Search Results

Search found 10406 results on 417 pages for 'device'.

Page 83/417 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• C++ Serial Port Question

  - by Pfeffer

  Problem: I have a hand held device that scans those graphic color barcodes on all packaging. There is a track device that I can use that will slide the device automatically. This track device functions by taking ascii code through a serial port. I need to get this thing to work in FileMaker on a Mac. So no terminal programs, etc... What I've got so far: I bought a Keyspan USB/Serial adapter. Using a program called ZTerm I was successful in sending commands to the device. Example: "C,7^M^J" I was also able to do the same thing in Terminal using this command: screen /dev/tty.KeySerial1 57600 and then type in the same command above(but when I typed in I just hit Control-M and Control-J for the carriage return and line feed) Now I'm writing a plug-in for FileMaker(in C++ of course). I want to get what I did above happen in C++ so when I install that plug-in in FileMaker I can just call one of those functions and have the whole process take place right there. I'm able to connect to the device, but I can't talk to it. It is not responding to anything. I've tried connecting to the device(successfully) using these: FILE *comport; if ((comport = fopen("/dev/tty.KeySerial1", "w")) == NULL){...} and int fd; fd = open("/dev/tty.KeySerial1", O_RDWR | O_NOCTTY | O_NDELAY); This is what I've tried so far in way of talking to the device: fputs ("C,7^M^J",comport); or fprintf(comport,"C,7^M^J"); or char buffer[] = { 'C' , ',' , '7' , '^' , 'M' , '^' , 'J' }; fwrite (buffer , 1 , sizeof(buffer) , comport ); or fwrite('C,7^M^J', 1, 1, comport); Questions: When I connected to the device from Terminal and using ZTerm, I was able to set my baud rate of 57600. I think that may be why it isn't responding here. But I don't know how to do it here.... Does any one know how to do that? I tried this, but it didn't work: comport->BaudRate = 57600; There are a lot of class solutions out there but they all call these include files like termios.h and stdio.h. I don't have these and, for whatever reason, I can't find them to download. I've downloaded a few examples but there are like 20 files in them and they're all calling other files I can't find(like the ones listed above). Do I need to find these and if so where? I just don't know enough about C++ Is there a website where I can download libraries?? Another solution might be to put those terminal commands in C++. Is there a way to do that? So this has been driving me crazy. I'm not a C++ guy, I only know basic programming concepts. Is anyone out there a C++ expert? I ideally I'd like this to just work using functions I already have, like those fwrite, fputs stuff. Thanks!

  Read the article

• What's up with LDoms: Part 4 - Virtual Networking Explained

  - by Stefan Hinker

  I'm back from my summer break (and some pressing business that kept me away from this), ready to continue with Oracle VM Server for SPARC ;-) In this article, we'll have a closer look at virtual networking.  Basic connectivity as we've seen it in the first, simple example, is easy enough.  But there are numerous options for the virtual switches and virtual network ports, which we will discuss in more detail now.   In this section, we will concentrate on virtual networking - the capabilities of virtual switches and virtual network ports - only.  Other options involving hardware assignment or redundancy will be covered in separate sections later on. There are two basic components involved in virtual networking for LDoms: Virtual switches and virtual network devices.  The virtual switch should be seen just like a real ethernet switch.  It "runs" in the service domain and moves ethernet packets back and forth.  A virtual network device is plumbed in the guest domain.  It corresponds to a physical network device in the real world.  There, you'd be plugging a cable into the network port, and plug the other end of that cable into a switch.  In the virtual world, you do the same:  You create a virtual network device for your guest and connect it to a virtual switch in a service domain.  The result works just like in the physical world, the network device sends and receives ethernet packets, and the switch does all those things ethernet switches tend to do. If you look at the reference manual of Oracle VM Server for SPARC, there are numerous options for virtual switches and network devices.  Don't be confused, it's rather straight forward, really.  Let's start with the simple case, and work our way to some more sophisticated options later on.  In many cases, you'll want to have several guests that communicate with the outside world on the same ethernet segment.  In the real world, you'd connect each of these systems to the same ethernet switch.  So, let's do the same thing in the virtual world: root@sun # ldm add-vsw net-dev=nxge2 admin-vsw primary root@sun # ldm add-vnet admin-net admin-vsw mars root@sun # ldm add-vnet admin-net admin-vsw venus We've just created a virtual switch called "admin-vsw" and connected it to the physical device nxge2.  In the physical world, we'd have powered up our ethernet switch and installed a cable between it and our big enterprise datacenter switch.  We then created a virtual network interface for each one of the two guest systems "mars" and "venus" and connected both to that virtual switch.  They can now communicate with each other and with any system reachable via nxge2.  If primary were running Solaris 10, communication with the guests would not be possible.  This is different with Solaris 11, please see the Admin Guide for details.  Note that I've given both the vswitch and the vnet devices some sensible names, something I always recommend. Unless told otherwise, the LDoms Manager software will automatically assign MAC addresses to all network elements that need one.  It will also make sure that these MAC addresses are unique and reuse MAC addresses to play nice with all those friendly DHCP servers out there.  However, if we want to do this manually, we can also do that.  (One reason might be firewall rules that work on MAC addresses.)  So let's give mars a manually assigned MAC address: root@sun # ldm set-vnet mac-addr=0:14:4f:f9:c4:13 admin-net mars Within the guest, these virtual network devices have their own device driver.  In Solaris 10, they'd appear as "vnet0".  Solaris 11 would apply it's usual vanity naming scheme.  We can configure these interfaces just like any normal interface, give it an IP-address and configure sophisticated routing rules, just like on bare metal.  In many cases, using Jumbo Frames helps increase throughput performance.  By default, these interfaces will run with the standard ethernet MTU of 1500 bytes.  To change this,  it is usually sufficient to set the desired MTU for the virtual switch.  This will automatically set the same MTU for all vnet devices attached to that switch.  Let's change the MTU size of our admin-vsw from the example above: root@sun # ldm set-vsw mtu=9000 admin-vsw primary Note that that you can set the MTU to any value between 1500 and 16000.  Of course, whatever you set needs to be supported by the physical network, too. Another very common area of network configuration is VLAN tagging. This can be a little confusing - my advise here is to be very clear on what you want, and perhaps draw a little diagram the first few times.  As always, keeping a configuration simple will help avoid errors of all kind.  Nevertheless, VLAN tagging is very usefull to consolidate different networks onto one physical cable.  And as such, this concept needs to be carried over into the virtual world.  Enough of the introduction, here's a little diagram to help in explaining how VLANs work in LDoms: Let's remember that any VLANs not explicitly tagged have the default VLAN ID of 1. In this example, we have a vswitch connected to a physical network that carries untagged traffic (VLAN ID 1) as well as VLANs 11, 22, 33 and 44.  There might also be other VLANs on the wire, but the vswitch will ignore all those packets.  We also have two vnet devices, one for mars and one for venus.  Venus will see traffic from VLANs 33 and 44 only.  For VLAN 44, venus will need to configure a tagged interface "vnet44000".  For VLAN 33, the vswitch will untag all incoming traffic for venus, so that venus will see this as "normal" or untagged ethernet traffic.  This is very useful to simplify guest configuration and also allows venus to perform Jumpstart or AI installations over this network even if the Jumpstart or AI server is connected via VLAN 33.  Mars, on the other hand, has full access to untagged traffic from the outside world, and also to VLANs 11,22 and 33, but not 44.  On the command line, we'd do this like this: root@sun # ldm add-vsw net-dev=nxge2 pvid=1 vid=11,22,33,44 admin-vsw primary root@sun # ldm add-vnet admin-net pvid=1 vid=11,22,33 admin-vsw mars root@sun # ldm add-vnet admin-net pvid=33 vid=44 admin-vsw venus Finally, I'd like to point to a neat little option that will make your live easier in all those cases where configurations tend to change over the live of a guest system.  It's the "id=<somenumber>" option available for both vswitches and vnet devices.  Normally, Solaris in the guest would enumerate network devices sequentially.  However, it has ways of remembering this initial numbering.  This is good in the physical world.  In the virtual world, whenever you unbind (aka power off and disassemble) a guest system, remove and/or add network devices and bind the system again, chances are this numbering will change.  Configuration confusion will follow suit.  To avoid this, nail down the initial numbering by assigning each vnet device it's device-id explicitly: root@sun # ldm add-vnet admin-net id=1 admin-vsw venus Please consult the Admin Guide for details on this, and how to decipher these network ids from Solaris running in the guest. Thanks for reading this far.  Links for further reading are essentially only the Admin Guide and Reference Manual and can be found above.  I hope this is useful and, as always, I welcome any comments.

  Read the article

• No GLX on Intel card with multiseat with additional nVidia card

  - by MeanEYE

  I have multiseat configured and my Xorg has 2 server layouts. One is for nVidia card and other is for Intel card. They both work, but display server assigned to Intel card doesn't have hardware acceleration since DRI and GLX module being used is from nVidia driver. So my question is, can I configure layouts somehow to use right DRI and GLX with each card? My Xorg.conf: Section "ServerLayout" Identifier "Default" Screen 0 "Screen0" 0 0 Option "Xinerama" "0" EndSection Section "ServerLayout" Identifier "TV" Screen 0 "Screen1" 0 0 Option "Xinerama" "0" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL E198WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 610" EndSection Section "Device" Identifier "Device1" Driver "intel" BusID "PCI:0:2:0" Option "AccelMethod" "uxa" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "DFP-0: nvidia-auto-select +1440+0, DFP-1: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Log file for Intel: [ 18.239] X.Org X Server 1.13.0 Release Date: 2012-09-05 [ 18.239] X Protocol Version 11, Revision 0 [ 18.239] Build Operating System: Linux 2.6.24-32-xen x86_64 Ubuntu [ 18.239] Current Operating System: Linux bytewiper 3.5.0-18-generic #29-Ubuntu SMP Fri Oct 19 10:26:51 UTC 2012 x86_64 [ 18.239] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.5.0-18-generic root=UUID=fc0616fd-f212-4846-9241-ba4a492f0513 ro quiet splash [ 18.239] Build Date: 20 September 2012 11:55:20AM [ 18.239] xorg-server 2:1.13.0+git20120920.70e57668-0ubuntu0ricotz (For technical support please see http://www.ubuntu.com/support) [ 18.239] Current version of pixman: 0.26.0 [ 18.239] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 18.239] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 18.239] (==) Log file: "/var/log/Xorg.1.log", Time: Wed Nov 21 18:32:14 2012 [ 18.239] (==) Using config file: "/etc/X11/xorg.conf" [ 18.239] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 18.239] (++) ServerLayout "TV" [ 18.239] (**) |-->Screen "Screen1" (0) [ 18.239] (**) | |-->Monitor "Monitor1" [ 18.240] (**) | |-->Device "Device1" [ 18.240] (**) Option "Xinerama" "0" [ 18.240] (==) Automatically adding devices [ 18.240] (==) Automatically enabling devices [ 18.240] (==) Automatically adding GPU devices [ 18.240] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist. [ 18.240] Entry deleted from font path. [ 18.240] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/Type1, built-ins [ 18.240] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 18.240] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 18.240] (II) Loader magic: 0x7f6917944c40 [ 18.240] (II) Module ABI versions: [ 18.240] X.Org ANSI C Emulation: 0.4 [ 18.240] X.Org Video Driver: 13.0 [ 18.240] X.Org XInput driver : 18.0 [ 18.240] X.Org Server Extension : 7.0 [ 18.240] (II) config/udev: Adding drm device (/dev/dri/card0) [ 18.241] (--) PCI: (0:0:2:0) 8086:0152:1043:84ca rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64 [ 18.241] (--) PCI:*(0:1:0:0) 10de:104a:1458:3546 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288 [ 18.241] (II) Open ACPI successful (/var/run/acpid.socket) [ 18.241] Initializing built-in extension Generic Event Extension [ 18.241] Initializing built-in extension SHAPE [ 18.241] Initializing built-in extension MIT-SHM [ 18.241] Initializing built-in extension XInputExtension [ 18.241] Initializing built-in extension XTEST [ 18.241] Initializing built-in extension BIG-REQUESTS [ 18.241] Initializing built-in extension SYNC [ 18.241] Initializing built-in extension XKEYBOARD [ 18.241] Initializing built-in extension XC-MISC [ 18.241] Initializing built-in extension SECURITY [ 18.241] Initializing built-in extension XINERAMA [ 18.241] Initializing built-in extension XFIXES [ 18.241] Initializing built-in extension RENDER [ 18.241] Initializing built-in extension RANDR [ 18.241] Initializing built-in extension COMPOSITE [ 18.241] Initializing built-in extension DAMAGE [ 18.241] Initializing built-in extension MIT-SCREEN-SAVER [ 18.241] Initializing built-in extension DOUBLE-BUFFER [ 18.241] Initializing built-in extension RECORD [ 18.241] Initializing built-in extension DPMS [ 18.241] Initializing built-in extension X-Resource [ 18.241] Initializing built-in extension XVideo [ 18.241] Initializing built-in extension XVideo-MotionCompensation [ 18.241] Initializing built-in extension XFree86-VidModeExtension [ 18.241] Initializing built-in extension XFree86-DGA [ 18.241] Initializing built-in extension XFree86-DRI [ 18.241] Initializing built-in extension DRI2 [ 18.241] (II) LoadModule: "glx" [ 18.241] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/libglx.so [ 18.247] (II) Module glx: vendor="NVIDIA Corporation" [ 18.247] compiled for 4.0.2, module version = 1.0.0 [ 18.247] Module class: X.Org Server Extension [ 18.247] (II) NVIDIA GLX Module 310.19 Thu Nov 8 01:12:43 PST 2012 [ 18.247] Loading extension GLX [ 18.247] (II) LoadModule: "intel" [ 18.248] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 18.248] (II) Module intel: vendor="X.Org Foundation" [ 18.248] compiled for 1.13.0, module version = 2.20.13 [ 18.248] Module class: X.Org Video Driver [ 18.248] ABI class: X.Org Video Driver, version 13.0 [ 18.248] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server, Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2), Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2), Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2), Haswell Server (GT2+), Haswell SDV Desktop (GT1), Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+), Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2), Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1), Haswell SDV Server (GT2), Haswell SDV Server (GT2+), Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2), Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1), Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+), Haswell ULT Server (GT1), Haswell ULT Server (GT2), Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1), Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+), Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2), Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1), Haswell CRW Server (GT2), Haswell CRW Server (GT2+), ValleyView PO board [ 18.248] (++) using VT number 8 [ 18.593] (II) intel(0): using device path '/dev/dri/card0' [ 18.593] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 18.593] (==) intel(0): RGB weight 888 [ 18.593] (==) intel(0): Default visual is TrueColor [ 18.593] (**) intel(0): Option "AccelMethod" "uxa" [ 18.593] (--) intel(0): Integrated Graphics Chipset: Intel(R) Ivybridge Desktop (GT1) [ 18.593] (**) intel(0): Relaxed fencing enabled [ 18.593] (**) intel(0): Wait on SwapBuffers? enabled [ 18.593] (**) intel(0): Triple buffering? enabled [ 18.593] (**) intel(0): Framebuffer tiled [ 18.593] (**) intel(0): Pixmaps tiled [ 18.593] (**) intel(0): 3D buffers tiled [ 18.593] (**) intel(0): SwapBuffers wait enabled ... [ 20.312] (II) Module fb: vendor="X.Org Foundation" [ 20.312] compiled for 1.13.0, module version = 1.0.0 [ 20.312] ABI class: X.Org ANSI C Emulation, version 0.4 [ 20.312] (II) Loading sub module "dri2" [ 20.312] (II) LoadModule: "dri2" [ 20.312] (II) Module "dri2" already built-in [ 20.312] (==) Depth 24 pixmap format is 32 bpp [ 20.312] (II) intel(0): [DRI2] Setup complete [ 20.312] (II) intel(0): [DRI2] DRI driver: i965 [ 20.312] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled [ 20.312] (II) UXA(0): Driver registered support for the following operations: [ 20.312] (II) solid [ 20.312] (II) copy [ 20.312] (II) composite (RENDER acceleration) [ 20.312] (II) put_image [ 20.312] (II) get_image [ 20.312] (==) intel(0): Backing store disabled [ 20.312] (==) intel(0): Silken mouse enabled [ 20.312] (II) intel(0): Initializing HW Cursor [ 20.312] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 20.313] (**) intel(0): DPMS enabled [ 20.313] (==) intel(0): Intel XvMC decoder enabled [ 20.313] (II) intel(0): Set up textured video [ 20.313] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 20.313] (II) intel(0): direct rendering: DRI2 Enabled [ 20.313] (==) intel(0): hotplug detection: "enabled" [ 20.332] (--) RandR disabled [ 20.335] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 20.335] (II) intel(0): Setting screen physical size to 508 x 285 [ 20.338] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 20.340] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 20.340] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 20.340] (II) LoadModule: "evdev" [ 20.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so

  Read the article

• High Server Load cannot figure out why

  - by Tim Bolton

  My server is currently running CentOS 5.2, with WHM 11.34. Currently, we're at 6.43 to 12 for a load average. The sites that we're hosting are taking a lot time to respond and resolve. top doesn't show anything out of the ordinary and iftop doesn't show a lot of traffic. We have many resellers, and some not so good at writing code, how can we find the culprit? vmstat output: vmstat procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 0 2 84 78684 154916 1021080 0 0 72 274 0 14 6 3 80 12 0 top output (ordered by %CPU) top - 21:44:43 up 5 days, 10:39, 3 users, load average: 3.36, 4.18, 4.73 Tasks: 222 total, 3 running, 219 sleeping, 0 stopped, 0 zombie Cpu(s): 5.8%us, 2.3%sy, 0.2%ni, 79.6%id, 11.8%wa, 0.0%hi, 0.2%si, 0.0%st Mem: 2074580k total, 1863044k used, 211536k free, 174828k buffers Swap: 2040212k total, 84k used, 2040128k free, 987604k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:45.87 mysqld 21772 igniteth 17 0 23200 7152 3932 R 4 0.3 0:00.02 php 1586 root 10 -5 0 0 0 S 2 0.0 11:45.19 kjournald 21759 root 15 0 2416 1024 732 R 2 0.0 0:00.01 top 1 root 15 0 2156 648 560 S 0 0.0 0:26.31 init 2 root RT 0 0 0 0 S 0 0.0 0:00.35 migration/0 3 root 34 19 0 0 0 S 0 0.0 0:00.32 ksoftirqd/0 4 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 5 root RT 0 0 0 0 S 0 0.0 0:02.00 migration/1 6 root 34 19 0 0 0 S 0 0.0 0:00.11 ksoftirqd/1 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 8 root RT 0 0 0 0 S 0 0.0 0:01.29 migration/2 9 root 34 19 0 0 0 S 0 0.0 0:00.26 ksoftirqd/2 10 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/2 11 root RT 0 0 0 0 S 0 0.0 0:00.90 migration/3 12 root 34 19 0 0 0 R 0 0.0 0:00.20 ksoftirqd/3 13 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/3 top output (ordered by CPU time) top - 21:46:12 up 5 days, 10:41, 3 users, load average: 2.88, 3.82, 4.55 Tasks: 217 total, 1 running, 216 sleeping, 0 stopped, 0 zombie Cpu(s): 3.7%us, 2.0%sy, 2.0%ni, 67.2%id, 25.0%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 2074580k total, 1959516k used, 115064k free, 183116k buffers Swap: 2040212k total, 84k used, 2040128k free, 1090308k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ TIME COMMAND 32367 root 16 0 215m 212m 1548 S 0 10.5 62:03.63 62:03 tailwatchd 1586 root 10 -5 0 0 0 S 0 0.0 11:45.27 11:45 kjournald 1576 root 10 -5 0 0 0 S 0 0.0 2:37.86 2:37 kjournald 27722 root 16 0 2556 1184 800 S 0 0.1 1:48.94 1:48 top 15930 mysql 15 0 138m 46m 4380 S 4 2.3 1:48.63 1:48 mysqld 2932 root 34 19 0 0 0 S 0 0.0 1:41.05 1:41 kipmi0 226 root 10 -5 0 0 0 S 0 0.0 1:34.33 1:34 kswapd0 2671 named 25 0 74688 7400 2116 S 0 0.4 1:23.58 1:23 named 3229 root 15 0 10300 3348 2724 S 0 0.2 0:40.85 0:40 sshd 1580 root 10 -5 0 0 0 S 0 0.0 0:30.62 0:30 kjournald 1 root 17 0 2156 648 560 S 0 0.0 0:26.32 0:26 init 2616 root 15 0 1816 576 480 S 0 0.0 0:23.50 0:23 syslogd 1584 root 10 -5 0 0 0 S 0 0.0 0:18.67 0:18 kjournald 4342 root 34 19 27692 11m 2116 S 0 0.5 0:18.23 0:18 yum-updatesd 8044 bollingp 15 0 3456 2036 740 S 1 0.1 0:15.56 0:15 imapd 26 root 10 -5 0 0 0 S 0 0.0 0:14.18 0:14 kblockd/1 7989 gmailsit 16 0 3196 1748 736 S 0 0.1 0:10.43 0:10 imapd iostat -xtk 1 10 output [root@server1 tmp]# iostat -xtk 1 10 Linux 2.6.18-53.el5 12/18/2012 Time: 09:51:06 PM avg-cpu: %user %nice %system %iowait %steal %idle 5.83 0.19 2.53 11.85 0.00 79.60 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 1.37 118.83 18.70 54.27 131.47 692.72 22.59 4.90 67.19 3.10 22.59 sdb 0.35 39.33 20.33 61.43 158.79 403.22 13.75 5.23 63.93 3.77 30.80 Time: 09:51:07 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.50 0.00 0.50 24.00 0.00 74.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 25.00 2.00 2.00 128.00 108.00 118.00 0.03 7.25 4.00 1.60 sdb 0.00 16.00 41.00 145.00 200.00 668.00 9.33 107.92 272.72 5.38 100.10 Time: 09:51:08 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.00 0.00 1.50 29.50 0.00 67.00 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 95.00 3.00 33.00 12.00 480.00 27.33 0.07 1.72 1.31 4.70 sdb 0.00 14.00 1.00 228.00 4.00 960.00 8.42 143.49 568.01 4.37 100.10 Time: 09:51:09 PM avg-cpu: %user %nice %system %iowait %steal %idle 13.28 0.00 2.76 21.30 0.00 62.66 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 21.00 1.00 19.00 16.00 192.00 20.80 0.06 3.55 1.30 2.60 sdb 0.00 36.00 28.00 181.00 124.00 884.00 9.65 121.16 617.31 4.79 100.10 Time: 09:51:10 PM avg-cpu: %user %nice %system %iowait %steal %idle 4.74 0.00 1.50 25.19 0.00 68.58 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 20.00 3.00 15.00 12.00 136.00 16.44 0.17 7.11 3.11 5.60 sdb 0.00 0.00 103.00 60.00 544.00 248.00 9.72 52.35 545.23 6.14 100.10 Time: 09:51:11 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.24 0.00 1.24 25.31 0.00 72.21 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 75.00 4.00 28.00 16.00 416.00 27.00 0.08 3.72 2.03 6.50 sdb 2.00 9.00 124.00 17.00 616.00 104.00 10.21 3.73 213.73 7.10 100.10 Time: 09:51:12 PM avg-cpu: %user %nice %system %iowait %steal %idle 1.00 0.00 0.75 24.31 0.00 73.93 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 24.00 1.00 9.00 4.00 132.00 27.20 0.01 1.20 1.10 1.10 sdb 4.00 40.00 103.00 48.00 528.00 212.00 9.80 105.21 104.32 6.64 100.20 Time: 09:51:13 PM avg-cpu: %user %nice %system %iowait %steal %idle 2.50 0.00 1.75 23.25 0.00 72.50 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 125.74 3.96 46.53 15.84 689.11 27.92 0.20 4.06 2.41 12.18 sdb 2.97 0.00 91.09 84.16 419.80 471.29 10.17 85.85 590.78 5.66 99.11 Time: 09:51:14 PM avg-cpu: %user %nice %system %iowait %steal %idle 0.75 0.00 0.50 24.94 0.00 73.82 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 88.00 1.00 7.00 4.00 380.00 96.00 0.04 4.38 3.00 2.40 sdb 3.00 7.00 111.00 44.00 540.00 208.00 9.65 18.58 581.79 6.46 100.10 Time: 09:51:15 PM avg-cpu: %user %nice %system %iowait %steal %idle 11.03 0.00 3.26 26.57 0.00 59.15 Device: rrqm/s wrqm/s r/s w/s rkB/s wkB/s avgrq-sz avgqu-sz await svctm %util sda 0.00 145.00 7.00 53.00 28.00 792.00 27.33 0.15 2.50 1.55 9.30 sdb 1.00 0.00 155.00 0.00 800.00 0.00 10.32 2.85 18.63 6.46 100.10 [root@server1 tmp]# MySQL Show Full Processlist mysql> show full processlist; +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | Id | User | Host | db | Command | Time | State | Info | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ | 1 | DB_USER_ONE | localhost | DB_ONE | Query | 3 | waiting for handler insert | INSERT DELAYED INTO defers (mailtime,msgid,email,transport_method,message,host,ip,router,deliveryuser,deliverydomain) VALUES(FROM_UNIXTIME('1355879748'),'1TivwL-0003y8-8l','[email protected]','remote_smtp','SMTP error from remote mail server after initial connection: host mx1.mail.tw.yahoo.com [203.188.197.119]: 421 4.7.0 [TS01] Messages from 75.125.90.146 temporarily deferred due to user complaints - 4.16.55.1; see http://postmaster.yahoo.com/421-ts01.html','mx1.mail.tw.yahoo.com','203.188.197.119','lookuphost','','') | | 2 | DELAYED | localhost | DB_ONE | Delayed insert | 52 | insert | | | 3 | DELAYED | localhost | DB_ONE | Delayed insert | 68 | insert | | | 911 | DELAYED | localhost | DB_ONE | Delayed insert | 99 | Waiting for INSERT | | | 993 | DB_USER_TWO | localhost | DB_TWO | Sleep | 832 | | NULL | | 994 | DB_USER_ONE | localhost | DB_ONE | Query | 185 | Locked | delete from failures where FROM_UNIXTIME(UNIX_TIMESTAMP(NOW())-1296000) > mailtime | | 1102 | DB_USER_THREE | localhost | DB_THREE | Query | 29 | NULL | commit | | 1249 | DB_USER_FOUR | localhost | DB_FOUR | Query | 13 | NULL | commit | | 1263 | root | localhost | DB_FIVE | Query | 0 | NULL | show full processlist | | 1264 | DB_USER_SIX | localhost | DB_SIX | Query | 3 | NULL | commit | +------+---------------+-----------+-----------------------+----------------+------+----------------------------+----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+ 10 rows in set (0.00 sec)

  Read the article

• Bacula windows client could not connect to Bacula director

  - by pr0f-r00t

  I have a Bacula server on my Linux Debian squeeze host (Bacula version 5.0.2) and a Bacula client on Windows XP SP3. On my network each client can see each other, can share files and can ping. On my local server I could run bconsole and the server responds but when I run bconsole or bat on my windows client the server does not respond. Here are my configuration files: bacula-dir.conf: # # Default Bacula Director Configuration file # # The only thing that MUST be changed is to add one or more # file or directory names in the Include directive of the # FileSet resource. # # For Bacula release 5.0.2 (28 April 2010) -- debian squeeze/sid # # You might also want to change the default email address # from root to your address. See the "mail" and "operator" # directives in the Messages resource. # Director { # define myself Name = nima-desktop-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 1 Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" # Console password Messages = Daemon DirAddress = 127.0.0.1 # DirAddress = 72.16.208.1 } JobDefs { Name = "DefaultJob" Type = Backup Level = Incremental Client = nima-desktop-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultJob" } #Job { # Name = "BackupClient2" # Client = nima-desktop2-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=nima-desktop-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /nonexistant/path/to/file/archive/dir/bacula-restores } # job for vmware windows host Job { Name = "nimaxp-fd" Type = Backup Client = nimaxp-fd FileSet = "nimaxp-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # job for vmware windows host Job { Name = "arg-michael-fd" Type = Backup Client = nimaxp-fd FileSet = "arg-michael-fs" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = Default Write Bootstrap = "/var/bacula/working/rsys-win-www-1-fd.bsr" #Change this } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } # # Put your list of files here, preceded by 'File =', one per line # or include an external list with: # # File = <file-name # # Note: / backs up everything on the root partition. # if you have other partitions such as /usr or /home # you will probably want to add them too. # # By default this is defined to point to the Bacula binary # directory to give a reasonable FileSet to backup to # disk storage during initial testing. # File = /usr/sbin } # # If you backup the root directory, the following two excluded # files can be useful # Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "nimaxp-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # List of files to be backed up FileSet { Name = "arg-michael-fs" Enable VSS = yes Include { Options { signature = MD5 } File = "C:\softwares" File = C:/softwares File = "C:/softwares" } } # # When to do the backups, full backup on first sunday of the month, # differential (i.e. incremental since full) every other sunday, # and incremental backups other days Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = nima-desktop-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V6" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = nimaxp-fd Address = nimaxp FDPort = 9102 Catalog = MyCatalog Password = "Ku8F1YAhDz5EMUQjiC9CcSw95Aho9XbXailUmjOaAXJP" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # Client file service for vmware windows host Client { Name = arg-michael-fd Address = 192.168.0.61 FDPort = 9102 Catalog = MyCatalog Password = "b4E9FU6s/9Zm4BVFFnbXVKhlyd/zWxj0oWITKK6CALR/" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = nima-desktop2-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "_MOfxEuRzxijc0DIMcBqtyx9iW1tzE7V62" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" Device = FileStorage Media Type = File } # Definition of DDS tape storage device #Storage { # Name = DDS-4 # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # password for Storage daemon # Device = DDS-4 # must be same as Device in Storage daemon # Media Type = DDS-4 # must be same as MediaType in Storage daemon # Autochanger = yes # enable for autochanger device #} # Definition of 8mm tape storage device #Storage { # Name = "8mmDrive" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "Exabyte 8mm" # MediaType = "8mm" #} # Definition of DVD storage device #Storage { # Name = "DVD" # Do not use "localhost" here # Address = localhost # N.B. Use a fully qualified name here # SDPort = 9103 # Password = "Cj-gtxugC4dAymY01VTSlUgMTT5LFMHf9" # Device = "DVD Writer" # MediaType = "DVD" #} # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; dbuser = ""; dbpassword = "" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard # # NOTE! If you send to two email or more email addresses, you will need # to replace the %r in the from field (-f part) with a single valid # email address in both the mailcommand and the operatorcommand. # What this does is, it sets the email address that emails would display # in the FROM field, which is by default the same email as they're being # sent to. However, if you send email to more than one address, then # you'll have to set the FROM address manually, to a single address. # for example, a '[email protected]', is better since that tends to # tell (most) people that its coming from an automated source. # mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = nima-desktop-mon Password = "-T0h6HCXWYNy0wWqOomysMvRGflQ_TA6c" CommandACL = status, .status } bacula-fd.conf on client: # # Default Bacula File Daemon Configuration file # # For Bacula release 5.0.3 (08/05/10) -- Windows MinGW32 # # There is not much to change here except perhaps the # File daemon Name # # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = nimaxp-fd FDport = 9102 # where we listen for the director WorkingDirectory = "C:\\Program Files\\Bacula\\working" Pid Directory = "C:\\Program Files\\Bacula\\working" # Plugin Directory = "C:\\Program Files\\Bacula\\plugins" Maximum Concurrent Jobs = 10 } # # List Directors who are permitted to contact this File daemon # Director { Name = Nima-desktop-dir Password = "Cv70F6pf1t6pBopT4vQOnigDrR0v3L" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = nimaxp-mon Password = "q5b5g+LkzDXorMViFwOn1/TUnjUyDlg+gRTBp236GrU3" Monitor = yes } # Send all messages except skipped files back to Director Messages { Name = Standard director = Nima-desktop = all, !skipped, !restored } I have checked my firewall and disabled the firewall but it doesn't work.

  Read the article

• Ubuntu 14.04:LTS , HPLIP loses USB connection to HP laserjet

  - by Gareth

  This is my first post, so please let me know if i have inadvertanly broken any rules. Problem There seems to be a problem with HPLIP and USB connections in ubuntu 14.04LTS. After upgrading i managed to get the printing to work but today it has broken. Initial Issue (Solved) After upgrading to unbutntu 14.04 LTS my printer lHP LaserJet 1018 stopped printing (code=12) Looking through the Forumsthere are several issues with printitng and HPLIP so I was able to troubleshoot this. The steps I took were : Reran HPdoctor Ran hp-check Un-installed and installed the latest version of HPLIP (3.14.4) Checked the USB connections lsusb and lsusb-v Re-ran hpcheck Removed the printer from HPLIP Re-ran hpcheck Manually configued HPLIP to the printer hp-setup-g <xxx:yyy> And this worked HPLIP was able to see the printer in the USB , test page printed and was happily working for a few weeks. Current Issue Printer Not working However today my wife complains the printer is not working and checking see that although HPLIP has the same error code and did not seem to be able to see the printer although running lsusb could see the printer. Initially thought this may be due to usb given a new bus/device after being turned on and off and went to repeat the steps above at the moment still seeing an error in that the HPLIP is complaining that it cannot see the device **error: Device not found. Please make sure your printer is properly connected and powered-on.** current Observations lsusb output ## Bus 002 Device 007: ID 03f0:4117 Hewlett-Packard LaserJet 1018 sudo hp-check output *> "duan@duan-Lenovo-B550:~$ sudo hp-check [sudo] password for duan: Saving output in log file: /home/duan/hp-check.log HP Linux Imaging and Printing System (ver. 3.14.4) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Full Output output of hp-setup -g 002:007 window box "device not found please make sure your printer is properly connected and powered on" duan@duan-Lenovo-B550:~$ sudo hp-setup -g 002:007 [sudo] password for duan: > HP Linux Imaging and Printing System (ver. 3.14.4) Printer/Fax Setup > Utility ver. 9.0 > > Copyright (c) 2001-13 Hewlett-Packard Development Company, LP This > software comes with ABSOLUTELY NO WARRANTY. This is free software, and > you are welcome to distribute it under certain conditions. See COPYING > file for more details. > > hp-setup[18461]: debug: param=002:007 hp-setup[18461]: debug: > selected_device_name=None Fontconfig error: > "/etc/fonts/conf.d/65-khmer.conf", line 14: out of memory Fontconfig > error: "/etc/fonts/conf.d/65-khmer.conf", line 23: out of memory > Fontconfig error: "/etc/fonts/conf.d/65-khmer.conf", line 32: out of > memory hp-setup[18461]: debug: Sys.argv=['/usr/bin/hp-setup', '-g', > '002:007'] printer_name=None param=002:007 jd_port=1 device_uri=None > remove=False Searching for device... hp-setup[18461]: debug: Trying > USB with bus=002 dev=007... hp-setup[18461]: debug: Not found. > hp-setup[18461]: debug: Trying serial number 002:007 hp-setup[18461]: > debug: Probing bus: usb hp-setup[18461]: debug: Probing bus: par > error: Device not found. Please make sure your printer is properly > connected and powered-on. hp-setup[18461]: debug: Starting GUI loop. .. USB lead Works with the Windows 7 laptop Printer Works with windows 7 laptop Questions Is this a Bug with HPLIP or an issue with laptop/printer? Supplementary question if it is a bug what information is needed and where should it be sent ? Any suggestions on how to get the printer to work correctly with Ubuntu 14.04LTS/HPLIP 13.4.3 so that it stays working ?

  Read the article

• Qt: how to build QML apps for Symbian devices?

  - by DaveJohnston

  I am pretty new to Qt and I have just started looking at QML. There are some sample applications included with the Nokia Qt SDK for Symbian and I have managed to load them into Qt Creator and run them using the QML Viewer application on the desktop. I would like to try some of the samples out on a device, but I am totally clueless as to how I would go about getting the qml files to run on a device. Are they first packaged into a sis file and installed or is the folder simply copied over? If so how is the app started on the device? Having done some googling the only information I seem to be able to find says that the Qt libraries available for Symbian devices at the moment is only 4.6.3 whereas version 4.7.0 is required for QML apps? Does this mean that I won't be able to run QML apps on a device at the moment? (Device is S60 5th Edition) Any help or pointers in the right direction for more information would be much appreciated.

  Read the article

• Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

  - by Tim Evans

  Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

  Read the article

• C# SerialPort.GetPortNames() behavior

  - by Gunner

  In my C# 2008 application, I use the SerialPort.GetPortNames() function to retrieve the list of currently available ports. What I have noticed is, when ever I plug in a USB device, it's port number i s shown in the list on my Application and when I unplug it and refresh the list, the port number is no longer there. One phase of the application involves reading/writing data from/to the device continuously. Now, my expectation is, If I unplug the device during the operation and get the current Port list using SerialPort.GetPortNames(), the Port Name will not be there and I can use that to make the decision that the device has been unplugged. To my surprise, the Port name is still found despite having it removed Why is the program behaving like this? The port name isn't listed when in no-communication mode. Does it have something to do with the device being removed when it's communicating?

  Read the article

• Adding a Network Loopback Adapter to Windows 8

  - by Greg Low

  I have to say that I continue to be frustrated with finding out how to do things in Windows 8. Here's another one and it's recorded so it might help someone else. I've also documented what I tried so that if anyone from the product group ever reads this, they'll understand how I searched for it and might try to make it easier.I wanted to add a network loopback adapter, to have a fixed IP address to work with when using an "internal" network with Hyper-V. (The fact that I even need to do this is also painful. I don't know why Hyper-V can't make it easy to work with host system folders, etc. as easily as I can with VirtualPC, VirtualBox, etc. but that's a topic for another day).In the end, what I needed was a known IP address on the same network that my guest OS was using, via the internal network (which allows connectivity from the host OS to/from guest OS's).I started by looking in the network adapters areas but there is no "add" functionality there. Realising that this was likely to be another unexpected challenge, I resorted to searching for info on doing this. I found KB article 2777200 entitled "Installing the Microsoft Loopback Adapter in Windows 8 and Windows Server 2012". Aha, I thought that's what I'd need. It describes the symptom as "You are trying to install the Microsoft Loopback Adapter, but are unable to find it." and that certainly sounded like me. There's a certain irony in documenting that something's hard to find instead of making it easier to find. Anyway, you'd hope that in that article, they'd then provide a step by step example of how to do it, but what they supply is this: The Microsoft Loopback Adapter was renamed in Windows 8 and Windows Server 2012. The new name is "Microsoft KM-TEST Loopback Adapter". When using the Add Hardware Wizard to manually add a network adapter, choose Manufacturer "Microsoft" and choose network adapter "Microsoft KM-TEST Loopback Adapter".The trick with this of course is finding the "Add Hardware Wizard". In Control Panel -> Hardware and Sound, there are options to "Add a device" and for "Device Manager". I tried the "Add a device" wizard (seemed logical to me) but after that wizard tries it's best, it just tells you that there isn't any hardware that it thinks it needs to install. It offers a link for when you can't find what you're looking for, but that leads to a generic help page that tells you how to do things like turning on your printer.In Device Manager, I checked the options in the program menus, and nothing useful was present. I even tried right-clicking "Network adapters", hoping that would lead to an option to add one, also to no avail.So back to the search engine I went, to try to find out where the "Add Hardware Wizard" is. Turns out I was in the right place in Device Manager, but I needed to right-click the computer's name, and choose "Add Legacy Hardware". No doubt that hasn't changed location lately but it's a while since I needed to add one so I'd forgotten. Regardless, I'm left wondering why it couldn't be in the menu as well.Anyway, for a step by step list, you need to do the following:1. From Control Panel, select "Device Manager" under the "Devices and Printers" section of the "Hardware and Sound" tab.2. Right-click the name of the computer at the top of the tree, and choose "Add Legacy Hardware".3. In the "Welcome to the Add Hardware Wizard" window, click Next.4. In the "The wizard can help you install other hardware" window, choose "Install the hardware that I manually select from a list" option and click Next.5. In the "The wizard did not find any new hardware on your computer" window, click Next.6. In the "From the list below, select the type of hardware you are installing" window, select "Network Adapters" from the list, and click Next.7. In the "Select Network Adapter" window, from the Manufacturer list, choose Microsoft, then in the Network Adapter window, choose "Microsoft KM-TEST Loopback Adapter", then click Next.8. In the "The wizard is ready to install your hardware" window, click Next.9. In the "Completing the Add Hardware Wizard" window, click Finish.Then you need to continue to set the IP address, etc.10. Back in Control Panel, select the "Network and Internet" tab, click "View Network Status and Tasks".11. In the "View your basic network information and set up connections" window, click "Change adapter settings".12. Right-click the new adapter that has been added (find it in the list by checking the device name of "Microsoft KM-TEST Loopback Adapter"), and click Properties.   

  Read the article

• How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

  - by Dave B.

  I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

  Read the article

• Using accelerometer to detect iPad lock switch trigger?

  - by DevDevDev

  So for complicated reasons I am managing view rotations myself, and am only implementing UIDeviceOrientationPortrait as the autorotating orientation. Anyway, when one clicks the screen lock on the iPad, the device will rotate to UIDeviceOrientationPortrait, which will cause my code to rotate, which I do not want to happen. For instance of the user is holding the device in "landscape mode", i.e. I have already manually rotated the UI to landscape mode, and he/she clicks the screen lock, it will rotate the UI to portrait mode, even though the user did not move the device at all. So somehow I need a way to differentiate between rotations to portrait mode occuring from the screen lock, and those occuring from device rotation. As such, I would like somehow to use the accelerometer to detect whether or not the device was actually 'rotated' or whether the button was clicked. Thanks!

  Read the article

• Windows XP Home Edition SP3 cant recognise PCMIA SD Card

  - by Pozo

  System Specifications: Laptop : Dell Inspiron 6000 OS: Windows Home Edition SP3 SD Adapter: Hagiwara Smart Media Adapter I inserted the card into the slot, windows xp recognises the device, lists the pcmia controller on the device manager list, an entry appears under the IDE ATA/ATAPI category on the device manager as well. However, the device does not show under my computer and the driver does not get assigned a letter number. I checked the system logs from the device manager and there were no logged errors. Checking the Hagiwara support website, the manufacturer indicates that the adapter driver is the same as the windows xp pcmia controller. Checking Dell's website, no specific drivers were listed for that either. General Search on the web indicates that multiple people face similar problems with their SD cards, yet none actually spell out the route issue that causes this. Please let me know if you have any suggestions for further debugging. Thanks in advance

  Read the article

• Specs, Form and Function – What am I Missing?

  - by Barry Shulam

  0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

  Read the article

• Best Practices - Dynamic Reconfiguration

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (formerly named Logical Domains) Overview of dynamic Reconfiguration Oracle VM Server for SPARC supports Dynamic Reconfiguration (DR), making it possible to add or remove resources to or from a domain (virtual machine) while it is running. This is extremely useful because resources can be shifted to or from virtual machines in response to load conditions without having to reboot or interrupt running applications. For example, if an application requires more CPU capacity, you can add CPUs to improve performance, and remove them when they are no longer needed. You can use even use Dynamic Resource Management (DRM) policies that automatically add and remove CPUs to domains based on load. How it works (in broad general terms) Dynamic Reconfiguration is done in coordination with Solaris, which recognises a hypervisor request to change its virtual machine configuration and responds appropriately. In essence, Solaris receives a message saying "you now have 16 more CPUs numbered 16 to 31" or "8GB more RAM starting at address X" or "here's a new network or disk device - have fun with it". These actions take very little time. Solaris then can start using the new resource. In the case of added CPUs, that means dispatching processes and potentially binding interrupts to the new CPUs. For memory, Solaris adds the new memory pages to its "free" list and starts using them. Comparable actions occur with network and disk devices: they are recognised by Solaris and then used. Removing is the reverse process: after receiving the DR message to free specific CPUs, Solaris unbinds interrupts assigned to the CPUs and stops dispatching process threads. That takes very little time. primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m primary # ldm set-core 5 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.2% 6d 22h 29m ldom1 active -n---- 5000 40 8G 0.1% 6h 59m primary # ldm set-core 2 ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 1.0% 6d 22h 29m ldom1 active -n---- 5000 16 8G 0.9% 6h 59m Memory pages are vacated by copying their contents to other memory locations and wiping them clean. Solaris may have to swap memory contents to disk if the remaining RAM isn't enough to hold all the contents. For this reason, deallocating memory can take longer on a loaded system. Even on a lightly loaded system it took several 7 or 8 seconds to switch the domain below between 8GB and 24GB of RAM. primary # ldm set-mem 24g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.1% 6d 22h 36m ldom1 active -n---- 5000 16 24G 0.2% 7h 6m primary # ldm set-mem 8g ldom1 primary # ldm list NAME STATE FLAGS CONS VCPU MEMORY UTIL UPTIME primary active -n-cv- SP 16 4G 0.7% 6d 22h 37m ldom1 active -n---- 5000 16 8G 0.3% 7h 7m What if the device is in use? (this is the anecdote that inspired this blog post) If CPU or memory is being removed, releasing it pretty straightforward, using the method described above. The resources are released, and Solaris continues with less capacity. It's not as simple with a network or I/O device: you don't want to yank a device out from underneath an application that might be using it. In the following example, I've added a virtual network device to ldom1 and want to take it away, even though it's been plumbed. primary # ldm rm-vnet vnet19 ldom1 Guest LDom returned the following reason for failing the operation: Resource Information ---------------------------------------------------------- ----------------------- /devices/virtual-devices@100/channel-devices@200/network@1 Network interface net1 VIO operation failed because device is being used in LDom ldom1 Failed to remove VNET instance That's what I call a helpful error message - telling me exactly what was wrong. In this case the problem is easily solved. I know this NIC is seen in the guest as net1 so: ldom1 # ifconfig net1 down unplumb Now I can dispose of it, and even the virtual switch I had created for it: primary # ldm rm-vnet vnet19 ldom1 primary # ldm rm-vsw primary-vsw9 If I had to take away the device disruptively, I could have used ldm rm-vnet -f but that could disrupt whoever was using it. It's better if that can be avoided. Summary Oracle VM Server for SPARC provides dynamic reconfiguration, which lets you modify a guest domain's CPU, memory and I/O configuration on the fly without reboot. You can add and remove resources as needed, and even automate this for CPUs by setting up resource policies. Taking things away can be more complicated than giving, especially for devices like disks and networks that may contain application and system state or be involved in a transaction. LDoms and Solaris cooperative work together to coordinate resource allocation and de-allocation in a safe and effective way. For best practices, use dynamic reconfiguration to make the best use of your system's resources.

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

• Tab widget example not running

  - by michbeck

  I'm trying to reproduce the tabwidget example (http://developer.android.com/resources/tutorials/views/hello-tabwidget.html). I'm not really sure what's the problem, I got no errors while compiling, but i cannot see the application on the emulators screen. It would be excellent if maybe anyone could have a look at my classes and tell me what's my mistake? I've packed my project here: http://etanto.com/TabTest.zip here's the console dump while the run: [2010-06-10 09:18:34 - TabTest] Launching a new emulator with Virtual Device 'Virtual1' [2010-06-10 09:18:35 - TabTest] New emulator found: emulator-5554 [2010-06-10 09:18:35 - TabTest] Waiting for HOME ('android.process.acore') to be launched... [2010-06-10 09:19:05 - TabTest] WARNING: Application does not specify an API level requirement! [2010-06-10 09:19:05 - TabTest] Device API version is 8 (Android 2.2) [2010-06-10 09:19:05 - TabTest] HOME is up on device 'emulator-5554' [2010-06-10 09:19:05 - TabTest] Uploading TabTest.apk onto device 'emulator-5554' [2010-06-10 09:19:05 - TabTest] Installing TabTest.apk... [2010-06-10 09:19:22 - TabTest] Success! [2010-06-10 09:19:22 - TabTest] \TabTest\bin\TabTest.apk installed on device [2010-06-10 09:19:22 - TabTest] Done!

  Read the article

• Installing app on Devices(iPhone/iPod)

  - by Shakti

  Hi, I have developed an application for iPhone and iPod touch. Now i want to install that app on the device. I have created a provisioning profile for the particular device. My query is that, now to install the app on a device I have to add the provisioning profile of that device to xcode and after selecting the developer in build option in project info pane i build the project and send the build and provisioning profile to the user. Is there any to install the app without doing the above task of building the project with the provisioning profile. Means i have a build of an app and a newly downloaded provisioning profile. I will send the user both build and profile in a zip file. will the user be able to install the app on his/her device?

  Read the article

• UIWebView goBack method acts differently on different devices

  - by maxpower

  First Device: 8gb 2nd gen Version: 3.1.3 (7E18) Model: MB528LL Second Device: 32gb 3rd gen Version: 3.1.3 (7E18) Model: MC008LL When I call goBack on the 8gb device, shouldStartLoadWithRequest:navigationType: is called When I call goBack on the 32gb device, shouldStartLoadWithRequest:navigationType: is not called I am not doing any caching (not like it works anyway). To make sure it wasn't caching I removed any possible caching via the request object's cache policy and removing all cache whenever webViewDidFinishLoading is called. Same app, same url, everything is the same but the device itself. Why? FYI: shouldStartLoadWithRequest:navigationType: is called on the simulator when goBack is called

  Read the article

• Noob tab widget example not running

  - by michbeck

  hey all, i'm trying to reproduce the tabwidget example (http://developer.android.com/resources/tutorials/views/hello-tabwidget.html). i'm not really sure what's the problem, i've git no errors while compiling, but i cannot see the application on emulators screen :-/ would be excellent if maybe anyone could have a look at my classes and tell me what's my mistake? I've packed my project here: http://etanto.com/TabTest.zip thanx a lot in advance, folks! michbeck here's the console dump while the run: [2010-06-10 09:18:34 - TabTest] Launching a new emulator with Virtual Device 'Virtual1' [2010-06-10 09:18:35 - TabTest] New emulator found: emulator-5554 [2010-06-10 09:18:35 - TabTest] Waiting for HOME ('android.process.acore') to be launched... [2010-06-10 09:19:05 - TabTest] WARNING: Application does not specify an API level requirement! [2010-06-10 09:19:05 - TabTest] Device API version is 8 (Android 2.2) [2010-06-10 09:19:05 - TabTest] HOME is up on device 'emulator-5554' [2010-06-10 09:19:05 - TabTest] Uploading TabTest.apk onto device 'emulator-5554' [2010-06-10 09:19:05 - TabTest] Installing TabTest.apk... [2010-06-10 09:19:22 - TabTest] Success! [2010-06-10 09:19:22 - TabTest] \TabTest\bin\TabTest.apk installed on device [2010-06-10 09:19:22 - TabTest] Done!

  Read the article

• Not able to run my first program on anroid tablet

  - by misguided

  I am not able to run on my android tablet. I have been following the Android training link It says To run the app from Eclipse: Open one of your project's files and click Run from the toolbar. In the Run as window that appears, select Android Application and click OK. But when I do the same , I do not see anything on my Mototola xoom Tablet. I have checke dthe following link for Setting up USB drivers.As per the link , I have confirmed that device is connected When plugged in over USB, you can verify that your device is connected by executing adb devices from your SDK platform-tools/ directory. If connected, you'll see the device name listed as a "device." C:\Android\sdk\platform-tools>adb devices List of devices attached 0380610842bf5157 device Can anyone please advise where I am going wrong. What should I do to make my eclipse code run on android tablet.

  Read the article

• Select multiple unique lines in MySQL

  - by MartinW

  Hi, I've got a table with the following columns: ID, sysid, x, y, z, timereceived ID is a unique number for each row. sysid is an ID number for a specific device (about 100 different of these) x, y and z is data received from the device. (totally random numbers) timereceived is a timestamp for when the data was received. I need a SQL query to show me the last inserted row for device a, device b, device c and so on. I've been playing around with a lot of different Select statements, but never got anything that works. I manage to get unique rows by using group by, but the rest of the information is random (or at least it feels very random). Anyone able to help me? There could be hundreds of thousands records in this table.

  Read the article

• Xorg does not see my monitor EDID

  - by sean farley

  Below is the output from my Xorg.0. X.Org X Server 1.11.3 Release Date: 2011-12-16 [ 22.311] X Protocol Version 11, Revision 0 [ 22.311] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu [ 22.311] Current Operating System: Linux sean-P55-USB3 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:48:16 UTC 2012 x86_64 [ 22.311] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-34-generic root=UUID=0a34603e-aee9-44d1-8982-a5a5a38c3e4d ro quiet splash [ 22.311] Build Date: 29 August 2012 12:12:33AM [ 22.311] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support) [ 22.311] Current version of pixman: 0.24.4 [ 22.311] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 22.311] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 22.311] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 17 13:20:45 2012 [ 22.311] (==) Using config file: "/etc/X11/xorg.conf" [ 22.311] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 22.311] (==) No Layout section. Using the first Screen section. [ 22.311] (==) No screen section available. Using defaults. [ 22.311] (**) |-->Screen "Default Screen Section" (0) [ 22.311] (**) | |-->Monitor "<default monitor>" [ 22.311] (==) No device specified for screen "Default Screen Section". Using the first device section listed. [ 22.311] (**) | |-->Device "Default Device" [ 22.311] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 22.311] (==) Automatically adding devices I have searched all over, and followed lots of dead ends and unanswered questions on this issue. I need to get this monitor recognised so I can use the native resolution of 1600x1200. The Nvidia driver in Windows has no problem with this. The monitor is an old Iiyama HM204DT A. Is there a way of configuring Xorg manually to get these working? I have tried xrandr but this will not work. Output:- sean@sean-P55-USB3:~$ xrandr Screen 0: minimum 8 x 8, current 1152 x 864, maximum 16384 x 16384 DVI-I-0 connected 1152x864+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0 + 1360x768 60.0 59.8 1152x864 60.0* 800x600 72.2 60.3 56.2 680x384 119.9 119.6 640x480 59.9 512x384 120.0 400x300 144.4 320x240 120.1 DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 disconnected (normal left inverted right x axis y axis) HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 disconnected (normal left inverted right x axis y axis) Tried Nvidia Xorg.config: sean@sean-P55-USB3:~$ sudo nvidia-xconfig [sudo] password for sean: Using X configuration file: "/etc/X11/xorg.conf". VALIDATION ERROR: Data incomplete in file /etc/X11/xorg.conf. Device section "Default Device" must have a Driver line. Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.nvidia-xconfig-original' Backed up file '/etc/X11/xorg.conf' as '/etc/X11/xorg.conf.backup' New X configuration file written to '/etc/X11/xorg.conf' How do I insert a driver line? This is a bit of a pain as I want to use my Vectorworks cad program in a WinXP Vbox at 1600x1200 but all virtual drives are restricted to the host screen resolution. Do i need to manually create EIDI info in Xorg? I am slightly confused about how Xorg and Nvidia relate Please help

  Read the article

• EnOcean -> USB Serial Communication (C++)

  - by regorianer

  I guess it is not the right place to ask here for enocean specific details, but maybe I am doing something wrong by using serial connections and you can help me no matter if there is knowledge about this technology or not. I have a problem to communicate with the RCM152 Module. I have written a C++ program to communicate with the RCM152 by emulating packets of the PTM 200. I teach the RCM152 to listen to the following packets: [06/19/12 04:21:44.546] INFO: SENDING BYTE : 55 <-- start byte [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 <-- head begin [06/19/12 04:21:44.546] INFO: SENDING BYTE : 07 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 07 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 01 <-- head end [06/19/12 04:21:44.546] INFO: SENDING BYTE : 7a <-- CRC Check [06/19/12 04:21:44.546] INFO: SENDING BYTE : f6 <-- packet type [06/19/12 04:21:44.546] INFO: SENDING BYTE : 20 <-- My action (00 and 10 -> OFF, 20 and 30 -> ON) [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 <-- serial.byte 3 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 24 <-- serial.byte 2 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 21 <-- serial.byte 1 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 87 <-- serial.byte 0 [06/19/12 04:21:44.546] INFO: SENDING BYTE : 30 <-- status [06/19/12 04:21:44.546] INFO: SENDING BYTE : 03 <-- 03 for send, 01 for receiver [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- begin destination [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- end destination [06/19/12 04:21:44.546] INFO: SENDING BYTE : ff <-- Transmission quality (sender ff) [06/19/12 04:21:44.546] INFO: SENDING BYTE : 00 [06/19/12 04:21:44.547] INFO: SENDING BYTE : 10 <-- CRC Check A PTM200 Device or a SG-FUS-24-230 Device are sending equivalent packets like: [06/19/12 04:30:31.106] INFO: Received Byte: 55 [06/19/12 04:30:31.106] INFO: Received Byte: 00 [06/19/12 04:30:31.106] INFO: Received Byte: 07 [06/19/12 04:30:31.106] INFO: Received Byte: 07 [06/19/12 04:30:31.106] INFO: Received Byte: 01 [06/19/12 04:30:31.106] INFO: Received Byte: 7a [06/19/12 04:30:31.106] INFO: Received Byte: f6 [06/19/12 04:30:31.106] INFO: Received Byte: 40 [06/19/12 04:30:31.106] INFO: Received Byte: 00 [06/19/12 04:30:31.106] INFO: Received Byte: 24 [06/19/12 04:30:31.106] INFO: Received Byte: 6c [06/19/12 04:30:31.106] INFO: Received Byte: 2f [06/19/12 04:30:31.106] INFO: Received Byte: 30 [06/19/12 04:30:31.106] INFO: Received Byte: 01 [06/19/12 04:30:31.106] INFO: Received Byte: ff [06/19/12 04:30:31.106] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: ff [06/19/12 04:30:31.108] INFO: Received Byte: 37 [06/19/12 04:30:31.108] INFO: Received Byte: 00 [06/19/12 04:30:31.108] INFO: Received Byte: d1 I can control the device connected to the RCM152 like I want to with my sending packets (thats a good fact and means that the RCM152 has learned my packets and can use them. Also the actions (0x10 - ON, 0x30 - OFF) are working fine), but the problem is, that no matter which serial I choose, the RCM152 reacts to these packets. I only want to have actions if the teached-in serial is send and all other packets with different serials to be ignored. The RCM152 is not reacting to the packets sent by the PTM200 nor by the SG-FUS-24-230 because these are not teached-in. Thats exactly what I want to have with the packets created myself. What am I doing wrong? The libraries I am using are these for C++ http://pvbrowser.de/pvbrowser/sf/manual/rllib/html/ The enocean EEP says: For this purpose of a determined relationship between transmitter and receiver each transmitting device has a unique Sender-ID which is part of each radio telegram. The receiving device detects from the Sender-ID whether the device is known, i.e., was already learned, or unknown. A telegram with unknown Sender-ID is disregarded.

  Read the article

• Why I&rsquo;m Getting an iPad

  - by andrewbrust

  I have never purchased an Apple product in my life.  That’s a “true fact.”  And, for that matter, the last Apple product I really wanted was an Apple IIe, back in the 1980s.  I couldn’t afford it though (I was in high school), so I got a Commodore 64 instead…it had the same microprocessor, after all.  If the iPhone were on Verizon, I probably would have picked one up in December, when I got my Droid.  And if the iPod Touch worked with my Napster subscription (which of course it does not, but my Sonos does) I might have picked on of those instead. That’s three strikes, but Apple’s not out.  I’ve decided I want the iPad.  Why?  Well, to start with, my birthday is March 31st…the iPad comes out on April 3rd, and my wife wanted to know what to get me.  Also, my house is a 7-minute walk from the Apple Store on West 14th Street in Manhattan.  This makes it easy to get my pre-ordered device on launch day, and get home quickly with it.  Oh, and I agreed to write an article for Redmond Magazine, the fee for which will pay for the device…that way the birthday present doesn’t have to be an extravagant expense.  Plus, I’m a contrarian, so I want to buy the one device from Apple that the fanboys have actually panned. Think those are bad reasons? How about this: I want to experience iPhone and iPad development and, although my app will probably never hit the App Store and run on the actual device, I still think owning one will help me develop something better.  i want to see if the slate form factor has good business usage scenarios.  I want to see if Business Intelligence technology on a device like this can work.  Imagine a dashboard on this thing. And, for the consumer experience, I really want a touch device on which I can surf the Web while I’m in the kitchen, or on the couch.  I don’t want the small form factor of my phone, I don’t want to use my TV, and I don’t want a keyboard that will get dirty or in my way. I don’t want to watch movies on it (my TV is good for that), so I don’t care that the iPad has a 4:3 screen.  I don’t want to read books on it, so I don’t care that the display is backlit LCD, rather than eInk. But really what I want is to understand, first hand, why people have such brand loyalty to Apple.  I know the big reasons; I’m not detached from society.  But I want to know the subtle points of what Apple does really well, and also what they do poorly.  And I’d like to know, once and for all, if Microsoft can beat Apple, if Microsoft can think the right way to beat Apple and if Microsoft should  even try to beat Apple. I expect to share my thoughts on these questions, as they develop.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >