Search Results

Search found 9381 results on 376 pages for 'wireless driver'.

Page 84/376 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• Diff bios - corrupt video driver

  - by sfonck

  Hi, I'm using an Dell M90 Precision Laptop which has a NVidia Quadro FX 2500M graphics card and is running Windows XP. Laptop has been running fine - but a few weeks ago screen went 'white' - restarted computer- bios and startup screens show weird green dots and stripes, normal startup only shows a black screen... only VGA mode works to display something. I've been trying to remove and reinstall the correct drivers downloaded from Dell's website - no solution. I gave up and reinstalled XP - everything was working perfect again. 2 weeks later - again the white screen - tried everything again (flashin new bios also - nothing works) Reinstalled XP - everyhting was working again, so I made a DriveSnapShot of the partition. Today - again the 'white screen'. Ok, no problem ...I was thinking all I needed to do was to restore the DriveSnapShot backup... Few minutes later the backup is restored ... but guess what: video driver does not work correctly... As the DriveSnapShot restored the complete partition, as it was at the time everything was working perfectly, this would mean my driver problems are due to 'settings' in the bios or on the graphics-card itself + these 'settings' can get overridden by doing a new XP-install.... I'm out of options, can somebody help me to find a solution for this problem: Is there some way to backup and restore a bios after seeing some problems? Is there some way to know what is causing this problem like a bios diff utility? Thanks!

  Read the article

• wireless clients not getting correct dhcp addresses

  - by szeli

  I apologise first if this is a stupid problem. I'm new to Cisco networking. I need some help with an existing configuration done by my vendor. Environment: 1. Core switch - Catalyst 6509e vlans configured: a. vlan 50 (wired clients) 10.0.50.x/24 interface IP 10.0.50.20 b. vlan 70 (wireless clients) 10.0.70.x/24 interface IP 10.0.70.20 c. vlan 192 (guest clients) 192.168.1.x/24 interface IP 192.168.1.20 d. trunk port for WLC native vlan 70 allowed vlan 50, 70, 192 2. Cisco 4402 WLC interfaces a. management untagged IP 10.0.70.10 b. ap-manager untagged IP 10.0.70.11 c. service-port n/a IP 192.168.10.1 d. virtual n/a IP 1.1.1.1 e. guestwlan vlan192 IP 192.168.1.100 3. Cisco AIR-LAP1142N-S-K9 LAP01 (WLAN local, interface: management) IP 10.0.70.21/24 GW 10.0.70.20 DHCP server 10.0.50.10 (scope 10.0.70.101 to 200) LAP02 (WLAN guest, interface: guestwlan) IP 192.168.1.21/24 GW 192.168.1.20 DHCP server 192.168.1.10 (scope 192.168.1.101 to 200) here's the problem, wireless clients connected to WLAN guest keep getting DHCP leases from WLAN local 10.0.50.10 (scope 10.0.70.101 to 200) can anyone please help? thanks!

  Read the article

• Nokia 5800 v50, getting "Invalid server name" with ad-hoc wlan with Windows 7

  - by Krunal

  After upgrading to v50 firmware in my Nokia 5800 xpress music phone. I am not able to connect to ad-hoc wlan network in my laptop(Windows 7 OS). I have a dialup internet connection and created wireless ad-hoc network to access the internet in my phone. But I am getting "invalid server name" in the phone and my wireless network access type in Windows 7 shows "no internet access". I am able to connect to wlan infrastructure network using 5800 in my office. So my phone is working with wlan and I m able to access internet on it. BUT The problem is "dial up with ICS enabled" and "AD-HOC wlan network" in Windows 7. Can anyone give some solution on it. Or can you provide a guide/tutorial to connect 5800 with adhoc network and dialup internet in Windows 7. System: Windows 7 Dial up internet connection with ICS enabled. Ad-Hoc wireless network with WEP Nokia 5800 Xpress Music phone Note: I have read other posts also and tried their solutions but didn't worked for me. the first solution is to bridge the network and access it. but how can I bridge the dialup and wlan netwok? second solution is manually configure IP and DNS addresses in phone. But what should I add as IP and DNS as my dial up and adhoc network have automatic addresses.

  Read the article

• Is encryption really needed for having network security? [closed]

  - by Cawas

  I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. So, what do you think?

  Read the article

• Virtual Wifi Issue Windows 7

  - by Matt

  Lately I've been trying to use my laptop as a wireless router in my room. I have it connected to my school's network through ethernet, and I want to set up wireless so that I can use Wifi on my Android phone and iPod Touch. In the past, I used Connectify, but I started having an issue where my phone would find the network, connect, attempt to get the IP, and then suddenly the network would disappear. Then it'd pop up again, and the same process would happen over and over. I decided that I'd totally uninstall Connectify, but after that, neither Virtual Router Manager nor the command prompt could create a viable network either. My phone and even my iPod now encounter the same problem. Neither can successfully connect. So evidently there is something wrong with the laptop's virtual wifi feature, and I have no idea what that could be. I've tried enabling certain services that virtual wifi supposedly relies on, but some of them don't start, namely Remote Access Connection Manager. But I also have read that these enable on their own and that if they are normally not enabled it's fine. Furthermore, I even uninstalled and reinstalled the drivers for my wireless card. Any ideas as to why my virtual wifi won't function? Anything? I really would love to get this working...

  Read the article

• What kernel modules are required for wi-fi to work?

  - by Leonid Shevtsov

  My custom-built 2.6.32 kernel cannot connect to any WPA-protected network. The kernel includes (probably?) everything that should be needed for wifi, including IPv4 network support (IPv6 is disabled), the ath5k wireless driver (which is used in the generic Ubuntu 2.6.31 kernel) and all crypto APIs. The card is being detected, however, iwlist scan returns wlan0 Failed to read scan data : Network is down and network-manager log says <info> (wlan0): driver supports SSID scans (scan_capa 0x01). <info> (wlan0): new 802.11 WiFi device (driver: 'ath5k') <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/1 <info> (wlan0): now managed <info> (wlan0): device state change: 1 -> 2 (reason 2) <info> (wlan0): bringing up device. <info> (wlan0): preparing device. <info> (wlan0): deactivating device (reason: 2). supplicant_interface_acquire: assertion `mgr_state == NM_SUPPLICANT_MANAGER_STATE_IDLE' failed <info> modem-manager is now available <WARN> default_adapter_cb(): bluez error getting default adapter: The name org.bluez was not provided by any .service files <info> Trying to start the supplicant... <info> (wlan0): supplicant manager state: down -> idle <info> (wlan0): device state change: 2 -> 3 (reason 0) <WARN> nm_supplicant_interface_add_cb(): Unexpected supplicant error getting interface: wpa_supplicant couldn't grab this interface. The exact same configuration works with the generic kernel. Is anything except wifi and crypto api needed for wi-fi to work?

  Read the article

• Turning on Bluetooth disables wifi on Yoga 2

  - by Yostage

  I have a Lenovo Yoga 2. The moment that I turn on bluetooth, the wifi drops out - I lose connection, and connecting again shows "connection failed". If I turn the bluetooth off, wifi can reestablish fine. I've tried lots of different combinations of drivers for both the wifi and the bluetooth, but no combination has has changed this behavior yet. I've read some speculation that the cards have insufficient shielding, but that seems like kind of a large flaw to ship with. I've tried with a Carbon X1, a Yoga 2 Pro, and a Yoga 2 all next to each other on the desk while running InSSIDer. The X1 and the Y2P don't lose wifi connection when the bluetooth turns on, but the Y2 does immediately. The Y2P and the Y2 are running the same drivers for bluetooth and wifi, and appear to have the same wireless card internally. During the failure state, InSSIDer still sees signal strength for my network, but I cannot connect to it. stats: the card that comes in the laptop is an Intel Wireless-N 7260 Intel Bluetooth driver is at 17.0.1401.422 Intel Wireless driver is at 17.0.2.5 Windows 8.1 x64 Home wifi is a Medialink MWN-WAPR150N

  Read the article

• Number of routers in small community lock up and require reboot.

  - by Anthony Hiscox

  I live in a small town which has one primary ISP. Lately I have noticed that a number of wireless routers have been locking up and requiring a reboot before allowing any connections. This has affected two of my routers, my work router, and a few others. In all cases wired continued to function as usual. Often wireless clients can see the SSID but simply won't connect. I can only think of a few possibilities and was hoping someone here might be able to point me in the right direction: Our ISP is well known to be flaky, something they are doing is causing this, what that might be I have no clue it as seems to affect the wireless only. There's a power issue in town, given our remote location and reputation for crap electrical, this seems reasonable. Only one router was plugged in to a UPS, and I'm not sure of the quality. There is some bug in all the different firmware for every one of these routers (all different). That doesn't seem reasonable, unless; it's an unknown (or known) exploit or DoS of some sort being launched by a massive team of ninjas hell bent on forcing us all to be tethered to our walls by ethernet cables or; it's just been a coincidence and I'm just paranoid (this has some weight, I mean read 4 again). Anyone else experience similar issues and have some tips?

  Read the article

• can't get to admin page after factory reset netgear wg602

  - by stefanB

  I have wireless Netgear wg602 on my home network (connected to my internet modem/router). I've had it secured and locked down to only accept connection from specific MAC addresses. I've forgotten the password that I used but my Mac Book laptops can still connect (multiple OS updates - it can't retrieve and display the password but it can use it to log in to WPA) so I want to reconfigure it from scratch (have some new devices). I tried to reset the Netgear wg602 to factory settings (pressed reset button for 10 sec), reset my laptop IP address to local address suggested in manual (192.168.0.210 net mask 255.255.255.0), connect Netgear via ethernet cable to my mac book pro but I can't get to the admin page at 192.168.0.227 as suggested by manual (firefox or safari). At this stage the Netgear is not connected to router, it is only connected to mac book. I can't ping the wireless access point either (but it is on all lights are on). What am I doing incorrectly? Last time I configured it via Windows now I only have Mac Book (which I've used with the wireless access point for 2 years so no compatibility problems).

  Read the article

• How to monitor bandwidth use of each device on wifi network

  - by GWLlosa

  I have in my home a standard Comcast cable internet connection. I have it going from the wall to a cable modem, and from the modem to a late-series Linksys router, which provides wired and wireless networking. The vast majority of the users are wireless connections. For day-to-day tasks, this connection is fully sufficient for all my needs. However, on regular occassions, we have social gatherings that involve many people bringing laptops and other PCs and using the network and internet simultaneously, frequently for gaming. I have no administrative oversight over these machines; they have been known to be riddled with spyware and/or bloatware or be running torrents, legal or otherwise. The only reason I care is that on a regular basis, one of the machines will flatline my internet bandwith, and consume it all in order to upload/download/spam people/whatever. When this happens, the latency of the connections for gaming and the like becomes unacceptable, and everyone suffers. My question is: Is there a system I can set up whereby I can easily monitor the various systems connected to my wireless connection, see how much bandwith each one is using, and for what ends? That way, at a glance, I can spot the offending machine and kick it from the connection, without having to go from machine to machine, checking each one's "bandwith used" properties manually, and dealing with the owner's indignant protests all the while. I understand this will likely involve 3rd-party software and/or hardware; my issue is I don't even know where to begin.

  Read the article

• Can Internet data be used by malware when PC off?

  - by Val

  I have noticed over the last month that my off peak data has been used at a rate of approx 350MB per hour - this has meant that I have gone over my quota and slowed down by my ISP to 256k. There is no one in the house using it (2am-8am is my ISPs off peak hours) at that time. My PC and other wireless devices (ipad and iphone) are turned off. I have changed the wireless password on my modem 3 times and it is now 30 digits long. So I don't think someone else is using my wireless access between 2-8am. It has been suggested by my ISP that I may have malware/spyware on my computer. Sorry for my ignorance, but can malware still run if the PC is off? I did look at my modem's log and followed an IP address to a service called Amazon Simple server Storage. Could this company possibly be the culprit? I am not too tech savvy, so any assistance appreciated. I have run a barrage of spyware cleaning software eg malware bytes; spy bot etc.... Cheers Val

  Read the article

• A router that supports connecting with 2 different wifi networks

  - by Allan Deamon

  I Have the following setup in one place: We have a small local ISP through wireless. I have a external parabolic antenna, connected to a external usb wifi radio, connected through USB to a desktop old PC. The pc connects do the ISP wiki network, then do a Dial Up (PPPoE) connection through the this wifi setup. This will expand with others mobiles devices to be used. When I need, I take my home wireless router and connect though Ethernet in the PC, which is shares the internet. The problem is that the PC must be always ON and working. I would like to buy a wireless router which could be an AP to the mobile devices, notebooks, etc, as also could connect to the ISP Wifi/PPPoE network. So, this device must: Have one radio with detachable antenna to connect to the external antenna. It must connect as client to a network and then dial up the PPP Have another radio serving as AP (infrastructure) to the local place This can't be very expensive. I found a candidate: ( http://www.tp-link.com/en/products/details/?categoryid=1682&model=TL-WR2543ND ) It have 3 deatachable antennas, working with dual band. Officially, his firmware doesn't support it. My supposition: If internally there is 3 or 2 distinct wlan ports (like wlan0, wlan1), and there is support, i could use a OpenWRT, DD-WRT or Tomato to make this works. It also have 1 USB port, which I cold use to connect my actual USB Wifi card on it instead to the old PC. Another alternative, is a router that can do this out of box, with the original firmware. But I don't think this is a easy thing to find.

  Read the article

• Ubuntu 10.04 network manager issues

  - by Shark

  I was using the default network manager to connect to my wi-fi network, but if the connection is dropped or router restarted the network manager wont reconnect automatically after i guess a couple of tries and just gives a pop-up to connect manually . To avoid this annoyance I installed WICD but though it does try to reconnect to the network after a drop in connection it is unable to resolve the ip address and i am left with an even bigger annoyance . 1. Is there a way to counter either of these issues ? 2. Something like a background process that will check network status periodically and then try to connect to a favored network ? Edit- out put of lshw -C network *-network description: Wireless interface product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 logical name: eth1 version: 01 serial: c0:cb:38:18:9b:7f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.60.48.36 ip=192.168.11.2 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:fbc00000-fbc03fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:13:00.0 logical name: eth0 version: 02 serial: f0:4d:a2:94:2d:74 size: 10MB/s capacity: 100MB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s resources: irq:29 ioport:e000(size=256) memory:d0b10000-d0b10fff(prefetchable) memory:d0b00000-d0b0ffff(prefetchable) memory:fb200000-fb21ffff(prefetchable)

  Read the article

• How can I start hostednetwork on Windows 7?

  - by Pirozek

  When I type in admin console command to start hostednetwork netsh wlan start hostednetwork it gives me this: The hosted network couldn't be started. The group or resource is not in the correct state to perform the requested operation. There is a hotfix from Microsoft but it didn't help me. Any advice? C:\Users\Pirozek>netsh wlan show driver Interface name: Wireless Network Connection 3 Driver : D-Link AirPlus DWL-G520 Wireless PCI Adapter(rev .B) Vendor : Atheros Communications Inc. Provider : Atheros Communications Inc. Date : 8.7.2009 Version : 8.0.0.171 INF file : C:\Windows\INF\oem108.inf Files : 2 total C:\Windows\system32\DRIVERS\athrx.sys C:\Windows\system32\drivers\vwifibus.sys Type : Native Wi-Fi Driver Radio types supported : 802.11b 802.11g FIPS 140-2 mode supported : Yes Hosted network supported : Yes Authentication and cipher supported in infrastructure mode: Open None Open WEP-40bit Shared WEP-40bit Open WEP-104bit Shared WEP-104bit Open WEP Shared WEP WPA-Enterprise TKIP WPA-Personal TKIP WPA2-Enterprise TKIP WPA2-Personal TKIP Vendor defined TKIP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA-Enterprise CCMP WPA-Personal CCMP WPA2-Enterprise CCMP Vendor defined CCMP WPA2-Enterprise Vendor defined Vendor defined Vendor defined WPA2-Personal CCMP Authentication and cipher supported in ad-hoc mode: Open None Open WEP-40bit Open WEP-104bit Open WEP WPA2-Personal CCMP

  Read the article

• linux shutdown hang with wifi cifs mounts

  - by Sirex

  Since fedora 15 (and now with 16) it seems that wireless clients take a long while to shutdown when they have network filesystems mounted at shutdown time. I've pushed out a cifs mount via puppet, and all clients have it, including those on wireless. If say a laptop is on a wired connection it shuts down just fine, but if its on the wifi at the time (and no wired connection) it'll hang at the fedora f logo. I'm not sure if its indefinite or just a really long while, but ill give it a test when i shut this machine down in a second. Needless to say its pretty annoying, so is there a way of causing the machine to shutdown even if network connectivity has been lost at unmount time, -- or an official way to reorder events so the wireless card is kept up until after the unmount happens during the shut down process (short of writing a custom script for shutdowns which is a bit of a kludge) ? It does this on multiple machines, and all started doing it when we went from fedora 14 to 15. It was such an obvious issue i'd kind of assumed someone must have reported it or there was an easy fix, but i've not discovered anything yet. Additional info: I can confirm that manually unmounting the mounts then shutting down (sudo shutdown or the xfce shutdown button) will shutdown just fine, it only hangs if the mounts are still mounted The puppet config that sets the mount looks like this (now with the _netdev entry that is indeed pushed to clients successfully, but makes no difference): file { "/mnt/share": ensure = directory,} mount { "/mnt/share": atboot = true, ensure = mounted, remounts = false, fstype = cifs, device = "//srv/share", options = "user,gid=shareusers,uid=${user},file_mode=0700,dir_mode=0700,credentials=/root/.smbcreds,_netdev", require = [ File["/mnt/share"], Group["shareusers"] ], } }

  Read the article

• Wi-Fi won't automatically connect (box in Windows configuration gets unchecked)

  - by greg88

  The checkbox that says "Use windows to configure my wireless network settings" keeps getting unchecked (Wirless Network Connection - Change advanced settings - Wireless networks tab.) How do I stop that from happening? (So the wi-fi will reconnect.) When I manually re-check the box, it automatically connects.) I have a D-Link AirPremier DWL-G550 PCI adapter. I installed the newest driver, 5.3.0.46, and that didn't solve the problem. I took the "Atheros Client Utility" (the program window says "D-Link AirPremier Client Utility" when you run it) out of the start menu, rebooted, and that didn't solve the problem. (That utility puts a signal bar similiar to the one MS Windows puts there, and it's gone now.) The D-Link client utility has an option to automatically connect to preferred networks, but it is greyed out. It is also greyed out if I install the driver and utility right off the D-Link installation CD, so the problem isn't that the utility and driver are incompatible versions. I want to use Windows to handle the connection anyway, as the D-Link utility is garbage. Windows XP SP3 w/all current updates.

  Read the article

• Loading latest firmware iwlwifi-6000

  - by grzeh

  I just installed 11.10 on Dell XPS 15z. Somebody know why kernel does not load the latest firmware for wifi Intel Centrino Advanced-N 6230. $ modinfo iwlagn |grep iwlwifi-6000 firmware: iwlwifi-6000g2b-5.ucode firmware: iwlwifi-6000g2a-5.ucode firmware: iwlwifi-6000-4.ucode In package linux-firmware there is latest version (iwlwifi-6000g2b-6.ucode) $ dpkg -L linux-firmware | grep iwlwifi-6000 /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-6000g2b-5.ucode **/lib/firmware/iwlwifi-6000g2b-6.ucode**

  Read the article

• No internet via wifi/ethernet after 14.04 upgrade

  - by Rhys Evans

  I have just updated to Ubuntu 14.04 LTS on my laptop, and I seem to be having some internet problems. I have no internet connection through wifi or Ethernet, after both working in the previous version. I am not at all knowledgeable of Ubuntu and its workings, so if you could just tell me what to do, what to show you by just telling me commands etc. I think would be the only way I will understand sorry! I am asking this after many searches, all being in vein after needing a step involving some sort of internet access, which I can't get! So sorry if it has been answered somewhere, if so, please send me there! Cheers This is what I get when using sudo lspci -v: lspci -v

  Read the article

• How to fix “Module ndiswrapper not found"

  - by jason328

  I have Ubuntu 12.10 and whenever I run sudo modprobe ndiswrapper, I get the following error. FATAL: Module ndiswrapper not found. The command dkms status returns with... ndiswrapper, 1.57, 3.2.0-32-generic, i686: installed The make.log in ndiswrapper returns with... DKMS make.log for ndiswrapper-1.57 for kernel 3.5.0-18-generic (i686) Wed Nov 7 22:16:12 EST 2012 make -C /usr/src/linux-headers-3.5.0-18-generic M=/var/lib/dkms/ndiswrapper /1.57/build make[1]: Entering directory `/usr/src/linux-headers-3.5.0-18-generic' LD /var/lib/dkms/ndiswrapper/1.57/build/built-in.o MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/crt_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/hal_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ndis_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ntoskernel_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/ntoskernel_io_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/rtl_exports.h MKEXPORT /var/lib/dkms/ndiswrapper/1.57/build/usb_exports.h CC [M] /var/lib/dkms/ndiswrapper/1.57/build/crt.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/hal.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/iw_ndis.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/loader.o CC [M] /var/lib/dkms/ndiswrapper/1.57/build/ndis.o /var/lib/dkms/ndiswrapper/1.57/build/ndis.c: In function ‘NdisGetCurrentProcessorCounts’: /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2657:24: error: ‘struct kernel_stat’ has no member named ‘cpustat’ /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2658:31: error: ‘struct kernel_stat’ has no member named ‘cpustat’ /var/lib/dkms/ndiswrapper/1.57/build/ndis.c:2659:17: error: ‘struct kernel_stat’ has no member named ‘cpustat’ make[2]: *** [/var/lib/dkms/ndiswrapper/1.57/build/ndis.o] Error 1 make[1]: *** [_module_/var/lib/dkms/ndiswrapper/1.57/build] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.5.0-18-generic' make: *** [modules] Error 2 I have installed commons, utils-1.9, dkms, source but it's still returning this error. How do I fix this?

  Read the article

• How do install graphics drivers for radeon HD 6380g on a HP pavilion g6?

  - by Ryan

  I installed ubuntu from wubi using a live cd but when i booted i just got a black screen so i followed the instructions from this forum http://ubuntuforums.org/showpost.php?p=10089820&postcount=8 which successfully completed the ubuntu installation but now when i boot ubuntu i just get a command prompt. when i type in startx it comes up with an error. I am told i need to install graphics drivers, how do i do this? Thanks in advance Ryan

  Read the article

• Weird Net Connection problem

  - by Sarthak

  hullo folks....this is my first thread here Ok,i first installed ubuntu 11.10 the day it released on my old laptop...internet worked fine without configuring anything so now,i installed ubuntu 11.10 on my newer laptop.But it says ,"device not ready(firmware missing". Windows 7 worked absolutely fine on it i also tried using a Netgear routed i use on my HDTV,but ubuntu doesnt detect it Any Help? Thanks in advance Peace Log of lspci command sarthak@sarthak:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03) 04:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 07:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02)

  Read the article

• MP3 player mpman TS300 not recognized

  - by Nick Lemaire

  I just received a mpman ts300 mp3 player for Christmas. But when I try to connect it to ubuntu (10.10) through usb it doesn't seem to be recognized. I searched for a linuxdriver but came up with nothing. I even tried installing mpman manager from the software center, but still the same problem... Has anybody got any ideas about how to fix this? Thank you edit: some additional information When I plug it in, it doesn't show up under /dev. And it is not listed in the result of 'lsusb' This is the output of 'dmesg' [19571.732541] usb 1-4: new high speed USB device using ehci_hcd and address 2 [19571.889154] scsi7 : usb-storage 1-4:1.0 [19572.883155] scsi 7:0:0:0: Direct-Access TS300 USB DISK 1.00 PQ: 0 ANSI: 0 [19572.885856] sd 7:0:0:0: Attached scsi generic sg2 type 0 [19572.887266] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19573.012547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.292550] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.572565] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19573.725019] sd 7:0:0:0: [sdb] Test WP failed, assume Write Enabled [19573.725024] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19573.728521] sd 7:0:0:0: [sdb] Attached SCSI removable disk [19575.333015] sd 7:0:0:0: [sdb] 7868416 512-byte logical blocks: (4.02 GB/3.75 GiB) [19575.452547] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19580.603253] usb 1-4: device descriptor read/all, error -110 [19580.722560] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19595.842579] usb 1-4: device descriptor read/64, error -110 [19611.072656] usb 1-4: device descriptor read/64, error -110 [19611.302540] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19616.332568] usb 1-4: device descriptor read/8, error -110 [19621.462692] usb 1-4: device descriptor read/8, error -110 [19621.692551] usb 1-4: reset high speed USB device using ehci_hcd and address 2 [19626.722567] usb 1-4: device descriptor read/8, error -110 [19631.852802] usb 1-4: device descriptor read/8, error -110 [19631.962587] usb 1-4: USB disconnect, address 2 [19631.962587] sd 7:0:0:0: Device offlined - not ready after error recovery [19631.962840] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965104] sd 7:0:0:0: [sdb] READ CAPACITY failed [19631.965109] sd 7:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [19631.965112] sd 7:0:0:0: [sdb] Sense not available. [19631.965125] sd 7:0:0:0: [sdb] Assuming drive cache: write through [19631.965130] sdb: detected capacity change from 4028628992 to 0 [19632.130042] usb 1-4: new high speed USB device using ehci_hcd and address 3 [19647.242550] usb 1-4: device descriptor read/64, error -110 [19662.472560] usb 1-4: device descriptor read/64, error -110 [19662.702566] usb 1-4: new high speed USB device using ehci_hcd and address 4 [19677.822587] usb 1-4: device descriptor read/64, error -110 [19693.052575] usb 1-4: device descriptor read/64, error -110 [19693.282582] usb 1-4: new high speed USB device using ehci_hcd and address 5 [19698.312600] usb 1-4: device descriptor read/8, error -110 [19703.442594] usb 1-4: device descriptor read/8, error -110 [19703.672548] usb 1-4: new high speed USB device using ehci_hcd and address 6 [19708.702581] usb 1-4: device descriptor read/8, error -110 [19713.840077] usb 1-4: device descriptor read/8, error -110 [19713.942555] hub 1-0:1.0: unable to enumerate USB device on port 4 [19714.262545] usb 4-2: new full speed USB device using uhci_hcd and address 2 [19729.382549] usb 4-2: device descriptor read/64, error -110 [19744.612534] usb 4-2: device descriptor read/64, error -110 [19744.842543] usb 4-2: new full speed USB device using uhci_hcd and address 3 [19759.962714] usb 4-2: device descriptor read/64, error -110 [19775.200047] usb 4-2: device descriptor read/64, error -110 [19775.422630] usb 4-2: new full speed USB device using uhci_hcd and address 4 [19780.444498] usb 4-2: device descriptor read/8, error -110 [19785.574491] usb 4-2: device descriptor read/8, error -110 [19785.802547] usb 4-2: new full speed USB device using uhci_hcd and address 5 [19790.824490] usb 4-2: device descriptor read/8, error -110 [19795.961473] usb 4-2: device descriptor read/8, error -110 [19796.062556] hub 4-0:1.0: unable to enumerate USB device on port 2

  Read the article

• Hardening network with sysctl settings made Wi-fi downloading speed extremely slow

  - by Rohit Bansal

  I just followed up following steps to harden network security The /etc/sysctl.conf file contain all the sysctl settings. Prevent source routing of incoming packets and log malformed IP's enter the following in a terminal window: sudo vi /etc/sysctl.conf Edit the `/etc/sysctl.conf` file and un-comment or add the following lines : # IP Spoofing protection net.ipv4.conf.all.rp_filter = 1 net.ipv4.conf.default.rp_filter = 1 # Ignore ICMP broadcast requests net.ipv4.icmp_echo_ignore_broadcasts = 1 # Disable source packet routing net.ipv4.conf.all.accept_source_route = 0 net.ipv6.conf.all.accept_source_route = 0 net.ipv4.conf.default.accept_source_route = 0 net.ipv6.conf.default.accept_source_route = 0 # Ignore send redirects net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.default.send_redirects = 0 # Block SYN attacks net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_syn_backlog = 2048 net.ipv4.tcp_synack_retries = 2 net.ipv4.tcp_syn_retries = 5 # Log Martians net.ipv4.conf.all.log_martians = 1 net.ipv4.icmp_ignore_bogus_error_responses = 1 # Ignore ICMP redirects net.ipv4.conf.all.accept_redirects = 0 net.ipv6.conf.all.accept_redirects = 0 net.ipv4.conf.default.accept_redirects = 0 net.ipv6.conf.default.accept_redirects = 0 # Ignore Directed pings net.ipv4.icmp_echo_ignore_all = 1 To reload sysctl with the latest changes, enter: sudo sysctl -p But, after applying the changes I found "Wi-fi" downloading speed and terminal downloading speed extremely slow (less than 1KB/s) however surfing speed through browser was good. But, using direct ethernet cable was giving a good speed. Then, I reverted back the above changes and things fall back in line once again.... Could you please let me know what possibly in above script is affecting such behaviour [and why] ? How could I still maintain hardening of network security without disturbing Wi-fi downloading speed ?

  Read the article

• Installing Ubuntu on a computer with USB 3.0 hardware

  - by Matt

  I'm installing Ubuntu 10.10 32-bit version on an HP Envy 15. I get the same problem these people have here: "unable to find a medium containing a live file system" error when installing but the question was never resolved. I spent so long researching and got so frustrated that I took my computer down to a shop and asked them to install it for me. It took them a while but they managed to get it installed. The reason for this error they had said was because Ubuntu didn't have the USB 3.0 drivers it needed to install properly. I'm reinstalling Ubuntu yet again and I've run into the same issue so my question is: does anyone know.. a) Where to get these USB 3.0 drivers? b) How to get them installed when installing the Ubuntu OS? Thanks, Matt

  Read the article

• Dell Inspiron 1120 Ubuntu Light -> Desktop and now I'm having problems with wifi and suspend

  - by David N. Welton

  I got a Dell Inspiron 1120 which ships with Ubuntu Light, as well as Windows. My wife prefers Ubuntu, but obviously outside of web stuff, you can't do a lot with Light, so I went ahead and installed the Desktop version of Ubuntu (10.10 / maverick). Whereas before it suspended beautifully and connected to wifi networks flawlessly, it now displays the following problems: It seems to suspend ok, but on resume, the screen remains blank, even though the computer appears to wake up again. Wifi doesn't connect. I tried using the suggested proprietary drivers, and those don't seem to change the situation. All in all, a bit frustrating to run into these sorts of "regressions" - does anyone know what sort of drivers and such Ubuntu Light might have shipped with for this computer that made it work so well? Unfortunately, I wiped the disk in order to install the Desktop version of Ubuntu.

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >