Search Results

Search found 3674 results on 147 pages for 'floppy drives'.

Page 83/147 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• How are USB ports related to the computer power, and why would they cause my computer to freeze?

  - by BDuelz

  I have an issue with my new Toshiba laptop. Whenever I plug in an external USB device, if the laptop is not plugged in to the wall, the laptop freezes. However, nothing happens if the laptop is plugged in to the wall. When I say the laptop freezes, I mean it really freezes. The only way to recover is to hard reboot. My question is, what could be causing this? Could it be the extra power drain from the sub devices that causes this (even the simplest flash drives cause a freeze)? Please help me out, it's very annoying. Thanks

  Read the article

• No partition on USB Flash Drive?

  - by Skytunnel

  A friend gave me a corrupted USB memory stick to try recovery data from. But I've had some unusual results, so thought I'd share to see if anyone is familiar with this problem... First off I just tried opening from my own PC. Windows prompted to Format the drive, which I of course declined Downloaded TestDisk to anaylsis the drive. And right away I noticed something strange, on the listed drives it comes up as Disk /dev/sdc - 6144 B - USB Flash Drive That's right, the first USB flash drive smaller than a floppy disk!? Moving on anyway... first anaylsis comes up with: Partition sector doesn't have the endmark 0xAA55 TestDisk's Quick Search gave no results, moved on to Deeper Search: No partition found or selected for recovery This left me stumped. I tired a couple of other programs with no success I did manage to get a backup image, but it was just as small as TestDisk indicated, so nothing of use on it After a few hours trying various suggestions from other sources, I gave in and just tried formatting the drive. But returned the message: Windows was unable to complete the format. From googling that, the suggestion was to delete the partition. But there is no partition to delete in this case. most recently I've tried formatting from cmd, and got this result: Format D: /FS:FAT32 The type of the file system is RAW The new file system is FAT32 Verifying 0M 11 bad sectors were encountered during the format. These sectors cannot be guaranteed to have been cleaned The volume is too small for FAT32 Anyone got any suggestions? UPDATE: As per suggestion from @Karen, I tried running a CLEAN from DISKPART, results as follows DiskPart has encountered an error: The request could not be preformed because of an I/O device error.

  Read the article

• Please help, mounting other partitions on startup [duplicate]

  - by Kongthap

  This question already has an answer here: Is there a program to mount all of my drives automatically? 2 answers These are my all partitions. This is my /etc/fstab I would like to auto mount sda3 (NTFS), sda6 (ext4), sda7 (ext4) on startup, please help me edit the /etc/fstab file. I've searched for GUI way of doing this but I cannot find pysdm on the software center. Thanks. Edited!!! I've edited fstab as shown in the picture, I got error during booting, please help me find out what went wrong. P.S. I've created /mnt/extdisk1, I copied and pasted the UUID so it was not misspelling.

  Read the article

• installing ubuntu 13.04 along side window 7 64 bit

  - by Shikhar Subedi

  I have a 64 bit computer with windows OS. Here are my specifications: core i3 processor 4 gb ram nvdia ge210 hard disk with 680 gb memory In my windows installation I have C: drive with 104 gb, D: drive with 246gb and E: drive with 246gb memory. My dvd rom is in f: drive. I want to install ubuntu 13.04 64 bit along side windows 7. So i burned the ubuntu 64 bit iso image onto a dvd and restarted the computer. but in the choice for installations, there is no option to select installing ubuntu along side windows. There is an option to install ubuntu inside windows instead. There are other options as well. What should I do to get the option to install ubuntu along side windows. I think the problem is with the number of drives in windows. Please tell me how should I make a partition in windows 7 to install ubuntu. Thanks a lot..

  Read the article

• Who Provides Internet Service for My Internet Service Provider?

  - by Jason Fitzpatrick

  You pay your Internet Service Provider (ISP) for internet access, and they turn on the sweet, sweet, fire hose of data for you. But who provides the flow for your ISP? Read on to learn the ins and outs of global data delivery. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. HTG Explains: How Windows Uses The Task Scheduler for System Tasks HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How

  Read the article

• usb drive filesystem?

  - by purbleguy

  So, school is approaching quickly, and one of the things on my supply list is a usb drive. Now I'm asking myself what filesystem to use. After some research, I found ext4 to be the most stable drive filesystem. But, I also found that Windows (The OS used by every computer in my school) can't read ext4 formatted drives without special drivers, and I'm sure the school wouldn't be too happy with me having to install the windows ext4 drivers on every computer I use with my usb. So, my question is, Should I use fat32, one of the ext filesystems (2, 3 or 4 would work) or NTFS, I have an ubuntu laptop, a Mac desktop, and of course the school computers I use are Windows, so which would be the best filesystem for my usb.

  Read the article

• Is it possible to allow the User Account to access the 'Volumes' without asking the Administrator's password?

  - by Tom

  Am the administrator of my Ubuntu system. Recently I added a new user account. But when ever the user tries to access or open the 'Volumes'(Drives where movies, songs and other files are stored) it asks for the Administrator's password. I created the user account to my other family members and I don't want to tell them my password. So is it possible to allow them to access the Volumes without asking Administrator's password ? UPDATE : Ubuntu was installed alongside Windows in my system. I will provide a screenshot of the Volume details -

  Read the article

• The device is not ready

  - by hmloo

  When you retrieve the drive info using the DriveInfo class, if you don't use the IsReady property to test whether a drive is ready, it will throw error as "The device is not ready". so you must use IsReady property to determines if the drive is ready to be queried, written to, or read from. The following code example demonstrates querying information for all drives on current system. using System; using System.IO; class Test { public static void Main() { DriveInfo[] allDrives = DriveInfo.GetDrives(); foreach (DriveInfo d in allDrives) { Console.WriteLine("Drive {0}", d.Name); Console.WriteLine(" File type: {0}", d.DriveType); if (d.IsReady == true) { Console.WriteLine(" Volume label: {0}", d.VolumeLabel); Console.WriteLine(" File system: {0}", d.DriveFormat); Console.WriteLine( " Available space to current user:{0, 15} bytes", d.AvailableFreeSpace); Console.WriteLine( " Total available space: {0, 15} bytes", d.TotalFreeSpace); Console.WriteLine( " Total size of drive: {0, 15} bytes ", d.TotalSize); } } } }

  Read the article

• Which software should I use on Ubuntu to create a Windows XP LiveUSB? [closed]

  - by user92241

  Possible Duplicate: How to create Windows XP LiveUSB using Ubuntu to replace it Since many programs that I need only work on XP, I need to install Windows XP on my 2 laptops but I can't use an optical drive, which makes using a USB the only option. If it helps, I can tell you that I used to have Vista and Windows 7 on my 2 laptops but I clean installed Ubuntu 12.04 on one, and Lubuntu on the other. Also I have no trace of Windows left on any of my laptops, when I bought my laptops they came without a Windows CD, so I only had a 20GB partition on my hard drives (which I formatted when I clean installed Ubuntu and Lubuntu.) Also, I have no problem with clean installing Windows XP and the reinstalling Ubuntu/Lubuntu so I can dual boot. Thanks! Edit: I have a ISO file ready, on a USB.

  Read the article

• Why does installing 11.10 or 12.04 on old laptops fail?

  - by Adam

  I recently reimaged my Lenovo t400 with Ubuntu. However, after wiping two other systems (Compaq Presario 2100 and Dell Latitude D600) both hUbuntu 11.10 and Ubuntu 12.04 fail to load on boot. I am concerned that there is some type of issue using Ubuntu on these older systems as every part of the process has been repeated/attempted several times in the same manner as practiced in the successful load of the newer Lenovo t400. I now have two laptops without an operating system as the discs/thumb drives that were formatted to load on these devices do not seem to work. I would appreciate any assistance that you may be able to provide. Regards, -Adam

  Read the article

• Why do the Nouveau drivers work better than the Nvidia ones?

  - by user50774

  I have a bit of a weirdie here. My rig uses an Nvidia GeForce 8600 GTS in a PCIE x16 slot. Up to about a year ago, no problems with the card. I then started getting random crashes. They got more frequent. Now, first thought: It's an old card. But I don't have the bucks to buy a new one, and my mobo doesn't have the DVI input that my monitor needs. So, I decided to take a shot with the Nouveau drives. Amazingly, they have worked flawlessly. Does anyone have a guess as to why?

  Read the article

• HP DL380 G3 2U For Basic Web Server in 2012

  - by ryandlf

  I have an opportunity to pick up a used HP DL380 G3 2U for $100. I'm looking for a basic entry level web server that I can host a small - medium size website on and more or less learn the ins and outs of running my own web server before I bite the bullet and spend a couple grand on a server. The specs are: Dual (2) Intel Xeon 2.4GHz 400MHz 512KB Cache 4GB PC2100 ECC Registered Memory 6 x 72GB 10K U320 SCSI Hard Drives Smart Array 5i RAID Controller Redundant Power Supplies DVD/Floppy, Dual Intel GB NIC's, USB Or would I be better off spending a couple hundred bucks on something like: this new HP Seems like the only major difference is SATA and a bit of storage, but I will likely be implementing a separate storage system of some sort anyways. I guess it also wouldn't hurt to mention that I plan on running a linux server distro, so would the hardware be likely to support linux with a system that is 4 generations old? I don't mind spending a couple hundred extra dollars if its a better solution, but as mentioned previously I am simple looking for a server to learn on and probably use for a year or so while I put together a small - medium size website.

  Read the article

• Problem with Amiga 1200 accelerator board

  - by cc0

  I just recently walked past a dump, where in the corner of my eye I spotted something that looked like a huge keyboard. I went to take a closer look, and found out that it was an Amiga 1200 with a 030 accellerator board and scala dongle. Jackpot! So anyway; I dried it, cleaned it, it works, but the floppy was not powering on and same with the harddrive. I am using an old Amiga 1200 PSU that was making some strange high pitch noise when I tried to boot the amiga with the harddrive installed in it. I removed the harddrive and it booted fine with the PSU not emitting any detectable noise. However, when I have the 030 installed it sometimes reboots and shows a red "Software Error" screen. I tried removing the memory on the board, same effect. Sometimes it does not boot at all, just gives a black screen. Someone suggested the card had problems with 3.1 roms, but this amiga has only 3.0 roms installed. Does anyone have any apparent theories as to why it seems unstable? I don't have any other Amiga parts to cross-swap with to test a lot of things, so I'd really appreciate some sound input here so I'd know what to look for in order to try fix it. And merry Christmas everyone :]

  Read the article

• Hardware question; booting ubuntu off of USB flash drive?

  - by Kon

  I'm currently running ubuntu off of a USB 3.0 flash drive on my laptop, and I have another USB 3.0 flash drive I use for storing larger files that I need to access and whatnot. But the issue is that both of the usb 3.0 flash drives don't fit next to each other at all, so I'm forced to use another usb 2.0 port located in a different spot on my laptop. Now my question is that if I use a USB 3.0 hub will that slow my connections down at all? or cause some sort of interference? Another question I had which I was unable to find anywhere on the internet is if there was a USB 3.0 hub with more than one upstream connection? Thanks for your time!

  Read the article

• Oracle Linux screen freezes during installation

  - by Fearless

  I was installing Oracle Linux 6.4 on a server, and the screen suddenly froze. Here were the previous steps: I put in the disk, clicked install, checked the disk (no errors), did pre-install setup (clock, root password, host+domain name, etc.), configured two 40GB hard drives in a RAID1 array (no swap, 3100mb encrypted raid partitions, ~100mb ext4 partition mounting to /boot, encrypted ext4 RAID device with mounting to /), selected packages, hit continue. The system did its short preinstall processes, then when to the main installation screen with the long status bar. The installer proceeded like always, but around package 250 out of ~1000, the screen suddenly went black with a text cursor in the upper left corner of the screen and the mouse cursor in its previous place. Neither cursor moved and the only thing that triggered a response was a ctrl-alt-delete that rebooted it. I have run this in VMs before without this issue. Memtest hasn't reported anything, and the media check went smoothly. The machine has supported Ubuntu server without issues before. Any ideas? I have tried booting after that, but the grub bootloader tries to find fd0 for some reason (I have no idea why it would search for the floppy disk). UPDATE My server successfully installed, but won't boot up. I think that, for some reason, it is still using the old bootloader from the previous installation. Any ideas on how to fix that?

  Read the article

• 12.04 Software "RAID 0" on desktop replacement, 2 HDD?

  - by gregzeng

  Hardware: HP Pavilion DV7 notebook: 8GB DDR3, 2x 750GB SATA2 HDD, I7 c+ Radeon GPU, eSATA, Bluray, etc. Currently multiboot with Win7-64 + choice of 5 'buntu-64. Prefer Xubuntu-64-alternate, but not able to install software RAID-0 at the last active partition on both HDDs. Tried many types: real boot partition, etc. All my Linux op sys boot successfully from the extended partitions on both drives, but without RAID of any kind. Theory - yes. But has anyone really succeeded with 12.04 software RAID-0?

  Read the article

• Your favorite LiveCD

  - by sova

  Perhaps this is a question better suited for linux.se but since I have servers on all environments I was wondering what your favorite LiveCD is. Wiki defines this, for those unfamiliar, as a CD or DVD containing a bootable computer operating system. Live CDs are unique in that they have the ability to run a complete, modern operating system on a computer lacking mutable secondary storage, such as a hard disk drive. Live USB flash drives are similar to live CDs, but often have the added functionality of automatically and transparently writing changes back to their bootable medium. I tend to stick with Knoppix, and today I have to register the machine on the network before I can get any of my utilities running via IP. Any suggestions?

  Read the article

• How to completely remove Ubuntu?

  - by les02jen17

  I installed Ubuntu using Wubi installer, but I couldnt boot to it. So I uninstalled it on the Control Panel. Then I tried the full installation wherein it boots to the Ubuntu environment. After installing Ubuntu there, I couldnt boot to my Windows 7 anymore! So in an attempt to salvage the whole thing, I inserted the Ubuntu CD again and chose Erase Ubuntu and Reinstall. (I was wondering, why wasn't there an option to just "Erase Ubuntu"?) I did that though, and I got my Windows 7 back. But upon checking my drives via the "Create your own partition scheme" (not sure if it's the exact words) I saw that one of my partitions still has Ubuntu on it, and there's no way I can delete it if I don't overwrite another Ubuntu! I can't access that partition on windows 7 either! Need help!

  Read the article

• Moving Day

  - by Christopher House

  I've decided that it's time for me to move on from Geeks with Blogs.  It's been a great platform but unforuntately I've not used it nearly as much as I should.  It's been over a year and a half since my last post.  It's not that I haven't had worthwhile stuff to post, it's more due to a lack of motivation.  Knowing how I work, I think part of the problem with me using GWB is that it's free.  If I don't use it, I don't feel like I'm wasting anything.  With that in mind, I've decided to move to a paid host in hopes that drives me to post more frequently.  My new blog is located at the following address:http://thirteendaysaweek.comIn the coming days and weeks I'll be working on moving my content to the new site and will leave posts here that redirect to the new site.

  Read the article

• Unneeded RAID recovery

  - by Shinhan

  I have two software RAID 5s. Today when I turned on my server (after it was off for two weeks when I was on vacation), I got the message that the software RAID is degraded and was offered RAID recovery console or boot degraded. No idea what to do in that recovery console btw, so I just exited it. After the boot finished normally I took a peak at /proc/mdstat but there is nothing amiss there. So I took a look at mdadm --detail /dev/md0 (and md1) and again everything looks fine with Failed Devices being 0 both times. Next I took a look at smartctl --alll /dev/sdX for all of the drives and Reallocated_Sector_Ct is 0. (Lots of other zeros, all numbers look to me fine) Anybody have any ideas why I'm getting the RAID recovery message on boot when nothing seems bad?

  Read the article

• Cannot boot Windows 7 after installing Ubuntu 13.04

  - by whowantsakookie

  So I boot up my computer after installing Ubuntu 13.04. Grub correctly shows me all available boot options and I am able to boot to Ubuntu. However, when I try to boot into Windows 7, grub hangs at a purple screen. I have an HP laptop. It came with all four primary partitions taken up by the Windows bootloader, the actual Windows partition, one called HP_TOOLS, and another for HP Restore. I was able to back up and delete HP_TOOLS and the recovery partition, and change my disk type from Dynamic to Basic (GParted doesn't recognize Dynamic drives). I then booted into a live session of Ubuntu and made two partitions with GParted: one large partition for storage space that I could use between the two operating systems (sda4), and another extended partition (sda3) which contained Ubuntu (sda6) and it's swap space (sda5). It currently looks like this: I'm not sure if the second paragraph is actually relevant, I just want you to know all the variables in the equation. Thank you in advance for helping this poor noob.

  Read the article

• How to install Ubuntu on PC with no detected OS?

  - by brad54322

  I have a Spanish OS based on 11.04 called 'Darwin OS'. After installing it, the setup file still existed on the desktop. So, I opened it to see what would happen. It got stuck at Detecting file systems so I just closed it. Later, I started having a lot of problems with the OS so I decided to switch to the normal 12.04. But when I booted from my USB, it said An Operating System wasn't found. Try disconnecting any drives that don't contain an Operating system. Press Ctrl-Alt-Del to restart. I tried that a couple of times but nothing happened. What should I do?

  Read the article

• My Computer in Ubuntu?

  - by Casey Hungler

  I was wondering if Ubuntu has an equivalent to the Windows feature "My Computer", which lists all available drives/storage devices. Typically, My Computer shows C:, which can be opened to view all of your directories and files. At this point, it is very similar to Ubuntu's Home Folder, but I am looking for something that allows me to view/select all available HDD's/Partitions. Here's my reason: I found a 6gb IDE HDD in my basement, and got an IDE cable for it. My desktop computer has a SATA drive in it, but has an IDE slot, so I wanted to plug it in and see what might be on it. The drive seems to be recognized in BIOS, but I can't find it in Ubuntu to view files, and Ubuntu is the only OS on that particular computer. If anyone has any ideas as to how to view the contents of that drive WITHOUT formatting it or tampering with the contents in any way, I would greatly appreciate your help. Thanks in advance!

  Read the article

• Windows not recognizing its system drive after installing Ubuntu 11.10 alongside with windows 7. What to do?

  - by user53322

  After installing Ubuntu 11.10, it boots perfectly. But when I select Windows 7 from the GRUB menu, it restarts after showing the boot logo. I tried to repair the boot loader but the process failed. Then I decide to repair with system recovery disc. There I realize the system is unable to find any existing system. Then I boot into ubuntu and here I can see all the existing drive (with all content). All drives are still NTFS file system (I have 4 drive: 3 are NTFS another 1 is ext4). Tried to repair with gparted partition tool, but came with no luck. Also tried to reinstall windows but installer don't show any available drive. What to do? (something to do with Ubuntu?)

  Read the article

• HTG Explains: What are Shadow Copies and How Can I Use Them to Copy or Backup Locked Files?

  - by Jason Faulkner

  When trying to create simple file copy backups in Windows, a common problem is locked files which can trip up the operation. Whether the file is currently opened by the user or locked by the OS itself, certain files have to be completely unused in order to be copied. Thankfully, there is a simple solution: Shadow Copies. Using our simple tool, you can easily access shadow copies which allows access to point-in-time copies of the currently locked files as created by Windows Restore. Image credit: Best Backup Services How To Use USB Drives With the Nexus 7 and Other Android Devices Why Does 64-Bit Windows Need a Separate “Program Files (x86)” Folder? Why Your Android Phone Isn’t Getting Operating System Updates and What You Can Do About It

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >