Search Results

Search found 2390 results on 96 pages for 'morten green hermansen'.

Page 84/96 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Educause Top-Ten IT Issues - the most change in a decade or more

    - by user739873
    The Education IT Issue Panel has released the 2012 top-ten issues facing higher education IT leadership, and instead of the customary reshuffling of the same deck, the issues reflect much of the tumult and dynamism facing higher education generally.  I find it interesting (and encouraging) that at the top of this year's list is "Updating IT Professionals' Skills and Roles to Accommodate Emerging Technologies and Changing IT Management and Service Delivery Models."  This reflects, in my view, the realization that higher education IT must change in order to fully realize the potential for transforming the institution, and therefore it's people must learn new skills, understand and accept new ways of solving problems, and not be tied down by past practices or institutional inertia. What follows in the remaining 9 top issues all speak, in some form or fashion, to the need for dramatic change, but not just in the areas of "funding IT" (code for cost containment or reduction), but rather the need to increase effectiveness and efficiency of the institution through the use of technology—leveraging the wave of BYOD (Bring Your Own Device) to the institution's advantage, rather than viewing it as a threat and a problem to be contained. Although it's #10 of 10, IT Governance (and establishment and implementation of the governance model throughout the institution) is key to effectively acting upon many of the preceding issues in this year's list.  In the majority of cases, technology exists to meet the needs and requirements to effectively address many of the challenges outlined in top-ten issues list. Which brings me to my next point. Although I try not to sound too much like an Oracle commercial in these (all too infrequent) blog posts, I can't help but point out how much confluence there is between several of the top issues this year and what my colleagues and I have been evangelizing for some time. Starting from the bottom of the list up: 1) I'm gratified that research and the IT challenges it presents has made the cut.  Big Data (or Large Data as it's phased in the report) is rapidly going to overwhelm much of what exists today even at our most prepared and well-equipped research universities.  Combine large data with the significantly more stringent requirements around data preservation, archiving, sharing, curation, etc. coming from granting agencies like NSF, and you have the brewing storm that could result in a lot of "one-off" solutions to a problem that could very well be addressed collectively and "at scale."   2) Transformative effects of IT – while I see more and more examples of this, there is still much more that can be achieved. My experience tells me that culture (as the report indicates or at least poses the question) gets in the way more than technology not being up to task.  We spend too much time on "context" and not "core," and get lost in the weeds on the journey to truly transforming the institution with technology. 3) Analytics as a key element in improving various institutional outcomes.  In our work around Student Success, we see predictive "academic" analytics as essential to getting in front of the Student Success issue, regardless of how an institution or collections of institutions defines success.  Analytics must be part of the fabric of the key academic enterprise applications, not a bolt-on.  We will spend a significant amount of time on this topic during our semi-annual Education Industry Strategy Council meeting in Washington, D.C. later this month. 4) Cloud strategy for the broad range of applications in the academic enterprise.  Some of the recent work by Casey Green at the Campus Computing Survey would seem to indicate that there is movement in this area but mostly in what has been termed "below the campus" application areas such as collaboration tools, recruiting, and alumni relations.  It's time to get serious about sourcing elements of mature applications like student information systems, HR, Finance, etc. leveraging a model other than traditional on-campus custom. I've only selected a few areas of the list to highlight, but the unifying theme here (and this is where I run the risk of sounding like an Oracle commercial) is that these lofty goals cry out for partners that can bring economies of scale to bear on the problems married with a deep understanding of the nuances unique to higher education.  In a recent piece in Educause Review on Student Information Systems, the author points out that "best of breed is back". Unfortunately I am compelled to point out that best of breed is a large part of the reason we have made as little progress as we have as an industry in advancing some of the causes outlined above.  Don't confuse "integrated" and "full stack" for vendor lock-in.  The best-of-breed market forces that Ron points to ensure that solutions have to be "integratable" or they don't survive in the marketplace. However, by leveraging the efficiencies afforded by adopting solutions that are pre-integrated (and possibly metered out as a service) allows us to shed unnecessary costs – as difficult as these decisions are to make and to drive throughout the organization. Cole

    Read the article

  • Specs, Form and Function – What am I Missing?

    - by Barry Shulam
    0 0 1 628 3586 08041 29 8 4206 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Friday October 26th the Microsoft Surface RT arrived at the office.  I was summoned to my boss’s office for the grand unpacking.  If I had planned ahead I could have used my iPhone 4 to film the event and post it on YouTube however the desire to hold the device and turn it ON was more inviting than becoming a proxy reviewer for Engadget’s website.  1980 was the first time we had a personal computer in our house.  It was a  Kaypro computer. It weighed 29 pounds more than any persons lap could hold.  Then the term “portable computer” meant you could remove it from the building and take it else where.  Today I am typing on this entry on a Macbook Air which weighs 2.38 pounds. This morning Amazons front page main title is: “Much More for Much Less” I was born at the right time to start with the CPM operating system on the Kaypro thru the DOS, Windows, Linux, Mac OSX and mobile phone operating systems and languages.  If you are not aware Technology is moving at a rapid pace.  The New iPad (those who are keeping score – iPad4) is replacing a 7 month old machine the New iPad (iPad 3) I have used and owned many technology devices in my life.  The main point that most of the reader who are in the USA overlook is the fact that we are in the USA.  The devices we purchase have a great digital garden to support them.  The Kaypro computer had a 7-inch screen.  It was a TV tube with two colors – Black and Green.  You could see the 80-column screen flicker with characters – have you every played Pac-Man emulated on the screen with the ABC characters. Traveling across the world you will find that not all apps on your device will function as they did back home because they are not offered outside of your country of origin. I think the main question a buyer of technology should be asking is Function.  The greatest Specs with out function limit you.  The most beautiful form with out function is the same as a crystal vase on your shelf – not a good cereal bowl in the morning. Microsoft Surface RT, Amazon Kindle Fire and Apple iPad all great devices in their respective customers hands. My advice for those looking to purchase on this year:  If the device is your only technology device you buy what you WANT and LIKE. Consider this parallel universe if its not your only device?  Ever go shopping for clothing, shoes, and accessories with your wife, girlfriend, sister or mother?  If you listen carefully you will hear the little voices coming out of there heads saying:  “This goes well with that and I can use it also with that outfit” ”Do you think this clashes with that?”  “Ohh I love how that combination looks on you”.  Portable devices such as tablets and computers can offer a whole lot more when they are combined with the digital echo system you have at home and the manufacturer offers online. Pros of each Device: Microsoft Surface RT: There is a new functionality named SmartGlass which will let you share the content off your tablet to your XBOX 360.  Microsoft office is loaded on the tablet.  You can have more than one user profile on the tablet if you share it with others.   Amazon Kindle or Kindle HD: If you are an Amazon consumer with an annual Amazon Prime service you can consume videos and read books off the Amazon site.  Its the cheapest device.  Its a step up from the kindle reader in many ways.   Apple Ipad or Ipad mini: Over 270 Thousand applications.  Airplay permits you the ability to share to your TV screen. If you are a cord cutter (a person who gets their entertainment content over the web or air vs Cable Providers) the Airplay or Smart glass are a huge bonus.  iPad mini or not: The mini will fit in a purse where the larger one will not.  Its lighter which makes it nice to hold for prolonged periods.  It has an option for LTE wireless which non of the other sub 9 inch tables offer.  The screen is non retina which means the applications are smaller.  Speaking with individuals who are above 50 in age that wear glasses they retina does not make a difference for them however they prefer the larger iPad over the new mini.   Happy Shopping this Channuka Season.   The Kosher Coder.   Follow me on twitter @KosherCoder

    Read the article

  • Stepping outside Visual Studio IDE [Part 1 of 2] with Eclipse

    - by mbcrump
    “If you're walking down the right path and you're willing to keep walking, eventually you'll make progress." – Barack Obama In my quest to become a better programmer, I’ve decided to start the process of learning Java. I will be primary using the Eclipse Language IDE. I will not bore you with the history just what is needed for a .NET developer to get up and running. I will provide links, screenshots and a few brief code tutorials. Links to documentation. The Official Eclipse FAQ’s Links to binaries. Eclipse IDE for Java EE Developers the Galileo Package (based on Eclipse 3.5 SR2)  Sun Developer Network – Java Eclipse officially recommends Java version 5 (also known as 1.5), although many Eclipse users use the newer version 6 (1.6). That's it, nothing more is required except to compile and run java. Installation Unzip the Eclipse IDE for Java EE Developers and double click the file named Eclipse.exe. You will probably want to create a link for it on your desktop. Once, it’s installed and launched you will have to select a workspace. Just accept the defaults and you will see the following: Lets go ahead and write a simple program. To write a "Hello World" program follow these steps: Start Eclipse. Create a new Java Project: File->New->Project. Select "Java" in the category list. Select "Java Project" in the project list. Click "Next". Enter a project name into the Project name field, for example, "HW Project". Click "Finish" Allow it to open the Java perspective Create a new Java class: Click the "Create a Java Class" button in the toolbar. (This is the icon below "Run" and "Window" with a tooltip that says "New Java Class.") Enter "HW" into the Name field. Click the checkbox indicating that you would like Eclipse to create a "public static void main(String[] args)" method. Click "Finish". A Java editor for HW.java will open. In the main method enter the following line.      System.out.println("This is my first java program and btw Hello World"); Save using ctrl-s. This automatically compiles HW.java. Click the "Run" button in the toolbar (looks like a VCR play button). You will be prompted to create a Launch configuration. Select "Java Application" and click "New". Click "Run" to run the Hello World program. The console will open and display "This is my first java program and btw Hello World". You now have your first java program, lets go ahead and make an applet. Since you already have the HW.java open, click inside the window and remove all code. Now copy/paste the following code snippet. Java Code Snippet for an applet. 1: import java.applet.Applet; 2: import java.awt.Graphics; 3: import java.awt.Color; 4:  5: @SuppressWarnings("serial") 6: public class HelloWorld extends Applet{ 7:  8: String text = "I'm a simple applet"; 9:  10: public void init() { 11: text = "I'm a simple applet"; 12: setBackground(Color.GREEN); 13: } 14:  15: public void start() { 16: System.out.println("starting..."); 17: } 18:  19: public void stop() { 20: System.out.println("stopping..."); 21: } 22:  23: public void destroy() { 24: System.out.println("preparing to unload..."); 25: } 26:  27: public void paint(Graphics g){ 28: System.out.println("Paint"); 29: g.setColor(Color.blue); 30: g.drawRect(0, 0, 31: getSize().width -1, 32: getSize().height -1); 33: g.setColor(Color.black); 34: g.drawString(text, 15, 25); 35: } 36: } The Eclipse IDE should look like Click "Run" to run the Hello World applet. Now, lets test our new java applet. So, navigate over to your workspace for example: “C:\Users\mbcrump\workspace\HW Project\bin” and you should see 2 files. HW.class java.policy.applet Create a HTML page with the following code: 1: <HTML> 2: <BODY> 3: <APPLET CODE=HW.class WIDTH=200 HEIGHT=100> 4: </APPLET> 5: </BODY> 6: </HTML> Open, the HTML page in Firefox or IE and you will see your applet running.  I hope this brief look at the Eclipse IDE helps someone get acquainted with Java Development. Even if your full time gig is with .NET, it will not hurt to have another language in your tool belt. As always, I welcome any suggestions or comments.

    Read the article

  • Microsoft BUILD 2013 Day 1&ndash;Keynote

    - by Tim Murphy
    Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer.  He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates.  His quote was that “Rapid release” is the new norm.  He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect.  This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”.  This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps.  The three new ones were Flipboard, Facebook and NFL Fantasy Football.  I liked the first two because these are ones that people coming from other platforms are missing.  The NFL app is great just because it targets a demographic that can be fanatical.  If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix.  This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view.  Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints.  She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience.  I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone.  The consistency is a big step forward that I hope to see continue.  The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One.  This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API.  How that can be or how anyone would ever use all of them is another question.  His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits.  One of the features of VS2013 that he demonstrated is the power consumption profiler.  With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though.  He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically.  The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot.  Oh, but there was one more thing.  Antoine and Julie announce that all attendees would also be getting Surface Pros.  BONUS! How much more could there be?  Gurdeep Singh Pall was about to pile on.  He introduced us to Bing as a platform (BaaP?).  He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced.  These included natural user interface improvements such as voice commands that looked to put Siri to shame.  Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing.  Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One.  All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw.  What could they have possibly left for the day 2 keynote?  I hear it will feature Scott Hanselman.  If that is right we are in for a treat.  See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

    Read the article

  • A*, Tile costs and heuristic; How to approach

    - by Kevin Toet
    I'm doing exercises in tile games and AI to improve my programming. I've written a highly unoptimised pathfinder that does the trick and a simple tile class. The first problem i ran into was that the heuristic was rounded to int's which resulted in very straight paths. Resorting a Euclidian Heuristic seemed to fixed it as opposed to use the Manhattan approach. The 2nd problem I ran into was when i tried added tile costs. I was hoping to use the value's of the flags that i set on the tiles but the value's were too small to make the pathfinder consider them a huge obstacle so i increased their value's but that breaks the flags a certain way and no paths were found anymore. So my questions, before posting the code, are: What am I doing wrong that the Manhatten heuristic isnt working? What ways can I store the tile costs? I was hoping to (ab)use the enum flags for this The path finder isnt considering the chance that no path is available, how do i check this? Any code optimisations are welcome as I'd love to improve my coding. public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map ) { return FindPath( startTile, endTile, map, TileFlags.WALKABLE ); } public static List<Tile> FindPath( Tile startTile, Tile endTile, Tile[,] map, TileFlags acceptedFlags ) { List<Tile> open = new List<Tile>(); List<Tile> closed = new List<Tile>(); open.Add( startTile ); Tile tileToCheck; do { tileToCheck = open[0]; closed.Add( tileToCheck ); open.Remove( tileToCheck ); for( int i = 0; i < tileToCheck.neighbors.Count; i++ ) { Tile tile = tileToCheck.neighbors[ i ]; //has the node been processed if( !closed.Contains( tile ) && ( tile.flags & acceptedFlags ) != 0 ) { //Not in the open list? if( !open.Contains( tile ) ) { //Set G int G = 10; G += tileToCheck.G; //Set Parent tile.parentX = tileToCheck.x; tile.parentY = tileToCheck.y; tile.G = G; //tile.H = Math.Abs(endTile.x - tile.x ) + Math.Abs( endTile.y - tile.y ) * 10; //TODO omg wtf and other incredible stories tile.H = Vector2.Distance( new Vector2( tile.x, tile.y ), new Vector2(endTile.x, endTile.y) ); tile.Cost = tile.G + tile.H + (int)tile.flags; //Calculate H; Manhattan style open.Add( tile ); } //Update the cost if it is else { int G = 10;//cost of going to non-diagonal tiles G += map[ tile.parentX, tile.parentY ].G; //If this path is shorter (G cost is lower) then change //the parent cell, G cost and F cost. if ( G < tile.G ) //if G cost is less, { tile.parentX = tileToCheck.x; //change the square's parent tile.parentY = tileToCheck.y; tile.G = G;//change the G cost tile.Cost = tile.G + tile.H + (int)tile.flags; // add terrain cost } } } } //Sort costs open = open.OrderBy( o => o.Cost).ToList(); } while( tileToCheck != endTile ); closed.Reverse(); List<Tile> validRoute = new List<Tile>(); Tile currentTile = closed[ 0 ]; validRoute.Add( currentTile ); do { //Look up the parent of the current cell. currentTile = map[ currentTile.parentX, currentTile.parentY ]; currentTile.renderer.material.color = Color.green; //Add tile to list validRoute.Add( currentTile ); } while ( currentTile != startTile ); validRoute.Reverse(); return validRoute; } And my Tile class: [Flags] public enum TileFlags: int { NONE = 0, DIRT = 1, STONE = 2, WATER = 4, BUILDING = 8, //handy WALKABLE = DIRT | STONE | NONE, endofenum } public class Tile : MonoBehaviour { //Tile Properties public int x, y; public TileFlags flags = TileFlags.DIRT; public Transform cachedTransform; //A* properties public int parentX, parentY; public int G; public float Cost; public float H; public List<Tile> neighbors = new List<Tile>(); void Awake() { cachedTransform = transform; } }

    Read the article

  • NDepend Evaluation: Part 3

    - by Anthony Trudeau
    NDepend is a Visual Studio add-in designed for intense code analysis with the goal of high code quality. NDepend uses a number of metrics and aggregates the data in pleasing static and active visual reports. My evaluation of NDepend will be broken up into several different parts. In the first part of the evaluation I looked at installing the add-in.  And in the last part I went over my first impressions including an overview of the features.  In this installment I provide a little more detail on a few of the features that I really like. Dependency Matrix The dependency matrix is one of the rich visual components provided with NDepend.  At a glance it lets you know where you have coupling problems including cycles.  It does this with number indicating the weight of the dependency and a color-coding that indicates the nature of the dependency. Green and blue cells are direct dependencies (with the difference being whether the relationship is from row-to-column or column-to-row).  Black cells are the ones that you really want to know about.  These indicate that you have a cycle.  That is, type A refers to type B and type B also refers to Type A. But, that’s not the end of the story.  A handy pop-up appears when you hover over the cell in question.  It explains the color, the dependency, and provides several interesting links that will teach you more than you want to know about the dependency. You can double-click the problem cells to explode the dependency.  That will show the dependencies on a method-by-method basis allowing you to more easily target and fix the problem.  When you’re done you can click the back button on the toolbar. Dependency Graph The dependency graph is another component provided.  It’s complementary to the dependency matrix, but it isn’t as easy to identify dependency issues using the window. On a positive note, it does provide more information than the matrix. My biggest issue with the dependency graph is determining what is shown.  This was not readily obvious.  I ended up using the navigation buttons to get an acceptable view.  I would have liked to choose what I see. Once you see the types you want you can get a decent idea of coupling strength based on the width of the dependency lines.  Double-arrowed lines are problematic and are shown in red.  The size of the boxes will be related to the metric being displayed.  This is controlled using the Box Size drop-down in the toolbar.  Personally, I don’t find the size of the box to be helpful, so I change it to Constant Font. One nice thing about the display is that you can see the entire path of dependencies when you hover over a type.  This is done by color-coding the dependencies and dependants.  It would be nice if selecting the box for the type would lock the highlighting in place. I did find a perhaps unintended work-around to the color-coding.  You can lock the color-coding in by hovering over the type, right-clicking, and then clicking on the canvas area to clear the pop-up menu.  You can then do whatever with it including saving it to an image file with the color-coding. CQL NDepend uses a code query language (CQL) to work with your code just like it was a database.  CQL cannot be confused with the robustness of T-SQL or even LINQ, but it represents an impressive attempt at providing an expressive way to enumerate and interrogate your code. There are two main windows you’ll use when working with CQL.  The CQL Query Explorer allows you to define what queries (rules) are run as part of a report – I immediately unselected rules that I don’t want in my results.  The CQL Query Edit window is where you can view or author your own rules.  The explorer window is pretty self-explanatory, so I won’t mention it further other than to say that any queries you author will appear in the custom group. Authoring your own queries is really hard to screw-up.  The Intellisense-like pop-ups tell you what you can do while making composition easy.  I was able to create a query within two minutes of playing with the editor.  My query warns if any types that are interfaces don’t start with an “I”. WARN IF Count > 0 IN SELECT TYPES WHERE IsInterface AND !NameLike “I” The results from the CQL Query Edit window are immediate. That fact makes it useful for ad hoc querying.  It’s worth mentioning two things that could make the experience smoother.  First, out of habit from using Visual Studio I expect to be able to scroll and press Tab to select an item in the list (like Intellisense).  You have to press Enter when you scroll to the item you want.  Second, the commands are case-sensitive.  I don’t see a really good reason to enforce that. CQL has a lot of potential not just in enforcing code quality, but also enforcing architectural constraints that your enterprise has defined. Up Next My next update will be the final part of the evaluation.  I will summarize my experience and provide my conclusions on the NDepend add-in. ** View Part 1 of the Evaluation ** ** View Part 2 of the Evaluation ** Disclaimer: Patrick Smacchia contacted me about reviewing NDepend. I received a free license in return for sharing my experiences and talking about the capabilities of the add-in on this site. There is no expectation of a positive review elicited from the author of NDepend.

    Read the article

  • Profiling Startup Of VS2012 &ndash; YourKit Profiler

    - by Alois Kraus
    The YourKit (v7.0.5) profiler is interesting in terms of price (79€ single place license, 409€ + 1 year support and upgrades) and feature set. You do get a performance and memory profiler in one package for which you normally need also to pay extra from the other vendors. As an interesting side note the profiler UI is written in Java because they do also sell Java profilers with the same feature set. To get all methods of a VS startup you need first to configure it to include System* in the profiled methods and you need to configure * to measure wall clock time. By default it does record only CPU times which allows you to optimize CPU hungry operations. But you will never see a Thread.Sleep(10000) in the profiler blocking the UI in this mode. It can profile as all others processes started from within the profiler but it can also profile the next or all started processes. As usual it can profile in sampling and tracing mode. But since it is a memory profiler as well it does by default also record all object allocations > 1MB. With allocation recording enabled VS2012 did crash but without allocation recording there were no problems. The CPU tab contains the time line of the application and when you click in the graph you the call stacks of all threads at this time. This is really a nice feature. When you select a time region you the CPU Usage estimation for this time window. I have seen many applications consuming 100% CPU only because they did create garbage like crazy. For this is the Garbage Collection tab interesting in conjunction with a time range. This view is like the CPU table only that the CPU graph (green) is missing. All relevant information except for GCs/s is already visible in the CPU tab. Very handy to pinpoint excessive GC or CPU bound issues. The Threads tab does show the thread names and their lifetime. This is useful to see thread interactions or which thread is hottest in terms of CPU consumption. On the CPU tab the call tree does exist in a merged and thread specific view. When you click on a method you get below a list of all called methods. There you can sort for methods with a high own time which are worth optimizing. In the Method List you can select which scope you want to see. Back Traces are the methods which did call you. Callees ist the list of methods called directly or indirectly by your method as a flat list. This is not a call stack but still very useful to see which methods were slow so you can see the “root” cause quite quickly without the need to click trough long call stacks. The last view Merged Calles is a call stacked view of the previous view. This does help a lot to understand did call each method at run time. You would get the same view with a debugger for one call invocation but here you get the full statistics (invocation count) as well. Since YourKit is also a memory profiler you can directly see which objects you have on your managed heap and which objects do hold most of your precious memory. You can in in the Object Explorer view also examine the contents of your objects (strings or whatsoever) to get a better understanding which objects where potentially allocating this stuff.   YourKit is a very easy to use combined memory and performance profiler in one product. The unbeatable single license price makes it very attractive to straightly buy it. Although it is a Java UI it is very responsive and the memory consumption is considerably lower compared to dotTrace and ANTS profiler. What I do really like is to start the YourKit ui and then start the processes I want to profile as usual. There is no need to alter your own application code to be able to inject a profiler into your new started processes. For performance and memory profiling you can simply select the process you want to investigate from the list of started processes. That's the way I like to use profilers. Just get out of the way and let the application run without any special preparations.   Next: Telerik JustTrace

    Read the article

  • Is your dream an international experience?

    - by Maria Sandu
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Studying in Poland, having two summer jobs in England, doing one internship in India, working in Thailand for half a year and now working in Prague. Does it seem an adventure? Well it is and I will tell you how I came to have this international experience. Dzien Dobry! My name is Wojciech Jurojc, I am Polish and I am currently a Business Development Consultant within Oracle, based in Prague. I joined Oracle on the 1st of August 2011. I graduated in 2010 and obtained 2 Masters Degrees in Political Science and Economics. I would like to tell you more about my past and how I joined Oracle. In 2005 I began studying at the Faculty of Political Sciences Gdansk University. In 2008, I obtained a Bachelors Degree. During these three years I had the opportunity to go to England twice, where I worked as a Bartender, first in Blackpool and then in Manchester. This allowed me to improve my language skills and become more confident. In the meantime, I joined the International Student Organization-AIESEC, where I was organized conferences and conducted student projects. Also I met a mass of interesting people from around the world. After graduation in 2008, I was able to get an Internship within a big company in Poland. I worked there as an Intern in the Purchase Department. That was my first adventure within a corporate environment. I learnt a lot about purchasing processes and negotiations. In September 2008, I started studying two Masters Faculties: Political Science and Economics. It was very difficult, but it was not impossible. Over the next two years of studying I was able to go on a three month internship to India where I worked as a Marketing Assistant in an NGO. I was travelling around northern India and did presentations to the academic community about green energy and environmental projects. I had the opportunity to visit Nepal and walked in the Himalayas. That was a huge experience as well as a cultural shock. It taught me how to deal with many problems and to appreciate what I have. At the end of 2009 I was working as a Marketing Assistant for a Leasing company, where I learnt useful sales knowledge and improved my objection handling skills. In July 2010, I graduated with a double Masters and found a job in Thailand as Sales Representative in an IT company. I worked in Thailand until the end of January 2011. Besides that, I was working in an International company with interesting people and I had the opportunity to travel around Thailand and visit Cambodia. After this adventure I started looking for jobs in Europe where I could further develop my sales skills. I found Oracle and I don’t regret this decision which I made. I am currently working in Prague in an international Hardware team and I know that is not the end of my adventures. At this moment, I am working in a team of 12 members. Ten of them are based in Prague and 2 others are based in Russia. We come from different countries such as: Czech Republic, Russia, Ukraine, Turkey, Slovakia and Kazakhstan. I am working on the Polish market, cooperating with our Hardware customers and partners. What do I enjoy the most about my job? I enjoy every challenge that I face in my daily activities as there are always new experiences for me and new things that I learn. As part of Oracle, I gain international exposure and therefore more career opportunities to explore. I have planned my next step for the career path I dream of and I am currently working on it. I recommend you check our Career Page if you’re looking for an international career. If you want to find out more about our job opportunities, follow us on https://campus.oracle.com .

    Read the article

  • No More NCrunch For Me

    - by Steve Wilkes
    When I opened up Visual Studio this morning, I was greeted with this little popup: NCrunch is a Visual Studio add-in which runs your tests while you work so you know if and when you've broken anything, as well as providing coverage indicators in the IDE and coverage metrics on demand. It recently went commercial (which I thought was fair enough), and time is running out for the free version I've been using for the last couple of months. From my experiences using NCrunch I'm going to let it expire, and go about my business without it. Here's why. Before I start, let me say that I think NCrunch is a good product, which is to say it's had a positive impact on my programming. I've used it to help test-drive a library I'm making right from the start of the project, and especially at the beginning it was very useful to have it run all my tests whenever I made a change. The first problem is that while that was cool to start with, it’s recently become a bit of a chore. Problems Running Tests NCrunch has two 'engine modes' in which it can run tests for you - it can run all your tests when you make a change, or it can figure out which tests were impacted and only run those. Unfortunately, it became clear pretty early on that that second option (which is marked as 'experimental') wasn't really working for me, so I had to have it run everything. With a smallish number of tests and while I was adding new features that was great, but I've now got 445 tests (still not exactly loads) and am more in a 'clean and tidy' mode where I know that a change I'm making will probably only affect a particular subset of the tests. With that in mind it's a bit of a drag sitting there after I make a change and having to wait for NCrunch to run everything. I could disable it and manually run the tests I know are impacted, but then what's the point of having NCrunch? If the 'impacted only' engine mode worked well this problem would go away, but that's not what I found. Secondly, what's wrong with this picture? I've got 445 tests, and NCrunch has queued 455 tests to run. So it's queued duplicate tests - in this quickly-screenshotted case 10, but I've seen the total queue get up over 600. If I'm already itchy waiting for it to run all my tests against a change I know only affects a few, I'm even itchier waiting for it to run a lot of them twice. Problems With Code Coverage NCrunch marks each line of code with a dot to say if it's covered by tests - a black dot says the line isn't covered, a red dot says it's covered but at least one of the covering tests is failing, and a green dot means all the covering tests pass. It also calculates coverage statistics for you. Unfortunately, there's a couple of flaws in the coverage. Firstly, it doesn't support ExcludeFromCodeCoverage attributes. This feature has been requested and I expect will be included in a later release, but right now it doesn't. So this: ...is counted as a non-covered line, and drags your coverage statistics down. Hmph. As well as that, coverage of certain types of code is missed. This: ...is definitely covered. I am 100% absolutely certain it is, by several tests. NCrunch doesn't pick it up, down go my coverage statistics. I've had NCrunch find genuinely uncovered code which I've been able to remove, and that's great, but what's the coverage percentage on this project? Umm... I don't know. Conclusion None of these are major, tool-crippling problems, and I expect NCrunch to get much better in future releases. The current version has some great features, like this: ...that's a line of code with a failing test covering it, and NCrunch can run that failing test and take me to that line exquisitely easily. That's awesome! I'd happily pay for a tool that can do that. But here's the thing: NCrunch (currently) costs $159 (about £100) for a personal licence and $289 (about £180) for a commercial one. I'm not sure which one I'd need as my project is a personal one which I'm intending to open-source, but I'm a professional, self-employed developer, but in any case - that seems like a lot of money for an imperfect tool. If it did everything it's advertised to do more or less perfectly I'd consider it, but it doesn't. So no more NCrunch for me.

    Read the article

  • BizTalk: namespaces

    - by Leonid Ganeline
    BizTalk team did a good job hiding the .NET guts from developers. Developers are working with editors and hardly with .NET code. The Orchestration editor, the Mapper, the Schema editor, the Pipeline editor, all these editors hide what is going on with artifacts created and deployed. Working with the BizTalk artifacts year after year brings us some knowledge which could help to understand more about the .NET guts. I would like to highlight the .NET namespaces. What they are, how they influence our everyday tasks in the BizTalk application development. What is it? Most of the BizTalk artifacts are compiled into the NET classes. Not all of them… but I will show you later. Classes are placed inside the namespaces. I will not describe here why we need namespaces and what is it. I assume you all know about it more then me. Here I would like to emphasize that almost each BizTalk artifact is implemented as a .NET class within a .NET namespace. Where to see the namespaces in development? The namespaces are inconsistently spread across the artifact parameters. Let’s start with namespace placement in development. Then we go with namespaces in deployment and operations. I am using pictures from the BizTalk Server 2013 Beta and the Visual Studio 2012 but there was no changes regarding the namespaces starting from the BizTalk 2006. Default namespace When a new BizTalk project is created, the default namespace is set up the same as a name of a project. This namespace would be used for all new BizTalk artifacts added to this project. Orchestrations When we select a green or a red markers (the Begin and End orchestration shapes) we will see the orchestration Properties window. We also can click anywhere on the space between Port Surfaces to see this window.   Schemas The only way to see the NET namespace for map is selecting the schema file name into the Solution Explorer. Notes: We can also see the Type Name parameter. It is a name of the correspondent .NET class. We can also see the Fully Qualified Name parameter. We cannot see the schema namespace when selecting any node on the schema editor surface. Only selecting a schema file name gives us a namespace parameter. If we select a <Schema> node we can get the Target Namespace parameter of the schema. This is NOT the .NET namespace! It is an XML namespace. See this XML namespace inside the XML schema, it is shown as a special targetNamespace attribute Here this XML namespace appears inside the XML document itself. It is shown as a special xmlns attribute.   Maps It is similar to the schemas. The only way to see the NET namespace for map is selecting a map file name into the Solution Explorer. Pipelines It is similar to the schemas. The only way to see the NET namespace for pipeline is selecting a pipeline file name into the Solution Explorer. z Ports, Policies and Tracking Profiles The Send and Receive Ports, the Policies and the BAM Tracking Profiles do not create the .NET classes and they do not have the associated .NET namespaces. How to copy artifacts? Since the new versions of the BizTalk Server are going to production I am spending more and more time redesigning and refactoring the BizTalk applications. It is good to know how the refactoring process copes with the .NET namespaces. Let see what is going on with the namespaces when we copy the artifacts from one project to another. Here is an example: I am going to group the artifacts under the project folders. So, I have created a Group folder, have run the Add / Existing Item.. command and have chosen all artifacts in the project root. The artifact copies were created in the Group folder: What was happened with the namespaces of the artifacts? As you can see, the folder name, the “Group”, was added to the namespace. It is great! When I added a folder, I have added one more level in the name hierarchy and the namespace change just reflexes this hierarchy change.  The same namespace adjustment happens when we copy the BizTalk artifacts between the projects. But there is an issue with the namespace of an orchestration. It was not changed. The namespaces of the schemas, maps, pipelines are changed but not the orchestration namespace. I have to change the orchestration namespace manually. Now another example: I am creating a new Project folder and moving the artifacts there from the project root by drag and drop. We will mention the artifact namespaces are not changed. Another example: I am copying the artifacts from the project root by (drag and drop) + Ctrl. We will mention the artifact namespaces are changed. It works exactly as it was with the Add / Existing Item.. command. Conclusion: The namespace parameter is put inconsistently in different places for different artifacts Moving artifacts changes the namespaces of the schemas, maps, pipelines but not the orchestrations.

    Read the article

  • Doing TDD Silverlight 4 RC using Visual Studio 2010 RC

    - by user133992
    First I am glad to see better TDD support in VS2010. Support for generating code stubs from my tests is ok - not as good as more mature TDD plug-ins but a good start. I am looking for some best Silverlight 4.0 TDD practices. First Question: Anyone have links, recommendations? I know the new Silverlight Unit Test capabilities are much better (Jeff Wilcox's Mix Presentation). What I am focusing on right now is using TDD to develop pure Silverlight 4.0 Class Library projects - projects without a Silverlight UI project. I've been able to get it to work but not as cleanly as it should be. I can create an Empty VS project. Add A Silverlight 4 Class Library Project. Add a TestProject (not a silverlight Unit Test Project but a plain Test Project). Add a simple test in the Test Project such as: namespace Calculator.Test { [TestClass] public class CalculatorTests { [TestMethod] public void CalulatorAddTest() { Calc c = new Calc(); int expected = 10; int actual = c.Add(6, 4); Assert.AreEqual<int>(expected, actual); } } } Using the new Generate Type and Method from Test feature it will generate the following code in the Silverlight Project: namespace Calculator { public class Calc { public int Add(int p, int p_2) { throw new NotImplementedException(); } } } When I run the tests the first time it says the target assembly is Silverlight and not able to run test - Not exact text but the same general idea. When I change the implementation to: namespace Calculator { public class Calc { public int Add(int p, int p_2) { return p + p_2; } } } and re-run the test, it works fine and the test goes green. It also works for all other TDD code I generate after. I also get a warning Mark in the Test Project's reference to the Calculator Silverlight Class Library Assembly. Second Question: Any comments ideas if this just a bug in VS2010 RC or is Silverlight Class Library TDD not really supported. I have not created a Silverlight UI project or changed and build or debug settings so I have no idea what is hosting the silverlight DLL. Finally, some of the Silverlight Class Libraries I need to write will provide functionality that requires elevated Out-Of-Browser rights. Based on the above, it looks like I can use TDD Test Projects against regular Silverlight 4.0 Class Libraries, but I have no idea how I can TDD the elevated OOB functionality without also creating the UI component that gets installed. The UI piece is not really needed for the Library development and gets in the way of what I actually want to TDD. I know I can (and will) mock some of that functionality but at some point I will also need the real thing in my tests. Third Question: Any ideas how to TDD Silverlight 4.0 Class Library project that requires OOB elevated rights? Thanks!

    Read the article

  • Wrap or adorn wpf listview datatemplate

    - by Chris Cap
    I'm attempting to essentially wrap the contents of a DateTemplate in a listview gridview column with a border. What I want to know is if it's possible to supply an adorner that will surround that template so that I don't have to specify the border in every single datatemplate on every column (which is what I'm doing now). I've got something like this, but I know it's not right <Style TargetType="{x:Type ListBoxItem}"> <Setter Property="TemplateContent"> <Setter.Value> <ControlTemplate> <StackPanel> <Border BorderBrush="Green" BorderThickness="1"> <AdornedElementPlaceholder /> </Border> </StackPanel> </ControlTemplate> </Setter.Value> </Setter> </Style> This complains that Templatecontent is not a valid type. I've also tried with DataTemplate and that doesn't work either (understandably so). I know I could just create a DataTemplate, however the content for each column is different. At the very least, it binds to different fields. I'm wondering if there's a solution using a dynamic resource, but I don't know much about it. Thanks for your help EDIT: here's a sample of my listview <ListView ItemsSource="{Binding Path=OrderLines}" ItemContainerStyle="{StaticResource ResourceKey=ListViewItemContainerStyle}"> <ListView.View> <GridView> <GridViewColumn> <GridViewColumn.CellTemplate> <DataTemplate> <TextBox MaxWidth="30" Width="30" MaxLength="2" Text="{Binding Path=Quantity,ValidatesOnDataErrors=True}" /> </DataTemplate> </GridViewColumn.CellTemplate> </GridViewColumn> <GridView> <ListView.View> </ListView> Essentially I want to wrap that text box in the data template and any other items in additional columns.

    Read the article

  • Silverlight 4.0 VisualStateManager

    - by xscape
    Can anyone please help me or is there anything I miss out? the visualstate is not triggered xmlns:swi="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:esi="clr-namespace:Expression.Samples.Interactivity;assembly=Expression.Samples.Interactivity" xmlns:mei="clr-namespace:Microsoft.Expression.Interactivity.Core;assembly=Microsoft.Expression.Interactions" <my:DataGridTemplateColumn IsReadOnly="True"> <my:DataGridTemplateColumn.CellTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <VisualStateManager.VisualStateGroups> <VisualStateGroup x:Name="vsgUrgency"> <VisualState x:Name="UrgencySerious"> <Storyboard> <ColorAnimation Storyboard.TargetName="orbUrgency" Storyboard.TargetProperty="Fill" To="Red"/> </Storyboard> </VisualState> <VisualState x:Name="UrgencyNormal"> <Storyboard> <ColorAnimation Storyboard.TargetName="orbUrgency" Storyboard.TargetProperty="Fill" To="Green"/> </Storyboard> </VisualState> </VisualStateGroup> </VisualStateManager.VisualStateGroups> <swi:Interaction.Triggers> <esi:DataTrigger Binding="{Binding Urgency}" Value="Serious"> <mei:GoToStateAction StateName="UrgencySerious"/> </esi:DataTrigger> <esi:DataTrigger Binding="{Binding Urgency}" Value="Normal"> <mei:GoToStateAction StateName="UrgencyNormal"/> </esi:DataTrigger> </swi:Interaction.Triggers> <TextBlock Text="{Binding Urgency}"/> <Path x:Name="orbUrgency" Width="14.6566" Height="14.5449" Stretch="Fill" StrokeThickness="1" StrokeLineJoin="Round" Fill="#FFE50A0A" Data="F1 M 9.3269,3.61737C 13.3742,3.61737 16.6552,6.87332 16.6552,10.8898C 16.6552,14.9063 13.3742,18.1623 9.3269,18.1623C 5.2796,18.1623 1.99862,14.9063 1.99862,10.8898C 1.99862,6.87332 5.27956,3.61737 9.3269,3.61737 Z "> </Path> </StackPanel> </DataTemplate> </my:DataGridTemplateColumn.CellTemplate> </my:DataGridTemplateColumn>

    Read the article

  • How to create StackedBarSeries with custom tooltip without losing standard colors

    - by Simon_Weaver
    I have a StackedBarSeries in Silverlight 4 charting (latest release). I have created a DataPointStyle called MyDataPointStyle for a custom tooltip. By itself this breaks the standard palette used for the different bars. I've applied a custom palette - as described in David Anson's blog to the chart. However when I have the DataPointStyle set for my SeriesDefinition objects it does not use this palette. I'm not sure what I'm missing - but David specifically says : ... it enables the use of DynamicResource (currently only supported by the WPF platform) to let users customize their DataPointStyle without inadvertently losing the default/custom Palette colors. (Note: A very popular request!) Unfortunately I'm inadvertently losing these colors - and I can't see why? <chartingToolkit:Chart.Palette> <dataviz:ResourceDictionaryCollection> <ResourceDictionary> <Style x:Key="DataPointStyle" TargetType="Control"> <Setter Property="Background" Value="Blue"/> </Style> </ResourceDictionary> <ResourceDictionary> <Style x:Key="DataPointStyle" TargetType="Control"> <Setter Property="Background" Value="Green"/> </Style> </ResourceDictionary> <ResourceDictionary> <Style x:Key="DataPointStyle" TargetType="Control"> <Setter Property="Background" Value="Red"/> </Style> </ResourceDictionary> </dataviz:ResourceDictionaryCollection> </chartingToolkit:Chart.Palette> <chartingToolkit:Chart.Series> <chartingToolkit:StackedBarSeries> <chartingToolkit:SeriesDefinition IndependentValueBinding="{Binding SKU}" DependentValueBinding="{Binding Qty}" DataPointStyle="{StaticResource MyDataPointStyle}" Title="Regular"/> <chartingToolkit:SeriesDefinition IndependentValueBinding="{Binding SKU}" DependentValueBinding="{Binding Qty}" DataPointStyle="{StaticResource MyDataPointStyle}" Title="FSP Orders"/> <chartingToolkit:StackedBarSeries.IndependentAxis> <chartingToolkit:CategoryAxis Title="SKU" Orientation="Y" FontStyle="Italic" AxisLabelStyle="{StaticResource LeftAxisStyle}"/> </chartingToolkit:StackedBarSeries.IndependentAxis> <chartingToolkit:StackedBarSeries.DependentAxis> <chartingToolkit:LinearAxis Orientation="X" ExtendRangeToOrigin="True" Minimum="0" ShowGridLines="True" /> </chartingToolkit:StackedBarSeries.DependentAxis> </chartingToolkit:StackedBarSeries > </chartingToolkit:Chart.Series> </chartingToolkit:Chart>

    Read the article

  • CGContextDrawPDFPage doesn't seem to persist in CGContext

    - by erichf
    I am trying to access the pixels of a CGContext written to with a PDF, but the bitmap buffer doesn't seem to update. Any help would be appreciated: //Get the reference to our current page pageRef = CGPDFDocumentGetPage(docRef, iCurrentPage); //Start with a media crop, but see if we can shrink to smaller crop CGRect pdfRect1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFMediaBox)); CGRect r1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFCropBox)); if (!CGRectIsEmpty(r1)) pdfRect1 = r1; int wide = pdfRect1.size.width + pdfRect1.origin.x; int high = pdfRect1.size.height + pdfRect1.origin.y; CGContextRef ctxBuffer = NULL; CGColorSpaceRef colorSpace; UInt8* bitmapData; int bitmapByteCount; int bitmapBytesPerRow; bitmapBytesPerRow = (wide * 4); bitmapByteCount = (bitmapBytesPerRow * high); colorSpace = CGColorSpaceCreateDeviceRGB(); bitmapData = malloc( bitmapByteCount ); if (bitmapData == NULL) { DebugLog (@"Memory not allocated!"); return; } ctxBuffer = CGBitmapContextCreate (bitmapData, wide, high, 8, // bits per component bitmapBytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); // if (ctxBuffer== NULL) { free (bitmapData); DebugLog (@"Context not created!"); return; } CGColorSpaceRelease( colorSpace ); //White out the current context CGContextSetRGBFillColor(ctxBuffer, 1.0, 1.0, 1.0, 1.0); CGContextFillRect(ctxBuffer, CGContextGetClipBoundingBox(ctxBuffer)); CGContextDrawPDFPage(ctxBuffer, pageRef); //!!!This displays just fine to the context passed in from - (void)drawLayer:(CALayer *)layer inContext:(CGContextRef)ctx. That is, I can see the PDf page rendered, so we know ctxBuffer was created correctly //However, if I view bitmapData in memory, it only shows as 0xFF (or whatever fill color I use) CGImageRef img = CGBitmapContextCreateImage(ctxBuffer); CGContextDrawImage(ctx, tiledLayer.frame, img); void *data = CGBitmapContextGetData (ctx); for (int i = 0; i < wide; i++) { for (int j = 0; j < high; j++) { //All of the bytes show as 0xFF (or whatever fill color I test with)?! int byteIndex = (j * 4) + i * 4; UInt8 red = bitmapData[byteIndex]; UInt8 green = bitmapData[byteIndex + 1]; UInt8 blue = bitmapData[byteIndex + 2]; UInt8 alpha = m_PixelBuf[byteIndex + 3]; } } I have also tried using CGDataProviderCopyData(CGImageGetDataProvider(img)) & CFDataGetBytePtr, but the results are the same?

    Read the article

  • click events issue in jquery.

    - by alex
    I don't know if the title explain this situation well. Below is a code i wrote to create div elements when the button is pressed. Then By clicking on any of the created divs, we can change the div background by choosing a color from the drop down box. However if i click on another div and tried to change the color by selecting another color from the drop down, the previously clicked divs also gets affected by the new color. Why is this happening. I only want the selected div to change color, without affecting the previously clicked divs. I read allot of threads on this site, some of which talks about unbinding clicks, but I'm unable to solve the problem. Thanks for the help. <script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js" type="text/javascript"></script> <style> .aaa { width:100px; height:100px;background-color:#ccc;margin-bottom:5px;} p{widht:500px; height:500px; margin:0px; padding:0px;border:2px solid red;color:#000;} </style> <select id="item_select" name="item"> <option value="1">red</option> <option value="2">blue</option> <option value="3">green</option> </select> <button>Click to create divs</button> <p id="ptest"></p> <script type="text/javascript"> var dividcount = 1; $("button").click(run); function run(){ var myDiv = $('<div id=lar'+dividcount+' class=aaa></div>'); $(myDiv).clone().appendTo('#ptest'); $(dividcount++); $("div").bind('click',(function() { var box = $("div").index(this); var idd = (this.id); $("#"+idd).text("div #"+idd); $("select").change(function(){ var str= $("select option:selected").text(); $("#"+idd).css("background-color",str); }); })); }; </script>

    Read the article

  • pyQt4: QWidget subclass not responding to new setStyleSheet() background colour

    - by Ronny
    I am having an issue with PyQt4. I want to create a new widget within a window, and I want this widget to have a custom color. When i create a subclass of the QWidget class, and instantiate it, I am not able to change its background color through the setStyleSheet() function. When I instantiate a new QWidget object, I have no problems in changing its background color. But i dont want an ordinary QWidget object.I want to create my own subclass of QWidget. When i create a subclass of a QPushButton, I am also able to change its background color using the setStyleSheet() function. There are no error messages or warnings in the console window, it just refuses to work properly without any indication as to why. So what i would like to know is why is it that i can change the background color of a widget if i simply create a QWidget object, or a subclass of QPushButton, but not when i create a subclass of QWidget. And how can i therefore change the background color of an object that is a subclass of QWidget? Is it maybe something specific to the version of python or PyQt that i am using? Is it a bug in the library? or some flaw in the way that i am writing my code? I am using python 2.6.4 and PyQt4 Below is an example of the code that leads me to trouble. There are three widgets within the window one below the other. The parent widget is set with background color of green. The top widget is set to red, the middle one, is the subclass of QWidget, which should be blue, but it appears invisible because it takes on the color of the parent window for some reason. and the bottom widget is a subclass of QPushButton and is white. import sys from PyQt4 import QtGui, QtCore ################################################################################ #--------------------------------------------------------- CUSTOM WIDGET CLASS 1 class CustomWidget(QtGui.QWidget): def __init__(self, parent): QtGui.QWidget.__init__(self, parent) # some custom properties and functions will follow ################################################################################ #--------------------------------------------------------- CUSTOM WIDGET CLASS 2 class CustomWidget2(QtGui.QPushButton): def __init__(self, parent): QtGui.QPushButton.__init__(self, parent) # some custom properties and functions will follow ################################################################################ #----------------------------------------------------------- PARENT WIDGET CLASS class Parent(QtGui.QWidget): def __init__(self, parent=None): #---------------------------------------------------------- SETUP WINDOW QtGui.QWidget.__init__(self, parent) self.resize(500, 340) self.setStyleSheet("QWidget {background-color: #00FF00}") #-------------------------------------------------- SETUP DEFAULT WIDGET wid1 = QtGui.QWidget(self) wid1.setGeometry(10, 10, 480, 100) wid1.setStyleSheet("QWidget {background-color: #FF0000 }") #------------------------------------------------- SETUP CUSTOM WIDGET 1 wid2 = CustomWidget(self) wid2.setGeometry(10, 120, 480, 100) wid2.setStyleSheet("QWidget {background-color: #0000FF }") for i in dir(wid2): print i #------------------------------------------------- SETUP CUSTOM WIDGET 2 wid3 = CustomWidget2(self) wid3.setGeometry(10, 230, 480, 100) wid3.setStyleSheet("QWidget {background-color: #FFFFFF }") ################################################################################ #-------------------------------------------------------------------------- MAIN app = QtGui.QApplication(sys.argv) win = Parent() win.show() app.exec_()

    Read the article

  • Stretching width correctly to 100% of an inline-block element in IE6 and IE7

    - by Simon Lieschke
    I have the following markup, where I am attempting to get the right hand side of the second table to align with the right hand side of the heading above it. This works in IE8, Firefox and Chrome, but in IE6/7 the table is incorrectly stretched to fill the width of the page. I'm using the Trip Switch hasLayout trigger to apply inline-block in IE6/7. Does anyone know how (or even if) I can get the table only to fill the natural width of the wrapper element displayed with inline-block in IE6/7? You can see the code running live at http://jsbin.com/uyuva. <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Test</title> <style> .wrapper { display: inline-block; border: 1px solid green; } /* display: inline-block triggers the wrapper element to have layout for IE 6/7. The trip switch then provides the inline component of the display behaviour. See http://www.brunildo.org/test/InlineBlockLayout.html for more details. */ .wrapper { *display: inline; } table { border: 1px solid red; } </style> </head> <body> <h1>No width on table:</h1> <div class="wrapper"> <h2>The right hand side of the table doesn't stretch to the end of this heading</h2> <table><tr><td>foo</td></tr></table> </div> text <h1>Width on table:</h1> <div class="wrapper"> <h2>The right hand side of the table should stretch to the end of this heading</h2> <table style="width: 100%"><tr><td>foo</td></tr></table> </div> text </body> </html>

    Read the article

  • jquery - establishing truths when loading inline javascript via AJAX

    - by yaya3
    I have thrown together a quick prototype to try and establish a few very basic truths regarding what inline JavaScript can do when it is loaded with AJAX: index.html <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"></script> </head> <body> <script type="text/javascript"> $('p').css('color','white'); alert($('p').css('color')); // DISPLAYS FIRST but is "undefined" $(document).ready(function(){ $('#ajax-loaded-content-wrapper').load('loaded-by-ajax.html', function(){ $('p').css('color','grey'); alert($('p').css('color')); // DISPLAYS LAST (as expected) }); $('p').css('color','purple'); alert($('p').css('color')); // DISPLAYS SECOND }); </script> <p>Content not loaded by ajax</p> <div id="ajax-loaded-content-wrapper"> </div> </body> </html> loaded-by-ajax.html <p>Some content loaded by ajax</p> <script type="text/javascript"> $('p').css('color','yellow'); alert($('p').css('color')); // DISPLAYS THIRD $(document).ready(function(){ $('p').css('color','pink'); alert($('p').css('color')); // DISPLAYS FOURTH }); </script> <p>Some content loaded by ajax</p> <script type="text/javascript"> $(document).ready(function(){ $('p').css('color','blue'); alert($('p').css('color')); // DISPLAYS FIFTH }); $('p').css('color','green'); alert($('p').css('color')); // DISPLAYS SIX </script> <p>Some content loaded by ajax</p> Notes: a) All of the above (except the first) successfully change the colour of all the paragraphs (in firefox 3.6.3). b) I've used alert instead of console.log as console is undefined when called in the 'loaded' HTML. Truths(?): $(document).ready() does not treat the 'loaded' HTML as a new document, or reread the entire DOM tree including the loaded HTML JavaScript that is contained inside 'loaded' HTML can effect the style of existing DOM nodes One can successfully use the jQuery library inside 'loaded' HTML to effect the style of existing DOM nodes One can not use the firebug inside 'loaded' HTML can effect the existing DOM (proven by Note a) Am I correct in deriving these 'truths' from my tests (test validity)? If not, how would you test for these?

    Read the article

  • Event not bubbling in some Browsers when clicked on Flash

    - by 166_MMX
    Environment: Windows 7, Internet Explorer 8, Flash ActiveX 10.1.53.64, wmode=transparent Just wrote a small test page that you can load in IE and Firefox or any other Browser. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Event bubbling test</title> </head> <body onclick="alert('body');" style="margin:0;border-width:0;padding:0;background-color:#00FF00;"> <div onclick="alert('div');" style="margin:0;border-width:0;padding:0;background-color:#FF0000;"> <span onclick="alert('span');" style="margin:0;border-width:0;padding:0;background-color:#0000FF;"> <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://fpdownload.macromedia.com/get/shockwave/cabs/flash/swflash.cab#version=7,0,0,0" width="159" height="91" id="flashAbout_small" align="absmiddle"> <param name="movie" value="http://www.adobe.com/swf/software/flash/about/flashAbout_info_small.swf"/> <param name="quality" value="high"/> <param name="bgcolor" value="#FFFFFF"/> <param name="wmode" value="transparent"/> <embed src="http://www.adobe.com/swf/software/flash/about/flashAbout_info_small.swf" quality="high" bgcolor="#FFFFFF" width="159" height="91" wmode="transparent" name="flashAbout_small" align="absmiddle" type="application/x-shockwave-flash" pluginspage="http://www.adobe.com/go/getflashplayer"/> </object> </span> </div> </body> </html> So clicking any colored shape should produce an alert (except for the green one in IE, not sure why but I hope that's off topic and not related to my issue). Clicking the Flash container in Firefox will work Perfectly fine. You should get alert boxes in this order containing: span, div and body. Flash bubbles the event to the HTML. But this is not happening in IE. So why is Flash in IE not bubbling events to HTML? Edit: As mentioned by Andy E this behavior can also bee seen in Google Chrome which to my knowledge is not using ActiveX to embed the flash movie into the page.

    Read the article

  • When will the ValueConverter's Convert method be called in wpf

    - by sudarsanyes
    I have an ObservableCollection bound to a list box and a boolean property bound to a button. I then defined two converters, one that operates on the collection and the other operates on the boolean property. Whenever I modify the boolean property, the converter's Convert method is called, where as the same is not called if I modify the observable collection. What am I missing?? Snippets for your reference, xaml snipet, <Window.Resources> <local:WrapPanelWidthConverter x:Key="WrapPanelWidthConverter" /> <local:StateToColorConverter x:Key="StateToColorConverter" /> </Window.Resources> <StackPanel> <ListBox x:Name="NamesListBox" ItemsSource="{Binding Path=Names}"> <ListBox.ItemsPanel> <ItemsPanelTemplate> <WrapPanel x:Name="ItemWrapPanel" Width="500" Background="Gray"> <WrapPanel.RenderTransform> <TranslateTransform x:Name="WrapPanelTranslatation" X="0" /> </WrapPanel.RenderTransform> <WrapPanel.Triggers> <EventTrigger RoutedEvent="WrapPanel.Loaded"> <BeginStoryboard> <Storyboard> <DoubleAnimation Storyboard.TargetName="WrapPanelTranslatation" Storyboard.TargetProperty="X" To="{Binding Path=Names,Converter={StaticResource WrapPanelWidthConverter}}" From="525" Duration="0:0:2" RepeatBehavior="100" /> </Storyboard> </BeginStoryboard> </EventTrigger> </WrapPanel.Triggers> </WrapPanel> </ItemsPanelTemplate> </ListBox.ItemsPanel> <ListBox.ItemTemplate> <DataTemplate> <Grid> <Label Content="{Binding}" Width="50" Background="LightGray" /> </Grid> </DataTemplate> </ListBox.ItemTemplate> </ListBox> <Button Content="{Binding Path=State}" Background="{Binding Path=State, Converter={StaticResource StateToColorConverter}}" Width="100" Height="100" Click="Button_Click" /> </StackPanel> code behind snippet public class WrapPanelWidthConverter : IValueConverter { public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { ObservableCollection<string> aNames = value as ObservableCollection<string>; return -(aNames.Count * 50); } public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { throw new NotImplementedException(); } } public class StateToColorConverter : IValueConverter { public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { bool aState = (bool)value; if (aState) return Brushes.Green; else return Brushes.Red; } public object ConvertBack(object value, Type targetType, object parameter, System.Globalization.CultureInfo culture) { throw new NotImplementedException(); } }

    Read the article

  • detect face from image and crop face from that photo

    - by Siddhpura Amit
    I have done coding in that i am successfully getting face with rectangle drawing now i want to crop that rectangle area. if there are many rectangle( mean many faces) than user can select one of the face or rectangle and that rectangle areal should be cropped can any body help me... Below is my code class AndroidFaceDetector extends Activity { public String path; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); Bundle bundle = this.getIntent().getExtras(); path = bundle.getString("mypath"); setContentView(new myView(this)); } class myView extends View { private int imageWidth, imageHeight; private int numberOfFace = 5; private FaceDetector myFaceDetect; private FaceDetector.Face[] myFace; float myEyesDistance; int numberOfFaceDetected; Bitmap myBitmap; public myView(Context context) { super(context); System.out.println("CONSTRUCTOR"); System.out.println("path = "+path); if (path != null) { BitmapFactory.Options BitmapFactoryOptionsbfo = new BitmapFactory.Options(); BitmapFactoryOptionsbfo.inPreferredConfig = Bitmap.Config.RGB_565; myBitmap = BitmapFactory.decodeFile(path, BitmapFactoryOptionsbfo); imageWidth = myBitmap.getWidth(); imageHeight = myBitmap.getHeight(); myFace = new FaceDetector.Face[numberOfFace]; myFaceDetect = new FaceDetector(imageWidth, imageHeight, numberOfFace); numberOfFaceDetected = myFaceDetect.findFaces(myBitmap, myFace); } else { Toast.makeText(AndroidFaceDetector.this, "Please Try again", Toast.LENGTH_SHORT).show(); } } @Override protected void onDraw(Canvas canvas) { System.out.println("ON DRAW IS CALLED"); if (myBitmap != null) { canvas.drawBitmap(myBitmap, 0, 0, null); Paint myPaint = new Paint(); myPaint.setColor(Color.GREEN); myPaint.setStyle(Paint.Style.STROKE); myPaint.setStrokeWidth(3); for (int i = 0; i < numberOfFaceDetected; i++) { Face face = myFace[i]; PointF myMidPoint = new PointF(); face.getMidPoint(myMidPoint); myEyesDistance = face.eyesDistance(); canvas.drawRect((int) (myMidPoint.x - myEyesDistance), (int) (myMidPoint.y - myEyesDistance), (int) (myMidPoint.x + myEyesDistance), (int) (myMidPoint.y + myEyesDistance), myPaint); } } } } }

    Read the article

  • How to combine a relative top with an absolute bottom in CSS?

    - by ceving
    I need to define a div which must stay with the top at the normal position, which differs from the top of the surrounding element: position:relative top:0 and which grows in the height up to the size of the surrounding element: position:absolute bottom:0 I have no idea how to combine the both. Whenever I use a relative box I loose the absolute bottom and whenever I use an absolute box I loose the relative top. Can anybody help me how to do this in CSS? Here is an example: <html> <head> </head> <style type="text/css"> @media screen { body { position: absolute; top: 0; left: 0; right: 0; bottom: 0; margin: 0; padding: 0; } #head { background-color: gray; } #rel { background-color: green; position: relative; top: 0; bottom: 0; float: left; } #abs { background-color: red; position: absolute; top: 0; bottom: 0; float: left; } } </style> <body> <div id="head"> <h1>Head</h1> </div> <div id="abs"> <h2>absolute</h2> </div> <div id="rel"> <h2>relative</h2> </div> </body> </html> "relative" does not grow at all and "absolute" grows too much.

    Read the article

  • jquery - loading inline javascript via AJAX

    - by yaya3
    I have thrown together a quick prototype to try and establish a few very basic truths regarding what inline JavaScript can do when it is loaded with AJAX: index.html <html> <head> <script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"></script> </head> <body> <script type="text/javascript"> $('p').css('color','white'); alert($('p').css('color')); // DISPLAYS FIRST but is "undefined" $(document).ready(function(){ $('#ajax-loaded-content-wrapper').load('loaded-by-ajax.html', function(){ $('p').css('color','grey'); alert($('p').css('color')); // DISPLAYS LAST (as expected) }); $('p').css('color','purple'); alert($('p').css('color')); // DISPLAYS SECOND }); </script> <p>Content not loaded by ajax</p> <div id="ajax-loaded-content-wrapper"> </div> </body> </html> loaded-by-ajax.html <p>Some content loaded by ajax</p> <script type="text/javascript"> $('p').css('color','yellow'); alert($('p').css('color')); // DISPLAYS THIRD $(document).ready(function(){ $('p').css('color','pink'); alert($('p').css('color')); // DISPLAYS FOURTH }); </script> <p>Some content loaded by ajax</p> <script type="text/javascript"> $(document).ready(function(){ $('p').css('color','blue'); alert($('p').css('color')); // DISPLAYS FIFTH }); $('p').css('color','green'); alert($('p').css('color')); // DISPLAYS SIX </script> <p>Some content loaded by ajax</p> Notes: a) All of the above (except the first) successfully change the colour of all the paragraphs (in firefox 3.6.3). b) I've used alert instead of console.log as console is undefined when called in the 'loaded' HTML. Truths(?): $(document).ready() does not treat the 'loaded' HTML as a new document, or reread the entire DOM tree including the loaded HTML, it is pointless inside AJAX loaded content JavaScript that is contained inside 'loaded' HTML can effect the style of existing DOM nodes One can successfully use the jQuery library inside 'loaded' HTML to effect the style of existing DOM nodes One can not use the firebug inside 'loaded' HTML can effect the existing DOM (proven by Note a) Am I correct in deriving these 'truths' from my tests (test validity)? If not, how would you test for these?

    Read the article

  • Getting pixel data from an image using java.

    - by Matt
    I'm trying to get the pixel rgb values from a 64 x 48 bit image. I get some values but nowhere near the 3072 (= 64 x 48) values that I'm expecting. I also get: Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: Coordinate out of bounds! at sun.awt.image.ByteInterleavedRaster.getDataElements(ByteInterleavedRaster.java:301) at java.awt.image.BufferedImage.getRGB(BufferedImage.java:871) at imagetesting.Main.getPixelData(Main.java:45) at imagetesting.Main.main(Main.java:27) I can't find the out of bounds error... Here's the code: package imagetesting; import java.io.IOException; import javax.imageio.ImageIO; import java.io.File; import java.awt.image.BufferedImage; public class Main { public static final String IMG = "matty.jpg"; public static void main(String[] args) { BufferedImage img; try { img = ImageIO.read(new File(IMG)); int[][] pixelData = new int[img.getHeight() * img.getWidth()][3]; int[] rgb; int counter = 0; for(int i = 0; i < img.getHeight(); i++){ for(int j = 0; j < img.getWidth(); j++){ rgb = getPixelData(img, i, j); for(int k = 0; k < rgb.length; k++){ pixelData[counter][k] = rgb[k]; } counter++; } } } catch (IOException e) { e.printStackTrace(); } } private static int[] getPixelData(BufferedImage img, int x, int y) { int argb = img.getRGB(x, y); int rgb[] = new int[] { (argb >> 16) & 0xff, //red (argb >> 8) & 0xff, //green (argb ) & 0xff //blue }; System.out.println("rgb: " + rgb[0] + " " + rgb[1] + " " + rgb[2]); return rgb; } }

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >