Search Results

Search found 21692 results on 868 pages for 'win key'.

Page 842/868 | < Previous Page | 838 839 840 841 842 843 844 845 846 847 848 849  | Next Page >

• The Great Divorce

  - by BlackRabbitCoder

  I have a confession to make: I've been in an abusive relationship for more than 17 years now.  Yes, I am not ashamed to admit it, but I'm finally doing something about it. I met her in college, she was new and sexy and amazingly fast -- and I'd never met anything like her before.  Her style and her power captivated me and I couldn't wait to learn more about her.  I took a chance on her, and though I learned a lot from her -- and will always be grateful for my time with her -- I think it's time to move on. Her name was C++, and she so outshone my previous love, C, that any thoughts of going back evaporated in the heat of this new romance.  She promised me she'd be gentle and not hurt me the way C did.  She promised me she'd clean-up after herself better than C did.  She promised me she'd be less enigmatic and easier to keep happy than C was.  But I was deceived.  Oh sure, as far as truth goes, it wasn't a complete lie.  To some extent she was more fun, more powerful, safer, and easier to maintain.  But it just wasn't good enough -- or at least it's not good enough now. I loved C++, some part of me still does, it's my first-love of programming languages and I recognize its raw power, its blazing speed, and its improvements over its predecessor.  But with today's hardware, at speeds we could only dream to conceive of twenty years ago, that need for speed -- at the cost of all else -- has died, and that has left my feelings for C++ moribund. If I ever need to write an operating system or a device driver, then I might need that speed.  But 99% of the time I don't.  I'm a business-type programmer and chances are 90% of you are too, and even the ones who need speed at all costs may be surprised by how much you sacrifice for that.   That's not to say that I don't want my software to perform, and it's not to say that in the business world we don't care about speed or that our job is somehow less difficult or technical.  There's many times we write programs to handle millions of real-time updates or handle thousands of financial transactions or tracking trading algorithms where every second counts.  But if I choose to write my code in C++ purely for speed chances are I'll never notice the speed increase -- and equally true chances are it will be far more prone to crash and far less easy to maintain.  Nearly without fail, it's the macro-optimizations you need, not the micro-optimizations.  If I choose to write a O(n2) algorithm when I could have used a O(n) algorithm -- that can kill me.  If I choose to go to the database to load a piece of unchanging data every time instead of caching it on first load -- that too can kill me.  And if I cross the network multiple times for pieces of data instead of getting it all at once -- yes that can also kill me.  But choosing an overly powerful and dangerous mid-level language to squeeze out every last drop of performance will realistically not make stock orders process any faster, and more likely than not open up the system to more risk of crashes and resource leaks. And that's when my love for C++ began to die.  When I noticed that I didn't need that speed anymore.  That that speed was really kind of a lie.  Sure, I can be super efficient and pack bits in a byte instead of using separate boolean values.  Sure, I can use an unsigned char instead of an int.  But in the grand scheme of things it doesn't matter as much as you think it does.  The key is maintainability, and that's where C++ failed me.  I like to tell the other developers I work with that there's two levels of correctness in coding: Is it immediately correct? Will it stay correct? That is, you can hack together any piece of code and make it correct to satisfy a task at hand, but if a new developer can't come in tomorrow and make a fairly significant change to it without jeopardizing that correctness, it won't stay correct. Some people laugh at me when I say I now prefer maintainability over speed.  But that is exactly the point.  If you focus solely on speed you tend to produce code that is much harder to maintain over the long hall, and that's a load of technical debt most shops can't afford to carry and end up completely scrapping code before it's time.  When good code is written well for maintainability, though, it can be correct both now and in the future. And you know the best part is?  My new love is nearly as fast as C++, and in some cases even faster -- and better than that, I know C# will treat me right.  Her creators have poured hundreds of thousands of hours of time into making her the sexy beast she is today.  They made her easy to understand and not an enigmatic mess.  They made her consistent and not moody and amorphous.  And they made her perform as fast as I care to go by optimizing her both at compile time and a run-time. Her code is so elegant and easy on the eyes that I'm not worried where she will run to or what she'll pull behind my back.  She is powerful enough to handle all my tasks, fast enough to execute them with blazing speed, maintainable enough so that I can rely on even fairly new peers to modify my work, and rich enough to allow me to satisfy any need.  C# doesn't ask me to clean up her messes!  She cleans up after herself and she tries to make my life easier for me by taking on most of those optimization tasks C++ asked me to take upon myself.  Now, there are many of you who would say that I am the cause of my own grief, that it was my fault C++ didn't behave because I didn't pay enough attention to her.  That I alone caused the pain she inflicted on me.  And to some extent, you have a point.  But she was so high maintenance, requiring me to know every twist and turn of her vast and unrestrained power that any wrong term or bout of forgetfulness was met with painful reminders that she wasn't going to watch my back when I made a mistake.  But C#, she loves me when I'm good, and she loves me when I'm bad, and together we make beautiful code that is both fast and safe. So that's why I'm leaving C++ behind.  She says she's changing for me, but I have no interest in what C++0x may bring.  Oh, I'll still keep in touch, and maybe I'll see her now and again when she brings her problems to my door and asks for some attention -- for I always have a soft spot for her, you see.  But she's out of my house now.  I have three kids and a dog and a cat, and all require me to clean up after them, why should I have to clean up after my programming language as well?

  Read the article

• Developing a Cost Model for Cloud Applications

  - by BuckWoody

  Note - please pay attention to the date of this post. As much as I attempt to make the information below accurate, the nature of distributed computing means that components, units and pricing will change over time. The definitive costs for Microsoft Windows Azure and SQL Azure are located here, and are more accurate than anything you will see in this post: http://www.microsoft.com/windowsazure/offers/  When writing software that is run on a Platform-as-a-Service (PaaS) offering like Windows Azure / SQL Azure, one of the questions you must answer is how much the system will cost. I will not discuss the comparisons between on-premise costs (which are nigh impossible to calculate accurately) versus cloud costs, but instead focus on creating a general model for estimating costs for a given application. You should be aware that there are (at this writing) two billing mechanisms for Windows and SQL Azure: “Pay-as-you-go” or consumption, and “Subscription” or commitment. Conceptually, you can consider the former a pay-as-you-go cell phone plan, where you pay by the unit used (at a slightly higher rate) and the latter as a standard cell phone plan where you commit to a contract and thus pay lower rates. In this post I’ll stick with the pay-as-you-go mechanism for simplicity, which should be the maximum cost you would pay. From there you may be able to get a lower cost if you use the other mechanism. In any case, the model you create should hold. Developing a good cost model is essential. As a developer or architect, you’ll most certainly be asked how much something will cost, and you need to have a reliable way to estimate that. Businesses and Organizations have been used to paying for servers, software licenses, and other infrastructure as an up-front cost, and power, people to the systems and so on as an ongoing (and sometimes not factored) cost. When presented with a new paradigm like distributed computing, they may not understand the true cost/value proposition, and that’s where the architect and developer can guide the conversation to make a choice based on features of the application versus the true costs. The two big buckets of use-types for these applications are customer-based and steady-state. In the customer-based use type, each successful use of the program results in a sale or income for your organization. Perhaps you’ve written an application that provides the spot-price of foo, and your customer pays for the use of that application. In that case, once you’ve estimated your cost for a successful traversal of the application, you can build that into the price you charge the user. It’s a standard restaurant model, where the price of the meal is determined by the cost of making it, plus any profit you can make. In the second use-type, the application will be used by a more-or-less constant number of processes or users and no direct revenue is attached to the system. A typical example is a customer-tracking system used by the employees within your company. In this case, the cost model is often created “in reverse” - meaning that you pilot the application, monitor the use (and costs) and that cost is held steady. This is where the comparison with an on-premise system becomes necessary, even though it is more difficult to estimate those on-premise true costs. For instance, do you know exactly how much cost the air conditioning is because you have a team of system administrators? This may sound trivial, but that, along with the insurance for the building, the wiring, and every other part of the system is in fact a cost to the business. There are three primary methods that I’ve been successful with in estimating the cost. None are perfect, all are demand-driven. The general process is to lay out a matrix of: components units cost per unit and then multiply that times the usage of the system, based on which components you use in the program. That sounds a bit simplistic, but using those metrics in a calculation becomes more detailed. In all of the methods that follow, you need to know your application. The components for a PaaS include computing instances, storage, transactions, bandwidth and in the case of SQL Azure, database size. In most cases, architects start with the first model and progress through the other methods to gain accuracy. Simple Estimation The simplest way to calculate costs is to architect the application (even UML or on-paper, no coding involved) and then estimate which of the components you’ll use, and how much of each will be used. Microsoft provides two tools to do this - one is a simple slider-application located here: http://www.microsoft.com/windowsazure/pricing-calculator/  The other is a tool you download to create an “Return on Investment” (ROI) spreadsheet, which has the advantage of leading you through various questions to estimate what you plan to use, located here: https://roianalyst.alinean.com/msft/AutoLogin.do?d=176318219048082115  You can also just create a spreadsheet yourself with a structure like this: Program Element Azure Component Unit of Measure Cost Per Unit Estimated Use of Component Total Cost Per Component Cumulative Cost               Of course, the consideration with this model is that it is difficult to predict a system that is not running or hasn’t even been developed. Which brings us to the next model type. Measure and Project A more accurate model is to actually write the code for the application, using the Software Development Kit (SDK) which can run entirely disconnected from Azure. The code should be instrumented to estimate the use of the application components, logging to a local file on the development system. A series of unit and integration tests should be run, which will create load on the test system. You can use standard development concepts to track this usage, and even use Windows Performance Monitor counters. The best place to start with this method is to use the Windows Azure Diagnostics subsystem in your code, which you can read more about here: http://blogs.msdn.com/b/sumitm/archive/2009/11/18/introducing-windows-azure-diagnostics.aspx This set of API’s greatly simplifies tracking the application, and in fact you can use this information for more than just a cost model. After you have the tracking logs, you can plug the numbers into ay of the tools above, which should give a representative cost or in some cases a unit cost. The consideration with this model is that the SDK fabric is not a one-to-one comparison with performance on the actual Windows Azure fabric. Those differences are usually smaller, but they do need to be considered. Also, you may not be able to accurately predict the load on the system, which might lead to an architectural change, which changes the model. This leads us to the next, most accurate method for a cost model. Sample and Estimate Using standard statistical and other predictive math, once the application is deployed you will get a bill each month from Microsoft for your Azure usage. The bill is quite detailed, and you can export the data from it to do analysis, and using methods like regression and so on project out into the future what the costs will be. I normally advise that the architect also extrapolate a unit cost from those metrics as well. This is the information that should be reported back to the executives that pay the bills: the past cost, future projected costs, and unit cost “per click” or “per transaction”, as your case warrants. The challenge here is in the model itself - statistical methods are not foolproof, and the larger the sample (in this case I recommend the entire population, not a smaller sample) is key. References and Tools Articles: http://blogs.msdn.com/b/patrick_butler_monterde/archive/2010/02/10/windows-azure-billing-overview.aspx http://technet.microsoft.com/en-us/magazine/gg213848.aspx http://blog.codingoutloud.com/2011/06/05/azure-faq-how-much-will-it-cost-me-to-run-my-application-on-windows-azure/ http://blogs.msdn.com/b/johnalioto/archive/2010/08/25/10054193.aspx http://geekswithblogs.net/iupdateable/archive/2010/02/08/qampa-how-can-i-calculate-the-tco-and-roi-when.aspx   Other Tools: http://cloud-assessment.com/ http://communities.quest.com/community/cloud_tools

  Read the article

• Can't deploy rails 4 app on Bluehost with Passenger 4 and nginx

  - by user2205763

  I am at Bluehost (dedicated server) trying to run a rails 4 app. I asked to have my server re-imaged, specifying that I do not want rails, ruby, or passenger install automatically as I wanted to install the latest versions myself using a version manager (Bluehost by default offers rails 2.3, ruby 1.8, and passenger 3, which won't work with my app). I installed ruby 1.9.3p327, rails 4.0.0, and passenger 4.0.5. I can verify this by typing, "ruby -v", "rails -v", and "passenger -v" (also "gem -v"). I made sure to install these not as root, so that I don't get a 403 forbidden error when trying to deploy the app. I installed passenger by typing "gem install passenger", and then installed the nginx passenger module (into "/nginx") with "passenger-install-nginx-module". I am trying to run my rails app on a subdomain, http://development.thegraduate.hk (I am using the subdomain to show my client progress on the website). In bluehost I created that subdomain, and had it point to "public_html/thegraduate". I then created a symlink from "rails_apps/thegraduate/public" to "public_html/thegraduate" and verified that the symlink exists. The problem is: when I go to http://development.thegraduate.hk, I get a directory listing. There is nothing resembling a rails app. I have not added a .htaccess file to /rails_apps/thegraduate/public, as that was never specified in the installation of passenger. It was meant to be 'install and go'. When I type "passenger-memory-status", I get 3 things: - Apache processes (7) - Nginx processes (0) - Passenger processes (0) So it appears that nginx and passenger are not running, and I can't figure out how to get it to run (I'm not looking to have it run as a standalone server). Here is my nginx.conf file (/nginx/conf/nginx.conf): #user nobody; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #pid logs/nginx.pid; events { worker_connections 1024; } http { passenger_root /home/thegrad4/.rbenv/versions/1.9.3-p327/lib/ruby/gems/1.9.1/gems/passenger-4.0.5; passenger_ruby /home/thegrad4/.rbenv/versions/1.9.3-p327/bin/ruby; include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name development.thegraduate.hk; root ~/rails_apps/thegraduate/public; passenger_enabled on; #charset koi8-r; #access_log logs/host.access.log main; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } I don't get any errors, just the directory listing. I've tried to be as detailed as possible. Any help on this issue would be greatly appreciated as I've been stumped for the past 3 days. Scouring the web has not helped as my issue seems to be specific to me. Thanks so much. If there are any potential details I forgot to specify, just ask. ** ADDITIONAL INFORMATION ** Going to development.thegraduate.hk/public/ will correctly display the index.html page in /rails_apps/thegraduate/public. However, changing root in the routes.rb file to "root = 'home#index'" does nothing.

  Read the article

• Can't launch Oneiric x64 instance on Eucalyptus

  - by Bruno Reis

  EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. More details in the end. I didn't manage to fix it, and I will file a bug. EDIT 2: I managed to fix it, it apparently works. I have a 4-machine cluster running Ubuntu Server Natty (11.04) x64. I've installed "Ubuntu Enterprise Cloud" from the installtion CD (then updated it) on each of these machines. The cloud seems to work fine, I have lots of virtual machines running Natty servers on them. Now I'd like to run Oneiric in a virtual machine, but somehow I can't. I downloaded Oneiric's (x64) image from http://cloud-images.ubuntu.com/oneiric/current/, published it (uec-publish-tarball oneiric-server-cloudimg-amd64.tar.gz oneiric-server-cloudimg-amd64) exactly as I did with Natty, then tried to launch an instance (euca-run-instances -n 1 -k my-key -t m1.small -z my-cloud emi-XXXXXXXX) using Oneiric's image, but the instance is not able to boot. With euca-get-console-output I get the following: [ 0.461269] VFS: Cannot open root device "sda1" or unknown-block(0,0) [ 0.462388] Please append a correct "root=" boot option; here are the available partitions: [ 0.463855] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.465331] Pid: 1, comm: swapper Not tainted 3.0.0-13-generic #22-Ubuntu [ 0.466526] Call Trace: [ 0.466989] [<ffffffff815d3ee5>] panic+0x91/0x194 [ 0.467860] [<ffffffff81ad1031>] mount_block_root+0xdc/0x18e [ 0.468891] [<ffffffff81ad126a>] mount_root+0x54/0x59 [ 0.469829] [<ffffffff81ad13dc>] prepare_namespace+0x16d/0x1a7 [ 0.470883] [<ffffffff81ad0d76>] kernel_init+0x140/0x145 [ 0.471837] [<ffffffff815f38e4>] kernel_thread_helper+0x4/0x10 [ 0.472889] [<ffffffff81ad0c36>] ? start_kernel+0x3df/0x3df [ 0.473884] [<ffffffff815f38e0>] ? gs_change+0x13/0x13 The filesystem is labeled "cloudimg-rootfs", inside the image both /etc/fstab and /boot/grub/grub.cfg always refer to the image by the label, everything seems to be correct, yet the kernel says it can't find the root file system. I've spent many hours googling, but nothing came out. I've asked on #ubuntu-server, but nobody knew what to do. I've asked on #eucalyptus but got no answer at all. Any ideas on why this is happening and how to solve it? Thanks EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. The first problem is that the Kernel in the image is a -generic kernel, while I suppose it should be a -virtual one. I chrooted into the image, removed the -generic packages, replaced it with the -virtual ones. Then I extracted the new kernel (and replaced the original one (-generic) that came with the tarball) because I need it when I publish and launch an image with Eucalyptus. The problem described above was solved. But then, the console started showing this: mount: mount point ext4 does not exist If you check the /etc/fstab file in the image, it says: LABEL=cloudimg-rootfs ext4 defaults 0 1 Damnt, where's my mount point? Note that it is missing /proc as well. Well, when you think it is over, you will notice that your instance will have no network connectivity. Let's check /etc/network/interface: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback Oh my! It is missing eth0... here I stopped. I can't take no more. I give up. Looks like Canonical has just forgotten to properly set up this image. At first, I though: "have I downloaded a server image by mistake?", but no, I double checked. It is really the cloud image, it has even "cloud-init" installed (which is not, by default, on server images). They just forgot to prepare it. I will file a bug (and reference it here once this is done), and hope they fix it soon! EDIT 2: it looks like the network configuration was the last thing missing. I decided to test it with the fixes above, and it booted properly! However, I haven't got the slightest idea if the image is now good to go...

  Read the article

• The Return Of __FILE__ And __LINE__ In .NET 4.5

  - by Alois Kraus

  Good things are hard to kill. One of the most useful predefined compiler macros in C/C++ were __FILE__ and __LINE__ which do expand to the compilation units file name and line number where this value is encountered by the compiler. After 4.5 versions of .NET we are on par with C/C++ again. It is of course not a simple compiler expandable macro it is an attribute but it does serve exactly the same purpose. Now we do get CallerLineNumberAttribute  == __LINE__ CallerFilePathAttribute        == __FILE__ CallerMemberNameAttribute  == __FUNCTION__ (MSVC Extension)   The most important one is CallerMemberNameAttribute which is very useful to implement the INotifyPropertyChanged interface without the need to hard code the name of the property anymore. Now you can simply decorate your change method with the new CallerMemberName attribute and you get the property name as string directly inserted by the C# compiler at compile time.   public string UserName { get { return _userName; } set { _userName=value; RaisePropertyChanged(); // no more RaisePropertyChanged(“UserName”)! } } protected void RaisePropertyChanged([CallerMemberName] string member = "") { var copy = PropertyChanged; if(copy != null) { copy(new PropertyChangedEventArgs(this, member)); } } Nice and handy. This was obviously the prime reason to implement this feature in the C# 5.0 compiler. You can repurpose this feature for tracing to get your hands on the method name of your caller along other stuff very fast now. All infos are added during compile time which is much faster than other approaches like walking the stack. The example on MSDN shows the usage of this attribute with an example public static void TraceMessage(string message, [CallerMemberName] string memberName = "", [CallerFilePath] string sourceFilePath = "", [CallerLineNumber] int sourceLineNumber = 0) { Console.WriteLine("Hi {0} {1} {2}({3})", message, memberName, sourceFilePath, sourceLineNumber); }   When I do think of tracing I do usually want to have a API which allows me to Trace method enter and leave Trace messages with a severity like Info, Warning, Error When I do print a trace message it is very useful to print out method and type name as well. So your API must either be able to pass the method and type name as strings or extract it automatically via walking back one Stackframe and fetch the infos from there. The first glaring deficiency is that there is no CallerTypeAttribute yet because the C# compiler team was not satisfied with its performance.   A usable Trace Api might therefore look like   enum TraceTypes { None = 0, EnterLeave = 1 << 0, Info = 1 << 1, Warn = 1 << 2, Error = 1 << 3 } class Tracer : IDisposable { string Type; string Method; public Tracer(string type, string method) { Type = type; Method = method; if (IsEnabled(TraceTypes.EnterLeave,Type, Method)) { } } private bool IsEnabled(TraceTypes traceTypes, string Type, string Method) { // Do checking here if tracing is enabled return false; } public void Info(string fmt, params object[] args) { } public void Warn(string fmt, params object[] args) { } public void Error(string fmt, params object[] args) { } public static void Info(string type, string method, string fmt, params object[] args) { } public static void Warn(string type, string method, string fmt, params object[] args) { } public static void Error(string type, string method, string fmt, params object[] args) { } public void Dispose() { // trace method leave } } This minimal trace API is very fast but hard to maintain since you need to pass in the type and method name as hard coded strings which can change from time to time. But now we have at least CallerMemberName to rid of the explicit method parameter right? Not really. Since any acceptable usable trace Api should have a method signature like Tracexxx(… string fmt, params [] object args) we not able to add additional optional parameters after the args array. If we would put it before the format string we would need to make it optional as well which would mean the compiler would need to figure out what our trace message and arguments are (not likely) or we would need to specify everything explicitly just like before . There are ways around this by providing a myriad of overloads which in the end are routed to the very same method but that is ugly. I am not sure if nobody inside MS agrees that the above API is reasonable to have or (more likely) that the whole talk about you can use this feature for diagnostic purposes was not a core feature at all but a simple byproduct of making the life of INotifyPropertyChanged implementers easier. A way around this would be to allow for variable argument arrays after the params keyword another set of optional arguments which are always filled by the compiler but I do not know if this is an easy one. The thing I am missing much more is the not provided CallerType attribute. But not in the way you would think of. In the API above I did add some filtering based on method and type to stay as fast as possible for types where tracing is not enabled at all. It should be no more expensive than an additional method call and a bool variable check if tracing for this type is enabled at all. The data is tightly bound to the calling type and method and should therefore become part of the static type instance. Since extending the CLR type system for tracing is not something I do expect to happen I have come up with an alternative approach which allows me basically to attach run time data to any existing type object in super fast way. The key to success is the usage of generics.   class Tracer<T> : IDisposable { string Method; public Tracer(string method) { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public void Dispose() { if (TraceData<T>.Instance.Enabled.HasFlag(TraceTypes.EnterLeave)) { } } public static void Info(string fmt, params object[] args) { } /// <summary> /// Every type gets its own instance with a fresh set of variables to describe the /// current filter status. /// </summary> /// <typeparam name="T"></typeparam> internal class TraceData<UsingType> { internal static TraceData<UsingType> Instance = new TraceData<UsingType>(); public bool IsInitialized = false; // flag if we need to reinit the trace data in case of reconfigured trace settings at runtime public TraceTypes Enabled = TraceTypes.None; // Enabled trace levels for this type } } We do not need to pass the type as string or Type object to the trace Api. Instead we define a generic Api that accepts the using type as generic parameter. Then we can create a TraceData static instance which is due to the nature of generics a fresh instance for every new type parameter. My tests on my home machine have shown that this approach is as fast as a simple bool flag check. If you have an application with many types using tracing you do not want to bring the app down by simply enabling tracing for one special rarely used type. The trace filter performance for the types which are not enabled must be therefore the fasted code path. This approach has the nice side effect that if you store the TraceData instances in one global list you can reconfigure tracing at runtime safely by simply setting the IsInitialized flag to false. A similar effect can be achieved with a global static Dictionary<Type,TraceData> object but big hash tables have random memory access semantics which is bad for cache locality and you always need to pay for the lookup which involves hash code generation, equality check and an indexed array access. The generic version is wicked fast and allows you to add more features to your tracing Api with minimal perf overhead. But it is cumbersome to write the generic type argument always explicitly and worse if you do refactor code and move parts of it to other classes it might be that you cannot configure tracing correctly. I would like therefore to decorate my type with an attribute [CallerType] class Tracer<T> : IDisposable to tell the compiler to fill in the generic type argument automatically. class Program { static void Main(string[] args) { using (var t = new Tracer()) // equivalent to new Tracer<Program>() { That would be really useful and super fast since you do not need to pass any type object around but you do have full type infos at hand. This change would be breaking if another non generic type exists in the same namespace where now the generic counterpart would be preferred. But this is an acceptable risk in my opinion since you can today already get conflicts if two generic types of the same name are defined in different namespaces. This would be only a variation of this issue. When you do think about this further you can add more features like to trace the exception in your Dispose method if the method is left with an exception with that little trick I did write some time ago. You can think of tracing as a super fast and configurable switch to write data to an output destination or to execute alternative actions. With such an infrastructure you can e.g. Reconfigure tracing at run time. Take a memory dump when a specific method is left with a specific exception. Throw an exception when a specific trace statement is hit (useful for testing error conditions). Execute a passed delegate which e.g. dumps additional state when enabled. Write data to an in memory ring buffer and dump it when specific events do occur (e.g. method is left with an exception, triggered from outside). Write data to an output device. …. This stuff is really useful to have when your code is in production on a mission critical server and you need to find the root cause of sporadic crashes of your application. It could be a buggy graphics card driver which throws access violations into your application (ok with .NET 4 not anymore except if you enable a compatibility flag) where you would like to have a minidump or you have reached after two weeks of operation a state where you need a full memory dump at a specific point in time in the middle of an transaction. At my older machine I do get with this super fast approach 50 million traces/s when tracing is disabled. When I do know that tracing is enabled for this type I can walk the stack by using StackFrameHelper.GetStackFramesInternal to check further if a specific action or output device is configured for this method which is about 2-3 times faster than the regular StackTrace class. Even with one String.Format I am down to 3 million traces/s so performance is not so important anymore since I do want to do something now. The CallerMemberName feature of the C# 5 compiler is nice but I would have preferred to get direct access to the MethodHandle and not to the stringified version of it. But I really would like to see a CallerType attribute implemented to fill in the generic type argument of the call site to augment the static CLR type data with run time data.

  Read the article

• PASS: Election Changes for 2011

  - by Bill Graziano

  Last year after the election, the PASS Board created an Election Review Committee.  This group was charged with reviewing our election procedures and making suggestions to improve the process.  You can read about the formation of the group and review some of the intermediate work on the site – especially in the forums. I was one of the members of the group along with Joe Webb (Chair), Lori Edwards, Brian Kelley, Wendy Pastrick, Andy Warren and Allen White.  This group worked from October to April on our election process.  Along the way we: Interviewed interested parties including former NomCom members, Board candidates and anyone else that came forward. Held a session at the Summit to allow interested parties to discuss the issues Had numerous conference calls and worked through the various topics I can’t thank these people enough for the work they did.  They invested a tremendous number of hours thinking, talking and writing about our elections.  I’m proud to say I was a member of this group and thoroughly enjoyed working with everyone (even if I did finally get tired of all the calls.) The ERC delivered their recommendations to the PASS Board prior to our May Board meeting.  We reviewed those and made a few modifications.  I took their recommendations and rewrote them as procedures while incorporating those changes.  Their original recommendations as well as our final document are posted at the ERC documents page.  Please take a second and read them BEFORE we start the elections.  If you have any questions please post them in the forums on the ERC site. (My final document includes a change log at the end that I decided to leave in.  If you want to know which areas to pay special attention to that’s a good start.) Many of those recommendations were already posted in the forums or in the blogs of individual ERC members.  Hopefully nothing in the ERC document is too surprising. In this post I’m going to walk through some of the key changes and talk about what I remember from both ERC and Board discussions.  I’ll pay a little extra attention to things the Board changed from the ERC.  I’d also encourage any of the Board or ERC members to blog their thoughts on this. The Nominating Committee will continue to exist.  Personally, I was curious to see what the non-Board ERC members would think about the NomCom.  There was broad agreement that a group to vet candidates had value to the organization. The NomCom will be composed of five members.  Two will be Board members and three will be from the membership at large.  The only requirement for the three community members is that you’ve volunteered in some way (and volunteering is defined very broadly).  We expect potential at-large NomCom members to participate in a forum on the PASS site to answer questions from the other PASS members. We’re going to hold an election to determine the three community members.  It will be closer to voting for Summit sessions than voting for Board members.  That means there won’t be multiple dedicated emails.  If you’re at all paying attention it will be easy to participate.  Personally I wanted it easy for those that cared to participate but not overwhelm those that didn’t care.  I think this strikes a good balance. There’s also a clause that in order to be considered a winner in this NomCom election, you must receive 10 votes.  This is something I suggested.  I have no idea how popular the NomCom election is going to be.  I just wanted a fallback that if no one participated and some random person got in with one or two votes.  Any open slots will be filled by the NomCom chair (usually the PASS Immediate Past President).  My assumption is that they would probably take the next highest vote getters unless they were throwing flames in the forums or clearly unqualified.  As a final check, the Board still approves the final NomCom. The NomCom is going to rank candidates instead of rating them.  This has interesting implications.  This was championed by another ERC member and I’m hoping they write something about it.  This will really force the NomCom to make decisions between candidates.  You can’t just rate everyone a 3 and be done with it.  It may also make candidates appear further apart than they actually are.  I’m looking forward talking with the NomCom after this election and getting their feedback on this. The PASS Board added an option to remove a candidate with a unanimous vote of the NomCom.  This was primarily put in place to handle people that lied on their application or had a criminal background or some other unusual situation and we figured it out. We list an explicit goal of three candidate per open slot. We also wanted an easy way to find the NomCom candidate rankings from the ballot.  Hopefully this will satisfy those that want a broad candidate pool and those that want the NomCom to identify the most qualified candidates. The primary spokesperson for the NomCom is the committee chair.  After the issues around the election last year we didn’t have a good communication plan in place.  We should have and that was a failure on the part of the Board.  If there is criticism of the election this year I hope that falls squarely on the Board.  The community members of the NomCom shouldn’t be fielding complaints over the election process.  That said, the NomCom is ranking candidates and we are forcing them to rank some lower than others.  I’m sure you’ll each find someone that you think should have been ranked differently.  I also want to highlight one other change to the process that we started last year and isn’t included in these documents.  I think the candidate forums on the PASS site were tremendously helpful last year in helping people to find out more about candidates.  That gives our members a way to ask hard questions of the candidates and publicly see their answers. This year we have two important groups to fill.  The first is the NomCom.  We need three people from our membership to step up and fill this role.  It won’t be easy.  You will have to make subjective rankings of your fellow community members.  Your actions will be important in deciding who the future leaders of PASS will be.  There’s a 50/50 chance that one of the people you interview will be the President of PASS someday.  This is not a responsibility to be taken lightly. The second is the slate of candidates.  If you’ve ever thought about running for the Board this is the year.  We’ve never had nine candidates on the ballot before.  Your chance of making it through the NomCom are higher than in any previous year.  Unfortunately the more of you that run, the more of you that will lose in the election.  And hopefully that competition will mean more community involvement and better Board members for PASS. Is this the end of changes to the election process?  It isn’t.  Every year that I’ve been on the Board the election process has changed.  Some years there have been small changes and some years there have been large changes.  After this election we’ll look at how the process worked and decide what steps to take – just like we do every year.

  Read the article

• CodePlex Daily Summary for Tuesday, September 11, 2012

  CodePlex Daily Summary for Tuesday, September 11, 2012Popular ReleasesMetodología General Ajustada - MGA: 03.01.04: Cambios Parmenio: Envio actualizaciones al formato PRO_F02, costos y fuentes. Se debe ejecutar el script en la base de datos. Soluciona problema que al tener varias alternativas, traiga en el formulario PR-02 los costos de la otra alternativa. Cambios John: Integración de código con cambios enviados por Parmenio Bonilla. Generación de instaladores. Soporte técnico por correo electrónico y telefónico. Restauración y recuperación de dos proycetos de Bakcup de Base de Datos de Chocó.Arduino for Visual Studio: Arduino 1.x for Visual Studio 2012, 2010 and 2008: Register for the visualmicro.com forum for more news and updates Version 1209.10 includes support for VS2012 and minor fixes for the Arduino debugger beta test team. Version 1208.19 is considered stable for visual studio 2010 and 2008. If you are upgrading from an older release of Visual Micro and encounter a problem then uninstall "Visual Micro for Arduino" using "Control Panel>Add and Remove Programs" and then run the install again. Key Features of 1209.10 Support for Visual Studio 2...Microsoft Script Explorer for Windows PowerShell: Script Explorer Reference Implementation(s): This download contains Source Code and Documentation for Script Explorer DB Reference Implementation. You can create your own provider and use it in Script Explorer. Refer to the documentation for more information. The source code is provided "as is" without any warranty. Read the Readme.txt file in the SourceCode.Social Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 style Skin for DotNetNuke 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...Mishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter New feature - Set a property's DefaultValueHandling to Ignore when EmitDefaultValue from DataMemberAttribute is false Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing deci...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.2: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...WordMat: WordMat v. 1.02: This version was used for the 2012 exam.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...New Projects&*^&hjkdhasdas;!231231+_)_(asldjhdasjkdhasjkd!#$: aaaaaasdsadsbob.js: bob.js is a JavaScript framework which will help you design better JavaScript objects, and to write better JavaScript code in general.CS559: CS559 - Graphics project at UW MadisonEjemplodeProyectosII: El sisguiente es un ejemplo de pruebasHow to apply MVC to mobile project: I am setting up simple ASP NET MVC test project in order to demonstrate how to create cross-platform webdelivery backend with ASP.NET IntelsiWEB: Proyecto Intelsi WEBjass: xcxczzzzccxzcxcxzcxzcxMajo Proyecto de Prueba: Este proyecto es un proyectoManaged silverlight roaches: Just roaches for silverlight. nothing moreMetro Jalali Calendar: The Jalali Calendar for Windows 8 Metro User Interface. "Jalali Calendar" aka "Shamsi Calendar" aka "Iranian Calendar"MyBackupTool: Basic c# .net 4.0 library to help copy files / folders, very simple to use.NCT Inventory System: This is a sample Inventory System ProjectNDEF Library for Proximity APIs (NFC): Easily parse and create NDEF records with C# and the Windows Proximity APIs (NFC).OAMaster: Help company to manage their information of staff.Open School Management System: Open School Management System is an open source initiative that I am undertaking to contribute to the society that we live in.Oscilloscope Frequency Calculator: Oscilloscope Frequency Calculator Gives you the frequency when you have a analogue oscilloscopePCControl: testPersonal Expenses: A simple web application to track personal expenses.PMOM: project management tool on SharePointpostback tutorial: This is a tutorial project.ProjectJabbr910: pappaProyecto: Primer proyectoProyecto Cachanga: Demo proyectos 2Proyecto de Prueba: Demo proyecto 2Proyecto Integrador 2: CURSO : PROYECTO INTEGRADOR 2 DEMOProyecto Integrador Para Soluciones Empresariales: Demo Proyecto 2Proyecto Integrador Soluciones Empresariales II - 2012-2: Demo proyectos 2Proyecto Prueba: practica codeplexRaquelAzureProject: Test projectSILAS: Sistema de Información Local de Agua Y Saneamiento: Sistema de Información Local para el Área de Medio Ambiente y Recursos Naturales de la Municipalidad Provincial de CajamarcaSilasPro: Proyecto de proyecto integradorSistem LPK Pemkot Semarang versi x86: Sistem Laporan Pelaksanaan Kegiatan SKPD Kota Semarang khusus untuk komputer Windows 64 bitSSIS Compressed File Source and Destination Components: Compressed File Source and Destination Components for SSIS 2012.testscenairo7: kudutestTorrentTrafficInspector: IT Solution Georgia TowerDef: Ð? tài opensource c?a group môn CNPMUdpBBS: BBS that uses UDP messages for communication to allow small, simple clients to use IP connections to interact with the BBS.WPFYard: my wpf yardWPUtils: WPUtils provides out-of-box attached properties/behaviors to extent existing controls/components.XiSD: A simple XSD to C# code generation tool with support for included XSD files and data contract attributes.xxxxf32: xxx

  Read the article

• CodePlex Daily Summary for Monday, December 03, 2012

  CodePlex Daily Summary for Monday, December 03, 2012Popular Releasesmenu4web: menu4web 1.1 - free javascript menu: menu4web 1.1 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 22 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Quest: Quest 5.3 Beta: New features in Quest 5.3 include: Grid-based map (sponsored by Phillip Zolla) Changable POV (sponsored by Phillip Zolla) Game log (sponsored by Phillip Zolla) Customisable object link colour (sponsored by Phillip Zolla) More room description options (by James Gregory) More mathematical functions now available to expressions Desktop Player uses the same UI as WebPlayer - this will make it much easier to implement customisation options New sorting functions: ObjectListSort(list,...Mi-DevEnv: Development 0.1: First Drop This is the first drop of files now placed under source control. Today the system ran end to end, creating a virtual machine and installing multiple products without a single prompt or key press being required. This is a snapshot of the first release. All files are under source control. Assumes Hyper-V under Server 2012 or Windows 8, using Windows Management Framework with PowerShell 3.Chinook Database: Chinook Database 1.4: Chinook Database 1.4 This is a sample database available in multiple formats: SQL scripts for multiple database vendors, embeded database files, and XML format. The Chinook data model is available here. ChinookDatabase1.4_CompleteVersion.zip is a complete package for all supported databases/data sources. There are also packages for each specific data source. Supported Database ServersDB2 EffiProz MySQL Oracle PostgreSQL SQL Server SQL Server Compact SQLite Issues Resolved293...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.34: changes FIXED: Thanks Function when "Download each post in it's own folder" is disabled FIXED: "PixHub.eu" linksCleverBobCat: CleverBobCat 1.1.2: Changes: - Control loss of cart when decoupled fixed - Some problems with energy transfer usage if disabled system fixedD3 Loot Tracker: 1.5.6: Updated to work with D3 version 1.0.6.13300DirectQ: DirectQ II 2012-11-29: A (slightly) modernized port of Quake II to D3D9. You need SM3 or better hardware to run this - if you don't have it, then don't even bother. It should work on Windows Vista, 7 or 8; it may also work on XP but I haven't tested. Known bugs include: Some mods may not work. This is unfortunately due to the nature of Quake II's game DLLs; sometimes a recompile of the game DLL is all that's needed. In any event, ensure that the game DLL is compatible with the last release of Quake II first (...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.2: new UI for the Administration console Bugs fixes and improvement version 2.2.215.3JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.5: What's new in JayData 1.2.5For detailed release notes check the release notes. Handlebars template engine supportImplement data manager applications with JayData using Handlebars.js for templating. Include JayDataModules/handlebars.js and begin typing the mustaches :) Blogpost: Handlebars templates in JayData Handlebars helpers and model driven commanding in JayData Easy JayStorm cloud data managementManage cloud data using the same syntax and data management concept just like any other data ...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.70: Highlight features & improvements: • Performance optimization. • Search engine optimization. ID-less URLs for products, categories, and manufacturers. • Added ACL support (access control list) on products and categories. • Minify and bundle JavaScript files. • Allow a store owner to decide which billing/shipping address fields are enabled/disabled/required (like it's already done for the registration page). • Moved to MVC 4 (.NET 4.5 is required). • Now Visual Studio 2012 is required to work ...SQL Server Partition Management: Partition Management Release 3.0: Release 3.0 adds support for SQL Server 2012 and is backward compatible with SQL Server 2008 and 2005. The release consists of: • A Readme file • The Executable • The source code (Visual Studio project) Enhancements include: -- Support for Columnstore indexes in SQL Server 2012 -- Ability to create TSQL scripts for staging table and index creation operations -- Full support for global date and time formats, locale independent -- Support for binary partitioning column types -- Fixes to is...NHook - A debugger API: NHook 1.0: x86 debugger Resolve symbol from MS Public server Resolve RVA from executable's image Add breakpoints Assemble / Disassemble target process assembly More information here, you can also check unit tests that are real sample code.PDF Library: PDFLib v2.0: Release notes This new version include many bug fixes and include support for stream objects and cross-reference object streams. New FeatureExtract images from the PDFDocument.Editor: 2013.5: Whats new for Document.Editor 2013.5: New Read-only File support New Check For Updates support Minor Bug Fix's, improvements and speed upsMCEBuddy 2.x: MCEBuddy 2.3.10: Critical Update to 2.3.9: Changelog for 2.3.10 (32bit and 64bit) 1. AsfBin executable missing from build 2. Removed extra references from build to avoid conflict 3. Showanalyzer installation now checked on remote engine machine Changelog for 2.3.9 (32bit and 64bit) 1. Added support for WTV output profile 2. Added support for minimizing MCEBuddy to the system tray 3. Added support for custom archive folder 4. Added support to disable subdirectory monitoring 5. Added support for better TS fil...DotNetNuke® Community Edition CMS: 07.00.00: Major Highlights Fixed issue that caused profiles of deleted users to be available Removed the postback after checkboxes are selected in Page Settings > Taxonomy Implemented the functionality required to edit security role names and social group names Fixed JavaScript error when using a ";" semicolon as a profile property Fixed issue when using DateTime properties in profiles Fixed viewstate error when using Facebook authentication in conjunction with "require valid profile fo...CODE Framework: 4.0.21128.0: See change notes in the documentation section for details on what's new.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.76: Fixed a typo in ObjectLiteralProperty.IsConstant that caused all object literals to be treated like they were constants, and possibly moved around in the code when they shouldn't be.Kooboo CMS: Kooboo CMS 3.3.0: New features: Dropdown/Radio/Checkbox Lists no longer references the userkey. Instead they refer to the UUID field for input value. You can now delete, export, import content from database in the site settings. Labels can now be imported and exported. You can now set the required password strength and maximum number of incorrect login attempts. Child sites can inherit plugins from its parent sites. The view parameter can be changed through the page_context.current value. Addition of c...New ProjectsASP.NET Youtube Clone: ASP.NET Youtube Clone is a complete script with basic and advance features which allow you to build complex social media sharing website in asp.net, c#, vb.net.Assembly - Halo Research Tool: Assembly is a program designed to aid in the development of creative modifications for the Xbox 360 Halo games. It also includes a .NET library for programmers.Async ContentPlaceHolder: Load your ASP.Net content placeholder asynchronously.Automate Microsoft System Center Configuration Manager 2012 with Powershell: Scripts to automate Microsoft System Center 2012 Configuration Manager with PowershellAzMan Contrib: AzMan Contrib aims to provide a better experience when using AzMan with ASP.NET WebForms and ASP.NET MVC.Badhshala Jackpot: Facebook application that features Slotmachine with 3 slots where each slot's position is predicted randomly. Tools Used: ASP.Net MVC 4, SQL Server, csharpsdk BREIN Messaging Infrastructure: This project allows for hiding & encapsulating an (WS based) infrastructure by providing the means for dynamic message routing. The gateway thereby enhances the messaging channels to enforce any amount of policies upon in- and outcoming messages. CricketWorldCup2011Trivia: Simple trivia game written in C# based on the 2011 Cricket World Cup.Flee#: A C# Port of the Flee evaluator. It's an expression evaluator for C# that compiles the expressions into IL code, resulting in very fast and efficient execution.Hamcast for multi station coordination: Amateur Radio multiple station operation tends to have loggers and operators striving to get particular information from each other, like what IP address and so forth, so I write this small multicast utility to help them. Supports N1MM and other popular loggers.LDAP/AD Claim Provider For SharePoint 2010: This claim provider implements search on LDAP and AD for SAML authentication (claims mode) in SharePoint 2010MicroData Parser: This library is preliminary implementation of the HTML5 MicroData specification, in C#.PCC.Framework: NET???????????ResumeSharp: ResumeSharp is a resume building tool designed to help keep your resume up-to-date easily. Additionally, you can quickly generate targeted resumes on the fly. It's developed in C#.Sharepoint SPConstant generator: This utility creates a hierarchally representation of a WSS 3.0 / MOSS 2007 Site Collection and generates a C# Source Code File (SPConstant.cs) with a nested structure of structs with static const string fields. This enables you to do the following: SPList list = web.Lists[SPConstant.Lists.Tasklist.Name]; You will then just have to regenerate the SPConstant file (eg. from within VS 2005 or from Command line) to update the name. Description is added to the XML-comments in the generated file ...SoftServe Tasks: a couple of tasks from the 'softserve' courses.Solid Edge Community Extensions: Solid Edge SDKStar Fox XNA Edition: Development of videogames for Microsoft platforms using XNA Game Studio. Remake of the classic videogame Star Fox (1993) for SNES game console.TinySimpleCMS: a tiny and simple cmsUgly Animals: Crossing of Angry Birds and Yeti SportsVIENNA Advantage ERP and CRM: A real cloud based ERP and CRM in C#.Net offering enterprise level functionality for PC, Mac, iPhone, Surface and Android with HTML5 and Silverlight UI.WebSitemap Localizer: WebSitemap Localizer is a utility to auto-convert your Web.sitemap file to support localization.

  Read the article

• Day 3 - XNA: Hacking around with images

  - by dapostolov

  Yay! Today I'm going to get into some code! My mind has been on this all day! I find it amusing how I practice, daily, to be "in the moment" or "present" and the excitement and anticipation of this project seems to snatch it away from me frequently. WELL!!! (Shakes Excitedly) Let's do this =)! Let's code! For these next few days it is my intention to better understand image rendering using XNA; after said prototypes are complete I should (fingers crossed) be able to dive into my game code using the design document I hammered out the other night. On a personal note, I think the toughest thing right now is finding the time to do this project. Each night, after my little ones go to bed I can only really afford a couple hours of work on this project. However, I hope to utilise this time as best as I can because this is the first time in a while I've found a project that I've been passionate about. A friend recently asked me if I intend to go 3D or extend the game design. Yes. For now I'm keeping it simple. Lastly, just as a note, as I was doing some further research into image rendering this morning I came across some other XNA content and lessons learned. I believe this content could have probably been posted in the first couple of posts, however, I will share the new content as I learn it at the end of each day. Maybe I'll take some time later to fix the posts but for now Installation and Deployment - Lessons Learned I had installed the XNA studio  (Day 1) and the site instructions were pretty easy to follow. However, I had a small difficulty with my development environment. You see, I run a virtual desktop development environment. Even though I was able to code and compile all the tutorials the game failed to run...because I lacked a 3D capable card; it was not detected on the virtual box... First Lesson: The XNA runtime needs to "see" the 3D card! No sweat, Il copied the files over to my parent box and executed the program. ERROR. Hmm... Second Lesson (which I should have probably known but I let the excitement get the better of me): you need the XNA runtime on the client PC to run the game, oh, and don't forget the .Net Runtime! Sprite, it ain't just a Soft Drink... With these prototypes I intend to understand and perform the following tasks. learn game development terminology how to place and position (rotate) a static image on the screen how to layer static images on the screen understand image scaling can we reuse images? understand how framerate is handled in XNA how to display text , basic shapes, and colors on the screen how to interact with an image (collision of user input?) how to animate an image and understand basic animation techniques how to detect colliding images or screen edges how to manipulate the image, lets say colors, stretching how to focus on a segment of an image...like only displaying a frame on a film reel what's the best way to manage images (compression, storage, location, prevent artwork theft, etc.) Well, let's start with this "prototype" task list for now...Today, let's get an image on the screen and maybe I can mark a few of the tasks as completed... C# Prototype1 New Visual Studio Project Select the XNA Game Studio 3.1 Project Type Select the Windows Game 3.1 Template Type Prototype1 in the Name textbox provided Press OK. At this point code has auto-magically been created. Feel free to press the F5 key to run your first XNA program. You should have a blue screen infront of you. Without getting into the nitty gritty right, the code that was generated basically creates some basic code to clear the window content with the lovely CornFlowerBlue color. Something to notice, when you move your mouse into the window...nothing. ooooo spoooky. Let's put an image on that screen! Step A - Get an Image into the solution Under "Content" in your Solution Explorer, right click and add a new folder and name it "Sprites". Copy a small image in there; I copied a "Royalty Free" wizard hat from a quick google search and named it wizards_hat.jpg (rightfully so!) Step B - Add the sprite and position fields Now, open/edit  Game1.cs Locate the following line:  SpriteBatch spriteBatch; Under this line type the following:         SpriteBatch spriteBatch; // the line you are looking for...         Texture2D sprite;         Vector2 position; Step C - Load the image asset Locate the "Load Content" Method and duplicate the following:             protected override void LoadContent()         {             spriteBatch = new SpriteBatch(GraphicsDevice);             // your image name goes here...             sprite = Content.Load<Texture2D>("Sprites\\wizards_hat");             position = new Vector2(200, 100);             base.LoadContent();         } Step D - Draw the image Locate the "Draw" Method and duplicate the following:        protected override void Draw(GameTime gameTime)         {             GraphicsDevice.Clear(Color.CornflowerBlue);             spriteBatch.Begin(SpriteBlendMode.AlphaBlend);             spriteBatch.Draw(sprite, position, Color.White);             spriteBatch.End();             base.Draw(gameTime);         }  Step E - Compile and Run Engage! (F5) - Debug! Your image should now display on a cornflowerblue window about 200 pixels from the left and 100 pixels from the top. Awesome! =) Pretty cool how we only coded a few lines to display an image, but believe me, there is plenty going on behind the scenes. However, for now, I'm going to call it a night here. Blogging all this progress certainly takes time... However, tomorrow night I'm going to detail what we just did, plus start checking off points on that list! I'm wondering right now if I should add pictures / code to this post...let me know if you want them =) Best Regards, D.

  Read the article

• apache tomcat loadbalancing clustering on ubuntu

  - by user740010

  i am facing a problem in clustering the tomcat with apache as a loadbalancer using mod_jk on ubuntu. i have install apache2 on my ubuntu 11.04 and i have downloaded tomcat7 created two copies and kept them at two different location. 1st one is at /home/net4u/vishal/test/tomcatA 2nd one is at /home/net4u/vishal/test1/tomcatB i have made following changes to server.xml file in /conf folder 1. <Server port="8205" shutdown="SHUTDOWN"> 2. <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> 3.<Connector port="8209" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> 4. <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> similarly i have modified other tomcat i.e tomcatA server.xml content of the server.xml is as follow: -- <!--The connectors can use a shared executor, you can define one or more named thread pools--> <!-- <Executor name="tomcatThreadPool" namePrefix="catalina-exec-" maxThreads="150" minSpareThreads="4"/> --> <!-- A "Connector" represents an endpoint by which requests are received and responses are returned. Documentation at : Java HTTP Connector: /docs/config/http.html (blocking & non-blocking) Java AJP Connector: /docs/config/ajp.html APR (HTTP/AJP) Connector: /docs/apr.html Define a non-SSL HTTP/1.1 Connector on port 8080 --> <Connector port="8280" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> <!-- A "Connector" using the shared thread pool--> <!-- <Connector executor="tomcatThreadPool" port="8080" protocol="HTTP/1.1" connectionTimeout="20000" redirectPort="8443" /> --> <!-- Define a SSL HTTP/1.1 Connector on port 8443 This connector uses the JSSE configuration, when using APR, the connector should be using the OpenSSL style configuration described in the APR documentation --> <!-- <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" /> --> <!-- Define an AJP 1.3 Connector on port 8009 --> <Connector port="8109" protocol="AJP/1.3" redirectPort="8443" /> <!-- An Engine represents the entry point (within Catalina) that processes every request. The Engine implementation for Tomcat stand alone analyzes the HTTP headers included with the request, and passes them on to the appropriate Host (virtual host). Documentation at /docs/config/engine.html --> <!-- You should set jvmRoute to support load-balancing via AJP ie : <Engine name="Catalina" defaultHost="localhost" jvmRoute="jvm1"> --> <Engine name="Catalina" defaultHost="localhost" jvmRoute="tomcatB"> <!--For clustering, please take a look at documentation at: /docs/cluster-howto.html (simple how to) /docs/config/cluster.html (reference documentation) --> <!-- uncomment for clustering--> <Cluster className="org.apache.catalina.ha.tcp.SimpleTcpCluster"/> <!-- Use the LockOutRealm to prevent attempts to guess user passwords via a brute-force attack --> <Realm className="org.apache.catalina.realm.LockOutRealm"> <!-- This Realm uses the UserDatabase configured in the global JNDI resources under the key "UserDatabase". Any edits that are performed against this UserDatabase are immediately available for use by the Realm. --> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> </Realm> <Host name="localhost" appBase="webapps" unpackWARs="true" autoDeploy="true"> <!-- SingleSignOn valve, share authentication between web applications Documentation at: /docs/config/valve.html --> <!-- <Valve className="org.apache.catalina.authenticator.SingleSignOn" /> --> <!-- Access log processes all example. Documentation at: /docs/config/valve.html Note: The pattern used is equivalent to using pattern="common" --> <Valve className="org.apache.catalina.valves.AccessLogValve" directory="logs" prefix="localhost_access_log." suffix=".txt" pattern="%h %l %u %t &quot;%r&quot; %s %b" resolveHosts="false"/> </Host> </Engine> i have install libapache2-mod-jk step 1. i have Created jk.load file in /etc/apache2/mods-enabled/jk.load content is as follows: LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so Create /etc/apache2/mods-enabled/jk.conf: JkWorkersFile /etc/apache2/workers.properties JkLogFile /var/log/apache2/jk.log JkMount /ecommerce/* worker1 JkMount /images/* worker1 JkMount /content/* worker1 step 2. Created workers.properties file in /etc/apache2/workers.properties content is as follows: workers.tomcat_home=/home/vishal/Desktop/test/tomcatA workers.java_home=/usr/lib/jvm/default-java ps=/ worker.list=tomcatA,tomcatB,loadbalancer   worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1   worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB worker.loadbalancer.sticky_session=1 i tried the same thing on the windows machine it is working.

  Read the article

• DRY and SRP

  - by Timothy Klenke

  Originally posted on: http://geekswithblogs.net/TimothyK/archive/2014/06/11/dry-and-srp.aspxKent Beck’s XP Simplicity Rules (aka Four Rules of Simple Design) are a prioritized list of rules that when applied to your code generally yield a great design.  As you’ll see from the above link the list has slightly evolved over time.  I find today they are usually listed as: All Tests Pass Don’t Repeat Yourself (DRY) Express Intent Minimalistic These are prioritized.  If your code doesn’t work (rule 1) then everything else is forfeit.  Go back to rule one and get the code working before worrying about anything else. Over the years the community have debated whether the priority of rules 2 and 3 should be reversed.  Some say a little duplication in the code is OK as long as it helps express intent.  I’ve debated it myself.  This recent post got me thinking about this again, hence this post.   I don’t think it is fair to compare “Expressing Intent” against “DRY”.  This is a comparison of apples to oranges.  “Expressing Intent” is a principal of code quality.  “Repeating Yourself” is a code smell.  A code smell is merely an indicator that there might be something wrong with the code.  It takes further investigation to determine if a violation of an underlying principal of code quality has actually occurred. For example “using nouns for method names”, “using verbs for property names”, or “using Booleans for parameters” are all code smells that indicate that code probably isn’t doing a good job at expressing intent.  They are usually very good indicators.  But what principle is the code smell of Duplication pointing to and how good of an indicator is it? Duplication in the code base is bad for a couple reasons.  If you need to make a change and that needs to be made in a number of locations it is difficult to know if you have caught all of them.  This can lead to bugs if/when one of those locations is overlooked.  By refactoring the code to remove all duplication there will be left with only one place to change, thereby eliminating this problem. With most projects the code becomes the single source of truth for a project.  If a production code base is inconsistent with a five year old requirements or design document the production code that people are currently living with is usually declared as the current reality (or truth).  Requirement or design documents at this age in a project life cycle are usually of little value. Although comparing production code to external documentation is usually straight forward, duplication within the code base muddles this declaration of truth.  When code is duplicated small discrepancies will creep in between the two copies over time.  The question then becomes which copy is correct?  As different factions debate how the software should work, trust in the software and the team behind it erodes. The code smell of Duplication points to a violation of the “Single Source of Truth” principle.  Let me define that as: A stakeholder’s requirement for a software change should never cause more than one class to change. Violation of the Single Source of Truth principle will always result in duplication in the code.  However, the inverse is not always true.  Duplication in the code does not necessarily indicate that there is a violation of the Single Source of Truth principle. To illustrate this, let’s look at a retail system where the system will (1) send a transaction to a bank and (2) print a receipt for the customer.  Although these are two separate features of the system, they are closely related.  The reason for printing the receipt is usually to provide an audit trail back to the bank transaction.  Both features use the same data:  amount charged, account number, transaction date, customer name, retail store name, and etcetera.  Because both features use much of the same data, there is likely to be a lot of duplication between them.  This duplication can be removed by making both features use the same data access layer. Then start coming the divergent requirements.  The receipt stakeholder wants a change so that the account number has the last few digits masked out to protect the customer’s privacy.  That can be solve with a small IF statement whilst still eliminating all duplication in the system.  Then the bank wants to take a picture of the customer as well as capture their signature and/or PIN number for enhanced security.  Then the receipt owner wants to pull data from a completely different system to report the customer’s loyalty program point total. After a while you realize that the two stakeholders have somewhat similar, but ultimately different responsibilities.  They have their own reasons for pulling the data access layer in different directions.  Then it dawns on you, the Single Responsibility Principle: There should never be more than one reason for a class to change. In this example we have two stakeholders giving two separate reasons for the data access class to change.  It is clear violation of the Single Responsibility Principle.  That’s a problem because it can often lead the project owner pitting the two stakeholders against each other in a vein attempt to get them to work out a mutual single source of truth.  But that doesn’t exist.  There are two completely valid truths that the developers need to support.  How is this to be supported and honour the Single Responsibility Principle?  The solution is to duplicate the data access layer and let each stakeholder control their own copy. The Single Source of Truth and Single Responsibility Principles are very closely related.  SST tells you when to remove duplication; SRP tells you when to introduce it.  They may seem to be fighting each other, but really they are not.  The key is to clearly identify the different responsibilities (or sources of truth) over a system.  Sometimes there is a single person with that responsibility, other times there are many.  This can be especially difficult if the same person has dual responsibilities.  They might not even realize they are wearing multiple hats. In my opinion Single Source of Truth should be listed as the second rule of simple design with Express Intent at number three.  Investigation of the DRY code smell should yield to the proper application SST, without violating SRP.  When necessary leave duplication in the system and let the class names express the different people that are responsible for controlling them.  Knowing all the people with responsibilities over a system is the higher priority because you’ll need to know this before you can express it.  Although it may be a code smell when there is duplication in the code, it does not necessarily mean that the coder has chosen to be expressive over DRY or that the code is bad.

  Read the article

• C#/.NET Little Wonders: Skip() and Take()

  - by James Michael Hare

  Once again, in this series of posts I look at the parts of the .NET Framework that may seem trivial, but can help improve your code by making it easier to write and maintain. The index of all my past little wonders posts can be found here. I’ve covered many valuable methods from System.Linq class library before, so you already know it’s packed with extension-method goodness.  Today I’d like to cover two small families I’ve neglected to mention before: Skip() and Take().  While these methods seem so simple, they are an easy way to create sub-sequences for IEnumerable<T>, much the way GetRange() creates sub-lists for List<T>. Skip() and SkipWhile() The Skip() family of methods is used to ignore items in a sequence until either a certain number are passed, or until a certain condition becomes false.  This makes the methods great for starting a sequence at a point possibly other than the first item of the original sequence.   The Skip() family of methods contains the following methods (shown below in extension method syntax): Skip(int count) Ignores the specified number of items and returns a sequence starting at the item after the last skipped item (if any).  SkipWhile(Func<T, bool> predicate) Ignores items as long as the predicate returns true and returns a sequence starting with the first item to invalidate the predicate (if any).  SkipWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item.  For example: 1: var list = new[] { 3.14, 2.72, 42.0, 9.9, 13.0, 101.0 }; 2:  3: // sequence contains { 2.72, 42.0, 9.9, 13.0, 101.0 } 4: var afterSecond = list.Skip(1); 5: Console.WriteLine(string.Join(", ", afterSecond)); 6:  7: // sequence contains { 42.0, 9.9, 13.0, 101.0 } 8: var afterFirstDoubleDigit = list.SkipWhile(v => v < 10.0); 9: Console.WriteLine(string.Join(", ", afterFirstDoubleDigit)); Note that the SkipWhile() stops skipping at the first item that returns false and returns from there to the rest of the sequence, even if further items in that sequence also would satisfy the predicate (otherwise, you’d probably be using Where() instead, of course). If you do use the form of SkipWhile() which also passes an index into the predicate, then you should keep in mind that this is the index of the item in the sequence you are calling SkipWhile() from, not the index in the original collection.  That is, consider the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // Get all items < 10, then 4: var whatAmI = list 5: .Skip(2) 6: .SkipWhile((i, x) => i > x); For this example the result above is 2.4, and not 1.2, 2.2, 2.3, 2.4 as some might expect.  The key is knowing what the index is that’s passed to the predicate in SkipWhile().  In the code above, because Skip(2) skips 1.0 and 1.1, the sequence passed to SkipWhile() begins at 1.2 and thus it considers the “index” of 1.2 to be 0 and not 2.  This same logic applies when using any of the extension methods that have an overload that allows you to pass an index into the delegate, such as SkipWhile(), TakeWhile(), Select(), Where(), etc.  It should also be noted, that it’s fine to Skip() more items than exist in the sequence (an empty sequence is the result), or even to Skip(0) which results in the full sequence.  So why would it ever be useful to return Skip(0) deliberately?  One reason might be to return a List<T> as an immutable sequence.  Consider this class: 1: public class MyClass 2: { 3: private List<int> _myList = new List<int>(); 4:  5: // works on surface, but one can cast back to List<int> and mutate the original... 6: public IEnumerable<int> OneWay 7: { 8: get { return _myList; } 9: } 10:  11: // works, but still has Add() etc which throw at runtime if accidentally called 12: public ReadOnlyCollection<int> AnotherWay 13: { 14: get { return new ReadOnlyCollection<int>(_myList); } 15: } 16:  17: // immutable, can't be cast back to List<int>, doesn't have methods that throw at runtime 18: public IEnumerable<int> YetAnotherWay 19: { 20: get { return _myList.Skip(0); } 21: } 22: } This code snippet shows three (among many) ways to return an internal sequence in varying levels of immutability.  Obviously if you just try to return as IEnumerable<T> without doing anything more, there’s always the danger the caller could cast back to List<T> and mutate your internal structure.  You could also return a ReadOnlyCollection<T>, but this still has the mutating methods, they just throw at runtime when called instead of giving compiler errors.  Finally, you can return the internal list as a sequence using Skip(0) which skips no items and just runs an iterator through the list.  The result is an iterator, which cannot be cast back to List<T>.  Of course, there’s many ways to do this (including just cloning the list, etc.) but the point is it illustrates a potential use of using an explicit Skip(0). Take() and TakeWhile() The Take() and TakeWhile() methods can be though of as somewhat of the inverse of Skip() and SkipWhile().  That is, while Skip() ignores the first X items and returns the rest, Take() returns a sequence of the first X items and ignores the rest.  Since they are somewhat of an inverse of each other, it makes sense that their calling signatures are identical (beyond the method name obviously): Take(int count) Returns a sequence containing up to the specified number of items. Anything after the count is ignored. TakeWhile(Func<T, bool> predicate) Returns a sequence containing items as long as the predicate returns true.  Anything from the point the predicate returns false and beyond is ignored. TakeWhile(Func<T, int, bool> predicate) Same as above, but passes not only the item itself to the predicate, but also the index of the item. So, for example, we could do the following: 1: var list = new[] { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // sequence contains 1.0 and 1.1 4: var firstTwo = list.Take(2); 5:  6: // sequence contains 1.0, 1.1, 1.2 7: var underTwo = list.TakeWhile(i => i < 2.0); The same considerations for SkipWhile() with index apply to TakeWhile() with index, of course.  Using Skip() and Take() for sub-sequences A few weeks back, I talked about The List<T> Range Methods and showed how they could be used to get a sub-list of a List<T>.  This works well if you’re dealing with List<T>, or don’t mind converting to List<T>.  But if you have a simple IEnumerable<T> sequence and want to get a sub-sequence, you can also use Skip() and Take() to much the same effect: 1: var list = new List<double> { 1.0, 1.1, 1.2, 2.2, 2.3, 2.4 }; 2:  3: // results in List<T> containing { 1.2, 2.2, 2.3 } 4: var subList = list.GetRange(2, 3); 5:  6: // results in sequence containing { 1.2, 2.2, 2.3 } 7: var subSequence = list.Skip(2).Take(3); I say “much the same effect” because there are some differences.  First of all GetRange() will throw if the starting index or the count are greater than the number of items in the list, but Skip() and Take() do not.  Also GetRange() is a method off of List<T>, thus it can use direct indexing to get to the items much more efficiently, whereas Skip() and Take() operate on sequences and may actually have to walk through the items they skip to create the resulting sequence.  So each has their pros and cons.  My general rule of thumb is if I’m already working with a List<T> I’ll use GetRange(), but for any plain IEnumerable<T> sequence I’ll tend to prefer Skip() and Take() instead. Summary The Skip() and Take() families of LINQ extension methods are handy for producing sub-sequences from any IEnumerable<T> sequence.  Skip() will ignore the specified number of items and return the rest of the sequence, whereas Take() will return the specified number of items and ignore the rest of the sequence.  Similarly, the SkipWhile() and TakeWhile() methods can be used to skip or take items, respectively, until a given predicate returns false.    Technorati Tags: C#, CSharp, .NET, LINQ, IEnumerable<T>, Skip, Take, SkipWhile, TakeWhile

  Read the article

• How do I get a rt2800usb wireless device working?

  - by Jii

  My brand new desktop running 13.04 has endless problems with wireless. Dozens of others are flooding forums with reports of the same problems. It worked fine for a few days, then there were a few days where it started having problems sometimes and working sometimes. Now it never works at all. I have 5+ devices all able to connect without any trouble at all, including iPhone, Android phone, 3DS, multiple game consoles, a laptop running windows 7, and even a second desktop machine running Ubuntu 12.04 sitting right behind the 13.04 machine. All other devices have full wireless bars displayed (strong signals). At any moment, one of the following is happening, and it changes randomly: Trying to connect forever, but never establishing a connection. Wireless icon constantly animating. Finds no wireless networks at all. (There are 12+ in range according to other devices.) Will not try to connect to the network. If I use the icon to connect, it will display "Disconnected" within a few seconds. Will continuously ask for the network password. Typing it in correctly does not help. Wireless is working fine. This happens sometimes. It can work for days at a time, or only 10 mins at a time. Various things that usually do nothing but sometimes fix the problem: Reboot. This has the best chance of helping, but it usually takes 5+ times. Disable/re-enable Wi-Fi using the wireless icon. Disable/re-enable Networking using the wireless icon. Use the icon to try and connect to a network (if found). Use the icon to open Edit Connections and delete my connection info, causing it to be recreated (once it's actually found again). Various things that seem to make no difference: Changing between using Linux headers in grub at bootup, between 3.10.0, 3.9.0, or 3.8.0. Move the wireless router very close to the desktop. Running sudo rfkill unblock all (I dunno what this is supposed to do.) I've used Ubuntu for 6 years and I've never had a problem with networking. Now I'm spending all my time reading through endless problem reports and trying all the answers. None of them have helped. I am doing this instead of getting work done, which is defeating the whole purpose of using Ubuntu. It's heartbreaking to be honest. In the current state of "no networks are showing up", here are outputs from the random things that other people are usually asked to run: lspic 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) lsmod Module Size Used by e100 41119 0 nls_iso8859_1 12713 1 parport_pc 28284 0 ppdev 17106 0 bnep 18258 2 rfcomm 47863 12 binfmt_misc 17540 1 arc4 12573 2 rt2800usb 27201 0 rt2x00usb 20857 1 rt2800usb rt2800lib 68029 1 rt2800usb rt2x00lib 55764 3 rt2x00usb,rt2800lib,rt2800usb coretemp 13596 0 mac80211 656164 3 rt2x00lib,rt2x00usb,rt2800lib kvm_intel 138733 0 kvm 452835 1 kvm_intel cfg80211 547224 2 mac80211,rt2x00lib crc_ccitt 12707 1 rt2800lib ghash_clmulni_intel 13259 0 aesni_intel 55449 0 usb_storage 61749 1 aes_x86_64 17131 1 aesni_intel joydev 17613 0 xts 12922 1 aesni_intel nouveau 1001310 3 snd_hda_codec_hdmi 37407 1 lrw 13294 1 aesni_intel gf128mul 14951 2 lrw,xts mxm_wmi 13021 1 nouveau snd_hda_codec_realtek 46511 1 ablk_helper 13597 1 aesni_intel wmi 19256 2 mxm_wmi,nouveau snd_hda_intel 44397 5 ttm 88251 1 nouveau drm_kms_helper 49082 1 nouveau drm 295908 5 ttm,drm_kms_helper,nouveau snd_hda_codec 190010 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel cryptd 20501 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hwdep 13613 1 snd_hda_codec snd_pcm 102477 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel btusb 18291 0 snd_page_alloc 18798 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 i2c_algo_bit 13564 1 nouveau snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30417 1 snd_seq_midi snd_seq 61930 2 snd_seq_midi_event,snd_seq_midi bluetooth 251354 22 bnep,btusb,rfcomm snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi lpc_ich 17060 0 snd_timer 29989 2 snd_pcm,snd_seq mei 46588 0 snd 69533 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device psmouse 97838 0 microcode 22923 0 soundcore 12680 1 snd video 19467 1 nouveau mac_hid 13253 0 serio_raw 13215 0 lp 17799 0 parport 46562 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 47346 0 hid 101248 2 hid_generic,usbhid ahci 30063 3 libahci 32088 1 ahci e1000e 207005 0 ptp 18668 1 e1000e pps_core 14080 1 ptp sudo lshw -c network 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation Ethernet Connection I217-V (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port #1 (rev d4) 00:1c.2 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 610] (rev a1) 01:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1) 03:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03) sudo iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on sudo iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results NOTE: This dmesg was done after a reboot where the network manager was continuously displaying the "disconnected" message over and over. So it must have been trying to connect at this time. My network was displayed in the list of options, as the only option despite other devices picking up 12+ access points. The router channel is set to auto. dmesg | tail -30 [ 187.418446] wlan0: associated [ 190.405601] wlan0: disassociated from 00:14:d1:a8:c3:44 (Reason: 15) [ 190.443312] cfg80211: Calling CRDA to update world regulatory domain [ 190.443431] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 190.451635] cfg80211: World regulatory domain updated: [ 190.451643] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 190.451648] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451652] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 190.451659] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 190.451662] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 191.824451] wlan0: authenticate with 00:14:d1:a8:c3:44 [ 191.850608] wlan0: send auth to 00:14:d1:a8:c3:44 (try 1/3) [ 191.884604] wlan0: send auth to 00:14:d1:a8:c3:44 (try 2/3) [ 191.886309] wlan0: authenticated [ 191.886579] rt2800usb 3-5.3:1.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 191.886588] rt2800usb 3-5.3:1.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 191.889556] wlan0: associate with 00:14:d1:a8:c3:44 (try 1/3) [ 192.001493] wlan0: associate with 00:14:d1:a8:c3:44 (try 2/3) [ 192.040274] wlan0: RX AssocResp from 00:14:d1:a8:c3:44 (capab=0x431 status=0 aid=3) [ 192.044235] wlan0: associated [ 193.948188] wlan0: deauthenticating from 00:14:d1:a8:c3:44 by local choice (reason=3) [ 193.981501] cfg80211: Calling CRDA to update world regulatory domain [ 193.984080] cfg80211: World regulatory domain updated: [ 193.984082] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 193.984084] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984085] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 193.984086] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 193.984087] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) The router uses MAC filtering, and security is WPA PSK with cipher as auto. So, any ideas? Or is the solution just to not use 13.04 unless you have a wired connection? (I don't have this option.) If so, please just tell me straight. I survived 9.04 Jaunty, and I can survive 13.04 Raring. Update #1 Results from trying Wild Man's first answer: jii@conan:~$ echo "options rt2800usb nohwcrypt=y" | sudo tee /etc/modprobe.d/rt2800usb.conf options rt2800usb nohwcrypt=y jii@conan:~$ sudo modprobe -rfv rt2800usb rmmod rt2800usb rmmod rt2800lib rmmod crc_ccitt rmmod rt2x00usb rmmod rt2x00lib rmmod mac80211 rmmod cfg80211 jii@conan:~$ sudo modprobe -v rt2800usb insmod /lib/modules/3.10.0-031000-generic/kernel/lib/crc-ccitt.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800lib.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2x00usb.ko insmod /lib/modules/3.10.0-031000-generic/kernel/drivers/net/wireless/rt2x00/rt2800usb.ko nohwcrypt=y I tried: gksudo gedit /etc/pm/power.d/wireless but I didn't have the package. It said to install gksu. I tried that, but of course, not having Internet, I didn't get the package. So instead I did: sudo gedit /etc/pm/power.d/wireless Which created the file. Here is the body: #!/bin/sh /sbin/iwconfig wlan0 power off I then rebooted. No change. I tried adding exit 0 to the bottom of the wireless file, and rebooted. No change. Please note that this is a desktop machine. I'm assuming power management is primarily for laptops, but the iwconfig does state that power management is on, so who knows. The recommended router changes I did not do, since the current router settings are (I think) required for some of the older devices I have, and because the current settings work on all my modern devices including Ubuntu 12.04 and Windows 7. I do appreciate the advice though, and I'll look into it when I have time. Anything else to try? Update #2 I booted into Ubuntu 12.04.3 from a dvd, and the same problems exist. I have a separate old desktop machine with 12.04 installed that has no wireless problems at all. So obviously the problem is wireless hardware compatibility in both 12.04.03 LTS and 13.04. Update #3 The same problems exist even when using a wired connection. I plugged an ethernet cable directly to the router and the network manager added an "Auto Ethernet" entry, but it cannot establish a connection to it. So the problem is not specific to wireless. Meanwhile, I purchased a Trendnet N300 wireless USB adapter, TEW-664UB. I plugged it in, but I have no idea how to get Ubuntu to try and use it. Can anyone tell me how? Can I download a package on another computer and copy the .deb over to do an install, etc? I'm installing windows 7 to double check that the internet connection works there and it's not just some magically faulty hardware. Thanks for your help.

  Read the article

• CodePlex Daily Summary for Wednesday, May 07, 2014

  CodePlex Daily Summary for Wednesday, May 07, 2014Popular ReleasesSeal Report: Seal Report 1.4: New Features: Report Designer: New option to convert a Report Source into a Repository Source. Report Designer: New contextual helper menus to select, remove, copy, prompt elements in a model. Web Server: New option to expand sub-folders displayed in the tree view. Web Server: Web Folder Description File can be a .cshtml file to display a MVC View. Views: additional CSS parameters for some DIVs. NVD3 Chart: Some default configuration values have been changed. Issues Addressed:16 ...Magick.NET: Magick.NET 6.8.9.002: Magick.NET linked with ImageMagick 6.8.9.0.VidCoder: 1.5.22 Beta: Added ability to burn SRT subtitles. Updated to HandBrake SVN 6169. Added checks to prevent VidCoder from running with a database version newer than it expects. Tooltips in the Advanced Video panel now trigger on the field labels as well as the fields themselves. Fixed updating preset/profile/tune/level settings on changing video encoder. This should resolve some problems with QSV encoding. Fixed tunes and profiles getting set to blank when switching between x264 and x265. Fixed co...NuGet: NuGet 2.8.2: We will be releasing a 2.8.2 version of our own NuGet packages and the NuGet.exe command-line tool. The 2.8.2 release will not include updated VS or WebMatrix extensions. NuGet.Server.Extensions.dll needs to be used alongside NuGet-Signed.exe to provide the NuGet.exe mirror functionality.DNN CMS Platform: 07.03.00 BETA (Not For Production Use): DNN 7.3 release is focused on performance and we have made a variety of changes to improve the run-time characteristics of the platform. End users will notice faster page response time and administrators will appreciate a more responsive user experience, especially on larger scale web sites. This is a BETA release and is NOT recommended for production use. There is no upgrade path offered from this release to the final DNN 7.3 release. Known Issues - The Telerik RAD Controls for ASP.NET AJA...babelua: 1.5.3: V1.5.3 - 2014.5.6Stability improvement: support relative path when debugging lua files; improve variable view function in debugger; fix a bug that when a file is loaded at runtime , its breakpoints would not take effect; some other bug fix; New feature: improve tool windows color scheme to look better with different vs themes; comment/uncomment code block easily; some other improve;CTI Text Encryption: CTI Text Encryption 5.0: Improve encryption algorithm. Simplify all-non encryption related mechanism (Simplify user interface)SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 2.0.2: SmartStore.NET 2.0.2 is primarily a maintenance release for version 2.0.0, which has been released on April 04 2014. It contains several improvements & important fixes. BugfixesIMPORTANT FIX: Memory leak leads to OutOfMemoryException in application after a while Installation fix: some varchar(MAX) columns get created as varchar(4000). Added a migration to fix the column specs. Installation fix: Setup fails with exception Value cannot be null. Parameter name: stream Bugfix for stock iss...Channel9's Absolute Beginner Series: Windows Phone 8.1: Entire source code for Windows Phone 8.1 Absolute Beginner Series.BIDS Helper: BIDS Helper 1.6.6: This BIDS Helper beta release brings support for SQL Server 2014 and SSDTBI for Visual Studio 2013. (Note that SSDTBI for Visual Studio 2013 is currently unavailable to download from Microsoft. We are releasing BIDS Helper support to help those who downloaded it before it became unavailable, and we will recheck BIDS Helper 2014 is compatible after SSDTBI becomes available to download again.) BIDS Helper 2014 Beta Limitations: SQL Server 2014 support for Biml is still in progress, so this bet...Windows Phone IsoStoreSpy (a cool WP8.1 + WP8 Isolated Storage Explorer): IsoStoreSpy WP8.1 3.0.0.0 (Win8 only): 3.0.0.0 + WP8.1 & WP8 device allowed + Local, Roaming or Temp directory Selector for WindowsRuntime apps + Version number in the title :)CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.24.0: ShortcutMapping panel now allows direct modification of the shortcuts. Custom updater dropped support for MSI installation but it still allows downloading of MSI http://www.csscript.net/npp/codeplex/non_msi_update.pngProDinner - ASP.NET MVC Sample (EF5, N-Tier, jQuery): 8.2: upgrade to mvc 5 upgrade to ASP.net MVC Awesome 4.0, EF 6.1, latest jcrop, Windsor Castle etc. ability to show/hide the dog using tinymce for the feedback page mobile friendly uiASP.net MVC Awesome - jQuery Ajax Helpers: 4.0: version 4.0 ========================== - added InitPopup, InitPopupForm helpers, open initialized popups using awe.open(name, params) - added Tag or Tags for all helpers, usable in mod code - added popup aweclose, aweresize events - popups have api accessible via .data('api'), with methods open, close and destroy - all popups have .awe-popup class - popups can be grouped using .Group(string), only 1 popup in the same group can exist at the same time - added awebeginload event for...SEToolbox: SEToolbox 01.028.008 Release 2: Fixes for drag-drop copying. Added ship joiner, to rejoin a broken ship! Installation of this version will replace older version.ScreenToGif: Release 1.0: What's new: • Small UI tweaks everywhere. • You can add Text, Subtitles and Title Frames. • Processing the gif now takes less time. • Languages: Spanish, Italian and Tamil added. • Single .exe multi language. • Takes less time to apply blur and pixelated efect. • Restart button. • Language picker. (If the user wants to select a diferent language than the system's) • "Encoding Finished" page with a link to open the file. • GreenScreen unchanged pixels to save kilobytes. • "Check for Updates" t...Touchmote: Touchmote 1.0 beta 11: Changes Support for multiple monitor setup Additional settings for analog sticks More reliable pairing Bug fixes and improvementsPowerShell App Deployment Toolkit: PowerShell App Deployment Toolkit v3.1.2: Added Get-IniValue / Set-IniValue functions. Replaces Get-IniContent / Set-IniContent which were a bit unwieldy. The new functions are much easier to use. Added -Value parameter to Get-RegistryKey so that a specific registry value can be retrieved instead of the entire Key as an object Fixed Test-Battery to work with machines that can have multiple batteries Fixed issue where BlockExecution would fail if a Custom Temp Path was specified in the config file Updated examples with latest ...Microsoft Script Analyzer: Microsoft Script Analyzer 1.1: The Script Analyzer scans your current PowerShell script code against some PowerShell best practice rules, and provide suggestions to improve the script quality and readability. By double-clicking the checking result, the relevant script code will be highlighted in the code editor. Script Analyzer result You can configure the Script Analyzer rules in the Settings window of Script Analyzer. Script Analyzer settings The current release includes 5 PowerShell best practice rules. Invoke-...Microsoft Script Browser: Script Browser 1.1: Script Browser for Windows PowerShell ISE was designed and developed in response to many IT Pros’ and MVPs’ feedback during the MVP Global Summit. It puts nearly 10K script examples at IT Pros fingertips when they write scripts to automate their IT tasks. Users can search, learn, download and manage scripts from within their scripting environment - PowerShell ISE - with just a few button clicks. It saves the time of switching back and forth between webpages and scripting environment, and also...New ProjectsAOP.Net: this project is used to implement AOP in .NetARTYKLES: Project articles ASP.NET Identity 2.0 Azure Table Storage: This project provides a high performance cloud solution for ASP.NET Identity 2.0 using Azure Table storage replacing the Entity Framework / MSSQL provider.Associativy Taxonomies Adapter: Administration module for the Associativy (http://associativy.com) Orchard graph platform.BancoSim: BancoSim inicioChaosKit: Chaos theory based time series analysis library, calculating Lyapunov and Hurst exponents and making iterated predictions.ElectrodomesticosAbr2014: Proyecto de ElectrodomesticosGPM: general privilege systemLNTest: LNTestLocal Electrodomésticos 001: Se tiene un local de electrodomésticos que tiene intensión de salir a online. MVC - Filtered TextBox: The project contains MVC Html helper methods for rendering a filtered text box that allows the user to enter only a given set of characters.MvcTrialer: A simple class for .NET 4 MVC to redirect pages if users exceeded a trial period date.NotificationsExtensions.Portable: Portable Class Library Version of the NotificationsExtensions NuGet Packages. Used to Create WinRT/Windows Phone Notification XML.OBD-II: Cross platform library for communicating with OBD-II adapters.Powershell Analyze Robocopy Logs and mail its results: It analyzes a path with Robocopy Log files. It'll create a summary file with information about all log files and it'll mail its results.Proyecto Electrodomesticos: proyecto electrodomesticosPrueba1: asdPVT Library: PVT library for calculating the thermodynamic properties of fluidQuanLyPhongMachThuY: Project serve for .NET CourcseRAMED: project that give some functionalities to ramed projects management like permissions and capabilities to make the management of this type of projects easierSimple Contacts: Simple Contacts Directory application built with ASP.NET MVC and Web API that perform basic CRUD (create, read, update, delete) operations.Stream oriented base64 encoder and decoder: Very simple implementation of stream oriented base64 encoder and decoder, which uses standard .NET Stream decorators. Super Casa de Electronica: no se q escribirTiny Deduplicator: Tiny Deduplicator is a file deduplicator which can scan for duplicate files, and allows the user to control which duplicates they are going to keep or recycle.webdemo: DemonstrationWindows Embedded Compact Edition 2013 File Transfer: A console app for transferring files using TCPIP between Windows Embedded Compact devices, and between them and the desktop. Compact 2013 and Desktop versions.Windows Tile Updater: An simple example of using the Microsoft Universal App to update a tile on the start screen. This was created to accompany a series of blog posts.WMI.NET: WMI.NET Demo Project form Win32 ClassesWumper Thumpers: The ultimate sweg

  Read the article

• SQL Sentry First Impressions

  - by AjarnMark

  After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server.  Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers.  The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession.  I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance.  Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?).  These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons).  I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools.  Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server.  Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view.  This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat.  But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view.  Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager.  At the time, I just thought he worked there, but later found out that he founded the company.  When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor.  And I must say that I really like what I see so far.  Here are a few highlights: Great Support.  I had two issues getting the trial setup and monitoring a handful of our servers.  One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly).  In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them.  This left me with a great impression of the company.  Kudos to them! Chaining and Queueing.  While I have not yet activated this feature, I am very excited about the possibilities.  We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that.  It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View.  I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity.  Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View.  This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics.  This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name.  This was a big and VERY pleasant surprise.  If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job.  This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for.  But with SQL Sentry Event Manager you do.  The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for.  And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information.  I did not expect this at all, but I sure do like it.  HOORAY! That is just my first impressions from using the tools for a few days.  And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations.  I’ll share that lesson in another blog entry.  But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

  Read the article

• 5 Best Practices - Laying the Foundation for WebCenter Projects

  - by Kellsey Ruppel

  Today’s guest post comes from Oracle WebCenter expert John Brunswick. John specializes in enterprise portal and content management solutions and actively contributes to the enterprise software business community and has authored a series of articles about optimal business involvement in portal, business process management and SOA development, examining ways of helping organizations move away from monolithic application development. We’re happy to have John join us today! Maximizing success with Oracle WebCenter portal requires a strategic understanding of Oracle WebCenter capabilities.  The following best practices enable the creation of portal solutions with minimal resource overhead, while offering the greatest flexibility for progressive elaboration. They are inherently project agnostic, enabling a strong foundation for future growth and an expedient return on your investment in the platform.  If you are able to embrace even only a few of these practices, you will materially improve your deployment capability with WebCenter. 1. Segment Duties Around 3Cs - Content, Collaboration and Contextual Data "Agility" is one of the most common business benefits touted by modern web platforms.  It sounds good - who doesn't want to be Agile, right?  How exactly IT organizations go about supplying agility to their business counterparts often lacks definition - hamstrung by ambiguity. Ultimately, businesses want to benefit from reduced development time to deliver a solution to a particular constituent, which is augmented by as much self-service as possible to develop and manage the solution directly. All done in the absence of direct IT involvement. With Oracle WebCenter's depth in the areas of content management, pallet of native collaborative services, enterprise mashup capability and delegated administration, it is very possible to execute on this business vision at a technical level. To realize the benefits of the platform depth we can think of Oracle WebCenter's segmentation of duties along the lines of the 3 Cs - Content, Collaboration and Contextual Data.  All three of which can have their foundations developed by IT, then provisioned to the business on a per role basis. Content – Oracle WebCenter benefits from an extremely mature content repository.  Work flow, audit, notification, office integration and conversion capabilities for documents (HTML & PDF) make this a haven for business users to take control of content within external and internal portals, custom applications and web sites.  When deploying WebCenter portal take time to think of areas in which IT can provide the "harness" for content to reside, then allow the business to manage any content items within the site, using the content foundation to ensure compliance with business rules and process.  This frees IT to work on more mission critical challenges and allows the business to respond in short order to emerging market needs. Collaboration – Native collaborative services and WebCenter spaces are a perfect match for business users who are looking to enable document sharing, discussions and social networking.  The ability to deploy the services is granular and on the basis of roles scoped to given areas of the system - much like the first C “content”.  This enables business analysts to design the roles required and IT to provision with peace of mind that users leveraging the collaborative services are only able to do so in explicitly designated areas of a site. Bottom line - business will not need to wait for IT, but cannot go outside of the scope that has been defined based on their roles. Contextual Data – Collaborative capabilities are most powerful when included within the context of business data.  The ability to supply business users with decision shaping data that they can include in various parts of a portal or portals, just as they would with content items, is one of the most powerful aspects of Oracle WebCenter.  Imagine a discussion about new store selection for a retail chain that re-purposes existing information from business intelligence services about various potential locations and or custom backend systems - presenting it directly in the context of the discussion.  If there are some data sources that are preexisting in your enterprise take a look at how they can be made into discrete offerings within the portal, then scoped to given business user roles for inclusion within collaborative activities. 2. Think Generically, Execute Specifically Constructs.  Anyone who has spent much time around me knows that I am obsessed with this word.  Why? Because Constructs offer immense power - more than APIs, Web Services or other technical capability. Constructs offer organizations the ability to leverage a platform's native characteristics to offer substantial business functionality - without writing code.  This concept becomes more powerful with the additional understanding of the concepts from the platform that an organization learns over time.  Let's take a look at an example of where an Oracle WebCenter construct can substantially reduce the time to get a subscription-based site out the door and into the hands of the end consumer. Imagine a site that allows members to subscribe to specific disciplines to access information and application data around that various discipline.  A space is a collection of secured pages within Oracle WebCenter.  Spaces are not only secured, but also default content stored within it to be scoped automatically to that space. Taking this a step further, Oracle WebCenter’s Activity Stream surfaces events, discussions and other activities that are scoped to the given user on the basis of their space affiliations.  In order to have a portal that would allow users to "subscribe" to information around various disciplines - spaces could be used out of the box to achieve this capability and without using any APIs or low level technical work to achieve this. 3. Make Governance Work for You Imagine driving down the street without the painted lines on the road.  The rules of the road are so ingrained in our minds, we often do not think about the process, but seemingly mundane lane markers are critical enablers. Lane markers allow us to travel at speeds that would be impossible if not for the agreed upon direction of flow. Additionally and more importantly, it allows people to act autonomously - going where they please at any given time. The return on the investment for mobility is high enough for people to buy into globally agreed up governance processes. In Oracle WebCenter we can use similar enablers to lane markers.  Our goal should be to enable the flow of information and provide end users with the ability to arrive at business solutions as needed, not on the basis of cumbersome processes that cannot meet the business needs in a timely fashion. How do we do this? Just as with "Segmentation of Duties" Oracle WebCenter technologies offer the opportunity to compartmentalize various business initiatives from each other within the system due to constructs and security that are available to use within the platform. For instance, when a WebCenter space is created, any content added within that space by default will be secured to that particular space and inherits meta data that is associated with a folder created for the space. Oracle WebCenter content uses meta data to support a broad range of rich ECM functionality and can automatically impart retention, workflow and other policies automatically on the basis of what has been defaulted for that space. Depending on your business needs, this paradigm will also extend to sub sections of a space, offering some interesting possibilities to enable automated management around content. An example may be press releases within a particular area of an extranet that require a five year retention period and need to the reviewed by marketing and legal before release.  The underlying content system will transparently take care of this process on the basis of the above rules, enabling peace of mind over unstructured data - which could otherwise become overwhelming. 4. Make Your First Project Your Second Imagine if Michael Phelps was competing in a swimming championship, but told right before his race that he had to use a brand new stroke.  There is no doubt that Michael is an outstanding swimmer, but chances are that he would like to have some time to get acquainted with the new stroke. New technologies should not be treated any differently.  Before jumping into the deep end it helps to take time to get to know the new approach - even though you may have been swimming thousands of times before. To quickly get a handle on Oracle WebCenter capabilities it can be helpful to deploy a sandbox for the team to use to share project documents, discussions and announcements in an effort to help the actual deployment get under way, while increasing everyone’s knowledge of the platform and its functionality that may be helpful down the road. Oracle Technology Network has made a pre-configured virtual machine available for download that can be a great starting point for this exercise. 5. Get to Know the Community If you are reading this blog post you have most certainly faced a software decision or challenge that was solved on the basis of a small piece of missing critical information - which took substantial research to discover.  Chances were also good that somewhere, someone had already come across this information and would have been excited to share it. There is no denying the power of passionate, connected users, sharing key tips around technology.  The Oracle WebCenter brand has a rich heritage that includes industry-leading technology and practitioners.  With the new Oracle WebCenter brand, opportunities to connect with these experts has become easier. Oracle WebCenter Blog Oracle Social Enterprise LinkedIn WebCenter Group Oracle WebCenter Twitter Oracle WebCenter Facebook Oracle User Groups Additionally, there are various Oracle WebCenter related blogs by an excellent grouping of services partners.

  Read the article

• Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

  - by Richard Rotter

  Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

  Read the article

• Christmas in the Clouds

  - by andrewbrust

  I have been spending the last 2 weeks immersing myself in a number of Windows Azure and SQL Azure technologies.  And in setting up a new business (I’ll speak more about that in the future), I have also become a customer of Microsoft’s BPOS (Business Productivity Online Services).  In short, it has been a fortnight of Microsoft cloud computing. On the Azure side, I’ve looked, of course, at Web Roles and Worker Roles.  But I’ve also looked at Azure Storage’s REST API (including coding to it directly), I’ve looked at Azure Drive and the new VM Role; I’ve looked quite a bit at SQL Azure (including the project “Houston” Silverlight UI) and I’ve looked at SQL Azure labs’ OData service too. I’ve also looked at DataMarket and its integration with both PowerPivot and native Excel.  Then there’s AppFabric Caching, SQL Azure Reporting (what I could learn of it) and the Visual Studio tooling for Azure, including the storage of certificate-based credentials.  And to round it out with some user stuff, on the BPOS side, I’ve been working with Exchange Online, SharePoint Online and LiveMeeting. I have to say I like a lot of what I’ve been seeing.  Azure’s not perfect, and BPOS certainly isn’t either.  But there’s good stuff in all these products, and there’s a lot of value. Azure Goes Deep Most people know that Web and Worker roles put the platform in charge of spinning virtual machines up and down, and keeping them up to date. But you can go way beyond that now.  The still-in-beta VM Role gives you the power to craft the machine (much as does Amazon’s EC2), though it takes away the platform’s self-managing attributes.  It still spins instances up and down, making drive storage non-durable, but Azure Drive gives you the ability to store VHD files as blobs and mount them as virtual hard drives that are readable and writeable.  Whether with Azure Storage or SQL Azure, Azure does data.  And OData is everywhere.  Azure Table Storage supports an OData Interface.  So does SQL Azure and so does DataMarket (the former project “Dallas”).  That means that Azure data repositories aren’t just straightforward to provision and configure…they’re also easy to program against, from just about any programming environment, in a RESTful manner.  And for more .NET-centric implementations, Azure AppFabric caching takes the technology formerly known as “Velocity” and throws it up into the cloud, speeding data access even more. Snapping in Place Once you get the hang of it, this stuff just starts to work in a way that becomes natural to understand.  I wasn’t expecting that, and I was really happy to discover it. In retrospect, I am not surprised, because I think the various Azure teams are the center of gravity for Redmond’s innovation right now.  The products belie this and so do my observations of the product teams’ motivation and high morale.  It is really good to see this; Microsoft needs to lead somewhere, and they need to be seen as the underdog while doing so.  With Azure, both requirements are in place.   BPOS: Bad Acronym, Easy Setup BPOS is about products you already know; Exchange, SharePoint, Live Meeting and Office Communications Server.  As such, it’s hard not to be underwhelmed by BPOS.  Until you realize how easy it makes it to get all that stuff set up.  I would say that from sign-up to productive use took me about 45 minutes…and that included the time necessary to wrestle with my DNS provider, set up Outlook and my SmartPhone up to talk to the Exchange account, create my SharePoint site collection, and configure the Outlook Conferencing add-in to talk to the provisioned Live Meeting account. Never before did I think setting up my own Exchange mail could come anywhere close to the simplicity of setting up an SMTP/POP account, and yet BPOS actually made it faster.   What I want from my Azure Christmas Next Year Not everything about Microsoft’s cloud is good.  I close this post with a list of things I’d like to see addressed: BPOS offerings are still based on the 2007 Wave of Microsoft server technologies.  We need to get to 2010, and fast.  Arguably, the 2010 products should have been released to the off-premises channel before the on-premise sone.  Office 365 can’t come fast enough. Azure’s Internet tooling and domain naming, is scattered and confusing.  Deployed ASP.NET applications go to cloudapp.net; SQL Azure and Azure storage work off windows.net.  The Azure portal and Project Houston are at azure.com.  Then there’s appfabriclabs.com and sqlazurelabs.com.  There is a new Silverlight portal that replaces most, but not all of the HTML ones.  And Project Houston is Silvelright-based too, though separate from the Silverlight portal tooling. Microsoft is the king off tooling.  They should not make me keep an entire OneNote notebook full of portal links, account names, access keys, assemblies and namespaces and do so much CTRL-C/CTRL-V work.  I’d like to see more project templates, have them automatically reference the appropriate assemblies, generate the right using/Imports statements and prime my config files with the right markup.  Then I want a UI that lets me log in with my Live ID and pick the appropriate project, database, namespace and key string to get set up fast. Beta programs, if they’re open, should onboard me quickly.  I know the process is difficult and everyone’s going as fast as they can.  But I don’t know why it’s so difficult or why it takes so long.  Getting developers up to speed on new features quickly helps popularize the platform.  Make this a priority. Make Azure accessible from the simplicity platforms, i.e. ASP.NET Web Pages (Razor) and LightSwitch.  Support .NET 4 now.  Make WebMatrix, IIS Express and SQL Compact work with the Azure development fabric. Have HTML helpers make Azure programming easier.  Have LightSwitch work with SQL Azure and not require SQL Express.  LightSwitch has some promising Azure integration now.  But we need more.  WebMatrix has none and that’s just silly, now that the Extra Small Instance is being introduced. The Windows Azure Platform Training Kit is great.  But I want Microsoft to make it even better and I want them to evangelize it much more aggressively.  There’s a lot of good material on Azure development out there, but it’s scattered in the same way that the platform is.   The Training Kit ties a lot of disparate stuff together nicely.  Make it known. Should Old Acquaintance Be Forgot All in all, diving deep into Azure was a good way to end the year.  Diving deeper into Azure should a great way to spend next year, not just for me, but for Microsoft too.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• CodePlex Daily Summary for Monday, June 24, 2013

  CodePlex Daily Summary for Monday, June 24, 2013Popular ReleasesVG-Ripper & PG-Ripper: VG-Ripper 2.9.43: changes NEW: Added Support for "ImageJumbo.com" links NEW: Added Support for "ImgTiger.com" links NEW: Added Support for "ImageDax.net" links NEW: Added Support for "HosterBin.com" links FIXED: "ImgServe.net" linksWPF Composites: Version 4.3.0: In this Beta release, I broke my code out into two separate projects. There is a core FasterWPF.dll with the minimal required functionality. This can run with only the Aero.dll and the Rx .dll's. Then, I have a FasterWPFExtras .dll that requires and supports the Extended WPF Toolkit™ Community Edition V 1.9.0 (including Xceed DataGrid) and the Thriple .dll. This is for developers who want more . . . Finally, you may notice the other OPTIONAL .dll's available in the download such as the Dyn...Windows.Forms.Controls Revisited (SSTA.WinForms): SSTA.WinForms 1.0.0: Latest stable releaseAscend 3D: Ascend 2.0: Release notes: Implemented bone/armature animation Refactored class hierarchy and naming Addressed high CPU usage issue during animation Updated the Blender exporter and Ascend model format (now XML) Created AscendViewer, a tool for viewing Ascend modelsIndent Guides for Visual Studio: Indent Guides v13: ImportantThis release does not support Visual Studio 2010. The latest stable release for VS 2010 is v12.1. Version History Changed in v13 Added page width guide lines Added guide highlighting options Fixed guides appearing over collapsed blocks Fixed guides not appearing in newly opened files Fixed some potential crashes Fixed lines going through pragma statements Various updates for VS 2012 and VS 2013 Removed VS 2010 support Changed in v12.1: Fixed crash when unable to start...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.1.0 - Prerelease d: Fluent Ribbon Control Suite 2.1.0 - Prerelease d(supports .NET 3.5, 4.0 and 4.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (not for .NET 3.5) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery *Walkthrough (do...Magick.NET: Magick.NET 6.8.5.1001: Magick.NET compiled against ImageMagick 6.8.5.10. Breaking changes: - MagickNET.Initialize has been made obsolete because the ImageMagick files in the directory are no longer necessary. - MagickGeometry is no longer IDisposable. - Renamed dll's so they include the platform name. - Image profiles can now only be accessed and modified with ImageProfile classes. - Renamed DrawableBase to Drawable. - Removed Args part of PathArc/PathCurvetoArgs/PathQuadraticCurvetoArgs classes. The...Three-Dimensional Maneuver Gear for Minecraft: TDMG 1.1.0.0 for 1.5.2: CodePlex???(????????) ?????????(???1/4) ??????????? ?????????? ???????????(??????????) ??????????????????????? ↑????、?????????????????????(???????) ???、??????????、?????????????????????、????????1.5?????????? Shift+W(????)??????????????????10°、?10°(?????????)???Hyper-V Management Pack Extensions 2012: HyperVMPE2012 (v1.0.1.126): Hyper-V Management Pack Extensions 2012 Beta ReleaseOutlook 2013 Add-In: Email appointments: This new version includes the following changes: - Ability to drag emails to the calendar to create appointments. Will gather all the recipients from all the emails and create an appointment on the day you drop the emails, with the text and subject of the last selected email (if more than one selected). - Increased maximum of numbers to display appointments to 30. You will have to uninstall the previous version (add/remove programs) if you had installed it before. Before unzipping the file...Caliburn Micro: WPF, Silverlight, WP7 and WinRT/Metro made easy.: Caliburn.Micro v1.5.2: v1.5.2 - This is a service release. We've fixed a number of issues with Tasks and IoC. We've made some consistency improvements across platforms and fixed a number of minor bugs. See changes.txt for details. Packages Available on Nuget Caliburn.Micro – The full framework compiled into an assembly. Caliburn.Micro.Start - Includes Caliburn.Micro plus a starting bootstrapper, view model and view. Caliburn.Micro.Container – The Caliburn.Micro inversion of control container (IoC); source code...SQL Compact Query Analyzer: 1.0.1.1511: Beta build of SQL Compact Query Analyzer Bug fixes: - Resolved issue where the application crashes when loading a database that contains tables without a primary key Features: - Displays database information (database version, filename, size, creation date) - Displays schema summary (number of tables, columns, primary keys, identity fields, nullable fields) - Displays the information schema views - Displays column information (database type, clr type, max length, allows null, etc) - Support...CODE Framework: 4.0.30618.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.Toolbox for Dynamics CRM 2011: XrmToolBox (v1.2013.6.18): XrmToolbox improvement Use new connection controls (use of Microsoft.Xrm.Client.dll) New display capabilities for tools (size, image and colors) Added prerequisites check Added Most Used Tools feature Tools improvementNew toolSolution Transfer Tool (v1.0.0.0) developed by DamSim Updated toolView Layout Replicator (v1.2013.6.17) Double click on source view to display its layoutXml All tools list Access Checker (v1.2013.6.17) Attribute Bulk Updater (v1.2013.6.18) FetchXml Tester (v1.2013.6.1...Media Companion: Media Companion MC3.570b: New* Movie - using XBMC TMDB - now renames movies if option selected. * Movie - using Xbmc Tmdb - Actor images saved from TMDb if option selected. Fixed* Movie - Checks for poster.jpg against missing poster filter * Movie - Fixed continual scraping of vob movie file (not DVD structure) * Both - Correctly display audio channels * Both - Correctly populate audio info in nfo's if multiple audio tracks. * Both - added icons and checked for DTS ES and Dolby TrueHD audio tracks. * Both - Stream d...Document.Editor: 2013.24: What's new for Document.Editor 2013.24: Improved Video Editing support Improved Link Editing support Minor Bug Fix's, improvements and speed upsExtJS based ASP.NET Controls: FineUI v3.3.0: ??FineUI ?? ExtJS ??? ASP.NET ???。 FineUI??? ?? No JavaScript，No CSS，No UpdatePanel，No ViewState，No WebServices ???????。 ?????? IE 7.0、Firefox 3.6、Chrome 3.0、Opera 10.5、Safari 3.0+ ???? Apache License v2.0 ?：ExtJS ?? GPL v3 ?????(http://www.sencha.com/license)。 ???? ??：http://fineui.com/bbs/ ??：http://fineui.com/demo/ ??：http://fineui.com/doc/ ??：http://fineui.codeplex.com/ FineUI???? ExtJS ?????????，???? ExtJS ?。 ????? FineUI ? ExtJS ?：http://fineui.com/bbs/forum.php?mod=viewthrea...BarbaTunnel: BarbaTunnel 8.0: Check Version History for more information about this release.ExpressProfiler: ExpressProfiler v1.5: [+] added Start time, End time event columns [+] added SP:StmtStarting, SP:StmtCompleted events [*] fixed bug with Audit:Logout eventpatterns & practices: Data Access Guidance: Data Access Guidance Drop4 2013.06.17: Drop 4New ProjectsActivity Injector: Activity Injector is mainly used in unit testing workflow activities.Application Starter Tremens: Application for starting ApplicationaAudiwikiREF: This project is created to finish my referral assignment because i faced many problems with the previous one where i couldn't connect the project and commit. AVTS GLUCK ANTIVIRUS SYSTEM: AVTS Gluck AntiVirus System - the best antivirus made by young developers from Ukraine. It was writed in C#, C++, VB.NET, Excutable files, PHP DS, .and more....Base64 File Converter: File converting tool that converts any file into Base64 TXT file and vice versa just by drag-and-drop gesture.Basket Builders Umbraco bootstrap packages: Our umbraco packages to speed up project Bugzy Bug Tracking and Work Management: Creating Bug Tracking and Work Managment system while helping the JSON-RPC standard become as strong as the Bloated XML-RPC(SOAP)Dalmatian Build Script: Dalmatian allows you to automate your build using C# of VB.NETDécouverte Majeure MISN Chrono-courses: Chronocourses projectDocToolTip Library: DocToolTip library allows creating screenshots of winform forms with the name and type of component controls.DotaPick: SummaryHiUpdateTools - easy publish and update your app: HiUpdateTools is a easy tools to use publish new version of your application Kinect Skeleton Recorder: Records and shows XBox 360 Kinect skeleton data using windows forms. Saves the data as XML that can be read by other applications for use in animation.MARIT (BETA): MARIT is a simple drawing app for Android. More features are on the todo-list so stay tuned! Feedback and requests are appreciated. MvcToolbox: MVC Toolbox is a library which contains lots of usefull methods which will help developer to write less code and to be more productive.PrototypeRef: list of testing toolsSmartPlay: SmartPlaySolid Geometry Simulation: Implements a simple fur/hair dynamic engine using physBAM. This package includes a semi-implicit solver for hair simulation and plugins for maya/houdini.Windows.Forms.Controls Revisited (SSTA.WinForms): SearchableListBox control built on the Window,Form.ListBox renders a list box items with multiple search terms highlighted.YiLeSystem: This is a dining system.

  Read the article

• The Future of Project Management is Social

  - by Natalia Rachelson

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Kazim Isfahani, Director, Product Marketing, Oracle Rapid Ascent. Breakneck Speed. Lightning Fast. Perhaps even overwhelming. No matter which set of adjectives we use to describe it, social media’s rise into the enterprise mainstream has been unprecedented. Indeed, the big 4 social media powerhouses (Facebook, Google+, LinkedIn, and Twitter), have nearly 2 Billion users between them. You may be asking (as you should really) “That’s all well and good for the consumer, but for me at my company, what’s your point? Beyond the fact that I can check and post updates, that is.” Good question, kind sir. Impact of Social and Collaboration on Project Management I’ll dovetail this discussion to the project management realm, since that’s what I’m writing about. Speed is a big challenge for project-driven organizations. Anything that can help speed up project delivery - be it a new product introduction effort or a geographical expansion project - fast is a good thing. So where does this whole social thing fit particularly since there are already a host of tools to help with traditional project execution? The fact is companies have seen improvements in their productivity by deploying departmental collaboration and other social-oriented solutions. McKinsey’s survey on social tools shows we have reached critical scale: 72% of respondents report that their companies use at least one and over 40% say they are using social networks and blogs. We don’t hear as much about the impact of social media technologies at the project and project manager level, but that does not mean there is none. Consider the new hire. The type of individual entering the workforce and executing on projects is a generation of worker expecting visually appealing, easy to use and easy to understand technology meshing hand-in-hand with business processes. Consider the project manager. The social era has enhanced the role that the project manager must play. Today’s project manager must be a supreme communicator, an influencer, a sympathizer, a negotiator, and still manage to keep all stakeholders in the loop on project progress. Social tools play a significant role in this effort. Now consider the impact to the project team. The way that a project team functions has changed, with newer, social oriented technologies making the process of information dissemination and team communications much more fluid. It’s clear that a shift is occurring where “social” is intersecting with project management. The Rise of Social Project Management We refer to the melding of project management and social networking as Social Project Management. Social Project Management is based upon the philosophy that the project team is one part of an integrated whole, and that valuable and unique abilities exist within the larger organization. For this reason, Social Project Management systems should be integrated into the collaborative platform(s) of an organization, allowing communication to proceed outside the project boundaries. What makes social project management "social" is an implicit awareness where distributed teams build connected links in ways that were previously restricted to teams that were co-located. Just as critical, Social Project Management embraces the vision of seamless online collaboration within a project team, but also provides for, (and enhances) the use of rigorous project management techniques. Social Project Management acknowledges that projects (particularly large projects) are a social activity - people doing work with people, for other people, with commitments to yet other people. The more people (larger projects), the more interpersonal the interactions, and the more social affects the project. The Epitome of Social - Fusion Project Portfolio Management If I take this one level further to discuss Fusion Project Portfolio Management, the notion of Social Project Management is on full display. With Fusion Project Portfolio Management, project team members have a single place for interaction on projects and access to any other resources working within the Fusion ERP applications. This allows team members the opportunity to be informed with greater participation and provide better information. The application’s the visual appeal, and highly graphical nature makes it easy to navigate information. The project activity stream adds to the intuitive user experience. The goal of productivity is pervasive throughout Fusion Project Portfolio Management. Field research conducted with Oracle customers and partners showed that users needed a way to stay in the context of their core transactions and yet easily access social networking tools. This is manifested in the application so when a user executes a business process, they not only have the transactional application at their fingertips, but also have things like e-mail, SMS, text, instant messaging, chat – all providing a number of different ways to interact with people and/or groups of people, both internal and external to the project and enterprise. But in the end, connecting people is relatively easy. The larger issue is finding a way to serve up relevant, system-generated, actionable information, in real time, which will allow for more streamlined execution on key business processes. Fusion Project Portfolio Management’s design concept enables users to create project communities, establish discussion threads, manage event calendars as well as deliver project based work spaces to organize communications within the context of a project – all within a secure business environment. We’d love to hear from you and get your thoughts and ideas about how Social Project Management is impacting your organization. To learn more about Oracle Fusion Project Portfolio Management, please visit this link

  Read the article

• Spacewalk 2.0 provided to manage Oracle Linux systems

  - by wcoekaer

  Oracle Linux customers have a few options to manage and provision their servers. We provide a license to use Oracle Enterprise Manager's Linux OS management, monitoring and provisioning features without additional cost for every server that has an Oracle Linux support subscription. So there is no additional pack to license and no additional per server cost, it's all included in our Basic, Premier and Systems support subscriptions. The nice thing with Oracle Enterprise Manager is that you end up with a single management product that can manage all aspects of your software stack. You have complete insight into the applications running, you have roles and responsibilities, you have third party connectors for storage or other products and it makes it very easy and convenient to correlate data and events when something happens. If you use Oracle VM as well, you end up with a complete cloud portal with selfservice, chargeback, etc... Another, much simpler option, is just using yum. It is very easy to take a server and create directories and expose these through apache as repositories. You can have a simple yum config on each server pointing to a few specific repositories. It requires some manual effort in terms of creating directories, downloading packages and creating local repo files but it's easy to do and for many people a preferred solution. There are also a good number of customers that just connect their servers directly to ULN or to our free update server public-yum. Just to re-iterate, our public-yum servers have all the errata and updates available for free. Now we added another option. Many of our customers have switched from a competing Linux vendor and they had familiarity with their management tools. Switching to Oracle for support is very easy since we don't require changes to the installed servers but we also want to make sure there is a very easy and almost transparent switch for the management tools as well. While Oracle Enterprise Manager is our preferred way of managing systems, we now are offering Spacewalk 2.0 to our customers. The community project can be found here. We have made a few changes to ensure easy and complete support for Oracle Linux, tested it with public-yum, etc.. You can find the rpms in our public-yum repos at http://public-yum.oracle.com/repo/OracleLinux/OL6/. There are repositories for spacewalk server and then for each version (OL5,OL6) and architecture (x86 and x86-64) we have the client repositories as well. Spacewalk itself is only made available for OL6 x86-64. Documentation can be found here. I set it up myself and here are some quick steps on how you can get going in just a matter of minutes: Spacewalk Server Installation : 1) Installing an Oracle Database Use an existing Oracle Database or install a new Oracle Database (Standard or Enterprise Edition) [at this time use 11g, we will add support for 12c in the near future]. This database can be installed on the spacewalk server or on a separate remote server. While Oracle XE might work to create a small sample POC, we do not support the use of Oracle XE, spacewalk repositories can become large and create a significant database workload. Customers can use their existing database licenses, they can download the database with a trial licence from http://edelivery.oracle.com or Oracle Linux subscribers (customers) will be allowed to use the Oracle Database as a spacewalk repository as part of their Oracle Linux subscription at no additional cost. |NOTE : spacewalk requires the database to be configured with the UTF8 characterset. |Installation will fail if your database does not use UTF8. |To verify if your database is configured correctly, run the following command in sqlplus: | |select value from nls_database_parameters where parameter='NLS_CHARACTERSET'; |This should return 'AL32UTF8' 2) Configure the database schema for spacewalk Ideally, create a tablespace in the database to hold the spacewalk schema tables/data; create tablespace spacewalk datafile '/u01/app/oracle/oradata/orcl/spacewalk.dbf' size 10G autoextend on; Create the database user spacewalk (or use some other schema name) in sqlplus. example : create user spacewalk identified by spacewalk; grant connect, resource to spacewalk; grant create table, create trigger, create synonym, create view, alter session to spacewalk; grant unlimited tablespace to spacewalk; alter user spacewalk default tablespace spacewalk; 4) Spacewalk installation and configuration Spacewalk server requires an Oracle Linux 6 x86-64 system. Clients can be Oracle Linux 5 or 6, both 32- and 64bit. The server is only supported on OL6/64bit. The easiest way to get started is to do a 'Minimal' install of Oracle Linux on a server and configure the yum repository to include the spacewalk repo from public-yum. Once you have a system with a minimal install, modify your yum repo to include the spacewalk repo. Example : edit /etc/yum.repos.d/public-yum-ol.repo and add the following lines at the end of the file : [spacewalk] name=spacewalk baseurl=http://public-yum.oracle.com/repo/OracleLinux/OL6/spacewalk20/server/$basearch/ gpgkey=http://public-yum.oracle.com/RPM-GPG-KEY-oracle-ol6 gpgcheck=1 enabled=1 Install the following pre-requisite packages on your spacewalk server : oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-basic-11.2.0.3.0-1.x86_64 rpm -ivh oracle-instantclient11.2-sqlplus-11.2.0.3.0-1.x86_64 The above RPMs can be found on the Oracle Technology Network website : http://www.oracle.com/technetwork/topics/linuxx86-64soft-092277.html As the root user, configure the library path to include the Oracle Instant Client libraries : cd /etc/ld.so.conf.d echo /usr/lib/oracle/11.2/client64/lib oracle-instantclient11.2.conf ldconfig Install spacewalk : # yum install spacewalk-oracle The above yum command should download and install all required packages to run spacewalk on your local server. | NOTE : if you did a full, desktop or workstation installation, | you have to remove the JTA package | BEFORE installing spacewalk-oracle (rpm -e --nodeps jta) Once the installation completes, simply run the spacewalk configuration tool and you are all set. (make sure to run the command with the 2 arguments) spacewalk-setup --disconnected --external-db Answer the questions during the setup, ensure you provide the current database user (example : spacewalk) and password (example : spacewalk) and database server hostname (the standard hostname of the server on which you have deployed the Oracle database) At the end of the setup script, your spacewalk server should be fully configured and you can log into the web portal. Use your favorite browser to connect to the website : http://[spacewalkserverhostname] The very first action will be to create the main admin account.

  Read the article

• I see no LOBs!

  - by Paul White

  Is it possible to see LOB (large object) logical reads from STATISTICS IO output on a table with no LOB columns? I was asked this question today by someone who had spent a good fraction of their afternoon trying to work out why this was occurring – even going so far as to re-run DBCC CHECKDB to see if any corruption had taken place.  The table in question wasn’t particularly pretty – it had grown somewhat organically over time, with new columns being added every so often as the need arose.  Nevertheless, it remained a simple structure with no LOB columns – no TEXT or IMAGE, no XML, no MAX types – nothing aside from ordinary INT, MONEY, VARCHAR, and DATETIME types.  To add to the air of mystery, not every query that ran against the table would report LOB logical reads – just sometimes – but when it did, the query often took much longer to execute. Ok, enough of the pre-amble.  I can’t reproduce the exact structure here, but the following script creates a table that will serve to demonstrate the effect: IF OBJECT_ID(N'dbo.Test', N'U') IS NOT NULL DROP TABLE dbo.Test GO CREATE TABLE dbo.Test ( row_id NUMERIC IDENTITY NOT NULL,   col01 NVARCHAR(450) NOT NULL, col02 NVARCHAR(450) NOT NULL, col03 NVARCHAR(450) NOT NULL, col04 NVARCHAR(450) NOT NULL, col05 NVARCHAR(450) NOT NULL, col06 NVARCHAR(450) NOT NULL, col07 NVARCHAR(450) NOT NULL, col08 NVARCHAR(450) NOT NULL, col09 NVARCHAR(450) NOT NULL, col10 NVARCHAR(450) NOT NULL, CONSTRAINT [PK dbo.Test row_id] PRIMARY KEY CLUSTERED (row_id) ) ; The next script loads the ten variable-length character columns with one-character strings in the first row, two-character strings in the second row, and so on down to the 450th row: WITH Numbers AS ( -- Generates numbers 1 - 450 inclusive SELECT TOP (450) n = ROW_NUMBER() OVER (ORDER BY (SELECT 0)) FROM master.sys.columns C1, master.sys.columns C2, master.sys.columns C3 ORDER BY n ASC ) INSERT dbo.Test WITH (TABLOCKX) SELECT REPLICATE(N'A', N.n), REPLICATE(N'B', N.n), REPLICATE(N'C', N.n), REPLICATE(N'D', N.n), REPLICATE(N'E', N.n), REPLICATE(N'F', N.n), REPLICATE(N'G', N.n), REPLICATE(N'H', N.n), REPLICATE(N'I', N.n), REPLICATE(N'J', N.n) FROM Numbers AS N ORDER BY N.n ASC ; Once those two scripts have run, the table contains 450 rows and 10 columns of data like this: Most of the time, when we query data from this table, we don’t see any LOB logical reads, for example: -- Find the maximum length of the data in -- column 5 for a range of rows SELECT result = MAX(DATALENGTH(T.col05)) FROM dbo.Test AS T WHERE row_id BETWEEN 50 AND 100 ; But with a different query… -- Read all the data in column 1 SELECT result = MAX(DATALENGTH(T.col01)) FROM dbo.Test AS T ; …suddenly we have 49 LOB logical reads, as well as the ‘normal’ logical reads we would expect. The Explanation If we had tried to create this table in SQL Server 2000, we would have received a warning message to say that future INSERT or UPDATE operations on the table might fail if the resulting row exceeded the in-row storage limit of 8060 bytes.  If we needed to store more data than would fit in an 8060 byte row (including internal overhead) we had to use a LOB column – TEXT, NTEXT, or IMAGE.  These special data types store the large data values in a separate structure, with just a small pointer left in the original row. Row Overflow SQL Server 2005 introduced a feature called row overflow, which allows one or more variable-length columns in a row to move to off-row storage if the data in a particular row would otherwise exceed 8060 bytes.  You no longer receive a warning when creating (or altering) a table that might need more than 8060 bytes of in-row storage; if SQL Server finds that it can no longer fit a variable-length column in a particular row, it will silently move one or more of these columns off the row into a separate allocation unit. Only variable-length columns can be moved in this way (for example the (N)VARCHAR, VARBINARY, and SQL_VARIANT types).  Fixed-length columns (like INTEGER and DATETIME for example) never move into ‘row overflow’ storage.  The decision to move a column off-row is done on a row-by-row basis – so data in a particular column might be stored in-row for some table records, and off-row for others. In general, if SQL Server finds that it needs to move a column into row-overflow storage, it moves the largest variable-length column record for that row.  Note that in the case of an UPDATE statement that results in the 8060 byte limit being exceeded, it might not be the column that grew that is moved! Sneaky LOBs Anyway, that’s all very interesting but I don’t want to get too carried away with the intricacies of row-overflow storage internals.  The point is that it is now possible to define a table with non-LOB columns that will silently exceed the old row-size limit and result in ordinary variable-length columns being moved to off-row storage.  Adding new columns to a table, expanding an existing column definition, or simply storing more data in a column than you used to – all these things can result in one or more variable-length columns being moved off the row. Note that row-overflow storage is logically quite different from old-style LOB and new-style MAX data type storage – individual variable-length columns are still limited to 8000 bytes each – you can just have more of them now.  Having said that, the physical mechanisms involved are very similar to full LOB storage – a column moved to row-overflow leaves a 24-byte pointer record in the row, and the ‘separate storage’ I have been talking about is structured very similarly to both old-style LOBs and new-style MAX types.  The disadvantages are also the same: when SQL Server needs a row-overflow column value it needs to follow the in-row pointer a navigate another chain of pages, just like retrieving a traditional LOB. And Finally… In the example script presented above, the rows with row_id values from 402 to 450 inclusive all exceed the total in-row storage limit of 8060 bytes.  A SELECT that references a column in one of those rows that has moved to off-row storage will incur one or more lob logical reads as the storage engine locates the data.  The results on your system might vary slightly depending on your settings, of course; but in my tests only column 1 in rows 402-450 moved off-row.  You might like to play around with the script – updating columns, changing data type lengths, and so on – to see the effect on lob logical reads and which columns get moved when.  You might even see row-overflow columns moving back in-row if they are updated to be smaller (hint: reduce the size of a column entry by at least 1000 bytes if you hope to see this). Be aware that SQL Server will not warn you when it moves ‘ordinary’ variable-length columns into overflow storage, and it can have dramatic effects on performance.  It makes more sense than ever to choose column data types sensibly.  If you make every column a VARCHAR(8000) or NVARCHAR(4000), and someone stores data that results in a row needing more than 8060 bytes, SQL Server might turn some of your column data into pseudo-LOBs – all without saying a word. Finally, some people make a distinction between ordinary LOBs (those that can hold up to 2GB of data) and the LOB-like structures created by row-overflow (where columns are still limited to 8000 bytes) by referring to row-overflow LOBs as SLOBs.  I find that quite appealing, but the ‘S’ stands for ‘small’, which makes expanding the whole acronym a little daft-sounding…small large objects anyone? © Paul White 2011 email: [email protected] twitter: @SQL_Kiwi

  Read the article

• Combined Likelihood Models

  - by Lukas Vermeer

  In a series of posts on this blog we have already described a flexible approach to recording events, a technique to create analytical models for reporting, a method that uses the same principles to generate extremely powerful facet based predictions and a waterfall strategy that can be used to blend multiple (possibly facet based) models for increased accuracy. This latest, and also last, addition to this sequence of increasing modeling complexity will illustrate an advanced approach to amalgamate models, taking us to a whole new level of predictive modeling and analytical insights; combination models predicting likelihoods using multiple child models. The method described here is far from trivial. We therefore would not recommend you apply these techniques in an initial implementation of Oracle Real-Time Decisions. In most cases, basic RTD models or the approaches described before will provide more than enough predictive accuracy and analytical insight. The following is intended as an example of how more advanced models could be constructed if implementation results warrant the increased implementation and design effort. Keep implemented statistics simple! Combining likelihoods Because facet based predictions are based on metadata attributes of the choices selected, it is possible to generate such predictions for more than one attribute of a choice. We can predict the likelihood of acceptance for a particular product based on the product category (e.g. ‘toys’), as well as based on the color of the product (e.g. ‘pink’). Of course, these two predictions may be completely different (the customer may well prefer toys, but dislike pink products) and we will have to somehow combine these two separate predictions to determine an overall likelihood of acceptance for the choice. Perhaps the simplest way to combine multiple predicted likelihoods into one is to calculate the average (or perhaps maximum or minimum) likelihood. However, this would completely forgo the fact that some facets may have a far more pronounced effect on the overall likelihood than others (e.g. customers may consider the product category more important than its color). We could opt for calculating some sort of weighted average, but this would require us to specify up front the relative importance of the different facets involved. This approach would also be unresponsive to changing consumer behavior in these preferences (e.g. product price bracket may become more important to consumers as a result of economic shifts). Preferably, we would want Oracle Real-Time Decisions to learn, act upon and tell us about, the correlations between the different facet models and the overall likelihood of acceptance. This additional level of predictive modeling, where a single supermodel (no pun intended) combines the output of several (facet based) models into a single prediction, is what we call a combined likelihood model. Facet Based Scores As an example, we have implemented three different facet based models (as described earlier) in a simple RTD inline service. These models will allow us to generate predictions for likelihood of acceptance for each product based on three different metadata fields: Category, Price Bracket and Product Color. We will use an Analytical Scores entity to store these different scores so we can easily pass them between different functions. A simple function, creatively named Compute Analytical Scores, will compute for each choice the different facet scores and return an Analytical Scores entity that is stored on the choice itself. For each score, a choice attribute referring to this entity is also added to be returned to the client to facilitate testing. One Offer To Predict Them All In order to combine the different facet based predictions into one single likelihood for each product, we will need a supermodel which can predict the likelihood of acceptance, based on the outcomes of the facet models. This model will not need to consider any of the attributes of the session, because they are already represented in the outcomes of the underlying facet models. For the same reason, the supermodel will not need to learn separately for each product, because the specific combination of facets for this product are also already represented in the output of the underlying models. In other words, instead of learning how session attributes influence acceptance of a particular product, we will learn how the outcomes of facet based models for a particular product influence acceptance at a higher level. We will therefore be using a single All Offers choice to represent all offers in our combined likelihood predictions. This choice has no attribute values configured, no scores and not a single eligibility rule; nor is it ever intended to be returned to a client. The All Offers choice is to be used exclusively by the Combined Likelihood Acceptance model to predict the likelihood of acceptance for all choices; based solely on the output of the facet based models defined earlier. The Switcheroo In Oracle Real-Time Decisions, models can only learn based on attributes stored on the session. Therefore, just before generating a combined prediction for a given choice, we will temporarily copy the facet based scores—stored on the choice earlier as an Analytical Scores entity—to the session. The code for the Predict Combined Likelihood Event function is outlined below. // set session attribute to contain facet based scores. // (this is the only input for the combined model) session().setAnalyticalScores(choice.getAnalyticalScores); // predict likelihood of acceptance for All Offers choice. CombinedLikelihoodChoice c = CombinedLikelihood.getChoice("AllOffers"); Double la = CombinedLikelihoodAcceptance.getChoiceEventLikelihoods(c, "Accepted"); // clear session attribute of facet based scores. session().setAnalyticalScores(null); // return likelihood. return la; This sleight of hand will allow the Combined Likelihood Acceptance model to predict the likelihood of acceptance for the All Offers choice using these choice specific scores. After the prediction is made, we will clear the Analytical Scores session attribute to ensure it does not pollute any of the other (facet) models. To guarantee our combined likelihood model will learn based on the facet based scores—and is not distracted by the other session attributes—we will configure the model to exclude any other inputs, save for the instance of the Analytical Scores session attribute, on the model attributes tab. Recording Events In order for the combined likelihood model to learn correctly, we must ensure that the Analytical Scores session attribute is set correctly at the moment RTD records any events related to a particular choice. We apply essentially the same switching technique as before in a Record Combined Likelihood Event function. // set session attribute to contain facet based scores // (this is the only input for the combined model). session().setAnalyticalScores(choice.getAnalyticalScores); // record input event against All Offers choice. CombinedLikelihood.getChoice("AllOffers").recordEvent(event); // force learn at this moment using the Internal Dock entry point. Application.getPredictor().learn(InternalLearn.modelArray, session(), session(), Application.currentTimeMillis()); // clear session attribute of facet based scores. session().setAnalyticalScores(null); In this example, Internal Learn is a special informant configured as the learn location for the combined likelihood model. The informant itself has no particular configuration and does nothing in itself; it is used only to force the model to learn at the exact instant we have set the Analytical Scores session attribute to the correct values. Reporting Results After running a few thousand (artificially skewed) simulated sessions on our ILS, the Decision Center reporting shows some interesting results. In this case, these results reflect perfectly the bias we ourselves had introduced in our tests. In practice, we would obviously use a wider range of customer attributes and expect to see some more unexpected outcomes. The facetted model for categories has clearly picked up on the that fact our simulated youngsters have little interest in purchasing the one red-hot vehicle our ILS had on offer. Also, it would seem that customer age is an excellent predictor for the acceptance of pink products. Looking at the key drivers for the All Offers choice we can see the relative importance of the different facets to the prediction of overall likelihood. The comparative importance of the category facet for overall prediction might, in part, be explained by the clear preference of younger customers for toys over other product types; as evident from the report on the predictiveness of customer age for offer category acceptance. Conclusion Oracle Real-Time Decisions' flexible decisioning framework allows for the construction of exceptionally elaborate prediction models that facilitate powerful targeting, but nonetheless provide insightful reporting. Although few customers will have a direct need for such a sophisticated solution architecture, it is encouraging to see that this lies within the realm of the possible with RTD; and this with limited configuration and customization required. There are obviously numerous other ways in which the predictive and reporting capabilities of Oracle Real-Time Decisions can be expanded upon to tailor to individual customers needs. We will not be able to elaborate on them all on this blog; and finding the right approach for any given problem is often more difficult than implementing the solution. Nevertheless, we hope that these last few posts have given you enough of an understanding of the power of the RTD framework and its models; so that you can take some of these ideas and improve upon your own strategy. As always, if you have any questions about the above—or any Oracle Real-Time Decisions design challenges you might face—please do not hesitate to contact us; via the comments below, social media or directly at Oracle. We are completely multi-channel and would be more than glad to help. :-)

  Read the article

• SQL Server Table Polling by Multiple Subscribers

  - by Daniel Hester

  Background Designing Stored Procedures that are safe for multiple subscribers (to call simultaneously) can be challenging.  For example let’s say that you want multiple worker processes to poll a shared work queue that’s encapsulated as a SQL Table. This is a common scenario and through experience you’ll find that you want to use Table Hints to prevent unwanted locking when performing simultaneous queries on the same table. There are three table hints to consider: NOLOCK, READPAST and UPDLOCK. Both NOLOCK and READPAST table hints allow you to SELECT from a table without placing a LOCK on that table. However, SELECTs with the READPAST hint will ignore any records that are locked due to being updated/inserted (or otherwise “dirty”), whereas a SELECT with NOLOCK ignores all locks including dirty reads. For the initial update of the flag (that marks the record as available for subscription) I don’t use the NOLOCK Table Hint because I want to be sensitive to the “active” records in the table and I want to exclude them.  I use an Update Lock (UPDLOCK) in conjunction with a WHERE clause that uses a sub-select with a READPAST Table Hint in order to explicitly lock the records I’m updating (UPDLOCK) but not place a lock on the table when selecting the records that I’m going to update (READPAST). UPDATES should be allowed to lock the rows affected because we’re probably changing a flag on a record so that it is not included in a SELECT from another subscriber. On the UPDATE statement we should explicitly use the UPDLOCK to guard against lock escalation. A SELECT to check for the next record(s) to process can result in a shared read lock being held by more than one subscriber polling the shared work queue (SQL table). It is expected that more than one worker process (or server) might try to process the same new record(s) at the same time. When each process then tries to obtain the update lock, none of them can because another process has a shared read lock in place. Thus without the UPDLOCK hint the result would be a lock escalation deadlock; however with the UPDLOCK hint this condition is mitigated against. Note that using the READPAST table hint requires that you also set the ISOLATION LEVEL of the transaction to be READ COMMITTED (rather than the default of SERIALIZABLE). Guidance In the Stored Procedure that returns records to the multiple subscribers: Perform the UPDATE first. Change the flag that makes the record available to subscribers.  Additionally, you may want to update a LastUpdated datetime field in order to be able to check for records that “got stuck” in an intermediate state or for other auditing purposes. In the UPDATE statement use the (UPDLOCK) Table Hint on the UPDATE statement to prevent lock escalation. In the UPDATE statement also use a WHERE Clause that uses a sub-select with a (READPAST) Table Hint to select the records that you’re going to update. In the UPDATE statement use the OUTPUT clause in conjunction with a Temporary Table to isolate the record(s) that you’ve just updated and intend to return to the subscriber. This is the fastest way to update the record(s) and to get the records’ identifiers within the same operation. Finally do a set-based SELECT on the main Table (using the Temporary Table to identify the records in the set) with either a READPAST or NOLOCK table hint.  Use NOLOCK if there are other processes (besides the multiple subscribers) that might be changing the data that you want to return to the multiple subscribers; or use READPAST if you're sure there are no other processes (besides the multiple subscribers) that might be updating column data in the table for other purposes (e.g. changes to a person’s last name).  NOLOCK is generally the better fit in this part of the scenario. See the following as an example: CREATE PROCEDURE [dbo].[usp_NewCustomersSelect] AS BEGIN -- OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON -- DECLARE TEMP TABLE -- Note that this example uses CustomerId as an identifier; -- you could just use the Identity column Id if that’s all you need. DECLARE @CustomersTempTable TABLE ( CustomerId NVARCHAR(255) ) -- PERFORM UPDATE FIRST -- [Customers] is the name of the table -- [Id] is the Identity Column on the table -- [CustomerId] is the business document key used to identify the -- record globally, i.e. in other systems or across SQL tables -- [Status] is INT or BIT field (if the status is a binary state) -- [LastUpdated] is a datetime field used to record the time of the -- last update UPDATE [Customers] WITH (UPDLOCK) SET [Status] = 1, [LastUpdated] = GETDATE() OUTPUT [INSERTED].[CustomerId] INTO @CustomersTempTable WHERE ([Id] = (SELECT TOP 100 [Id] FROM [Customers] WITH (READPAST) WHERE ([Status] = 0) ORDER BY [Id] ASC)) -- PERFORM SELECT FROM ENTITY TABLE SELECT [C].[CustomerId], [C].[FirstName], [C].[LastName], [C].[Address1], [C].[Address2], [C].[City], [C].[State], [C].[Zip], [C].[ShippingMethod], [C].[Id] FROM [Customers] AS [C] WITH (NOLOCK), @CustomersTempTable AS [TEMP] WHERE ([C].[CustomerId] = [TEMP].[CustomerId]) END In a system that has been designed to have multiple status values for records that need to be processed in the Work Queue it is necessary to have a “Watch Dog” process by which “stale” records in intermediate states (such as “In Progress”) are detected, i.e. a [Status] of 0 = New or Unprocessed; a [Status] of 1 = In Progress; a [Status] of 2 = Processed; etc.. Thus, if you have a business rule that states that the application should only process new records if all of the old records have been processed successfully (or marked as an error), then it will be necessary to build a monitoring process to detect stalled or stale records in the Work Queue, hence the use of the LastUpdated column in the example above. The Status field along with the LastUpdated field can be used as the criteria to detect stalled / stale records. It is possible to put this watchdog logic into the stored procedure above, but I would recommend making it a separate monitoring function. In writing the stored procedure that checks for stale records I would recommend using the same kind of lock semantics as suggested above. The example below looks for records that have been in the “In Progress” state ([Status] = 1) for greater than 60 seconds: CREATE PROCEDURE [dbo].[usp_NewCustomersWatchDog] AS BEGIN -- TO OVERRIDE THE DEFAULT ISOLATION LEVEL SET TRANSACTION ISOLATION LEVEL READ COMMITTED -- SET NOCOUNT ON SET NOCOUNT ON DECLARE @MaxWait int; SET @MaxWait = 60 IF EXISTS (SELECT 1 FROM [dbo].[Customers] WITH (READPAST) WHERE ([Status] = 1) AND (DATEDIFF(s, [LastUpdated], GETDATE()) > @MaxWait)) BEGIN SELECT 1 AS [IsWatchDogError] END ELSE BEGIN SELECT 0 AS [IsWatchDogError] END END Downloads The zip file below contains two SQL scripts: one to create a sample database with the above stored procedures and one to populate the sample database with 10,000 sample records.  I am very grateful to Red-Gate software for their excellent SQL Data Generator tool which enabled me to create these sample records in no time at all. References http://msdn.microsoft.com/en-us/library/ms187373.aspx http://www.techrepublic.com/article/using-nolock-and-readpast-table-hints-in-sql-server/6185492 http://geekswithblogs.net/gwiele/archive/2004/11/25/15974.aspx http://grounding.co.za/blogs/romiko/archive/2009/03/09/biztalk-sql-receive-location-deadlocks-dirty-reads-and-isolation-levels.aspx

  Read the article

< Previous Page | 838 839 840 841 842 843 844 845 846 847 848 849  | Next Page >