Search Results

Search found 2481 results on 100 pages for 'hp storageworks'.

Page 83/100 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Sound in Ubuntu 12.10 on Chromebook

  - by Paul Mennega

  I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

  Read the article

• 12.0.4.3 - Missing Battery Icon, auto Suspend not working, Keyboard shortcuts volume up/down no longer working

  - by Navraj

  Problems I am experiencing: Battery Icon not showing up unity bar (top right corner). Volume Up/Down/Mute not working. Bluetooth hot keys described above also not working.Brightness up/down keys on this keyboard no longer working (apple wireless keyboard) Laptop no longer suspends when lid is shut. I have to go to 'power' button on top right corner and click on 'Suspend' All was working flawlessly until I did the following: I have recently upgraded to Nvidia propriety driver version 319 {version recommended}. Installed Xscreensaver and then removed it and went back to default screensaver. Done a system update (1st since installing) and now currently running: Linux 3.8.0-32-generic #47~precise1-Ubuntu SMP Wed Oct 2 16:19:35 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux NOTE: Base system was ubuntu 12.04.3 installed from ISO however lsb_release reports "No LSB modules are available" 4.installed psensor. I have check power setting (via Settings) and power setting via dconf-editor and set to recommended settings as described in posts detailing solution to this problem. - I have disabled 1) Nvdia settings at startup and 2) psensor at startup but this does not help. I am using an HP DV7 with 2GB Nvidia card. Not using any fancy graphics features. Recommendations? Thanks.

  Read the article

• How to install Ubuntu 13.10 on Hybrid Disk alongside Windows 8.1

  - by user205691

  I am having trouble installing Ubuntu 13.10 on HP Envy 4-1046tx ultrabook. When i bought this, it came with windows 7 pre-installed, but i upgraded it to 8 and now recently to 8.1. But somehow, i feel 8.1 is slower or something went wrong with the upgrade and made my system slow. I want to try Dual booting Ubuntu 13.10 with windows 8.1 The system recovery drive has windows 7 recovery files. SSD has 4GB allocated to windows 8 (i think for hibernation/rapid start). 25GB of SSD is free and i want to install ubuntu on this SSD pointing it to "/" I will also shrink the windows partition (the only other partition available apart from recovery & SSD) to free up 100GB and allocate this space to "/home" during ubuntu installation. I tried the above steps while on windows 8, but not successful. Ubuntu installation went fine, but the grub was not loaded. I tried to deploy linux via EasyBCD, but after that also, selecting linux in the boot would load grub on command prompt and do nothing. While ubuntu installation, i also deleted the raid drivers with sudo dmraid -rE, but still ubuntu didnt recognize my windows. I think i am missing some steps, so this time i want to do it right with proper info before starting the process. My requirements: dual boot Ubuntu with windows 8.1 c:\ shrinked windows with 300GB on sda1, 100GB for /home on sda1 & ubuntu installed on 25GB SSD volume sda2 (this is mSata i think) GRUB or EFI that helps me load both OS properly without breaking anything SWAP partition can be added if needed on sda1 (4gb?)? I have backed up my drive and have a 16GB usb3.0 with ubuntu loaded. I hope i have mentioned everything i need and know.. All i need now is some guidance and what to do right so that this installation goes as planned :)

  Read the article

• Multiple monitors showing same screen but different resolutions

  - by Luis Alvarado

  Is it possible to have 2 or more monitors showing the same screen, for example the same desktop but with different resolutions. Like the clone option in Nvidia or the mirror option using the Display settings in Ubuntu but instead of showing the same output with the same resolution, the both show the same output using a resolution that is native for each monitor connected. In my case if I have a netbook that has max resolution of 1360x768 and a TV that has 1280x1024, the would both show the same desktop but each with their own resolution that is compatible for each device. This would help in trying to find a resolution that works on both monitors and in cases like a mini netbook and a huge TV it would solve issues like having max 800x600 in one monitor and min 1024x768 in the other. In the case I tested I was using an HDMI cable but this question also involves VGA and any other connection. I have 3 tests scenarios for this: Scenario 1 - Laptop HP DV6000 (Intel Integrated Video) with 1360x760 connected to a Samsung LED 42 TV that has 1280x900. Scenario 2 - Laptop EEE with 1024x600 (Intel Integrated Video) connected to Sony LCD TV that supports 1280x900. Scenario 3 - Intel Desktop with Nvidia 440 GT with HDMI connected to Soneview 32' TV that supports 1920x1080 and VGA connected to an Epson Video Beam that supports 1280x1024 max. In this 3 scenarios I need to be able to show the same desktop and same views but on different resolutions for each output device. UPDATE: Tested with Xubuntu and the way it handles multiple monitors is precisely what I am asking. The ability to handle the resolution of different monitors showing the same thing.

  Read the article

• Oracle Exadata?????????? ??1

  - by takashi.hitomi

  2009?7?~2010?5????Oracle Exadata???????????????? 2010?4?15? ???? ???????????? ? ??????Exadata V2??????????????????????? 2010?4?13? ???? ??????????? ? ?????????????????????????? 2010?4?6? ?????·???????·??????? ? T???????????????????????????????????? 2010?3?1? ?????? ????? ?????????????????????????????????????? 2010?2?2? ???? ????????? ? ??????????????Intel???????????????Sun Oracle Database Machine??????? 2010?1?26? ???? ????(????·???) ? ?Oracle Exadata??????????·??????????????????????? 2009?7?14? ?????????? ? ???????????HP Oracle Database Machine????

  Read the article

• Lexmark E240 printing issues

  - by NoamH

  I have Lexmark E240 laser printer. I have been using it with 12.04 (32bit) for 2 years with no significant issues. Since lexmark does not support this printer on linux, I used alternatives drivers that were suggested by the community, such as HP-lasterjet, E238, generic PS, etc. They all worked fine, more or less. After upgrading to 14.04 (64bit fresh install) I tried to configure the printer as before, but now I have problems. The test page is ok, but when printing, most of the times, the first page in the document will be printed very partially and in 300% zoom. Next page might be ok. If I turn off the printer and back on, the first page might be ok, but in the next print job, it will be broken again. I used all the above printer options. Same results. I did NOT install the lexmark drivers since they are intended for 12.04 and the package manager report that it is in "bad quality" (don't know why). Does anyone has any experience with this printer in 14.04 64bit ?

  Read the article

• 14.04 LTS Unity no longer boots after last 94 MB update

  - by Harryg123

  I am running 14.04 LTS, Unity, on an HP Pavillion 15, 4GBRAM, 750 GB hdd, I-5 machine, with AMD 8600M graphics card built in. I have disabled the dash and all Ubuntu spyware. I have been faithfully loading all updates as they appear. This morning it asked for a 94 MB update (bringing kernel to .27, I think. Now, I can boot, get to login screen, but it freezes after that. Keyboard doesn't work at that point, but mouse does. I booted into recovery mode, tried to run in generic graphics mode, -- system again froze. I also pressed [esc] during boot, but saw nothing strange; then text disappeared and was replaced by login screen. I am not a hobbyist; this is a production machine and I have a lot of work to do today. Having a standard software update render my machine completely useless... sigh. Perhaps the simplest thing to do would be to revert to the previous configuration. How do I do that? I can boot into recovery mode. But I have no idea how to proceed. TIA for all help. -Harry

  Read the article

• Help with the RT3290 Wireless adapter

  - by Potek

  I know there is a lot of questions about RT3290 wireless adapter, but I read many many of them and noone helped me with my problem. So, I have the HP Pavilion dm1 laptop and I installed Xubuntu 13.10 on it. During the instalation it poped up that I'm able to connect to the internet via network adapter. I did it obviously, but it worked for like 5 seconds, then it said that network connection is down and I couldn't connect to my router, even if i could actually see network connections avaible. Then (when installation ended) I rebooted my computer. My network was avaible! I could connect and browse the internet smoothly. Next day I turned on my laptop and I saw my wireless connection is no longer avaible, so I plugged laptop to the internet via Ethernet cable and started to explore internet searching solution for my problem. I did this: How do I get a Ralink RT3290 wireless card working? And I was able to connect BUT my kernel started to panic every time I started Mozilla or any program that is connecting to the internet. Every tip i searched was almost the same as the link above. I tried to do this many ways. I even Reinstalled Xubuntu to do everything with clear system but the same thing happened. THEN I installed Linux Mint to check whether it is a major or just Xubuntu problem. Linux Mint responded even worse, because I wasn't even able to use terminal (I clearly messed something up). I would really, really appreciate every help, because I do want to solve this problem and finally be able to use Xubuntu/Ubuntu. I'm waiting for advice from anyone patiently. If anyone wants some details, just tell me which ones.

  Read the article

• Davicom DM9601 USB LAN NIC Ubuntu 11.10 issue

  - by Gaurav_Java

  I have a davicom dm9601 USB ethernet card. When I plug in the device, it is detected and drivers are loaded, but I can't connect to internet using it. It works perfectly on XP, other laptop but not working on Ubuntu 11.10 How can I install the driver for this? I have tried many things But nothing is working. If I go to this link driver but not compiling or may I be doing something wrong. I found this one but don't know how to follow these steps . This is my lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 064e:a103 Suyin Corp. Acer/HP Integrated Webcam [CN0314] Bus 003 Device 002: ID 08ff:1600 AuthenTec, Inc. AES1600 Bus 005 Device 002: ID 0a46:9601 Davicom Semiconductor, Inc. DM9601 Fast Ethernet Adapter Bus 006 Device 002: ID 046d:c045 Logitech, Inc. Optical Mouse Bus 003 Device 003: ID 0a5c:2101 Broadcom Corp. Bluetooth Controller Bus 004 Device 002: ID 04d9:1702 Holtek Semiconductor, Inc. But when I connected my Internet from different system its start working.

  Read the article

• Should ATI catalyst be installed for sake of openCL?

  - by G Sree Teja Simha

  I have a HP Envy 4 1025tx with Hybrid graphics. Although this is a 64bit system, I've installed 32bit Ubuntu on it for some reasons.(Hybrid graphics don't do well with 64bit Ubuntu.-"Some one on some forum") I had heating problems with the GPU but I've fixed them all with vgaswitcheroo. But now I wanted to use my Blender on my Ubuntu. To my surprise Blender didn't detect the dedicated 7670m card in my machine. I've confirmed with cat /sys/kernel/debug/vgaswitcheroo/switch Both IGD and DIS were up and running. I dont seem to have libopencl on my /usr/lib even though my synaptic manager says that I have installed it. I'm not quite sure what I've installed. It says that I've installed "ocl-icd-libopencl1". So my question is... Do I have opencl on my system? If not do I have to get propreitary ATI drivers for sake of opencl(fglrx wrecks up my unity totally on my system I need directions to fix it if this is the choice)? Should I get a 64bit Ubuntu installed on this system?

  Read the article

• Are these company terms good for a programmer or should I move?

  - by o_O

  Here are some of the terms and conditions set forward by my employer. Does these make sense for a job like programming? No freelancing in any way even in your free time outside company work hours (may be okay. May be they wanted their employees to be fully concentrating on their full time job. Also they don't want their employees to do similar work for a competing client. Completely rational in that sense). - So sort of agreed. Any thing you develop like ideas, design, code etc while I'm employed there, makes them the owner of that. Seriously? Don't you think that its bad (for me)? If I'm to develop something in my free time (by cutting down sleep and hard working), outside the company time and resource, is that claim rational? I heard that Steve Wozniak had such a contract while he was working at HP. But that sort of hardware design and also those companies pay well, when compared to the peanuts I get. No other kind of works allowed. Means no open source stuffs. Fully dedicated to being a puppet for the employer, though the working environment is sort of okay. According to my assessment this place would score a 10/12 in Joel's test. So are these terms okay especially considering the fact that I'm underpaid with peanuts?

  Read the article

• Ubuntu won't fit 10" netbook's native display

  - by Daniel

  I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is some bits of the system doesn't fit the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as I can see the Unity Launcher. My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, the desktop area is lowered, with bits of it hidden beneath the screen; & there's a black space left at the top of the screen. I had to revert to the old setting 1024x768 to push the desktop upwards and remove the black space.

  Read the article

• Intel 5100 AGN disconnects and then disables my Verizon FiOS Actiontec router

  - by Anthony

  I am a new user (my first trial) of Ubuntu and booted up my Windows Vista laptop up with the Ubuntu CD. I was able to connect wirelessly to my router and stay connected for about a minute. After that it would disconnect and my router would be disabled: none of my other wireless devices would see the signal any longer, as if it disappeared. I would have to cycle the router's power toggle off/on to get it to come back on and put out a signal again. This happened repeatedly. I experienced no other problems trying the software (i.e., accessed my files w/o issue). I did not attempt to connect with an Ethernet cable. Here are the specs on my system: laptop is HP Pavilion dv5 Notebook PC system type is 64-bit operating system CPU is Intel Core 2 Duo P8600 2.4GHz ram is 4 GB network card is Intel WiFi Link 5100 AGN I read elsewhere in this forum that 64-bit systems may not be compatible with Ubuntu. Can anyone help me with this? I'd really like to be able to use this op system.

  Read the article

• Sound not working after installing PCI video card and then removing it

  - by bakhshu

  I am running 11.10 on a HP/Compaq Presario sr1010z, and the video/audio was working fine with whatever was in the machine already. Then I installed a new video card (PCI/nVidia), which disabled the audio/video on the old one automatically. But that card didn't work out too well so I removed it. Now the video is back to normal, but the audio is gone. I have tried the following: 1. In BIOS, set audio to on/enable rather than Auto 2. Looked for hardware in System Settings Sound, but nothing shows up there 3. But when I run the sysinfo utility, I get the description of the audio controller When I do a 'sudo aplay -l', I get 'aplay: device_list:240: no soundcards found...' And then when I do a 'lspci -v | grep -A7 -i "audio"' I get the following: 00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0) Subsystem: Hewlett-Packard Company Device 2a05 Flags: bus master, medium devsel, latency 32, IRQ 5 I/O ports at a000 [size=256] I/O ports at a400 [size=128] Capabilities: 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) (prog-if 10 [OHCI]) Any ideas on how to fix this? Thanks

  Read the article

• Google suddenly only indexes https and not http

  - by spender

  So all of a sudden, searches for our site "radiotuna" give out the result as an HTTPS link. https://www.google.com/?q=radiotuna#hl=en&safe=off&output=search&sclient=psy-ab&q=radiotuna&oq=radiotuna&gs_l=hp.12...0.0.0.3499.0.0.0.0.0.0.0.0..0.0.les%3B..0.0...1c.LnOvBvgDOBk&pbx=1&bav=on.2,or.r_gc.r_pw.r_qf.&fp=177c7ff705652ec3&biw=1366&bih=602 We only use https for the download of two specific files (these urls are resources used for autoupdate functionality of an app we distribute). All other parts of the site should be served over http. We wouldn't like to see any other traffic over https, nor any of our site links to appear in search engines as https. I'd like to address this issue. It seems that the following solutions are available: hand out an https specific robots.txt as such: User-agent: * Disallow: / and/or at app-level, 301 permanent redirect all requests (except the two above) to HTTP if they come in as HTTPS. My concern with the robots method is that, say (for some reason) google decided not to index http pages, disallowing https pages might mean that google has nothing left to index with disastrous consequences for our ranking. This means I'm inclined to go with a 301 redirect. Any thoughts?

  Read the article

• USB and CD data cannot be read or mounted in 12.10

  - by aravind4j

  I'm using Ubuntu 12.10. I wrote a data disk using Brasero Disk Burner, but the system cannot read the CD. I tried to write the same data into my HP v220w pen drive but now there is an error in that too. It shows the following: Error mounting /dev/sdb at /media/aravind4j/Aravind4j: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb" "/media/aravind4j/Aravind4j"' exited with non-zero exit status 13: $MFTMirr does not match $MFT (record 0). Failed to mount '/dev/sdb': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. (udisks-error-quark, 0) I used a NTFS file system for the pen drive as you can recognize from the above statement. I would like to recover the files so please help me recover the files without formatting the drive.

  Read the article

• Oracle Linux Partner Pavilion Spotlight - Part IV

  - by Ted Davis

  Welcome to the final Oracle Linux Partner Pavilion Spotlight Part IV.  Two days left till the Big Show. You are gearing up. We are gearing up. You can feel the excitement.  We can feel the excitement. This. Will. Be. The. Best. Show. EVER. See you at the Partner Pavilion (Moscone south # 1033) at Oracle OpenWorld. - Oracle Linux / Oracle VM Team HP and Oracle are pleased to announce another Oracle Validated Configuration based on the ProLiant DL980 server. Many choose to deploy Oracle workloads on the ProLiant DL980 based on the cost/performance ratio they achieve running Oracle Linux Unbreakable Enterprise Kernel. You can be confident that Oracle Validated Configurations based on ProLiant servers will help you achieve your most demanding performance goals. QLogic The QLogic-Oracle partnership spans over 20 years resulting in the most comprehensive line of Oracle Linux I/O adapter technology. Interface options include Ethernet, Fibre-Channel, and FCoE. Host side connectivity is offered in both low profile PCIe and Express Module PCIe form factors. QLogic software drives are jointly qualified and “in-box” with Oracle Linux 5.x, 6,x and Oracle VM enabling simplified installation and management while simultaneously taking risk out of the solution. Bringing innovations such as NPIV, T10-PI, and intelligent caching adapter technology to the Oracle Linux environment further strengthens the QLogic advantage. A big thank you to all of our Oracle Linux Partner Pavilion participants. We - they- look forward to meeting you next week at Oracle OpenWorld. If you've missed our three previous Partner Spotlight's - here are the links: Part I, Part II, Part III. 

  Read the article

• Synaptics touchpad problem when disabling it and then enabling it

  - by CYREX

  My girlfriend has an HP dv6000. In ubuntu 10.10 32bit i use the synaptic on it and all is good but when i disable it and enable it the problem starts. when i press the disable button in the synaptics touchpad it disables the mouse AND the keyboard. After enabled the Keyboard keys and Mouse clicks do not work. If i click on the panel below, for example the Applications, Places or System buttons the focus gets stuck there forever. I can open nautilus by clicking on it but i can not use the menus, the ALT+F2 function, see the wireless connections, lower the sound through the panel, etc.. Here comes the weird part. If i press CTRL+ALT+F1 (or any other tty for that matter) and then come back to CTRL+ALT+F7 where the gui is everything works perfect again. This started about a week ago but she told me right now. i checked dmesg which is for sometime now throwing some warnings about Skipping EDID probe do to cached edid but for what i could find out this did not create the problem in the start. NOTE: I do not need to login when i do CTRL+ALT+F1 i just need to change to another tty then come back to F7. What could be causing this problem?

  Read the article

• Bust Out these 13 Spooky Games for Halloween

  - by Jason Fitzpatrick

  Looking for a suitably spooky board game for Halloween? This roundup includes everything from the light-hearted to the dark and challenging. Over at GeekDad they’ve rounded up 13 horror/Halloween themed board games to help you fill your holiday board gaming quota. The list includes classics like the in-depth and atmospheric Arkham Horror to more recent and kid-friendly GeistesBlitz. Although we think their list is rock solid and includes some great titles, we’re disappointed to see that Witch of Salem, a great lighter-weight alternative to Arkham Horror for those nights you want some cooperative H.P. Lovecraft inspired play without the massive setup and game length, didn’t make the list. To check out the full GeekDad list hit up the link below, for more boardgame-centric reading we highly recommend the excellent board gaming site BoardgameGeek. 13 Spooky Board Games for Your Halloween Game Night [GeekDad] What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives? How To Log Into The Desktop, Add a Start Menu, and Disable Hot Corners in Windows 8 HTG Explains: Why You Shouldn’t Use a Task Killer On Android

  Read the article

• wireless card not detected

  - by user281219

  i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

  Read the article

• NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

  - by Big Daddy

  Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

  Read the article

• Laptop runs HOT after 12.10 upgrade!

  - by dinkelk

  I was running 12.04 for 6 months, my laptop ran almost silently and cool enough to hold on my lap. I updated to 12.10 and now my computer gets too hot to hold on my lap and the fan is constantly running on full blast. This is the output of sensors: acpitz-virtual-0 Adapter: Virtual device temp1: +84.0°C (crit = +99.0°C) coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +84.0°C (high = +86.0°C, crit = +100.0°C) Core 0: +74.0°C (high = +86.0°C, crit = +100.0°C) Core 1: +72.0°C (high = +86.0°C, crit = +100.0°C) Core 2: +75.0°C (high = +86.0°C, crit = +100.0°C) Core 3: +84.0°C (high = +86.0°C, crit = +100.0°C) radeon-pci-0100 Adapter: PCI adapter temp1: +76.0°C I have an HP Pavilion dv6, i7, amd radeon graphics. Please let me know if you need additional information. What could be different between the two Ubuntu additions that caused such a drastic change? Edit 1: Per @Paul's suggestion, I ran htop to try to narrow down the problem. Here is the result! This is about 10 minutes after boot-up, htop, yakuake, and a chrome page with 1 tab opened to this question are all that I have manually opened. The most taxing program to the CPU is htop itself. I think that the problem must lie elsewhere; my temps are already up to ~65C for the CPU and ~69C for the GPU, with nearly 0% CPU usage.

  Read the article

• Lubuntu customized cdrom installation crashes

  - by SBarve

  I have created customized live cd of lubuntu and it is customized using uck. After burning the CDROM and using the cdrom for installation of same CD the installation works fine on HP desktop but it fails on Dell desktop. Here is the error. Can someone help to sort out this error. We are sorry; the installer crashed. After you close this window, we will allow you to file a bug report using the integrated bug reporting tool. This will gather information about your system and your installation process. The details will be sent to our bug tracker and a developer will attend to the problem as soon as possible. Traceback (most recent call last): File "/usr/lib/ubiquity/plugins/ubi-timezone.py", line 173, in geoname-cb for result in json.loads (message.response_body.data): File "/usr/lib/python2.7/json/_init_.py", line 326, in loads return_default_decoder.decode(s) File "/usr/lib/python2.7/json/decoder.py", line 366, in decode obj, end=self.raw_decode(S, idx=_w(S,0).end ()) File "/usr/lib/python2.7/json/decoder.py", line 384, in raw_decode raise ValueError ("No JSON object could be decoded") ValueError: No JSON object could be decoded.

  Read the article

• How do I get 1366x768 resolution on 12.04?

  - by Megan

  I am on an HP Envy 14, and the proper resolution that I should be using is 1366x768. This is not an option and I am stuck on 1024x768. I am using Linux 12.04. lspci | grep VGA: 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Madison [Radeon HD 5000M Series] I've tried to add the resolution as a mode in xorg.conf but that does not work. Please any help would be appreciated. I'm new to Linux and just got my dual boot working but this resolution issue is killing me. Edit1 I just tried using the xrandr command: xrandr --newmode "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771 781 798 -hsync +vsync But I get an error: xrandr: Failed to get size of gamma for output default Edit2 lsmod returns the following: Module Size Used by vesafb 13844 1 rfcomm 47604 12 bnep 18281 2 parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 arc4 12529 2 joydev 17693 0 hid_logitech_dj 18594 0 i915 472941 5 uvcvideo 72627 0 usbhid 47199 1 hid_logitech_dj hid 99559 2 hid_logitech_dj,usbhid psmouse 87692 0 iwlwifi 332525 0 mac80211 506816 1 iwlwifi videodev 98259 1 uvcvideo snd_hda_codec_idt 70795 1 mei 41616 0 btusb 18288 2 v4l2_compat_ioctl32 17128 1 videodev hp_accel 25976 0 lis3lv02d 19876 1 hp_accel hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi input_polldev 13896 1 lis3lv02d drm_kms_helper 46978 1 i915 drm 242038 2 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 serio_raw 13211 0 snd_hda_intel 33773 5 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec bluetooth 180104 23 rfcomm,bnep,btusb cfg80211 205544 2 iwlwifi,mac80211 snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec mac_hid 13253 0 snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event fglrx 3263886 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 20 snd_hda_codec_hdmi,snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_ra wmidi,snd_seq,snd_timer,snd_seq_device wmi 19256 1 hp_wmi video 19596 1 i915 intel_ips 18174 0 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62099 0 I have installed ATI/AMD proprietary FGLRX graphics driver. But there is another one called ATI/AMD proprietary FGLRX graphics driver (post-release updates) which I have trouble installing because it gives me an error and tells me to look at some sort of jockey log.

  Read the article

• Running Ubuntu Server from a USB key / thumb drive (being mindful of flash's write limitations)

  - by andybjackson

  Having become disillusioned with hacking Buffalo NAS devices, I've decided to roll my own home server. After some research, I have settled on an HP Proliant Microserver with Ubuntu Server and a ZFS RAID-Z array for data. I settled on this configuration after trying and regretfully rejecting FreeNAS because the Logitech Media Server (LMS) software isn't available on the AMD64 flavour of this platform and because I think Debian/Ubuntu server is a better future-proof platform. I considered Open Media Vault, but concluded that it isn't quite yet ready for my purposes. That said, FreeNAS does include the option to run itself off a 2GB+ flash device like USB key or thumb drive. Apparently FreeNAS is mindful of the write limitations of flash devices and so creates virtual disks for running the OS, writing only the required configuration information back to flash. This would give me an extra data drive slot. Q: Can Ubuntu Server be configured sensibly to run off a flash device such as a USB key/thumb drive? If so, how? The write limitations of flash should be accounted for.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >