Search Results

Search found 2677 results on 108 pages for 'eren trigger'.

Page 83/108 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • What could cause a dual-monitor PC to suddenly stop using one of the screens?

    - by raldi
    I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

    Read the article

  • Possible Hack with FTP - What are the solutions?

    - by iamrohitbanga
    I was reading the FTP rfc and hence had this idea. Suppose there are several public ftp servers that allow anonymous user login. I open a control connection on port 21 to each of these servers. Now suppose there is a web server a.com with ip address x.y.z.w listening on port 80. FTP allows a user to specify the host on which the data connection is to be setup. So a user specifies the host and port number of a.com web server. Now the ftp server starts sending data to a.com for which it is not a valid HTTP request and hence it is rejected. But a.com notes that the invalid http request came from a public ftp server and not my ip address. Can this not lead to a distributed attack by utilizing all public ftp servers. worse still the the data being sent by ftp server could be a valid http request which could trigger a.com to send a file back to the ftp server. Is there a solution for this or is it no problem at all.

    Read the article

  • Create a wifi hotspot in a place where an authentication is required [closed]

    - by SoftTimur
    I live in a residence where Internet is provided via cable. Once the computer is connected to the cable, launching a browser will trigger an authentication, I have a username and password to enter, then the internet will be connected. With a gateway (e.g. Wireless Cable Voice Gateway Model CBVG834G) and 2 cables, two PCs can connect to the Internet with my account at the same time. Now the question is, I don't like the cable, and would like to create a wifi hotspot. It seems realizable with the same gateway. According to the instruction on page 2-4 of the manual: Enter http://192.168.0.1 in the address field of your Internet browser. Log in to the gateway with either of the default user names, MSO or admin... However, trying to open 192.168.0.1 gives me an error on the browser. Does anyone know what happened? Is it due to the authentication required by my residence? Is there any other way to build a hotspot of wifi? PS: My system is MAC OS

    Read the article

  • Bindable richTextBox still hanging in memory {WPF, Caliburn.Micro}

    - by Paul
    Hi, I use in WFP Caliburn.Micro Framework. I need bindable richTextbox for Document property. I found many ways how do it bindable richTextBox. But I have one problem. From parent window I open child window. Child window consist bindable richTextBox user control. After I close child window and use memory profiler view class with bindabelrichTextBox control and view model class is still hanging in memory. - this cause memory leaks. If I use richTextBox from .NET Framework or richTextBox from Extended WPF Toolkit it doesn’t cause this memory leak problem. I can’t identified problem in bindable richTextBox class. Here is ist class for bindable richTextBox: Base class can be from .NET or Extended toolkit. /// <summary> /// Represents a bindable rich editing control which operates on System.Windows.Documents.FlowDocument /// objects. /// </summary> public class BindableRichTextBox : RichTextBox { /// <summary> /// Identifies the <see cref="Document"/> dependency property. /// </summary> public static readonly DependencyProperty DocumentProperty = DependencyProperty.Register("Document", typeof(FlowDocument), typeof(BindableRichTextBox)); /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> public BindableRichTextBox() : base() { } /// <summary> /// Initializes a new instance of the <see cref="BindableRichTextBox"/> class. /// </summary> /// <param title="document">A <see cref="T:System.Windows.Documents.FlowDocument"></see> to be added as the initial contents of the new <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.</param> public BindableRichTextBox(FlowDocument document) : base(document) { } /// <summary> /// Raises the <see cref="E:System.Windows.FrameworkElement.Initialized"></see> event. This method is invoked whenever <see cref="P:System.Windows.FrameworkElement.IsInitialized"></see> is set to true internally. /// </summary> /// <param title="e">The <see cref="T:System.Windows.RoutedEventArgs"></see> that contains the event data.</param> protected override void OnInitialized(EventArgs e) { // Hook up to get notified when DocumentProperty changes. DependencyPropertyDescriptor descriptor = DependencyPropertyDescriptor.FromProperty(DocumentProperty, typeof(BindableRichTextBox)); descriptor.AddValueChanged(this, delegate { // If the underlying value of the dependency property changes, // update the underlying document, also. base.Document = (FlowDocument)GetValue(DocumentProperty); }); // By default, we support updates to the source when focus is lost (or, if the LostFocus // trigger is specified explicity. We don't support the PropertyChanged trigger right now. this.LostFocus += new RoutedEventHandler(BindableRichTextBox_LostFocus); base.OnInitialized(e); } /// <summary> /// Handles the LostFocus event of the BindableRichTextBox control. /// </summary> /// <param title="sender">The source of the event.</param> /// <param title="e">The <see cref="System.Windows.RoutedEventArgs"/> instance containing the event data.</param> void BindableRichTextBox_LostFocus(object sender, RoutedEventArgs e) { // If we have a binding that is set for LostFocus or Default (which we are specifying as default) // then update the source. Binding binding = BindingOperations.GetBinding(this, DocumentProperty); if (binding.UpdateSourceTrigger == UpdateSourceTrigger.Default || binding.UpdateSourceTrigger == UpdateSourceTrigger.LostFocus) { BindingOperations.GetBindingExpression(this, DocumentProperty).UpdateSource(); } } /// <summary> /// Gets or sets the <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>. /// </summary> /// <value></value> /// <returns>A <see cref="T:System.Windows.Documents.FlowDocument"></see> object that represents the contents of the <see cref="T:System.Windows.Controls.BindableRichTextBox"></see>.By default, this property is set to an empty <see cref="T:System.Windows.Documents.FlowDocument"></see>. Specifically, the empty <see cref="T:System.Windows.Documents.FlowDocument"></see> contains a single <see cref="T:System.Windows.Documents.Paragraph"></see>, which contains a single <see cref="T:System.Windows.Documents.Run"></see> which contains no text.</returns> /// <exception cref="T:System.ArgumentException">Raised if an attempt is made to set this property to a <see cref="T:System.Windows.Documents.FlowDocument"></see> that represents the contents of another <see cref="T:System.Windows.Controls.RichTextBox"></see>.</exception> /// <exception cref="T:System.ArgumentNullException">Raised if an attempt is made to set this property to null.</exception> /// <exception cref="T:System.InvalidOperationException">Raised if this property is set while a change block has been activated.</exception> public new FlowDocument Document { get { return (FlowDocument)GetValue(DocumentProperty); } set { SetValue(DocumentProperty, value); } } } Thank fro help and advice. Qucik example: Child window with .NET richTextBox <Window x:Class="WpfApplication2.Window1" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Window1" Height="300" Width="300"> <Grid> <RichTextBox Background="Green" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0"/> </Grid> </Window> This window I open from parent window: var w = new Window1(); w.Show(); Then close this window, check with memory profiler and it memory doesn’t exist any object of window1 - richTextBox. It’s Ok. But then I try bindable richTextBox: Child window 2: <Window x:Class="WpfApplication2.Window2" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:Controls="clr-namespace:WpfApplication2.Controls" Title="Window2" Height="300" Width="300"> <Grid> <Controls:BindableRichTextBox Background="Red" VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Auto" FontSize="13" Margin="4,4,4,4" Grid.Row="0" /> </Grid> </Window> Open child window 2, close this child window and in memory are still alive object of this child window also bindable richTextBox object.

    Read the article

  • what does calling ´this´ outside of a jquery plugin refer to

    - by Richard
    Hi, I am using the liveTwitter plugin The problem is that I need to stop the plugin from hitting the Twitter api. According to the documentation I need to do this $("#tab1 .container_twitter_status").each(function(){ this.twitter.stop(); }); Already, the each does not make sense on an id and what does this refer to? Anyway, I get an undefined error. I will paste the plugin code and hope it makes sense to somebody MY only problem thusfar with this plugin is that I need to be able to stop it. thanks in advance, Richard /* * jQuery LiveTwitter 1.5.0 * - Live updating Twitter plugin for jQuery * * Copyright (c) 2009-2010 Inge Jørgensen (elektronaut.no) * Licensed under the MIT license (MIT-LICENSE.txt) * * $Date: 2010/05/30$ */ /* * Usage example: * $("#twitterSearch").liveTwitter('bacon', {limit: 10, rate: 15000}); */ (function($){ if(!$.fn.reverse){ $.fn.reverse = function() { return this.pushStack(this.get().reverse(), arguments); }; } $.fn.liveTwitter = function(query, options, callback){ var domNode = this; $(this).each(function(){ var settings = {}; // Handle changing of options if(this.twitter) { settings = jQuery.extend(this.twitter.settings, options); this.twitter.settings = settings; if(query) { this.twitter.query = query; } this.twitter.limit = settings.limit; this.twitter.mode = settings.mode; if(this.twitter.interval){ this.twitter.refresh(); } if(callback){ this.twitter.callback = callback; } // ..or create a new twitter object } else { // Extend settings with the defaults settings = jQuery.extend({ mode: 'search', // Mode, valid options are: 'search', 'user_timeline' rate: 15000, // Refresh rate in ms limit: 10, // Limit number of results refresh: true }, options); // Default setting for showAuthor if not provided if(typeof settings.showAuthor == "undefined"){ settings.showAuthor = (settings.mode == 'user_timeline') ? false : true; } // Set up a dummy function for the Twitter API callback if(!window.twitter_callback){ window.twitter_callback = function(){return true;}; } this.twitter = { settings: settings, query: query, limit: settings.limit, mode: settings.mode, interval: false, container: this, lastTimeStamp: 0, callback: callback, // Convert the time stamp to a more human readable format relativeTime: function(timeString){ var parsedDate = Date.parse(timeString); var delta = (Date.parse(Date()) - parsedDate) / 1000; var r = ''; if (delta < 60) { r = delta + ' seconds ago'; } else if(delta < 120) { r = 'a minute ago'; } else if(delta < (45*60)) { r = (parseInt(delta / 60, 10)).toString() + ' minutes ago'; } else if(delta < (90*60)) { r = 'an hour ago'; } else if(delta < (24*60*60)) { r = '' + (parseInt(delta / 3600, 10)).toString() + ' hours ago'; } else if(delta < (48*60*60)) { r = 'a day ago'; } else { r = (parseInt(delta / 86400, 10)).toString() + ' days ago'; } return r; }, // Update the timestamps in realtime refreshTime: function() { var twitter = this; $(twitter.container).find('span.time').each(function(){ $(this).html(twitter.relativeTime(this.timeStamp)); }); }, // Handle reloading refresh: function(initialize){ var twitter = this; if(this.settings.refresh || initialize) { var url = ''; var params = {}; if(twitter.mode == 'search'){ params.q = this.query; if(this.settings.geocode){ params.geocode = this.settings.geocode; } if(this.settings.lang){ params.lang = this.settings.lang; } if(this.settings.rpp){ params.rpp = this.settings.rpp; } else { params.rpp = this.settings.limit; } // Convert params to string var paramsString = []; for(var param in params){ if(params.hasOwnProperty(param)){ paramsString[paramsString.length] = param + '=' + encodeURIComponent(params[param]); } } paramsString = paramsString.join("&"); url = "http://search.twitter.com/search.json?"+paramsString+"&callback=?"; } else if(twitter.mode == 'user_timeline') { url = "http://api.twitter.com/1/statuses/user_timeline/"+encodeURIComponent(this.query)+".json?count="+twitter.limit+"&callback=?"; } else if(twitter.mode == 'list') { var username = encodeURIComponent(this.query.user); var listname = encodeURIComponent(this.query.list); url = "http://api.twitter.com/1/"+username+"/lists/"+listname+"/statuses.json?per_page="+twitter.limit+"&callback=?"; } $.getJSON(url, function(json) { var results = null; if(twitter.mode == 'search'){ results = json.results; } else { results = json; } var newTweets = 0; $(results).reverse().each(function(){ var screen_name = ''; var profile_image_url = ''; if(twitter.mode == 'search') { screen_name = this.from_user; profile_image_url = this.profile_image_url; created_at_date = this.created_at; } else { screen_name = this.user.screen_name; profile_image_url = this.user.profile_image_url; // Fix for IE created_at_date = this.created_at.replace(/^(\w+)\s(\w+)\s(\d+)(.*)(\s\d+)$/, "$1, $3 $2$5$4"); } var userInfo = this.user; var linkified_text = this.text.replace(/[A-Za-z]+:\/\/[A-Za-z0-9-_]+\.[A-Za-z0-9-_:%&\?\/.=]+/, function(m) { return m.link(m); }); linkified_text = linkified_text.replace(/@[A-Za-z0-9_]+/g, function(u){return u.link('http://twitter.com/'+u.replace(/^@/,''));}); linkified_text = linkified_text.replace(/#[A-Za-z0-9_\-]+/g, function(u){return u.link('http://search.twitter.com/search?q='+u.replace(/^#/,'%23'));}); if(!twitter.settings.filter || twitter.settings.filter(this)) { if(Date.parse(created_at_date) > twitter.lastTimeStamp) { newTweets += 1; var tweetHTML = '<div class="tweet tweet-'+this.id+'">'; if(twitter.settings.showAuthor) { tweetHTML += '<img width="24" height="24" src="'+profile_image_url+'" />' + '<p class="text"><span class="username"><a href="http://twitter.com/'+screen_name+'">'+screen_name+'</a>:</span> '; } else { tweetHTML += '<p class="text"> '; } tweetHTML += linkified_text + ' <span class="time">'+twitter.relativeTime(created_at_date)+'</span>' + '</p>' + '</div>'; $(twitter.container).prepend(tweetHTML); var timeStamp = created_at_date; $(twitter.container).find('span.time:first').each(function(){ this.timeStamp = timeStamp; }); if(!initialize) { $(twitter.container).find('.tweet-'+this.id).hide().fadeIn(); } twitter.lastTimeStamp = Date.parse(created_at_date); } } }); if(newTweets > 0) { // Limit number of entries $(twitter.container).find('div.tweet:gt('+(twitter.limit-1)+')').remove(); // Run callback if(twitter.callback){ twitter.callback(domNode, newTweets); } // Trigger event $(domNode).trigger('tweets'); } }); } }, start: function(){ var twitter = this; if(!this.interval){ this.interval = setInterval(function(){twitter.refresh();}, twitter.settings.rate); this.refresh(true); } }, stop: function(){ if(this.interval){ clearInterval(this.interval); this.interval = false; } } }; var twitter = this.twitter; this.timeInterval = setInterval(function(){twitter.refreshTime();}, 5000); this.twitter.start(); } }); return this; }; })(jQuery);

    Read the article

  • Using jQuery validation plugin with tabbed navigation

    - by user3438917
    I have a tabbed navigation wizard, for which the first section needs to be validated before proceeding to the next tab. The validation should trigger when the user hits the "next" button. I am unable to get the validation to trigger though: <form id="target-group" novalidate="novalidate"> <div class="box"> <div class='box-header-main'><h2><img src="assets/img/list.png" /> Target Group Information</h2></div> <br /> <div class='box'> <div class='box-header-property'><h2><span data-bind="text:Name">New Target Group</span> | <i class='fa fa-file'></i></h2></div> <br /> <div class='row'> <div id='flight-wizard'> <div id='content' class='col-lg-12'> <div class='col-lg-12'> <div id='tabs'> <ul> <li id="targetgroup-info-tab"><a href='#tabs-1'><i class="fa fa-info-circle"></i>Target Group Info</a></li> <li id="zone-tab"><a href='#tabs-2'><i class="fa fa-map-marker"></i>Zones</a></li> </ul> <div id='tabs-1'> <div class='row'> <div class='col-xs-6'> <div class='form-group'> Name<sup>*</sup> <input id="selectError0" name="name" class='form-control col-xs-12' data-bind="value: asdf" placeholder='Enter Name ...' /> </div> <form class='form-horizontal'> <div class='form-group'> Product(s)<sup>*</sup> <div class='controls' id='products'> <select id='selectError3' class='form-control' data-bind="options:test, optionsText: 'Name', optionsValue : 'test', value: test, optionsCaption: 'Choose Product...'"></select> </div> </div> </form> </div> <!--RIGHT PANE--> <div class='col-xs-6'> <div class='form-group'> Platform<sup>*</sup> <div class='controls'> <select id="selectError2" class='form-control' data-bind="options:test, optionsText: 'Name', optionsValue: 'test', value : test, optionsCaption: 'Choose Platform...'"></select> </div> </div> <form class='form-horizontal'> <div class='form-group'> AdTypes(s)<sup>*</sup> <div class='controls' id='adtypes'> <select multiple="" id='adtypesselect' class='form-control' data-rel="chosen" data-bind="options:test, optionsText: 'Name', optionsValue : 'test', selectedOptions: test, optionsCaption: 'test...'"></select> </div> </div> </form> <button id="btn_cancel_large" class='btn btn-large btn-primary btn-round'><i class='fa fa-ban' /></i> Cancel</button> <button id="btn-next-large" class='btn btn-large btn-primary btn-round'>Next <i class='fa fa-arrow-circle-right'></i></button> </div> <!--end of right pane--> </div> </div> <div id='tabs-2'> <div class='row'> <div class='col-lg-12'> <div class='row'> <div class='col-lg-12'> <div id='zones_list' class='box-content'> <div id='add-new-targetgroupzone' class='add-new'><i class='fa fa-plus-circle'></i><a href='/#/inventory/targeting/' onclick="return false;">Add Zone</a></div> <table id="results" width="100%"> <thead> <tr> <th>Publisher</th> <th>Property</th> <th>Zone</th> <th>AdTypes</th> <th width='10%'>Quick&nbsp;Actions</th> </tr> </thead> </table> </div> </div> </div> </div> </div> <br /> <div class="btn_row"> <button id="btn_cancel_large2" class='btn btn-large btn-primary btn-round'><i class='fa fa-ban' /></i> Cancel</button> <button id="btn-submit-large" class='btn btn-large btn-primary btn-round'>Submit <i class='fa fa-arrow-circle-down'></i></button> </div> </div> </div> </div> </div> </div> </div> </div> </div> </form> <form id="zones-form" style="display: none;" novalidate="novalidate" class="slideup-form"> <div class="box"> <div class="box-header-panel"> <h2>Add Target Group Zone</h2> <div class="box-icon" id="zones-form-close"> <i class="fa fa-arrow-circle-down"></i> </div> </div> <div class="box-content clearfix"> <div class="box-content"> <table id="zones-list" width="100%"> <thead> <tr> <th>Publisher</th> <th>Property</th> <th>Zone</th> <th>AdTypes</th> <th width='10%'>Quick&nbsp;Actions</th> </tr> </thead> </table> </div> </div> </div> </div> </form> jQuery: $("#target-group").validate({ rules: { name: { required: true } }, messages: { name: "Name required", } }); $('#btn-next-large').click(function () { if ($('#target-group').valid()) $tabs.tabs('select', $(this).attr("rel")); });

    Read the article

  • Azure Diagnostics wrt Custom Logs and honoring scheduledTransferPeriod

    - by kjsteuer
    I have implemented my own TraceListener similar to http://blogs.technet.com/b/meamcs/archive/2013/05/23/diagnostics-of-cloud-services-custom-trace-listener.aspx . One thing I noticed is that that logs show up immediately in My Azure Table Storage. I wonder if this is expected with Custom Trace Listeners or because I am in a development environment. My diagnosics.wadcfg <?xml version="1.0" encoding="utf-8"?> <DiagnosticMonitorConfiguration configurationChangePollInterval="PT1M""overallQuotaInMB="4096" xmlns="http://schemas.microsoft.com/ServiceHosting/2010/10/DiagnosticsConfiguration"> <DiagnosticInfrastructureLogs scheduledTransferLogLevelFilter="Information" /> <Directories scheduledTransferPeriod="PT1M"> <IISLogs container="wad-iis-logfiles" /> <CrashDumps container="wad-crash-dumps" /> </Directories> <Logs bufferQuotaInMB="0" scheduledTransferPeriod="PT30M" scheduledTransferLogLevelFilter="Information" /> </DiagnosticMonitorConfiguration> I have changed my approach a bit. Now I am defining in the web config of my webrole. I notice when I set autoflush to true in the webconfig, every thing works but scheduledTransferPeriod is not honored because the flush method pushes to the table storage. I would like to have scheduleTransferPeriod trigger the flush or trigger flush after a certain number of log entries like the buffer is full. Then I can also flush on server shutdown. Is there any method or event on the CustomTraceListener where I can listen to the scheduleTransferPeriod? <system.diagnostics> <!--http://msdn.microsoft.com/en-us/library/sk36c28t(v=vs.110).aspx By default autoflush is false. By default useGlobalLock is true. While we try to be threadsafe, we keep this default for now. Later if we would like to increase performance we can remove this. see http://msdn.microsoft.com/en-us/library/system.diagnostics.trace.usegloballock(v=vs.110).aspx --> <trace> <listeners> <add name="TableTraceListener" type="Pos.Services.Implementation.TableTraceListener, Pos.Services.Implementation" /> <remove name="Default" /> </listeners> </trace> </system.diagnostics> I have modified the custom trace listener to the following: namespace Pos.Services.Implementation { class TableTraceListener : TraceListener { #region Fields //connection string for azure storage readonly string _connectionString; //Custom sql storage table for logs. //TODO put in config readonly string _diagnosticsTable; [ThreadStatic] static StringBuilder _messageBuffer; readonly object _initializationSection = new object(); bool _isInitialized; CloudTableClient _tableStorage; readonly object _traceLogAccess = new object(); readonly List<LogEntry> _traceLog = new List<LogEntry>(); #endregion #region Constructors public TableTraceListener() : base("TableTraceListener") { _connectionString = RoleEnvironment.GetConfigurationSettingValue("DiagConnection"); _diagnosticsTable = RoleEnvironment.GetConfigurationSettingValue("DiagTableName"); } #endregion #region Methods /// <summary> /// Flushes the entries to the storage table /// </summary> public override void Flush() { if (!_isInitialized) { lock (_initializationSection) { if (!_isInitialized) { Initialize(); } } } var context = _tableStorage.GetTableServiceContext(); context.MergeOption = MergeOption.AppendOnly; lock (_traceLogAccess) { _traceLog.ForEach(entry => context.AddObject(_diagnosticsTable, entry)); _traceLog.Clear(); } if (context.Entities.Count > 0) { context.BeginSaveChangesWithRetries(SaveChangesOptions.None, (ar) => context.EndSaveChangesWithRetries(ar), null); } } /// <summary> /// Creates the storage table object. This class does not need to be locked because the caller is locked. /// </summary> private void Initialize() { var account = CloudStorageAccount.Parse(_connectionString); _tableStorage = account.CreateCloudTableClient(); _tableStorage.GetTableReference(_diagnosticsTable).CreateIfNotExists(); _isInitialized = true; } public override bool IsThreadSafe { get { return true; } } #region Trace and Write Methods /// <summary> /// Writes the message to a string buffer /// </summary> /// <param name="message">the Message</param> public override void Write(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.Append(message); } /// <summary> /// Writes the message with a line breaker to a string buffer /// </summary> /// <param name="message"></param> public override void WriteLine(string message) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); _messageBuffer.AppendLine(message); } /// <summary> /// Appends the trace information and message /// </summary> /// <param name="eventCache">the Event Cache</param> /// <param name="source">the Source</param> /// <param name="eventType">the Event Type</param> /// <param name="id">the Id</param> /// <param name="message">the Message</param> public override void TraceEvent(TraceEventCache eventCache, string source, TraceEventType eventType, int id, string message) { base.TraceEvent(eventCache, source, eventType, id, message); AppendEntry(id, eventType, eventCache); } /// <summary> /// Adds the trace information to a collection of LogEntry objects /// </summary> /// <param name="id">the Id</param> /// <param name="eventType">the Event Type</param> /// <param name="eventCache">the EventCache</param> private void AppendEntry(int id, TraceEventType eventType, TraceEventCache eventCache) { if (_messageBuffer == null) _messageBuffer = new StringBuilder(); var message = _messageBuffer.ToString(); _messageBuffer.Length = 0; if (message.EndsWith(Environment.NewLine)) message = message.Substring(0, message.Length - Environment.NewLine.Length); if (message.Length == 0) return; var entry = new LogEntry() { PartitionKey = string.Format("{0:D10}", eventCache.Timestamp >> 30), RowKey = string.Format("{0:D19}", eventCache.Timestamp), EventTickCount = eventCache.Timestamp, Level = (int)eventType, EventId = id, Pid = eventCache.ProcessId, Tid = eventCache.ThreadId, Message = message }; lock (_traceLogAccess) _traceLog.Add(entry); } #endregion #endregion } }

    Read the article

  • How to autostart this slide

    - by lchales
    Hello there: first of all i have no idea on coding or anything related, simple question: is there any simple way to tell this code to autostart the slide? at the current moment the images change on click. currently the index page only have one image, what i want is to add a few but without the need to click to see the next one here is the code from my index: <script type="text/javascript"> //<![CDATA[ /* the images preload plugin */ (function($) { $.fn.preload = function(options) { var opts = $.extend({}, $.fn.preload.defaults, options), o = $.meta ? $.extend({}, opts, this.data()) : opts; var c = this.length, l = 0; return this.each(function() { var $i = $(this); $('<img/>').load(function(i){ ++l; if(l == c) o.onComplete(); }).attr('src',$i.attr('src')); }); }; $.fn.preload.defaults = { onComplete : function(){return false;} }; })(jQuery); //]]> </script><script type="text/javascript"> //<![CDATA[ $(function() { var $tf_bg = $('#tf_bg'), $tf_bg_images = $tf_bg.find('img'), $tf_bg_img = $tf_bg_images.eq(0), $tf_thumbs = $('#tf_thumbs'), total = $tf_bg_images.length, current = 0, $tf_content_wrapper = $('#tf_content_wrapper'), $tf_next = $('#tf_next'), $tf_prev = $('#tf_prev'), $tf_loading = $('#tf_loading'); //preload the images $tf_bg_images.preload({ onComplete : function(){ $tf_loading.hide(); init(); } }); //shows the first image and initializes events function init(){ //get dimentions for the image, based on the windows size var dim = getImageDim($tf_bg_img); //set the returned values and show the image $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }).fadeIn(); //resizing the window resizes the $tf_bg_img $(window).bind('resize',function(){ var dim = getImageDim($tf_bg_img); $tf_bg_img.css({ width : dim.width, height : dim.height, left : dim.left, top : dim.top }); }); //expand and fit the image to the screen $('#tf_zoom').live('click', function(){ if($tf_bg_img.is(':animated')) return false; var $this = $(this); if($this.hasClass('tf_zoom')){ resize($tf_bg_img); $this.addClass('tf_fullscreen') .removeClass('tf_zoom'); } else{ var dim = getImageDim($tf_bg_img); $tf_bg_img.animate({ width : dim.width, height : dim.height, top : dim.top, left : dim.left },350); $this.addClass('tf_zoom') .removeClass('tf_fullscreen'); } } ); //click the arrow down, scrolls down $tf_next.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('tb'); }); //click the arrow up, scrolls up $tf_prev.bind('click',function(){ if($tf_bg_img.is(':animated')) return false; scroll('bt'); }); //mousewheel events - down / up button trigger the scroll down / up $(document).mousewheel(function(e, delta) { if($tf_bg_img.is(':animated')) return false; if(delta > 0) scroll('bt'); else scroll('tb'); return false; }); //key events - down / up button trigger the scroll down / up $(document).keydown(function(e){ if($tf_bg_img.is(':animated')) return false; switch(e.which){ case 38: scroll('bt'); break; case 40: scroll('tb'); break; } }); } //show next / prev image function scroll(dir){ //if dir is "tb" (top -> bottom) increment current, //else if "bt" decrement it current = (dir == 'tb')?current + 1:current - 1; //we want a circular slideshow, //so we need to check the limits of current if(current == total) current = 0; else if(current < 0) current = total - 1; //flip the thumb $tf_thumbs.flip({ direction : dir, speed : 400, onBefore : function(){ //the new thumb is set here var content = '<span id="tf_zoom" class="tf_zoom"><\/span>'; content +='<img src="' + $tf_bg_images.eq(current).attr('longdesc') + '" alt="Thumb' + (current+1) + '"/>'; $tf_thumbs.html(content); } }); //we get the next image var $tf_bg_img_next = $tf_bg_images.eq(current), //its dimentions dim = getImageDim($tf_bg_img_next), //the top should be one that makes the image out of the viewport //the image should be positioned up or down depending on the direction top = (dir == 'tb')?$(window).height() + 'px':-parseFloat(dim.height,10) + 'px'; //set the returned values and show the next image $tf_bg_img_next.css({ width : dim.width, height : dim.height, left : dim.left, top : top }).show(); //now slide it to the viewport $tf_bg_img_next.stop().animate({ top : dim.top },700); //we want the old image to slide in the same direction, out of the viewport var slideTo = (dir == 'tb')?-$tf_bg_img.height() + 'px':$(window).height() + 'px'; $tf_bg_img.stop().animate({ top : slideTo },700,function(){ //hide it $(this).hide(); //the $tf_bg_img is now the shown image $tf_bg_img = $tf_bg_img_next; //show the description for the new image $tf_content_wrapper.children() .eq(current) .show(); }); //hide the current description $tf_content_wrapper.children(':visible') .hide() } //animate the image to fit in the viewport function resize($img){ var w_w = $(window).width(), w_h = $(window).height(), i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h; if(i_w > i_h){ new_w = w_w; new_h = w_w * r_i; if(new_h > w_h){ new_h = w_h; new_w = w_h / r_i; } } else{ new_h = w_w * r_i; new_w = w_w; } $img.animate({ width : new_w + 'px', height : new_h + 'px', top : '0px', left : '0px' },350); } //get dimentions of the image, //in order to make it full size and centered function getImageDim($img){ var w_w = $(window).width(), w_h = $(window).height(), r_w = w_h / w_w, i_w = $img.width(), i_h = $img.height(), r_i = i_h / i_w, new_w,new_h, new_left,new_top; if(r_w > r_i){ new_h = w_h; new_w = w_h / r_i; } else{ new_h = w_w * r_i; new_w = w_w; } return { width : new_w + 'px', height : new_h + 'px', left : (w_w - new_w) / 2 + 'px', top : (w_h - new_h) / 2 + 'px' }; } }); //]]> </script>

    Read the article

  • April 30th Links: ASP.NET, ASP.NET MVC, Visual Studio 2010

    - by ScottGu
    Here is the latest in my link-listing series. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] ASP.NET Data Web Control Enhancements in ASP.NET 4.0: Scott Mitchell has a good article that summarizes some of the nice improvements coming to the ASP.NET 4 data controls. Refreshing an ASP.NET AJAX UpdatePanel with JavaScript: Scott Mitchell has another nice article in his series on using ASP.NET AJAX that demonstrates how to programmatically trigger an UpdatePanel refresh using JavaScript on the client. ASP.NET MVC ASP.NET MVC 2: Basics and Introduction: Scott Hanselman delivers an awesome introductory talk on ASP.NET MVC.  Great for people looking to understand and learn ASP.NET MVC. ASP.NET MVC 2: Ninja Black Belt Tips: Another great talk by Scott Hanselman about how to make the most of several features of ASP.NET MVC 2. ASP.NET MVC 2 Html.Editor/Display Templates: A great blog post detailing the new Html.EditorFor() and Html.DisplayFor() helpers within ASP.NET MVC 2. MVCContrib Grid: Jeremy Skinner’s video presentation about the new Html.Grid() helper component within the (most awesome) MvcContrib project for ASP.NET MVC. Code Snippets for ASP.NET MVC 2 in VS 2010: Raj Kaimal documents some of the new code snippets for ASP.NET MVC 2 that are now built-into Visual Studio 2010.  Read this article to learn how to do common scenarios with fewer keystrokes. Turn on Compile-time View Checking for ASP.NET MVC Projects in TFS 2010 Build: Jim Lamb has a nice post that describes how to enable compile-time view checking as part of automated builds done with a TFS Build Server.  This will ensure any errors in your view templates raise build-errors (allowing you to catch them at build-time instead of runtime). Visual Studio 2010 VS 2010 Keyboard Shortcut Posters for VB, C#, F# and C++: Keyboard shortcut posters that you can download and then printout. Ideal to provide a quick reference on your desk for common keystroke actions inside VS 2010. My Favorite New Features in VS 2010: Scott Mitchell has a nice article that summarizes some of his favorite new features in VS 2010.  Check out my VS 2010 and .NET 4 blog series for more details on some of them. 6 Cool VS 2010 Quick Tips and Features: Anoop has a nice blog post describing 6 cool features of VS 2010 that you can take advantage of. SharePoint Development with VS 2010: Beth Massi links to a bunch of nice “How do I?” videos that that demonstrate how to use the SharePoint development support built-into VS 2010. How to Pin a Project to the Recent Projects List in VS 2010: A useful tip/trick that demonstrates how to “pin” a project to always show up on the “Recent Projects” list within Visual Studio 2010. Using the WPF Tree Visualizer in VS 2010: Zain blogs about the new WPF Tree Visualizer supported by the VS 2010 debugger.  This makes it easier to visualize WPF control hierarchies within the debugger. TFS 2010 Power Tools Released: Brian Harry blogs about the cool new TFS 2010 extensions released with this week’s TFS 2010 Power Tools release. What is New with T4 in VS 2010: T4 is the name of Visual Studio’s template-based code generation technology.  Lots of scenarios within VS 2010 now use T4 for code generation customization. Two examples are ASP.NET MVC Views and EF4 Model Generation.  This post describes some of the many T4 infrastructure improvements in VS 2010. Hope this helps, Scott P.S. If you haven’t already, check out this month’s "Find a Hoster” page on the www.asp.net website to learn about great (and very inexpensive) ASP.NET hosting offers.

    Read the article

  • Raspberry Pi entrance signed backed by Umbraco - Part 1

    - by Chris Houston
    Being experts on all things Umbraco, we jumped at the chance to help our client, QV Offices, with their pressing signage predicament. They needed to display a sign in the entrance to their building and approached us for our advice. Of course it had to be electronic: displaying multiple names of their serviced office clients, meeting room bookings and on-the-pulse promotions. But with a winding Victorian staircase and minimal storage space how could the monitor be run, updated and managed? That’s where we came in…Raspberry PiUmbraco CMSAutomatic updatesAutomated monitor of the signPower saving when the screen is not in useMounting the screenThe screen that has been used is a standard LED low energy Full HD screen and has been mounted on the wall using it's VESA mounting points, as the wall is a stud wall we were able to add an access panel behind the screen to feed through the mains, HDMI and sensor cables.The Raspberry Pi is then tucked away out of sight in the main electrical cupboard which just happens to be next to the sign, we had an electrician add a power point inside this cupboard to allow us to power the screen and the Raspberry Pi.Designing the interface and editing the contentAlthough a room sign was the initial requirement from QV Offices, their medium term goal has always been to add online meeting booking to their website and hence we suggested adding information about the current and next day's meetings to the sign that would be pulled directly from their online booking system.We produced the design and built the web page to fit exactly on a 1920 x 1080 screen (Full HD in Portrait)As you would expect all the information can be edited via an Umbraco CMS, they are able to add floors, rooms, clients and virtual clients as well as add meeting bookings to their meeting diary.How we configured the Raspberry PiAfter receiving a new Raspberry Pi we downloaded the latest release of Raspbian operating system and followed the official guide which shows how to copy the OS onto an SD card from a Mac, we then followed the majority of steps on this useful guide: 10 Things to Do After Buying a Raspberry Pi.Installing ChromiumWe chose to use the Chromium web browser which for those who do not know is the open sourced version of Google Chrome. You can install this from the terminal with the following command:sudo apt-get install chromium-browserInstalling UnclutterWe found this little application which automatically hides the mouse pointer, it is used in the script below and is installed using the following command:sudo apt-get install unclutterAuto start Chromium and disabling the screen saver, power saving and mouseWhen the Raspberry Pi has been installed it will not have a keyboard or mouse and hence if their was a power cut we needed it to always boot and re-loaded Chromium with the correct URL.Our preferred command line text editor is Nano and I have assumed you know how to use this editor or will be able to work it out pretty quickly.So using the following command:sudo nano /etc/xdg/lxsession/LXDE/autostartWe then changed the autostart file content to:@lxpanel --profile LXDE@pcmanfm --desktop --profile LXDE@xscreensaver -no-splash@xset s off@xset -dpms@xset s noblank@chromium --kiosk --incognito http://www.qvoffices.com/someURL@unclutter -idle 0The first few commands turn off the screen saver and power saving, we then open Cromium in Kiosk Mode (full screen with no menu etc) and pass in the URL to use (I have changed the URL in this example) We found a useful blog post with the Cromium command line switches.Finally we also open an application called Unclutter which auto hides the mouse after 0 seconds, so you will never see a mouse on the sign.We also had to edit the following file:sudo nano /etc/lightdm/lightdm.confAnd added the following line under the [SeatDefault] section:xserver-command=X -s 0 dpmsRefreshing the screenWe decided to try and add a scheduled task that would trigger Chromium to reload the page, at some point in the future we might well change this to using Javascript to update the content, but for now this works fine.First we installed the XDOTool which enables you to script Keyboard commands:sudo apt-get install xdotoolWe used the Refreshing Chromium Browser by Shell Script post as a reference and created the following shell script (which we called refreshing.sh):export DISPLAY=":0"WID=$(xdotool search --onlyvisible --class chromium|head -1)xdotool windowactivate ${WID}xdotool key ctrl+F5This selects the correct display and then sends a CTRL + F5 to refresh Chromium.You will need to give this file execute permissions:chmod a=rwx refreshing.shNow we have the script file setup we just need to schedule it to call this script periodically which is done by using Crontab, to edit this you use the following command:crontab -eAnd we added the following:*/5 * * * * DISPLAY=":.0" /home/pi/scripts/refreshing.sh >/home/pi/cronlog.log 2>&1This calls our script every 5 minutes to refresh the display and it logs any errors to the cronlog.log file.SummaryQV Offices now have a richer and more manageable booking system than they did before we started, and a great new sign to boot.How could we make sure that the sign was running smoothly downstairs in a busy office centre? A second post will follow outlining exactly how Vizioz enabled QV Offices to monitor their sign simply and remotely, from the comfort of their desks.

    Read the article

  • JDBC Triggers

    - by Tim Dexter
    Received a question from a customer last week, they were using the new rollup patch on top of 10.1.3.4.1. What are these boxes for? Don't you know? Surely? Well, they are for ... that new functionality, you know it's in the user docs, that thingmabobby doodah. OK, I dont know either, I can have a guess but let me check first. Serveral IM sessions, emails and a dig through the readme for the new patch and I had my answer. Its not in the official documentation, yet. Leslie is on the case. The two fields were designed to allow an Admin to set a users context attributes before a connection is made to a database and for un-setting the attributes after the connection is broken by the extraction engine. We got a sample from the Enterprise Manager team on how they will be using it with their VPD connections. FUNCTION bip_to_em_user (user_name_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETEMUSERCONTEXT(user_name_in, MGMT_USER.OP_SET_IDENTIFIER); return TRUE; END bip_to_em_user; And used in the jdbc data source definition like this (pre-process function): sysman.mgmt_bip.bip_to_em_user(:xdo_user_name) You, of course can call any function that is going to return a boolean value, another example might be. FUNCTION set_per_process_username (username_in IN VARCHAR2) RETURN BOOLEAN IS BEGIN SETUSERCONTEXT(username_in); return TRUE; END set_per_process_username Just use your own function/package to set some user context. Very grateful for the mail from Leslie on the EM team's usage but I had to try it out. Rather than set up a VPD, I opted for a simpler test. Can I log the comings and goings of users and their queries using the same pre-process text box. Reaching back into the depths of my developer brain to remember some pl/sql, it was not that deep and I came up with: CREATE OR REPLACE FUNCTION BIPTEST (user_name_in IN VARCHAR2, smode IN VARCHAR2) RETURN BOOLEAN AS BEGIN INSERT INTO LOGTAB VALUES(user_name_in, sysdate,smode); RETURN true; END BIPTEST; To call it in the pre-fetch trigger. BIPTEST(:xdo_user_name) Not going to set the pl/sql world alight I know, but you get the idea. As a new connection is made to the database its logged in the LOGTAB table. The SMODE value just sets if its an entry or an exit. I used the pre- and post- boxes. NAME UPDATE_DATE S_FLAG oracle 14-MAY-10 09.51.34.000000000 AM Start oracle 14-MAY-10 10.23.57.000000000 AM Finish administrator 14-MAY-10 09.51.38.000000000 AM Start administrator 14-MAY-10 09.51.38.000000000 AM Finish oracle 14-MAY-10 09.51.42.000000000 AM Start oracle 14-MAY-10 09.51.42.000000000 AM Finish It works very well, I had some fun trying to find a nasty query for the extraction engine so that the timestamps from in to out actually had a difference. That engine is fast! The only derived value you can pass from BIP is :xdo_user_name. None of the other server values are available. Connection pools are not currently supported but planned for a future release. Now you know what those fields are for and look for some official documentation, rather than my ramblings, coming soon!

    Read the article

  • Code is not the best way to draw

    - by Bertrand Le Roy
    It should be quite obvious: drawing requires constant visual feedback. Why is it then that we still draw with code in so many situations? Of course it’s because the low-level APIs always come first, and design tools are built after and on top of those. Existing design tools also don’t typically include complex UI elements such as buttons. When we launched our Touch Display module for Netduino Go!, we naturally built APIs that made it easy to draw on the screen from code, but very soon, we felt the limitations and tedium of drawing in code. In particular, any modification requires a modification of the code, followed by compilation and deployment. When trying to set-up buttons at pixel precision, the process is not optimal. On the other hand, code is irreplaceable as a way to automate repetitive tasks. While tools like Illustrator have ways to repeat graphical elements, they do so in a way that is a little alien and counter-intuitive to my developer mind. From these reflections, I knew that I wanted a design tool that would be structurally code-centric but that would still enable immediate feedback and mouse adjustments. While thinking about the best way to achieve this goal, I saw this fantastic video by Bret Victor: The key to the magic in all these demos is permanent execution of the code being edited. Whenever a parameter is being modified, everything is re-executed immediately so that the impact of the modification is instantaneously visible. If you do this all the time, the code and the result of its execution fuse in the mind of the user into dual representations of a single object. All mental barriers disappear. It’s like magic. The tool I built, Nutshell, is just another implementation of this principle. It manipulates a list of graphical operations on the screen. Each operation has a nice editor, and translates into a bit of code. Any modification to the parameters of the operation will modify the bit of generated code and trigger a re-execution of the whole program. This happens so fast that it feels like the drawing reacts instantaneously to all changes. The order of the operations is also the order in which the code gets executed. So if you want to bring objects to the front, move them down in the list, and up if you want to move them to the back: But where it gets really fun is when you start applying code constructs such as loops to the design tool. The elements that you put inside of a loop can use the loop counter in expressions, enabling crazy scenarios while retaining the real-time edition features. When you’re done building, you can just deploy the code to the device and see it run in its native environment: This works thanks to two code generators. The first code generator is building JavaScript that is executed in the browser to build the canvas view in the web page hosting the tool. The second code generator is building the C# code that will run on the Netduino Go! microcontroller and that will drive the display module. The possibilities are fascinating, even if you don’t care about driving small touch screens from microcontrollers: it is now possible, within a reasonable budget, to build specialized design tools for very vertical applications. Direct feedback is a powerful ally in many domains. Code generation driven by visual designers has become more approachable than ever thanks to extraordinary JavaScript libraries and to the powerful development platform that modern browsers provide. I encourage you to tinker with Nutshell and let it open your eyes to new possibilities that you may not have considered before. It’s open source. And of course, my company, Nwazet, can help you develop your own custom browser-based direct feedback design tools. This is real visual programming…

    Read the article

  • F1 Pit Pragmatics

    - by mikef
    "I hate computers. No, really, I hate them. I love the communications they facilitate, I love the conveniences they provide to my life. but I actually hate the computers themselves." - Scott Merrill, 'I hate computers: confessions of a Sysadmin' If Scott's goal was to polarize opinion and trigger raging arguments over the 'real reasons why computers suck', then he certainly succeeded. Impassioned vitriol sits side-by-side with rational debate. Yet Scott's fundamental point is absolutely on the money - Computers are a means to an end. The IT industry is finally starting to put weight behind the notion that good User Experience is an absolutely crucial goal, a cause championed by the likes of Microsoft's Bill Buxton, and which Apple's increasingly ubiquitous touch screen interface exemplifies. However, that doesn't change the fact that, occasionally, you just have to man up and deal with complex systems. In fact, sometimes you just need to sacrifice everything else in the name of performance. You'll find a perfect example of this Faustian bargain in Trevor Clarke's fascinating look into the (diabolical) IT infrastructure of modern F1 racing - high performance, high availability. high everything. To paraphrase, each car has up to 100 sensors, transmitting around 30Gb of data over the course of a race (70% in real-time). This data is then processed by no less than 3 servers (per car) so that the engineers in the pit have access to telemetry, strategy information, timing feeds, a connection back to the operations room in the team's home base - the list goes on. All of this while the servers are exposed "to carbon dust, oil, vibration, rain, heat, [and] variable power". Now, this is admittedly an extreme context where there's no real choice but to use complex systems where ease-of-use is, at best, a secondary concern. The flip-side is seen in small-scale personal computing such as that seen in Apple's iDevices, which are incredibly intuitive but limited in their scope. In terms of what kinds of systems they prefer to use, I suspect that most SysAdmins find themselves somewhere along this axis of Power vs. Usability, and which end of this axis you resonate with also hints at where you think the IT industry should focus its energy. Do you see yourself in the F1 pit, making split-second decisions, wrestling with information flows and reticent hardware to bend them to your will? If so, I imagine you feel that computers are subtle tools which need to be tuned and honed, using the advanced knowledge possessed only by responsible SysAdmins (If you have an iPhone, I suspect it's jail-broken). If the machines throw enigmatic errors, it's the price of flexibility and raw power. Alternatively, would you prefer to have your role more accessible, with users empowered by knowledge, spreading the load of managing IT environments? In that case, then you want hardware and software to have User Experience as their primary focus, and are of the "means to an end" school of thought (you're probably also fed up with users not listening to you when you try and help). At its heart, the dichotomy is between raw power (which might be difficult to use) and ease-of-use (which might have some limitations, but you can be up and running immediately). Of course, the ultimate goal is a fusion of flexibility, power and usability all in one system. It's achievable in specific software environments, and Red Gate considers it a target worth aiming for, but in other cases it's a goal right up there with cold fusion. I think it'll be a long time before we see it become ubiquitous. In the meantime, are you Power-Hungry or a Champion of Usability? Cheers, Michael Francis Simple Talk SysAdmin Editor

    Read the article

  • WIF, ASP.NET 4.0 and Request Validation

    - by Your DisplayName here!
    Since the response of a WS-Federation sign-in request contains XML, the ASP.NET built-in request validation will trigger an exception. To solve this, request validation needs to be turned off for pages receiving such a response message. Starting with ASP.NET 4.0 you can plug in your own request validation logic. This allows letting WS-Federation messages through, while applying all standard request validation to all other requests. The WIF SDK (v4) contains a sample validator that does exactly that: public class WSFedRequestValidator : RequestValidator {     protected override bool IsValidRequestString(       HttpContext context,       string value,       RequestValidationSource requestValidationSource,       string collectionKey,       out int validationFailureIndex)     {         validationFailureIndex = 0;         if ( requestValidationSource == RequestValidationSource.Form &&              collectionKey.Equals(                WSFederationConstants.Parameters.Result,                StringComparison.Ordinal ) )         {             SignInResponseMessage message =               WSFederationMessage.CreateFromFormPost(context.Request)                as SignInResponseMessage;             if (message != null)             {                 return true;             }         }         return base.IsValidRequestString(           context,           value,           requestValidationSource,           collectionKey,           out validationFailureIndex );     } } Register this validator via web.config: <httpRuntime requestValidationType="WSFedRequestValidator" />

    Read the article

  • jqGrid - customizing the multi-select option (restrict single selection and adding custom events)

    - by Renso
    Goal: Using the jgGrid to enable a selection of a checkbox for row selection - which is easy to set in the jqGrid - but also only allowing a single row to be selectable at a time while adding events based on whether the row was selected or de-selected. Environment: jQuery 1.4.4 jqGrid 3.4.4a Issue: The jqGrid does not support the option to restrict the multi-select to only allow for a single selection. You may ask, why bother with the multi-select checkbox function if you only want to allow for the selection of a single row? Good question, as an example, you want to reserve the selection of a row to trigger another kind of event and use the checkbox multi-select to handle a different kind of event; in other words, when I select the row I want something entirely different to happen than when I select to check off the checkbox for that row. Also the setSelection method of the jqGrid is a toggle and has no support for determining whether the checkbox has already been selected or not, So it will simply act as a switch - which it is designed to do - but with no way out of the box to only check off the box (as in not to de-select) rather than act like a switch. Furthermore, the getGridParam('selrow') does not indicate if the row was selected or de-selected, which seems a bit strange and is the main reason for this blog post. Solution: How this will act: When you check off a multi-select checkbox in the gird, and then commence to select another row by checking off that row's multi-select checkbox - I'm not talking there about clicking on the row but using the grid's multi-select checkbox - it will de-select the previous selection so that you are always left with only a single selection. Furthermore, once you select or de-select a multi-select checkbox, fire off an event that will be determined by whether or not the row was selected or de-selected, not just merely clicked on. So if I de-select the row do one thing but when selecting it do another. Implementation (this of course is only a partial code snippet):             multiselect: true,             multiboxonly: true,             onSelectRow: function (rowId) {                 var gridSelRow = $(item).getGridParam('selrow');                 var s;                 s = $(item).getGridParam('selarrrow');                 if (!s || !s[0]) {                     $(item).resetSelection();                     $('#productLineDetails').fadeOut();                     lastsel = null;                     return;                 }                 var selected = $.inArray(rowId, s) != -1;                 if (selected) {                     $('#productLineDetails').show();                 }                 else {                     $('#productLineDetails').fadeOut();                 }                 if (rowId && rowId !== lastsel && selected) {                     $(item).GridToForm(gridSelRow, '#productLineDetails');                     if (lastsel) $(item).setSelection(lastsel, false);                 }                 lastsel = rowId;             }, In the example code above: The "item" property is the id of the jqGrid. The following to settings ensure that the jqGrid will add the new column to select rows with a checkbox and also the not allow for the selection by clicking on the row but to force the user to have to click on the multi-select checkbox to select the row: multiselect: true, multiboxonly: true, Unfortunately the var gridSelRow = $(item).getGridParam('selrow') function will only return the row the user clicked on or rather that the row's checkbox was clicked on and NOT whether or not it was selected nor de-selected, but it retrieves the row id, which is what we will need. The following piece get's all rows that have been selected so far, as in have a checked off multi-select checkbox: var s; s = $(item).getGridParam('selarrrow'); Now determine if the checkbox the user just clicked on was selected or de-selected: var selected = $.inArray(rowId, s) != -1; If it was selected then show a container "#productLineDetails", if not hide that container away. The following instruction populates a form with the grid data using the built-in GridToForm method (just mentioned here as an example) ONLY if the row has been selected and NOT de-selected but more importantly to de-select any other multi-select checkbox that may have been selected: if (rowId && rowId !== lastsel && selected) {                     $(item).GridToForm(gridSelRow, '#productLineDetails');                     if (lastsel) $(item).setSelection(lastsel, false); }

    Read the article

  • Hey Retailers, Are You Ready For The Holiday Season?

    - by Jeri Kelley
    With online holiday spending reaching $35.3 billion in 2011 and American shoppers spending just under $750 on average on their holiday purchases this year, how ready is your business for the 2012 holiday season?   ?? Today’s shoppers do not take their purchases lightly.  They are more connected, interact with more resources to make decisions, diligently compare products and services, seek out the best deals, and ask for input from friends and family.   This holiday season, as consumers browse for apparel, tablets, toys, and much more, they will be bombarded with retailer communication - from emails and commercials to countless search engine results and social recommendations.  With a flurry of activity coming at consumers from every channel and competitor, your success this year will rely on communicating a consistent, personalized message no matter where your customers are shopping.  Here are a few ideas to help with your commerce strategy this holiday season: CONSISTENCY COUNTS FOR MULTICHANNEL SHOPPERS??According to a November 2011 study commissioned by Oracle, “Channel Commerce 2011: The Consumer View,” 54% of consumers in the U.S. and Canada regularly employ two or more channels before they make a purchase.  While each channel has its own unique benefit, user profile, and purpose, it’s critical that your shoppers have a consistent core experience wherever they’re looking for information or making a purchase.  Be sure consumers can consistently search and browse the same product information and receive the same promotions online, on their mobile devices, and in-store.? USE YOUR CUSTOMER’S CONTEXT TO SURFACE RELEVANT CONTENTYour Web site is likely the hub of your holiday activity.  According to a Monetate infographic, 39% of shoppers will visit your Web site directly to find out about the best holiday deals.   Use everything you know about your customers from past purchase data to browsing history to provide a relevant experience at every click, and assemble content in a context that entices shoppers to buy online, or influences an offline purchase.? TAKE ADVANTAGE OF MOBILE BEHAVIOR?Having a mobile program is no longer a choice.   Armed with smartphones and tablets, consumers now have access to more and more product information and can compare products and prices from anywhere.  In fact, approximately 52% of smartphone users will use their device to research products, redeem coupons and use apps to assist in their holiday gift purchase.  At a minimum, be sure your mobile environment has store information, consistent pricing and promotions, and simple checkout capabilities. ARM IN-STORE ASSOCIATES WITH TABLETS?According to RISNews.com, 31% of retailers plan to begin testing tablets in stores in 2012, 22% have already begun such testing and 6% had fully deployed tablets within stores.   Take advantage of this compelling sales tool to get shoppers interacting with videos, user reviews, how-to guides, side-by-side product comparisons, and specs.  Automatically trigger upsell and cross sell suggestions for store associates to recommend for each product or category, build in alerts for promotions, and allow associates to place orders and check inventory from their tablet.  ? WISDOM OF THE CROWDS IS GOOD, BUT WISDOM FROM FRIENDS IS BETTER?Shoppers who grapple with options are looking for recommendations; they’d rather get advice from friends, and they’re more likely to spend more while doing so.    In fact, according to an infographic by Mr. Youth, 66% of social media users made a purchase on Black Friday or Cyber Monday as a direct result of social media interactions with brands or family.   This holiday season, be sure you are leveraging your social channels from Facebook to Pinterest to drive consistent promotions and help your brand to become part of the conversation. So, are you ready for the holidays this year?  

    Read the article

  • An Unusual UpdatePanel

    - by João Angelo
    The code you are about to see was mostly to prove a point, to myself, and probably has limited applicability. Nonetheless, in the remote possibility this is useful to someone here it goes… So this is a control that acts like a normal UpdatePanel where all child controls are registered as postback triggers except for a single control specified by the TriggerControlID property. You could basically achieve the same thing by registering all controls as postback triggers in the regular UpdatePanel. However with this, that process is performed automatically. Finally, here is the code: public sealed class SingleAsyncTriggerUpdatePanel : WebControl, INamingContainer { public string TriggerControlID { get; set; } [TemplateInstance(TemplateInstance.Single)] [PersistenceMode(PersistenceMode.InnerProperty)] public ITemplate ContentTemplate { get; set; } public override ControlCollection Controls { get { this.EnsureChildControls(); return base.Controls; } } protected override void CreateChildControls() { if (string.IsNullOrWhiteSpace(this.TriggerControlID)) throw new InvalidOperationException( "The TriggerControlId property must be set."); this.Controls.Clear(); var updatePanel = new UpdatePanel() { ID = string.Concat(this.ID, "InnerUpdatePanel"), ChildrenAsTriggers = false, UpdateMode = UpdatePanelUpdateMode.Conditional, ContentTemplate = this.ContentTemplate }; updatePanel.Triggers.Add(new SingleControlAsyncUpdatePanelTrigger { ControlID = this.TriggerControlID }); this.Controls.Add(updatePanel); } } internal sealed class SingleControlAsyncUpdatePanelTrigger : UpdatePanelControlTrigger { private Control target; private ScriptManager scriptManager; public Control Target { get { if (this.target == null) { this.target = this.FindTargetControl(true); } return this.target; } } public ScriptManager ScriptManager { get { if (this.scriptManager == null) { var page = base.Owner.Page; if (page != null) { this.scriptManager = ScriptManager.GetCurrent(page); } } return this.scriptManager; } } protected override bool HasTriggered() { string asyncPostBackSourceElementID = this.ScriptManager.AsyncPostBackSourceElementID; if (asyncPostBackSourceElementID == this.Target.UniqueID) return true; return asyncPostBackSourceElementID.StartsWith( string.Concat(this.target.UniqueID, "$"), StringComparison.Ordinal); } protected override void Initialize() { base.Initialize(); foreach (Control control in FlattenControlHierarchy(this.Owner.Controls)) { if (control == this.Target) continue; bool isApplicableControl = false; isApplicableControl |= control is INamingContainer; isApplicableControl |= control is IPostBackDataHandler; isApplicableControl |= control is IPostBackEventHandler; if (isApplicableControl) { this.ScriptManager.RegisterPostBackControl(control); } } } private static IEnumerable<Control> FlattenControlHierarchy( ControlCollection collection) { foreach (Control control in collection) { yield return control; if (control.Controls.Count > 0) { foreach (Control child in FlattenControlHierarchy(control.Controls)) { yield return child; } } } } } You can use it like this, meaning that only the B2 button will trigger an async postback: <cc:SingleAsyncTriggerUpdatePanel ID="Test" runat="server" TriggerControlID="B2"> <ContentTemplate> <asp:Button ID="B1" Text="B1" runat="server" OnClick="Button_Click" /> <asp:Button ID="B2" Text="B2" runat="server" OnClick="Button_Click" /> <asp:Button ID="B3" Text="B3" runat="server" OnClick="Button_Click" /> <asp:Label ID="LInner" Text="LInner" runat="server" /> </ContentTemplate> </cc:SingleAsyncTriggerUpdatePanel>

    Read the article

  • NetworkManager Applet shows no networks

    - by Kkelk
    I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

    Read the article

  • Upgrade issues due to broken "dependency problems prevent configuration of linux-image-generic" error

    - by tsukune1791
    okay, I've recently upgrade from 11.10 to 12.04 and I've been having some issues. I don't know if its a bug or not, but I thought I would submit it here. Okay here's a little background; I ran the distro update from the update manager and got a couple errors that I didn't catch. the computer restarted, and when I logged the Launcher and my top bar of the Ubuntu desktop didn't load. While it was trying to load a couple error messages came up, I think they were called "apport", saying they couldn't send the bug information for some reason. I believe it said somethings wrong with my internet connection, but nothing's wrong with it. Anyway I tried running some things in terminal, namely sudo apt-get -f install sudo apt-get upgrade sudo apt-get dist-upgrade and keep getting the following errors; dustin@marceau-laptop:~$ sudo apt-get dist-upgrade [sudo] password for dustin: Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 4 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up initramfs-tools (0.99ubuntu13) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-24-generic (3.2.0-24.37) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/zz-runlilo 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-24-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-24-generic; however: Package linux-image-3.2.0-24-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.24.26); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/initramfs/post-update.d//runlilo exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic linux-image-generic linux-generic initramfs-tools localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) And my Ubuntu desktop is still not working. I can log into Gnome and Ubuntu 2D but the Launcher, I think it's call, doesn't load. Can someone help me fix these error, or point me in the right direction to get them fixed? It is much appriciated.

    Read the article

  • 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

    - by FlabbergastedPickle
    All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

    Read the article

  • Access Control Service: Transitioning between Active and Passive Scenarios

    - by Your DisplayName here!
    As I mentioned in my last post, ACS features a number of ways to transition between protocol and token types. One not so widely known transition is between passive sign ins (browser) and active service consumers. Let’s see how this works. We all know the usual WS-Federation handshake via passive redirect. But ACS also allows driving the sign in process yourself via specially crafted WS-Federation query strings. So you can use the following URL to sign in using LiveID via ACS. ACS will then redirect back to the registered reply URL in your application: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3dwsfederation%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f The wsfederation bit in the wctx parameter indicates, that the response to the token request will be transmitted back to the relying party via a POST. So far so good – but how can an active client receive that token now? ACS knows an alternative way to send the token request response. Instead of doing the redirect back to the RP, it emits a page that in turn echoes the token response using JavaScript’s window.external.notify. The URL would look like this: GET /login.srf?   wa=wsignin1.0&   wtrealm=https%3a%2f%2faccesscontrol.windows.net%2f&   wreply=https%3a%2f%2fleastprivilege.accesscontrol.windows.net%3a443%2fv2%2fwsfederation&   wp=MBI_FED_SSL&   wctx=pr%3djavascriptnotify%26rm%3dhttps%253a%252f%252froadie%252facs2rp%252frest%252f ACS would then render a page that contains the following script block: <script type="text/javascript">     try{         window.external.Notify('token_response');     }     catch(err){         alert("Error ACS50021: windows.external.Notify is not registered.");     } </script> Whereas token_response is a JSON encoded string with the following format: {   "appliesTo":"...",   "context":null,   "created":123,   "expires":123,   "securityToken":"...",   "tokenType":"..." } OK – so how does this all come together now? As an active client (Silverlight, WPF, WP7, WinForms etc). application, you would host a browser control and use the above URL to trigger the right series of redirects. All the browser controls support one way or the other to register a callback whenever the window.external.notify function is called. This way you get the JSON string from ACS back into the hosting application – and voila you have the security token. When you selected the SWT token format in ACS – you can use that token e.g. for REST services. When you have selected SAML, you can use the token e.g. for SOAP services. In the next post I will show how to retrieve these URLs from ACS and a practical example using WPF.

    Read the article

  • Handling Configuration Changes in Windows Azure Applications

    - by Your DisplayName here!
    While finalizing StarterSTS 1.5, I had a closer look at lifetime and configuration management in Windows Azure. (this is no new information – just some bits and pieces compiled at one single place – plus a bit of reality check) When dealing with lifetime management (and especially configuration changes), there are two mechanisms in Windows Azure – a RoleEntryPoint derived class and a couple of events on the RoleEnvironment class. You can find good documentation about RoleEntryPoint here. The RoleEnvironment class features two events that deal with configuration changes – Changing and Changed. Whenever a configuration change gets pushed out by the fabric controller (either changes in the settings section or the instance count of a role) the Changing event gets fired. The event handler receives an instance of the RoleEnvironmentChangingEventArgs type. This contains a collection of type RoleEnvironmentChange. This in turn is a base class for two other classes that detail the two types of possible configuration changes I mentioned above: RoleEnvironmentConfigurationSettingsChange (configuration settings) and RoleEnvironmentTopologyChange (instance count). The two respective classes contain information about which configuration setting and which role has been changed. Furthermore the Changing event can trigger a role recycle (aka reboot) by setting EventArgs.Cancel to true. So your typical job in the Changing event handler is to figure if your application can handle these configuration changes at runtime, or if you rather want a clean restart. Prior to the SDK 1.3 VS Templates – the following code was generated to reboot if any configuration settings have changed: private void RoleEnvironmentChanging(object sender, RoleEnvironmentChangingEventArgs e) {     // If a configuration setting is changing     if (e.Changes.Any(change => change is RoleEnvironmentConfigurationSettingChange))     {         // Set e.Cancel to true to restart this role instance         e.Cancel = true;     } } This is a little drastic as a default since most applications will work just fine with changed configuration – maybe that’s the reason this code has gone away in the 1.3 SDK templates (more). The Changed event gets fired after the configuration changes have been applied. Again the changes will get passed in just like in the Changing event. But from this point on RoleEnvironment.GetConfigurationSettingValue() will return the new values. You can still decide to recycle if some change was so drastic that you need a restart. You can use RoleEnvironment.RequestRecycle() for that (more). As a rule of thumb: When you always use GetConfigurationSettingValue to read from configuration (and there is no bigger state involved) – you typically don’t need to recycle. In the case of StarterSTS, I had to abstract away the physical configuration system and read the actual configuration (either from web.config or the Azure service configuration) at startup. I then cache the configuration settings in memory. This means I indeed need to take action when configuration changes – so in my case I simply clear the cache, and the new config values get read on the next access to my internal configuration object. No downtime – nice! Gotcha A very natural place to hook up the RoleEnvironment lifetime events is the RoleEntryPoint derived class. But with the move to the full IIS model in 1.3 – the RoleEntryPoint methods get executed in a different AppDomain (even in a different process) – see here.. You might no be able to call into your application code to e.g. clear a cache. Keep that in mind! In this case you need to handle these events from e.g. global.asax.

    Read the article

  • Oracle GoldenGate 11g Release 2 Launch Webcast Replay Available

    - by Irem Radzik
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif"; mso-fareast-font-family:"Times New Roman";} For those of you who missed Oracle GoldenGate 11g Release 2 launch webcasts last week, the replay is now available from the following url. Harnessing the Power of the New Release of Oracle GoldenGate 11g I would highly recommend watching the webcast to meet many new features of the new release and hear the product management team respond to the questions from the audience in a nice long Q&A section. In my blog last week I listed the media coverage for this new release. There is a new article published by ITJungle talking about Oracle GoldenGate’s heterogeneity and support for DB2 for iSeries: Oracle Completes DB2/400 Support in Data Replication Tool As mentioned in last week’s blog, we received over 150 questions from the audience and in this blog I'd like to continue to post some of the frequently asked,  questions and their answers: Question: What are the fundamental differences between classic data capture and integrated data capture? Do both use the redo logs in the source database? Answer: Yes, they both use redo logs. Classic capture parses the redo log data directly, whereas the Integrated Capture lets the Oracle database parse the redo log record using an internal API. Question: Does GoldenGate version need to match Oracle Database version? Answer: No, they are not directly linked. Oracle GoldenGate 11g Release 2 supports Oracle Database version 10gR2 as well. For Oracle Database version 10gR1 and Oracle Database version 9i you will need GoldenGate11g Release 1 or lower. And for Oracle Database 8i you need Oracle GoldenGate 10 or earlier versions. Question: If I already use Data Guard, do I need GoldenGate? Answer: Data Guard is designed as the best disaster recovery solution for Oracle Database. If you would like to implement a bidirectional Active-Active replication solution or need to move data between heterogeneous systems, you will need GoldenGate. Question: On Compression and GoldenGate, if the source uses compression, is it required that the target also use compression? Answer: No, the source and target do not need to have the same compression settings. Question: Does GG support Advance Security Option on the Source database? Answer: Yes it does. Question: Can I use GoldenGate to upgrade the Oracle Database to 11g and do OS migration at the same time? Answer: Yes, this is a very common project where GoldenGate can eliminate downtime, give flexibility to test the target as needed, and minimize risks with fail-back option to the old environment. For more information on database upgrades please check out the following white papers: Best Practices for Migrating/Upgrading Oracle Database Using Oracle GoldenGate 11g Zero-Downtime Database Upgrades Using Oracle GoldenGate Question: Does GoldenGate create any trigger in the source database table level or row level to for real-time data integration? Answer: No, GoldenGate does not create triggers. Question: Can transformation be done after insert to destination table or need to be done before? Answer: It can happen in the Capture (Extract) process, in the  Delivery (Replicat) process, or in the target database. For more resources on Oracle GoldenGate 11gR2 please check out our Oracle GoldenGate 11gR2 resource kit as well.

    Read the article

  • Why won't my Broadcom BCM4312 LP-PHY work with the STA driver?

    - by Jackson Taylor
    I tried the steps here for a 4312: https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx Both of these: sudo modprobe -r b43 ssb wl sudo modprobe wl return: FATAL: Module wl not found. FATAL: Error running install command for wl (this one is only for the second one actually) I tried the broadcom-sta, didn't work. What's confusing is down below in the next steps for STA with internet access it says to use the bcmwl one. So I install that and it succeeds but with some errors: sudo apt-get install bcmwl-kernel-source Reading package lists... Done Building dependency tree Reading state information... Done The following package was automatically installed and is no longer required: module-assistant Use 'apt-get autoremove' to remove it. The following NEW packages will be installed: bcmwl-kernel-source 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded. Need to get 0 B/1,181 kB of archives. After this operation, 3,609 kB of additional disk space will be used. Selecting previously unselected package bcmwl-kernel-source. (Reading database ... 168005 files and directories currently installed.) Unpacking bcmwl-kernel-source (from .../bcmwl-kernel-source_5.100.82.112+bdcom-0ubuntu3_amd64.deb) ... Setting up bcmwl-kernel-source (5.100.82.112+bdcom-0ubuntu3) ... Loading new bcmwl-5.100.82.112+bdcom DKMS files... Building only for 3.5.0-21-generic Building for architecture x86_64 Module build for the currently running kernel was skipped since the kernel source for this kernel does not seem to be installed. ERROR: Module b43 does not exist in /proc/modules ERROR: Module b43legacy does not exist in /proc/modules ERROR: Module ssb does not exist in /proc/modules ERROR: Module bcm43xx does not exist in /proc/modules ERROR: Module brcm80211 does not exist in /proc/modules ERROR: Module brcmfmac does not exist in /proc/modules ERROR: Module brcmsmac does not exist in /proc/modules ERROR: Module bcma does not exist in /proc/modules FATAL: Module wl not found. FATAL: Error running install command for wl update-initramfs: deferring update (trigger activated) Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.5.0-21-generic jtaylor991@jtaylor991-whiteHP:~$ sudo modprobe wl FATAL: Module wl not found. FATAL: Error running install command for wl Then I do the modprobe wl commands listed above and it gives the above listed errors. It didn't work with the broadcom-sta driver either. I installed the b43 ones but nothing happened, and I don't know why so those are still installed. firmware-b43legacy-installer, b43-fwcutter and firmware-b43-lpphy-installer (yes it is a LP-PHY) are currently installed. If I go into System Settings Software Sources Additional Drivers it says "Using Broadcom 802.11 Linux STA wireless driver source from bcmwl-kernel-source (proprietary) But bcmwl-kernel-source isn't installed. I could try again but I remember rebooting and it still said this. What's funny is it found wireless networks during the Ubuntu setup/installation, I don't remember if I got it to connect or not though. I think it kept asking for a password when I put it in (yes it was right I showed password and looked at it) so I just ignored it. But right now the Enable Wireless option in the top right is just gone, it's just Enable Networking and I'm on ethernet on this HP Pavilion dv4-1435dx right here. If I run rfkill list it shows: 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no It was hard blocked at the beginning but unblocking it makes no change. Also it's a touch sensitive button, and it appears to be always orange no matter if it's enabled or not because when I touch it the hard blocked changes between yes and no in rfkill list. I think it was blue for a minute at one point. What is going on?!?! Help me! Lol, thanks for any and all of your time guys. Oh yeah this is Ubuntu 12.10 fresh install.

    Read the article

  • NHibernate Pitfalls: Custom Types and Detecting Changes

    - by Ricardo Peres
    This is part of a series of posts about NHibernate Pitfalls. See the entire collection here. NHibernate supports the declaration of properties of user-defined types, that is, not entities, collections or primitive types. These are used for mapping a database columns, of any type, into a different type, which may not even be an entity; think, for example, of a custom user type that converts a BLOB column into an Image. User types must implement interface NHibernate.UserTypes.IUserType. This interface specifies an Equals method that is used for comparing two instances of the user type. If this method returns false, the entity is marked as dirty, and, when the session is flushed, will trigger an UPDATE. So, in your custom user type, you must implement this carefully so that it is not mistakenly considered changed. For example, you can cache the original column value inside of it, and compare it with the one in the other instance. Let’s see an example implementation of a custom user type that converts a Byte[] from a BLOB column into an Image: 1: [Serializable] 2: public sealed class ImageUserType : IUserType 3: { 4: private Byte[] data = null; 5: 6: public ImageUserType() 7: { 8: this.ImageFormat = ImageFormat.Png; 9: } 10: 11: public ImageFormat ImageFormat 12: { 13: get; 14: set; 15: } 16: 17: public Boolean IsMutable 18: { 19: get 20: { 21: return (true); 22: } 23: } 24: 25: public Object Assemble(Object cached, Object owner) 26: { 27: return (cached); 28: } 29: 30: public Object DeepCopy(Object value) 31: { 32: return (value); 33: } 34: 35: public Object Disassemble(Object value) 36: { 37: return (value); 38: } 39: 40: public new Boolean Equals(Object x, Object y) 41: { 42: return (Object.Equals(x, y)); 43: } 44: 45: public Int32 GetHashCode(Object x) 46: { 47: return ((x != null) ? x.GetHashCode() : 0); 48: } 49: 50: public override Int32 GetHashCode() 51: { 52: return ((this.data != null) ? this.data.GetHashCode() : 0); 53: } 54: 55: public override Boolean Equals(Object obj) 56: { 57: ImageUserType other = obj as ImageUserType; 58: 59: if (other == null) 60: { 61: return (false); 62: } 63: 64: if (Object.ReferenceEquals(this, other) == true) 65: { 66: return (true); 67: } 68: 69: return (this.data.SequenceEqual(other.data)); 70: } 71: 72: public Object NullSafeGet(IDataReader rs, String[] names, Object owner) 73: { 74: Int32 index = rs.GetOrdinal(names[0]); 75: Byte[] data = rs.GetValue(index) as Byte[]; 76: 77: this.data = data as Byte[]; 78: 79: if (data == null) 80: { 81: return (null); 82: } 83: 84: using (MemoryStream stream = new MemoryStream(this.data ?? new Byte[0])) 85: { 86: return (Image.FromStream(stream)); 87: } 88: } 89: 90: public void NullSafeSet(IDbCommand cmd, Object value, Int32 index) 91: { 92: if (value != null) 93: { 94: Image data = value as Image; 95: 96: using (MemoryStream stream = new MemoryStream()) 97: { 98: data.Save(stream, this.ImageFormat); 99: value = stream.ToArray(); 100: } 101: } 102: 103: (cmd.Parameters[index] as DbParameter).Value = value ?? DBNull.Value; 104: } 105: 106: public Object Replace(Object original, Object target, Object owner) 107: { 108: return (original); 109: } 110: 111: public Type ReturnedType 112: { 113: get 114: { 115: return (typeof(Image)); 116: } 117: } 118: 119: public SqlType[] SqlTypes 120: { 121: get 122: { 123: return (new SqlType[] { new SqlType(DbType.Binary) }); 124: } 125: } 126: } In this case, we need to cache the original Byte[] data because it’s not easy to compare two Image instances, unless, of course, they are the same.

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >