Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 84/379 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Windows XP: How to boot up in normal mode after improper shut down?

    - by Nick
    I work in two different locations and whenever there is a power outage at one of the locations, Windows XP detects that the system was improperly shutdown. Once the power is up, the PC powers on and Windows XP enters REPAIR/SAFE mode where only someone physically in front of the PC can control it. (Networking is all disabled in this mode) Now before it enters REPAIR/SAFE mode, there is an option for a NORMAL boot. But the catch is that REPAIR/SAFE mode is selected by default with a 30 second timer. Once it automatically enters REPAIR/SAFE mode and if nobody is at the other location, I have no way to remote control it anymore. And then I have to drive over to the other location and reboot it and select boot into NORMAL mode. Where can I change this setting so that Windows XP always boots into NORMAL mode no matter how many times it is improperly shut down?

    Read the article

  • How to "get" a reliable parallel port on a laptop without a PCMCIA slot?

    - by ldigas
    Usb-Parallel port (for an old, but reliable matrix printer that has its special use) connections (cables) are unreliable. They sometimes work, sometimes don't - and since I installed Windows 7 I can't get neither of my old ones to work properly. PCMCIA is usually considered (and it is) a much more reliable solution, but unfortunatelly, none of my new laptops has a PCMCIA slot. So, all ideas are welcomed. What should I do? I'm open to all suggestions as long as you have some experience that they work more reliably than USB-Parallel cables and their wicked drivers.

    Read the article

  • Can I wake up PC/laptop on remote printing request?

    - by dzieciou
    I have an old Epson printer that does not have network adapter, only a USB socket. I have also a computer with network card. I could combine them to put this printer in my local network, but then I would need to keep the computer always up and running. That's definitely not economic. Is there a way to wake up computer when printing request arrives? Something like Wake-on-LAN? Or I am forced to use additional hardware?

    Read the article

  • Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

    - by smisner
    Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system.The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me.At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach.Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements.My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work.Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way.DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal.Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info:You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client.You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features.I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically.When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions:On the Choose the installation you want page of the installation wizard, I chose Server Farm.On the Server Type page, I chose Complete.At the end of the installation, I did not run the configuration wizard.Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end.It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective.I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed:Install SQL Server 2008 R2 to get a database engine instance installed.Run the SharePoint configuration wizard to set up the SharePoint databases.In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization.Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment.I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon.Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment.I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • How do I fix "bzr: ERROR: Unable to determine your name. "?

    - by Daniel
    I am trying to quickly create my first app and am getting gtk errors when I try to run or create an application. Here is a copy of what I executed and what results I got: daniel@laptop:~/PyDevelopment$ quickly create ubuntu-application app001 Creating project directory app001 Creating bzr repository and committing Launching your newly created project! /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `App001Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) Congrats, your new project is setup! cd /home/daniel/PyDevelopment/app001/ to start hacking. daniel@laptop:~/PyDevelopment$ cd app001 daniel@laptop:~/PyDevelopment/app001$ quickly design daniel@laptop:~/PyDevelopment/app001$ quickly rub ERROR: No rub command found in template ubuntu-application. Candidate commands are: add, commands, configure, create, debug, design, edit, getstarted, help, license, package, quickly, release, run, save, share, submitubuntu, test, tutorial, upgrade daniel@laptop:~/PyDevelopment/app001$ quickly run /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) /usr/lib/python2.7/dist-packages/gi/overrides/Gtk.py:391: Warning: g_object_set_property: construct property "type" for object `App001Window' can't be set after construction Gtk.Window.__init__(self, type=type, **kwds) daniel@laptop:~/PyDevelopment/app001$ quickly package .......Ubuntu packaging created in debian/ ....... ---------------------------------- Command returned some ERRORS: ---------------------------------- bzr: ERROR: Unable to determine your name. ---------------------------------- ERROR: can't create or update ubuntu package ERROR: package command failed Aborting

    Read the article

  • Dual monitors won't accept new settings

    - by mschulze
    I'm trying to use dual monitors but every time I try to change the display settings(external monitor is on the right of the laptop, not the left etc...) my screens go black, then my laptop screen will come back "normally" but my external monitor will just flash different shades of red or black. I cannot interact with anything on my laptop screen even though I can move my mouse around. Even when the monitors attempt to revert back the external monitor continues to flicker instead of reverting. The only way to stop it is to hard-boot but the new settings aren't saved. Also, when the dual monitors are both working my laptop screen has two vertical black bars along its sides. It's like Natty just decided I couldn't use the outer inch and a half of my laptop screen. My external monitor doesn't have this problem, and my laptop uses its full screen size when the external monitor is not hooked up. Does anyone know what I'm doing wrong? I have an HP Pavillion dv7 and an HP w2338h external monitor. Thanks!

    Read the article

  • Installing SharePoint 2010 and PowerPivot for SharePoint on Windows 7

    - by smisner
    Many people like me want (or need) to do their business intelligence development work on a laptop. As someone who frequently speaks at various events or teaches classes on all subjects related to the Microsoft business intelligence stack, I need a way to run multiple server products on my laptop with reasonable performance. Once upon a time, that requirement meant only that I had to load the current version of SQL Server and the client tools of choice. In today's post, I'll review my latest experience with trying to make the newly released Microsoft BI products work with a Windows 7 operating system. The entrance of Microsoft Office SharePoint Server 2007 into the BI stack complicated matters and I started using Virtual Server to establish a "suitable" environment. As part of the team that delivered a lot of education as part of the Yukon pre-launch activities (that would be SQL Server 2005 for the uninitiated), I was working with four - yes, four - virtual servers. That was a pretty brutal workload for a 2GB laptop, which worked if I was very, very careful. It could also be a finicky and unreliable configuration as I learned to my dismay at one TechEd session several years ago when I had to reboot a very carefully cached set of servers just minutes before my session started. Although it worked, it came back to life very, very slowly much to the displeasure of the audience. They couldn't possibly have been less pleased than me. At that moment, I resolved to get the beefiest environment I could afford and consolidate to a single virtual server. Enter the 4GB 64-bit laptop to preserve my sanity and my livelihood. Likewise, for SQL Server 2008, I managed to keep everything within a single virtual server and I could function reasonably well with this approach. Now we have SQL Server 2008 R2 plus Office SharePoint Server 2010. That means a 64-bit operating system. Period. That means no more Virtual Server. That means I must use Hyper-V or another alternative. I've heard alternatives exist, but my few dabbles in this area did not yield positive results. It might have been just me having issues rather than any failure of those technologies to adequately support the requirements. My first run at working with the new BI stack configuration was to set up a 64-bit 4GB laptop with a dual-boot to run Windows Server 2008 R2 with Hyper-V. However, I was generally not happy with running Windows Server 2008 R2 on my laptop. For one, I couldn't put it into sleep mode, which is helpful if I want to prepare for a presentation beforehand and then walk to the podium without the need to hold my laptop in its open state along the way (my strategy at the TechEd session long, long ago). Secondly, it was finicky with projectors. I had issues from time to time and while I always eventually got it to work, I didn't appreciate those nerve-wracking moments wondering whether this would be the time that it wouldn't work. Somewhere along the way, I learned that it was possible to load SharePoint 2010 in a Windows 7 which piqued my interest. I had just acquired a new laptop running Windows 7 64-bit, and thought surely running the BI stack natively on my laptop must be better than running Hyper-V. (I have not tried booting to Hyper-V VHD yet, but that's on my list of things to try so the jury of one is still out on this approach.) Recently, I had to build up a server with the RTM versions of SQL Server 2008 R2 and Sharepoint Server 2010 and decided to follow suit on my Windows 7 Ultimate 64-bit laptop. The process is slightly different, but I'm happy to report that it IS possible, although I had some fits and starts along the way. DISCLAIMER: These products are NOT intended to be run in production mode on the Windows 7 operating system. The configuration described in this post is strictly for development or learning purposes and not supported by Microsoft. If you have trouble, you will NOT get help from them. I might be able to help, but I provide no guarantees of my ability or availablity to help. I won't provide the step-by-step instructions in this post as there are other resources that provide these details, but I will provide an overview of my approach, point you to the relevant resources, describe some of the problems I encountered, and explain how I addressed those problems to achieve my desired goal. Because my goal was not simply to set up SharePoint Server 2010 on my laptop, but specifically PowerPivot for SharePoint, I started out by referring to the installation instructions at the PowerPiovt-Info site, but mainly to confirm that I was performing steps in the proper sequence. I didn't perform the steps in Part 1 because those steps are applicable only to a server operating system which I am not running on my laptop. Then, the instructions in Part 2, won't work exactly as written for the same reason. Instead, I followed the instructions on MSDN, Setting Up the Development Environment for SharePoint 2010 on Windows Vista, Windows 7, and Windows Server 2008. In general, I found the following differences in installation steps from the steps at PowerPivot-Info: You must copy the SharePoint installation media to the local drive so that you can edit the config.xml to allow installation on a Windows client. You also have to manually install the prerequisites. The instructions provides links to each item that you must manually install and provides a command-line instruction to execute which enables required Windows features. I will digress for a moment to save you some grief in the sequence of steps to perform. I discovered later that a missing step in the MSDN instructions is to install the November CTP Reporting Services add-in for SharePoint. When I went to test my SharePoint site (I believe I tested after I had a successful PowerPivot installation), I ran into the following error: Could not load file or assembly 'RSSharePointSoapProxy, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' or one of its dependencies. The system cannot find the file specified. I was rather surprised that Reporting Services was required. Then I found an article by Alan le Marquand, Working Together: SQL Server 2008 R2 Reporting Services Integration in SharePoint 2010,that instructed readers to install the November add-in. My first reaction was, "Really?!?" But I confirmed it in another TechNet article on hardware and software requirements for SharePoint Server 2010. It doesn't refer explicitly to the November CTP but following the link took me there. (Interestingly, I retested today and there's no longer any reference to the November CTP. Here's the link to download the latest and greatest Reporting Services Add-in for SharePoint Technologies 2010.) You don't need to download the add-in anymore if you're doing a regular server-based installation of SharePoint because it installs as part of the prerequisites automatically. When it was time to start the installation of SharePoint, I deviated from the MSDN instructions and from the PowerPivot-Info instructions: On the Choose the installation you want page of the installation wizard, I chose Server Farm. On the Server Type page, I chose Complete. At the end of the installation, I did not run the configuration wizard. Returning to the PowerPivot-Info instructions, I tried to follow the instructions in Part 3 which describe installing SQL Server 2008 R2 with the PowerPivot option. These instructions tell you to choose the New Server option on the Setup Role page where you add PowerPivot for SharePoint. However, I ran into problems with this approach and got installation errors at the end. It wasn't until much later as I was investigating an error that I encountered Dave Wickert's post that installing PowerPivot for SharePoint on Windows 7 is unsupported. Uh oh. But he did want to hear about it if anyone succeeded, so I decided to take the plunge. Perseverance paid off, and I can happily inform Dave that it does work so far. I haven't tested absolutely everything with PowerPivot for SharePoint but have successfully deployed a workbook and viewed the PowerPivot Management Dashboard. I have not yet tested the data refresh feature, but I have installed. Continue reading to see how I accomplished my objective. I unintalled SQL Server 2008 R2 and started again. I had different problems which I don't recollect now. However, I uninstalled again and approached installation from a different angle and my next attempt succeeded. The downside of this approach is that you must do all of the things yourself that are done automatically when you install PowerPivot as a new server. Here are the steps that I followed: Install SQL Server 2008 R2 to get a database engine instance installed. Run the SharePoint configuration wizard to set up the SharePoint databases. In Central Administration, create a Web application using classic mode authentication as per a TechNet article on PowerPivot Authentication and Authorization. Then I followed the steps I found at How to: Install PowerPivot for SharePoint on an Existing SharePoint Server. Especially important to note - you must launch setup by using Run as administrator. I did not have to manually deploy the PowerPivot solution as the instructions specify, but it's good to know about this step because it tells you where to look in Central Administration to confirm a successful deployment. I did spot some incorrect steps in the instructions (at the time of this writing) in How To: Configure Stored Credentials for PowerPivot Data Refresh. Specifically, in the section entitled Step 1: Create a target application and set the credentials, both steps 10 and 12 are incorrect. They tell you to provide an actual Windows user name and password on the page where you are simply defining the prompts for your application in the Secure Store Service. To add the Windows user name and password that you want to associate with the application - after you have successfully created the target application - you select the target application and then click Set credentials in the ribbon. Lastly, I followed the instructions at How to: Install Office Data Connectivity Components on a PowerPivot server. However, I have yet to test this in my current environment. I did have several stops and starts throughout this process and edited those out to spare you from reading non-essential information. I believe the explanation I have provided here accurately reflect the steps I followed to produce a working configuration. If you follow these steps and get a different result, please let me know so that together we can work through the issue and correct these instructions. I'm sure there are many other folks in the Microsoft BI community that will appreciate the ability to set up the BI stack in a Windows 7 environment for development or learning purposes. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Installation taking a very long time, hangs at "Configuring bcmwl-kernel-source"

    - by user290522
    I am installing Ubuntu 14.04(32-bit) on my laptop (Compaq Presario V2000), and after about 7 hours, it is still in Configuring bcmwl-kernel-source (i386) mode. The messages I read are as follows: ubuntu kernel: [22814.858163] ACPI: \_SB_.PCI0.LPC0.LPC0.ACAD: ACPI_NOTIFY_BUS_CHECK event: unsupported with the numbers in the square brackets increasing. I have had Windows XP professional on this laptop, and I am erasing it. I am not sure if I should turn off the laptop, and start all over again. About 4 years ago I installed Ubuntu on this laptop, and that was very fast. The only problem I encountered was my wireless, and could not make it to work, and switched back to Windows. I appreciate any comments regarding this installation taking such a long time. After 40 hours the installation was still in configuring mode with the following messages: ubuntu CRON[29329]: (root) CMD ( cd/ && run-part .. report /etc/cron-hourly) I did the following to check for errors: pressed ctrl-alt-f2. This time the system froze. I had no other choice but to turn off the laptop, and start all over again. The exact model of the laptop is "Compaq Presario V2069CL Notebook PC" with AMD processor.

    Read the article

  • Why does my browser take me to Scour.com? (redirect virus)

    - by Paula DiTallo
    The "scour" or Rootkit.Win32.TDSS virus has a long history which can be found here: http://en.wikipedia.org/wiki/Scour Here is the primary symptom: after searching for something in your web browser using google, one of the results that you click on redirects you to scour.com. If you've executed ClamWin, Malwarebytes, McAfee, Norton, etc. to find and isolate the virus without any luck--this isn't really a surprise, since this virus attaches to existing system drivers. I only know of one reliable package that will remove this without ill effects--like adding new spyware. This package is called TDSSKiller. I have seen multiple websites that claim to have this software available, but the one that I know is reliable is located here: http://support.kaspersky.com/viruses/solutions?qid=208280684 Once you go to Kaspersky's tech support site, the TDSSKiller zip file is available for downloading. When you execute this software, you will be able to "cure" or repair the infected driver. Remember to jot down the name of the driver for future reference--should you need to reinstall the driver from a "same-as" working computer, or your install disk if the repair is ineffective. The driver that happened to get infected on my computer was the tcpip.sys driver. This caused my win sockets to loose their ip addresses. In most other instances, less critical drivers such as HDAudBus.sys are infected. In my case, I was not through correcting my computer problems until I corrected the broken WinSock issue and loaded an earlier version of the tcpip.sys driver from: C:\WINDOWS\ServicePackFiles\i386 which I placed in: C:\WINDOWS\system32\drivers Don't forget to reboot your computer after your repair! Once you download TDSSKiller and cure/repair your infected driver(s), the redirect on google searches should disappear .

    Read the article

  • internet sharing over wifi between ubuntu 11.10 and windows7

    - by Vivek Pradhan
    So i have looked up a lot of forums for these solution but haven't really found one that works. I have a laptop running ubuntu 11.10 connected to the ethernet cord at home and i want to share the internet over wifi with my friend's laptop running windows7. I did not think it would be so difficult, I tried a lot of things: I went to networks and then wireless and set up a wifi hotspot, my laptop got connected to it and the ipv4 was set to "shared to other computers". Thankfully the network was discoverable and after some tries my friend was able to connect to the network, but it still showed that there was no internet access. I tried coniguring the tcp addresses of the wifi on his laptop. Bottom line: did not work. I went to the network manager, clicked on create a new wireless network, created one with security WEP 40/128 bit passphrase, tried the other 2 options later, and did the same thing as with the wifi, this network was also not discoverable initially and after some tries, we could connect to it but then ICS was not working although there was a working internet on my ubuntu laptop. I would really appreciate if some one who has faced a similar problem and got it fixed to please give me a step by step solution of how to get this work, because this is a prety common problem with ubuntu distros I have noticed. Note: This however seems to work with ubuntu to ubuntu connections, but specifically cross OS connections like windows or my phone running android ICS are not able to see or if connect not able to share internet on my laptop

    Read the article

  • At the time of installing ubuntu, i am getting dark black screen only

    - by faruque
    I am trying to install Ubuntu 12.04 LTS dual boot with Windows 7, but when i click on Try or even Install ubuntu, i am getting black screen only. I can't see any text or anything else. When i see my Laptop's screen from close look, ubuntu in the middle of screen shown but screen is dark black. So because of this i am unable to install Ubuntu on my laptop. Please help in this regard. Following deatails of my laptop. Details of my Laptop: Manufacturer- Acer Aspire 4736 Processor- Intel core 2 duo CPU T660 Graphics driver- Mobile Intel(R) 4 series express chipset family (Microsoft corporation - WDDM 1.1), Current version installed- 8.15.10.2302 In ubuntu 11.04 i know how to boot into nomodeset, but i don't know how to boot through nomodeset in ubuntu 12.04 LTS. Because there is no option shown for F6 key. My laptop is Acer aspire 4736, and my Video/Graphics card shows unknown by ubuntu. Please someone help me. Can changing or upgrading my laptop's graphic card solve this problem..?? If yes then, which graphic card should i go for which is supported by Ubuntu and other Linux distros? Please someone help.

    Read the article

  • Dual Boot menu with Ubuntu and Windows 8 not showing up

    - by user180630
    I know a lot of posts have been written, and I had read most of them when I encountered the problem. None of them solved the problem. I have successfully installed Ubuntu 12.04 on top of Windows 8. Now my PC simply boots into Windows 8. If I press 'Esc' at start of BIOS, and then F9,the GRUB shows up and Ubuntu is listed at the top of the several options to boot from. I did run Boot-Repair once I logged into Ubuntu explicitly from GRUB as mentioned above. I did all said by Stormvirux in this link but was still unsuccessful. The debug info is listed here. Something which confuses me is the message which Boot-Repair stated after it did its job. You can now reboot your computer. Please do not forget to make your BIOS boot on sda (8004MB) disk! The boot files of [The OS now in use - Ubuntu 12.04.2 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, 200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) I don't know why it says it is far from the start of the disk as I see it first in the GRUB menu which comes up at startup. One more input, when I try to place the GRUB in sda, Boot-Repair does not progress giving me the following error: GPT detected. Please create a BIOS-Boot partition (>1MB, unformatted filesystem, bios_grub flag). This can be performed via tools such as Gparted. Then try again. Alternatively, you can retry after activating the [Separate /boot/efi partition:] option. I had to select Separate /boot/efi partition: sdb2

    Read the article

  • External display resolution issue

    - by Steven
    I'm new to Ubuntu. I've 'dabbled' in the past but Windows was annoying me too much so I finally made the change. One thing I use my laptop for is outputting the screen onto an external monitor. In Windows this usually works fine (but when there is an issue, it's a pain to resolve and has crashed my computer on many occasions). In Ubuntu it's a very simple case of "plug and play" because it displays the content immediately with no major problems. However, I can only alter the resolution of the external display to 4:3 formats, whereas the external monitor is 16:9, so the picture is stretched. In Windows there's loads of resolutions to choose from. If I disable the laptop's screen, it still doesn't allow me to display the correct resolution externally (on VGA). Further to that, if I close the laptop it keeps the external screen as it is, but when I reopen the laptop, the laptop screen doesn't turn back on until I restart. If it's a video I am watching, I can use VLC to alter the aspect ratio so the video looks fine, but it's quite an annoying work around. I used terminal to find my graphics controller, which is "Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07)" (not great, I know... the laptop was a free gift with my mobile!) Any idea of how I can get the resolution on the external monitor to be correct?

    Read the article

  • My computer will not reboot after fresh install of ubuntu 12.04LTS

    - by user170715
    I bought a new computer yesterday and it came with Windows 8. When installing Ubuntu, i choose the erase and install option thinking that Ubuntu would install easily like it did for my old laptop... After a successful install and following the instructions telling me to reboot to finish installation and remove installation media. It worked and my computer booted fine, however once I began installing updates via update manager and activating additional driver {ATI/AMD proprietary FGLRX graphics driver (post-release updates)} out of the following: Experimental AMD binary Xorg driver and kernel module ATI/AMD proprietary FGLRX graphics driver (*experimental*beta) ATI/AMD proprietary FGLRX graphics driver (post-release updates) Then reboot to finish making changes I reboot and get an error (Reboot and select proper boot device) At this point I was stuck, so I eventually reinstalled ubuntu and repeated the exacted same steps until right before i rebooted to finish making changes. However this time i used this Boot Repair tool sudo add-apt-repository ppa:yannubuntu/boot-repair sudo apt-get update sudo apt-get install -y boot-repair boot-repair After running the program i get a "boot successfully repaired" message. Then I try to reboot again and get the GNU Grub screen where it says would you like to boot: normal recovery memorytest Once it begins loading, you see the code moving across the screen then it pauses when it gets to and doesnt do anything. If someone could tell me how to fix this or get Windows 8 back soon, I'd appreciate it because like i said i just bought it yesterday and now i cant even use it.

    Read the article

  • alsa - sound issues on ubuntu 12.04

    - by tam_ubuuser
    i am having an sony E series laptop.i have an HDMI port .at this stage ,i have tested my sound card , which provides audio out on my laptop i.e i could hear songs .my laptop has two sound cards amd 5450 and an intel-hda(alsamixer shows that as s/pdif) . i decided to connect HDMI output to my new HD-TV.but, i could get only visuals on my TV,NO AUDIO OUTPUT ( HDMI cable works fine with win 7).my laptop has two sound cards.but i couldn't switch output to other card.( i don't know ,how to do that) i decided to update alsa. complied the following code in terminal. sudo apt-add-repository ppa:ubuntu-audio-dev/alsa-daily sudo apt-get update sudo apt-get install alsa-hda-dkms then,strangely no login sound, and no audio output on my laptop at all .then, started complied code from step1 sound troubleshooting procedure from offical ubuntu site.then, my speaker icon taskbar disappeared .obivously $aplay -l ,provided output as no soundcards detected . so , i implemented step 4 from that guide, it provides a output of all hardware devices in my laptop. *-multimedia UNCLAIMED description: Audio device product: Cedar HDMI Audio [Radeon HD 5400/6300 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:f0040000-f0043fff *-multimedia UNCLAIMED description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f5e00000-f5e03fff that command displayed output name of the two cards . but , still i have no positive output on $aplay -l. so therfore, i think alsa couldn't detect my sound cards . is there solution to this problem? it could be better,if alsa would channel output from multiple sound cards ? how should install and configure alsa such that detects HDMI cable as soon i connect to my HD tv? is it possible to alsa and pluseaudio 2.0 to co-exist, if so how?

    Read the article

  • A Disk Read Error Occured. Press CTRL+ALT+DEL to restart

    - by darroosh
    I'm new to linux world. Just downloaded ubuntu and installed it alongside with windows 7 . In grub when I choose ubuntu, it opens with no problem, but when I try to open windows 7, this message appears: A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I googled for that problem which directed me to download a boot repair tool, when I choose : advanced options / retore MBR --> apply, then restart computer , It boot to win 7 without loading the grub menu. then I opened the live ubuntu from a USB, launched the "boot repair" again, choose : recommended repair , then restart, It returns to the first problem , grub menu appear, from which I can choose only ubuntu , but win 7 show this msg again : A Disk Read Error Occured. Press CTRL+ALT+DEL to restart. I repeated more and more with the same results ... What should I do? I created a boot info summary using the "boot repair tool" if this can help , it's in this URL.

    Read the article

  • Is Your ASP.NET Development Server Not Working?

    - by Paulo Morgado
    Since Visual Studio 2005, Visual Studio comes with a development web server: the ASP.NET Development Server. I’ve been using this web server for simple test projects since than with Visual Studio 2005 and Visual Studio 2008 in Windows XP Professional on my work laptop and Windows XP Professional, Windows Vista 64bit Ultimate and Windows 7 64bit Ultimate at my home desktop without any problems (apart the known custom identity problem, that is). When I received my new work laptop, I installed Windows Vista 64bit Enterprise and Visual Studio 2008 and, for my surprise, the ASP.NET Development Server wasn’t working. I started looking for differences between the laptop environment and the desktop environment and the most notorious differences were: System Laptop Desktop SKU Windows Vista 64bit Enterprise Windows Vista 64bit Ultimate Joined to a Domain Yes No Anti-Virus McAffe ESET After asserting that no domain policies were being applied to my laptop and domain user and nothing was being logged by the ant-virus, my suspicions turned to the fact that the laptop was running an Enterprise SKU and the desktop was running an Ultimate SKU. After having problems with other applications I was sure that problem was the Enterprise SKU, but never found a solution to the problem. Because I wasn’t doing any web development at the time, I left it alone. After upgrading to Windows 7, the problem persisted but, because I wasn’t doing any web development at the time, once again, I left it alone. Now that I installed Visual Studio 2010 I had to solve this. After searching around forums and blogs that either didn’t offer an answer or offered very complicated workarounds that, sometimes, involved messing with the registry, I came to the conclusion that the solution is, in fact, very simple. When Windows Vista is installed, hosts file, according to this contains this definition: 127.0.0.1 localhost ::1 localhost This was not what I had on my laptop hosts file. What I had was this: #127.0.0.1 localhost #::1 localhost I might have changed it myself, but from the amount of people that I found complaining about this problem on Windows Vista, this was probably the way it was. The installation of Windows 7 leaves the hosts file like this: #127.0.0.1 localhost #::1 localhost And although the ASP.NET Development Server works fine on Windows 7 64bit Ultimate, on Windows 7 64bit Enterprise it needs to be change to this: 127.0.0.1 localhost ::1 localhost And I suspect it’s the same with Windows Vista 64bit Enterprise.

    Read the article

  • What to Do When Windows Won’t Boot

    - by Chris Hoffman
    You turn on your computer one day and Windows refuses to boot — what do you do? “Windows won’t boot” is a common symptom with a variety of causes, so you’ll need to perform some troubleshooting. Modern versions of Windows are better at recovering from this sort of thing. Where Windows XP might have stopped in its tracks when faced with this problem, modern versions of Windows will try to automatically run Startup Repair. First Things First Be sure to think about changes you’ve made recently — did you recently install a new hardware driver, connect a new hardware component to your computer, or open your computer’s case and do something? It’s possible the hardware driver is buggy, the new hardware is incompatible, or that you accidentally unplugged something while working inside your computer. The Computer Won’t Power On At All If your computer won’t power on at all, ensure it’s plugged into a power outlet and that the power connector isn’t loose. If it’s a desktop PC, ensure the power switch on the back of its case — on the power supply — is set to the On position. If it still won’t power on at all, it’s possible you disconnected a power cable inside its case. If you haven’t been messing around inside the case, it’s possible the power supply is dead. In this case, you’ll have to get your computer’s hardware fixed or get a new computer. Be sure to check your computer monitor — if your computer seems to power on but your screen stays black, ensure your monitor is powered on and that the cable connecting it to your computer’s case is plugged in securely at both ends. The Computer Powers On And Says No Bootable Device If your computer is powering on but you get a black screen that says something like “no bootable device” or another sort of “disk error” message, your computer can’t seem to boot from the hard drive that Windows was installed on. Enter your computer’s BIOS or UEFI firmware setup screen and check its boot order setting, ensuring that it’s set to boot from its hard drive. If the hard drive doesn’t appear in the list at all, it’s possible your hard drive has failed and can no longer be booted from. In this case, you may want to insert Windows installation or recovery media and run the Startup Repair operation. This will attempt to make Windows bootable again. For example, if something overwrote your Windows drive’s boot sector, this will repair the boot sector. If the recovery environment won’t load or doesn’t see your hard drive, you likely have a hardware problem. Be sure to check your BIOS or UEFI’s boot order first if the recovery environment won’t load. You can also attempt to manually fix Windows boot loader problems using the fixmbr and fixboot commands. Modern versions of Windows should be able to fix this problem for you with the Startup Repair wizard, so you shouldn’t actually have to run these commands yourself. Windows Freezes or Crashes During Boot If Windows seems to start booting but fails partway through, you may be facing either a software or hardware problem. If it’s a software problem, you may be able to fix it by performing a Startup Repair operation. If you can’t do this from the boot menu, insert a Windows installation disc or recovery disk and use the startup repair tool from there. If this doesn’t help at all, you may want to reinstall Windows or perform a Refresh or Reset on Windows 8. If the computer encounters errors while attempting to perform startup repair or reinstall Windows, or the reinstall process works properly and you encounter the same errors afterwards, you likely have a hardware problem. Windows Starts and Blue Screens or Freezes If Windows crashes or blue-screens on you every time it boots, you may be facing a hardware or software problem. For example, malware or a buggy driver may be loading at boot and causing the crash, or your computer’s hardware may be malfunctioning. To test this, boot your Windows computer in safe mode. In safe mode, Windows won’t load typical hardware drivers or any software that starts automatically at startup. If the computer is stable in safe mode, try uninstalling any recently installed hardware drivers, performing a system restore, and scanning for malware. If you’re lucky, one of these steps may fix your software problem and allow you to boot Windows normally. If your problem isn’t fixed, try reinstalling Windows or performing a Refresh or Reset on Windows 8. This will reset your computer back to its clean, factory-default state. If you’re still experiencing crashes, your computer likely has a hardware problem. Recover Files When Windows Won’t Boot If you have important files that will be lost and want to back them up before reinstalling Windows, you can use a Windows installer disc or Linux live media to recover the files. These run entirely from a CD, DVD, or USB drive and allow you to copy your files to another external media, such as another USB stick or an external hard drive. If you’re incapable of booting a Windows installer disc or Linux live CD, you may need to go into your BIOS or UEFI and change the boot order setting. If even this doesn’t work — or if you can boot from the devices and your computer freezes or you can’t access your hard drive — you likely have a hardware problem. You can try pulling the computer’s hard drive, inserting it into another computer, and recovering your files that way. Following these steps should fix the vast majority of Windows boot issues — at least the ones that are actually fixable. The dark cloud that always hangs over such issues is the possibility that the hard drive or another component in the computer may be failing. Image Credit: Karl-Ludwig G. Poggemann on Flickr, Tzuhsun Hsu on Flickr     

    Read the article

  • Clustering for Mere Mortals (Pt2)

    - by Geoff N. Hiten
    Planning. I could stop there and let that be the entirety post #2 in this series.  Planning is the single most important element in building a cluster and the Laptop Demo Cluster is no exception.  One of the more awkward parts of actually creating a cluster is coordinating information between Windows Clustering and SQL Clustering.  The dialog boxes show up hours apart, but still have to have matching and consistent information. Excel seems to be a good tool for tracking these settings.  My workbook has four pages: Systems, Storage, Network, and Service Accounts.  The systems page looks like this:   Name Role Software Location East Physical Cluster Node 1 Windows Server 2008 R2 Enterprise Laptop VM West Physical Cluster Node 2 Windows Server 2008 R2 Enterprise Laptop VM North Physical Cluster Node 3 (Future Reserved) Windows Server 2008 R2 Enterprise Laptop VM MicroCluster Cluster Management Interface N/A Laptop VM SQL01 High-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL02 High-Performance Standard-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM SQL03 Standard-Performance High-Security Instance SQL Server 2008 Enterprise Edition x64 SP1 Laptop VM Note that everything that has a computer name is listed here, whether physical or virtual. Storage looks like this: Storage Name Instance Purpose Volume Path Size (GB) LUN ID Speed Quorum MicroCluster Cluster Quorum Quorum Q: 2     SQL01Anchor SQL01 Instance Anchor SQL01Anchor L: 2     SQL02Anchor SQL02 Instance Anchor SQL02Anchor M: 2     SQL01Data1 SQL01 SQL Data SQL01Data1 L:\MountPoints\SQL01Data1 2     SQL02Data1 SQL02 SQL Data SQL02Data1 M:\MountPoints\SQL02Data1       Starting at the left is the name used in the storage array.  It is important to rename resources at each level, whether it is Storage, LUN, Volume, or disk folder.  Otherwise, troubleshooting things gets complex and difficult.  You want to be able to glance at a resource at any level and see where it comes from and what it is connected to. Networking is the same way:   System Network VLAN  IP Subnet Mask Gateway DNS1 DNS2 East Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 East Heartbeat Cluster2   255.255.255.0       West Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 West Heartbeat Cluster2   255.255.255.0       North Public Cluster1 10.97.230.x(DHCP) 255.255.255.0 10.97.230.1 10.97.230.1 10.97.230.1 North Heartbeat Cluster2   255.255.255.0       SQL01 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       SQL02 Public Cluster1 10.97.230.x(DHCP) 255.255.255.0       One hallmark of a poorly planned and implemented cluster is a bunch of "Local Network Connection #n" entries in the network settings page.  That lets me know that somebody didn't care about the long-term supportabaility of the cluster.  This can be critically important with Hyper-V Clusters and their high NIC counts.  Final page:   Instance Service Name Account Password Domain OU SQL01 SQL Server SVCSQL01 Baseline22 MicroAD Service Accounts SQL01 SQL Agent SVCSQL01 Baseline22 MicroAD Service Accounts SQL02 SQL Server SVC_SQL02 Baseline22 MicroAD Service Accounts SQL02 SQL Agent SVC_SQL02 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Server SVC_SQL03 Baseline22 MicroAD Service Accounts SQL03 (Future) SQL Agent SVC_SQL03 Baseline22 MicroAD Service Accounts             Installation Account           administrator            Yes.  I write down the account information.  I secure the file via NTFS, but I don't want to fumble around looking for passwords when it comes time to rebuild a node. Always fill out the workbook COMPLETELY before installing anything.  The whole point is to have everything you need at your fingertips before you begin.  The install experience is so much better and more productive with this information in place.

    Read the article

  • Reinstall of Windows Bootloader not working

    - by MrBoxy
    It first started when I deleted my partition that had Ubuntu 12.04 on it. Little did I realize at the time that it would destroy all the resources of Grub on it, and subsequently prevent me booting into my hibernated windows. So I made a 12.10 Ubuntu live USB and reinstalled windows bootloader. When I rebooted it gave me a bootloader error saying I that it could not find the resources to boot from. So I went back to my live USB and installed boot-repair and tried to repair the mbr. It didn't work though. Here is the URL the boot-repair gave me if I was in trouble: paste.ubuntu.com/1328309 Thanks in advance :)

    Read the article

  • Windows doesn't boot after Ubuntu installation

    - by Diogo Garcia
    I have had serious problems installing Ubuntu and Windows and have dual boot. Recently I installed both operating systems, Ubuntu was the last one, and after that my computer was booting directly to Windows 7. I used my Ubuntu USB live to repair the grub, and could repair. Now I initiate my pc with grub 1.99 and Ubuntu and Windows are recognized, but Windows gives an error and don't initiate, suggesting to use Windows DVD to repair the grub. I tried that but with no effects on be behavior. I have a new asus n56vm. This conflicts with gpt and mbr have been a huge pain to me. I don't know what to to, I installed Ubuntu and Windows numerous times since I bought this computer 2 weeks ago.

    Read the article

  • Ubuntu 12.04 Boot Error

    - by Aman
    My Laptop was working just fine a day back but it started show the following error on booting: error: couldn't read file So, I googled about it and used a Live-CD to use Boot-Repair as told here: "can't read file" error after installation causes system to not boot I was given this link: http://paste.ubuntu.com/1441528/ if there are issues still. I also tried to do it again by a Boot-Repair-Disk this time and now I am getting the following error: error: couldn't read file error: you need to load the kernel first The boot-repair-disk gave me this link: http://paste2.org/p/2609703 if there are further issues.

    Read the article

  • Ubuntu missing from the Grub menu

    - by varevarao
    Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

    Read the article

  • Windows dont boot after Ubuntu installation

    - by Diogo Garcia
    I have had serious problems installing ubuntu and Windows and have dual boot. Recently i installed booth operating systems, ubuntu was the lastima one, and after that my computador was booting directly to Windows 7. I used my ubuntu USB live to repair the grub, and o could repair. Now i initiate my pc with grub 1.99 and ubuntu and Windows are recognized, but Windows gives an error and dont initiate, sugesting to use Windows DVD to repair the grub. I tried that but with no effects on be behavior. I have a new asus n56vm. This conflits with gpt and mbr have been a huge pain to me. I dont know what to to, i installed ubuntu and Windows inumerous times since i bought this cumputer 2 weeks ago. Best regards!

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >