wanted to make a System image (using Windows 7), but Windows 7 checked three partitions as System (100 MB + C (install partition) + D (my partition for my files, all programs are installed at C)). I don't want to backup my D partition, but that is not really the point. I don't want Windows messing with my other partitions and making them system. Is there a way to limit Windows 7 just to partition C (install partition)? If there is no way to stop Windows from making other partitions system, can I at least delete the files that make partition D system? PS: All these three partitions are on one physical disk, partitions from other disks aren't treated as System. FACTS: desktop PC, no OEM partitions, I personally have installed Windows 7 (many times) on the C partition. Why is my D partition checked as System partition when I try to create a System Image (using Windows 7 Ultimate built in tool), even though Windows (and all the software) are installed on the C partition? Is there a way to make D "normal" or non-system partition? Here is a picture of how it looks like if I try to create a system image. Once again, why is D also a system partition?

    Read the article

  • How to remove Media Center from Windows 8

    - by Arabella
    I bought 2 Windows 8 upgrades, 1 for my PC and 1 for my notebook. I added Windows Media Center to my notebook using the free offer in November (side note: the key was emailed to me within 5 minutes, I see many people have been complaining that it takes a few days). Today I decided to add WMC to my PC as well, so I went onto the Microsoft website, same like last time, and I received the email within a few minutes. Once I added WMC, entered the key and the computer rebooted, my activation is now broken: This product key is already being used on another PC. Try a different key or buy a new one. After rereading the product key email, I realised that the WMC key was exactly the same as the one I had received in November for my notebook (I used the same email, i.e. my Microsoft account Outlook email, for both). I didn't think this would be a problem, as on Microsoft's feature pack page it states: ...is limited to five licenses per customer per promotion. So then I decided, I'll just remove WMC from my PC and go back to Windows 8 Pro. So I turned off the WMC feature, PC restarted, activation still broken because my key has been replaced. I then tried to activate it with my original Pro key. The error it gave was that this key cannot be used with this version of Windows, as it is now Windows 8 Pro with Media Center and not Windows 8 Pro anymore. I've searched a bit and it seems the only way to remove it is do a clean install. I tried the Windows 8 Downgrade Helper, which told me I was already running Win 8 Pro when I tried to downgrade, and that I was running Win 8 Pro with Media center when I tried the other option. To sum up: How do I remove Windows Media Center from Windows 8 Pro without having to do a clean install?

    Read the article

  • Running on Windows CE 6 'and' Windows XP

    - by Psychic
    Is it possible to create a small program that will run, without recompiling and without emulators, on both Windows CE 6 AND Windows XP SP3? From my knowledge, this isn't possible. Source code needs to be recompiled for the target platform. However, a hardware manufacturer for embedded boards is claiming otherwise. The application isn't anything complex, just a simple benchmarking tool analysing floating point operations, CPU ticks etc, and displaying the results on a plain GUI.

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >