Search Results

Search found 9754 results on 391 pages for 'virtual lotos'.

Page 84/391 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• DIsable my nv video card driver in linux

  - by Dahaka Wang

  I'm trying to passthrough my nv video card to my domU, but I could not bind my video card to the pciback driver I only have one video card with the pci number 0000:03:00.0, so I used the following command echo -n "0000:03:00.0" > /sys/bus/pci/drivers/nouveau/bind to unbind the nouveau driver from my video card. The screen went black because I have forcefully removed the video driver, therefore I ssh'd into the computer to run further commands I ran: echo -n "0000:03:00.0" > /sys/bus/pci/drivers/pciback/bind to try to bind it to my pciback driver, but I got: bash: echo: write error: No such device I found out that this was the message shown when trying to bind a PCI device which is already bound. Therefore, I think that something was still using my video card Can anyone help me out? Thanks a lot!

  Read the article

• Will SSD degrade when running VMWare Workstation from SSD?

  - by Andrey Botalov

  My main OS (Windows 7 or 8) is runned from SSD. I'd want to run Mac OS X 10.7 or 10.8 using VMWare workstation. I've heard that VMWare doesn't support TRIM and other things to optimize SSD usage. So SSD will quickly degrade if VM will be runned from SSD. Will it be better to put guest OS's files (.vmdk and the rest) to external HDD (connected through USB 2 or 3) instead of SSD? What advantages and disadvantages it will give? What if VM will be put to internal HDD? At what drive type performance of VM will be better?

  Read the article

• What is Paging in memory management?

  - by Fasih Khatib

  I was just reading Operating System Principles by Silberschatz et al when I came across paging in memory management.I'm slightly confused about it. It states that Physical Memory(I assume it's RAM) is divided into frames, and logical memory is divided into pages. CPU generates logical addresses containing page number and an offset. This page number is used to retrieve the frame number from a page table which gives the base address so the physical address is calculated as base+offset. My question is: is the page table maintained for every process? I logically think that the answer would be yes as every process will need to map its own pages to frames. I may be wrong. Please clarify. Also: paging and segmentation(where 'holes' are created in memory) are two totally different techniques that are not used in combination. Correct?

  Read the article

• Server needs to ping outgoing before allowing connection

  - by QuintenVK

  Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

  Read the article

• What is the best way to setup a heartbeat agent for failover between two VMs?

  - by EGr

  I have two VMs in VirtualBox that use NAT for their network adapters. They are both getting the same IP address, so I will need to reconfigure that; but knowing that, is it possible to set up a heartbeat agent to failover an apache server if one of the two VMs go down? The way I pictured it would be that the webserver would be able to be accessed externally via :80. No matter what VM was running, I would be able to access the website at that IP/port since failover would be setup. I'm running into trouble setting up IPs when the network adapters are set to NAT, and people have told me that I shouldn't be setting the IPs in this configuration. So what should I do to achieve what I'm looking for? Is it even feasible?

  Read the article

• Why do I get swap space related errors when I still have lots of free memory in Solaris 10?

  - by Tom Duckering

  I am seeing a few of my services suffering/crashing with errors along the lines of "Error allocating memory" or "Can't create new process" etc. I'm slightly confused by this since logs show that at the time the system has lots of free memory (around 26GB in one case) of memory available and is not particularly stressed in any other way. After noting a JVM crash with similar error with the added query of "Out of swap space?" it made me dig a little deeper. It turns out that someone has configured our zone with a 2GB swap file. Our zone doesn't have capped memory and currently has access to as much of the 128GB of the RAM as it need. Our SAs are planning to cap this at 32GB when they get the chance. My current thinking is that whilst there is memory aplenty for the OS to allocate, the swap space seems grossly undersized (based on other answers here). It seems as though Solaris is wanting to make sure there's enough swap space in case things have to swap out (i.e. it's reserving the swap space). Is this thinking right or is there some other reason that I get memory allocation errors with this large amount of memory free and seemingly undersized swap space?

  Read the article

• Virtualbox VM (spawned by Vagrant) running but inaccessible. What now?

  - by Matt V.

  I have a Virtualbox VM running Ubuntu that was started by Vagrant. At some point my ssh session connected to the guest stopped responding. I tried "vagrant halt" from a terminal window on the host (OS X). The shutdown process seemed to also hang. Shutting down the Oracle VM VirtualBox Manager doesn't shut down the VMs themselves. Is there a way in either Vagrant or VirtualBox to force the running VM to shutdown? When running desktop guest OSes, closing the GUI window presents several options for shutting down the guest, but I don't know how to do the equivalent when the guest is running headless.

  Read the article

• Does Win7 VPC negate need to re-install?

  - by justSteve

  I fear i have an impending hardware breakdown coming ... the last time the box booted i had to power off and on a couple times before windows loaded. Seems fine when up and running. So i'm preparing to install new hardware and would like to bring over the currently installed image. From what i've read of VM capabilities of VM i shouldn't have to re-install? VM seems most applicable to data centers and enterprises. I'd like to see some coverage of the tricks for SOHO users.

  Read the article

• VirtualBox or else programs to run Mac OS virtually on Windows 7

  - by blgnklc

  any idea will help me to enlarge the boundaries surround me nowadays. regards

  Read the article

• Is it possible to export an OpenVZ machine and use it after in another virtualization tool?

  - by Somebody still uses you MS-DOS

  I'm planning to use OpenVZ in an old machine I have at home. I want to know if a dumped OpenVZ instance image can be exported to other formats (like VirtualBox or Vmware). Thanks!

  Read the article

• VMware guest pauses when the host is idle - how do I keep it running?

  - by EMP

  I'm running VMWare Worstation 7 with Windows 7 x64 as guest, Windows XP x64 as host. Inside the guest I run a long-running console application, which prints out progress messages with timestamps on them. Sometimes I leave it running for several hours while I lock the host OS and don't touch the computer at all. When I come back I find that some time after I left it seems to have paused and automatically resumed: the console app hasn't made much progress and there's a large time gap in its progress messages. There's nothing relevant in the host event log, but in the guest Application event log I can see these messages around the time I left: A request to disable the Desktop Window Manager was made by process (VMware Tools Service) The Desktop Window Manager was unable to start because composition was disabled by a running application And later, around the time I returned, this shows up in the System log: The system time has changed to ?2012?-?01?-?12T06:36:46.921000000Z from ?2012?-?01?-?12T03:18:19.953079000Z. That seems to support my theory that it's VMware doing something and not Windows itself. The question is: how do I stop it doing that? I want my application to continue running. By the way, the power options are set to never sleep in both guest and host.

  Read the article

• Terminal Server CPU usage at 100%

  - by Light1c3

  I'm running a terminal server with around 50-60 users,and every so often the server will go from 40% usage to 100%. I took a closer look an it seems every time this happens, a different user or two seem to be caught in a loop and end up using < 30% where the rest of the users only use a maximum of 5%. The company behind the software we use clame it's due to the servers inadequate hardware (It's a VM system running on a dual - quad core setup) which to me sounds like BS! I'm fairly new to this level of IT so if I misspoke I apologize. I have no way to prove it but I believe adding more raw hardware power wont do me any good as this to me seems like a bug in their software, and it will suck up as much ( or little) CPU as it's given. The VM in question has 4 vCPU cores and 12 GB RAM available, and is running Windows Server 2008, 64-bit Thanks in advance for your help! Note: I have the same question posted on SO, but was pointed in this direction so just in case, here is a link to the post http://stackoverflow.com/questions/17276602/termserver-cpu-at-100

  Read the article

• Join Domain from VM

  - by Adis

  I have two VMs running on VMWare Player. I use NAT adapter settings. The host machine for VMs is running on corporate network. First VM has Domain controller running and I can log in on that machine using domain credentials. I named domain wm.local When I run IP config on this machine: IP: 192.168.87.132 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 Second VM cannot join domain. When I try it with domain WM I'm propmted for credentials. And I enter Administrator credentials and than it waits for some time and I get response: "The specified domain either does not exist or could not be contacted" If i type wm.local as domain when trying to join it does not prompt me to login but just shows "An Active Directory Domain Controller (AD DC) for the domain wm.local could not be contacted. And here it takes no time to get this error message. Ipconfig on this machine: IP: 192.168.87.134 Def Gataway: 192.168.87.2 DNS server: 192.168.87.2 DHCP server: 192.168.87.254 I can ping second VM from first one. And I disabled firewalls on both machines. Any ideas? Is there any manual for this?

  Read the article

• Where to look for regular scripts?

  - by fontan

  It seems to me that our server freezes every 30 days around noon due to the huge utilization of xvda data transfer partition - writes are 50 times higher than normally (according to the health monitor in plesk). This seems to me as the reason why the apache & co becomes instable as (for example) all apache's processes are waiting to write their log (according to the service's full status). I am, however, unable to find any scheduled task that would be executed during that period. I have checked both cron and anacron setup and there is only one monthly anacron task which is not executed (according to the /var/log/cron - and there is nothing unusual) around noon. Are there any other places where to look for periodical processes? (I am just about to ask server's provider the same question about any external maintenance run around this time but I don't expect them to run anything time/resource consuming during the day.)

  Read the article

• Valid path to deploy vm on host

  - by ELSheepO

  I've recently added a VM to the library in SCVMM to use with MS Test Pro 2010, and run into a problem. I cannot import it using test pro, it just won't give me any option to import in the lab manager. Also, if I try to deploy it back to the host it came from, it gives me a error saying the path is not valid. Anyone have any insight into this? Also, SCVMM seems to freeze everytime I try to create a new VM from the template of the VM I've stored in the library, the same one thats giving me the problem when I try to deploy it on to the host. Thanks.

  Read the article

• VMWare Workstation 8 reporting ""vmx86 driver version invalid handle" problem on booting VM

  - by dommer

  I'm just doing a VMWare Workstation 8 installation. However, on trying to boot (or create) a VM, it's reporting "Could not get vmx86 driver version: The handle is invalid." It recommends reinstalling, which I've done. Also, VMWare Player just hangs. Was going to post on the VMWare forums, but can't seem to create a new discussion (even though I've registered/logged in). It's our own fault for being too eager to upgrade, I guess.

  Read the article

• How to change the setting for a network device reported by ethtool, specifically Speed, on VM?

  - by Ramadheer Singh

  This is related to these two questions, although they don't answer my question. The machines are RHEL6. 1.ethtool not showing all the properties 2.changing network speed to 1000Mb/s Output on VM: [root@foo ~]# ethtool eth0 Settings for eth0: Current message level: 0x00000007 (7) Link detected: yes Output on Real Hardware: (interested in Speed) # ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes ***Speed: 1000Mb/s*** Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on Supports Wake-on: d Wake-on: d Link detected: yes if there's anyway I can set this in VM, please suggest.

  Read the article

• Apache shuts down from time to time

  - by Dugi

  I'm having trouble with my VPS as it keeps shutting apache down at least twice a day. The server is running on CentOS 6 with the latest apache. By shutting down I mean I have to go into SSH and type in this command in order to bring it up again: /sbin/service httpd start I'm not very good with servers and my host doesn't seem to have a nice customer service. Any help would be appreciated as these unexpected downtimes really know to kill one's mood.

  Read the article

• What is shrink_slab, and why is it showing up in /var/log/messages?

  - by Steve Kehlet

  I'm investigating some application issues on a Linux system and noticed this around the time of the most recent problem, but not close enough to be definitively related: Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-155456000 Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-157859400 Jun 7 17:51:49 localhost kernel: shrink_slab: nr=-157833400 Jun 8 06:20:23 localhost kernel: shrink_slab: nr=-284172800 What is this? Googling isn't helping, I get that it's something with VM, but why is it suddenly showing up in /var/log/messages? Edit: I take it it's showing this because the number of pages it could free ("nr") is negative. Which is presumably a bad thing. I found patches for newer kernels that display a more useful message to this effect. Still not sure what this means though, or what I need to do about it.

  Read the article

• VirtualBox OSE: Install Guest OS On Headless Host Via VNC?

  - by Eddie Parker

  I've remotely installed VirtualBox OSE on my Gentoo box at home. I have everything set up and ready for the OS. However all the documentation I've read seems to say that you can only use the PUEL version in order to get remote access during installs - does anyone know if it's possible to do similar with the OSE but using VNC? Links to documentation or tutorials would be welcome, apparently my Google-Fu is failing me, if it's out there. Thanks.

  Read the article

• Is it possible to live-boot VirtualBox from a USB flash drive?

  - by bw.

  To clarify, I'm not asking if you can boot from USB from within VirtualBox. I would like to make a portable version of Windows 7 that I can run from a USB drive on any machine. I'm putting a distro of Linux on my laptop, but I manage a Windows domain at work so I'd like an easier management solution than trying to use Linux tools to interface with a Windows DC(as RDP to a DC is not always an option). The reason I'm inquiring about VirtualBox... I plan on carrying this portable installation with me and using it on multiple machines, so I would like to avoid driver conflicts (which I imagine would happen if I only installed Windows on a flash drive). Basically, I need a way to boot an installation of Windows 7 from USB that still allows me to install/remove/update programs as if it were installed on a standard hard drive, and not freak out over different hardware configurations. Please help, superusers!

  Read the article

• Why is my browser using so much memory?

  - by Steve

  Hi. I've recently had problems with Firefox running very slowly when I have many tabs open; say 20 tabs. My whole system would slow down. I decided to give Google Chrome a try, and it started out fine. But lately I am finding that it too, slows down my whole system. Looking at Task Manager, chrome.exe is using about 250MB of memory in about 6 different entries in task manager. However, when I shut Chrome down, memory usage is reduced by about 600MB. How can this be? (shows drop in memory usage after ending Chrome.) When my system locks up with Chrome having many tabs open, it takes 10 seconds to load the Start Menu, 10 seconds to expand All Programs, and each folder and subfolder, and 30 seconds for the program to be highlighted under my mouse. It also takes 10 seconds to switch to Notepad. Why is Chrome appearing to use so much more memory than Task Manager indicates? Why is my pagefile being used when I have around 1.1GB of memory? Can I set Chrome to run in RAM and not in the pagefile? How can 20 tabs use 600MB? That's 30MB per tab. Thanks for your help.

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

• How to tell Linux to explicitly swap out main memory of suspended process?

  - by Vi

  I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate 2GB and crash draining 2 days of thrashing). When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login). The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown. How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out.

  Read the article

• Unable to create files in a directory

  - by vamsi360

  I have created a directory in Virutalbox. Using VBoxManage, I am executing a script inside the Ubuntu VM directory I created above from Ubuntu host OS. But if the script in the VM contains commands for creating a new file, they are not executing. "echo" commands before and after the touch ommand are working fine. I even used root user for VBoxManage to install. I think the directory is not allowing the files to be created . How can I make a directory in Linux to be 777 to all new files created automatically. I mean, even if I make the directory (chmod 777 dir), I am unable to execute the script from the host. Please help. It may be simple permissions problem. Even root is unable to execute. VBoxManage guestcontrol "Ubuntu_10_04" execute --image "/bin/bash" "/home/cloudlet/Desktop/temp2/three" --username root --password root --verbose --wait-exit --wait-stdout -- -l /usr Please help. I am struggling with this problem for the past one week.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >