Search Results

Search found 3038 results on 122 pages for 'places'.

Page 82/122 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Setting up a dualboot by installing cloned partitions using clonezilla

  - by Nimjox

  I'm trying to setup a dual boot system where I have Windows 7 and Linux Mint. Here's the kicker both are partitions I've saved using Clonzezilla from different places and to make matters worse Linux Mint is formated as a LVM. I need both of these images specifically as windows is a corporate image that I must use and the other is a development image that took me a week to setup. I've gotten it almost all working but my issue is that I can't get clonezilla to not mess up the partition table of Windows when installing Mint or vise-vera. I can use the (-k1 option) which doens't copy the partition table but then I have a unusable partition when it clones and I'm not sure how to fix the partition table. Here's what I'm doing: Using Gparted to make partitions sda1 40GB ntfs (windows), sda2 extended 70GB, sda5 lvm2 pv 69.99 GB (Linux), sda3 500MB (GRUB) Clonezilla windows image into sda1 partition (keeping partition table) Clonezilla linux image into sda5 partition (not recreating partition table) After all that I can boot into windows using the default MBR. I can use rescue-repair cd to reinstall GRUB which will see Windows 7 but I can't get it to see the Linux OS. I'm thinking its because of the sda5 partition but I'm not sure any ideas on what I could do to get this working or where I might be going wrong. If there is any additional detail you need please let me know and I'll edit as this is a lot.

  Read the article

• Best practices for settings for Oracle database creation

  - by Gary

  When installing an Oracle Database, what non-default settings would you normally apply (or consider applying) ? I'm not after hardware dependent setting (eg memory allocation) or file locations, but more general items. Similarly anything that is a particular requirement for a specific application rather than generally applicable isn't really useful. Do you separate out code/API schemas (PL/SQL owners) from data schemes (table owners) ? Do you use default or non-default roles, and if the latter, do you password protect the role ? I'm also interested in whether there's any places where you do a REVOKE of a GRANT that is installed by default. That may be version dependent as 11g seems more locked down for its default install. These are ones I used in a recent setup. I'd like to know whether I missed anything or where you disagree (and why). Database Parameters Auditing (AUDIT_TRAIL to DB and AUDIT_SYS_OPERATIONS to YES) DB_BLOCK_CHECKSUM and DB_BLOCK_CHECKING (both to FULL) GLOBAL_NAMES to true OPEN_LINKS to 0 (did not expect them to be used in this environment) Character set - AL32UTF8 Profiles I created an amended password verify function that used the apex dictionary table (FLOWS_030000.wwv_flow_dictionary$) as an extra check to prevent simple passwords. Developer logins CREATE PROFILE profile_dev LIMIT FAILED_LOGIN_ATTEMPTS 8 PASSWORD_LIFE_TIME 32 PASSWORD_REUSE_TIME 366 PASSWORD_REUSE_MAX 12 PASSWORD_LOCK_TIME 6 PASSWORD_GRACE_TIME 8 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME 1080 IDLE_TIME 180 LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Application login CREATE PROFILE profile_app LIMIT FAILED_LOGIN_ATTEMPTS 3 PASSWORD_LIFE_TIME 999 PASSWORD_REUSE_TIME 999 PASSWORD_REUSE_MAX 1 PASSWORD_LOCK_TIME 999 PASSWORD_GRACE_TIME 999 PASSWORD_VERIFY_FUNCTION verify_function_11g SESSIONS_PER_USER unlimited CPU_PER_SESSION unlimited CPU_PER_CALL unlimited PRIVATE_SGA unlimited CONNECT_TIME unlimited IDLE_TIME unlimited LOGICAL_READS_PER_SESSION unlimited LOGICAL_READS_PER_CALL unlimited; Privileges for a standard schema owner account CREATE CLUSTER CREATE TYPE CREATE TABLE CREATE VIEW CREATE PROCEDURE CREATE JOB CREATE MATERIALIZED VIEW CREATE SEQUENCE CREATE SYNONYM CREATE TRIGGER

  Read the article

• How to find out which program a default beep is coming from in Windows 7?

  - by leeand00

  There's a "default beep" (as defined in System Sounds) that emanates from my computer every so often. It kind of goes like this (where each number is a "default beep" sound): 1, 2, 3, 4, 5. So there's a distinct pattern to it. I thought I had this figured out a way to figure out what was happening by going to Control Panel-Ease of Access-Ease of Access Center-Replace sounds with visual cues But that just isn't the case. Whichever window I click on, that one displays the visual queue when this happens. It's driving me crazy, and I can't figure out which program is causing this. Update: it appears to only happen on one user profile on the computer...does that help? Update 2: Discovered that this sound was coming from a utility on my laptop called ASUS NB Probe; I'm certain that it is emanating from this program because the error message displayed by it changes in sync with the sound playing. Apparently the S.M.A.R.T. feature of my hard drive was reporting an issue. It displays the issue for a brief second and then makes it disappear, I'll have to keep watching it to see what it says, but I believe is says something about a read. I have an external hdd connected with eSATA to a container of sorts (BlacX) that you can plug two hdds into. I have one hdd attached and it's a Western Digital WD1001FALS - 00E8B0 Thanks again! Now I'm off to go around the Internet and report on this...since I posted it so many places!

  Read the article

• How to set up multiple DNS servers on an intranet

  - by Brent

  We have an Active Directory network, with a mixture of Windows DNS, linux BIND servers, and want to use OpenDNS as our external DNS provider. I am wondering What is the best way to set up these servers (regarding forwarders, recursion, etc.)? Active Directory is our main internal DNS for our domain, and has 3 redundant servers. DHCP and all our servers use these as their DNS servers. Then we have a legacy AD server from an old network that is still authoritative for a bunch of domains. Finally, we have a couple of Linux Bind servers that are authoritative for a bunch of websites we host. Should our main AD servers point to our legacy AD server, which points to one of our BIND servers, which points to the other BIND server, which finally points out to openDNS? Or should our main AD servers point to all of these directly? - or is there a better option? What happens if a domain is listed in 2 places? Does DNS process the forwarders in order? What about root servers - if I want to use OpenDNS for "everything else", do I just list them as the last forwarders, and delete the root servers from all my DNS servers? How does recursion work - in this scenario, should I be using recursion or not?

  Read the article

• Maxtor 500GB external hard drive not being detected but power is going to it?

  - by ClarkeyBoy

  I have 2 * Maxtor Onetouch 4 Lite 500GB external hard drives (part no. 9NT2A4-500). They both used to work fine on my old laptop (an Acer) but I have not used them for about a year, since my laptop was stolen and I got this one (also an Acer [Aspire 7738G]). I have one plugged into the mains with one of the leads I believe was supplied with them. It appears to be receiving power as it is warm and the power light (on the unit itself) is on; also the mains adapter is fairly warm. I also have it plugged into my laptop with a USB lead which I have tested on my mp3 player (so I know it works). However my hard drive is not showing on my computer. I have tried checking for new hardware, installing the software that was supplied with it, checking drive letters in case it is registered as C: or something stupid, checking for problems etc... I can't find any cause for it to do this. It does appear to be starting up and, possibly, shutting down and restarting constantly (that's what it sounds like altho I can't be certain). I have had both hard drives stored in different places for the last year and they're both doing the same thing.. if it was only one then I'd guess it had got damaged or corrupted or something but since it is both I doubt this is it. The only things in common with both of them are the leads and the laptop, however I know the USB lead works and guess the mains lead works as there is power going to the unit. Has anyone come across this before or does anyone have any idea what the cause / solution to the problem is? Any help would be greatly appreciated. Regards, Richard

  Read the article

• Explorer.EXE ordinal 423 not found in urlmon.dll after updates/IE8 install

  - by Zoot

  Setting up a brand new Dell Optiplex 980 with Windows XP SP3, and everything started up fine on the first boot. My first task was to install system updates, including IE8 and WGA. After the required reboot after installing updates, I now get this error message: Explorer.EXE Ordinal not found. The ordinal 423 could not be located in the dynamic link library urlmon.dll Per my cursory Google search, this forum thread places the blame squarely on IE8. The solution provided is to enter safe mode and remove IE8. Unfortunately, when I press F8 to choose to boot safe mode, I only have the option of "Windows XP SP3 Professional" and no safe mode options. Any other ideas? Thanks in advance. FYI, I can get to the Windows Task Manager by holding down Control-Alt-Delete, but programs don't seem to run properly if you select them. I tried chatting with Dell Support, and we tried to initiate the system restore at c:\windows\system32\restore\rstrui.exe, but that had a similar "ordinal 423 not found in urlmon.dll" error.

  Read the article

• Google chrome not accepting any security certificates

  - by Jerry

  I've recently developed a problem with Google Chrome that's really annoying. I'm using Firefox at the moment with no problems whatsoever and it's the same with IE, so it's safe to say this problem is specific to Chrome. The problem is that it's not accepting security certificates from certain sites. I suppose the best place to start would be google itself. I can't search. The google search page will load but when I type some search term into the search box and hit 'search' I get the message: "You attempted to reach www.google.com, but the server presented an invalid certificate. You cannot proceed because the website operator has requested heightened security for this domain." No matter what the search term is, this is the result. Also when I try to log in to facebook - same message. Youtube works and many other sites that I know present security certs so I'm baffled. I've searched and there are other people who have had similar issues but I can't find a solution anywhere. The most common answer I'm picking up for this is to "check your system time" but I can safely say that it's not my system time. If anyone knows what is going on, I'd very much appreciate being informed. It's not super urgent as I can use Firefox to access those places Chrome won't, but it IS super annoying because I can usually sort out issues like this in no time.

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• How long will a USB key with an OS installed on it last?

  - by Xananax

  I've heard numerous times that installing an OS on a USB key is a bad thing to do, as USBs typically have a certain number of writes before dying, and installing an OS on it will wear it out (unless it's used sporadically for rescue purposes). Nonetheless, I am very tempted to install some flavour of Linux (Ubuntu or Arch, I haven't decided yet) on a small, transportable, USB Key. My problem is, although you read a lot that it's "bad", you are never told how bad. How long would it last (provided, say, a pc that is 24/7 on)? A month? A year? Five years? Is there recipes to make it last longer? Is there any reason beside weariness that should prevent me from attempting this? I mean, if it can be calculated, then I could theoretically shield myself by doing regular backups on another key when the deadline gets close (for example). Notes I am not talking of using a USB as a live CD, but actually installing the OS on it.) When I say "USB Key", I refer to the little USBs with a flash memory, not an external USB hard drive. For the curious, my reason is that I work in a lot of different places, on different PCs, and I have a very customized session, with my own WM, my own key bindings, my own scripts, , a selection of plugins for firefox and chrome, etc, and currently I am synchronizing all this through a mix of dropbox, git, and transporting files on USBs, and and it's becoming a chore. It would be much simpler for me to just plug the USB and mount the hard disk of the PC I am using and use it's processing power without actually needing to install any OS on it.

  Read the article

• MSE updating fails, no warning or error message.

  - by WebDevHobo

  I'm running Windows 7 Ultimate, 32-bit. For the last couple of days, MSE doesn't fails to update, remaining stuck at version 1.75.119 I presume that an error log is created somewhere, or an event log, but I don't know where to find those. It just says "connection failed". Tried it at home, at work and friends places, but never works. Restarted computer a lot of times now, checked for Microsoft Updates in general, but nothing shows up. EDIT: I've opened a bounty for this, because I really don't know what to do anymore. The oldest answer(the long post) here did not work. Besides this problem, I'm having trouble using MSI installers too. I've had to add the SYSTEM group to a lot of maps and give them full control, but shouldn't the SYSTEM already be there? Also, I had to remove the "read-only" attribute from the ProgramData and Users folders, add the SYSTEM group there too and give them full control. Only then will the MSI install work and even then, it says I doesn't have the rights to create a shortcut on the desktop. Don't know what I need to modify and where for that. I'm saying this because I don't know how MSE updates, but if they use MSI files to do that, that might explain things. The SYSTEM group remains added, but every time I take away the read only attribute, click OK and check the settings again, read-only is still active... That's all I know. Screenshot, all those updates were manual:

  Read the article

• Configuration Help for Sendmail Required

  - by Vinayak Mahadevan

  Hi I need some help with respect to sendmail configuration. The basic problem is that I have some employees working from other places and they need access to their mail. So what I have done right now is whatever mails which are meant for them which are generated from within the company and collected by my internal mail server is bounced to an external mail server from where the employees access it. This is done through a email id on a different domain. This was working fine till I restricted the external mailing access for certain users using rulesets in sendmail.cf. Once I had put that in place only people who had external mailing rights could send mails to people outside the office. What I would like to know is that is there anyway where I can expose sendmail on two different ips and thereby configure everybody's email id to point to the same internal mail server using 2 different ips. one ip when inside the company and one ip outside the company. Is it possible that I have one static ip configured for both internal access and external access or is there any otherway it can be done with sendmail. Can anybody help me Sorry for the long post Regards Vinayak

  Read the article

• permanent NAS-mount in Ubuntu - wrong fs type, bad option, bad superblock

  - by Emil

  My network drive shows up in the file browser, just like my external usb-harddrive. Moving, running and editing files works. Hovering over it shows smb://lacie-2big/nasdisk . BUT, when I want to save a file, the drive doesn't come up as an option. All I can see is my other places, including my usb-harddrive. I am a complete newbie but I am GUESSING that it has something to do with the mount not being a "real" mount but just a shortcut to the smb location. So I ran the tutorial at https://wiki.ubuntu.com/MountWindowsSharesPermanently about how to "mount a network drive permanently". edited my fstab to //LaCie-2big/nasdisk /media/nasmount cifs guest,uid=1000,iocharset=utf8,codepage=unicode,unicode 0 0 and running sudo mount -a gave me the following error: mount: wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program, or other error (for several filesystems (e.g. nfs, cifs) you might need a /sbin/mount. helper program) In some cases useful info is found in syslog - try dmesg | tail or so Now thats a very helpful error message, BUT, before I go any further, I'd be really thankful if one of you could tell me if I'm even in the right ballpark, or if my actual need: to be able to download files (ie torrents) directly to the drive, can be possible as it is already. Question: How to fix "wrong fs type, bad option, bad superblock on //LaCie-2big/nasdisk, missing codepage or helper program" when running mount -a

  Read the article

• Is there any free software to check for issues with a DVD drive?

  - by AgentConundrum

  I don't usually play movies on my laptop (prefer the standalone with the tv), but I tried to watch one the other night, and noticed playback was really choppy and had audio artifacts in places. I thought it could be related to memory issues so I rebooted and tried again, but the results were the same. I considered that it could be an issue with the disc, so I tried to clean it but again there was no change. I don't think the problem is with the disc, because I tried another disc and it also had the same problem. I don't think I've ever watched the second disc since I've had it, so it should have been safe in its jewel case. Also, there were no issues when I watched an episode off the first disc in my standalone player. What I'm wondering is: are there are any (free) utilities that can check for issues with the drive itself? I looked around but most of the software I found focuses on integrity checks for the disc, not the drive. I have had issues with this laptop recently (had to replace the keyboard when the cat damaged it while I was cleaning dust out and the machine was ripped apart, also replaced part of the chassis after I cracked it when I tried to open it not knowing a screw was still in it) so I may have just replaced the drive incorrectly. I'm going to check on this while I await an answer to this question. Thanks.

  Read the article

• How to recover a Linksys WRT54GL router that has a blinking green power LED and no response from the

  - by Peter Mounce

  I was flashing the router with the Tomato firmware, but something went wrong; I'm not sure what. Now, the router responds to ping at 192.168.1.1 (my Mac's on a static IP 192.168.1.21), but the web-interface doesn't come up. I have read that this situation is recoverable in a [couple of places][2], but I haven't been having much success and so I wondered whether anyone could help. From my Mac (OSX 10.5) I have tried to tftp a new vanilla-Linksys firmware to the router and reboot; according to the trace, this sends it but the router behaves no differently after a reboot. I've read that if boot_wait is turned on, I'll have an easier time, but I haven't been able to find any instructions that tell me how I can tell whether I did this or not (I don't think I have, but I might have, when I tinkered the first time months ago - the router has worked since then, though). I have found a couple of references to [something called JTAG][3], which seems like some kind of [homebrew diagnostic cable thing][4], but that's a little beyond my ken. Happy to try it, with muppet-level instructions, though (I do software, not hardware!). So, I'm at a bit of a loss, really, and wondered whether anyone could provide me with the route (ha. ha.) out of this mess? Hm, I can't post all the links I wanted to until I have some more reputation.

  Read the article

• Best photo management software?

  - by Niels Basjes

  Hi, What I would like is a single piece of software (or a smart combination of tools) that allow me to manage my photos in a better way than what I've found so far. 1. Tags Primarily I need a way of tagging the images. So I can manually tag photos the same way we tag questions here at SO/SF/SU. I want this software to place a lot of the tags automagically (obvious things like date and resolution). 2. Face recognition What I would really like is that this software has a feature that it can recognize faces in images and places tags with the name of the person. So far I've only heard of one online photo system that can do that (Picasa) and not yet of any offline tool. 3. Version database I must have some way of having a central GIT/SVN/... that contains all images. I have had a harddrive corruption a few years ago and it took me a long time to figure out which images had been damaged. I always want to be able to go back to what the camera produced. 4. Website I want to be able to generate a website (few 'tag' specific websites) based on the actual content. 5. Easy bulk uploading Many photo tools have a one on one uploading option. I prefer simply 'throwing' my images on a file server under Linux (Samba) and let the system automagically integrate, tag, recognize, etc. all images. Ok, I know these are a bit much. Perhaps you guy's have some suggestions about existing tools that can make this possible. Or even a complete system that does this. EDIT: To clarify on the OS. I prefer Linux for any 'server' task and Windows XP for any 'desktop' task. Thanks for all your input. Niels Basjes

  Read the article

• Change font size for "Default Paragraph Font" in Word

  - by Richard Gadsden

  I have a document where the built-in style "Default Paragraph Font" has been set to a particular size. It shouldn't have a size - it should be inheriting from the paragraph style (that's the whole point of the style). If I go through the user interface, I can't modify this style (the modify button / dropdown is greyed out) While I can work around this in most places, it creates problems for the Table of Contents in particular, as that is forced to be in this style and it overrides the font size from the styles like TOC 1 (etc). I can set the font size through VBA - ActiveDocument.Styles("Default Paragraph Font").Font.size = 10 sets it to ten point, but I can't work out how to reset it back to inherit. At the moment, my table of contents is set to be all in the same size, but really TOC 1 should be bigger than TOC 2. Does anyone have any suggestions for how to fix this? One approach is to use the organizer to copy over the style from a working document, but ideally I'd like a way to resolve the problem without doing that - especially as that's not an easy approach to automate.

  Read the article

• mod_cache not working

  - by Pistos

  I have a PHP site that has many dynamically generated pages. I'm trying to turn to mod_cache to help boost performance, because in most cases, content does not change in a given day. I have configured mod_cache as best I could, following examples around the web, including the mod_cache page on apache.org. When I set LogLevel debug, I see a bit of information about the caching that is [not] happening. There are plenty of pairs of lines like this: [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(141): Adding CACHE_SAVE filter for /foo/bar [Fri Jun 01 17:28:18 2012] [debug] mod_cache.c(148): Adding CACHE_REMOVE_URL filter for /foo/bar Which is fine, because I've set CacheEnable disk /foo, to indicate that I want everything under /foo cached. I'm new to mod_cache, but my understanding about these lines is that it just means that mod_cache has acknowledged that the URL is supposed to be cached, but there are supposed to be more lines indicating that it is saving the data to cache, and then later retrieving them on subsequent hits to the same URL. I can hit the same URL till I'm blue in the face, whether with F5 refreshing, or not, or with different browsers, or different computers. It's always that pair of lines that shows in the logs, and nothing else. When I set CacheEnable disk /, then I see more activity. But I don't want to cache the entire site, and there are many, many different subpaths to the site, so I don't want to have to modify code to set no-cache headers in all the necessary places. I'll mention that mod_rewrite is in use here, rewriting /foo/bar to something like index.php?baz=/foo/bar, but my understanding is that mod_cache uses the pre-rewrite URL, not the post-rewrite URL. As far as I can tell, I have the response headers not getting in the way of caching. Here's an example from one hit: Cache-Control:must-revalidate, max-age=3600 Connection:Keep-Alive Content-Encoding:gzip Content-Length:16790 Content-Type:text/html Date:Fri, 01 Jun 2012 21:43:09 GMT Expires:Fri, 1 Jun 2012 18:43:09 -0400 Keep-Alive:timeout=15, max=100 Pragma: Server:Apache Vary:Accept-Encoding mod_cache config is as follows: CacheRoot /var/cache/apache2/ CacheDirLevels 3 CacheDirLength 2 CacheEnable disk /foo What is getting in the way of mod_cache doing its job of caching?

  Read the article

• What does it mean for the file name to be shown with red background

  - by user56614

  I'm trying to install Cisco VPN client on Linux Ubuntu 10.04. The installer creates the directory, places all the necessary files in it, and then fails to launch the binary. I tried to launch it myself, the system rebukes me too. Closer inspection yields the following: eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo chmod u+x vpnagentd eugene@eugene-desktop:/opt/cisco/vpn/bin$ ls -la total 5124 drwxr-xr-x 2 root root 4096 2010-10-23 11:51 . drwxr-xr-x 6 root root 4096 2010-10-23 11:51 .. -rwxr-xr-x 1 root root 1607236 2010-10-23 11:51 vpn -rwsr-xr-x 1 root root 1204692 2010-10-23 11:51 vpnagentd -r--r--r-- 1 root root 697380 2010-10-23 11:51 vpndownloader.sh -rwxr-xr-x 1 root root 1712708 2010-10-23 11:51 vpnui -rwxr-xr-x 1 root root 3654 2010-10-23 11:51 vpn_uninstall.sh eugene@eugene-desktop:/opt/cisco/vpn/bin$ ./vpnagentd bash: ./vpnagentd: No such file or directory eugene@eugene-desktop:/opt/cisco/vpn/bin$ sudo ./vpnagentd sudo: unable to execute ./vpnagentd: No such file or directory The file name "vpnagentd" is shown in white letters with red background. The other three executables are in green letters with black background, as expected. Any ideas?

  Read the article

• Microsoft Windows DHCP: Steering IPv4 clients into specific scopes based on MAC

  - by Easter Sunshine

  We have visitors on our campus who bring their own laptops and devices and use our wireless and wired networks. When we receive a copyright infringement notice (typically BitTorrenting), we are required to quarantine that MAC address so that it no longer has Internet access. No matter what website it tries to visit, it is sent to a web page explaining to the user that the device has been quarantined. We have thus far implemented this in ISC DHCP on Linux. We have multiple VLANs with one or more public-IP subnets and one RFC1918 quarantine subnet each. All clients are leased IPs in the public-IP subnet(s) unless you're in a list of known bad MACs. Then, you are sent to the quarantine subnet so that your traffic is unroutable on the Internet (you are isolated by subnet only, not by VLAN). We would like to move to Windows DHCP in light of the IPAM role but I cannot figure out how to replicate this in Windows DHCP 2012 (Assign DHCP IPs for specific MAC prefixes on Windows Server 2008 R2 suggests it was not possible in 2008 R2), even while using policies. So here's what I'd like: The administrator/help desk provides and maintains a list of MAC addresses that are to be quarantined. The DHCP server places those MACs into the quarantine subnet on the respective VLAN, no matter which VLAN the client is in. I don't think reservations would work: We currently have about 300 registered bad MACs and about 12 VLANs. I don't want to make 300 x 12 reservations nor have to add 12 reservations per new MAC address. Not to mention all of the quarantine subnets are /24s. We do not have NPS/NAC. You do not have to register your MAC address get network access. We use Cisco routers/switches. Thanks.

  Read the article

• Ubuntu questions - important

  - by asdasd

  They had installed some modified edubuntu's at school... So i have some questions about setting some things up: How we can play HD videos ? They are made for windows machines and are in .wmv format but we need to play them on our multimedia class but don't know how - which player, which codecs etc. How to edit properly the /etc/apt/sources file ? Anything we try to install via apt-get it just says that E:\ is not available. Please tell me which repositories to put in there so we could be able to install some tools. Where are usually viruses/trojans put in ubuntu ? I mean in which directories ? Because our computers are behaving really slow and we need to check for some malware manually - we are not even allowed to install any kind of AV software. So tell me the usual directories and places for hiding such files, how are they hiddem, how to recognize them etc. Any others nice tricks/tips that we need to know. Thank you very much in advance.

  Read the article

• My New Dell Workstation T-7500 gives electric shock

  - by Dan

  Just bought Dell T-7500 Workstation. When installation technician came to Install the workstation, he got an electric shock when he touched the Start Button. He also got shock when he touched Front Panel. No shock when touching rest of the Chassis. He called Dell Support & tried to troubleshoot by taking out various wires etc but did not help. I touched the same places & I also got shock. We checked everything possible including connecting to various outlets but it didn't solve the problem. Installation subcontractor said that they are not supposed to troubleshoot anything on new system, just install it & they made notes & left. I called my sales guy & it was weekend so he said he will take care of it on Monday. Here are my concerns : (1) Why does that happen ? Although it is a mild shock & it won't kill you but might damage other parts of workstation ? (2) Is this common for workstations ? (3) What should I do ? Of course Dell will try to troubleshoot again but should I let them do that OR ask for a New System ? (4) Wheat would happen if I continue using it till the new system arrives ? Thank You.

  Read the article

• What applications do people use for windows folder management? How do you switch between folders in

  - by 118184489189799176898

  I'm always switching between client's folders in different applications like photoshop, sql manager, explorer etc. It's so slow to go between them, navigate to the folder and it's still too slow to copy and paste the directory etc. It's so annoying to do. Someone must have a good solution. I was thinking if there was a "recently accessed" folders list available within every folder explorer window... so in any application, if i go "file open" it will have something, somewhere that lists the recently accessed folders - that would be really helpful. I am aware of the recent places folder in win7, but this sucks because it is not sorted by date accessed. Perhaps if there was a way to change this then this would become a decent feature? Is there some application that already does this? i'm sure someone has already solved this issue in a more elegant solution than I can think off. I'm keen to know what programs people use or how people addresss this issue? Thanks...

  Read the article

• Get the desktop/viewport of a window in enlightenment?

  - by Zorf

  Okay, so, given a XID of a window I need to get its desktop or viewport as well as the currently active one. Enlightenment does not seem to properly respond to wmctrl which leads to: ***@note:~ > wmctrl -lG 0x01e00002 -1 21 395 310 146 note Conky (note) # it places conkey wndows on -1 for some reason? 0x01c00002 -1 65 655 230 158 note Conky (note) 0x01a00002 -1 25 215 230 182 note Conky (note) 0x01800002 -1 25 550 310 110 note Conky (note) 0x01600002 -1 685 145 230 120 note Conky (note) 0x01400002 -1 1120 245 280 206 note Conky (note) 0x01200002 -1 1095 35 230 186 note Conky (note) 0x01000002 -1 1145 470 250 266 note Conky (note) 0x00c00002 -1 40 34 230 182 note Conky (note) 0x00e00029 0 0 0 1440 900 note ~ : bash – Konsole # desktop 2, fullscreen 0x03a00060 0 505 231 899 642 note Downloads – 'Dolphin' # destkop 0 0x0480001a 0 206 222 958 526 note Lifelover - Kärlek - becksvart melankoli #desk 2 0x034000e6 0 116 32 984 767 note clemctrl – Kate #desk 0 0x02c01b78 0 309 314 549 520 note ************* # desk 1 0x04e00062 0 104 31 990 619 note XChat: *** @ Free / #*** (+Ccnt) #desk 1 0x05c00112 0 22 35 1396 834 note StarCraft on Reddit - Chromium #desk 3 0x02c0f292 0 453 356 549 520 note *** #desk 1 0x02c000c0 0 860 216 557 645 note Buddy List # desk 1 As can be seen, all windows are on desk 0 in wmctrl except conky windows. Furthermore the geometry-viewport trick also doesn't seem to work that works in some wm's, are there any other tricks to get on which viewport/desktop a window is? There has to be some way to get it right?

  Read the article

• Guest can't access host windows network share

  - by Asteroza

  HI folks, I've recently run into a strange problem after upgrading to VMware player 3. Certain virtual machines (currently an XP and a VIsta VM) seem to have lost the ability to access the host (XP) network shared folders (SMB). Both VM machines are bridged networking, firewall is up. Host firewall is up. Host and guests use DHCP. All OS are workgroup connected. The Vista VM I am not completely sure, but the XP VM did have access to the host's network shared folders after the player upgrade. Then today it wouldn't work, network path can't be found. Now here's the wierd part. The host's network shared folders can be accessed properly by other PC's on the network (and as far as I know, no settings have been changed). The host is pingable from the guests, and name resolution works. The guests can access network shares on other PC's in the network, and access the internet. My Network Places shows the host PC, but double clicking on it takes a long time before it finally times out with an error. Doing a wireshark packet capture, the guest is sending out the protocol negotiation, and the host is sending a response, but after that the guest behaves like it didn't receive anything and is doing TCP retransmissions. Anybody have any idea what could be wrong? Yes I know I can drag and drop files or setup the special VMware shared folders, but I want to access the host just like any other network accessible shared folder. It just seems really odd when any other computer works, just not between the guest and host.

  Read the article

• Scriptable BitTorrent clients?

  - by James McMahon

  In an effort further automate all the little computer house keeping tasks that can waste my time I am looking into BitTorrent clients that have the ability to script common tasks. I've done some Googling and it looks like Transmission might have some of said such capabilities, but there site wasn't very clear on the details. Things I am looking to do; Prioritize and label torrents based on trackers Set seed length based on trackers and filesize Set additional seed time when a torrent's seed time expires based on a number of factors, like time spent seeding, remaining disk space and ratio. Move torrents to appropriate places post seeding based on labels and tracker Basically, while I could Python or Bash script things like moving torrents around and other simple actions, I need away to talk to the client to figure out things like the torrent seed time, tracker, labels, filesize, etc. Is there any client out there that would allow me to all or a subset these actions? I have access to Linux, Mac and Windows and am not tied to any particular torrent client. I am a programmer so I have no problems writing scripts, but examples of torrent scripting would also be helpful.

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >