Search Results

Search found 27143 results on 1086 pages for 'include path'.

Page 835/1086 | < Previous Page | 831 832 833 834 835 836 837 838 839 840 841 842  | Next Page >

• Programmer configuring a new network

  - by David Lively

  I'm in the process of expanding my home network from a couple of laptops on a wireless Verizon FiOS router to include: Linksys 24-port switch Cisco Pix 515 Cisco 3640 router One new development desktop and three new machines to act as a db server, web server and a backup system. My company is moving offices and we've decommissioned some older hardware, which I was able to pick up for the cost of the labor to move it home from the office. The benefits to working with dedicated web and db servers are very valuable to me. I know very little about network topology, other than that everything plugs into the switch, which then plugs into the cheap Verizon router. (Verizon provides a coax connection that the router must translate into Ethernet before I can use it with any of this equipment). Questions: What is the recommended topology for this equipment? Verizon router - Pix - 3600 - switch? Is the 3600 even necessary or desirable? The Verizon router has one WAN port and 4 client ports, all 10/100. Is there any performance benefit at all to wiring multiple connections from the verizon router to the switch, assuming I don't use the Pix? Should I use the Pix? Software firewalls are a pain, and seem silly if I have a device like this lying around. Anything else I should know? Am I wasting my time with this? I also obtained a 7 foot rack, shelves, patch panels, UPS, patch panels, etc, which are going into a conveniently air conditioned closet. All constructive advice appreciated.

  Read the article

• Should I use Evernote or Org-mode for taking notes?

  - by tobeannounced

  I am looking for an app that will help me manage my notes, and after coming across Org-mode, I was wondering whether Org-mode's functionality is strong enough that it can remove the need for me to use another note taking app (because org is more of a task management app), such as Evernote. My wishes for a note taking app are: can be accessed offline in some form, eg through an iPhone app or desktop client Org-Mode and Evernote can both do this, however it seems like MobileOrg is more aimed at tasks, rather than notes? If this is the case, I probably would use Evernote in addition to MobileOrg. I can clip web content into easily for research Evernote has the browser extension, how is it with Org-Mode? I know I can use c-c c-l, but how suited is it really for taking notes on stuff I am browsing in Chrome/Firefox? has voice notes on the iPhone and computer too, if possible Org-Mode cannot do this on the iPhone, on the computer could I record audio externally and then link the files in? I can add notes too on my iPhone & computer while not connected to the internet both can do this. The types of notes I am likely to have include: howtos/things I have learnt, documentation on my setup/stuff, research on things I may do in the future, ideas, and task specific notes. I have thought about where I would want to access each of these notes and will post that here if you think it would help. So, is Org-mode strong enough in note-taking and the requirements I listed that I can avoid the need to use a separate tool for taking notes?

  Read the article

• Email encoding on IIS7

  - by Ivanhoe123

  All emails sent from the server are displaying Cyrillic letters as weird characters, for example: Можно. Regular alphabet letters are properly rendered. I searched all across the web but was not able to find any solutions. Here is some information about the system: Dedicated server with Windows 2008 and IIS7 Application are in PHP (run as FastCGI) If of any importance, Smartermail is installed on the server The emails are sent using PHPs mail() function through a Drupal website. Encoding on that site is set up properly and there are no display issues on front end. Where is the problem? How can I make Cyrillic letters to be properly encoded? Any help is greatly appreciated. Thanks! UPDATE Here are the email headers: Received: from SERVERNAME (mail.domain.com [12.123.123.123]) by mail.domain.com with SMTP; Fri, 16 Nov 2012 00:00:00 +0100 From: [email protected] To: [email protected] Subject: Email subject Date: Fri, 16 Nov 2012 00:00:00 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: quoted-printable X-Mailer: Drupal Sender: [email protected] Return-Path: [email protected] Message-ID: f98b801988c642ef911ef46f7cace92b@com X-SmarterMail-Spam: SPF_None, ISpamAssassin 8 [raw: 5], DK_None, DKIM_None, Custom Rules [] X-SmarterMail-TotalSpamWeight: 8

  Read the article

• Pre-startup segmentation fault with ptrace

  - by sfink

  I have somehow managed to mangle my computer so that any time I attempt to use something that uses ptrace to trace another process (eg strace, gdb), I get an immediate segmentation fault. For example: # strace /bin/true execve("/bin/true", ["/bin/true"], [/* 27 vars */]) = 0 --- SIGSEGV (Segmentation fault) @ 0 (0) --- +++ killed by SIGSEGV +++ or with gdb: # gdb /bin/true GNU gdb Fedora (6.8-27.el5) Copyright (C) 2008 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu"... (no debugging symbols found) (gdb) run Starting program: /bin/true Program terminated with signal SIGSEGV, Segmentation fault. The program no longer exists. You can't do that without a process to debug. rpm -V comes up clean on strace, gdb, and glibc. I do not have any LD_* variables set, and PATH has nothing special in it.

  Read the article

• How do I create a "here document" within a shell function?

  - by BenU

  I'm working my way through William Shotts Jr.'s great The Linux Command Line on my Mac OSX 10.7.5 system. 90% of the linux that Shotts covers is close enough to Darwin that I can figure out or GTEM to figure out what's going on. I've made it to chapter 27 on "Writing Shell Scripts" and am getting hung up creating "here files" within a function. I get an syntax error: unexpected end of file error when I include the following function: report_uptime () { cat <<- _EOF_ <H2>System Uptime</H2> <PRE>$(uptime)</PRE> _EOF_ return } The error goes away if I use the following function placeholder: report_uptime () { return } Also, elsewhere in the script, outside of a function I use the cat << _EOF_ format to create a "here file" with no trouble: cat << _EOF_ <HTML> <HEAD> <TITLE>$TITLE</TITLE> </HEAD> <BODY> <H1>$TITLE</H1> <P>$TIME_STAMP</P> $(report_uptime) $(report_disk_space) $(report_home_space) </BODY> </HTML> _EOF_ If anyone has any idea what I'm doing wrong I would be grateful!

  Read the article

• Understanding Exchange User Monitor (ExMon) Output

  - by SturdyErde

  I recently downloaded and ran ExMon while trying to troubleshoot Outlook connectivity problems due to high CPU usage on Exchange Server 2010 SP2 UR8. The tool provides a great set of data, but I have not yet figured out how to make great use of it. My first question is why the Exchange Server itself shows up as a high-use MAPI client in the ExMon data. Among the users' client versions I see build numbers listed for Outlook 2013, 2010, and yes, even 2007 clients. I also see build number 14.2.387.0, which represents Exchange Server 2010 SP2 Update Rollup 8 (+/- some other patch that makes it not quite match the UR8 number). There are many user rows that list only "::1" and/or the short hostname of my Exchange server in the 'Client IP Addresses' column. Some other columns include the end-user's actual IP address and the Exchange server's IP address. ExMon shows that it is actually Exchange Server that is utilizing the highest percentage of CPU that is used for MAPI calls. I had expected to see 1 IP address and version number for each user reported by ExMon. Instead, most records show multiple version #'s (Exchange ver and Outlook ver) and multiple IPs (Exchange IP and client IP). Can anyone explain the reason for this to me, please?

  Read the article

• Exclamation 403 forbidden for cgi-bin/ and cannot protect site with password

  - by gasgdasdgasdg

  First problem i have is i am getting 403 forbidden error for cgi-bin/ I have created a new /var/www2/ i can access it fine. php runs fine. Second problem is I cannot password protect it. i first tried doing htpasswd, it asks for login but everytime i login it keeps asking for new one. its getting frustrating, i have tried all tricks. and doesn't seem to work. this is a virtual host config inside sites-available. httpd.conf is empty but i have apache2.conf Code: NameVirtualHost 12.12.12.12. <VirtualHost 12.12.12.12> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /var/www2/cgi-bin/ <Directory "/var/www2/cgi-bin/"> AllowOverride Options Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch AddHandler cgi-script cgi pl Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost>

  Read the article

• nginx error page and internal directives not working as expected

  - by Romain

  I'd like to setup my nginx server to return a specific error page on HTTP 50x status codes, and I'd like this page to be unavailable by a direct request from users (e.g., http//mysite/internalerror). For that, I'm using nginx's internal directive, but I must be missing something, as when I put that directive on my /internalerror location, nginx returns a custom 404 error (which isn't even my own 404 error page) when a page crashes. So, to summarize, here's what seems to happen: GET /Home nginx passes the query to Python I'm simulating an application bug to get the 502 error code nginx tries to return /InternalError from its error_page rule because of the internal rule, it finally fails back to a custom 404 error code <-- why? the documentation says error_page directives are not concerned by internal: http://wiki.nginx.org/HttpCoreModule#internal Here's an extract from nginx.conf with a few comments to point things out: error_page 404 /NotFound; error_page 500 502 503 504 =500 /InternalError; # HTTP 500 Error page declaration location / { try_files /Maintenance.html $uri @pythonbackend; } location @pythonbackend { include uwsgi_params; uwsgi_pass unix:///tmp/uwsgi.sock; } location ~* \.(py|pyc)$ { # This internal location works OK and returns my own 404 error page internal; } location /__Maintenance.html { # This one also works fine internal; } location ~* /internalerror { # This one doesn't work and returns nginx's 404 error page when I trigger an error somewhere on my site internal; } Thanks very much for your help!!

  Read the article

• Wrong CSS mime type with Roundcube 0.5 beta and nginx

  - by Julien Vehent

  I'm running into a CSS problem. This is a setup based on Debian Squeeze (nginx/0.7.67, php5/cgi) on which I installed the latest Roundcube 0.5 beta. PHP is properly processed, login works fine but the CSS files are not loaded and Firefox is throwing the following errors: Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/common.css?s=1290600165 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 Error: The stylesheet https://webmail.example.net:10443/roundcube/skins/default/mail.css?s=1290156319 was not loaded because its MIME type, "text/html", is not "text/css". Source File: https://webmail.example.net:10443/roundcube/?_task=login Line: 0 As far as I understand, nginx doesn't see the .css extension (because ofthe ?s= argument) and thus set the mime type with the default value, being text/html. Should I fix this in nginx (and how ?) or is it roundcube's related ? Edit: It seems that it's nginx related. The content-type isn't set for any other type than text/html. I had to include manually the following declarations to force CSS and JS content-types. That's ugly, and I never had the problem before... any idea ? location ~ \.css { add_header Content-Type text/css; } location ~ \.js { add_header Content-Type application/x-javascript; }

  Read the article

• Recovering data from mangodb raw files

  - by Jin Chen

  we use mongodb for our database and set the replset(two servers), but we mistakenly deleted some raw files that under /path/to/dbdata on both servers, after we used tool to get back the deleted files(we ran the extundelete on both server and mix the result together), like database.1, database.2 etc. we could not start the mongod, it raised the following error when starting mongod or executing mongodump, here is the console output: root@mongod:/opt/mongodb# mongodump --repair --dbpath /opt/mongodb -d database_production Thu Aug 21 16:22:43.258 [tools] warning: repair is a work in progress Thu Aug 21 16:22:43.258 [tools] going to try and recover data from: database_production Thu Aug 21 16:22:43.262 [tools] Assertion failure isOk() src/mongo/db/pdfile.h 392 0xde1b01 0xda42fd 0x8ae325 0x8ac492 0x8bd8e0 0x8c1c51 0x80e345 0x80e607 0x80e6a4 0x6db92a 0x6dc1ff 0x6e0db9 0xd9e45e 0x6ccdc7 0x7f499d856ead 0x6ccc29 mongodump(_ZN5mongo15printStackTraceERSo+0x21) [0xde1b01] mongodump(_ZN5mongo12verifyFailedEPKcS1_j+0xfd) [0xda42fd] mongodump(_ZNK5mongo7Forward4nextERKNS_7DiskLocE+0x1a5) [0x8ae325] mongodump(_ZN5mongo11BasicCursor7advanceEv+0x82) [0x8ac492] mongodump(_ZN5mongo8Database19clearTmpCollectionsEv+0x160) [0x8bd8e0] mongodump(_ZN5mongo14DatabaseHolder11getOrCreateERKSsS2_Rb+0x7b1) [0x8c1c51] mongodump(_ZN5mongo6Client7Context11_finishInitEv+0x65) [0x80e345] mongodump(_ZN5mongo6Client7ContextC1ERKSsS3_b+0x87) [0x80e607] mongodump(ZN5mongo6Client12WriteContextC1ERKSsS3+0x54) [0x80e6a4] mongodump(_ZN4Dump7_repairESs+0x3a) [0x6db92a] mongodump(_ZN4Dump6repairEv+0x2df) [0x6dc1ff] mongodump(_ZN4Dump3runEv+0x1b9) [0x6e0db9] mongodump(_ZN5mongo4Tool4mainEiPPc+0x13de) [0xd9e45e] mongodump(main+0x37) [0x6ccdc7] /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f499d856ead] mongodump(__gxx_personality_v0+0x471) [0x6ccc29] assertion: 0 assertion src/mongo/db/pdfile.h:392 Thu Aug 21 16:22:43.271 dbexit: Thu Aug 21 16:22:43.271 [tools] shutdown: going to close listening sockets... Thu Aug 21 16:22:43.271 [tools] shutdown: going to flush diaglog... Thu Aug 21 16:22:43.271 [tools] shutdown: going to close sockets... Thu Aug 21 16:22:43.272 [tools] shutdown: waiting for fs preallocator... Thu Aug 21 16:22:43.272 [tools] shutdown: closing all files... Thu Aug 21 16:22:43.273 [tools] closeAllFiles() finished Thu Aug 21 16:22:43.273 [tools] shutdown: removing fs lock... Thu Aug 21 16:22:43.273 dbexit: really exiting now my env: 1) Debian 3.2.35-2 x86_64(it's a XEN virtual machine) 2) mongodb 2.4.6 and we did not delete the .0 and .ns files we tried to create a new database with the same name and copy these db.ns and db.2, db.3 to the new db, we still met the same error. is there any way to check the valid of raw .ns and datafiles, and how to recover the database?

  Read the article

• How do I hook into Tar with BASH?

  - by orb

  Long Story Short I am working with Tar archives that contain PNG images in base64 encoding. I would like to use BASH (or whatever else works) to hook into the extraction function of Tar to decode PNG images from base64 encoding to standard PNG encoding after the files are unpacked. A simple cat $input-file | base64 -d >$output-file will successfully decode the images. Is there a way I can hook into tar -xf so that users do not have to do any (or minimal) extra work to decode the images? In the GNU Tar documentation (http://www.gnu.org/software/tar/manual/html_chapter/Backups.html#SEC97) I found that there are in fact variables reserved to hold the names of functions I desire to be hooked into various moments in Tar program execution. However, the documentation explains that these variables, along with other variables that can be set to configure Tar, are located in a file named backup-specs. Unfortunately, the path to this file is not given. Further, running sudo find / -name backup-specs tells me that this file is not present on my Ubuntu version 13.04 system. Background Information not included in the Long Story Short I have been working on a browser-based (WebGL) particle effect creation application (http://www.particleeffect.org), (https://github.com/cgrabowski/webgl-particle-effect-editor), (https://github.com/cgrabowski/webgl-particle-effect). I have began to write a client-side-only solution for saving and loading effect data as a tar archive. However, since client-side JavaScript has limited capability to process binary data, the images used as textures in the effect are saved with base64 encoding. I have been able to implement saving effect data as a Tar archive (haven't pushed that to Github yet). However, the images present in said Tar archive cannot be manipulated unless they are decoded from base64 encoding.

  Read the article

• SMTP error goes directly to Badmail directory after Queue

  - by Sergio López

  This is the error I got in the .BDR Unable to deliver this message because the follow error was encountered: "This message is a delivery status notification that cannot be delivered.". The specific error code was 0xC00402C7. The message sender was <. The message was intended for the following recipients. [email protected] This is the .bad file I got in the badmail error, Can anyone help me ? I´m getting this error from every mail I try to deliver from several php apps and other apps, the relay is only for 2 ip adresses 127.0.0.1 and the server ip, I telnet the smtp and it seems to work fine the mail go to the queue folder... Im stucked From: postmaster@ALRSERVER02 To: [email protected] Date: Mon, 22 Aug 2011 18:39:38 -0500 MIME-Version: 1.0 Content-Type: multipart/report; report-type=delivery-status; boundary="9B095B5ADSN=_01CC61236DC6DEED00000001ALRSERVER02" X-DSNContext: 7ce717b1 - 1378 - 00000002 - C00402CF Message-ID: Subject: Delivery Status Notification (Failure) This is a MIME-formatted message. Portions of this message may be unreadable without a MIME-capable mail program. --9B095B5ADSN=_01CC61236DC6DEED00000001ALRSERVER02 Content-Type: text/plain; charset=unicode-1-1-utf-7 This is an automatically generated Delivery Status Notification. Delivery to the following recipients failed. [email protected] --9B095B5ADSN=_01CC61236DC6DEED00000001ALRSERVER02 Content-Type: message/delivery-status Reporting-MTA: dns;ALRSERVER02 Received-From-MTA: dns;ALRSERVER02 Arrival-Date: Mon, 22 Aug 2011 18:39:38 -0500 Final-Recipient: rfc822;[email protected] Action: failed Status: 5.3.5 --9B095B5ADSN=_01CC61236DC6DEED00000001ALRSERVER02 Content-Type: message/rfc822 Received: from ALRSERVER02 ([74.3.161.94]) by ALRSERVER02 with Microsoft SMTPSVC(7.0.6002.18264); Mon, 22 Aug 2011 18:39:38 -0500 Subject: =?utf-8?Q?[MantisBT]_Reinicializaci=C3=B3n_de_Contrase=C3=B1a?= To: [email protected] X-PHP-Originating-Script: 0:class.phpmailer.php Date: Mon, 22 Aug 2011 17:39:38 -0600 Return-Path: [email protected] From: Alr Tracker Message-ID: X-Priority: 3 X-Mailer: PHPMailer 5.1 (phpmailer.sourceforge.net) MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="utf-8" X-OriginalArrivalTime: 22 Aug 2011 23:39:38.0020 (UTC) FILETIME=[C182E640:01CC6124] Si solicitó este cambio, visite la siguiente URL para cambiar su contraseña: Usuario: slopez Dirección IP remota: 189.191.159.86 NO RESPONDA A ESTE MENSAJE --9B095B5ADSN=_01CC61236DC6DEED00000001ALRSERVER02--

  Read the article

• SELinux blocking Samba directory listing

  - by Sean M

  I am running Samba on a CentOS server, and I am experiencing a problem where it allows me to connect to the server and see a share, but shows the share as an empty directory. I find this behavior strange. Here is the stanza in my smb.conf for the given share: [seanm] path = /home/seanm writeable = yes valid users = seanm, root read only = No Here's what I see on the server side: [seanm@server ~]$ ls -l -rw-r--r-- 1 seanm seanm 40 Jan 4 13:45 pangram.txt And yet: [seanm@client ~]$ smbclient //server/seanm -U seanm -W WORKGROUP Enter seanm's password: Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1] smb: \> ls . D 0 Fri Jan 7 10:08:55 2011 .. D 0 Fri Jan 7 07:58:31 2011 58994 blocks of size 262144. 50356 blocks available This behavior is present on both a Windows client and a Linux client system. The behavior is present with the firewall on and with the firewall off, so it's not that. Neither /var/log/messages nor /var/log/secure have any complaints about Samba. I doubt that SELinux is a problem: just in case, here are the relevant settings. [root@server ~]# getsebool -a | grep samba samba_domain_controller --> off samba_enable_home_dirs --> on samba_export_all_ro --> off samba_export_all_rw --> off samba_share_fusefs --> off samba_share_nfs --> off use_samba_home_dirs --> on virt_use_samba --> off What am I doing wrong here, and what can I do to fix it? Edit: SELinux probably is the problem, judging by the fact that the issue goes away when I set SELinux to "permissive" or issue setsebool -P samba_export_all_rw on - both of which are unacceptable for production environments. What the heck kind of context does a directory need to have on it for Samba users to actually get files from it? I consider rolling your own rules and/or context to be deeply sub-optimal.

  Read the article

• /etc/security/limits.conf for setting program limits in Linux

  - by Flavius Akerele

  I have the following inside /etc/security/limits.conf (I have specified root separately because * will not include it.) user2 - core unlimited * - core 0 root - core 0 * - rss 512000 root - rss 512000 * - nproc 100 root - nproc 100 * - maxlogins 1 root - maxlogins 1 I run a program as user2 (./programname) but /proc/3498/limits says cores are disabled: Limit Soft Limit Hard Limit Units Max cpu time unlimited unlimited seconds Max file size unlimited unlimited bytes Max data size unlimited unlimited bytes Max stack size 8388608 unlimited bytes Max core file size 0 0 bytes Max resident set 524288000 524288000 bytes Max processes 100 100 processes Max open files 1024 1024 files Max locked memory 65536 65536 bytes Max address space unlimited unlimited bytes Max file locks unlimited unlimited locks Max pending signals 14001 14001 signals Max msgqueue size 819200 819200 bytes Max nice priority 0 0 Max realtime priority 0 0 Max realtime timeout unlimited unlimited us Both ulimit -Sa and ulimit -Ha output that cores are disabled: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 14001 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) 512000 open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) unlimited cpu time (seconds, -t) unlimited max user processes (-u) 100 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Why are cores disabled ?

  Read the article

• Improve speed of "start menu" in Linux Mint 10 - Ubuntu 10.10 derivative

  - by Gabriel L. Oliveira

  I have a global menu (including application, administration and system tabs) that is taking too much time (for me) to load (about 2.5 seconds). Of course, this time is taken only during first start. After it have loaded, next times are better ( less than 0.2 miliseconds) The menu was taking more time before (about 5 seconds), and I found that was because of the 'Other' part of the menu, that included many applications installed with Wine, so I removed all of them (I didn't need them at all). I have a "normal" knowledge of programming, and I think that the process of starting the menu for the first time has some kind of "cache function", that tries to find which apps are present that need to be placed under menu to be shown to user. But didn't found this function so that I could analyze in details what he is doing (if searching for files under "~/.local/share/applications" or anything else). Also, I found that hitting "Alt-F2" also fires this "cache function", because after waiting it to load, the process of opening the menu took less than 0.2 miliseconds. So, could anyone help me in order to reduce this time? I found on internet that some user could reduce the time by resizing the icons of applications. But found here that most of my icons are already at 25x25 size. Any other idead? Maybe a multiprocess to load it, or include it under startup... don't know. Ps: Sorry if this is an awkward question, but I just do not like waiting for things to happen, and think that this process should be smoother than it's now. Also, thanks in advance!

  Read the article

• Have only read access to Samba

  - by Tahir Malik

  Hi I've been struggling a lot with Samba on Centos 5.5 lately. I develop in Windows 7 and send files through scp (ant task), but it's to slow and wanted to setup thoroughly samba. After installing and following some guides I've done the following: Disable firewall (iptables) Disable SelLinux (didn't do that at the start, but didn't help either) setup my smbusers file to map my windows user to root (root = "Tahir Malik" -- works) added a current user mitco to the sambapassdb with the command smbpasswd -a mitco , because the windows user had only read access So both the users have read access to my share. Here is my smb.conf snippit: [global] workgroup = MITCO server string = Samba Server Version %v netbios name = centos ; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24 ; hosts allow = 127. 192.168.12. 192.168.13. [alf4] comment = Alfresco 4 path = /opt read only = no valid users = mitco, mitco force user = root force group = root admin users = mitco , mitco writeable = yes ; browseable = yes What also maybe important is that the /opt is only writable by root, but that shouldn't matter because I use the force user and group or admin users. The log file : [2012/09/29 07:43:44, 0] smbd/server.c:main(958) smbd version 3.0.33-3.39.el5_8 started. Copyright Andrew Tridgell and the Samba Team 1992-2008 [2012/09/29 07:43:59, 1] smbd/service.c:make_connection_snum(1085) mitco-tahir (192.168.13.1) connect to service alf4 initially as user root (uid=0, gid=0) (pid 5228)

  Read the article

• IIS 7 + Tomcat 7 - how to reach http://localhost:8080/my_app under e.g. http://my_app.local

  - by Sk8erPeter

  In brief: IIS 7 + Apache Tomcat 7 + isapi_redirect.dll: I have a deployed and working Tomcat-application available under http://localhost:8080/my_app. I would like to see the same content under http://my_app.local (and NOT the default Tomcat-site [which you can see below]). How can I do that? Longer explained: I have IIS 7 (7.5.7600.16385) and Apache Tomcat/7.0.22 installed. I deployed an application (let's call it "my_app") in Tomcat, which now can be reached at http://localhost:8080/my_app, works fine. I added a new web site in IIS panel with the path of the Tomcat deployed my_app, which looks like this: "c:\Program Files\Apache Software Foundation\Tomcat 7.0\webapps\my_app" I binded the host name my_app.local. After that, I configured isapi_redirect.dll like this (or that). Now, when I open http://my_app.local, I can see the default Tomcat site (see below). BUT under http://my_app.local I would like to see the same content as under http://localhost:8080/my_app. How can I do that? Thank you very much in advance!! my config files: isapi_redirect.properties (I made a dir junction to c:\tomcat, so this also works :) ) workers.properties uriworkermap.properties rewrites.properties (empty)

  Read the article

• Script launching 3 copies of rsync

  - by organicveggie

  I have a simple script that uses rsync to copy a Postgres database to a backup location for use with Point In Time Recovery. The script is run every 2 hours via a cron job for the postgres user. For some strange reason, I can see three copies of rsync running in the process list. Any ideas why this might the case? Here's the cron entry: # crontab -u postgres -l PATH=/bin:/usr/bin:/usr/local/bin 0 */2 * * * /var/lib/pgsql/9.0/pitr_backup.sh And here's the ps list, which shows two copies of rsync running and one sleeping: # ps ax |grep rsync 9102 ? R 2:06 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log 9103 ? S 0:00 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log 9104 ? R 2:51 rsync -avW /var/lib/pgsql/9.0/data/ /var/lib/pgsql/9.0/backups/pitr_archives/20110629100001/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log And here's the uber simple script that seems to be the cause of the problem: #!/bin/sh LOG="/var/log/pgsql-pitr-backup.log" base_backup_dir="/var/lib/pgsql/9.0/backups" wal_archive_dir="$base_backup_dir/wal_archives" pitr_archive_dir="$base_backup_dir/pitr_archives" timestamp=`date +%Y%m%d%H%M%S` backup_dir="$pitr_archive_dir/$timestamp" mkdir -p $backup_dir echo `date` >> $LOG /usr/bin/psql -U postgres -c "SELECT pg_start_backup('$backup_dir');" rsync -avW /var/lib/pgsql/9.0/data/ $backup_dir/ --exclude pg_xlog --exclude recovery.conf --exclude recovery.done --exclude pg_log /usr/bin/psql -U postgres -c "SELECT pg_stop_backup();"

  Read the article

• ifcf-ethx problem

  - by Shahmir Javaid

  Every time i run service networkd restart This is what i get Shutting down interface eth0: Device state: 3 (disconnected) [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up loopback interface: Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown Error org.freedesktop.NetworkManagerSettings.InvalidConnection: ifcfg file '/etc/sysconfig/network-scripts/ifcfg-lo' unknown [ OK ] Bringing up interface eth0: ** (process:12951): WARNING **: fetch_connections_done: error fetching user connections: (2) The name org.freedesktop.NetworkManagerUserSettings was not provided by any .service files. Active connection state: activating Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 state: activated Connection activated [ OK ] Here is my ifcfg-eth0 # Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller DEVICE=eth0 BOOTPROTO=dhcp DEFROUTE=yes DHCPCLASS= HWADDR=xxx IPV4_FAILURE_FATAL=yes IPV6INIT=no ONBOOT=yes OPTIONS=layer2=1 PEERDNS=yes PEERROUTES=yes TYPE=Ethernet UUID=xxx And my ifcfg-eth1 # Intel Corporation 82541PI Gigabit Ethernet Controller DEVICE=eth1 HWADDR=xxx ONBOOT=no And my ifcfg-lo DEVICE=lo IPADDR=127.0.0.1 NETMASK=255.0.0.0 NETWORK=127.0.0.0 # If you're having problems with gated making 127.0.0.0/8 a martian, # you can change this to something else (255.255.255.255, for example) BROADCAST=127.255.255.255 ONBOOT=yes NAME=loopback Any ideas?

  Read the article

• Restarting shell script with &disown using Monit

  - by Solas Admin

  I have a shell script that runs a C++ backend mail system (PluginHandler). I need to monitor this process in Monit and restart it if it fails. The script: export LD_LIBRARY_PATH=/usr/local/lib/:/CONFIDENTAL/CONFIDENTAL/Common/ cd PluginHandler/ ./PluginHandler This script does not have a PID file and we run this script by executing ./rundaemon.sh &disown ./pluginhandler starts the process and starts logging into /etc/output/output.log I stop the process by identifying the process ID with [ps -f | grep PluginHandler] and then killing the process. I can check the process in Monit just fine, but I think Monit is starting the process if it is not running but it can't do &disown so the process ends as soon as it starts. This is the code in the monitrc file for checking this process: check process Backend matching "PluginHandler" if not exist then alert start "PATH/TO/SCRIPT/rundaemon.sh &disown" alert [email protected] only on {timeout} with mail-format {subject: "[BLAH"} I tried to stop the script from terminating by modifying the script like the following but this does not work either. export LD_LIBRARY_PATH=/usr/local/lib/:/home/CONFIDENTAL/production/CONFIDENTAL/Common/ cd PluginHandler/ (nohup ./PluginHandler &) return Any help to write a proper Monit rules to resolve this issue would be greatly appreciated :)

  Read the article

• Cannot get Windows snipping tool to auto run with AutoHotKey

  - by jasondavis

  I am trying to get Windows 7 sniping tool to run when I hit my PRINTSCREEN keyboard button with AUTOHOTKEY. I have been unsuccessful so far though. Here is what I have for the AutoHotKey script. I have tried this PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool.exe and this PRINTSCREEN::Run, SnippingTool And all those give me this error when I hit the PRINTSCREEN button... It basicly says it cannot find the file, however the file path seems to be correct, I can copy paste it into a window and it opens the snipping tool, any ideas why it will not work? Here is the full code to my AHK file... ; ; AutoHotkey Version: 1.x ; Language: English ; Platform: Win7 ; Author: Jason Davis <friendproject@> ; ; Script Function: ; Template script (you can customize this template by editing "ShellNew\Template.ahk" in your Windows folder) ; #NoEnv ; Recommended for performance and compatibility with future AutoHotkey releases. SendMode Input ; Recommended for new scripts due to its superior speed and reliability. SetWorkingDir %A_ScriptDir% ; Ensures a consistent starting directory. /* PRINTSCREEN = Will run Windows 7 snipping tool */ PRINTSCREEN::Run, c:\windows\system32\SnippingTool.exe return

  Read the article

• Clipboard bug in Wordpad in Windows 7 (accidentally pasting large file into application)

  - by frenchglen

  In Win7, I use Wordpad, and I really like it. For my needs it's lean and fast, yet has the formatting functionalities I'm after when working on my TXT/RTF files on a daily basis. I don't intend to change text editors. There's a really bad bug which has ALWAYS plagued me. If you have a large file contained in the clipboard, like a 238MB FLAC file, and you accidentally paste it into Wordpad for whatever reason - it hangs the application for a VERY long time (like 2 hours, it depends on how big the file is, because it tries to 'handle' it). You either have to close the application and lose any unsaved changes, or go do something else until the item has finished pasting into Wordpad (it actually eventually drops the file's icon in wordpad just like how it appears in Windows Explorer). It's a Windows bug, a Wordpad bug. Is there some solution for this? Or is the problem fixed in Windows 8 (if anyone can tell me)? .....I'm not going to try out Win8 myself, merely to answer this question - that's what I'm asking it on SuperUSer for! I'm really hoping it's one of those little-yet-big things that they've fixed in Win8 (like removing the 255-character file path limit in Explorer, which is awesome). Thank you for your help, if you have Win8 handy and can test this. :)

  Read the article

• internet-based sync software that will keep running after Windows Live Sync stops doing PC-to-PC-syncs?

  - by Warren P

  According to the wikipedia page, Microsoft Live Sync will shortly stop offering the PC-to-PC sync service. There are lots of apps to sync two PCs on the same LAN, but I want to sync two PCs that are in different cities, across the internet, traversing two different NATs, and that requires some kind of service running in the internet that both connect into. There is already a few questions about syncing folders and files, but this is not a duplicate because none of them answer this basic question: Microsoft Live Sync works better than RSYNC, or any of the linked SYNC solutions in any of the "not really duplicates" because it works even when the two PCs have NAT and firewalls between them that forbid direct connectivity, because Windows Live Sync has a free always-on internet server that all the client PCs connect into. I'm looking for a FREE (no-fees) Microsoft Live Sync work-alike PC-to-PC sync solution that works between PCs and Macs, at least, as well as between PCs, and works behind NAT and firewalls at least as well as Microsoft's solution. (Note that Microsoft's solution makes only outbound socket calls to a microsoft server, so this solution must necessarily include a server-hub component that is hosted publically on a free site and which does not require that I set up and manage and pay for my own public internet hosting site) Hint: None of the answers in the linked duplicate are equivalent (PureSync,FreeFileSync,BestSync 2010,SyncButler,Comodo BackUp,QuickShadow,Gbridge) in that none of them work for the PC to Mac situation, where firewalls and nats prevent direct connection, or else they require money to be paid. When Microsoft Live Sync / Live Mesh finally kills direct PC-to-PC mode, the limitation will be that you will have to pay for more than 25 GB of cloud service, and you can then only sync PC #1 to PC #2 if you first sync to the cloud, then down to other clients. I can currently sync 100 gb of data from one computer to another, only temporarily "moving the data" through Microsoft's data servers without using up my Skydrive storage quota.

  Read the article

• Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

  - by Rob

  This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

  Read the article

• nginx 2 symfony2 web application, one ip no domain

  - by Krzysztof Koch

  I have irritating with nginx. I set up in /usr/share/nginx/www/firstapp one application and in /usr/share/nginx/www/secondapp. in my default conf i setup that in / root localization i want first app: when write 9.9.9.9 in browser show me first app, and when i write 9.9.9.9/makeup, there not show me seccond app. Why first app displays me good, and seccondapp cannot? Please help me. Sorry for quality here pasterbin code: enter link description here server { listen 80; server_name localhost; root /usr/share/nginx/www/firstapp/web; access_log /var/log/nginx/$host.access.log; error_log /var/log/nginx/error.log error; # strip app.php/ prefix if it is present rewrite ^/app\.php/?(.*)$ /$1 permanent; location / { root /usr/share/nginx/www/firstapp/web/; index app.php; try_files $uri @rewriteapp; } location /makeup/ { alias /usr/share/nginx/www/seccondapp/web/; index app.php; try_files $uri @rewriteapp; } location @rewriteapp { rewrite ^(.*)$ /app.php/$1 last; } # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 location ~ ^/(app|app_dev)\.php(/|$) { #fastcgi_pass 127.0.0.1:9000; fastcgi_pass unix:/var/lib/php5-fpm/www.sock; fastcgi_split_path_info ^(.+\.php)(/.*)$; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param HTTPS off; #fastcgi_param SERVER_PORT 80; }

  Read the article

< Previous Page | 831 832 833 834 835 836 837 838 839 840 841 842  | Next Page >