Search Results

Search found 2565 results on 103 pages for 'sys'.

Page 83/103 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Setfacl configuration issue in Linux

  - by Balualways

  I am configuring a Linux Server with ACL[Access Control Lists]. It is not allowing me to perform setfacl operation on one of the directoriy /xfiles. I am able to perform the setfacl on other directories as /tmp /op/applocal/. I am getting the error as : root@asifdl01devv # setfacl -m user:eqtrd:rw-,user:feedmgr:r--,user::---,group::r--,mask:rw-,other:--- /xfiles/change1/testfile setfacl: /xfiles/change1/testfile: Operation not supported I have defined my /etc/fstab as /dev/ROOTVG/rootlv / ext3 defaults 1 1 /dev/ROOTVG/varlv /var ext3 defaults 1 2 /dev/ROOTVG/optlv /opt ext3 defaults 1 2 /dev/ROOTVG/crashlv /var/crash ext3 defaults 1 2 /dev/ROOTVG/tmplv /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/ROOTVG/swaplv swap swap defaults 0 0 /dev/APPVG/home /home ext3 defaults 1 2 /dev/APPVG/archives /archives ext3 defaults 1 2 /dev/APPVG/test /test ext3 defaults 1 2 /dev/APPVG/oracle /opt/oracle ext3 defaults 1 2 /dev/APPVG/ifeeds /xfiles ext3 defaults 1 2 I have a solaris server where the vfstab is defined as cat vfstab #device device mount FS fsck mount mount #to mount to fsck point type pass at boot options # fd - /dev/fd fd - no - /proc - /proc proc - no - /dev/vx/dsk/bootdg/swapvol - - swap - no - swap - /tmp tmpfs - yes size=1024m /dev/vx/dsk/bootdg/rootvol /dev/vx/rdsk/bootdg/rootvol / ufs 1 no logging /dev/vx/dsk/bootdg/var /dev/vx/rdsk/bootdg/var /var ufs 1 no logging /dev/vx/dsk/bootdg/home /dev/vx/rdsk/bootdg/home /home ufs 2 yes logging /dev/vx/dsk/APP/test /dev/vx/rdsk/APP/test /test vxfs 3 yes - /dev/vx/dsk/APP/archives /dev/vx/rdsk/APP/archives /archives vxfs 3 yes - /dev/vx/dsk/APP/oracle /dev/vx/rdsk/APP/oracle /opt/oracle vxfs 3 yes - /dev/vx/dsk/APP/xfiles /dev/vx/rdsk/APP/xfiles /xfiles vxfs 3 yes - I am not able to find out the issue. Any help would be appreciated.

  Read the article

• Simulated NAT Traversal on Virtual Box

  - by Sumit Arora

  I have installed virtual box ( with Two virtual Adapters(NAT-type)) - Host (Ubuntu -10.10) - Guest-Opensuse-11.4 . Objective : Trying to simulate all four types of NAT as defined here : https://wiki.asterisk.org/wiki/display/TOP/NAT+Traversal+Testing Simulating the various kinds of NATs can be done using Linux iptables. In these examples, eth0 is the private network and eth1 is the public network. Full-cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source iptables -t nat -A PREROUTING -i eth0 -j DNAT --to-destination Restricted cone iptables -t nat POSTROUTING -o eth1 -p tcp -j SNAT --to-source iptables -t nat POSTROUTING -o eth1 -p udp -j SNAT --to-source iptables -t nat PREROUTING -i eth1 -p tcp -j DNAT --to-destination iptables -t nat PREROUTING -i eth1 -p udp -j DNAT --to-destination iptables -A INPUT -i eth1 -p tcp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p udp -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -i eth1 -p tcp -m state --state NEW -j DROP iptables -A INPUT -i eth1 -p udp -m state --state NEW -j DROP Port-restricted cone iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to-source Symmentric echo "1" /proc/sys/net/ipv4/ip_forward iptables --flush iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE --random iptables -A FORWARD -i eth1 -o eth0 -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT What I did : OpenSuse guest with Two Virtual adapters - eth0 and eth1 -- eth1 with address 10.0.3.15 /eth1:1 as 10.0.3.16 -- eth0 with address 10.0.2.15 now running stund(http://sourceforge.net/projects/stun/) client/server : Server eKimchi@linux-6j9k:~/sw/stun/stund ./server -v -h 10.0.3.15 -a 10.0.3.16 Client eKimchi@linux-6j9k:~/sw/stun/stund ./client -v 10.0.3.15 -i 10.0.2.15 On all Four Cases It is giving same results : test I = 1 test II = 1 test III = 1 test I(2) = 1 is nat = 0 mapped IP same = 1 hairpin = 1 preserver port = 1 Primary: Open Return value is 0x000001 Q-1 :Please let me know If any has ever done, It should behave like NAT as per description but nowhere it working as a NAT. Q-2: How NAT Implemented in Home routers (Usually Port Restricted), but those also pre-configured iptables rules and tuned Linux

  Read the article

• Natting trafic from a tunnel to internet

  - by mezgani

  I'm trying to set up a GRE tunnel between a linux box and a router (LAN), and I'm having a few problems which seem to depend to my iptables configuration. Watching with tcpdump on linux box, I can see packets coming with flags GREv0, all i need right know is forwarding this data to internet, found here some trace : iptables -F iptables -X iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT iptables -t nat -F iptables -t nat -X iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -t nat -P OUTPUT ACCEPT iptables -t mangle -F iptables -t mangle -X iptables -t mangle -P PREROUTING ACCEPT iptables -t mangle -P OUTPUT ACCEPT iptables -A INPUT -p 47 -j ACCEPT iptables -A FORWARD -i ppp0 -o cloud -j ACCEPT iptables -A FORWARD -i cloud -o ppp0 -j ACCEPT iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE echo "1" /proc/sys/net/ipv4/ip_forward cloud Link encap:UNSPEC HWaddr C4-CE-7A-2E-F2-BF-DD-C0-00-00-00-00-00-00-00-00 inet adr:10.3.3.3 P-t-P:10.3.3.3 Masque:255.255.255.255 UP POINTOPOINT RUNNING NOARP MTU:1476 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:124 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:0 (0.0 B) TX bytes:10416 (10.1 KiB) Table de routage IP du noyau Destination Passerelle Genmask Indic MSS Fenêtre irtt Iface 196.206.120.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.3.3.0 0.0.0.0 255.255.255.0 U 0 0 0 cloud 0.0.0.0 196.206.120.1 0.0.0.0 UG 0 0 0 ppp0 root@aldebaran:~# ip route 196.206.120.1 dev ppp0 proto kernel scope link src 196.206.122.46 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.18 10.3.3.0/24 dev cloud scope link default via 196.206.120.1 dev ppp0

  Read the article

• What is the difference between the Linux and Linux LVM partition type?

  - by ujjain

  Fdisk shows multiple partition types. What is the difference between choosing 83) Linux and 8e) Linux LVM? Choosing 83) Linux also works fine for using LVM, even creating a physical volume on /dev/sdb without a partition table works. Does picking a partition type in fdisk really matter? What is the difference in picking Linux or Linux LVM as partition type? [root@tst-01 ~]# fdisk /dev/sdb WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): l 0 Empty 24 NEC DOS 81 Minix / old Lin bf Solaris 1 FAT12 39 Plan 9 82 Linux swap / So c1 DRDOS/sec (FAT- 2 XENIX root 3c PartitionMagic 83 Linux c4 DRDOS/sec (FAT- 3 XENIX usr 40 Venix 80286 84 OS/2 hidden C: c6 DRDOS/sec (FAT- 4 FAT16 <32M 41 PPC PReP Boot 85 Linux extended c7 Syrinx 5 Extended 42 SFS 86 NTFS volume set da Non-FS data 6 FAT16 4d QNX4.x 87 NTFS volume set db CP/M / CTOS / . 7 HPFS/NTFS 4e QNX4.x 2nd part 88 Linux plaintext de Dell Utility 8 AIX 4f QNX4.x 3rd part 8e Linux LVM df BootIt 9 AIX bootable 50 OnTrack DM 93 Amoeba e1 DOS access a OS/2 Boot Manag 51 OnTrack DM6 Aux 94 Amoeba BBT e3 DOS R/O b W95 FAT32 52 CP/M 9f BSD/OS e4 SpeedStor c W95 FAT32 (LBA) 53 OnTrack DM6 Aux a0 IBM Thinkpad hi eb BeOS fs e W95 FAT16 (LBA) 54 OnTrackDM6 a5 FreeBSD ee GPT f W95 Ext'd (LBA) 55 EZ-Drive a6 OpenBSD ef EFI (FAT-12/16/ 10 OPUS 56 Golden Bow a7 NeXTSTEP f0 Linux/PA-RISC b 11 Hidden FAT12 5c Priam Edisk a8 Darwin UFS f1 SpeedStor 12 Compaq diagnost 61 SpeedStor a9 NetBSD f4 SpeedStor 14 Hidden FAT16 <3 63 GNU HURD or Sys ab Darwin boot f2 DOS secondary 16 Hidden FAT16 64 Novell Netware af HFS / HFS+ fb VMware VMFS 17 Hidden HPFS/NTF 65 Novell Netware b7 BSDI fs fc VMware VMKCORE 18 AST SmartSleep 70 DiskSecure Mult b8 BSDI swap fd Linux raid auto 1b Hidden W95 FAT3 75 PC/IX bb Boot Wizard hid fe LANstep 1c Hidden W95 FAT3 80 Old Minix be Solaris boot ff BBT 1e Hidden W95 FAT1 Command (m for help):

  Read the article

• When I restart my LXC environment, the container does not re-bind to the IP address

  - by RoboTamer

  The IP does no longer respond to a remote ping With restart I mean: lxc-stop -n vm3 lxc-start -n vm3 -f /etc/lxc/vm3.conf -d -- /etc/network/interfaces auto lo iface lo inet loopback up route add -net 127.0.0.0 netmask 255.0.0.0 dev lo down route add -net 127.0.0.0 netmask 255.0.0.0 dev lo # device: eth0 auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.22.189.58 netmask 255.255.255.248 gateway 192.22.189.57 broadcast 192.22.189.63 bridge_ports eth0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_stp off post-up ip route add 192.22.189.59 dev br0 post-up ip route add 192.22.189.60 dev br0 post-up ip route add 192.22.189.61 dev br0 post-up ip route add 192.22.189.62 dev br0 -- /etc/lxc/vm3.conf lxc.utsname = vm3 lxc.rootfs = /var/lib/lxc/vm3/rootfs lxc.tty = 4 #lxc.pts = 1024 # pseudo tty instance for strict isolation lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.mtu = 1500 #lxc.cgroup.cpuset.cpus = 0 # security parameter lxc.cgroup.devices.deny = a # Deny all access to devices lxc.cgroup.devices.allow = c 1:3 rwm # dev/null lxc.cgroup.devices.allow = c 1:5 rwm # dev/zero lxc.cgroup.devices.allow = c 5:1 rwm # dev/console lxc.cgroup.devices.allow = c 5:0 rwm # dev/tty lxc.cgroup.devices.allow = c 4:0 rwm # dev/tty0 lxc.cgroup.devices.allow = c 4:1 rwm # dev/tty1 lxc.cgroup.devices.allow = c 4:2 rwm # dev/tty2 lxc.cgroup.devices.allow = c 1:9 rwm # dev/urandon lxc.cgroup.devices.allow = c 1:8 rwm # dev/random lxc.cgroup.devices.allow = c 136:* rwm # dev/pts/* lxc.cgroup.devices.allow = c 5:2 rwm # dev/pts/ptmx lxc.cgroup.devices.allow = c 254:0 rwm # rtc # mounts point lxc.mount.entry=proc /var/lib/lxc/vm3/rootfs/proc proc nodev,noexec,nosuid 0 0 lxc.mount.entry=devpts /var/lib/lxc/vm3/rootfs/dev/pts devpts defaults 0 0 lxc.mount.entry=sysfs /var/lib/lxc/vm3/rootfs/sys sysfs defaults 0 0

  Read the article

• Testing for disk write

  - by Montecristo

  I'm writing an application for storing lots of images (size <5MB) on an ext3 filesystem, this is what I have for now. After some searching here on serverfault I have decided for a structure of directories like this: 000/000/000000001.jpg ... 236/519/236519107.jpg This structure will allow me to save up to 1'000'000'000 images as I'll store a max of 1'000 images in each leaf. I've created it, from a theoretical point of view seems ok to me (though I've no experience on this), but I want to find out what will happen when there will be directories full of files in there. A question about creating this structure: is it better to create it all in one go (takes approx 50 minutes on my pc) or should I create directories as they are needed? From a developer point of view I think the first option is better (no extra waiting time for the user), but from a sysadmin point of view, is this ok? I've thought I could do as if the filesystem is already under the running application, I'll make a script that will save images as fast as it can, monitoring things as follows: how much time does it take for an image to be saved when there is no or little space used? how does this change when the space starts to be used up? how much time does it take for an image to be read from a random leaf? Does this change a lot when there are lots of files? Does launching this command sync; echo 3 | sudo tee /proc/sys/vm/drop_caches has any sense at all? Is this the only thing I have to do to have a clean start if I want to start over again with my tests? Do you have any suggestions or corrections?

  Read the article

• Linux commands shows different results

  - by ClydeFrog

  I'm really having a hard time to process these results on my Ubuntu server. I have a major problem with my JBoss server where I get FileNotFoundExceptions along with "No space left on device" errors. And I thought "maybe I'm out of disk space", and used df command to figure out how much I have left: root@ubuntu1:/# df -h Filsystem Storlek Anvnt Tillg Anv% Monterat på /dev/mapper/ubuntu1-root 36G 13G 21G 38% / none 2,0G 192K 2,0G 1% /dev none 2,0G 0 2,0G 0% /dev/shm none 2,0G 64K 2,0G 1% /var/run none 2,0G 0 2,0G 0% /var/lock /dev/sda1 228M 23M 193M 11% /boot /dev/mapper/vgdata-lvdata 79G 9,2G 66G 13% /data And as you can see, I have plenty of space left. And I also checked if I'm out of i-nodes: root@ubuntu1:/# df -i Filsystem Inoder IAnv IFria IAnv% Monterat på /dev/mapper/ubuntu1-root 2346512 61992 2284520 3% / none 505380 773 504607 1% /dev none 507383 1 507382 1% /dev/shm none 507383 30 507353 1% /var/run none 507383 2 507381 1% /var/lock /dev/sda1 124496 230 124266 1% /boot /dev/mapper/vgdata-lvdata 10486784 233945 10252839 3% /data But then i used du: root@ubuntu1:/# du -s -h /* 7,5M /bin 23M /boot 19G /data 192K /dev 11G /eniro 5,3M /etc 112K /home 0 /initrd.img 183M /lib 0 /lib64 16K /lost+found 12K /media 4,0K /mnt 4,0K /opt du: kan inte komma åt "/proc/20452/task/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/task/20452/fdinfo/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fd/3": Filen eller katalogen finns inte du: kan inte komma åt "/proc/20452/fdinfo/3": Filen eller katalogen finns inte 0 /proc 18M /root 8,2M /sbin 4,0K /selinux 8,0K /srv 0 /sys 40K /tmp 691M /usr 1,2G /var 0 /vmlinuz Notice that /data and /eniro are 30G combined! How is it possible? Do I have a memory leak somewhere? Or is it something else? ----- EDIT 1 ----- Ok, I figured out that /data has its own mount so it's not possible to combine /data and /eniro because they aren't on the same mount. But how come it says 9,2G on the first command when it says 19G on the third on directory /data?

  Read the article

• Google Chrome warning that Javascript is disabled

  - by kirchoffs415

  I hope somebody can help. I keep getting the following message when I log on: Your Javascript is disabled. Limited functionality is available. It will stay for maybe a day sometimes two. I have uninstalled javascript and reinstalled but still the same. I am using chrome. Any help would be grateful many thanks Dominic My system spec is as follows System InformationOS Name Microsoft® Windows Vista™ Home Premium Version 6.0.6002 Service Pack 2 Build 6002 Other OS Description Not Available OS Manufacturer Microsoft Corporation System Name DOM-PC System Manufacturer Dell Inc. System Model Inspiron 1545 System Type X86-based PC Processor Pentium(R) Dual-Core CPU T4200 @ 2.00GHz, 2000 Mhz, 2 Core(s), 2 Logical Processor(s) BIOS Version/Date Dell Inc. A05, 25/02/2009 SMBIOS Version 2.4 Windows Directory C:\Windows System Directory C:\Windows\system32 Boot Device \Device\HarddiskVolume3 Locale United Kingdom Hardware Abstraction Layer Version = "6.0.6002.18005" User Name DOM-PC\DOM Time Zone GMT Standard Time Installed Physical Memory (RAM) 3.00 GB Total Physical Memory 2.96 GB Available Physical Memory 1.38 GB Total Virtual Memory 5.89 GB Available Virtual Memory 4.25 GB Page File Space 3.00 GB Page File C:\pagefile.sys My System Specs

  Read the article

• How to read cell data in excel and output to command prompt

  - by Max Ollerenshaw

  Hi All, I'm a sys admin and I am trying to learn how to use powershell... I have never done any type of scripting or coding before and I have been teaching myself online by learning from the technet script centre and online forums. What I am trying to accomplish is to open an excel spreadsheet get information from it (usernames and password) and then output it into the command prompt in powershell. When ever I try to do this I get an Exception calling "InvokeMember" anyway, here is the code I have so far: function Invoke([object]$m, [string]$method, $parameters) { $m.PSBase.GetType().InvokeMember( $method, [Reflection.BindingFlags]::InvokeMethod, $null, $m, $parameters,$ciUS ) } $ciUS = [System.Globalization.CultureInfo]'en-US' $objExcel = New-Object -comobject Excel.Application $objExcel.Visible = $False $objExcel.DisplayAlerts = $False $objWorkbook = Invoke $objExcel.Workbooks.Open "C:\PS\User Data.xls" Write-Host "Numer of worksheets: " $objWorkbook.Sheets.Count $objWorksheet = $objWorkbook.Worksheets.Item(1) Write-Host "Worksheet: " $objWorksheet.Name $Forename = $objWorksheet.Cells.Item(2,1).Text $Surname = $objWorksheet.Cells.Item(2,2).Text Write-Host "Forename: " $Forename Write-Host "Surname: " $Surname $objExcel.Quit() If (ps excel) { kill -name excel} I have read many different posts on forums and articles on how to try and get around the en-US problem but I cannot seem to get around it and hope that someone here can help! Here is the Exeption problem I mentioned: Exception calling "InvokeMember" with "6" argument(s): "Method 'System.Management.Automation.PSMethod.C:\PS\User Data.x ls' not found." At C:\PS\excel.ps1:3 char:33 + $m.PSBase.GetType().InvokeMember <<<< ( + CategoryInfo : NotSpecified: (:) [], MethodInvocationException + FullyQualifiedErrorId : DotNetMethodException Numer of worksheets: You cannot call a method on a null-valued expression. At C:\PS\excel.ps1:18 char:45 + $objWorksheet = $objWorkbook.Worksheets.Item <<<< (1) + CategoryInfo : InvalidOperation: (Item:String) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull Worksheet: You cannot call a method on a null-valued expression. At C:\PS\excel.ps1:21 char:37 + $Forename = $objWorksheet.Cells.Item <<<< (2,1).Text + CategoryInfo : InvalidOperation: (Item:String) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull You cannot call a method on a null-valued expression. At C:\PS\excel.ps1:22 char:36 + $Surname = $objWorksheet.Cells.Item <<<< (2,2).Text + CategoryInfo : InvalidOperation: (Item:String) [], RuntimeException + FullyQualifiedErrorId : InvokeMethodOnNull Forename: Surname: This is the first question I have ever asked, try to be nice! :)) Many Thanks Max

  Read the article

• ios7 loops on the "trust this computer" dialog

  - by gcb

  trying to transfer files to the work ipad via my debian7 box. When i plug it on the computer usb port, it shows the dialog about trusting this computer, and the computer shows a gnome alert about the ipad being locked and that i should unlock it and try again. i press "trust" on the ipad and try again on gnome. and it starts again. over and over. endlessly. there are dozen threads about this on apple support forums. no solution. just dozens of "me too" flags. e.g. https://discussions.apple.com/message/23082859#23082859 (44 me-too, 2k views) here is the log/messages i get Oct 23 21:17:39 dotmatrix kernel: [ 1928.517766] usb 2-1.7: USB disconnect, device number 16 Oct 23 21:17:39 dotmatrix kernel: [ 1928.715441] usb 2-1.7: new high-speed USB device number 17 using ehci_hcd Oct 23 21:17:40 dotmatrix kernel: [ 1928.811031] usb 2-1.7: New USB device found, idVendor=05ac, idProduct=12ab Oct 23 21:17:40 dotmatrix kernel: [ 1928.811036] usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 23 21:17:40 dotmatrix kernel: [ 1928.811039] usb 2-1.7: Product: iPad Oct 23 21:17:40 dotmatrix kernel: [ 1928.811041] usb 2-1.7: Manufacturer: Apple Inc. Oct 23 21:17:40 dotmatrix kernel: [ 1928.811043] usb 2-1.7: SerialNumber: fec5e0f6a6fa18a936de3c53af661051d290275e Oct 23 21:17:40 dotmatrix mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7" Oct 23 21:17:40 dotmatrix mtp-probe: bus: 2, device: 17 was not an MTP device Oct 23 21:17:43 dotmatrix kernel: [ 1932.346505] usb 2-1.7: USB disconnect, device number 17 If i never press the trust dialog it will stay there until i remove the cable. but the logs shows that it gave up 3sec after the cable was connected.

  Read the article

• uname -a gives wrong version of kernel in gentoo?

  - by freedrull

  Hi I'm running gentoo and doing uname -a gives the wrong kernel version. tony@P_P-o ~ $ uname -a Linux P_P-o 2.6.27-gentoo-r8 #12 SMP PREEMPT Sun Nov 8 19:46:59 PST 2009 i686 Genuine Intel(R) CPU T2060 @ 1.60GHz GenuineIntel GNU/Linux Running eix gentoo-sources shows that I have a later version than that installed: tony@P_P-o ~ $ eix gentoo-sources [U] sys-kernel/gentoo-sources Available versions: (2.6.16-r13) 2.6.16-r13!b!s (2.6.25-r9) 2.6.25-r9!b!s (2.6.26-r4) 2.6.26-r4!b!s (2.6.27-r8) 2.6.27-r8!b!s (2.6.27-r10) 2.6.27-r10!b!s (2.6.28-r5) 2.6.28-r5!b!s (2.6.28-r6) 2.6.28-r6!b!s (2.6.29-r5) 2.6.29-r5!b!s (2.6.29-r6) 2.6.29-r6!b!s (2.6.30) ~2.6.30!b!s (2.6.30-r3) ~2.6.30-r3!b!s (2.6.30-r4) 2.6.30-r4!b!s (2.6.30-r5) 2.6.30-r5!b!s (2.6.30-r6) 2.6.30-r6!b!s (2.6.30-r7) 2.6.30-r7!b!s (2.6.30-r8) 2.6.30-r8!b!s (2.6.31) ~2.6.31!b!s (2.6.31-r1) ~2.6.31-r1!b!s (2.6.31-r2) ~2.6.31-r2!b!s (2.6.31-r3) ~2.6.31-r3!b!s (2.6.31-r4) ~2.6.31-r4!b!s {build symlink ultra1} Installed versions: 2.6.27-r8(2.6.27-r8)!b!s(07:48:25 PM 06/19/2009)(-build -symlink) 2.6.28-r5(2.6.28-r5)!b!s(12:35:17 PM 06/08/2009)(-build -symlink) 2.6.29-r5(2.6.29-r5)!b!s(07:44:33 PM 06/19/2009)(-build -symlink) 2.6.30-r6(2.6.30-r6)!b!s(11:14:45 PM 10/02/2009)(-build -symlink) Homepage: http://dev.gentoo.org/~dsd/genpatches Description: Full sources including the Gentoo patchset for the 2.6 kernel tree What gives?

  Read the article

• vyatta Server Reboots by itself

  - by Fernando

  I have an issue regarding some hardware, maybe you can help me. First, I set up a Supermicro Superserver SYS-5016I-NTF with a Intel Xeon X3470 and 4 GB of Ram with a Hotlava Card Tambora 64G4 with Intel Chipset 82599EB and 4x10G SPF+ ports. Installed Vyatta community edition 6.3. I used it as router making BGP connections with 2 operators. No load at all, temp ranges normal. But the issue is that it reboots by itself in a ramdom way. Not very often, once every few days. But it is unacceptable for production purposes. So I try to test on different hardware, and installed Vyatta community edition 6.3 on a Dell PowerEdge 2950, with Xeon(R) E5345 @ 2.33GHz and 4 GB of Ram. Same Vyatta configuration as Supermicro Server. With same hotlava Card model ( I bought two of them ) Well I have reboots with this equipment as well. Same frecuency as above. I have checked syslog no strange logs until boot process starts to be logged. So it seems server reboot suddenly. I have installed latest driver for the chipset of the Hotlava card. Servers are placed in a datacenter with UPS So finally two things in common in both servers: Hotlava Card. Someone with issues with this card, or the chipset?? Could be it this card?? Vyatta 6.3 community edition. I don't thing is the problem. Is a regular Debian with packages to glue together different services. Or maybe is something I am missing. Andy ideas, suggestions?? Thank you very much... Fernando

  Read the article

• IIS serving pages extremely slowly

  - by mos

  TL;DR: IIS 7 on WS2008R2 serves pages really slowly; everyone assumes it's because it's IIS and we should have gone with an Apache solution on Linux. I have no idea where to start debugging the problem. I work in a nearly all-MS shop with a bunch of fellow programmers who think Linux is the One True Way. Management recently added a Windows machine with IIS to serve Target Process (third-party agile system), but the site runs extremely slowly. Everyone, to a man, assumes it's because it's on IIS, and if only management would grow a brain and get some Linux servers in here, we could really start cleaning things up! ...Right. Everyone "knows" IIS isn't fit to serve .txt files. ...Well, as the only non-Microsoft hater in the bunch, I am apparently the only one who thinks maybe the Linux guy who hated being told to set up the IIS server may have screwed things up. I'd like to go fix it, but I don't have any clue as to where to start as I am not a sys admin. Help?

  Read the article

• Connecting jconsole using SOCKS to Amazon EC2

  - by freshfunk

  I'm trying to use jconsole to view stats on an EC2 instance by using a socks proxy created by SSH. I've tried the various scripts mentioned in the links below but to no avail: http://simplygenius.com/2010/08/jconsole-via-socks-ssh-tunnel.html http://gabrielcain.com/blog/2010/11/02/using-ssh-proxying-to-connect-jconsole-to-remote-cassandra-instances/ I'm running ssh -f -ND 8123 myuser@mymachine and verified that at least Firefox goes through it as a proxy. I then run jconsole -J-DsocksProxyHost=localhost -J-DsocksProxyPort=8123 service:jmx:rmi:///jndi/rmi://ec2-XX-XX-XXX-XXX.compute-1.amazonaws.com:8080/jmxrmi I run netstat -n on my EC2 instance and I see a connection created by my machine. However, the connection eventually disappears and I get a 'channel 2: open failed: connect failed: Operation timed out' from my ssh tunnel. I've opened the jmx port through the security group and I've checked the port on the EC2 instance to make sure it's open (by telnet-ing to it). I'm not sure where to look next. Are there some properties in sshd_config or ssh_config I need to enable for tunneling? Or anything in Mac OS X? I feel like a serious noob but sys administration is really not my strong point. I've spent several hours and can't get this to work.

  Read the article

• DNS Round-robin, Load Balancing, Load sharing, and failover in 2012

  - by user1089770

  I have been reading many posts on serverfault as well as on other sites regarding all these. What I understand is, Multiple A records(round-robin dns) can be used for both : Load sharing (round-robin, but NOT load-balancing). Many people say that “Load Balancing” but I think there will be no load-balancing because “Balance” means (literally) “compare two(or more) and adjust” (and that is what Real s/w or h/w Load balancers do) but Browsers never do this, instead they randomly select and IP and connect to it. It doesn't have any knowledge about the current load of that server (probably, the IP it picked had the highest load!). Automatic failover (latest browsers only). Yes, I think DNS can be used as a simple failover system (at least in 2012, I dont know when it actually "came in effect"). please refer to : http://webmasters.stackexchange.com/questions/10927/using-multiple-a-records-for-my-domain-do-web-browsers-ever-try-more-than-one and Browser-based DNS failover using multiple A records and http://www.nber.org/sys-admin/dns-failover.html I would like to make sure my assumptions/findings are right. So let me know please.....

  Read the article

• What steps to take when CPAN installation fails?

  - by pythonic metaphor

  I have used CPAN to install perl modules on quite a few occasions, but I've been lucky enough to just have it work. Unfortunately, I was trying to install Thread::Pool today and one of the required dependencies, Thread::Converyor::Monitored failed the test: Test Summary Report ------------------- t/Conveyor-Monitored02.t (Wstat: 65280 Tests: 89 Failed: 0) Non-zero exit status: 255 Parse errors: Tests out of sequence. Found (2) but expected (4) Tests out of sequence. Found (4) but expected (5) Tests out of sequence. Found (5) but expected (6) Tests out of sequence. Found (3) but expected (7) Tests out of sequence. Found (6) but expected (8) Displayed the first 5 of 86 TAP syntax errors. Re-run prove with the -p option to see them all. Files=3, Tests=258, 6 wallclock secs ( 0.07 usr 0.03 sys + 4.04 cusr 1.25 csys = 5.39 CPU) Result: FAIL Failed 1/3 test programs. 0/258 subtests failed. make: *** [test_dynamic] Error 255 ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz /usr/bin/make test -- NOT OK //hint// to see the cpan-testers results for installing this module, try: reports ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz Running make install make test had returned bad status, won't install without force Failed during this command: ELIZABETH/Thread-Conveyor-Monitored-0.12.tar.gz: make_test NO What steps do you take to start seeing why an installation failed? I'm not even sure how to begin tracking down what's wrong.

  Read the article

• How to send email from home ip when the email server isn't a designated outbound mail server allocated to BT Retail customers [on hold]

  - by Mr Shoubs

  (I am sys admin!) I can receive email, but when I try to send an email from my home office via our work email server I get the following reply: Your message did not reach some or all of the intended recipients. Subject: Test Sent: 19/08/2014 17:02 The following recipient(s) cannot be reached: 'Joe Blogs' on 19/08/2014 17:02 Server error: '554 5.7.1 Service unavailable; Client host [my-ip-here] blocked using zen.spamhaus.org; http://www.spamhaus.org/query/bl?ip=my-ip-here' I went to that URL and it says the following: Ref: PBL231588 81.152.0.0/13 is listed on the Policy Block List (PBL) Outbound Email Policy of BT Retail for this IP range: It is the policy of BT Retail that unauthenticated email sent from this IP address should be sent out only via the designated outbound mail server allocated to BT Retail customers. Please consult the following URL for details on how to configure your email client appropriately. http://btybb.custhelp.com/cgi-bin/btybb.cfg/php/enduser/cci/bty_adp.php?p_sid=fPnV4zhj&p_faqid=6876 Removal Procedure Removal of IP addresses within this range from the PBL is not allowed by the netblock owner's policy. Going to this URL just says: This site has been disabled for the time being. Does anyone know what I should do to allow me to send emails from my home ip - the site suggests I can configure my email client? (note that I have configured the client to use smtp authentication)

  Read the article

• How to install rmagick on Ubuntu 10.04?

  - by Andrew

  Here's what I've done so far: sudo apt-get install imagemagick libmagickcore-dev This did not throw any errors, so I think that ImageMagick is installed fine. Then I tried installing the gem: sudo gem install rmagick This resulted in the following error: ERROR: Error installing rmagick: ERROR: Failed to build gem native extension. /usr/bin/ruby1.8 extconf.rb checking for Ruby version >= 1.8.5... yes checking for gcc... yes checking for Magick-config... yes checking for ImageMagick version >= 6.4.9... yes checking for HDRI disabled version of ImageMagick... yes checking for stdint.h... yes checking for sys/types.h... yes checking for wand/MagickWand.h... no Can't install RMagick 2.13.1. Can't find MagickWand.h. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Provided configuration options: --with-opt-dir --without-opt-dir --with-opt-include --without-opt-include=${opt-dir}/include --with-opt-lib --without-opt-lib=${opt-dir}/lib --with-make-prog --without-make-prog --srcdir=. --curdir --ruby=/usr/bin/ruby1.8 Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1 for inspection. Results logged to /usr/lib/ruby/gems/1.8/gems/rmagick-2.13.1/ext/RMagick/gem_make.out What do I need to do to install rmagick on Ubuntu 10.04?

  Read the article

• Determining the Source of a Given File System Mount on Unix [migrated]

  - by phobos51594

  Background Recently I have run into a bit of a snag on my home FreeBSD server. I recently upgraded it to the latest stable release, and I have noticed some strange behavior with the /var partition. Originally, I had the system configured such that /var had its own partition with /var/run and /var/log in memory disks (/tmp, too). After the upgrade, I notice there is a new, fourth memory disk mounting directly to /var that I had not set up manually and is not in my fstab. It is only 28 megs or so in size and is causing problems when trying to update my ports collection. The ramdisk mounts atuomagically at boot and cannot be unmounted while in multi-user mode. If I drop to single user mode, I am able to unmount it without issue, however rebooting causes it to pop right back up. System specifications have been included at the end of the post. Question Is there any way to determine exactly what is mounting a given memory disk (or any filesystem, for that matter) after it has been mounted? Alternately, does anybody have any ideas what might have caused the new /var ramdisk to pop up? System Specification # uname -a FreeBSD sarge 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: Thu Nov 22 14:02:13 PST 2012 donut@sarge:/usr/obj/usr/src/sys/GENERIC i386 # df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 515612 410728 63636 87% / devfs 1 1 0 100% /dev /dev/da0s1d 515612 287616 186748 61% /var /dev/da0s1e 6667808 2292824 3841560 37% /usr /dev/md0 63004 32 57932 0% /tmp /dev/md1 3484 8 3200 0% /var/run /dev/md2 31260 8 28752 0% /var/log /dev/md3 31260 512 28248 2% /var <-- This # cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/da0s1a / ufs rw,noatime 1 1 /dev/da0s1d /var ufs rw,noatime 2 2 /dev/da0s1e /usr ufs rw,noatime 2 2 md /tmp mfs rw,-s64M,noatime 0 0 md /var/run mfs rw,-s4M,noatime 0 0 md /var/log mfs rw,-s32M,noatime 0 0 Thank you in advance for any assistance.

  Read the article

• IIS / Virtual Directory authentication.

  - by Chris L

  I have an IIS(v6)/Windows 2003/.Net 3.5(app code, libraries etc.) server hosting a website at www.mywebsite.com mapped to E:\Inetpub\wwwroot\mywebsite, we also have a virtual directory (VirtDir) mapped out to E:\Inetpub\wwwroot\mywebsite\files (although in theory this could be in a different directory or a separate machine) where we store a customer's files(a bunch of .pdf & .xls). Currently to access a file you can enter into the url something like: www.mywebsite.com/VirtDir/Customer/myFile.pdf and get access to the file. The problem is the user doesn't have to log into www.mywebsite.com to get access to the file, we would prefer them to log in first. We would like the user to login via the mywebsite and if valid, let them download files from the virtual directory. The www.mywebsite.com and VirtDir are separate sites on the same farm. Allow Anon Access, and Integrated Windows Authentication both enabled. I'm more of a developer and less of a Sys Admin, but hopefully I'm in the right spot, any help would be appreciated.

  Read the article

• Intermittent Trouble Entering Hibernate on WinXP

  - by kquinn

  My personal desktop, running 32-bit Windows XP SP2 (with 4GB RAM, 2.75GB addressable, swap disabled, hiberfil.sys existing and contiguous on C:\; SP3 is not installed because SP2 has been working fine and I do not want to re-qualify with SP3 just for sheer perversity) typically gets hibernated at night. For a long time this worked great, but recently the machine has had trouble entering hibernation. Sometimes when I press my power button (configured to hibernate), the box will start the procedure for hibernating (i.e., go to the blue "Windows XP" background logo and display a message about entering hibernation), but before displaying the usual blue-on-black hibernation progress bar it will drop back to the desktop. No error messages appear, on screen or in the system log. The only record of unsuccessful hibernation attempts in the system log, which proudly proclaims that "The Windows Image Acquisition (WIA) service entered the running state." once per failed hibernation attempt. The problem is almost certainly resource related: if I then close one or more applications which are running, and repeat the exact same process, the machine will hibernate perfectly. There does not appear to be a reliable high-water mark for virtual or physical memory use, below which the machine is guaranteed to hibernate; it's different every time (though typically, below about 1.1–1.4 GB memory usage seems to be where hibernate succeeds most often). Memory may not even be the relevant resource; as far as I know, it could also be handles or sockets. This behavior is relatively recent: it has only started in the last few months; before then, I could hibernate reliably no matter what the current resource use of the system. This machine claims to have hotfix Q909095 installed, but since the symptoms of my problem match KB909095 rather well, I'm suspicious if this fix is actually working as intended. Any ideas on how to fix this or where to start debugging?

  Read the article

• Diagnosing Logon Audit Failure event log entries

  - by Scott Mitchell

  I help a client manage a website that is run on a dedicated web server at a hosting company. Recently, we noticed that over the last two weeks there have been tens of thousands of Audit Failure entries in the Security Event Log with Task Category of Logon - these have been coming in about every two seconds, but interesting stopped altogether as of two days ago. In general, the event description looks like the following: An account failed to log on. Subject: Security ID: SYSTEM Account Name: ...The Hosting Account... Account Domain: ...The Domain... Logon ID: 0x3e7 Logon Type: 10 Account For Which Logon Failed: Security ID: NULL SID Account Name: david Account Domain: ...The Domain... Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x154c Caller Process Name: C:\Windows\System32\winlogon.exe Network Information: Workstation Name: ...The Domain... Source Network Address: 173.231.24.18 Source Port: 1605 The value in the Account Name field differs. Above you see "david" but there are ones with "john", "console", "sys", and even ones like "support83423" and whatnot. The Logon Type field indicates that the logon attempt was a remote interactive attempt via Terminal Services or Remote Desktop. My presumption is that these are some brute force attacks attempting to guess username/password combinations in order to log into our dedicated server. Are these presumptions correct? Are these types of attacks pretty common? Is there a way to help stop these types of attacks? We need to be able to access the desktop via Remote Desktop so simply turning off that service is not feasible. Thanks

  Read the article

• Amazon EC2 Nat Instance - goes out but not back in

  - by nocode

  I've followed Amazon's steps and list what I've done. I've created 6 subnets (4 private SN1: 10.50.1.0/24, SN2: 10.50.2.0/24, SN3: 10.50.3.0/24, SN4: 10.50.4.0/24) and 2 public (SN5: 10.50.101.0/24 and SN6: 10.50.102.0/24) -I have a Bastion host and a NAT instance on SN5 and assigned EIP's to both. I created a test instance on SN1. edit: -NAT instance has source/destination check disabled -On the NAT instance, I had enabled the following commands to be bootstrapped: echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A POSTROUTING -s 10.0.0.0/16 -j MASQUERADE -In my VPC, the private subnets have their own route table and configured 0.0.0.0/0 to the NAT instance with 4 subnets being associated with the route table. I have a second route table for my public subnets and 0.0.0.0/16 is pointed towards the IGW (with the other 2 subnets associated with it). -For Security Groups, I have the NAT instance accepting all traffic on each of the 4 subnets and all OUTBOUND traffic is allowed. For my test server, I have allowed all outbound access and have allowed all traffic from the public subnet of the NAT host. I can ping internally with no issues. On my test instance, if I try to ping google.com, DNS resolves however I don't get a reply back. On my NAT instance, I run a tcpdump and can see the request being requested to google.com but it's not sending the reply back. My NAT host can ping and receive a reply from google. From the test host, when I ping the NAT instance, the tcpdump shows a request and receive. Is there something I'm missing? EDIT: I've figured it out - I had to save the iptable config and restart the service.

  Read the article

• Should tripwire be entering /proc?

  - by dsadinoff

  When initializing the db with tripwire --init it spat out a bunch of errors pertaining to /proc: ### Warning: File system error. ### Filename: /proc/16982/fd/4 ### No such file or directory ### Continuing... ### Warning: File system error. ### Filename: /proc/16982/fdinfo/4 ### No such file or directory ### Continuing... ### Warning: File system error. ### Filename: /proc/16982/task/16982/fd/4 ### No such file or directory ### Continuing... ### Warning: File system error. ### Filename: /proc/16982/task/16982/fdinfo/4 ### No such file or directory ### Continuing... ### Warning: Duplicate object encountered. ### /proc/sys/net/ipv6/neigh This feels like noise. The twpol.txt file has the following clause: # # Critical devices # ( rulename = "Devices & Kernel information", severity = $(SIG_HI), ) { /dev -> $(Device) ; /proc -> $(Device) ; } Which, if I understand it right, is going to cause tripwire to care deeply about the entire contents of /proc. Shouldn't it just care about the static parts of /proc like the drivers and such, and not the per-pid stuff? Why does it ship like this?

  Read the article

• memory tuning with rails/unicorn running on ubuntu

  - by user970193

  I am running unicorn on Ubuntu 11, Rails 3.0, and Ruby 1.8.7. It is an 8 core ec2 box, and I am running 15 workers. CPU never seems to get pinned, and I seem to be handling requests pretty nicely. My question concerns memory usage, and what concerns I should have with what I am seeing. (if any) Here is the scenario: Under constant load (about 15 reqs/sec coming in from nginx), over the course of an hour, each server in the 3 server cluster loses about 100MB / hour. This is a linear slope for about 6 hours, then it appears to level out, but still maybe appear to lose about 10MB/hour. If I drop my page caches using the linux command echo 1 /proc/sys/vm/drop_caches, the available free memory shoots back up to what it was when I started the unicorns, and the memory loss pattern begins again over the hours. Before: total used free shared buffers cached Mem: 7130244 5005376 2124868 0 113628 422856 -/+ buffers/cache: 4468892 2661352 Swap: 33554428 0 33554428 After: total used free shared buffers cached Mem: 7130244 4467144 2663100 0 228 11172 -/+ buffers/cache: 4455744 2674500 Swap: 33554428 0 33554428 My Ruby code does use memoizations and I'm assuming Ruby/Rails/Unicorn is keeping its own caches... what I'm wondering is should I be worried about this behaviour? FWIW, my Unicorn config: worker_processes 15 listen "#{CAPISTRANO_ROOT}/shared/pids/unicorn_socket", :backlog = 1024 listen 8080, :tcp_nopush = true timeout 180 pid "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid" GC.respond_to?(:copy_on_write_friendly=) and GC.copy_on_write_friendly = true before_fork do |server, worker| STDERR.puts "XXXXXXXXXXXXXXXXXXX BEFORE FORK" print_gemfile_location defined?(ActiveRecord::Base) and ActiveRecord::Base.connection.disconnect! defined?(Resque) and Resque.redis.client.disconnect old_pid = "#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.oldbin" if File.exists?(old_pid) && server.pid != old_pid begin Process.kill("QUIT", File.read(old_pid).to_i) rescue Errno::ENOENT, Errno::ESRCH # already killed end end File.open("#{CAPISTRANO_ROOT}/shared/pids/unicorn.pid.ok", "w"){|f| f.print($$.to_s)} end after_fork do |server, worker| defined?(ActiveRecord::Base) and ActiveRecord::Base.establish_connection defined?(Resque) and Resque.redis.client.connect end Is there a need to experiment enforcing more stringent garbage collection using OobGC (http://unicorn.bogomips.org/Unicorn/OobGC.html)? Or is this just normal behaviour, and when/as the system needs more memory, it will empty the caches by itself, without me manually running that cache command? Basically, is this normal, expected behaviour? tia

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >