Search Results

Search found 3469 results on 139 pages for 'broken harddrive'.

Page 82/139 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Why does my browser take me to Scour.com? (redirect virus)

  - by Paula DiTallo

  The "scour" or Rootkit.Win32.TDSS virus has a long history which can be found here: http://en.wikipedia.org/wiki/Scour Here is the primary symptom: after searching for something in your web browser using google, one of the results that you click on redirects you to scour.com. If you've executed ClamWin, Malwarebytes, McAfee, Norton, etc. to find and isolate the virus without any luck--this isn't really a surprise, since this virus attaches to existing system drivers. I only know of one reliable package that will remove this without ill effects--like adding new spyware. This package is called TDSSKiller. I have seen multiple websites that claim to have this software available, but the one that I know is reliable is located here: http://support.kaspersky.com/viruses/solutions?qid=208280684 Once you go to Kaspersky's tech support site, the TDSSKiller zip file is available for downloading. When you execute this software, you will be able to "cure" or repair the infected driver. Remember to jot down the name of the driver for future reference--should you need to reinstall the driver from a "same-as" working computer, or your install disk if the repair is ineffective. The driver that happened to get infected on my computer was the tcpip.sys driver. This caused my win sockets to loose their ip addresses. In most other instances, less critical drivers such as HDAudBus.sys are infected. In my case, I was not through correcting my computer problems until I corrected the broken WinSock issue and loaded an earlier version of the tcpip.sys driver from: C:\WINDOWS\ServicePackFiles\i386 which I placed in: C:\WINDOWS\system32\drivers Don't forget to reboot your computer after your repair! Once you download TDSSKiller and cure/repair your infected driver(s), the redirect on google searches should disappear .

  Read the article

• Cannot move/drag/drop windows/items in remote VNC session

  - by hansioux

  I find it a little hard to believe that no one here has asked this question, I tried searching for it but it isn't asked, so here goes: I setup a Ubuntu desktop computer with VNC to use as a server. And use another Ubuntu desktop computer to VNC into it. The rest of the VNC works ok, but drag and drop with mouse is gone. Thus I can not move windows, or drag and drop items via VNC. I am using the default remote desktop in System - Preferences to setup my server. And use Remmina as my client. The same happens using MS Windows's VNC clients connecting to my Ubuntu desktop. I did a bit of searching on google, and there are actually a lot of reports regarding this issue. But, oddly there is no solution. There are even bug reports made for this since Ubuntu 9.10, yet here it still is in Ubuntu 11.04. There have been suggestions that the bugs is in gtk, as see in link below: http://ubuntuforums.org/showthread.php?t=1497635&page=2 libgtk2.0-0 stable(lenny) -> DnD works libgtk2.0-0 lenny-backport (libgtk2.0-0_2.18.6-1~bpo50+1_i386) -> DnD still works libgtk2.0-0 testing (libgtk2.0-0_2.20.1-2_i386) -> DnD broken please don't give answers such as "use NX", "use ssh -x" or "use x11vnc". I am aware that some people don't have this problem with x11vnc, and I have setup x11vnc before, but i can't for this setup. I am setting this up so Windows only friends/families can use it.

  Read the article

• Moving from Silverlight 4 Beta to RC - Part 2

  In my previous post I talked about updating my development environment from Silverlight 4 Beta to Silverlight 4 RC (release candidate). After updating, I opened the solution for my Task-It project and found that several things were broken. I would've been surprised if it just worked as is! What disappointed me is that after spending a decent amount of time searching the web, I could not find information telling me what I needed to update/change...and wouldn't it be nice if there was a wizard to update it for you? What changed? I wish I had made notes along the line of each of the things I found, but here are a few that I can recall: In the Web project, the following dll's no longer exist: System.Web.DomainServices.dll System.Web.DomainServices.LinqToSql.dll (if you are using the Entity Framework I believe that one is System.Web.DomainServices.EntityFramework.dll) System.Web.Ria.dll In the Silverlight project: System.Windows.Ria.dll I'm not positive which new assemblies need to be referenced for your project, but I'm going to list the ones I think you need. One way to verify is to create a new Silverlight application with support for WCF RIA Services and see which dlls are included. In the Web project: System.Data.Entity.dll System.ServiceModel.DomainServices.EntityFramework.dll (I've moved from LinqToSql to EntityFramework, so I'm not sure which one the LinqToSql stuff comes from) System.ServiceModel.DomainServices.Hosting.dll System.ServiceModel.DomainServices.Server.dll In the Silverlight project: System.ServiceModel.DomainServices.Client.dll System.ServiceModel.DomainServices.Client.Web.dll System.ServiceModel.Web.Extensions.dll Where are these dll's? These all live in either the Silverlight or RIA Services subdirectories under:         C:\Program Files\Microsoft SDKs Of if you are on a 64-bit machine like me:         C:\Program Files (x86)\Microsoft SDKs Wrap up Good luck, and I hope this helps to get you back in business! If anyone finds anything that I've missed, please enter a comment and I'll update the post accordingly.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• CodePlex Daily Summary for Saturday, May 24, 2014

  CodePlex Daily Summary for Saturday, May 24, 2014Popular ReleasesSimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"C64 Studio: 3.5: Add: BASIC renumber function Add: !PET pseudo op Add: elseif for !if, } else { pseudo op Add: !TRACE pseudo op Add: Watches are saved/restored with a solution Add: Ctrl-A works now in export assembly controls Add: Preliminary graphic import dialog (not fully functional yet) Add: range and block selection in sprite/charset editor (Shift-Click = range, Alt-Click = block) Fix: Expression evaluator could miscalculate when both division and multiplication were in an expression without parenthesisSEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...Compile Mono With Visual Studio: 0.9 Beta 1 Release: exciting 0.9 Beta Release ( 0.9.0.2 )PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.com????: 《????》: 《????》（c???）??“????”???????，???????????????C?????????。???????,???????????????????????. ??????????????????????????????????；????????????????????????????。Mini SQL Query: Mini SQL Query (1.0.72.457): Apologies for the previous update! FK issue fixed and also a template data cache issue.Wsus Package Publisher: Release v1.3.1405.17: Add Russian translation (thanks to VSharmanov) Fix a bug that make WPP to crash if the user click on "Connect/Reload" while the Report Tab is loading. Enhance the way WPP store the password for remote computers command.MoreTerra (Terraria World Viewer): More Terra 1.12.9: =========== = Compatibility = =========== Updated to account for new format 1.2.4.1 =========== = Issues = =========== all items have not been added. Some colors for new tiles may be off. I wanted to get this out so people have a usable program.LINQ to Twitter: LINQ to Twitter v3.0.3: Supports .NET 4.5x, Windows Phone 8.x, Windows 8.x, Windows Azure, Xamarin.Android, and Xamarin.iOS. New features include Status/Lookup, Mute APIs, and bug fixes. 100% Twitter API v1.1 coverage, Async, Portable Class Library (PCL).CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.26.0: Added access to the Release Notes during 'Check for Updates...'' Debug panels Added support for generic types members Members are grouped into 'Raw View' and 'Non-Public members' categories Implemented dedicated (array-like) view for Lists and Dictionaries http://download-codeplex.sec.s-msft.com/Download?ProjectName=csscriptnpp&DownloadId=846498ClosedXML - The easy way to OpenXML: ClosedXML 0.70.0: A lot of fixes. See history.TBox - tool to make developer's life easier.: TBox 1.29: Bug fixing. Add LocalizationTool pluginYAXLib: Yet Another XML Serialization Library for the .NET Framework: YAXLib 2.13: Fixed a bug and added unit tests related to serializing path like aliases with one letter (e.g., './B'). Thanks go to CodeProject user B.O.B. for reporting this bug. Added `Bin/*.dll.mdb` to `.gitignore`. Fixed the issue with Indexer properties. Indexers must not be serialized/deserialized. YAXLib will ignore delegate (callback/function pointer) properties, so that the exception upon serializing them is prevented. Significant improve in cycling object reference detection Self Referr...SFDL.NET: SFDL.NET (2.2.9.2): Changelog: Neues Icon Xup.in CnL Plugin BugfixNew ProjectsA minimal UDP based logger: a minimal udp loggerApr-Jul-2014: Educational project for studying .NET and C#CliqSafe - Safe Email - An Add on for Microsoft Outlook & Windows Mobile Devices: CliqSafe - Safe Email - An Add on for Microsoft Outlook & Windows Mobile Devices:CodePlex Testing Project: Project for testing codeplex features.EF6: Project EF6electronixwebform: tesekkürü bir borc bilirizelektronix: tesekkuru bir borc bilirizI-Ching: This class can generate fortune telling phrases with the I-Ching book of changes.J-Processors: Various project to develop microprocessors based on FPGAs and a hardware decription language. Software environment for operation.Kart-Trie: Manage and search associative array with Kart tree.NewBreeze: NewBreeze - Fast and light-weight Qt4 based File ManagerOE Orchard Project: interactive educationPostal: Postal is a collection of open-source aspects for PostSharp.SoundCloud Downloader: SoundCloud Downloader for people who are searching for one!Ternary Search Tree: This class can insert and search text using ternary search trees.?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ???????????????????????,????,????“???、???、???”?????,?????,?????????????????。??????！ ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ???????2005?,????????????????????,??????????,??????。?????,???????????????????，??????！ ?????-?????【??】?????????: ???????????????:??????!?????!???:????、????、????、????。??,??????????!??????. ?? API C# ??: ??.NET，?? C# ????? API ????，????????? API。?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ????????????,????,?????、???、?????,???????,?????,???????????100%。??????！ ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ??????????????,????????????,????????,???,???????????,????,????。?????,??????. ?????-?????【??】?????????: ???????????????,??????,??????,??????、??????,??????、??，????，??????！ ?????-?????【??】?????????: ????????,???????????,??????????,????:??,????,???????? ??????????,????????。??????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。 ?????-?????【??】?????????: ???????????????????????,???????????,??????,??????????????...????????。??????！ ?????-?????【??】?????????: ?????????????????????,??????,???????????,????????????????,????????.??????. ?????-?????【??】?????????: ?????1992?,????????????????。??????????????????????。????????????,????，????????！ ?????-?????【??】?????????: ??????、??????????????????,???????.??????????,????????。

  Read the article

• Trouble installing Server 12.10 - Dead keyboard, Blank Screen, Network Config

  - by Mikey

  Installing 12.10 server from cd - minimal installation: basic system, ssh server,postgreSQL, manual updates. Hardware is brand new HP server that also runs Win 2003 Server Standard as a DNC excellently - I installed the grub boot manager on the primary partition and it is working fine - can boot to Win or Ubuntu without issue. Everything seemed to go OK on the installation - BUT when I restarted the system after install and booted to Ubuntu, I got the command prompt for Ubuntu, but the keyboard was UNREPSONSIVE - dead. There is nothing wrong with the keyboard - works fine if I boot to Win. With a completely unrepsonsive keyboard I had to hit the power switch - when I restarted and booted to Ubuntu, Ubuntu started but no command prompt came up at all - just black screen. I powered down and rebooted to advanced Ubuntu options - it tried to reinstall/initliaze a long list of packages - when it got to 'waiting for network configuration' it waited, then a message 'waiting 60 seconds for network configuration'... it waited 60 seconds and then I got a 'failed to configure network message' and it continued. Finally it finished, I hit enter and got to a prompt - but again, keyboard UNREPSONSIVE - dead. I went through this several times - tried 'repairing broken installation' option and also reinstalling entirely - always same results. I am flummoxed. The only clue I have is that for the Windows DNC config, the IP address is static - not via DHCP. But I don't think that should impact Ubuntu at all - perhaps I am mistaken. What is wrong?

  Read the article

• What can I do about rsync of large files killing my laptop's wifi connection

  - by David Dean

  When I run a rsync to backup my home folder over the network like so: rsync -avhz --progress --delete /home/dbdean/ [email protected]:/home/backups/david/ I seem to have problems with my quite large .VirtualBox/HardDisks/Windows XP.vdi file. Occasionally the wifi will silently fail (the transfer stops, and any other network access is broken). If I reconnect the wifi to my network before the transfer times out, it happily keeps going (and other network access is back), but I can't just leave it unattended most of the time, as I have to keep an eye on it. I'm guessing this is probably a bug in the wireless card related to a particularly high sustained volume of network usage, but I'm not really sure where to start with diagnosing this problem so that I can provide a good bug report. Or it could be something else, I guess. Any help would be appreciated. My network card is an Atheros Communications Inc. AR9285, as lspci -k shows: 43:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: Hewlett-Packard Company Device 3040 Kernel driver in use: ath9k Kernel modules: ath9k

  Read the article

• How to handle growing QA reporting requirements?

  - by Phillip Jackson

  Some Background: Our company is growing very quickly - in 3 years we've tripled in size and there are no signs of stopping any time soon. Our marketing department has expanded and our IT requirements have as well. When I first arrived everything was managed in Dreamweaver and Excel spreadsheets and we've worked hard to implement bug tracking, version control, continuous integration, and multi-stage deployment. It's been a long hard road, and now we need to get more organized. The Problem at Hand: Management would like to track, per-developer, who is generating the most issues at the QA stage (post unit testing, regression, and post-production issues specifically). This becomes a fine balance because many issues can't be reported granularly (e.g. per-url or per-"page") but yet that's how Management would like reporting to be broken down. Further, severity has to be taken into account. We have drafted standards for each of these areas specific to our environment. Developers don't want to be nicked for 100+ instances of an issue if it was a problem with an include or inheritance... I had a suggestion to "score" bugs based on severity... but nobody likes that. We can't enter issues for every individual module affected by a global issue. [UPDATED] The Actual Questions: How do medium sized businesses and code shops handle bug tracking, reporting, and providing useful metrics to management? What kinds of KPIs are better metrics for employee performance? What is the most common way to provide per-developer reporting as far as time-to-close, reopens, etc.? Do large enterprises ignore the efforts of the individuals and rather focus on the team? Some other questions: Is this too granular of reporting? Is this considered 'blame culture'? If you were the developer working in this environment, what would you define as a measureable goal for this year to track your progress, with the reward of achieving the goal a bonus?

  Read the article

• MEncoder Install on Ubuntu

  - by Tauqeer Ahmad

  I am writing this after checking almost all the posts but none of those solved my problem. I am trying to install mencoder to process some videos but there are strange errors coming. For examples when I try sudo apt-get install mencoder the following errors comes out: Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: mencoder : Depends: mplayer Depends: libasound2 (> 1.0.24.1) Depends: libavcodec53 (>= 4:0.8~beta2-2) but it is not installable or libavcodec-extra-53 (>= 4:0.8~beta2-2) but it is not going to be installed Depends: libavformat53 (>= 4:0.8~beta2-2) but it is not installable or libavformat-extra-53 (>= 4:0.8~beta2-2) but it is not going to be installed Depends: libcdparanoia0 (>= 3.10.2+debian) but it is not installable Depends: libenca0 (>= 1.9) but it is not installable Depends: libfontconfig1 (>= 2.8.0) but it is not installable Depends: libgif4 (>= 4.1.4) but it is not installable Depends: libjpeg8 (>= 8c) but it is not installable Depends: liblzo2-2 but it is not installable Depends: libsmbclient (>= 3.0.24) but it is not installable Depends: libspeex1 (>= 1.2~beta3-1) but it is not installable Depends: libtheora0 (>= 1.0) but it is not installable E: Unable to correct problems, you have held broken packages. Can anyone help to solve this issue. I tried to find static builds of MEncoder but could not.

  Read the article

• Ignore Partial Upgrade -- Google Earth Dependencies

  - by pyraz

  I'm running a 64-bit install of Xubuntu 12.04. It took me a little while to get Google Earth working. The 64-bit Google earth package requires some 32-bit gtk libraries provided by ia32-libs. However, when I ran a simulation to install ia32-libs and it's dependencies, it wanted to remove a ton of programs, including the xubuntu-desktop meta-package. As a work-around, I used getlibs to get the 32-bit libraries I needed, and then installed Google Earth with the deb package and the --ignore-depend option to dpkg. Awesome, Google Earth is installed and is working great! Now, however, Update Manager keeps complaining about a "Partial Upgrade", and apt-get won't let me install any new applications. It wants me to do a fix-broken install, but when I do a simulation of apt-get -f install I get some very bad news, they want to uninstall the Google Earth I just worked so hard to install! $> apt-get -f -s install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following packages will be REMOVED: googleearth 0 upgraded, 0 newly installed, 1 to remove and 0 not upgraded. Remv googleearth [6.0.3.2197+0.7.0-1] TL;DR The --ignore-depends passed to dpkg is not propagating to apt-get, so now I can't install any new applications until I uninstall Google Earth, because of it's missing dependencies (even though it works fine without them). How can I fix this?

  Read the article

• A lot has happened since last post!!!!!!!!!

  - by Ratman21

  And I mean a lot! First off had two interviews (one was selling insurance) and other installing cable. I have more hope for the cable one. Getting more emails from my job search engines (having problems with going through them and applying for those jobs, I know I can do). It seems the more I apply to, the more job emails pop up in my in box. But at the same time I am fighting feelings of worthlessness (18 months and no job). It is putting a strain on my marriage (We had had blow out over a broken drinking glass since I last posted).     But, at the same time, I am fighting mad about (a figure of speech, really) not having a job. Look just because I am over 55 and have gray hair. It does not mean, my brain is dead or I can not longer trouble shoot a router or circuit or LAN issue. Or that I can do “IT” work at all. And I could prove this if; some one would give me at job. Come on try me for 90 days at min. wage.   I know you will end up keeping me (hope fully at normal pay) around. Is any one hearing me…come on take up the challenge!

  Read the article

• Xubuntu 12.04 : Random boot to black screen

  - by Thibaud Ruelle

  My xubuntu 12.04 has worked flawlessly since install in September. However, lately I randomly have the following boot issue : The computer boots to grub, and after choosing xubuntu either boots normally or boots to a black screen. Here are some observations I have made : The black screen seems to happen randomly. The black screen does not seem to happen in safe mode (- nomodeset in grub). The black screen does not allow me to ctrl + alt + F1-6 into a terminal. The black screen allows me to use SysRq keys (Alt + SysRq + K does not work though). The black screen often happens on first boot in several hours and the computer usually boots normally after a RSEINUB. When the computer boots I get "SP5100 TCO timer: mmio address 0xfec000f0 already in use" at startup and "Could not write bytes: broken pipe" at shutdown. However research on these errors did not yield answers to my particular issue. Comparing Xorg.0.log (successful boot) and Xorg.0.log.old (black screen), and reading the answers to similar problem, it seems that I might have a X driver issue. However the system worked flawlessly since lately. Additional info on my system : ACER AO722 C62kk Operating system : 3.2.0-31-generic ubuntu Edit : I made a fresh install of Xubuntu 12.04 x64, the issue is still there ... (I have a separate /home so config. files were not erased). Edit 2 : I followed troubleshooting blank screen, so my new observations are without quiet and splash in grub : When the system boots normally, the screen goes black after grub then lights up and displays text information then goes to login screen. (After that the desktop starting time vary substantially, which is new and may be a separate issue ?). When the boot fails, after grub the screen goes black, lights up, goes black, lights up again and most times goes black again. At this point it responds to Alt+SysReq K by lighting up but no more, and has to be rebooted through Alt+SysReq+ RSEINUB. Thank you for your time and attention in advance ! Thibaud Ruelle

  Read the article

• Unable to install Dockmanager

  - by Mark Rooney

  I have Docky installed on Ubuntu 10.10 64bit and noticed after a recent upgrade my 'Helpers' are no longer available. After some research I found that Dockmanager is no longer installed either. I am unable to install it via the Software centre or via terminal using apt-get, the following error is returned; mark@Sonata:~$ sudo apt-get install dockmanager Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed: dockmanager 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/94.4kB of archives. After this operation, 430kB of additional disk space will be used. (Reading database ... 162015 files and directories currently installed.) Unpacking dockmanager (from .../dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb (--unpack): trying to overwrite '/usr/share/dockmanager/data/skype_invisible.svg', which is also in package faenza-icon-theme 0.8 dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/dockmanager_0.1.0~bzr83-0ubuntu1~10.10~dockers1_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) mark@Sonata:~$ Can anyone advise on how to fix this?

  Read the article

• Linux Mint Maya Freezes

  - by timuçin

  Linux Mint freezes after a couple of seconds the desktop loads, in a way that I have to shut the power in order to reboot; the mouse doesn't move, ctrl+alt+f1 doesn't do anything and I think even the hard disk stops. This doesn't happen every start but when it does happen, I have to start recovery mode and run the option "dpkg", the description is "repair broken packages" or something like that. If I don't do that and start the system normally the samething happens again. I have some clues that might help: The first time I installed Mint I had to install my wireless driver manualy. The system didn't freeze before this but since I installed the driver immediately after the Mint installation that might just easily be a coincidence. Even so after I discovered the dpkg trick, for the first couple of times I did it, I found my wireless driver uninstalled and I had to reinstall it. The thing is I can't be sure that the problem is my wireless driver because the relation is not direct enough. Still letting you know what my wireless apapter might help: Realtek L 8723 The next thing I am going to do is to wait until it happens again and post the system log here.

  Read the article

• Using the OAM Mobile & Social SDK to secure native mobile apps - Part 2 : OAM Mobile & Social Server configuration

  - by kanishkmahajan

  Objective  In the second part of this blog post I'll now cover configuration of OAM to secure our sample native apps developed using the iOS SDK. First, here are some key server side concepts: Application Profiles: An application profile is a logical representation of your application within OAM server. It could be a web (html/javascript) or native (iOS or Android) application. Applications may have different requirements for AuthN/AuthZ, and therefore each application that interacts with OAM Mobile & Social REST services must be uniquely defined. Service Providers: Service providers represent the back end services that are accessed by applications. With OAM Mobile & Social these services are in the areas of authentication, authorization and user profile access. A Service Provider then defines a type or class of service for authentication, authorization or user profiles. For example, the JWTAuthentication provider performs authentication and returns JWT (JSON Web Tokens) to the application. In contrast, the OAMAuthentication also provides authentication but uses OAM SSO tokens Service Profiles:  A Service Profile is a logical envelope that defines a service endpoint URL for a service provider for the OAM Mobile & Social Service. You can create multiple service profiles for a service provider to define token capabilities and service endpoints. Each service provider instance requires atleast one corresponding service profile.The  OAM Mobile & Social Service includes a pre-configured service profile for each pre-configured service provider. Service Domains: Service domains bind together application profiles and service profiles with an optional security handler. So now let's configure the OAM server. Additional details are in the OAM Documentation and this post simply provides an outline of configuration tasks required to configure OAM for securing native apps.  Configuration  Create The Application Profile Log on to the Oracle Access Management console and from System Configuration -> Mobile and Social -> Mobile Services, select "Create" under Application Profiles. You would do this  step twice - once for each of the native apps - AvitekInventory and AvitekScheduler. Enter the parameters for the new Application profile: Name:  The application name. In this example we use 'InventoryApp' for the AvitekInventory app and 'SchedulerApp' for the AvitekScheduler app. The application name configured here must match the application name in the settings for the deployed iOS application. BaseSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM server.  Mobile Configuration: Enable this checkbox for any mobile applications. This enables the SDK to collect and send Mobile specific attributes to the OAM server.  Webview: Controls the type of browser that the iOS application will use. The embedded browser (default) will render the browser within the application. External will use the system standalone browser. External can sometimes be preferable for debugging URLScheme: The URL scheme associated with the iOS apps that is also used as a custom URL scheme to register O/S handlers that will take control when OAM transfers control to device. For the AvitekInventory and the AvitekScheduler apps I used osa:// and client:// respectively. You set this scheme in Xcode while developing your iOS Apps under Info->URL Types.  Bundle Identifier : The fully qualified name of your iOS application. You typically set this when you create a new Xcode project or under General->Identity in Xcode. For the AvitekInventory and AvitekScheduler apps these were com.us.oracle.AvitekInventory and com.us.oracle.AvitekScheduler respectively.  Create The Service Domain Select create under Service domains. Create a name for your domain (AvitekDomain is what I've used). The name configured must match the service domain set in the iOS application settings. Under "Application Profile Selection" click the browse button. Choose the application profiles that you created in the previous step one by one. Set the InventoryApp as the SSO agent (with an automatic priority of 1) and the SchedulerApp as the SSO client. This associates these applications with this service domain and configures them in a 'circle of trust'.  Advance to the next page of the wizard to configure the services for this domain. For this example we will use the following services:  Authentication:   This will use the JWT (JSON Web Token) format authentication provider. The iOS application upon successful authentication will receive a signed JWT token from OAM Mobile & Social service. This token will be used in subsequent calls to OAM. Use 'MobileOAMAuthentication' here. Authorization:  The authorization provider. The SDK makes calls to this provider endpoint to obtain authorization decisions on resource requests. Use 'OAMAuthorization' here. User Profile Service:  This is the service that provides user profile services (attribute lookup, attribute modification). It can be any directory configured as a data source in OAM.  And that's it! We're done configuring our native apps. In the next section, let's look at some additional features that were mentioned in the earlier post that are automated by the SDK for the app developer i.e. these are areas that require no additional coding by the app developer when developing with the SDK as they only require server side configuration: Additional Configuration  Offline Authentication Select this option in the service domain configuration to allow users to log in and authenticate to the application locally. Clear the box to block users from authenticating locally. Strong Authentication By simply selecting the OAAMSecurityHandlerPlugin while configuring mobile related Service Domains, the OAM Mobile&Social service allows sophisticated device and client application registration logic as well as the advanced risk and fraud analysis logic found in OAAM to be applied to mobile authentication. Let's look at some scenarios where the OAAMSecurityHandlerPlugin gets used. First, when we configure OAM and OAAM to integrate together using the TAP scheme, then that integration kicks off by selecting the OAAMSecurityHandlerPlugin in the mobile service domain. This is how the mobile device is now prompted for KBA,OTP etc depending on the TAP scheme integration and the OAM users registered in the OAAM database. Second, when we configured the service domain, there were claim attributes there that are already pre-configured in OAM Mobile&Social service and we simply accepted the default values- these are the set of attributes that will be fetched from the device and passed to the server during registration/authentication as device profile attributes. When a mobile application requests a token through the Mobile Client SDK, the SDK logic will send the Device Profile attributes as a part of an HTTP request. This set of Device Profile attributes enhances security by creating an audit trail for devices that assists device identification. When the OAAM Security Plug-in is used, a particular combination of Device Profile attribute values is treated as a device finger print, known as the Digital Finger Print in the OAAM Administration Console. Each finger print is assigned a unique fingerprint number. Each OAAM session is associated with a finger print and the finger print makes it possible to log (and audit) the devices that are performing authentication and token acquisition. Finally, if the jail broken option is selected while configuring an application profile, the SDK detects a device is jail broken based on configured policy and if the OAAM handler is configured the plug-in can allow or block access to client device depending on the OAAM policy as well as detect blacklisted, lost or stolen devices and send a wipeout command that deletes all the mobile &social relevant data and blocks the device from future access. 1024x768 Social Logins Finally, let's complete this post by adding configuration to configure social logins for mobile applications. Although the Avitek sample apps do not demonstrate social logins this would be an ideal exercise for you based on the sample code provided in the earlier post. I'll cover the server side configuration here (with Facebook as an example) and you can retrofit the code to accommodate social logins by following the steps outlined in "Invoking Authentication Services" and add code in LoginViewController and maybe create a new delegate - AvitekRPDelegate based on the description in the previous post. So, here all you will need to do is configure an application profile for social login, configure a new service domain that uses the social login application profile, register the app on Facebook and finally configure the Facebook OAuth provider in OAM with those settings. Navigate to Mobile and Social, click on "Internet Identity Services" and create a new application profile. Here are the relevant parameters for the new application profile (-also we're not registering the social user in OAM with this configuration below, however that is a key feature as well): Name:  The application name. This must match the name of the of mobile application profile created for your application under Mobile Services. We used InventoryApp for this example. SharedSecret: Enter a password here. This does not need to match any existing password. It is used as an encryption key between the client and the OAM Mobile and Social service.  Mobile Application Return URL: After the Relying Party (social) login, the OAM Mobile & Social service will redirect to the iOS application using this URI. This is defined under Info->URL type and we used 'osa', so we define this here as 'osa://' Login Type: Choose to allow only internet identity authentication for this exercise. Authentication Service Endpoint : Make sure that /internetidentityauthentication is selected. Login to http://developers.facebook.com using your Facebook account and click on Apps and register the app as InventoryApp. Note that the consumer key and API secret gets generated automatically by the Facebook OAuth server. Navigate back to OAM and under Mobile and Social, click on "Internet Identity Services" and edit the Facebook OAuth Provider. Add the consumer key and API secret from the Facebook developers site to the Facebook OAuth Provider: Navigate to Mobile Services. Click on New to create a new service domain. In this example we call the domain "AvitekDomainRP". The type should be 'Mobile Application' and the application credential type 'User Token'. Add the application "InventoryApp" to the domain. Advance the next page of the wizard. Select the  default service profiles but ensure that the Authentication Service is set to 'InternetIdentityAuthentication'. Finish the creation of the service domain.

  Read the article

• SSL Certificate Works in Monit - But Not in Keystore

  - by Bart Silverstrim

  I have a situation where there's a keystore file with the various root/intermediate certificates stored in it in a way that it seems to work for most browsers. Problem is that when mobile browsers hit it, there's a break in the chain and they complain. I used an SSL checker at http://www.sslshopper.com/ssl-checker.html and it states that "The certificate is not trusted in all web browsers. You may need to install an Intermediate/chain certificate to link it to a trusted root certificate." So...the desktop browsers must have the intermediate certs already and can make the chain connections, I'm assuming, while the mobile browsers can't. The thing is that I had used Portecle to export certificates from the keystore and cobble them together to create a .PEM certificate to run the Monit utility. When I check that application with the SSL checker, it works fine! The person that originally created the keystore said he couldn't follow the SSL provider's directions for creating the keystore because he created the CSR request using openssl, so the cert and private key had to be converted to DER format and use importkey to get it to work; following the directions he found online had importkey seem to use only a set keystore file as a result, and it would erase anything already in the file if it existed. So is there a way to take the certificate I created for Monit and create a working keystore for the Tomcat website? What would be causing the chain to be broken in the current keystore, but work for Monit? I have the SSL cert provider's intermediate and cross certificates, and the website's certificate, but is what else would I need to create a working chain of certs for a keystore?

  Read the article

• Unity's gone! How do I get it back?

  - by Kelley

  Earlier today my Unity desktop disappeared: I got a black screen with white text, but it disappeared too quickly for me to read. When the desktop reappeared, it was the Ubuntu Classic desktop. I used $ unity --reset but that did not do anything. I tried rebooting so I could choose unity from the list when I logged in, but although there was Ubuntu choice, there was no unity listed (but classic was listed). I was able to install Unity 2D and am using that, but really want to get 3D back. I had been using Ubuntu without problems for several weeks when this happened. My graphics card is onboard a Dell Latitude desktop - a couple years old - and is reported as an Intel G33/G31. I've looked at other requests for help here, and tried suggestions when they seemed to relate to similar problems, but nothing seems to work so far. Any ideas? Thanks! This is part of the output of my latest attempt to run unity --reset Window manager warning: 0x3e01c35 () appears to be one of the offending windows with a timestamp of 1309472834. Working around... Window manager warning: last_user_time (1309473695) is greater than comparison timestamp (1126160). This most likely represents a buggy client sending inaccurate timestamps in messages such as _NET_ACTIVE_WINDOW. Trying to work around... Window manager warning: 0x4c0046c (mdk@Habane) appears to be one of the offending windows with a timestamp of 1309473695. Working around... Window manager warning: Received a NET_CURRENT_DESKTOP message from a broken (outdated) client who sent a 0 timestamp Window manager warning: Buggy client sent a _NET_ACTIVE_WINDOW message with a timestamp of 0 for 0x4c0046c (mdk@Habane) Window manager warning: meta_window_activate called by a pager with a 0 timestamp; the pager needs to be fixed.

  Read the article

• Ubuntu 12.04 LTS , Dell d410 output to External Monitor/TV with docking

  - by Gck

  I am not able to see the video output on My external monitor/TV after installing 12.04 LTS. I had the same issue with 11 versions also. This issue does not happen on 10.04 LTS version. This is my setup. Dell latitude D410 with Intel Mobile 915 GM/910GML express controller using the Dell docking station Connecting to my 42inch TV with DVI (from Docking) to HDMI cable (on TV) If i close the lid, some times i am able to see the video output on TV, but the resolution is making the fonts so small, i cannot even see it and when i click displays option to change the resolution, the output goes off completely and it is shown now on the laptop screen. one time, i got the output on both the screens, but i am not able to replicate that scenario even after trying the Fn+F8 key option on my laptop. earlier some time back when i ran version 11.x ubuntu, i was able to get the output on both the screens (basically mirrored output) with large font resolution on my TV using the monitor Test tool as mentioned here :http://www.bigfatostrich.com/2011/05/solved-ubuntu-11-04-broken-external-display/ The problem with this approach is that i have to do it every time i restart the machine and more over the video output is present on both the screens (mirrored), which is of no use. As i stated before, this does not happen with 10.04 LTS. With 10.04 LTS my laptop screen is off automatically and the output is seen on TV/external display. Can anyone share any options that i can try? How can we achieve the behavior of 10.04 LTS with respect to the External display on 12.04 LTS . Thankyou very much for your help in advance.

  Read the article

• WP E Commerce Safe Mode restriction error [on hold]

  - by Mustafa Kamal

  I have my online shop, created with WP Ecommerce getting broken after I moved it to another server. I could be sure that the problem comes from WP Ecommerce because when I disable that plugin. Everything run as expected. This is the exact error message Warning: session_start() [function.session-start]: SAFE MODE Restriction in effect. The script whose uid is 515 is not allowed to access /tmp owned by uid 0 in /home/mikalu/public_html/wp-content/plugins/wp-e-commerce/wpsc-core/wpsc-constants.php on line 17 Fatal error: session_start() [<a href='function.session-start'>function.session-start</a>]: Failed to initialize storage module: files (path: ) in /home/mikalu/public_html/wp-content/plugins/wp-e-commerce/wpsc-core/wpsc-constants.php on line 17 I've tried to turn off safe mode on my php configuration. nothing happens. the error's still there. I thought it was some kind of permission issue, so I tried to change /tmp permission to 777. Nothing happens. I googled it some more and suspect it might have something to do with fastCGI configuration and stuff. Which I totally don't understand. My googling result mostly suggest me to consult the web hosting provider or even to move to another host. But in this case, I am the owner of the server (VPS with cPanel/WHM). And I don't have any idea how to solve this kind of problem.

  Read the article

• ASUS EPC 1015CX won't boot with display after installing additional drivers

  - by Dinesh

  I have a ASUS EPC 1015CX with Ubuntu 12.04 LTS installed using wubi alongside Windows 7. It worked perfectly after installing except that the supported screen resolution was only 800*600 instead of 1024*600. The specifications of the 1015CX device can be found here I tried installing additional drivers which was Broadcom for wireless and Cedarview-drm. By this time there was no display coming up after the boot. I could hear a voice and then the letters I typed got pronounced correctly. So, I guessed the issue has to be with the graphic terminal. I tried repair broken packages in the menu and booted and the display is now at 1024*600. But, if I restart normally the problem continues like before. As per what I found out after searching, I again opened additional drivers and installed Cedarview-graphics-driver. I tried restarting hoping it will work. But again, the result was same. There was no display but the system was working. I did more searching and followed the instructions found here. But still the result was same. I am keen to switch to linux from windows after hearing and learning great things about it. I know this community is good and always helping. I wanted to thank you all for the help in advance. Please let me know what I am doing wrong and help me to switch to linux from this same old windows.

  Read the article

• 12.04.1 no audio through HDMI

  - by JoJo

  having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

  Read the article

• Can't boot into windows7/ubuntu 12.04 after running boot-repair

  - by Rini

  I have installed Ubuntu 12.04 on my preinstalled windows 7 Sony vaio E series laptop following instructions here: http://www.linuxbsdos.com/2012/05/17/how-to-dual-boot-ubuntu-12-04-and-windows-7/ Everything went well and I am able to boot in to windows after complete installation of Ubuntu. Now following instructions on web I tried to add Ubuntu to my BIOS using Easy BCD (but forget to add windows 7 entry). As a result, I loose windows 7 OS and can't boot in to either OS then I successfully repaired windows 7 using recovery CD. Now my problem is that I can't reinstall Ubuntu 12.04 using Live CD it halts every time before disk partition step giving error. "ubi-partman crashed". "ubi-partman failed with exit code 141. further information may be found in /var/log/syslog. Do you want to try running this step again before continuing? If you do not, your installation may fail entirely or may be broken." and, any choice to continue will result in the same error. After that following some post solutions I ran boot-repair commands in terminal ( in Try Ubuntu mode) and got the following URL: http://paste.ubuntu.com/1206434/ Now, after restart I can't boot into either Windows or Ubuntu. Even any attempt to run Windows repair is failed and I got the message : 'No operating System found' I don't know what went wrong after running boot-repair command. Please help in solving this issue. Thanks and Regards, R Shukla

  Read the article

• Nautilus crashes after Ubuntu Tweak Package Cleaner

  - by Ka7anax

  Few days ago I started having some problems with nautilus. Basically when I'm trying to get into a folder it crashes. It's not happening all the time, but in 85% it does... Sometimes, after the crash all my desktop icons are also gone. The only thing that I think causes this is Ubuntu Tweak - I'm not sure, but the issues started after I did the Package cleaner from Ubuntu Tweaks... Any ideas? -------- EDIT ---------- First time, after running the command (nautilus --quit; nautilus --no-desktop) 3 times all the system crashed (except the mouse, I could move the mouse). After restart I run it and obtain this: ----- Initializing nautilus-gdu extension Initializing nautilus-dropbox 0.6.7 (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertion value != NULL' failed (nautilus:2966): GConf-CRITICAL **: gconf_value_free: assertionvalue != NULL' failed Nautilus-Share-Message: Called "net usershare info" but it failed: 'net usershare' returned error 255: net usershare: cannot open usershare directory /var/lib/samba/usershares. Error No such file or directory Please ask your system administrator to enable user sharing. and then this: cristi@cris-laptop:~$ nautilus --quit; nautilus --no-desktop (nautilus:3810): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.

  Read the article

• Compiz Fusion And Unity Tool

  - by David Michael Rice

  I tried to install compiz fusion on ubuntu studio 13 and all I got was this Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: compiz-fusion-plugins-extra:i386 : Depends: compiz-core:i386 but it is not going to be installed Depends: compiz-fusion-plugins-main:i386 but it is not going to be installed Recommends: compizconfig-settings-manager:i386 but it is not going to be installed compiz-gnome : Depends: libcompizconfig0 but it is not going to be installed compizconfig-settings-manager : Depends: python-compizconfig (>= 1:0.9.9~daily13.04.18.1~13.04-0ubuntu1) but it is not going to be installed libcompizconfig-backend-gconf:i386 : Depends: libcompizconfig0:i386 but it is not going to be installed E: Unable to correct problems, you have held broken packages. david@Nebuchadnezzar:~$ Also I installed Unity tweak tool through the software center, and now I cannot find it at all, not even in search apps. I feel like every time I try to install something I have to jump through flaming hoops...

  Read the article

• Cinnamon Settings Panel Blank After v 2.0.6

  - by Cinnamon Challenge

  After cinnamon upgrade to 2.0.6-20131026040307-precise via synaptic, the "cinnamon settings" gui or window is broken. It appears blank, only showing the configuration category icons for "Appearance", "Preferences", "Hardware", and "Administration". The icons that should be within these categories are gone. I don't know if cinnamon-control-center was removed during the last cinnamon update, but this issue began on Oct. 25. When running cinnamon-settings from terminal, several errors appear such as this: Could not load screen module; is the cinnamon-control-center package installed? /usr/lib/cinnamon-settings/modules/cs_user.py:112: Warning: g_object_unref: assertion `G_IS_OBJECT (object)' failed file_icon = Gio.FileIcon().new(file) (cinnamon-settings.py:5471): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkMenuItem, but as a GtkBin subclass a GtkMenuItem can only contain one widget at a time; it already contains a widget of type GtkAccelLabel Could not find network module; is the cinnamon-control-center package installed? cinnamon-control-center is not installed in synaptic, and when the module is marked for installation, unity is selected for removal. Is there any way to get this function back without removing unity? Release: Ubuntu 12.04 (precise) Kernel: 3.2.0-55-generic Desktop: Cinnamon 2.0.6-20131026040307-precise Some settings are still accessible through terminal by appending the name of the function to the command: cinnamon-settings panel cinnamon-settings calendar cinnamon-settings themes cinnamon-settings applets cinnamon-settings windows cinnamon-settings fonts cinnamon-settings hotcorner

  Read the article

• CodePlex Daily Summary for Wednesday, May 28, 2014

  CodePlex Daily Summary for Wednesday, May 28, 2014Popular ReleasesToolbox for Dynamics CRM 2011/2013: XrmToolBox (v1.2014.5.28): XrmToolbox improvement XrmToolBox updates (v1.2014.5.28)Fix connecting to a connection with custom authentication without saved password Tools improvement New tool!Solution Components Mover (v1.2014.5.22) Transfer solution components from one solution to another one Import/Export NN relationships (v1.2014.3.7) Allows you to import and export many to many relationships Tools updatesAttribute Bulk Updater (v1.2014.5.28) Audit Center (v1.2014.5.28) View Layout Replicator (v1.2014.5.28) Scrip...Python extension for WinDbg: PYKD 0.3.0.6: Bug Fixed fixed : issue #13041 ( getCurrentThread raises exception) fixed : issue #13042 ( getProcessThreads raised Fatal Python Error ) fixed : issue #13043 ( getTargetProcesses raises Fatal Python Error)Yet another tool to read power production of SMA solar inverters: V2.4.5: Bugfix release See Modification History for more info.Continuous Affect Rating and Media Annotation: CARMA v2.01: Compiled as v2.01 for MCR 8.3 (R2014a) 32-bit version Program will automatically load settings from default.mat when opened When changing settings, users can choose to also edit default.mat Added extensive commenting in the source code file carma.m Added license.txt and readme.txt to the source code repositorySky Editor: Sky Editor 3.1 Beta 4: Since Last Beta -Cheats can be generated for specific games that have the same save format -Added preliminary code for supporting GBA codes. Things that need improvement: -Not everything can be translated with language support -Maybe a few minor graphical aspects -Spaces/language support for the code type ActionReplayDS Coming in a future release: -Changing Red/Blue Rescue Team's base type -Generating GBA cheats maybeMicrosoft Ajax Minifier: Microsoft Ajax Minifier 5.10: Fix for Issue #20875 - echo switch doesn't work for CSS CSS should honor the SASS source-file comments JS should allow multi-line comment directivesClosedXML - The easy way to OpenXML: ClosedXML 0.71.1: More performance improvements. It's faster and consumes less memory.Mathos Parser: 1.0.6.1 + source code: Removed the bug with comma/dot reported and fixed by Diego.Dynamics AX Build Scripts: DynamicsAXCommunity Powershell module (0.3.0): Change log(previous release was 0.2.4) 0.3.0 AxBuild (http://msdn.microsoft.com/en-us/library/dn528954.aspx) is supported and used by default. Smarter dealing with versions - e.g. listing configurations for all versions in the same time. $AxVersionPreference shouldn't be normally needed. Additional properties returned by Get-AXConfig. 0.2.5 -StartupCmd and -Wait added to Start-AXClient. Handles console output sent from AX (http://dev.goshoom.net/en/2012/05/console-output-ax/).xFunc: xFunc 2.15.6: Fidex #77QuickMon: Version 3.12: This release is mostly just to improve the UI for the Windows client. There are a few minor fixes as well. 1. Polling frequency presets fixed (slow, normal and fast) 2. Added collector call duration to history 3. History now displays time, state, duration and details in separate columns 4. Added a quick launch drop down list to main Window (only visible when mouse hover over it) 5. Removed the toolbar border. 6. Changed Windows service collector to report error only when all services from al...Kartris E-commerce: Kartris v2.6002: Minor release: Double check that Logins_GetList sproc is present, sometimes seems to get missed earlier if upgrading which can give error when viewing logins page Added CSV and TXT export option; this is not Google Products compatible, but can give a good base for creating a file for some other systems such as Amazon Fixed some minor combination and options issues to improve interface back and front Turn bitcoin and some other gateways off by default Minor CSS changes Fixed currenc...SimCityPak: SimCityPak 0.3.1.0: Main New Features: Fixed Importing of Instance Names (get rid of the Dutch translations) Added advanced editor for Decal Dictionaries Added possibility to import .PNG to generate new decals Added advanced editor for Path display entriesTiny Deduplicator: Tiny Deduplicator 1.0.1.0: Increased version number to 1.0.1.0 Moved all options to a separate 'Options' dialog window. Allows the user to specify a selection strategy which will help when dealing with large numbers of duplicate files. Available options are "None," "Keep First," and "Keep Last"SEToolbox: SEToolbox 01.031.009 Release 1: Added mirroring of ConveyorTubeCurved. Updated Ship cube rotation to rotate ship back to original location (cubes are reoriented but ship appears no different to outsider), and to rotate Grouped items. Repair now fixes the loss of Grouped controls due to changes in Space Engineers 01.030. Added export asteroids. Rejoin ships will merge grouping and conveyor systems (even though broken ships currently only maintain the Grouping on one part of the ship). Installation of this version wi...Player Framework by Microsoft: Player Framework for Windows and WP v2.0: Support for new Universal and Windows Phone 8.1 projects for both Xaml and JavaScript projects. See a detailed list of improvements, breaking changes and a general overview of version 2 ADDITIONAL DOWNLOADSSmooth Streaming Client SDK for Windows 8 Applications Smooth Streaming Client SDK for Windows 8.1 Applications Smooth Streaming Client SDK for Windows Phone 8.1 Applications Microsoft PlayReady Client SDK for Windows 8 Applications Microsoft PlayReady Client SDK for Windows 8.1 Applicat...TerraMap (Terraria World Map Viewer): TerraMap 1.0.6: Added support for the new Terraria v1.2.4 update. New items, walls, and tiles Added the ability to select multiple highlighted block types. Added a dynamic, interactive highlight opacity slider, making it easier to find highlighted tiles with dark colors (and fixed blurriness from 1.0.5 alpha). Added ability to find Enchanted Swords (in the stone) and Water Bolt books Fixed Issue 35206: Hightlight/Find doesn't work for Demon Altars Fixed finding Demon Hearts/Shadow Orbs Fixed inst...DotNet.Highcharts: DotNet.Highcharts 4.0 with Examples: DotNet.Highcharts 4.0 Tested and adapted to the latest version of Highcharts 4.0.1 Added new chart type: Heatmap Added new type PointPlacement which represents enumeration or number for the padding of the X axis. Changed target framework from .NET Framework 4 to .NET Framework 4.5. Closed issues: 974: Add 'overflow' property to PlotOptionsColumnDataLabels class 997: Split container from JS 1006: Series/Categories with numeric names don't render DotNet.Highcharts.Samples Updated s...PowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.3: Added CompressLogs option to the config file. Each Install / Uninstall creates a timestamped zip file with all MSI and PSAppDeployToolkit logs contained within Added variable expansion to all paths in the configuration file Added documentation for each of the Toolkit internal variables that can be used Changed Install-MSUpdates to continue if any errors are encountered when installing updates Implement /Force parameter on Update-GroupPolicy (ensure that any logoff message is ignored) ...WordMat: WordMat v. 1.07: A quick fix because scientific notation was broken in v. 1.06 read more at http://wordmat.blogspot.comNew Projects2111110074: Th?c hành l?p trình WindowEssence#: The essence of OOP: It's all messages, all the time.FUNIL DE VENDAS 2014: Testando novo repositórioFYRE: An FPS/MOBA game on the Cryengine 3: FYRE Is a FPS/MOBA game being developed on the CryEngine 3. We are currently looking for a team of people to help out with the development! Thank you GitThief: git thief is a test project to test interacting with CodeplexNLP.Framework.Common: Share the common nRF24L01+ Module for NETMF Gageteer 4.2: A NETMF module driver (DLL) that allows the use of a nRF24L01+ using the Gageteer version 4.2Pong: Create a Pong game with some variances.Projet AGL: Ce projet concerne le développement d'un programme mixmotSharePoint.WSPExtractor: This utility provides functionality to extract wsp-files from SharePoint (2010/2013) farm.SQL Server Change Data Capture Application: The SQLCDCApp is a GUI implementation for SQL Server Change Data Capture feature. Making it easy to CDC operations and to view and export change data.SvnThief: svn thief is a test project to test interacting with CodeplexYii Framework based Contact Center Application: Kontact é um sistema de gerenciamento de vendas, estoque e pessoal, com foco em Contact Center, programado em PHP, usando os padrões jQuery, Bootstrap e Yii Fra

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >