Search Results

Search found 2397 results on 96 pages for 'copying'.

Page 84/96 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• My iPhone app runs fine in simulator but quit in device (iPod touch 3.1.2) test, I got the following

  - by Mickey Shine

  I was running myapp on an iPod touch and I noticed it missed some libraries. Is that the reason? [Session started at 2010-03-19 15:57:04 +0800.] GNU gdb 6.3.50-20050815 (Apple version gdb-1128) (Fri Dec 18 10:08:53 UTC 2009) Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "--host=i386-apple-darwin --target=arm-apple-darwin".tty /dev/ttys007 Loading program into debugger… Program loaded. target remote-mobile /tmp/.XcodeGDBRemote-237-78 Switching to remote-macosx protocol mem 0x1000 0x3fffffff cache mem 0x40000000 0xffffffff none mem 0x00000000 0x0fff none run Running… [Switching to thread 11779] [Switching to thread 11779] sharedlibrary apply-load-rules all (gdb) continue warning: Unable to read symbols for "/Library/MobileSubstrate/MobileSubstrate.dylib" (file not found). 2010-03-19 15:57:18.892 myapp[2338:207] MS:Notice: Installing: com.yourcompany.myapp [myapp] (478.52) 2010-03-19 15:57:19.145 myapp[2338:207] MS:Notice: Loading: /Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib warning: Unable to read symbols for "/Library/MobileSubstrate/DynamicLibraries/Backgrounder.dylib" (file not found). warning: Unable to read symbols for "/Developer/Platforms/iPhoneOS.platform/Developer/SDKs/iPhoneOS3.1.2.sdk/usr/lib/libsubstrate.dylib" (file not found). MS:Warning: message not found [myappAppDelegate applicationWillResignActive:] MS:Warning: message not found [myappAppDelegate applicationDidBecomeActive:] 2010-03-19 15:57:19.550 myapp[2338:207] in FirstViewController 2010-03-19 15:57:20.344 myapp[2338:207] in load table view 2010-03-19 15:57:20.478 myapp[2338:207] in loading splash view 2010-03-19 15:57:22.793 myapp[2338:207] in set interface Program received signal: “0”. warning: check_safe_call: could not restore current frame

  Read the article

• PHP include taking too long

  - by wxiiir

  I have a php file with around 100mb which is full of arrays (only arrays). I've made a script that includes this file (for processing), first it exhausted the default Xampp 128mb memory limit, i've raised it to 1024mb but it just takes forever and doesn't do anything. I'm sure the problem is being created by the sheer size of the file because i've tried removing all lines of code and just leaving the include and an echo for me to know when it finishes executing, and it does the same thing (which is taking forever), i've also tried to run the 100mb file in separate and same thing again. A 10mb file is taking forever as well but a similar 1mb file is almost instantly read and executed so the problem must be more than just the file size. I was avoiding using c++ for a simple project as this and would rather not to as php is easier for me and the task that will be executed doesn't need to benefit from the added speed that it would have if it had been done in c++ but if i have no luck in solving this problem i guess i'll have to. EDIT Reasons for not using a database: 1-Whoever made it didn't used a database and it will be pretty hard to store this in an organized database if i'm not able to do something with it first, like just reading it, copying parts from it or putting in memory or something. 2-I don't have experience working with databases as pretty much all stuff i've ever done in php didn't needed large amounts of stored data, 50kb at best, if i was thinking about a big project or huge chunks of data as this one, i definitely would, but i didn't made this mess to start with and now i have to undo it. 3-The logic for having to store a small portion of data like 10mb in hard drive when now every computer has pretty much enough ram to fit the whole OS in it is pretty much incomprehensible unless someone gives a good explanation about it, if i had to access a lot of said files simultaneously i would understand but like i said, this is a simple project, this is the only file that will be accessed at a given time this isn't even to make some kind of website, it's to run a few times and be done with it.

  Read the article

• Web scrapping from a Google Chrome extension

  - by limoragni

  I've started to develop a Chrome extension to navigate and prform actions on a website. Until now the extension is able to receive a couple of parameters and check a set of radio-buttons, fill in a few inputs of a form and then submit it. What I want to do now is to repeat the process, but I'm stuck when the page is reloaded. And I don't know how can I do to make the script reacts to the finish of the request. The workflow I want to achieve is the following (is for automaticly copying a certain object): Popup side Enter the number of the Master object to copy Enter the base name of the copies (example Mod, so the I can iterate and add mod1, mod2, modn) Enter the number of copies Background side Select master Select standard options Fill in inputs Submit form Wait for the page to complete the request and continue to the next copy. (here I need help) The problem is on the repetition, the rest is taking care of. I assume that must be a way of dealing with requests. Any ideas? By the way I'm doing it all with the extension and tabs methods of google chrome plus javascript and jquery.

  Read the article

• How to import 3rd party libraries

  - by Thahzan Mohomed

  I found some cool android libraries the other day and decided to try some. But I'm having trouble correctly importing the library. This is the URL of the library : https://github.com/dmytrodanylyk/android-process-button I first tried importing the library to eclipse (and move the files in java directory to src directory and set the project as library) and importing the sample to eclipse and set it to use the library project (Properties-Android-Libraries). But it didn't work. The layout files said it failed to instantiate [custom widget class]. The I tried importing the .jar file to libs directory (and update the java build path) but it didn't work either. It showed errors in the java files too. I then tried copying all the java and layout files to the sample project directory and it worked. But I'm guessing that's not the way to work with 3rd party libraries. I first thought it's some error with the library but all the other libraries I tried to import to my projects faced the same problem. Can someone walk me through how to correctly import a 3rd party library to my android project?

  Read the article

• Copy existing XML, duplicate element and modify

  - by Robert

  Hi, I have a tricky XSL problem at the moment. I need to copy the existing XML, copy a certain element (plus its child elements) and modify the value of two child-elements. The modifications are: divide value of the 'value' element by 110 and edit the value of the 'type' element from 'normal' to 'discount'. This is currently what I have: Current XML: <dataset> <data> <prices> <price> <value>50.00</value> <type>normal</type> </price> </prices> </data> </dataset> Expected result <dataset> <data> <prices> <price> <value>50.00</value> <type>normal</type> </price> <price> <value>45.00</value> <type>discount</type> </price> </prices> </data> </dataset> Any takers? I've gotten as far as copying the desired 'price' element using copy-of, but I'm stuck as to how to modify it next.

  Read the article

• JVM terminated. Exit code = -1

  - by Lex

  Hello, I've been using Eclipse for some time already, and I didn't have any problems with it. However, when I tried to generate some javadoc, I found that I didn't have the SDK installed. I installed jdk 6u23, and from then on, Eclipse hasn't been working. At first it told me it couldn't find a JRE/SDK. After copying and placing the JRE in the Eclipse folder, the error changed to this: http://i258.photobucket.com/albums/hh261/magical_7/Eclipse.png I've searched around for some solutions, and found a few of varying nature. However, none of them seemed to work. I've tried emptying my eclipse.ini file without success. Altering some values in eclipse.ini didn't work either. Installing Java SDK 1.5 didn't work. Does anyone have other possible solutions? Update: I tried reinstalling Eclipse, but it didn't fix the problem. I did notice that it's a 32bit version, while I'm running a 64bit system. However, if this were to be the problem, I find it strange that it hasn't been an issue earlier.

  Read the article

• Error "initializer element is not constant" when trying to initialize variable with const

  - by tomlogic

  I get an error on line 6 (initialize my_foo to foo_init) of the following program and I'm not sure I understand why. typedef struct foo_t { int a, b, c; } foo_t; const foo_t foo_init = { 1, 2, 3 }; foo_t my_foo = foo_init; int main() { return 0; } Keep in mind this is a simplified version of a larger, multi-file project I'm working on. The goal was to have a single constant in the object file, that multiple files could use to initialize a state structure. Since it's an embedded target with limited resources and the struct isn't that small, I don't want multiple copies of the source. I'd prefer not to use: #define foo_init { 1, 2, 3 } I'm also trying to write portable code, so I need a solution that's valid C89 or C99. Does this have to do with the ORGs in an object file? That initialized variables go into one ORG and are initialized by copying the contents of a second ORG? Maybe I'll just need to change my tactic, and have an initializing function do all of the copies at startup. Unless there are other ideas out there?

  Read the article

• Excel: Automating the Selection of an Unknown Number of Cells

  - by user1905080

  I’m trying to automate the formatting of an excel file by a macro and am seeking a solution. I have two columns titled Last Name and First Name which I would like to concatenate into a separate column titled Last Name, First Name. This is simple enough when done by hand: create one cell which does this, then drag that cell to include all cells within the range. The problem appears when trying to automate this. Because I can’t know the number of names that need to be concatenated ahead of time, I can’t automate the selection of cells by dragging. Can you help me automate this? I’ve tried a process of copying the initial concatenated cell, highlighting the column, and then pasting. I’ve also tried to use a formula which returned the concatenation only if there is text in the “Last Name” and “First Name” columns. However, in both cases, I end up with some 100,000 rows, putting a serious cramp on my ability to manipulate the worksheet. The best solution I can think of is to create concatenations within a fixed range of cells. Although this would create useless cells, at least there wouldn’t be 99,900 of them.

  Read the article

• Migrate from Oracle to MySQL

  - by Cassy

  Hi together. We ran into serious performance problems with our Oracle database and we would like to try to migrate to a MySQL-based database (either MySQL directly or, more preferrable, Infobright). The thing is, we need to let the old and the new system overlap for at least some weeks if not months, before we actually know, if all features of the new database match our needs. So, here is our situation: The Oracle database consists of multiple tables with each millions of rows. During the day, there are literally thousands of statements, which we cannot stop for migration. Every morning, new data is imported into the Oracle database, replacing some thousands of rows. Copying this process is not a problem, so we could, in theory, import in both databases in parallel. But, and here lies the challenge, for this to work, we need to have an export from the Oracle database with a consistent state from one day. (We cannot export some tables on Monday and some others on Tuesday, etc.) This means, that at least the export should be finished in less than one day. Our first thought was to dump the schema, but I wasn't able to find a tool to import an Oracle dump file into mysql. Exporting tables in CSV files might work, but I'm afraid it could take too long. So my question now is: What should I do? Is there any tool to import Oracle dump files into MySQL? Does anybody have any experience with such a large-scale migration? Thanks in advance, Cassy PS: Please, don't suggest performance optimization techniques for Oracle, we already tried a lot :-)

  Read the article

• Java redirected system output to jtext area, doesnt update until calculation is finished

  - by user1806716

  I have code that redirects system output to a jtext area, but that jtextarea doesnt update until the code is finished running. How do I modify the code to make the jtextarea update in real time during runtime? private void updateTextArea(final String text) { SwingUtilities.invokeLater(new Runnable() { public void run() { consoleTextAreaInner.append(text); } }); } private void redirectSystemStreams() { OutputStream out = new OutputStream() { @Override public void write(int b) throws IOException { updateTextArea(String.valueOf((char) b)); } @Override public void write(byte[] b, int off, int len) throws IOException { updateTextArea(new String(b, off, len)); } @Override public void write(byte[] b) throws IOException { write(b, 0, b.length); } }; System.setOut(new PrintStream(out, true)); System.setErr(new PrintStream(out, true)); } The rest of the code is mainly just an actionlistener for a button: private void updateButtonActionPerformed(java.awt.event.ActionEvent evt) { // TODO add your handling code here: String shopRoot = this.shopRootDirTxtField.getText(); String updZipPath = this.updateZipTextField.getText(); this.mainUpdater = new ShopUpdater(new File(shopRoot), updZipPath); this.mainUpdater.update(); } That update() method begins the process of copying+pasting files on the file system and during that process uses system.out.println to provide an up-to-date status on where the program is currently at in reference to how many more files it has to copy.

  Read the article

• Trouble installing R-2.15.2 on Fedora 14

  - by user1896007

  I need to install R-2.15.2, the latest version. I tried using blah> sudo yum install R to install R, but for whatever reason (maybe because it's an old version of Fedora?) my system thinks R version 13 is the most recent. So, I downloaded the .tar.gz file from R's site and used the following: blah> tar -xvf R-2.15.2.tar.gz This successfully unzipped the file. I then ran: blah> ./configure blah/R-2.15.2> ls ChangeLog COPYING Makeconf.in ONEWS src VERSION-NICK config.log doc Makefile.fw OONEWS SVN-REVISION config.site etc Makefile.in po tests configure INSTALL NEWS README tools configure.ac m4 NEWS.pdf share VERSION As you can see, makefiles are present. However, when I run "make" within the R folder, I get the following error: blah/R-2.15.2> make make: No targets specified and no makefile found. Stop. Is there any way I can fix this issue? I'm guessing people will recommend updating Fedora, but is there another way?

  Read the article

• How to remove background of a image and copy into another?

  - by Gustavo Pinent

  I'm researching about captchas. In this idea, the task is: create a image from a JPEG and remove the white background, than create another image from another JPEG, than create the final image by adding the second as a background, and copying the first one over this background preserving the transparent area created, of course. Here is the code: header("Content-Type: image/jpeg"); $nFundo = rand(0,4); $Dirs = array(rand(0,7), rand(0,7), rand(0,7), rand(0,7)); // Will be four times all $_SESSION["form_captcha"] = $Dirs; $image = ImageCreatetruecolor(320, 80); ImageAlphaBlending($image, FALSE); ImageSaveAlpha($image, TRUE); $image_seta = ImageCreateFromJPEG("_captcha-seta.jpg"); // Image do copy over $image_fundo = ImageCreateFromJPEG("_captcha-fundo-".$nFundo.".jpg"); // Image to make the background for($i=0; $i<4; $i++){ ImageCopy($image, $image_fundo, $i*80, 0, 0, 0, 80, 80); } // So far so good, a background with a pattern repeated four times $color_white = ImageColorAllocate($image_seta, 255, 255, 255); ImageColorTransparent($image_seta, $color_white); ImageSaveAlpha($image_seta, TRUE); for($i=0; $i<4; $i++){ $image_seta_rot = imageRotate($image_seta, $Dirs[$i]*45, $color_white); ImageCopyResampled($image, $image_seta_rot, $i*80, 0, 0, 0, 80, 80, 80, 80); // Try } echo(imagejpeg($image)); imagedestroy($image); I tried to replace $image_seta_rot by $image_seta ("Try" line) to see if the rotation is the problem, but even without rotation, the white wasn't removed and the image just "erase" the background created before. So the copy is failing or the white were never removed... I may create a PNG with transparent background, but will be interesting to learn how to make it dynamically, don't you think? Any ideas?

  Read the article

• C++ unrestricted union workaround

  - by Chris

  #include <stdio.h> struct B { int x,y; }; struct A : public B { // This whines about "copy assignment operator not allowed in union" //A& operator =(const A& a) { printf("A=A should do the exact same thing as A=B\n"); } A& operator =(const B& b) { printf("A = B\n"); } }; union U { A a; B b; }; int main(int argc, const char* argv[]) { U u1, u2; u1.a = u2.b; // You can do this and it calls the operator = u1.a = (B)u2.a; // This works too u1.a = u2.a; // This calls the default assignment operator >:@ } Is there any workaround to be able to do that last line u1.a = u2.a with the exact same syntax, but have it call the operator = (don't care if it's =(B&) or =(A&)) instead of just copying data? Or are unrestricted unions (not supported even in Visual Studio 2010) the only option?

  Read the article

• Truncating a file while it's being used (Linux)

  - by Hobo

  I have a process that's writing a lot of data to stdout, which I'm redirecting to a log file. I'd like to limit the size of the file by occasionally copying the current file to a new name and truncating it. My usual techniques of truncating a file, like cp /dev/null file don't work, presumably because the process is using it. Is there some way I can truncate the file? Or delete it and somehow associate the process' stdout with a new file? FWIW, it's a third party product that I can't modify to change its logging model. EDIT redirecting over the file seems to have the same issue as the copy above - the file returns to its previous size next time it's written to: ls -l sample.log ; echo > sample.log ; ls -l sample.log ; sleep 10 ; ls -l sample.log -rw-rw-r-- 1 user group 1291999 Jun 11 2009 sample.log -rw-rw-r-- 1 user group 1 Jun 11 2009 sample.log -rw-rw-r-- 1 user group 1292311 Jun 11 2009 sample.log

  Read the article

• [PHP] Does unsetting array values during iterating save on memory?

  - by saturn_rising

  Hello fellow code warriors, This is a simple programming question, coming from my lack of knowledge of how PHP handles array copying and unsetting during a foreach loop. It's like this, I have an array that comes to me from an outside source formatted in a way I want to change. A simple example would be: $myData = array('Key1' => array('value1', 'value2')); But what I want would be something like: $myData = array([0] => array('MyKey' => array('Key1' => array('value1', 'value2')))); So I take the first $myData and format it like the second $myData. I'm totally fine with my formatting algorithm. My question lies in finding a way to conserve memory since these arrays might get a little unwieldy. So, during my foreach loop I copy the current array value(s) into the new format, then I unset the value I'm working with from the original array. E.g.: $formattedData = array(); foreach ($myData as $key => $val) { // do some formatting here, copy to $reformattedVal $formattedData[] = $reformattedVal; unset($myData[$key]); } Is the call to unset() a good idea here? I.e., does it conserve memory since I have copied the data and no longer need the original value? Or, does PHP automatically garbage collect the data since I don't reference it in any subsequent code? The code runs fine, and so far my datasets have been too negligible in size to test for performance differences. I just don't know if I'm setting myself up for some weird bugs or CPU hits later on. Thanks for any insights. -sR

  Read the article

• Query total page count via SNMP HP Laserjet

  - by Tim

  I was asked to get hold of the total pages counts for the 100+ printers we have at work. All of them are HP Laser or Business Jets of some description and the vast majority are connected via some form of HP JetDirect network card/switch. After many hours of typing in IP addresses and copying and pasting the relevant figure in to Excel I have now been asked to do this on a weekly basis. This led me to think there must be an easier way, as an IT professional I can surely work out some time saving method to solve this issue. Suffice it to say I do not feel very professional now after a day or so of trying to make SNMP work for me! From what I understand the first thing is to enable SNMP on the printer. Done. Next I would need something to query the SNMP bit. I decided to go open source and free and someone here recommended net-snmp as a decent tool (I would like to have just added the printers as nodes in SolarWinds but we are somewhat tight on licences apparently). Next I need the name of the MIB. For this I believe the HP-LASERJET-COMMON-MIB has the correct information in it. Downloaded this and added to net-snmp. Now I need the OID which I believe after much scouring is printed-media-simplex-count (we have no duplex printers, that we are interested in at least). Running the following command yields the following demoralising output: snmpget -v 2c -c public 10.168.5.1 HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1 (the OID was derived from running: snmptranslate -IR -On printed-media-simplex-count Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt .1.3.6.1.2.1.1.16.1.1.1 ) Unlinked OID in HP-LASERJET-COMMON-MIB: hp ::= { enterprises 11 } Undefined identifier: enterprises near line 3 of C:/usr/share/snmp/mibs/HP-LASER JET-COMMON-MIB..txt HP-LASERJET-COMMON-MIB:.1.3.6.1.2.1.1.16.1.1.1: Am I barking up the wrong tree completely with this? My aim was to script it all to output to a file for all the IP addresses of the printers and then plonk that in Excel for my lords and masters to digest at their leisure. I have a feeling I am using either the wrong MIB or the wrong OID from said MIB (or both). Does anyone have any pointers on this for me? Or should I give up and go back to navigationg each printers web page individually (hoping not).

  Read the article

• Exchange 2010 setup /prepareAD fails to run

  - by MadBoy

  I've tried installing Exchange 2010 on Windows Server 2008 R2 (only domain controller and all-in-one system). I did setup.exe /prepareAD, setup /prepareSchema and it worked fine the first time I did it. Unfortunately due to problem with Hub Transport installation related to (at least from what I've read) IPv6 being disabled (some say disabling it helped them while some enabling helped them). I did it the proper way by using registry entry to disable IPv6 but it still errored out. So i managed to uninstall everything (renamed some old entries in registry of failed Hub Transport roles and tried to reinstal Exchange after rebooting server. Unfortunetly running setup /prepareAD now gives an error: D:setup /PrepareAd Welcome to Microsoft Exchange Server 2010 Unattended Setup By continuing the installation process, you agree to the license terms of Microsoft Exchange Server 2010. If you don't accept these license terms, please cancel the installation. To review these license terms, please go to http://go.microsoft.com/fwlink/?LinkId=150127&clcid=0x409/ Press any key to cancel setup................ No key presses were detected. Setup will continue. Preparing Exchange Setup Copying Setup Files ......................... COMPLETED No server roles will be installed Performing Microsoft Exchange Server Prerequisite Check Organization Checks ......................... COMPLETED Setup is going to prepare the organization for Exchange 2010 by using 'Setup /P repareAD'. No Exchange 2007 server roles have been detected in this topology. Af ter this operation, you will not be able to install any Exchange 2007 server rol es. Configuring Microsoft Exchange Server Organization Preparation ......................... FAILED The following error was generated when "$error.Clear(); buildToBuildUpgrade -ExsetDataAtom -AtomName OrgLevelCt -DomainController $RoleDomainController" was run: "An error occurred with error code '2147504140' and message 'The data type can't be converted to or from a native Active Directory data type.'.". The Exchange Server setup operation did not complete. Visit http://support.micro soft.com and enter the Error ID to find more information. Exchange Server setup encountered an error. Unfortunetly if i rerun the setup it complains that it needs setup /prepareAD to be run first. Basically all that works now is setup /PrepareSchema and setup /PrepareDomain complains that prepareAD wasn't done. For full information I'm also attaching error I had before I've uninstalled everything and tried again: Hub Transport Role Failed Error: The following error was generated when "$error.Clear(); install-ExsetdataAtom -AtomName SharedMachineSettings -DomainController $RoleDomainController" was run: "An error occurred with error code '2147950640' and message 'There is no such object on the server.'.". An error occurred with error code '2147950640' and message 'There is no such object on the server.'.

  Read the article

• Oracle Application Server Performance Monitoring and Tuning (CPU load high)

  - by Berkay

  Oracle Application Server Performance Monitoring and Tuning (CPU load high) i have just hired by a company and my boss give me a performance issue to solve as soon as possible. I don't have any experience with the Java EE before at the server side. Let me begin what i learned about the system and still couldn't find the solution: We have an Oracle Application Server (10.1.) and Oracle Database server (9.2.), the software guys wrote a kind of big J2EE project (X project) using specifically JSF 1.2 with Ajax which is only used in this project. They actively use PL/SQL in their code. So, we started the application server (Solaris machine), everything seems OK. users start using the app starting Monday from different locations (app 200 have user accounts,i just checked and see that the connection pool is set right, the session are active only 15 minutes). After sometime (2 days) CPU utilization gets high,%60, at night it is still same nothing changed (the online user amount is nearly 1 or 2 at this time), even it starts using the CPU allocated for other applications on the same server because they freed If we don't restart the server, the utilization becomes %90 following 2 days, application is so slow that end users starts calling. The main problem is software engineers say that code is clear, and the System and DBA managers say that we have the correct configuration,the other applications seems OK why this problem happens only for X application. I start copying the DB to a test platform and upgrade it to the latest version, also did in same with the application server (Weblogic) if there is a bug or not. i only tested by myself only one user and weblogic admin panel i can track the threads and dump them. i noticed that there are some threads showing as a hogging. when i checked the manuals and control the trace i see that it directs me the line number where PL/SQL code is called from a .java file. The software eng. says that yes we have really complex PL/SQL codes but what's the relation with Application server? this is the problem of DB server, i guess they're right... I know the question has many holes, i'd like to give more in detail but i appreciate the way you guide me. Thanks in advance ... Edit: The server both in CPU and Memory enough to run more complex applications

  Read the article

• Linux HA cluster w/Xen, Heartbeat, Pacemaker. domU does not failover to secondary node

  - by Kendall

  I am having the followig problem with an OenSuSE + Heartbeat + Pacemaker + Xen HA cluster: when the node a Xen domU is running on is "dead" the Xen domU running on it is not restarted on the second node. The cluster is setup with two nodes, each running OpenSuSE-11.3, Heartbeat 3.0, and Pacemaker 1.0 in CRM mode. For storage I am using a LUN on an iSCSI SAN device; the LUN is formatted with OCFS2 and managed with LVM. The Xen domU has two logical volumes; one for root and the other for swap. I am using IPMI cards for STONITH devices, and a dedicated ethernet link for heartbeat communications. The ha.cf file is as follows: keepalive 1 deadtime 10 warntime 5 udpport 694 ucast eth1 auto_failback off node dhcp-166 node stage use_logd yes crm yes My resources look as follows: shocrm(live)configure# show node $id="5c1aa924-bba4-4f95-a367-6c9a58ac4a38" dhcp-166 node $id="cebc92eb-af24-4833-aaf0-672adf80b58e" stage primitive Xen-Util ocf:heartbeat:Xen \ meta target-role="Started" \ operations $id="Xen-Util-operations" \ op start interval="0" timeout="60" start-delay="0" \ op stop interval="0" timeout="120" \ params xmfile="/etc/xen/vm/xen-util" primitive my-stonith stonith:external/ipmi \ params hostname="dhcp-166" ipaddr="192.168.3.106" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" primitive my-stonith2 stonith:external/ipmi \ params hostname="stage" ipaddr="192.168.3.105" userid="ADMIN" passwd="xxx" \ op monitor interval="2m" timeout="60s" property $id="cib-bootstrap-options" \ dc-version="1.0.9-89bd754939df5150de7cd76835f98fe90851b677" \ cluster-infrastructure="Heartbeat" The Xen domU config file is as follows: name = "xen-util" bootloader = "/usr/lib/xen/boot/domUloader.py" #bootargs = "xvda1:/vmlinuz-xen,/initrd-xen" bootargs = "--entry=xvda1:/boot/vmlinuz-xen,/boot/initrd-xen" memory = 4096 disk = [ 'phy:vg_xen/xen-util-root,xvda1,w', 'phy:vg_xen/xen-util-swap,xvda2,w', ] root = "/dev/xvda1" vif = [ 'mac=00:16:3e:42:42:06' ] #vfb = [ 'type=vnc,vncunused=0,vnclisten=192.168.3.172' ] extra = "" Say domU "Xen-Util" is running on node "stage"; if "stage" goes down, "Xen-Util" does not restart on node "dhcp-166". It seems to want to try as an "xm list" will show it for a few seconds and if you "xm console xen-util" it will give a message like "copying /boot/kernel.gz from xvda1 to /var/lib/xen/tmp/kernel.a53gs for booting". However, it never gets past that, eventually gives up, and no longer appears in "xm list". Now, when node "stage" comes back online after being power cycled, it detects that "Xen-Util" isn't running, and starts it (on stage). I've tried starting "Xen-Util" on node "dhcp-166" without the cluster running, and it works fine. No problems. So, I know it works in that respect. Any ideas? Thanks!

  Read the article

• OS X: Finder error -36 when using SMB shares on a Samba server bound to AD

  - by Frenchie

  We're looking at deploying SMB homes on Debian (5.0.3) for our mac clients rather than purchasing four new Xserves. We've got our test servers built and functioning properly. Windows clients behave perfectly, but we've run into an issue with OS X (10.6.x and 10.5.x). We're going this route instead of Windows file servers due to a whole bunch of other issues that arise when going that way. Specifically, when mounting a SMB share with unix extensions switched on and the remote server bound to AD, the finder cannot save files on the share, instead touching the file and then bombing out with a -36 IO error, folder creation is fine. Copying files in the terminal behaves fine and the problem seems to be limited to the finder. The issue arises (I think) as the remote UID/GID is passed across when using unix extensions. OS X uses its own winbind idmap (odsam) to work out the effective UID/GID from AD users and groups whilst we're using a rid map on the server. Consequently, there is a mismatch in ownership which the finder chooses to honour. How OS X appears to handle this is to use the remote uid and gid at the file permission level (see below) and then set an OS X acl granting the local uid/gid to have the appropriate permissions on the file. I think the finder touches the file (which the kernel allows because of the ACL) and then checks the filesystem perms and drops out with the IO error. On a Client fc-003353-d:homes2 root# ls -led test/ drwx------+ 2 135978 100513 16384 Feb 3 15:14 test/ 0: user:jfrench allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit 1: group:ARTS\domain users allow 2: group:everyone allow 3: group:owner allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 4: group:group allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit 5: group:everyone allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,writesecurity,chown,file_inherit,directory_inherit,only_inherit We've tried the following without any luck: Setting the Linux side file owner to match the OS X GID/UID Adding ACLs on the linux filesystem which grant the OS X GID/UID perms Disabling extended attributes Setting steams=no in /etc/nsmb.conf on the client We're currently running a workaround which is to just turn off unix extensions which forces the macs to just mount the share as the local user with u=rwx perms. This works for most things but is causing a few apps that expect certain perms to break in subtle ways. Worst case scenario is that we'll continue running in this way but we would like to have the unix extensions on. Regards. Relevant SMB config below: [global] workgroup = ARTS realm = *snip* security = ADS password server = *snip* unix extensions = yes panic action = /usr/share/panic-action %d idmap backend = rid:ARTS=100000-10000000 idmap uid = 100000-10000000 idmap gid = 100000-10000000 winbind enum users = Yes winbind enum groups = Yes veto files = /lost+found/aquota.*/ hide files = /desktop.ini/$RECYCLE.BIN/.*/AppData/Library/ ea support = yes store dos attributes = yes map system = no map archive = no map readonly = no

  Read the article

• Linux Software RAID recovery

  - by Zoredache

  I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

  Read the article

• How to create a Windows 7 installation usb media from linux ? (to install Windows 7) - Help need to know better method

  - by Abel Coto

  I have been reading some web pages and posts here and in other forums about how to create a Windows 7 installation Usb media (to install windows 7 using a usb) from linux. I asked in technet about this , and they give me general ideas about how to do it I personally am not very familiar with linux, but basicaly all that you need to do... in whatever way you do it is the following: Format a usb flash drive, either fat32 or ntfs create a partition that is large enough to host the windows installation (give or take 3GB for 64bit, aroudn 2.5gb for 32bit) and mark that partition as active/bootable. Since this can be done with windows, but just as well with a tool like gparted, you should be able to do the same in debian. Once you have created that partition, mount the iso that you download, and copy all files starting from the root, into the root of the usb flash drive. That's all there's to it. There is a method that i found in various places,that is almost the same that the man of technet has said. But,there is a step,that in that method is done,that i don't know if it is really necessary,or not. Not allways dd works.Basically, the missing step was to write a proper boot sector to the usb stick, which can be done from linux with ms-sys. This works with the Win7 retail version. Here is the complete rundown again: Install ms-sys Check what device your usb media is asigned - here we will assume it is /dev/sdb. Delete all partitions, create a new one taking up all the space, set type to NTFS, and set it bootable: *# cfdisk /dev/sdb* Create NTFS filesystem: *# mkfs.ntfs -f /dev/sdb1* Mount iso and usb media: *# mount -o loop win7.iso /mnt/iso # mount /dev/sdb1 /mnt/usb* Copy over all files: *# cp -r /mnt/iso/* /mnt/usb/* Write Windows 7 MBR on usb stick: *# ms-sys -7 /dev/sdb* ...and you're done. Shouldn't the usb work without doing the last step "# ms-sys -7 /dev/sdb" or to make the usb bootable , is a must , not only to mark the partition as bootable ? Would be better use rsync instead of cp -r ? All this steps should be done as root, i suppose , or if not , chmod to 664 and chown the directories where are mounted the usb and the iso, no ? But i suppose that the easier thing is to copy the data as root , and that this will not affect to the data. Has anyone tried this method or some similar like copying the iso with dd ?

  Read the article

• autocomplete not working on one sever, works on others

  - by dogmatic69

  I have Ubuntu 10.10 x64 and x86 running on various servers and auto complete works on all of them bar one. The issue: apt-<tab> would show a list of options but sudo apt-<tab> would not. After fiddling with it for a few hours i've found that /etc/bash_autocomplete did not exist. on the broken server. Copying the one from a working one it now works. but still not properly. sudo apt-get ins<tab> does not show do anything. listing the files in /etc/bash_autocomplete.d/ on the working server has about 50 files, and the broken one only two or three. i dont think that i can just copy these files though as it might show commands for things that are not even installed. TL;DR autocomplete broken, how can i fix it. Seems like its disabled somewhere, why is this EDIT: Ok, it was not ever installed... $ sudo apt-get install bash-completion Reading package lists... Done Building dependency tree Reading state information... Done The following NEW packages will be installed bash-completion 0 upgraded, 1 newly installed, 0 to remove and 3 not upgraded. Need to get 140kB of archives. After this operation, 1,061kB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu/ maverick-updates/main bash-completion all 1:1.2-2ubuntu1.1 [140kB] Fetched 140kB in 0s (174kB/s) Selecting previously deselected package bash-completion. (Reading database ... 23808 files and directories currently installed.) Unpacking bash-completion (from .../bash-completion_1%3a1.2-2ubuntu1.1_all.deb) ... Processing triggers for man-db ... Setting up bash-completion (1:1.2-2ubuntu1.1) ... its now kinda working, but still wonky... apt-get ins<tab> gives sudo apt-get insserv as the option. also apt-get install php5<tab> gives apt-get install php5/ not php5-* options.

  Read the article

• Persistent Issues on small business network using Cisco 871W and Catalyst Express 500

  - by Ben Campbell

  Being the most qualified (read: still not qualified) to solve our persistant network issues, I've turned to serverfault for guidance. I've done some searching, reading related documentation on cisco.com and tried a bit of troubleshooting. Here is the config: 100mb synchronous connection from a business internet provider (tested multiple times at 100meg at the source) Cisco 871W wireless point & router is where the WAN connection starts (this serves all our wireless). The only wired connection in the 871W is the Catalyst switch listed below. Cisco Catalyst Express 500 (24TT) is where all the wired connections terminate. About 20 Windows workstations and servers (AD/Webservers only). Some services in EC2 including mail and other web servers/apps. I've been TOLD cabling internally should be gigabit-ready. Here are the problems: generally slow download rates from the internet to the desktop/laptop frequent "page cannot be displayed" errors in browsers-sometimes 3 or 4 reloads are necessary... often times CSS wont load or other content requiring the browser to connect to a different server. slow speed within the LAN from workstation to workstation copying files. I would expect extremely fast data transfer workstation to workstation / server to workstation in this simple network. Several things I need to admit: I'm not primarily a network guy. Funding is relatively low, I need to be the guy that finds the solution. I understand most of the terminology and most of the technology. Implementation is where I fail due to lack of experience. Getting to the point: I'm wondering whether experienced network admins think that our small network should be sufficiently served with our current hardware if configured properly... or if we should purchase new equipment and start fresh? If starting fresh is the plan, whatever that new equipment may be is a likely different question entirely. If I haven't provided enough information, I will happily do some troubleshooting and update with the results. I have experience using wireshark and some other tools. Please let me know what you think would be most helpful and thanks in advance. EDIT: I forgot to add that the Cisco applicance will not finish loading the SDM Express console. It hangs every time at the "populating modules... DHCP". It eventually crashes and closes. I've rebooted the hardware and this still happens.

  Read the article

• emerge only prints it's parameters along with "Wrong gcc version" message.

  - by Dmitriy Matveev

  Our gentoo server has been left in inconsistent state. I don't know what have been done wrong previously, but now I need to fix the system somehow. I've tried to do revdep-rebuild, but it has failed: ... x11-libs/gksu:0 x11-libs/gtk+:2 x11-libs/gtkglarea:2 x11-libs/libgksu:2 x11-libs/libsvg-cairo:0 x11-libs/qt-gui:4 .......... IMPORTANT: 12 news items need reading for repository 'gentoo'. Use eselect news to read news items. Calculating dependencies... done! emerge: there are no ebuilds to satisfy "gnome-base/gswitchit-plugins:0". emerge: searching for similar names... emerge: Maybe you meant any of these: gnome-base/gswitchit-plugins, gnome-extra/gswitchit-plugins, gnome-base/nautilus? IMPORTANT: 12 news items need reading for repository 'gentoo'. Use eselect news to read news items. revdep-rebuild failed to emerge all packages. you have the following choices: If emerge failed during the build, fix the problems and re-run revdep-rebuild. Use /etc/portage/package.keywords to unmask a newer version of the package. (and remove 5_order.rr to be evaluated again) Modify the above emerge command and run it manually. Compile or unmerge unsatisfied packages manually, remove temporary files, and try again. (you can edit package/ebuild list first) To remove temporary files, please run: rm /var/cache/revdep-rebuild/*.rr I've tried to remove one of the mentioned packages: harley ~ # emerge -C gswitchit-plugins Wrong gcc version = echo -C gswitchit-plugins harley ~ # I don't see any problems with the gcc, but emerge isn't working: harley ~ # gcc --version gcc (Gentoo 4.5.2 p1.0, pie-0.4.5) 4.5.2 Copyright (C) 2010 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. harley ~ # gcc-config -l [1] i686-pc-linux-gnu-3.3.6 [2] i686-pc-linux-gnu-3.4.6 [3] i686-pc-linux-gnu-3.4.6-hardened [4] i686-pc-linux-gnu-3.4.6-hardenednopie [5] i686-pc-linux-gnu-3.4.6-hardenednopiessp [6] i686-pc-linux-gnu-3.4.6-hardenednossp [7] i686-pc-linux-gnu-4.1.2 [8] i686-pc-linux-gnu-4.5.2 * harley ~ # emerge --help Wrong gcc version = echo --help harley ~ # which emerge /root/bin/emerge harley ~ # emerge Wrong gcc version = echo harley ~ # emerge fdslkgj Wrong gcc version = echo fdslkgj harley ~ # How can I fix emerge?

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >