Search Results

Search found 15906 results on 637 pages for 'scott and the dev team'.

Page 84/637 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Calculate minimum ext3 partition size for certain amount of data

  - by Daniel Beck

  These following ext3 partitions contain identical data. As we can see, the larger the partition size, the more space is required for the same files: Filesystem 1K-blocks Used Available Use% Mounted on /dev/loop11 3965777 561064 3199964 15% [...] /dev/loop19 573029 543843 29186 95% [...] Filesystem Size Used Avail Use% Mounted on /dev/loop11 3.8G 548M 3.1G 15% [...] /dev/loop19 560M 532M 29M 95% [...] Filesystem Inodes IUsed IFree IUse% Mounted on /dev/loop11 1024000 1656 1022344 1% [...] /dev/loop19 1024000 1656 1022344 1% [...] I start with a partition of fixed size that possibly wasted a lot of space and I want to create a partition that is able to hold that data but with (almost) minimal size. How can I reliably calculate that minimal partition size needed for storing a certain amount of data? The amount of data changes over time, and I need to automate these calculations.

  Read the article

• What are "build-essential" & "build-dep"?

  - by Adam Siddhi

  I am researching how to install Ruby 1.9.1 in Xubuntu 10.04 and I came across the command build-essential and build-dep multiple times. Sometimes it is followed by packages and sometimes it is both preceded and post-ceded by packages. The 2 examples I am looking at are: sudo apt-get install build-essential zlib1g zlib1g-dev zlibc libruby1.9 libxml2 libxml2-dev libxslt-dev sudo apt-get build-dep ruby1.9 and sudo apt-get install ruby irb ri rdoc ruby1.8-dev libzlib-ruby libyaml-ruby libreadline-ruby libncurses-ruby libcurses-ruby libruby libruby-extras libfcgi-ruby1.8 build-essential libopenssl-ruby libdbm-ruby libdbi-ruby libdbd-sqlite3-ruby sqlite3 libsqlite3-dev libsqlite3-ruby libxml-ruby libxml2-dev

  Read the article

• flashcache with mdadm and LVM

  - by Backtogeek

  I am having trouble setting up flashcache on a system with LVM and mdadm, I suspect I am either just missing an obvious step or getting some mapping wrong and hoped someone could point me in the right direction? system info: CentOS 6.4 64 bit mdadm config md0 : active raid1 sdd3[2] sde3[3] sdf3[4] sdg3[5] sdh3[1] sda3[0] 204736 blocks super 1.0 [6/6] [UUUUUU] md2 : active raid6 sdd5[2] sde5[3] sdf5[4] sdg5[5] sdh5[1] sda5[0] 3794905088 blocks super 1.1 level 6, 512k chunk, algorithm 2 [6/6] [UUUUUU] md3 : active raid0 sdc1[1] sdb1[0] 250065920 blocks super 1.1 512k chunks md1 : active raid10 sdh1[1] sda1[0] sdd1[2] sdf1[4] sdg1[5] sde1[3] 76749312 blocks super 1.1 512K chunks 2 near-copies [6/6] [UUUUUU] pcsvan PV /dev/mapper/ssdcache VG Xenvol lvm2 [3.53 TiB / 3.53 TiB free] Total: 1 [3.53 TiB] / in use: 1 [3.53 TiB] / in no VG: 0 [0 ] flashcache create command used: flashcache_create -p back ssdcache /dev/md3 /dev/md2 pvdisplay --- Physical volume --- PV Name /dev/mapper/ssdcache VG Name Xenvol PV Size 3.53 TiB / not usable 106.00 MiB Allocatable yes PE Size 128.00 MiB Total PE 28952 Free PE 28912 Allocated PE 40 PV UUID w0ENVR-EjvO-gAZ8-TQA1-5wYu-ISOk-pJv7LV vgdisplay --- Volume group --- VG Name Xenvol System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 2 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 3.53 TiB PE Size 128.00 MiB Total PE 28952 Alloc PE / Size 40 / 5.00 GiB Free PE / Size 28912 / 3.53 TiB VG UUID 7vfKWh-ENPb-P8dV-jVlb-kP0o-1dDd-N8zzYj So that is where I am at, I thought that was the job done however when creating a logical volume called test and mounting it is /mnt/test the sequential write is pathetic, 60 ish MB/s /dev/md3 has 2 x SSD's in Raid0 which alone is performing at around 800 MB/s sequential write and I am trying to cache /dev/md2 which is 6 x 1TB drives in raid6 I have read a number of pages through the day and some of them here, it is obvious from the results that the cache is not functioning but I am unsure why. I have added the filter line in the lvm.conf filter = [ "r|/dev/sdb|", "r|/dev/sdc|", "r|/dev/md3|" ] It is probably something silly but the cache is clearly performing no writes so I suspect I am not mapping it or have not mounted the cache correctly. dmsetup status ssdcache: 0 7589810176 flashcache stats: reads(142), writes(0) read hits(133), read hit percent(93) write hits(0) write hit percent(0) dirty write hits(0) dirty write hit percent(0) replacement(0), write replacement(0) write invalidates(0), read invalidates(0) pending enqueues(0), pending inval(0) metadata dirties(0), metadata cleans(0) metadata batch(0) metadata ssd writes(0) cleanings(0) fallow cleanings(0) no room(0) front merge(0) back merge(0) force_clean_block(0) disk reads(9), disk writes(0) ssd reads(133) ssd writes(9) uncached reads(0), uncached writes(0), uncached IO requeue(0) disk read errors(0), disk write errors(0) ssd read errors(0) ssd write errors(0) uncached sequential reads(0), uncached sequential writes(0) pid_adds(0), pid_dels(0), pid_drops(0) pid_expiry(0) lru hot blocks(31136000), lru warm blocks(31136000) lru promotions(0), lru demotions(0) Xenvol-test: 0 10485760 linear I have included as much info as I can think of, look forward to any replies.

  Read the article

• Disk is apparently in use by the system

  - by Shaun

  I've just fitted two disks to my home server. I'm trying to format and then raid them but I'm getting a problem that hours of Googling hasn't resolved this. The error that I'm getting is: # mkfs.ext3 /dev/sdb1 mke2fs 1.39 (29-May-2006) /dev/sdb1 is apparently in use by the system; will not make a filesystem here! # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 4.0G 1.9G 2.0G 49% / none 380M 0 380M 0% /dev/shm /opt/xensource/packages/iso/XenCenter.iso 51M 51M 0 100% /var/xen/xc-install # mount -t ext3 /dev/sdb1 /mnt/b mount: /dev/sdb1 already mounted or /mnt/b busy I'm new to this and it's got me beat. I wouldn't ask if I hadn't done my research first. Thanks.

  Read the article

• How to use second volume devide of amazon EC2

  - by Khoyendra Pande

  I have two volumes of amazon EC2 where by default 1 GiB volume using which has fulled. Now I want to use my second volume which is 9 Gim. I used command cat /proc/partitions I got major minor #blocks name 202 1 1048576 xvda1 202 80 9437184 xvdf Then I hit mkfs.ext3 -F /dev/sdf its showing mkfs.ext3: No such file or directory while trying to determine filesystem size then I hit command df and I got Filesystem 1K-blocks Used Available Use% Mounted on /dev/xvda1 1032088 1031280 0 100% / tmpfs 313160 8 313152 1% /lib/init/rw udev 297800 24 297776 1% /dev tmpfs 313160 4 313156 1% /dev/shm overflow 1024 32 992 4% /tmp means still I am unable to use my 9 GiB space Volume. I am conform I have two volume where attachment information is i-7e4fb41c:/dev/sda1 (attached) and i-7e4fb41c:/dev/sdf (attached) where only sda1 is using. Any one know how may I use my second volume(sdf). Thx

  Read the article

• Reshape linux md raid5 that is already being reshaped?

  - by smammy

  I just converted my RAID1 array to a RAID5 array and added a third disk to it. I'd like to add a fourth disk without waiting fourteen hours for the first reshape to complete. I just did this: mdadm /dev/md0 --add /dev/sdf1 mdadm --grow /dev/md0 --raid-devices=3 --backup-file=/root/md0_n3.bak The entry in /proc/mdstat looks like this: md0 : active raid5 sdf1[2] sda1[0] sdb1[1] 976759936 blocks super 0.91 level 5, 64k chunk, algorithm 2 [3/3] [UUU] [>....................] reshape = 1.8% (18162944/976759936) finish=834.3min speed=19132K/sec Now I'd like to do this: mdadm /dev/md0 --add /dev/sdd1 mdadm --grow /dev/md0 --raid-devices=4 --backup-file=/root/md8_n4.bak Is this safe, or do I have to wait for the first reshape operation to complete? P.S.: I know I should have added both disks first, and then reshaped from 2 to 4 devices, but it's a little late for that.

  Read the article

• Retrieving a specific value from "df -h" using shell

  - by Diego Dias

  When I use df -h, I get the following output: Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 59G 2.2G 54G 4% / /dev/sda1 122M 38M 78M 33% /boot tmpfs 1.1G 0 1.1G 0% /dev/shm 10.10.0.105:/somepath 11T 8.4T 2.1T 81% /storage4 10.11.0.101:/somepath 15T 8.9T 5.9T 61% /storage1 /dev/mapper/patha 5.0T 255G 4.8T 5% /storage5_vol0 /dev/mapper/pathb 5.0T 195G 4.9T 4% /storage5_vol1 /dev/mapper/pathc 5.0T 608G 4.5T 12% /storage5_vol2 I want to write a script that gets the value of Avail column on a specific storage. I used to use df -k /storage_name | tail -1 | awk '{print $3}' But the FileSystem column can have a value or not .. which would change the variable of my script from $3 to $4. How can I get the Avail on a single command line even if there are no values on the previous columns?

  Read the article

• df says disk is full, but it is not

  - by Chris

  On a virtualized server running Ubuntu 10.04, df reports the following: # df -h Filesystem Size Used Avail Use% Mounted on /dev/sda1 7.4G 7.0G 0 100% / none 498M 160K 498M 1% /dev none 500M 0 500M 0% /dev/shm none 500M 92K 500M 1% /var/run none 500M 0 500M 0% /var/lock none 500M 0 500M 0% /lib/init/rw /dev/sda3 917G 305G 566G 36% /home This is puzzling me for two reasons: 1.) df says that /dev/sda1, mounted at /, has a 7.4 gigabyte capacity, of which only 7.0 gigabytes are in use, yet it reports / being 100 percent full; and 2.) I can create files on / so it clearly does have space left. Possibly relevant is that the directory /www is a symbolic link to /home/www, which is on a different partition (/dev/sda3, mounted at /home). Can anyone offer suggestions on what might be going on here? The server appears to be working without issue, but I want to make sure there's not a problem with the partition table, file systems or something else which might result in implosion (or explosion) later.

  Read the article

• slow software raid

  - by Jure1873

  I've got software raid 1 for / and /home and it seems I'm not getting the right speed out of it. Reading from md0 I get around 100 MB/sec Reading from sda or sdb I get around 95-105 MB/sec I thought I would get more speed (while reading data) from two drives. I don't know what is the problem. I'm using kernel 2.6.31-18 hdparm -tT /dev/md0 /dev/md0: Timing cached reads: 2078 MB in 2.00 seconds = 1039.72 MB/sec Timing buffered disk reads: 304 MB in 3.01 seconds = 100.96 MB/sec hdparm -tT /dev/sda /dev/sda: Timing cached reads: 2084 MB in 2.00 seconds = 1041.93 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.77 MB/sec hdparm -tT /dev/sdb /dev/sdb: Timing cached reads: 2150 MB in 2.00 seconds = 1075.94 MB/sec Timing buffered disk reads: 302 MB in 3.01 seconds = 100.47 MB/sec Edit: Raid 1

  Read the article

• URGENT: help recovering lost data

  - by Niels Kristian

  I have made a directory: sudo mkdir /ssd, the directory was supposed to be mounted to a raid array called md3. This was done by adding /dev/md3 /ssd auto defaults 0 0 to fstab. Then after a while where I had used the directory, I realized that I had forgotten to run sudo mount -a - and then I did, and now the data is gone. I tried to uncomment the line in fstab and run sudo mount -a but that didn't get back my data. What can I do!? CONTENT OF FSTAB: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md/0 none swap sw 0 0 /dev/md/1 /boot ext3 defaults 0 0 /dev/md/2 / ext4 defaults 0 0 /dev/md3 /ssd auto defaults 0 0

  Read the article

• wamp alias appearing in localhost instead of another

  - by tournskeud

  I created various aliases on Wamp to be able to work on my different projects. Strangely, one of my alias is visible when I call the other. They have the same ".conf" file : Example : ##### ## x.dev ## DOMAINE x ##### NameVirtualHost x.dev <VirtualHost x.dev> DocumentRoot C:/wamp/www/x/ ServerName x.dev ServerAlias www.x.dev en.x.dev </VirtualHost> Also, I have a "Hosts" file including both of the alias. Wamp config : PHP: 5.4.12 Apache: 2.4.4 Someone have an idea of what is going on ? Thanks a lot in advance,

  Read the article

• Can't recover hard drive

  - by BreezyChick89

  My drive got corrupt after a thunderstorm. It used to be 1 partition of 2.5tb but now it shows 2 partitions. It's weird because 300gig free space is about how much it had before corrupting, but it was part of the first partition. I tried $ sudo resize2fs -f /dev/sdb1 Resizing the filesystem on /dev/sdb1 to 536870911 (4k) blocks. resize2fs: Can't read an block bitmap while trying to resize /dev/sdb1 Please run 'e2fsck -fy /dev/sdb1' to fix the filesystem after the aborted resize operation. sudo e2fsck -f /dev/sdb1 e2fsck 1.42 (29-Nov-2011) The filesystem size (according to the superblock) is 610471680 blocks The physical size of the device is 536870911 blocks Either the superblock or the partition table is likely to be corrupt! Abort? n .... Error reading block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes Force rewrite<y>? yes Error writing block 537395215 (Invalid argument) while reading inode and block bitmaps. Ignore error<y>? yes ... A lot of these. I can't use e2fsck -y because the first question aborts if I say "y". If I put a weight on the 'y' key it fails because none of the errors were really fixed. I asked this question before and tried using gparted but gparted fails because the first thing it does is: e2fsck -f -y -v /dev/sdb1 giving the same error. The disk status says healthy. There are no bad blocks. This is very frustrating because I can see the data in testdisk and it looks like it's all there. I already bought another 2.5tb drive and made a clone using dd. The next step if I can't fix this is to wipe that drive and just move the data with testdisk, but it seems certain folders will copy infinitely until the drive is full because of symlinks or errors so it's also a difficult option. sudo fdisk -l Disk /dev/sdb: 2500.5 GB, 2500495958016 bytes 255 heads, 63 sectors/track, 304001 cylinders, total 4883781168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x0005da5e Device Boot Start End Blocks Id System /dev/sdb1 * 2048 4294969342 2147483647+ 83 Linux sudo badblocks -b 4096 -n -o badfile /dev/sdb 610471680 536870911 badfile is empty I also tried changing the superblock with "fsck -b" but all of them are the same.

  Read the article

• Can't boot Windows after installing Linux

  - by user4035

  I have a partition /dev/sdb1, where my old Windows XP resides. All the files are there intact and I can see them, mounting the disk from Linux. Linux is on /dev/sdb2. But when I choose Windows in LILO prompt, it doesn't load. I have the following lilo.conf: boot = /dev/sdb # Linux bootable partition config begins image = /boot/vmlinuz root = /dev/sdb2 label = Linux read-only # Partitions should be mounted read-only for checking # Linux bootable partition config ends # Windows bootable partition config begins other = /dev/sdb1 label = Windows table = /dev/sdb # Windows bootable partition config ends What can be wrong?

  Read the article

• Which rdisk value in boot.ini maps to which disk?

  - by MA1

  Following are the contents of a sample boot.ini: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /NOEXECUTE=OPTIN /FASTDETECT multi(0)disk(0)rdisk(0)partition(2)\WINNT="Windows 2000 Professional" /fastdetect multi(0)disk(0)rdisk(1)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /NOEXECUTE=OPTIN /FASTDETECT The rdisk value tells the physical disk number. So, if I have three hard disks say: /dev/sda /dev/sdb /dev/sdc Then how to know which disk (/dev/sda or /dev/sdb or /dev/sdc) is rdisk(0) and which disk is rdisk(1), etc.?

  Read the article

• How to prevent Windows 8 of erasing GRUB?

  - by dirleyrls

  I'm doing dualboot with Ubuntu and Windows 8 on my DELL Laptop. EFI is enabled, secure boot is not. My partitions are GPT. Everything seems to work for some time. After some normal use, GRUB stops working. The "ubuntu" EFI entry is still there on top of everything else. But the computer boots directly into the Windows Bootloader, skipping GRUB. Any clues on why is that happening or how can I prevent that? My current partiton setup is: - /dev/sda1 NTFS Windows recovery - /dev/sda2 FAT32 UEFI boot (with boot flag) - /dev/sda3 unknown (msftres flag) - /dev/sda4 NTFS Windows Drive C - /dev/sda5 ext4 /home - /dev/sda6 ext4 / I usually reinstall GRUB through chrooting from a Live Session and doing a apt-get install --reinstall grub-efi-amd64.

  Read the article

• Microsoft Channel 9 Interviews Mei Liang to Introduce Sample Browser Extension for Visual Studio 2012 and 2010

  - by Jialiang

  This morning, Microsoft Channel 9 interviewed Mei Liang - Group Manager of Microsoft All-In-One Code Framework - to introduce the newest Sample Browser extension for Visual Studio 2012 &2010.   This extension provides a way for developers to search and download more than 4500 code samples from within Visual Studio, including over 700 Windows 8 samples and more than 1000 All-In-One Code Framework customer-driven code samples. Mei shows us not only the extension, but also the standalone version of the Sample Browser.   http://channel9.msdn.com/Shows/Visual-Studio-Toolbox/Sample-Browser-Visual-Studio-Extension   Microsoft All-In-One Code Framework, working in close partnership with the Visual Studio product team and MSDN Samples Gallery, developed the Sample Browser extension for both Visual Studio 2012 and Visual Studio 2010.  As an effort to evolve the code sample use experience and improve developers' productivity, the Sample Browser allows programmers to search, download and open over 4500 code samples from within Visual Studio with just a few simple clicks.  If no existing code sample can meet the needs, developers can even request a code sample easily from Microsoft thanks to the free “Sample Request Service” offered by Microsoft All-In-One Code Framework.  Through innovations, the teams hope to put the power of tens of thousands of code samples at developers’ fingertips. In short 3 months, the Sample Browser Visual Studio Extension has been installed by 100K global users.  It is also selected as one of the six most highly regarded and commonly used tools for Visual Studio that will make your programming experience feel like never before.   Got to love the All-In-One Code Framework team! You guys know this is THE go to source for code samples. Get this extension and you'll never need to leave VS2012 (well except for bathroom trips, but that's TMI anyway... ;) Read More... From: Greg Duncan (Author of CoolThingOfTheDay) 9/6/2011 12:00 AM The one software design pattern that I have used in just about every application I’ve written is “cut-and-paste,” so the new “Sample Browser” – read sample as a noun not an adjective – is a great boon to my productivity. Read More... From: Jim O'Neil (Microsoft Developer Evangelist) 9/28/2011 12:00 AM Install: http://aka.ms/samplebrowservsx Microsoft All-In-One Code Framework also offers the standalone version of Sample Browser.   The standalone version is particularly useful to Visual Studio Express edition or Visual Studio 2008 users, who cannot install the Sample Browser Visual Studio extension.   From Grassroots’ Passion for Developers to the Innovation of Sample Browser This Sample Browser has come a very long way improving the code sample use experience.  The history can be traced back to a grass-root innovation three years ago.   In early 2009, a few MSDN forum support engineers observed that lots of developers were struggling to work in Visual Studio without adequate code samples. Programming tasks seem harder than they should be when you only read through the documentation.  Just a couple of lines of sample code could answer a lot of questions.   They had a brilliant idea: What if we produce code samples based on developers’ frequently asked programming tasks in forums, social networks and support incidents, and then aggregate all our sample code in a one-stop library to benefit developers?  And what if developers can request code samples directly from Microsoft, free of charge?  This small group of grassroots at Microsoft devoted their nights and weekends to prototyping such a customer-driven code sample library.  This simple idea eventually turned into “Microsoft All-In-One Code Framework”, aka. OneCode.  With the support from more and more passionate developers at Microsoft and the leaders in the Community and Online Support team and Microsoft Commercial Technical Services (CTS), the idea has become a continually growing library with over 1000 customer-driven code samples covering almost all Microsoft development technologies.  These code samples originated from developers’ common pains and needs should be able to help many developers.  However, if developers cannot easily discover the code samples, the effort would still be in vain.  So in early 2010, the team started the idea of Sample Browser to ease the discovery and access of these samples.  In just two months, the first version of Sample Browser was finished and released by a passionate developer.  It was a very simple application, only supporting the basic sample offline search.  Users had to download the whole 100MB sample package containing all samples first, and run the Sample Browser to search locally.   Though developers could not search and download samples on-demand, this simple application laid a solid foundation for the team’s continuous innovations of Sample Browsing experience. In 2011, MSDN Samples Gallery had a big refresh.  The online sample experience was brought to a new level thanks to its PM Steven Wilssens and the gallery team’s effort.  Microsoft All-In-One Code Framework Team saw the opportunity to realize the “on-demand” sample search and download feature with the new gallery.  The two teams formed a strong partnership to upload all the customer-driven code samples to MSDN Samples Gallery, and released the new version of Sample Browser to support “on-demand” sample downloading in April, 2011.  Mei Liang, the Group Manager of Microsoft All-In-One Code Framework, was interviewed by Channel 9 to demo the Sample Browser.  Customers love the effort and the innovation!!  This can be clearly seen from the user comments in the publishing page.   It was very encouraging to the team of All-In-One Code Framework. The team continues innovating and evolving the Sample Browser.  They found the Visual Studio product team this time, and integrated the Sample Browsing experience into the latest Visual Studio 2012.  The newly released Sample Browser Visual Studio extension makes good use of Visual Studio 2012 IDE such as the new Quick Launch bar, the code editor, the toolbar and menus to offer easy access to thousands of code samples from within the development environment.   The Visual Studio Senior Program Manager Lead - Anthony Cangialosi, the Program Manager - Murali Krishna Hosabettu Kamalesha, the MSDN Samples Gallery PM – Steven Wilssens, and the Visual Studio Senior Escalation Engineer - Ed Dore shared lots of insightful suggestions with the team.  Thanks to the brilliant cross-group collaboration inside Microsoft, tens of new features including “Local Language Support” and “Favorite Samples”, as well as a face-lifted user interface, were added to further enhance the user experience. Since the new Sample Browser Visual Studio extension was released, it has received over 100 thousand downloads and five-star ratings.  A customer told the team that he officially falls in LOVE with Microsoft All-In-One Code Framework.   The Sample Browser Innovation for Developers Never Stops! The teams would never stop improving the Sample Browser for developers’ easier lives.   The Microsoft All-In-One Code Framework, Visual Studio and MSDN Samples Gallery teams are working closely to develop the next version of Sample Browser.  Here are the key functions in development or in discussion.  We hope to learn your feedback of the effort.  You can submit your suggestions to the official Visual Studio UserVoice site.  We look forward to hearing from you! 1) Offline Sample Search This is one of the top feature requests that we have received for Sample Browser.   The Sample Browser will support the offline search mode so that developers can search downloaded code samples when they do not have internet access.  This is particularly useful to developers in Enterprises with strict proxy settings. 2) Code Snippet Support and Visual Studio Editor Integration Today, the Sample Browser supports downloading and opening sample project.   However, when developers are searching for code samples, a better user experience would be to see the code snippets in the search result first.  Developers can quickly decide if the code snippet is relevant.   They can also drag and drop the code snippet into the Visual Studio Editor to solve some simple programming tasks.  If developers want to learn more about the sample, they can then choose to download the sample project and open it in Visual Studio. 3) Enterprise Sample Sharing and Searching Large enterprises have many code samples for their own internal tools and APIs that are not appropriate to be shared publicly in MSDN Samples Gallery.   In that case, today’s Sample Browser and MSDN Samples Gallery cannot help these Enterprise developers.  The idea is to create a Code Sample Repository in TFS, and provide an additional Visual Studio extension for Enterprise developers to quickly share code samples to TFS.  The Sample Browser can be configured to connect to the TFS Code Sample Repository to search for and download code samples.  This would potentially enable the Enterprise developers to be more productive. 4) Windows Store Sample Browser With the upcoming release of Windows RT and Microsoft Surface, developers are facing a completely new world of application platform.   Not like laptop, people would often use Microsoft Surface in commute and in travel.  Internet may not be available.  Today’s Visual Studio cannot be installed and run on Windows RT, however, our enthusiastic developers would hope to spend every minute on code.  They love code!   The idea is to create a Windows Store version of Sample Browser. Search and download samples from the online Samples Gallery when the user has internet access. Browse the sample code files and learn the sample documentation of downloaded samples with or without internet access.   In addition to the "browse” function, the Sample Browser could further support “bookmark”, “learning notes”, “code review”, and “quick social sharing". Make full use of the new touch and Windows Store App UI to give developers a new “relaxing” code browsing and learning experience, anytime, anywhere. With Windows Store Sample Browser, developers can enjoy A new relaxing and enjoyable experience for developers to learn code samples You do not have to sit in front of desk and formally open Visual Studio to read code samples.  Many developers get sub-health due to staying in front of desk for a very long time.  With Windows RT, Microsoft Surface and this Windows Store Sample Browser combining with the online MSDN Samples Gallery, developers can sit in a sofa, relaxingly hold the tablet and enjoy to learn their beloved sample code with detailed documentation. Anytime, anywhere Whether you have internet access or not, whether you are at home, in office, or in commute/airplane, developers can always easily access and browse the sample code. Lightweight and fast Particularly for learning a small sample project, the Windows Store Sample Browser would be more lightweight and faster to open and browse the sample code. Please submit your feedback and suggestion to Visual Studio UserVoice.  We look forward to hearing from you and deliver a better and better sample use experience.  Happy Coding!   Special Thanks to People working behind the latest release of Sample Browser Visual Studio Extension and the great partnerships!

  Read the article

• Read only file system

  - by Jack Moon

  I'm running Ubuntu 12.10, Upon opening any shell I get the following error: /home/jack/.rbenv/libexec/rbenv-init: line 87: cannot create temp file for here-document: Read-only file system I realised this wasn't simply a rbenv issue, as any file I try to write to returns an error saying the system is Read-only. I don't know how else to describe my problem, each time I boot up the system goes through a disk check, where it supposedly fixes several errors in my disk. Here is my /etc/fstab # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda1 during installation UUID=1cc4b2ab-a984-4516-ac25-6d64f5050244 / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=4e0dfeae-701a-43ce-b5c6-65f15ab3d8e3 none swap sw 0 0 The entire file system is read-only. I've tried the following sudo fsck.ext4 -f /dev/sda1 which gave the following (shortened) output /dev/sda1: ***** FILE SYSTEM WAS MODIFIED ***** /dev/sda1: ***** REBOOT LINUX ***** /dev/sda1: 1257080/45268992 files (1.0% non-contiguous), 50696803/181051904 blocks

  Read the article

• ext4 jbd2 journaling active even on empty filesystem

  - by Paul

  I have been having several issues with my ext4 filesystems that seem to be due to jbd2 journaling. I made a related post here and am rephrasing it with the hope that someone may be able to help. For a minimal example, I start with an empty 8gb USB stick and use gparted to create one ext4 partition. The command used by gparted when creating the ext4 file system is: mkfs.ext4 -j -O extent -L DataTraveler8gb /dev/sde1 I check the filesystem with gparted: e2fsck -f -y -v /dev/sde1 and I mount it: sudo mount /dev/sde1 /media/test The disk is empty, but the journaling is very active on this disk (/dev/sde1). The other disks are ext4 SSDs formatted similarly. A snapshot of iotop: % sudo iotop -oPa Total DISK READ: 0.00 B/s | Total DISK WRITE: 2027.21 K/s PID PRIO USER DISK READ DISK WRITE SWAPIN IO COMMAND 262 be/3 root 0.00 B 56.00 K 0.00 % 0.18 % [jbd2/sda1-8] 29069 be/3 root 0.00 B 0.00 B 0.00 % 0.16 % [jbd2/sde1-8] 891 be/3 root 0.00 B 4.00 K 0.00 % 0.03 % [jbd2/sdc1-8] What is jbd2 doing with /dev/sde1? If I follow the same steps with a larger 2Tb disk, iotop indicates this empty disk is constantly being written to by jbd2 at the rate of Mb/s as soon as I mount it. On the other disks, which have the OS and /home, I have tried to find if any files are being modified by processes to cause this behavior but couldn't find any. I also moved many of the disk intensive process to use a tmpfs. And used noatime. I have another non-SSD hard disk on this machine, /dev/sdb, that is also ext4 but was not formatted by gparted (given to me by a coworker). It does not appear in iotop. So I am assuming there an issue with gparted. Any suggestions are appreciated. Also any tips on how to modify existing partitions to fix the issue without having to start from scratch would be great. There are some posts related to jbd2 but they didn't help (eg. here).

  Read the article

• Drivers for NVIDIA 520M not working in Ubuntu 12.04

  - by Don

  I am aware that this is nominally a duplicate question, however I've read the other questions and haven't been able to resolve my problem after many hours and attempts, so please don't delete it. Additionally, it seems like many answers to the other questions are specifically dependent on certain situations. My situation being different from the others I found represented, here's my question. Until last night, I had Ubuntu 12.04 installed with Wubi, and it ran ok, though slowly and with occasional hangs. So I partitioned the drive and installed 12.04 in its own partition. Now when I start it, I am stuck using 2D. I believe this is an NVIDIA bug. My NVIDIA card is a GT 520M and my machine has Optimus. Additional Drivers only displays my wireless driver. Going to System Settings Details Graphics shows Driver:Unknown, Experience:Standard. I downloaded the driver from the NVIDIA website, and ran the installer with no errors, except that the "distribution-provided pre-install script failed". After rebooting, my screen was stuck at 640X480, which was fixed by editing /etc/X11/xorg.conf However, I still was stuck in 2D, and nothing else had changed either. A thread suggested something called Bumblebee. I tried that, and when I ran optirun firefoxI got a frozen blank screen. Following another suggestion, I checked the BIOS to try and disable Optimus. I found and ran myriad other commands to try and fix the problem and nothing changed. Now I have just done a clean re-install of Ubuntu. From there, I: Installed all the updates Downloaded the NVIDIA driver Installed it Got screen stuck at 640X480, fixed in xorg.conf. To recap the problem: I can't get the NVIDIA drivers working I am stuck using 2D I'm an idiot I think if the first one is solved, the solution to the second will naturally follow. If you need me to provide any other information, I'd be happy to. From what I've seen in other threads, I think this information may help: lsmod: dh@donsMachine:~$ lsmod Module Size Used by nvidia 12353161 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 joydev 17693 0 parport_pc 32866 0 ppdev 17113 0 rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event lib80211_crypt_tkip 17390 0 wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device psmouse 87692 0 serio_raw 13211 0 i915 468745 2 soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm drm_kms_helper 46978 1 i915 drm 242038 3 i915,drm_kms_helper mei 41616 0 i2c_algo_bit 13423 1 i915 mxm_wmi 12979 0 acer_wmi 28418 0 sparse_keymap 13890 1 acer_wmi video 19596 1 i915 wmi 19256 2 mxm_wmi,acer_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp tg3 152032 0 sdhci_pci 18826 0 sdhci 33205 1 sdhci_pci lspci -nn | grep VGA dh@donsMachine:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:0df7] (rev a1) lshw dh@donsMachine:~$ sudo lshw [sudo] password for dh: donsmachine description: Notebook product: EasyNote TS44HR () vendor: Packard Bell version: V1.12 serial: LXBWZ02017134209D71601 width: 64 bits capabilities: smbios-2.7 dmi-2.7 vsyscall32 configuration: boot=normal chassis=notebook uuid=16FE576B-CA15-11E0-B096-B870F4E51243 *-core description: Motherboard product: SJV50_HR vendor: Packard Bell physical id: 0 version: Base Board Version serial: Base Board Serial Number slot: Base Board Chassis Location *-firmware description: BIOS vendor: Packard Bell physical id: 0 version: V1.12 date: 07/11/2011 size: 1MiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 1b slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 0 serial: 598E126E slot: ChannelA-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: DIMM [empty] physical id: 1 slot: ChannelA-DIMM1 *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: NT2GC64B88B0NS-CG vendor: Nanya Technology physical id: 2 serial: 159E126C slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: DIMM [empty] physical id: 3 slot: ChannelB-DIMM1 *-cpu description: CPU product: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz vendor: Intel Corp. physical id: 2e bus info: cpu@0 version: Intel(R) Core(TM) i3-2330M CPU @ 2.20GHz slot: CPU1 size: 2GHz capacity: 4GHz width: 64 bits clock: 1333MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=2 enabledcores=2 threads=4 *-cache:0 description: L1 cache physical id: 30 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache:1 description: L2 cache physical id: 31 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L3 cache physical id: 32 slot: L3 Cache size: 3MiB capacity: 3MiB capabilities: synchronous internal write-through unified *-cache description: L1 cache physical id: 2f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:d0000000-d10fffff ioport:a0000000(size=301989888) *-display description: VGA compatible controller product: NVIDIA Corporation vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:d0000000-d0ffffff memory:a0000000-afffffff memory:b0000000-b1ffffff ioport:2000(size=128) memory:d1000000-d107ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:43 memory:d1400000-d17fffff memory:c0000000-cfffffff ioport:3000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:42 memory:d1a04000-d1a0400f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:d1a0a000-d1a0a3ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:44 memory:d1a00000-d1a03fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 memory:9fb00000-9fbfffff ioport:d1800000(size=1048576) *-network description: Ethernet interface product: NetLink BCM57785 Gigabit Ethernet PCIe vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 10 serial: b8:70:f4:e5:12:43 capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress bus_master cap_list rom ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 firmware=sb latency=0 link=no multicast=yes port=twisted pair resources: irq:16 memory:d1830000-d183ffff memory:d1840000-d184ffff memory:d1850000-d18507ff *-generic:0 description: SD Host controller product: NetXtreme BCM57765 Memory Card Reader vendor: Broadcom Corporation physical id: 0.1 bus info: pci@0000:02:00.1 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=sdhci-pci latency=0 resources: irq:17 memory:d1800000-d180ffff *-generic:1 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.2 bus info: pci@0000:02:00.2 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1810000-d181ffff *-generic:2 UNCLAIMED description: System peripheral product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0.3 bus info: pci@0000:02:00.3 version: 10 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d1820000-d182ffff *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b4 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d1900000-d19fffff *-network description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 68:a3:c4:44:81:96 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.0.12 latency=0 multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d1900000-d1903fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:d1a09000-d1a093ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 04 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 04 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:3098(size=8) ioport:30bc(size=4) ioport:3090(size=8) ioport:30b8(size=4) ioport:3060(size=32) memory:d1a08000-d1a087ff *-disk description: ATA Disk product: ST9500325AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0001 serial: S2W1AMSX size: 465GiB (500GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=a45f21e9 *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 46aa-2a25 size: 19GiB capacity: 20GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:00 filesystem=ntfs label=PQSERVICE state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: 10aa-ad1a size: 98MiB capacity: 100MiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=SYSTEM RESERVED state=clean *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 668c5afc-182e-ff4b-b084-3cc09f54972d size: 395GiB capacity: 395GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-08-25 21:32:03 filesystem=ntfs label=Don's Machine state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 49GiB capacity: 49GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 3945MiB capabilities: nofs *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: / capacity: 46GiB configuration: mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD-RW DVRTD11RS vendor: PIONEER physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.01 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 04 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d1a06000-d1a060ff ioport:3040(size=32) *-power UNCLAIMED description: OEM_Define1 product: OEM_Define5 vendor: OEM_Define2 physical id: 1 version: OEM_Define6 serial: OEM_Define3 capacity: 75mWh *-battery description: Lithium Ion Battery product: CRB Battery 0 vendor: -Virtual Battery 0- physical id: 2 version: 10/12/2007 serial: Battery 0 slot: Fake

  Read the article

• TDD/Tests too much an overhead/maintenance burden?

  - by MeshMan

  So you've heard it many times from those who do not truly understand the values of testing. Just to start things out, I'm a follower of Agile and Testing... I recently had a discussion about performing TDD on a product re-write where the current team does not practice unit testing on any level, and probably have never heard of the dependency injection technique or test patterns/design etc (we won't even get on to clean code). Now, I am fully responsible for the rewrite of this product and I'm told that attempting it in the fashion of TDD, will merely make it a maintenance nightmare and impossible for the team maintain. Furthermore, as it's a front-end application (not web-based), adding tests is pointless, as the business drive changes (by changes they mean improvements of course), the tests will become out of date, other developers who come on to the project in the future will not maintain them and become more of a burden for them to fix etc. I can understand that TDD in a team that does not currently hold any testing experience doesn't sound good, but my argument in this case is that I can teach my practice to those around me, but further more, I know that TDD makes BETTER software. Even if I was to produce the software using TDD, and throw all the tests away on handing it over to a maintenance team, it surely would be a better approach than not using TDD at all from the start? I've been shot down as I've mentioned doing TDD on most projects for a team that have never heard of it. The thought of "interfaces" and strange looking DI constructors scares them off... Can anyone please help me in what is normally a very short conversation of trying to sell TDD and my approach to people? I usually have a very short window of argument before falling at the knees to the company/team.

  Read the article

• Updating Banshee to 2.4

  - by Lucasguy11

  I have banshee 2.2.1 with Ubuntu 11.10 I have been trying to update banshee to 2.4 (released yesterday) but it just isnt working, I have been using sudo add-apt-repository ppa:banshee-team/ppa in terminal, from the Banshee.fm website. but after running through terminal it says this: sudo add-apt-repository ppa:banshee-team/ppa You are about to add the following PPA to your system: PPA for Banshee Team This PPA contains the latest stable debs of Banshee for Ubuntu. To install Banshee, you must first enable the PPA on your system: 1. Open Software Sources (System->Administration->Software Sources) 2. Navigate to the "Third Party Sources" tab. 3. Click "Add" 4. Enter the APT line below that corresponds to your Ubuntu version that starts with "deb". 5. Click "Add Source" 6. Click "Close" 7. It will prompt you to reload your software cache. Click "Reload". 8. Now install the package "banshee" from Synaptic, or using the command below: sudo apt-get install banshee For those who wish to compile from trunk, add the deb-src line and then run "sudo apt-get build-dep" to install all required dependencies before starting to compile. Unstable (version which have odd minor version numbers) debs of Banshee can be found here: https://launchpad.net/~banshee-team/+archive/banshee-unstable More info: https://launchpad.net/~banshee-team/+archive/ppa Press [ENTER] to continue or ctrl-c to cancel adding it Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /tmp/tmp.OPAjxemDQr --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver hkp://keyserver.ubuntu.com:80/ --recv 9D2C2E0A3C88DD807EC787D74874D3686E80C6B7 gpg: requesting key 6E80C6B7 from hkp server keyserver.ubuntu.com gpg: key 6E80C6B7: "Launchpad PPA for Banshee Team" not changed gpg: Total number processed: 1 gpg: unchanged: 1 I believe I have the ppa but, im not sure. I need a step by step process to get this, ive been trying to figure it out for quite a while now...

  Read the article

• Unable to decide weather to continue or quit and start a new carrier

  - by latif mohammad khan

  I am working in a small company. I have joined here for java developer ,but they told as i am fresher so work as Android developer . Then i asked one of my lecturer about Android developement.then he replied why going for mobile developement which is not standard(as nokia's symbain lost , mobile os changes quickly ) its better to get job as Java Developer. By listening his words i was bit not satisfied with my job and thought of leaving Job and search as java developer. But i dont have much confidence to search a job at that time(because i got job after 1 and half years after i passed out), i have decided to work as android developer(as learning new technology and practice java at home). On the first day they introduced me to team leads and they assigned under him. After few days i came to know that my team lead is having only 1 year experience. He(my team lead) joined here as a fresher and done r&d now is my Team lead. If i ask any doubt to him , he just search in internet and reply's my question (some times he explains wrongly) i correct it by myself by searching in net.In my company they don't use latest technologies,they dont follow any design patterns because they dont know them. They provide me very less pay and more work, i dont bother about pay because i am fresher but i bother about work which is not use(I feel like that because they dont use latest technologies,no design patterns,no proper team lead) What i thought was to learn from the company, Team leads how the project done. But there I feel like, i am wasting my time.If i go for another interview in future they ask latest technologies. Now i dont know what to do weather to quit the job and learn another language which have good demand like sap abap or to continue here. please provide me advice Thanks.

  Read the article

• Performance Overhead of Encrypted /home

  - by SabreWolfy

  I have a netbook with Windows on the second partition and Xubuntu (/ and /home) on the third partition. I selected to encrypt my home folder during installation. The performance of the netbook is adequate for the small machine that it is, but I'm looking to improve performance. I could not find much information about the overhead (CPU or drive) associated with home partition encryption. I ran the following, writing to my home partition as well as the the mounted Windows partition: dd if=/dev/zero of=~/dummy bs=512 count=10240 dd if=/dev/zero of=/media/Windows/dummy bs=512 count=10240 The first returned 2.4MB/s and the second returned 2.5MB/s. Can I therefore deduce that there is very little overhead to home folder encryption? I'm not sure if the different filesystems will make any difference (/ and /home are ext3). Update 1 I don't know why I didn't use /tmp instead of the mounted Windows folder. Only /home is encrypted, so /tmp is unencrypted ext3. The results of the dd as above are astounding: ~: 2.4 MB/s /tmp: 42.6 MB/s Comments please? The reason I am asking this is that disk access on the netbook is noticeably slow. Update 2 I timed each of the dd operations with time: ~: real 0m2.217s user 0m0.028s sys 0m2.176s /tmp: real 0m0.152s user 0m0.012s sys 0m0.136s See also: discussion on UbuntuForums.org and bug report Edit: Output of mount: /dev/sda3 on / type ext3 (rw,noatime,errors=remount-ro,user_xattr,commit=600) proc on /proc type proc (rw,noexec,nosuid,nodev) none on /sys type sysfs (rw,noexec,nosuid,nodev) fusectl on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) none on /dev type devtmpfs (rw,mode=0755) none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) none on /dev/shm type tmpfs (rw,nosuid,nodev) none on /var/run type tmpfs (rw,nosuid,mode=0755) none on /var/lock type tmpfs (rw,noexec,nosuid,nodev) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev) gvfs-fuse-daemon on /home/USER/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=USER) `

  Read the article

• Running ASP.Net MVC3 Alongside ASP.Net WebForms in the Same Project

  - by Sam Abraham

  I previously blogged on running ASP.Net MVC in an ASP.Net WebForms project. My reference at the time was a freely-available PDF document by Scott Guthrie which covered the setup process in good detail.   As I am preparing references to share with our audience at my upcoming talk at the Deerfield Beach Coders Café on March 1st (http://www.fladotnet.com/Reg.aspx?EventID=514), I found a nice blog post by Scott Hanselman on running both ASP.Net 4.0 WebForms along with ASP.Net MVC 3.0 in the same project. You can access this article here.   Moreover, Scott later followed-up with a blog showing how to leverage NuGet to automate the setup of ASP.Net MVC3 in an existing ASP.Net WebForms project.   One frequent question that usually comes up when discussing this side-by-side setup is the loss of the convenient Visual Studio Solution Explorer context menu which enable us to easily create controllers and views with a few mouse clicks.   A good suggestion brought up in the comments section of Scott’s article presented a good work-around to this problem: Manually add the MVC Visual Studio Project Type GUID in your .sln solution file ({E53F8FEA-EAE0-44A6-8774-FFD645390401}) which then brings back the MVC-specific context menu functionality in solution explorer of the hybrid project. (Thank James Raden!)

  Read the article

• can ping, but not SSH

  - by Matt

  So I have NetworkManager, connected to an AP on wlan1. I have wlan0 connected to a AdHoc network. I have Firestarter sharing my inet on the Adhoc. I have my ipod connected to wlan0, IP 10.42.43.101. wlan0 Link encap:Ethernet HWaddr ac:xx:12:81:7f:xx inet addr:10.42.43.1 Bcast:10.255.255.255 Mask:255.0.0.0 wlan1 Link encap:Ethernet HWaddr 00:xx:b3:98:f2:xx inet addr:10.0.1.61 Bcast:10.0.1.255 Mask:255.255.255.0 Now, I can ping my Jailbroken, SSH-enabled and running ipod touch: matt: ~ $ ping 10.42.43.101 PING 10.42.43.101 (10.42.43.101) 56(84) bytes of data. 64 bytes from 10.42.43.101: icmp_req=1 ttl=64 time=168 ms 64 bytes from 10.42.43.101: icmp_req=2 ttl=64 time=256 ms 64 bytes from 10.42.43.101: icmp_req=3 ttl=64 time=151 ms ^C --- 10.42.43.101 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 151.465/191.979/256.316/46.003 But I cannot SSH it: $ ssh [email protected] -vv OpenSSH_5.8p1 Debian-1ubuntu3, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.42.43.101 [10.42.43.101] port 22. It just stays there till I ^C it.. Here's my routing: $ ip route show 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 2 10.0.1.0/24 dev wlan1 proto kernel scope link src 10.0.1.61 metric 319 169.254.0.0/16 dev vboxnet0 proto kernel scope link src 169.254.128.223 metric 204 10.0.0.0/8 dev wlan0 proto kernel scope link src 10.42.43.1 default via 10.0.1.1 dev wlan1 proto static default via 10.0.1.1 dev wlan1 metric 319

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >