Search Results

Search found 2299 results on 92 pages for 'alec smart'.

Page 85/92 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • WNDR3700 Router + Cisco SG200-08 + LACP + Dual Uplink

    - by kobaltz
    Background I have a storage server that has several virtual machine images stored on them. I would store them locally, but I have limited space on my desktop (using SSD storage). I would like to increase the bandwidth between the desktop and the storage server by using two NICs on each computer. My original configuration allowed about 55MBps between the desktop and storage server. This storage server also has several TBs of documents, pictures, movies, vms, and ISO/programs. The storage server has 8 1.5TB hard drives in a RAID 10 configuration with a hardware RAID controller. The benchmarks on the RAID 10 are about 300MBps. Configuration In short, I am trying to bridge my switch and router. The switch is a small 8 port Cisco smart switch that supports 802.3ad LACP. I have two computers plugged into the switch, each with 2 Intel Gigabit NICs. The first computer is a Windows 7 machine that has the Intel ANS software installed. I have LACP configured with the computer and now show 3 NICs (2 Physical + 1 TEAM Virtual @ 2Gbps). It looks like this computer is configured correctly. I trunked the two ports that this computer is plugged into with the switch's web interface. The second computer is a homebrew storage box running debian. I also have the bonding enabled on this machine and the switch configured with LACP. Without having the WNDR3700 router in the picture yet, I am able to communicate between the Windows 7 machine and the debian box since they both have static IP addresses. With LACP enabled on both machines I am getting about 106-108MBps speeds. Issue I plug in a network cable from the switch into the router and enable DHCP on the desktop. I saw no need to have a static address on the desktop. My transfer rates are still from 106MBps-108MBps. While this is still a boost, I am trying to figure out how to get about 140-180MBps. I am thinking that I need to increase the bandwidth from the router to the switch. My switch allows 4 groups for port trunking. I plugged in a second network cable from the router to the switch. My question is, what is the proper way to fix this issue. Should I port trunk the two ports that are going from the switch to the router? Keep in mind that the router is a WNDR3700 and is unsure whether or not it supports LACP. I do have OpenWRT installed on the router, but it still wasn't clear in any documentation that I found if it supported 802.3ad LACP standards. I am also wondering if there needs to be anything changed within the Cisco settings. [Edit] - Corrected some numbers, wasn't really paying attention. It looks like the speeds though at least two NICs are bonded with LACP is still reaching the max bandwidth of one port. Is there a way to configure the switch so that I can increase this bandwidth? Also, on the storage server, I had a couple of extra NICs laying around and threw them on there as well. Another EDIT and More Findings I happened to look at the traffic of each individual NIC and think that I see the problem. I tested with a simple transfer for a 4GB file. I noticed that only one of the NICs was taking the load of the traffic. I then copied the file back to the Storage Server and noticed that the other NIC was sending out the traffic. I have 802.3ad LACP enabled on the two NICs and I see that it gets enabled dynamically on the switch's interface. Should I be using Static Link Aggregation?

    Read the article

  • Windows 7 disk errors after a few hours of runtime

    - by GFK
    I'm having trouble understanding what is going on with my work PC. Whenever I boot it, it runs fine for a while, then starts to randomly show disk errors. The displayed error often contains the message "not enough storage is available to process this command", although depending on the application that fails it can be different. This has happened for weeks now and is getting worse. This is what troubles me: It never seems to impact critical parts of the system (no BSOD, no freeze). Only some applications seem impacted, refusing to function correctly after a while: Outlook 2010 cannot download RSS feeds anymore, Firefox 6 or IE9 cannot download anything bigger than 3MB without failing, Windows Update fails, all msi installers fail, Visual Studio 2010 starts failing in weird manners... It only happens after a while using it (typically 3 hours, but it seems that installing a program or compiling several times makes it shorter) Rebooting solves it (temporarily). The system: The OS is Windows 7 Pro Spanish SP1, 32 bits The system is an HP Compaq 6000 Pro with 4 GB memory (only 3.4GB usable since the system is 32bit), one 500GB hard drive. Installed applications include: Visual Studio 2010, SQL Server 2008 R2, VMWare Workstation 7, Microsoft Security Essentials, Office 2010. Shutting down all related services and processes doesn't seem to change anything. The diagnostics I've run so far: Hard drive : 465GB, 165GB free Process Explorer : physical and virtual memory seem ok (pagefile is 5.3GB, physical memory usage 70%, system commit 39%) Windows Memory diagnostic tool: OK CHKDSK returned: 488282111 KB total disk space. 281668248 KB in 265779 files. 150188 KB in 62949 indexes. 0 KB in bad sectors. 571755 KB in use by the system. The log file has occupied 65536 kilobytes. 205891920 KB available on disk. For non-spanish speakers, that means all ok. SMART diagnostic tools (DiskCheckup) report all values normal. temperatures are in the normal range (HWinfo). The event viewer doesn't seem to contain any significant message. ran CCleaner 3, without any noticeable effect. I was thinking about some file number limit (between Visual Studio projects and other applications, there are around 300.000 files on the hard drive), but I couldn't find any. It's possible there is something related with the use of the temporary folders (it's the only explanation I have for why applications fail but Windows doesn't), but I cannot confirm that. Only thing I cannot find out is if chkdsk reporting 65MB for the log is normal. It seems since Vista it always reports this. Any other cleaning/diagnostic tool you might know of? Edit: I ran several other tools since I first published the question: Seagate SeaTools (the HD manufacturer's analysis tool): complete test run OK. Intel Rapid 10.1 (the HD controller manufacturer's troubleshooting tool): the HD's ok. Microsoft Desktop Heap Monitor: Desktop Heap Information Monitor Tool (Version 8.1.2925.0) Copyright (c) Microsoft Corporation. All rights reserved. Session ID: 1 Total Desktop: ( 46464 KB - 11 desktops) WinStation\Desktop Heap Size(KB) Used Rate(%) WinSta0\Winlogon (s1) 128 3.6 WinSta0\Disconnect (s1) 64 3.8 WinSta0\Default (s1) 20480 3.0 msswindowstation\mssrestricteddesk (s0) 1024 0.2 __X78B95_89_IW__A8D9S1_42_ID (s0) 1024 0.2 Service-0x0-3e5$\Default (s0) 1024 0.6 Service-0x0-3e4$\Default (s0) 1024 0.3 Service-0x0-3e7$\Default (s0) 1024 2.1 WinSta0\Winlogon (s0) 128 1.9 WinSta0\Disconnect (s0) 64 3.8 WinSta0\Default (s0) 20480 0.0 All ok, desktop heap usage < 5% Edit 2: I tried totally resetting my account by creating a new one, logging under this new one and delete the first one (local rights and files), then logging back with this deleted account (it is a domain account). No luck. Also, I found out often the error is "not enough storage is available to process this command". Searching on the internet, I found an old troubleshooting tip (setting a registry key to raise the IRP stack limit, whatever it is) which did not change anything.

    Read the article

  • Hard drive after PCB swap strange stuff

    - by ramyy
    I’ve done a PCB swap to my HDD. The HDD model is: WD6400AAKS-00A7B2. The original PCB PN matches the new one (first three letter groups), though the cache mismatches (16MB original, 8MB new). The Hardware store that made the swap told me it was hard to do the swap, they have done firmware adaptation. I can see that this firmware version does not match the original, (01.03B01 original, 05.04E05 new). Still I can see that the serial number and model of the drive is correct, the hard drive appeared normal in the BIOS, all the partitions show and everything appears normal. I have encountered three things though, I have left the drive non operated for 2-3 weeks after the swap to avoid corrupting the data or anything else the new PCB might cause, until I buy a new drive and backup the data. I got a drive, and when I powered the old drive manually (I have a laptop, I use a normal desktop power supply and a USB/SATA connector), I heard the motor start and I could hear ticking as if the motor’s somehow struggling to start, and then the motor sound starts again then the ticking, and so on.. I tried powering again it happened again. The third time it started normally and I could see everything normally. I took the chance and copied all the data over to the new drive. When I was done, I powered off the drive (after more than 25 hours of continuous operation), tried to power it up again and it did so normally, and so are the times I powered it up later; but I got very suspicious now. What could be the problem here? And what happened new, it used to power normally after the swap directly? The second thing that happened is that I found size differences with some files; some include movies, songs, (.iso) files for games, and programs. I could find the size is the same, but size on disk is a little more on the new drive for these files. . I’ve tried some of those files (with size differences) they worked fine. They are not too much but still make you suspicious of the integrity of the data copied; one cannot try if all files are working for about (580 GB) worth of data. I tried copying these files on the same partition they exist of the old drive; they are the same in size as when copied to the new drive (allocation unit size not the issue). I took an image of a partition (sector by sector including empty ones) and when I explore it, these file sizes are equal to the original (old drive); I copy them anywhere else their size on disk, increases, i.e becomes equal to the ones I copy from the old drive itself anywhere. Why the size difference and can one trust the integrity of the data?? The third thing is that when I connect my new external USB HDD, the partitions of the old HDD unmount and then mount again. Connected are: (USB mouse + Old HDD) then external HDD. Why that happens?? Considering the following: I compared the SMART reports from after the swap directly and after the copying, no error readings or reallocated sectors where reported. Here they are: http://www.image-share.com/ijpg-1939-219.html I later ran both WD data life guard tests and they came out passed. I’m worried for this drive since I must be sure the data is fine and safe on the new one, and I will consider it backup for the new one, since you can’t trust anything anymore. I hope you can forgive me for the length of the post, but couldn’t ignore any of the details, this hard drive contains very important data to me and I have to deal with the situation with great care.

    Read the article

  • The best dvd ripper software in 2014 review

    - by user328170
    The top 3 DVD Ripping Tools in 2014 Nowadays everyone may have several smart mobile devices, such as iphone, ipad air, ipad mini ,Samsung Galaxy and Sony Xperia. If you want to take your movies with your mobile devices, or sometimes just want to backup those classic physical discs on your notebook or workstation with high quality resolutions, you need a fast and stable software to rip them and convert them to the format you like. Fortunately, there are plenty of great software products designed to make the process easy and transform DVD to the files that are playable on any mobile device you choose. We have done a full review on dozens of products. Here are five of the best, based on our review. We test the software from its ripping speed, friendly use guide , reliability and ripping capability. The top one is still Winx DVD Ripper platinum. We've test its 6.1 version 2 years ago for its ability to quickly and easily rip DVDs and Blu-ray discs to high quality MKV files with a single click. It gave us deep impression in the test. This time we test it’s lastest 7.3.5 version. Besides easy use and speed, we test its capability to decrypt all kinds of discs with different protect method, for example, Disney X-project DRM , Sony ArccOS, RCE and region code. The result shows that winx dvd ripper platinum still maintain its advantages in all the area. Winx dvd ripper platinum is a more focused on DVD ripping software with the basic duty to rip and convert DVD. The color of UI is a modern technical sense. All the main functions are shown obviously while others specials are hidden for advanced users, making it more clear and convenient to make option. There are two company weisoft limited and Digiarty who can provide the software. Weisoft limited focus on USA, UK and Australia market. Digiarty focus on others. ripping speed ????? friendly use guide ????? reliability ????? ripping capability ????? The second one DVDFab DVDFab is also very robust during ripping dics. It can also decrypt most of the dics in the market. The shortage it still friendly use and speed. We'd note that the app is frequently updated to cut through the copy protection on even the latest DVDs and Blu-ray discs . The app is shareware, meaning most features are free, including decrypting and ripping to your hard drive. Many of you note that you use another app for compression and authoring, but many of you say they hey, storage is cheap, and the rips from DVDFab are easy, one-click, and work. ripping speed ??? friendly use guide ???? reliability ????? ripping capability ????? The Third one is Handbrake Handbrake is our favorite video encoder for a reason: it's simple, easy to use, easy to install, and offers a lots of options to get the high quality file as a result. If you're scared by them, you don't even have to use them—the app will compensate for you and pick some settings it thinks you'll like based on your destination device. So many of you like Handbrake that many of you use it in conjunction with another app (like VLC, which makes ripping easy)—you'll let another app do the rip and crack the DRM on your discs, and then process the file through Handbrake for encoding. The app is fast, can make the most of multi-core processors to speed up the process, and is completely open source. ripping speed ??? friendly use guide ???? reliability ???? ripping capability ????

    Read the article

  • Week in Geek: FBI Back Door in OpenBSD Edition

    - by Asian Angel
    This week we learned how to migrate bookmarks from Delicious to Diigo, fix annoying arrows, play old-school DOS games, schedule smart computer shutdowns, use breaks in Microsoft Word to better format documents, check the condition of hard-disks using Linux disk utilities, & what the Linux fstab is and how it works. Photo by Jameson42. Random Geek Links Another week with extra news link goodness to help keep you up to date. Photo by justmakeit. Report of FBI back door roils OpenBSD community Allegations that the FBI surreptitiously placed a back door into the OpenBSD operating system have alarmed the computer security community, prompting calls for an audit of the source code and claims that the charges must be a hoax. Fortinet: Job outlook improving for cybercrooks In an ironic twist in the job market, more positions will open up for developers who can write customized malware packers, people who can break CAPTCHA codes, and distributors who can spread malicious code, according to Fortinet. Enisa: Malware for smartphones is a ’serious risk’ Businesses and consumers are at risk of data breaches through smartphone use, according to the European Network and Information Security Agency. The trick with the f: Google and Microsoft web sites distribute malware Last week, Google’s DoubleClick advertising platform and Microsoft’s rad.msn.com online ad network briefly distributed malware to other web sites in the form of advertising banners. New scam tactic: Fake disk defraggers It would appear that scammers are trying out new programs to see which might best confuse potential victims and evade detection by legitimate antivirus software. Microsoft closes IE and Stuxnet holes As previously announced, Microsoft has released 17 security updates to close 40 security holes. All four Windows holes so far disclosed in connection with Stuxnet have now been closed. Microsoft Offers H.264 Support to Firefox on Windows via Add-On The new HTML5 Extension for Windows Media Player Firefox Plug-in add-on from Microsoft offers users that are running Firefox on Windows 7 H.264 support for HTML5 video playback. Google proclaims Chrome business-ready Google has announced that Chrome is ready for corporate use. Microsoft Tells Exchange Customers to Think Twice Before Opting for Google Message Continuity This week, Microsoft is telling companies still running Exchange 2010’s precursors that they should carefully consider the implications of embracing Google Message Continuity. Who Google has in mind for its Chrome OS users Steven Vaughan-Nichols explains why he feels that Chrome OS will be ideal for either office-workers or people who need a computer, but do not know the first thing about how to use one safely. Oracle takes office suite to the cloud Oracle has introduced Cloud Office 1.0, a cloud-based version of its office suite, which is aimed at web and mobile users. Mozilla pays premiums for reports of vulnerabilities The Mozilla Foundation has followed Google’s example by expanding its rewards program for reports of vulnerabilities in its Web applications. Who bought those 882 Novell patents? Not just Microsoft The mysterious CPTN Holdings — the organization that bought the 882 Novell patents as part of the terms of the Attachmate acquisition of Novell – has been unmasked (Microsoft, Apple, EMC and Oracle). Appeals court: Feds need warrants for e-mail Police must obtain search warrants before perusing Internet users’ e-mail records, a federal appeals court ruled today in a landmark decision that struck down part of a 1986 law allowing warrantless access. Geek Video of the Week What happens when someone plays a wicked prank by shoveling crazy snow paths that lead to dead ends or turn back on themselves? Watch to find out! Photo by CollegeHumor. Janitor Snow Shoveling Prank Random TinyHacker Links The Oatmeal on Cat vs Internet What lengths will our poor neglected kitty hero have to go to in order to get some attention? Guide On Using JoliCloud With Windows JoliCloud is a nifty operating system that’s made for people who need a light-weight OS that’s mostly cloud based. Check this guide on using it with Windows. Use Cameyo to Easily Create Portable Programs Here’s a nifty tool to make portable apps out of programs in Windows. Check out the guide to do it. Better Family Tech Support A nice new site by Google to help members of family understand how computers work. Track Your Stolen Mobile Phone With F-Secure A useful anti-theft tool for your mobile phone. Super User Questions Another week with great answers to popular questions from Super User. What Chrome password manager fits my requirements? What’s the best way to be able to reimage windows computers? Could you suggest feature-rich disk-based personal backup program for linux (and I’ve seen a few)? What is IPv6 and why should I care? Is there any way to find out what programs are trying to connect to Internet on windows? How-To Geek Weekly Article Recap Here are our hottest articles full of geeky goodness from this past week at HTG. 20 OS X Keyboard Shortcuts You Might Not Know Microsoft Security Essentials 2.0 Kills Viruses Dead. Download It Now. Is Your Desktop Printer More Expensive Than Printing Services? Ask the Readers: Would You Be Willing to Give Windows Up and Use a Different O.S.? The Twelve Days of Geekmas One Year Ago on How-To Geek Enjoy reading through our latest batch of retro-geek goodness from one year ago. Macrium Reflect is a Free and Easy To Use Backup Utility How To Turn a Physical Computer Into A Virtual Machine with Disk2vhd How To Restore Windows 7 from a System Image How To Manage Hard Drive Space Used by Windows 7 Backup and Restore How To Manage Hibernate Mode in Windows 7 The Geek Note That is all we have for you this week, so see you back here again after the holidays! Got a great tip? Send it in to us at [email protected]. Photo by mitjamavsar. Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Deathwing the Destroyer – WoW Cataclysm Dragon Wallpaper Drag2Up Lets You Drag and Drop Files to the Web With Ease The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser

    Read the article

  • LINQ to SQL and missing Many to Many EntityRefs

    - by Rick Strahl
    Ran into an odd behavior today with a many to many mapping of one of my tables in LINQ to SQL. Many to many mappings aren’t transparent in LINQ to SQL and it maps the link table the same way the SQL schema has it when creating one. In other words LINQ to SQL isn’t smart about many to many mappings and just treats it like the 3 underlying tables that make up the many to many relationship. Iain Galloway has a nice blog entry about Many to Many relationships in LINQ to SQL. I can live with that – it’s not really difficult to deal with this arrangement once mapped, especially when reading data back. Writing is a little more difficult as you do have to insert into two entities for new records, but nothing that can’t be handled in a small business object method with a few lines of code. When I created a database I’ve been using to experiment around with various different OR/Ms recently I found that for some reason LINQ to SQL was completely failing to map even to the linking table. As it turns out there’s a good reason why it fails, can you spot it below? (read on :-}) Here is the original database layout: There’s an items table, a category table and a link table that holds only the foreign keys to the Items and Category tables for a typical M->M relationship. When these three tables are imported into the model the *look* correct – I do get the relationships added (after modifying the entity names to strip the prefix): The relationship looks perfectly fine, both in the designer as well as in the XML document: <Table Name="dbo.wws_Item_Categories" Member="ItemCategories"> <Type Name="ItemCategory"> <Column Name="ItemId" Type="System.Guid" DbType="uniqueidentifier NOT NULL" CanBeNull="false" /> <Column Name="CategoryId" Type="System.Guid" DbType="uniqueidentifier NOT NULL" CanBeNull="false" /> <Association Name="ItemCategory_Category" Member="Categories" ThisKey="CategoryId" OtherKey="Id" Type="Category" /> <Association Name="Item_ItemCategory" Member="Item" ThisKey="ItemId" OtherKey="Id" Type="Item" IsForeignKey="true" /> </Type> </Table> <Table Name="dbo.wws_Categories" Member="Categories"> <Type Name="Category"> <Column Name="Id" Type="System.Guid" DbType="UniqueIdentifier NOT NULL" IsPrimaryKey="true" IsDbGenerated="true" CanBeNull="false" /> <Column Name="ParentId" Type="System.Guid" DbType="UniqueIdentifier" CanBeNull="true" /> <Column Name="CategoryName" Type="System.String" DbType="NVarChar(150)" CanBeNull="true" /> <Column Name="CategoryDescription" Type="System.String" DbType="NVarChar(MAX)" CanBeNull="true" /> <Column Name="tstamp" AccessModifier="Internal" Type="System.Data.Linq.Binary" DbType="rowversion" CanBeNull="true" IsVersion="true" /> <Association Name="ItemCategory_Category" Member="ItemCategory" ThisKey="Id" OtherKey="CategoryId" Type="ItemCategory" IsForeignKey="true" /> </Type> </Table> However when looking at the code generated these navigation properties (also on Item) are completely missing: [global::System.Data.Linq.Mapping.TableAttribute(Name="dbo.wws_Item_Categories")] [global::System.Runtime.Serialization.DataContractAttribute()] public partial class ItemCategory : Westwind.BusinessFramework.EntityBase { private System.Guid _ItemId; private System.Guid _CategoryId; public ItemCategory() { } [global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_ItemId", DbType="uniqueidentifier NOT NULL")] [global::System.Runtime.Serialization.DataMemberAttribute(Order=1)] public System.Guid ItemId { get { return this._ItemId; } set { if ((this._ItemId != value)) { this._ItemId = value; } } } [global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_CategoryId", DbType="uniqueidentifier NOT NULL")] [global::System.Runtime.Serialization.DataMemberAttribute(Order=2)] public System.Guid CategoryId { get { return this._CategoryId; } set { if ((this._CategoryId != value)) { this._CategoryId = value; } } } } Notice that the Item and Category association properties which should be EntityRef properties are completely missing. They’re there in the model, but the generated code – not so much. So what’s the problem here? The problem – it appears – is that LINQ to SQL requires primary keys on all entities it tracks. In order to support tracking – even of the link table entity – the link table requires a primary key. Real obvious ain’t it, especially since the designer happily lets you import the table and even shows the relationship and implicitly the related properties. Adding an Id field as a Pk to the database and then importing results in this model layout: which properly generates the Item and Category properties into the link entity. It’s ironic that LINQ to SQL *requires* the PK in the middle – the Entity Framework requires that a link table have *only* the two foreign key fields in a table in order to recognize a many to many relation. EF actually handles the M->M relation directly without the intermediate link entity unlike LINQ to SQL. [updated from comments – 12/24/2009] Another approach is to set up both ItemId and CategoryId in the database which shows up in LINQ to SQL like this: This also work in creating the Category and Item fields in the ItemCategory entity. Ultimately this is probably the best approach as it also guarantees uniqueness of the keys and so helps in database integrity. It took me a while to figure out WTF was going on here – lulled by the designer to think that the properties should be when they were not. It’s actually a well documented feature of L2S that each entity in the model requires a Pk but of course that’s easy to miss when the model viewer shows it to you and even the underlying XML model shows the Associations properly. This is one of the issue with L2S of course – you have to play by its rules and once you hit one of those rules there’s no way around them – you’re stuck with what it requires which in this case meant changing the database.© Rick Strahl, West Wind Technologies, 2005-2010Posted in ADO.NET  LINQ  

    Read the article

  • Ajax Control Toolkit and Superexpert

    - by Stephen Walther
    Microsoft has asked my company, Superexpert Consulting, to take ownership of the development and maintenance of the Ajax Control Toolkit moving forward. In this blog entry, I discuss our strategy for improving the Ajax Control Toolkit. Why the Ajax Control Toolkit? The Ajax Control Toolkit is one of the most popular projects on CodePlex. In fact, some have argued that it is among the most successful open-source projects of all time. It consistently receives over 3,500 downloads a day (not weekends -- workdays). A mind-boggling number of developers use the Ajax Control Toolkit in their ASP.NET Web Forms applications. Why does the Ajax Control Toolkit continue to be such a popular project? The Ajax Control Toolkit fills a strong need in the ASP.NET Web Forms world. The Toolkit enables Web Forms developers to build richly interactive JavaScript applications without writing any JavaScript. For example, by taking advantage of the Ajax Control Toolkit, a Web Forms developer can add modal dialogs, popup calendars, and client tabs to a web application simply by dragging web controls onto a page. The Ajax Control Toolkit is not for everyone. If you are comfortable writing JavaScript then I recommend that you investigate using jQuery plugins instead of the Ajax Control Toolkit. However, if you are a Web Forms developer and you don’t want to get your hands dirty writing JavaScript, then the Ajax Control Toolkit is a great solution. The Ajax Control Toolkit is Vast The Ajax Control Toolkit consists of 40 controls. That’s a lot of controls (For the sake of comparison, jQuery UI consists of only 8 controls – those slackers J). Furthermore, developers expect the Ajax Control Toolkit to work on browsers both old and new. For example, people expect the Ajax Control Toolkit to work with Internet Explorer 6 and Internet Explorer 9 and every version of Internet Explorer in between. People also expect the Ajax Control Toolkit to work on the latest versions of Mozilla Firefox, Apple Safari, and Google Chrome. And, people expect the Ajax Control Toolkit to work with different operating systems. Yikes, that is a lot of combinations. The biggest challenge which my company faces in supporting the Ajax Control Toolkit is ensuring that the Ajax Control Toolkit works across all of these different browsers and operating systems. Testing, Testing, Testing Because we wanted to ensure that we could easily test the Ajax Control Toolkit with different browsers, the very first thing that we did was to set up a dedicated testing server. The dedicated server -- named Schizo -- hosts 4 virtual machines so that we can run Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, and Internet Explorer 9 at the same time (We also use the virtual machines to host the latest versions of Firefox, Chrome, Opera, and Safari). The five developers on our team (plus me) can each publish to a separate FTP website on the testing server. That way, we can quickly test how changes to the Ajax Control Toolkit affect different browsers. QUnit Tests for the Ajax Control Toolkit Introducing regressions – introducing new bugs when trying to fix existing bugs – is the concern which prevents me from sleeping well at night. There are so many people using the Ajax Control Toolkit in so many unique scenarios, that it is difficult to make improvements to the Ajax Control Toolkit without introducing regressions. In order to avoid regressions, we decided early on that it was extremely important to build good test coverage for the 40 controls in the Ajax Control Toolkit. We’ve been focusing a lot of energy on building automated JavaScript unit tests which we can use to help us discover regressions. We decided to write the unit tests with the QUnit test framework. We picked QUnit because it is quickly becoming the standard unit testing framework in the JavaScript world. For example, it is the unit testing framework used by the jQuery team, the jQuery UI team, and many jQuery UI plugin developers. We had to make several enhancements to the QUnit framework in order to test the Ajax Control Toolkit. For example, QUnit does not support tests which include postbacks. We modified the QUnit framework so that it works with IFrames so we could perform postbacks in our automated tests. At this point, we have written hundreds of QUnit tests. For example, we have written 135 QUnit tests for the Accordion control. The QUnit tests are included with the Ajax Control Toolkit source code in a project named AjaxControlToolkit.Tests. You can run all of the QUnit tests contained in the project by opening the Default.aspx page. Automating the QUnit Tests across Multiple Browsers Automated tests are useless if no one ever runs them. In order for the QUnit tests to be useful, we needed an easy way to run the tests automatically against a matrix of browsers. We wanted to run the unit tests against Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, Firefox, Chrome, and Safari automatically. Expecting a developer to run QUnit tests against every browser after every check-in is just too much to expect. It takes 20 seconds to run the Accordion QUnit tests. We are testing against 8 browsers. That would require the developer to open 8 browsers and wait for the results after each change in code. Too much work. Therefore, we built a JavaScript Test Server. Our JavaScript Test Server project was inspired by John Resig’s TestSwarm project. The JavaScript Test Server runs our QUnit tests in a swarm of browsers (running on different operating systems) automatically. Here’s how the JavaScript Test Server works: 1. We created an ASP.NET page named RunTest.aspx that constantly polls the JavaScript Test Server for a new set of QUnit tests to run. After the RunTest.aspx page runs the QUnit tests, the RunTest.aspx records the test results back to the JavaScript Test Server. 2. We opened the RunTest.aspx page on instances of Internet Explorer 6, Internet Explorer 7, Internet Explorer 8, Internet Explorer 9, FireFox, Chrome, Opera, Google, and Safari. Now that we have the JavaScript Test Server setup, we can run all of our QUnit tests against all of the browsers which we need to support with a single click of a button. A New Release of the Ajax Control Toolkit Each Month The Ajax Control Toolkit Issue Tracker contains over one thousand five hundred open issues and feature requests. So we have plenty of work on our plates J At CodePlex, anyone can vote for an issue to be fixed. Originally, we planned to fix issues in order of their votes. However, we quickly discovered that this approach was inefficient. Constantly switching back and forth between different controls was too time-consuming. It takes time to re-familiarize yourself with a control. Instead, we decided to focus on two or three controls each month and really focus on fixing the issues with those controls. This way, we can fix sets of related issues and avoid the randomization caused by context switching. Our team works in monthly sprints. We plan to do another release of the Ajax Control Toolkit each and every month. So far, we have competed one release of the Ajax Control Toolkit which was released on April 1, 2011. We plan to release a new version in early May. Conclusion Fortunately, I work with a team of smart developers. We currently have 5 developers working on the Ajax Control Toolkit (not full-time, they are also building two very cool ASP.NET MVC applications). All the developers who work on our team are required to have strong JavaScript, jQuery, and ASP.NET MVC skills. In the interest of being as transparent as possible about our work on the Ajax Control Toolkit, I plan to blog frequently about our team’s ongoing work. In my next blog entry, I plan to write about the two Ajax Control Toolkit controls which are the focus of our work for next release.

    Read the article

  • Security Trimmed Cross Site Collection Navigation

    - by Sahil Malik
    Ad:: SharePoint 2007 Training in .NET 3.5 technologies (more information). This article will serve as documentation of a fully functional codeplex project that I just created. This project will give you a WebPart that will give you security trimmed navigation across site collections. The first question is, why create such a project? In every single SharePoint project you will do, one question you will always be faced with is, what should the boundaries of sites be, and what should the boundaries of site collections be? There is no good or bad answer to this, because it really really depends on your needs. There are some factors in play here. Site Collections will allow you to scale, as a Site collection is the smallest entity you can put inside a content database Site collections will allow you to offer different levels of SLAs, because you put a site collection on a separate content database, and put that database on a separate server. Site collections are a security boundary – and they can be moved around at will without affecting other site collections. Site collections are also a branding boundary. They are also a feature deployment boundary, so you can have two site collections on the same web application with completely different nature of services. But site collections break navigation, i.e. a site collection at “/”, and a site collection at “/sites/mySiteCollection”, are completely independent of each other. If you have access to both, the navigation of / won’t show you a link to /sites/mySiteCollection. Some people refer to this as a huge issue in SharePoint. Luckily, some workarounds exist. A long time ago, I had blogged about “Implementing Consistent Navigation across Site Collections”. That approach was a no-code solution, it worked – it gave you a consistent navigation across site collections. But, it didn’t work in a security trimmed fashion! i.e., if I don’t have access to Site Collection ‘X’, it would still show me a link to ‘X’. Well this project gets around that issue. Simply deploy this project, and it’ll give you a WebPart. You can use that WebPart as either a webpart or as a server control dropped via SharePoint designer, and it will give you Security Trimmed Cross Site Collection Navigation. The code has been written for SP2010, but it will work in SP2007 with the help of http://spwcfsupport.codeplex.com . What do I need to do to make it work? I’m glad you asked! Simple! Deploy the .wsp (which you can download here). This will give you a site collection feature called “Winsmarts Cross Site Collection Navigation” as shown below. Go ahead and activate it, and this will give you a WebPart called “Winsmarts Navigation Web Part” as shown below: Just drop this WebPart on your page, and it will show you all site collections that the currently logged in user has access to. Really it’s that easy! This is shown as below - In the above example, I have two site collections that I created at /sites/SiteCollection1 and /sites/SiteCollection2. The navigation shows the titles. You see some extraneous crap as well, you might want to clean that – I’ll talk about that in a minute. What? You’re running into problems? If the problem you’re running into is that you are prompted to login three times, and then it shows a blank webpart that says “Loading your applications ..” and then craps out!, then most probably you’re using a different authentication scheme. Behind the scenes I use a custom WCF service to perform this job. OOTB, I’ve set it to work with NTLM, but if you need to make it work alternate authentications such as forms based auth, or client side certs, you will need to edit the %14%\ISAPI\Winsmarts.CrossSCNav\web.config file, specifically, this section - 1: <bindings> 2: <webHttpBinding> 3: <binding name="customWebHttpBinding"> 4: <security mode="TransportCredentialOnly"> 5: <transport clientCredentialType="Ntlm"/> 6: </security> 7: </binding> 8: </webHttpBinding> 9: </bindings> For Kerberos, change the “clientCredentialType” to “Windows” For Forms auth, remove that transport line For client certs – well that’s a bit more involved, but it’s just web.config changes – hit a good book on WCF or hire me for a billion trillion $. But fair warning, I might be too busy to help immediately. If you’re running into a different problem, please leave a comment below, but the code is pretty rock solid, so .. hmm .. check what you’re doing! BTW, I don’t  make any guarantee/warranty on this – if this code makes you sterile, unpopular, bad hairstyle, anything else, that is your problem! But, there are some known issues - I wrote this as a concept – you can easily extend it to be more flexible. Example, hierarchical nav, or, horizontal nav, jazzy effects with jquery or silverlight– all those are possible very very easily. This webpart is not smart enough to co-exist with another instance of itself on the same page. I can easily extend it to do so, which I will do in my spare(!?) time! Okay good! But that’s not all! As you can see, just dropping the WebPart may show you many extraneous site collections, or maybe you want to restrict which site collections are shown, or exclude a certain site collection to be shown from the navigation. To support that, I created a property on the WebPart called “UrlMatchPattern”, which is a regex expression you specify to trim the results :). So, just edit the WebPart, and specify a string property of “http://sp2010/sites/” as shown below. Note that you can put in whatever regex expression you want! So go crazy, I don’t care! And this gives you a cleaner look.   w00t! Enjoy! Comment on the article ....

    Read the article

  • Twitter traffic might not be what it seems

    - by Piet
    Are you using bit.ly stats to measure interest in the links you post on twitter? I’ve been hearing for a while about people claiming to get the majority of their traffic originating from twitter these days. Now, I’ve been playing with the twitter ruby gem recently, doing various experiments which I’ll not go into detail here because they could be regarded as spamming… if I’d conduct them on a large scale, that is. It’s scary to see people actually engaging with @replies crafted with some regular expressions and eliza-like trickery on status updates found using the twitter api. I’m wondering how Twitter is going to contain the coming spam-flood. When posting links I used bit.ly as url shortener, since this one seems to be the de-facto standard on twitter. A nice thing about bit.ly is that it shows some basic stats about the redirects it performs for your shortened links. To my surprise, most links posted almost immediately resulted in several visitors. Now, seeing that I was posting the links together with some information concerning what the link is about, I concluded that the people who were actually clicking the links should be very targeted visitors. This felt a bit like free adwords, and I suddenly started to understand why everyone was raving about getting traffic from twitter. How wrong I was! (and I think several 1000 online marketers with me) On the destination site I used a traffic logging solution that works by including a little javascript snippet in your pages. It seemed that somehow all visitors disappeared after the bit.ly redirect and before getting to the site, because I was hardly seeing any visitors there. So I started investigating what was happening: by looking at the logfiles of the destination site, and by making my own ’shortened’ urls by doing redirects using a very short domain name I own. This way, I could check the apache access_log before the redirects. Most user agents turned out to be bots without a doubt. Here’s an excerpt of user-agents awk’ed from apache’s access_log for a time period of about one hour, right after posting some links: AideRSS 2.0 (postrank.com) Java/1.6.0_13 Java/1.6.0_14 libwww-perl/5.816 MLBot (www.metadatalabs.com/mlbot) Mozilla/4.0 (compatible;MSIE 5.01; Windows -NT 5.0 - real-url.org) Mozilla/5.0 (compatible; Twitturls; +http://twitturls.com) Mozilla/5.0 (compatible; Viralheat Bot/1.0; +http://www.viralheat.com/) Mozilla/5.0 (Danger hiptop 4.6; U; rv:1.7.12) Gecko/20050920 Mozilla/5.0 (X11; U; Linux i686; en-us; rv:1.9.0.2) Gecko/2008092313 Ubuntu/9.04 (jaunty) Firefox/3.5 OpenCalaisSemanticProxy PycURL/7.18.2 PycURL/7.19.3 Python-urllib/1.17 Twingly Recon twitmatic Twitturly / v0.6 Wget/1.10.2 (Red Hat modified) Wget/1.11.1 (Red Hat modified) Of the few user-agents that seem ‘real’ at first, half are originating from an ip-address used by Amazon EC2. And I doubt people are setting op proxies on there. Oh yeah, Googlebot (the real deal, from a legit google owned address) is sucking up posted links like fresh oysters. I guess google is trying to make sure in advance to never be beaten by twitter in the ‘realtime search’ department. Actually, I think it’d be almost stupid NOT to post any new pages/posts/websites on Twitter, it must be one of the fastest ways to get a Googlebot visit. Same experiment with a real, established twitter account Now, because I was posting the url’s either as ’status’ messages or directed @people, on a test-account with hardly any (human) followers, I checked again using the twitter accounts from a commercial site I’m involved with. These accounts all have between 500 and 1000 targeted (I think) followers. I checked the destination access_logs and also added ‘my’ redirect after the bit.ly redirect: same results, although seemingly a bit higher real visitor/bot ratio. Btw: one of these account was ‘punished’ with a 1 week lock recently because the same (1 one!) status update was sent that was sent right before using another account. They got an email explaining the lock because the account didn’t act according to their TOS. I can’t find anything in their TOS about it, can you? I don’t think Twitter is on the right track punishing a legit account, knowing the trickery I had been doing with it’s api went totally unpunished. I might be wrong though, I often am. On the other hand: this commercial site reported targeted traffic and actual signups from visitors coming from Twitter. The ones that are really real visitors are also very targeted. I’m just not sure if the amount of work involved could hold up against an adwords campaign. Reposting the same link over and over again helps On thing I noticed: It helps to keep on reposting the same links with regular intervals. I guess most people only look at their first page when checking out recent posts of the ones they’re following, or don’t look too far back when performing a search. Now, this probably isn’t according to the twitter TOS. Actually, it might be spamming but no-one is obligated to follow anyone else of course. This way, I was getting more real visitors and less bots. To my surprise (when my programmer’s hat is on) there were still repeated visits from the same bots coming from the same ip-addresses. Did they expect to find something else when visiting for a 2nd or 3rd time? (actually,this gave me an idea: you can’t change a link once it’s posted, but you can change where it redirects to) Most bots were smart enough not to follow the same link again though. Are you successful in getting real visitors from Twitter? Are you only relying on bit.ly to provide traffic stats?

    Read the article

  • Monitor your Hard Drive’s Health with Acronis Drive Monitor

    - by Matthew Guay
    Are you worried that your computer’s hard drive could die without any warning?  Here’s how you can keep tabs on it and get the first warning signs of potential problems before you actually lose your critical data. Hard drive failures are one of the most common ways people lose important data from their computers.  As more of our memories and important documents are stored digitally, a hard drive failure can mean the loss of years of work.  Acronis Drive Monitor helps you avert these disasters by warning you at the first signs your hard drive may be having trouble.  It monitors many indicators, including heat, read/write errors, total lifespan, and more. It then notifies you via a taskbar popup or email that problems have been detected.  This early warning lets you know ahead of time that you may need to purchase a new hard drive and migrate your data before it’s too late. Getting Started Head over to the Acronis site to download Drive Monitor (link below).  You’ll need to enter your name and email, and then you can download this free tool. Also, note that the download page may ask if you want to include a trial of their for-pay backup program.  If you wish to simply install the Drive Monitor utility, click Continue without adding. Run the installer when the download is finished.  Follow the prompts and install as normal. Once it’s installed, you can quickly get an overview of your hard drives’ health.  Note that it shows 3 categories: Disk problems, Acronis backup, and Critical Events.  On our computer, we had Seagate DiskWizard, an image backup utility based on Acronis Backup, installed, and Acronis detected it. Drive Monitor stays running in your tray even when the application window is closed.  It will keep monitoring your hard drives, and will alert you if there’s a problem. Find Detailed Information About Your Hard Drives Acronis’ simple interface lets you quickly see an overview of how the drives on your computer are performing.  If you’d like more information, click the link under the description.  Here we see that one of our drives have overheated, so click Show disks to get more information. Now you can select each of your drives and see more information about them.  From the Disk overview tab that opens by default, we see that our drive is being monitored, has been running for a total of 368 days, and that it’s health is good.  However, it is running at 113F, which is over the recommended max of 107F.   The S.M.A.R.T. parameters tab gives us more detailed information about our drive.  Most users wouldn’t know what an accepted value would be, so it also shows the status.  If the value is within the accepted parameters, it will report OK; otherwise, it will show that has a problem in this area. One very interesting piece of information we can see is the total number of Power-On Hours, Start/Stop Count, and Power Cycle Count.  These could be useful indicators to check if you’re considering purchasing a second hand computer.  Simply load this program, and you’ll get a better view of how long it’s been in use. Finally, the Events tab shows each time the program gave a warning.  We can see that our drive, which had been acting flaky already, is routinely overheating even when our other hard drive was running in normal temperature ranges. Monitor Acronis Backups And Critical Errors In addition to monitoring critical stats of your hard drives, Acronis Drive Monitor also keeps up with the status of your backup software and critical events reported by Windows.  You can access these from the front page, or via the links on the left hand sidebar.  If you have any edition of any Acronis Backup product installed, it will show that it was detected.  Note that it can only monitor the backup status of the newest versions of Acronis Backup and True Image. If no Acronis backup software was installed, it will show a warning that the drive may be unprotected and will give you a link to download Acronis backup software.   If you have another backup utility installed that you wish to monitor yourself, click Configure backup monitoring, and then disable monitoring on the drives you’re monitoring yourself. Finally, you can view any detected Critical events from the Critical events tab on the left. Get Emailed When There’s a Problem One of Drive Monitor’s best features is the ability to send you an email whenever there’s a problem.  Since this program can run on any version of Windows, including the Server and Home Server editions, you can use this feature to stay on top of your hard drives’ health even when you’re not nearby.  To set this up, click Options in the top left corner. Select Alerts on the left, and then click the Change settings link to setup your email account. Enter the email address which you wish to receive alerts, and a name for the program.  Then, enter the outgoing mail server settings for your email.  If you have a Gmail account, enter the following information: Outgoing mail server (SMTP): smtp.gmail.com Port: 587 Username and Password: Your gmail address and password Check the Use encryption box, and then select TLS from the encryption options.   It will now send a test message to your email account, so check and make sure it sent ok. Now you can choose to have the program automatically email you when warnings and critical alerts appear, and also to have it send regular disk status reports.   Conclusion Whether you’ve got a brand new hard drive or one that’s seen better days, knowing the real health of your it is one of the best ways to be prepared before disaster strikes.  It’s no substitute for regular backups, but can help you avert problems.  Acronis Drive Monitor is a nice tool for this, and although we wish it wasn’t so centered around their backup offerings, we still found it a nice tool. Link Download Acronis Drive Monitor (registration required) Similar Articles Productive Geek Tips Quick Tip: Change Monitor Timeout From Command LineAnalyze and Manage Hard Drive Space with WinDirStatMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersDefrag Multiple Hard Drives At Once In WindowsFind Your Missing USB Drive on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

    Read the article

  • CodePlex Daily Summary for Sunday, April 04, 2010

    CodePlex Daily Summary for Sunday, April 04, 2010New ProjectsAcervo 2 - Gerenciador de coleções: Acervo 2 is a web application developed in ASP.NET 3.5 with Entity Framework, Coolite UI web controls and MySQL database that helps to catalog and ...AssemblyInfo Editor: AssemblyInfo Editor is a small Visual Studio 2010 extension I developed for my personal use mainly for automatically incrementing AssemblyVersion a...CommLine: It's a Command Line Interpreter. At the moment, it's a beta version, so I wait for developers that wanna help meFlowgraph Viewer: The flowgraph viewer enables users to view, build and share flowgraphs for the Crysis-franchise. It's built on Silverlight4, using MEF and Mvvmlight.Hash Calculator: WPF Windows 7 program to compute SHA1 & MD5 hash functions.MediaRSS library for .NET: This is a small set of libraries that allow you to create, read, and write MediaRSS files. By leveraging the syndication model object in .NET this...MEF Visualizer Tool: Helps to see what is going on inside the CompositionContainerone framework for developing asp.net project more elegent、flexible、and testable: if you are familiar with jsf、cdi、scoped javabean and work under asp.net, you may want to support aop and max flexibility and testability , all of ...Picasa Manager: A Silverlight Out Of Browser Application that Helps you manage your PicasaWeb albums in the easyest way possible.SharePhone: Windows Phone 7 library for connecting to SharePoint 2007/2010. Lets you work with SPWeb, SPList, reading/writing strong typed list items, user ...Silverlight Resource Extension: Silverlight Resource Extension. Extension silverlight project for use ResX resources and localize satellite dll.Silverlight Streamgraph: Streamgraph component for SilverlightTFTP Server: Managed TFTP server implementation, written in C#. Supports: - IPv4 and IPv6 - correct retry behavior. - TFTP options: block size, transfer size, a...Virtual UserGroup Video Helpers: This is a project that holds all the tools used by the C4MVC Virtual Usergroup. Tools written in C# and Powershell to automate, Live Meeting, Expr...xBlog: xBlog is a project to build a simple and extensible Blog Engine based on xml and linqXmlCodeEditor: XmlCodeEditor is a Silverlight 4 control based on RichTextControl that creates coloring and intellisense similar to the one in Visual Studio for ed...Zinc Launcher: Zinc Launcher is a simple Windows Media Center plugin that launches Zinc and attempts to manage the windows as seamlessly as possible. In addition ...New ReleasesAcervo 2 - Gerenciador de coleções: Acervo 2 - v1.0: Arquivos para implantação do sistema Acervo2 Aplicação web Web service Smart ClientAssemblyInfo Editor: Beta 1: Initial release of Assembly Info Editor. At this point, it is feature-complete and is relatively stable. There are undoubtedly some bugs to work o...Box2D.XNA: Box2D.XNA r70 Source Code and Solution: This version is synced to changeset 44697. This represents our official port of the C Box2D up to r70 on the Google Code project. With this versi...Boxee Launcher: Boxee Launcher Release 1.0.1.2: Will now stop Media Center playback before launching BoxeeBoxee Launcher: Boxee Launcher Release 1.0.1.3: Added a background window that attempts to display over the desktop and taskbar, and below Boxee and Media Center so that the desktop and taskbar a...CommLine: Beta Version 0.1: First Beta Of the AppCommLine: Source v0.1 Beta: Source Code C of 0.1 beta versionEncrypted Notes: Encrypted Notes 1.6.2: This is the latest version of Encrypted Notes (1.6.2), with general changes and improved randomness for the key generator. It has an installer that...Hash Calculator: HashCalculator: HashCalculator 1.0Hash Calculator: HashCalculator Source code: HashCalculator 1.0Hulu Launcher: Hulu Launcher 1.0.1.3: Added a background window that attempts to display over the desktop and taskbar, and below Hulu and Media Center so that the desktop and taskbar ar...Hulu Launcher: Hulu Launcher Release 1.0.1.2: Hulu Launcher will now stop playback in Media Center before launching Hulu Desktop.Innovative Games: 4.3 - Sprite Effects: Source code download for chapter 4.3 - "Sprite Effects"MediaRSS library for .NET: 0.1: Alpha release. Majority of MediaRSS spec is supported. A small set of unit test / sample code are included. A lightly tested CustomFormatter object...MEF Visualizer Tool: MEF Visualizer Tool 0.1: Help to see what going on in side CompositionContainer Container = new CompositionContainer( new AggregateCatalog( ...Ncqrs Framework - A CQRS framework for .NET: Ncqrs with sample application: This is the first release of the Ncqrs Framework. It contains the Ncqrs source code and a runnable sample application. All the code in this release...Rubik Cube's 3D Silverlight 3.0 Animated Solution: Rubik Cube 3D with Animated Solution: This project is a realization of Silverlight 3.0 Rubik Cube 3D with Animated Solution. The Solution is available for 3x3x3 cube, other features are...Scrabler: scrabler release 0.6.2.5: fixed a bug that werent executed some scriptsSharePhone: SharePhone: Initial release with basic functionality: Open SharePoint webs and subwebs Retrieve lists on SPWeb objects Read metadata/properties on lists ...SharePhone: SharePhone v.1.0.1: Fixed a bug that prevented saving list items to SharePointSharePoint Labs: SPLab4001A-FRA-Level100: SPLab4001A-FRA-Level100 This SharePoint Lab will teach you the first best practice you should apply when writing code with the SharePoint API. Lab ...Silverlight Resource Extension: ResourceExtension (alpha): Alpha version is not stable. Only for review.Silverlight Streamgraph: Port from processing.org: A port from the processing.org streamgraph. Code-heavy with very little XAML involved at this point.Theocratic Ministry School System: TMSS - Ver 1.1.1: What’s New! Added Menu Options 2010 Schedule Access 2007 Runtime There are still many uncompleted items so this is still a conceptual release....Theocratic Ministry School System: TMSS - Ver 1.1.2: Fixed the Schedule Import. Need needs to be tested. Click import button and make sure you can get the 2010 Schedule from the internet.thinktecture Starter STS (Community Edition): StarterSTS v1.0 RTW: Version 1.0 RTWTribe.Cache: Tribe.Cache Alpha - 0.2.0.0: Tribe.Cache Alpha - 0.2.0.0 - Now has sliding and absolute expiration on cache entries. Functional Alpha Release - But do not use in productionTwitterVB - A .NET Twitter Library: TwitterVB-2.3.1: This is mostly a minor release that adds br.st URL shortening to the menu (API key from http://br.st required)Virtu: Virtu 0.8.1: Source Requirements.NET Framework 3.5 with Service Pack 1 Visual Studio 2008 with Service Pack 1, or Visual C# 2008 Express Edition with Service Pa...Visual Studio DSite: Advanced C++ Calculator: An advanced visual c 2008 calculator that can do all your basic operations, plus some advanced mathematical functions. Source Code Only.xnaWebcam: xnaWebcam 0.3: xnaWebcam 0.3 Version 0.3: -ResolutionSet: 400x300 (Default), 800x600, 1024x720 -Settings Window got Icon -Settings Window Changes -DevConsole.cs ...Most Popular ProjectsRawrWBFS ManagerMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesDotNetNuke® Community EditionMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.RawrFacebook Developer ToolkitjQuery Library for SharePoint Web ServicesLINQ to TwitterBlogEngine.NETN2 CMSBase Class LibrariesFarseer Physics Engine

    Read the article

  • Adaptive ADF/WebCenter template for the iPad

    - by Maiko Rocha
    One of my WebCenter Portal customers was asking about adaptive design with ADF/WebCenter Portal and how they could go about creating an adaptive iPad template for their WebCenter Portal application. They were looking not only for the out-of-the-box support for mobile Safari which is certified against PS5+ (11.1.1.6) for ADF/WebCenter - but also to create a specific template to streamline their workflow on the iPad. Seems like they wanted something in the lines of Yahoo! Mail provides for the iPad - so the example I will use is shamelessly inspired by Y! Mail's iPad UI.  But first, let's quickly understand how can we bake in some adaptive goodness into ADF Faces. First thing we need to understand is, yes, there are a couple of constraints that we will need to work around, namely, the use or layout managers and skins. Please also keep in mind that I'm not and I don't pretend to be a web designer, much less an UX specialist, so feel free to leave your thoughts on the matter in the comments section. Now, back to the limitations. Layout Managers ADF Faces layout managers create an abstraction on top of the generated HTML code for a page so a developer doesn't need to be worried about how to size and dimension the UI layout (eg, af:panelStretchLayout). Although layout managers are very helpful, in this specific situation we will need to know a little bit more of how the final HTML is being rendered so we can apply the CSS class accordingly and create transition containers where the media queries will be applied - now, if you're using 11gR2 (11.1.2.2.3) there's the new component af:panelGridLayout (here and here) that will greatly improve creating responsive templates and pages because it is based on the grid/fluid systems and will generate straight out to DIVs on your final page. For now, I'm limited to PS5 and the af:panelStretchLayout component as a starting point because that's the release my customer is on. Skins You won't be able to use media queries, or use anything with "@" notation on the skin CSS file - the skin pre-processor will remove all extraneous "@" from the CSS file. The solution is to split your CSS in two separate files: a skin CSS file and plain CSS where you will add the media queries. The issue here is that you won't be able to use media queries for any faces components. We can, though, still apply the media queries for the components like af:panelGroupLayout and af:panelBorderLayout through their styleClass property to enable these components to be responsive to to the iPad orientation, by changing its dimensions, font sizes, hide/show areas, etc. Difference between responsive and adaptive design The best definition of adaptive vs responsive web design I could find is this: “Responsive web design,” as coined by Ethan Marcotte, means “fluid grids, fluid images/media & media queries.” “Adaptive web design,” as I use it, is about creating interfaces that adapt to the user’s capabilities (in terms of both form and function). To me, “adaptive web design” is just another term for “progressive enhancement” of which responsive web design can (an often should) be an integral part, but is a more holistic approach to web design in that it also takes into account varying levels of markup, CSS, JavaScript and assistive technology support. Responsive/adapative web design is much more than slapping an HTML template with CSS around your content or application. The content and application themselves are part of your web design - in other words, a responsive template is just an afterthought if it is not originating from a responsive design the involves the whole web application/s. Tips on responsive / adapative design with ADF/WebCenter Some of the tips listed below were already mentioned in multiple blog posts about ADF layout and skinning, but it is still worth remembering: a simple guideline for ADF/WebCenter apps would be to first create a high-level group of devices, for example: smartphones, tablets,  and desktop. For each of these large groups, create the basic structure to provide responsiveness: a page template, a skin, and an external CSS: pagetemplate_smartphone.jspx, smartphone_skin.css, smartphone-responsive.css pagetemplate_tablet.jspx, tablet_skin.css, tablet-responsive.css pagetemplate_desktop.jspx, desktop_skin.css, desktop-responsive.css These three assets can be changed on the fly through an user-agent check on the server side, delivering the right UI to the right device. Within each of the assets, you can make fine adjustments for each subgroup of devices with media queries - for example, smart phones with different screen dimensions and pixel density. Having these three groups and the corresponding assets per group seem to be a good compromise between trying to put everything on a single set of assets - specially considering the constraints above - and going to the other side of the spectrum to create assets per discrete device (iPhone4, iPhone5, Nexus, S3, etc.). Keep in mind that these are my rules and are not in any shape or form a best practice - this is how it fits best for the scenarios I've been working with. If you need to use HTML tags on your page, surround them with af:group to protect the DOM structure For stretchable/fluid layouts: Use non-stretching containers: panelGroupLayout, panelBorderLayout, … panelBorderLayout can be used to approximate HTML table component To avoid multiple scroll bars, do not nest scrolling PanelGroupLayout components. Consider layout="vertical" For stretchable/fluid layouts: Most stretchable ADF components also work in flowing context with dimensionsFrom="auto" To stretch a component horizontally, use styleClass="AFStretchWidth" instead of  "width:100%" Skinning Don't use CSS3 @media, @import, animations, etc. on skin css files. They will be removed. CSS3 properties within a class (box-shadow, transition, etc.) work just fine. Consider resetting some skin classes to better control their rendering: body {color: inherit;font: inherit;} af|document {-tr-inhibit: all;} af|commandLink {-tr-inhibit: all;} af|goLink {-tr-inhibit: all;} af|inputText::content {font: inherit;} Specific meta tags and CSS properties: Use  <meta name="viewport" content="width=device-width, initial-scale=1.0, minimum-scale=1.0, maximum-scale=1.0"/> to avoid zooming (if you want) Use -webkit-overflow-scrolling: touch to enable native momentum scrolling within overflown areas (here) Use text-rendering: optmizeLegibility to improve readability. (here) User text-overflow: ellipsis to gracefully crop overflown text. (here) The meta-tags are included in each and every page in the metaContainer facet of af:document tag. You can also use a javascript to inject the meta-tags from the template. For the purpose of the example, I wanted to use as few workarounds as possible.   The iPad template and sample application This sample application has been built as a WebCenter Portal application, but you will also be able to reuse the template and techniques on your vanilla ADF application. Keep in mind that I'm neither a designer nor a CSS specialist, so please don't bash me too much on the messy CSS file you'll find on the application.  I've extended the provided PreferencesBean class that comes with WebCenter Portal and added code to dinamically change the template and skin on the fly.   This is the sample application in landscape orientation: This is the sample application in portrait orientation - the left side menu hides automatically based on a CSS media query: Another screenshot with a skinned popup opened: This is a sample application for you to play with - ideally you shouldn't use it as a starting point. On the left side bar you will find links rendered from a WebCenter Portal navigation model - the link triggers a full request through an af:goLink, while the light blue PPR button triggers a PPR navigation. The dark blue toolbar buttons at the top don't have any function,while the Approve and Reject buttons show a skinned popup. The search box of course doesn't have any behavior attahed to it either. There's a known issue right now with some PPR calls that are randomly generating a 403 error redirecting to the login page - I didn't have time to investigate if this is iOS6 specific or not - if you have any insights please let me know your findings. You can download the sample here.

    Read the article

  • SQL SERVER – Interview Questions and Answers – Frequently Asked Questions – Introduction – Day 1 of 31

    - by pinaldave
    List of all the Interview Questions and Answers Series blogs Posts covering interview questions and answers always make for interesting reading.  Some people like the subject for their helpful hints and thought provoking subject, and others dislike these posts because they feel it is nothing more than cheating.  I’d like to discuss the pros and cons of a Question and Answer format here. Interview Questions and Answers are Helpful Just like blog posts, books, and articles, interview Question and Answer discussions are learning material.  The popular Dummy’s books or Idiots Guides are not only for “dummies,” but can help everyone relearn the fundamentals.  Question and Answer discussions can serve the same purpose.  You could call this SQL Server Fundamentals or SQL Server 101. I have administrated hundreds of interviews during my career and I have noticed that sometimes an interviewee with several years of experience lacks an understanding of the fundamentals.  These individuals have been in the industry for so long, usually working on a very specific project, that the ABCs of the business have slipped their mind. Or, when a college graduate is looking to get into the industry, he is not expected to have experience since he is just graduated. However, the new grad is expected to have an understanding of fundamentals and theory.  Sometimes after the stress of final exams and graduation, it can be difficult to remember the correct answers to interview questions, though. An interview Question and Answer discussion can be very helpful to both these individuals.  It is simply a way to go back over the building blocks of a topic.  Many times a simple review like this will help “jog” your memory, and all those previously-memorized facts will come flooding back to you.  It is not a way to re-learn a topic, but a way to remind yourself of what you already know. A Question and Answer discussion can also be a way to go over old topics in a more interesting manner.  Especially if you have been working in the industry, or taking lots of classes on the topic, everything you read can sound like a repeat of what you already know.  Going over a topic in a new format can make the material seem fresh and interesting.  And an interested mind will be more engaged and remember more in the end. Interview Questions and Answers are Harmful A common argument against a Question and Answer discussion is that it will give someone a “cheat sheet.” A new guy with relatively little experience can read the interview questions and answers, and then memorize them. When an interviewer asks him the same questions, he will repeat the answers and get the job. Honestly, is he good hire because he memorized the interview questions? Wouldn’t it be better for the interviewer to hire someone with actual experience?  The answer is not as easy as it seems – there are many different factors to be considered. If the interviewer is asking fundamentals-related questions only, he gets the answers he wants to hear, and then hires this first candidate – there is a good chance that he is hiring based on personality rather than experience.  If the interviewer is smart he will ask deeper questions, have more than one person on the interview team, and interview a variety of candidates.  If one interviewee happens to memorize some answers, it usually doesn’t mean he will automatically get the job at the expense of more qualified candidates. Another argument against interview Question and Answers is that it will give candidates a false sense of confidence, and that they will appear more qualified than they are. Well, if that is true, it will not last after the first interview when the candidate is asked difficult questions and he cannot find the answers in the list of interview Questions and Answers.  Besides, confidence is one of the best things to walk into an interview with! In today’s competitive job market, there are often hundreds of candidates applying for the same position.  With so many applicants to choose from, interviewers must make decisions about who to call back and who to hire based on their gut feeling.  One drawback to reading an interview Question and Answer article is that you might sound very boring in your interview – saying the same thing as every single candidate, and parroting answers that sound like someone else wrote them for you – because they did.  However, it is definitely better to go to an interview prepared, just make sure that you give a lot of thought to your answers to make them sound like your own voice.  Remember that you will be hired based on your skills as well as your personality, so don’t think that having all the right answers will make get you hired.  A good interviewee will be prepared, confident, and know how to stand out. My Opinion A list of interview Questions and Answers is really helpful as a refresher or for beginners. To really ace an interview, one needs to have real-world, hands-on experience with SQL Server as well. Interview questions just serve as a starter or easy read for experienced professionals. When I have to learn new technology, I often search online for interview questions and get an idea about the breadth and depth of the technology. Next Action I am going to write about interview Questions and Answers for next 30 days. I have previously written a series of interview questions and answers; now I have re-written them keeping the latest version of SQL Server and current industry progress in mind. If you have faced interesting interview questions or situations, please write to me and I will publish them as a guest post. If you want me to add few more details, leave a comment and I will make sure that I do my best to accommodate. Tomorrow we will start the interview Questions and Answers series, with a few interesting stories, best practices and guest posts. We will have a prize give-away and other awards when the series ends. List of all the Interview Questions and Answers Series blogs Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • WWDC and Tech Ed: A Tale of Two DevCons

    - by andrewbrust
    Next week marks the first full week of June.  Summer will feel in full swing and it will be a pretty big season for technology.  In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday.  Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans.  A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003.  I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch.  I think I have keen insights into Microsoft’s conference.  My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer.  Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches.  First off, let’s consider each show as a news and PR vehicle.  WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release.  These presumed announcements will make the show a magnet for the tech press and tech blogger elite.  Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all.  The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite.  Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate.  In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it).  This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem.  And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us.  Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances.  For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way.  Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers.  This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways.  WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related.  It’s all about the phone, music players and tablets.  However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development.  Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards.  In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content?  Like the target audience, it really runs the gamut.  The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions.  Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture.  I also count 19 sessions on Windows Phone 7.  Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products.  Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs.  I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience.  Microsoft has a serious focus on the cloud and  a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all.  Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event.  The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products.  Apple does not today figure into that analysis. Maybe one day it will.

    Read the article

  • CodePlex Daily Summary for Friday, September 07, 2012

    CodePlex Daily Summary for Friday, September 07, 2012Popular ReleasesUmbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.WinRT XAML Toolkit: WinRT XAML Toolkit - 1.2.1: WinRT XAML Toolkit based on the Windows 8 RTM SDK. Download the latest source from the SOURCE CODE page. For compiled version use NuGet. You can add it to your project in Visual Studio by going to View/Other Windows/Package Manager Console and entering: PM> Install-Package winrtxamltoolkit Features AsyncUI extensions Controls and control extensions Converters Debugging helpers Imaging IO helpers VisualTree helpers Samples Recent changes NOTE: Namespace changes DebugConsol...iPDC - Free Phasor Data Concentrator: iPDC-v1.3.1: iPDC suite version-1.3.1, Modifications and Bug Fixed (from v 1.3.0) New User Manual for iPDC-v1.3.1 available on websites. Bug resolved : PMU Simulator TCP connection error and hang connection for client (PDC). Now PMU Simulator (server) can communicate more than one PDCs (clients) over TCP and UDP parallely. PMU Simulator is now sending the exact data frames as mentioned in data rate by user. PMU Simulator data rate has been verified by iPDC database entries and PMU Connection Tes...Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.B INI Sharp Library: B INI Sharp Library v1.0.0.0 Final Realsed: The frist realsedActive Social Migrator: ActiveSocialMigrator 1.0.0 Beta: Beta release for the Active Social Migration tool.EntLib.com????????: ??????demo??-For SQL 2005-2008: EntLibShopping ???v3.0 - ??????demo??,?????SQL SERVER 2005/2008/2008 R2/2012 ??????。 ??(??)??????。 THANKS.Sistem LPK Pemkot Semarang: Panduan Penggunaan Sistem LPK: Panduan cara menggunakan Aplikasi Sistem LPK Bagian Pembangunan Kota SemarangActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine (0.2.0): ????ISE?0.1.0??,?????,ISE?0.2.0?????????,???????,????????20???follow?ISE,????,??ISE??????????,??????????,?????????,?????????0.2.0??????,??????????。 Iveely Search Engine ?0.2.0?????????“??????????”,??????,?????????,???????,???????????????????,????、????????????。???0.1.0????????????: 1. ??“????” ??。??????????,?????????,???????????????????。??:????????,????????????,??????????????????。??????。 2. ??“????”??。?0.1.0??????,???????,???????????????,?????????????,????????,?0.2.0?,???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.New ProjectsAdding 2013 Jewish Holidays for Outlook2003: Instruction: Copy the outlook.hol file to your compuer where Outlook2003 is installed. Double click the file, choose "Israel" and continue. That's it Agilcont System: Sistema de contabilidad para empresas privadas de preferencia para cajas que trabajan con efectivo en soles, dolares y con el material oroARB (A Request Broker): The idea is something like a Request Broker, but with some additional functionality.BATTLE.NET - SDK: This SDK provides the ability to use the Battle.net (Blizzard) Services for all supported Games such Diablo 3, World of Warcraft. Container Terminal System: SummaryDeclarative UX Streaming Data Language for the Cloud: Bringing a better communication paradigm for media and data..Get User Profile Information from SharePoint UserProfile Service: Used SharePoint object model to get the user profile information from the User Profile Service.Guess The City & State Windows 8 Source Code: Source code for Guess The City & State in Malaysia Windows 8 AppJquery Tree: This project is to demonstrate tree basic functionality.MCEBuddy 2.x: Convert and Remove Commercials for your Windows Media CenterMvcDesign: MvcDesign engine implementation projectMy Task Manager: This is a task manager module for DotNetNuke. I am using it to get started developing modules.MyAppwithbranches: MyAppwithbranchesProjecte prova: rpyGEO: pyGEO is a python package capable of parsing microarray data files. It also has a primitive plotting function.Scarlet Road: Scarlet Road is a top-down shooter. It's you against an unending horde of monsters.simplecounter: A simple counter, cick and counter.SiteEmpires: ????????Soundcloud Loader: Simple Tool for downloading Tracks from Soundcloud.Windows Phone Samples: Windows Phone code samples.

    Read the article

  • Web Platform Installer bundles for Visual Studio 2010 SP1 - and how you can build your own WebPI bundles

    - by Jon Galloway
    Visual Studio SP1 is  now available via the Web Platform Installer, which means you've got three options: Download the 1.5 GB ISO image Run the 750KB Web Installer (which figures out what you need to download) Install via Web PI Note: I covered some tips for installing VS2010 SP1 last week - including some that apply to all of these, such as removing options you don't use prior to installing the service pack to decrease the installation time and download size. Two Visual Studio 2010 SP1 Web PI packages There are actually two WebPI packages for VS2010 SP1. There's the standard Visual Studio 2010 SP1 package [Web PI link], which includes (quoting ScottGu's post): VS2010 2010 SP1 ASP.NET MVC 3 (runtime + tools support) IIS 7.5 Express SQL Server Compact Edition 4.0 (runtime + tools support) Web Deployment 2.0 The notes on that package sum it up pretty well: Looking for the latest everything? Look no further. This will get you Visual Studio 2010 Service Pack 1 and the RTM releases of ASP.NET MVC 3, IIS 7.5 Express, SQL Server Compact 4.0 with tooling, and Web Deploy 2.0. It's the value meal of Microsoft products. Tell your friends! Note: This bundle includes the Visual Studio 2010 SP1 web installer, which will dynamically determine the appropriate service pack components to download and install. This is typically in the range of 200-500 MB and will take 30-60 minutes to install, depending on your machine configuration. There is also a Visual Studio 2010 SP1 Core package [Web PI link], which only includes only the SP without any of the other goodies (MVC3, IIS Express, etc.). If you're doing any web development, I'd highly recommend the main pack since it the other installs are small, simple installs, but if you're working in another space, you might want the core package. Installing via the Web Platform Installer I generally like to go with the Web PI when possible since it simplifies most software installations due to things like: Smart dependency management - installing apps or tools which have software dependencies will automatically figure out which dependencies you don't have and add them to the list (which you can review before install) Simultaneous download and install - if your install includes more than one package, it will automatically pull the dependencies first and begin installing them while downloading the others Lists the latest downloads - no need to search around, as they're all listed based on a live feed Includes open source applications - a lot of popular open source applications are included as well as Microsoft software and tools No worries about reinstallation - WebPI installations detect what you've got installed, so for instance if you've got MVC 3 installed you don't need to worry about the VS2010 SP1 package install messing anything up In addition to the links I included above, you can install the WebPI from http://www.microsoft.com/web/downloads/platform.aspx, and if you have Web PI installed you can just tap the Windows key and type "Web Platform" to bring it up in the Start search list. You'll see Visual Studio SP1 listed in the spotlight list as shown below. That's the standard package, which includes MVC 3 / IIS 7.5 Express / SQL Compact / Web Deploy. If you just want the core install, you can use the search box in the upper right corner, typing in "Visual Studio SP1" as shown. Core Install: Use Web PI or the Visual Studio Web Installer? I think the big advantage of using Web PI to install VS 2010 SP1 is that it includes the other new bits. If you're going to install the SP1 core, I don't think there's as much advantage to using Web PI, as the Web PI Core install just downloads the Visual Studio Web Installer anyways. I think Web PI makes it a little easier to find the download, but not a lot. The Visual Studio Web Installer checks dependencies, so there's no big advantage there. If you do happen to hit any problems installing Visual Studio SP1 via Web PI, I'd recommend running the Visual Studio Web Installer, then running the Web PI VS 2010 SP1 package to get all the other goodies. I talked to one person who hit some random snag, recommended that, and it worked out. Custom Web Platform Installer bundles You can create links that will launch the Web Platform Installer with a custom list of tools. You can see an example of this by clicking through on the install button at http://asp.net/downloads (cancelling the installation dialog). You'll see this in the address bar: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;ASPNET;NETFramework4;SQLExpress;VWD Notice that the appid querystring parameter includes a semicolon delimited list, and you can make your own custom Web PI links with your own desired app list. I can think of a lot of cases where that would be handy: linking to a recommended software configuration from a software project or product, setting up a recommended / documented / supported install list for a software development team or IT shop, etc. For instance, here's a link that installs just VS2010 SP1 Core and the SQL CE tools: http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=VS2010SP1Core;SQLCETools Note: If you've already got all or some of the products installed, the display will reflect that. On my dev box which has the full SP1 package, here's what the above link gives me: Here's another example - on a fresh box I created a link to install MVC 3 and the Web Farm Framework (http://www.microsoft.com/web/gallery/install.aspx?appsxml=&appid=MVC3;WebFarmFramework) and got the following items added to the cart: But where do I get the App ID's? Aha, that's the trick. You can link to a list of cool packages, but you need to know the App ID's to link to them. To figure that out, I turned on tracing in Web Platform Installer  (also handy if you're ever having trouble with a WebPI install) and from the trace logs saw that the list of packages is pulled from an XML file: DownloadManager Information: 0 : Loading product xml from: https://go.microsoft.com/?linkid=9763242 DownloadManager Verbose: 0 : Connecting to https://go.microsoft.com/?linkid=9763242 with (partial) headers: Referer: wpi://2.1.0.0/Microsoft Windows NT 6.1.7601 Service Pack 1 If-Modified-Since: Wed, 09 Mar 2011 14:15:27 GMT User-Agent:Platform-Installer/3.0.3.0(Microsoft Windows NT 6.1.7601 Service Pack 1) DownloadManager Information: 0 : https://go.microsoft.com/?linkid=9763242 responded with 302 DownloadManager Information: 0 : Response headers: HTTP/1.1 302 Found Cache-Control: private Content-Length: 175 Content-Type: text/html; charset=utf-8 Expires: Wed, 09 Mar 2011 22:52:28 GMT Location: https://www.microsoft.com/web/webpi/3.0/webproductlist.xml Server: Microsoft-IIS/7.5 X-AspNet-Version: 2.0.50727 X-Powered-By: ASP.NET Date: Wed, 09 Mar 2011 22:53:27 GMT Browsing to https://www.microsoft.com/web/webpi/3.0/webproductlist.xml shows the full list. You can search through that in your browser / text editor if you'd like, open it in Excel as an XML table, etc. Here's a list of the App ID's as of today: SMO SMO32 PHP52ForIISExpress PHP53ForIISExpress StaticContent DefaultDocument DirectoryBrowse HTTPErrors HTTPRedirection ASPNET NETExtensibility ASP CGI ISAPIExtensions ISAPIFilters ServerSideIncludes HTTPLogging LoggingTools RequestMonitor Tracing CustomLogging ODBCLogging BasicAuthentication WindowsAuthentication DigestAuthentication ClientCertificateMappingAuthentication IISClientCertificateMappingAuthentication URLAuthorization RequestFiltering IPSecurity StaticContentCompression DynamicContentCompression IISManagementConsole IISManagementScriptsAndTools ManagementService MetabaseAndIIS6Compatibility WASProcessModel WASNetFxEnvironment WASConfigurationAPI IIS6WPICompatibility IIS6ScriptingTools IIS6ManagementConsole LegacyFTPServer FTPServer WebDAV LegacyFTPManagementConsole FTPExtensibility AdminPack AdvancedLogging WebFarmFrameworkNonLoc ExternalCacheNonLoc WebFarmFramework WebFarmFrameworkv2 WebFarmFrameworkv2_beta ExternalCache ECacheUpdate ARRv1 ARRv2Beta1 ARRv2Beta2 ARRv2RC ARRv2NonLoc ARRv2 ARRv2Update MVC MVCBeta MVCRC1 MVCRC2 DBManager DbManagerUpdate DynamicIPRestrictions DynamicIPRestrictionsUpdate DynamicIPRestrictionsLegacy DynamicIPRestrictionsBeta2 FTPOOB IISPowershellSnapin RemoteManager SEOToolkit VS2008RTM MySQL SQLDriverPHP52IIS SQLDriverPHP53IIS SQLDriverPHP52IISExpress SQLDriverPHP53IISExpress SQLExpress SQLManagementStudio SQLExpressAdv SQLExpressTools UrlRewrite UrlRewrite2 UrlRewrite2NonLoc UrlRewrite2RC UrlRewrite2Beta UrlRewrite10 UrlScan MVC3Installer MVC3 MVC3LocInstaller MVC3Loc MVC2 VWD VWD2010SP1Pack NETFramework4 WebMatrix WebMatrix_v1Refresh IISExpress IISExpress_v1 IIS7 AspWebPagesVS AspWebPagesVS_1_0 Plan9 Plan9Loc WebMatrix_WHP SQLCE SQLCETools SQLCEVSTools SQLCEVSTools_4_0 SQLCEVSToolsInstaller_4_0 SQLCEVSToolsInstallerNew_4_0 SQLCEVSToolsInstallerRepair_EN_4_0 SQLCEVSToolsInstallerRepair_JA_4_0 SQLCEVSToolsInstallerRepair_FR_4_0 SQLCEVSToolsInstallerRepair_DE_4_0 SQLCEVSToolsInstallerRepair_ES_4_0 SQLCEVSToolsInstallerRepair_IT_4_0 SQLCEVSToolsInstallerRepair_RU_4_0 SQLCEVSToolsInstallerRepair_KO_4_0 SQLCEVSToolsInstallerRepair_ZH_CN_4_0 SQLCEVSToolsInstallerRepair_ZH_TW_4_0 VWD2008 WebDAVOOB WDeploy WDeploy_v2 WDeployNoSMO WDeploy11 WinCache52 WinCache53 NETFramework35 WindowsImagingComponent VC9Redist NETFramework20SP2 WindowsInstaller31 PowerShell PowerShellMsu PowerShell2 WindowsInstaller45 FastCGIUpdate FastCGIBackport FastCGIIIS6 IIS51 IIS60 SQLNativeClient SQLNativeClient2008 SQLNativeClient2005 SQLCLRTypes SQLCLRTypes32 SMO_10_1 MySQLConnector PHP52 PHP53 PHPManager VSVWD2010Feature VWD2010WebFeature_0 VWD2010WebFeature_1 VWD2010WebFeature_2 VS2010SP1Prerequisite RIAServicesToolkitMay2010 Silverlight4Toolkit Silverlight4Tools VSLS SSMAMySQL WebsitePanel VS2010SP1Core VS2010SP1Installer VS2010SP1Pack MissingVWDOrVSVWD2010Feature VB2010Beta2Express VCS2010Beta2Express VC2010Beta2Express RIAServicesToolkitApr2010 VS2010Beta1 VS2010RC VS2010Beta2 VS2010Beta2Express VS2k8RTM VSCPP2k8RTM VSVB2k8RTM VSCS2k8RTM VSVWDFeature LegacyWinCache SQLExpress2005 SSMS2005

    Read the article

  • Prioritizing Product Features

    - by Robert May
    A very common task in Agile Environments is prioritization.  Teams that are functioning well will prioritize new features, old features, the backlog, and any other source of stories for the team, and they’ll do it regularly. Not all teams are good at prioritizing according to the real return on investment that building stories will yield to the company.  This is unfortunate.  Too often, teams end up building features that are less valuable, and everyone seems to know it except perhaps the product owner!  Most features built into software are never even used.  Clearly, not much return for features that go unused. So how does a company avoid building features that add little value to the company?  This is a tough question to answer, but usually, this prioritization starts at the top with the executives of the company.  After all, they’re responsible for the overall vision of the company. Here’s what I recommend: Know your market. Know your customers and users. Know where you’re going and what you want to achieve. Implement the Vision Know Your Market We often see companies that don’t know their market.  Personally, I’m surprised by this.  These companies don’t know who their competitors are, don’t know what features make their product desirable in the market, and in many cases, get by with saying, “I’ve been doing this for XX years.  I know what the market wants!”  In many cases, they equate “marketing” with “advertising” and don’t understand the difference. This is almost never true.  Good companies will spend significant amounts of time and money finding out who they’re competing against and what makes their competitors successful in the marketplace.  Good companies understand that marketing involves more than just advertising.  Often, marketing is mostly research and analysis, not sales.  Until you understand your market, you cannot know what features will give you the best return on your investment dollar. Good companies have a marketing department and can answer the next important step which is to know your customers and your users. Know your Customers and Users First, note that I included both customers and users.  They’re often not the same thing.  Users use the product that you build.  Customers buy the product that you build.  It’s a subtle difference, but too often, I’ve seen companies that focus exclusively on one or the other and are not successful simply because they ignore an important part of the group. If your company is doing appropriate marketing, you know that these are two different aspects of your product and that both deserve attention to have a product that is successful in your target market.  Your marketing department should be spending a lot of time understanding these personas and then conveying that information to the company. I’m always surprised when development teams think that they can build a product that people want to use without understanding the users of that product.  Developers think differently than most people in the world.  They know what the computer is doing.  The computer isn’t magic to them.  So when they assume that they know how to build something, they bring with them quite a bit of baggage.  Never assume that you know your customer unless you’re regularly having interaction with them.  Also, don’t just leave this to Marketing or Product Management.  Take them time to get your developers out with the customers as well.  Developers are very smart people, and often, seeing how someone uses their software inspires them to make a much better product. Very often, because the users and customers aren’t know, teams will spend a significant amount of time building apps that are super flexible and configurable so that any possible combination of feature can be used.  This demonstrates a clear lack of understanding of the customer.  Most configuration questions can quickly be answered by talking to the customer.  In most cases, if your software requires significant setup and configuration before its usable, you probably don’t know your customers and users very well. Until you know your customers, you cannot know what features will be most valuable to your customers and you cannot build those features in a way that your customers can use. Know Where You’re Going and What You Want to Achieve Many companies suffer from not having a plan.  Executives will tell the team to make them a plan.  The team, not knowing their market and customers and users, will come up with a plan that doesn’t reflect reality and doesn’t consider ROI.  Management then wonders why the product is doing poorly in the market place. Instead of leaving this up to the teams, as executives, work with Marketing to understand what broad categories of features will sell the most product in the marketplace.  Then, once you’ve determined that, give this vision to the team and let them run with it.  Revise the vision as needed, but avoid changing streams frequently.  Sure, sometimes you need to, but often, executives will change priorities many times a month, leading to nothing more than confusion.  If the team has a vision, they’ll be able to execute that vision far better than they could otherwise. By knowing what products are most important, you can set budgetary goals and guidelines that will help you achieve the vision that was created. Implement the Vision Creating the vision is often where the general executives stop participating in the plan.  The team is responsible for implementing that vision.  Executives should attend showcases and and should remain aware of the progress that the team is making towards meeting the vision, however. Once a broad vision has been created, the team should break that vision down into minimal market features (MMF).  These MMFs should be sized using story points so that, using the team’s velocity, an estimated cost can be determined for each feature.  The product management team should then try to quantify the relative value of the MMFs based on customer feedback and interviews.  Once the value and cost of creating the feature is understood, a return on investment can be calculated.  The features should then be prioritized with the MMF’s that have the highest value and lowest cost rising to the top of features to implement.  Don’t let politics get in the way! Once the MMF’s have been prioritized, they should go through release planning to schedule them for implementation. Conclusion By having a good grasp on the strategy of the company, your Agile teams can be much more effective.  Each and every story the team is implementing will roll up into features that matter to the company and provide ROI to them.  The steps outlined in this post should be repeated on a regular basis.  I recommend reviewing them at least once per quarter to make sure that the vision hasn’t shifted and that the teams are still working on what matters most to the company. Technorati Tags: Agile,Product Owner,ROI

    Read the article

  • Brighton Rocks: UA Europe 2011

    - by ultan o'broin
    User Assistance Europe 2011 was held in Brighton, UK. Having seen Quadrophenia a dozen times, I just had to go along (OK, I wanted to talk about messages in enterprise applications). Sadly, it rained a lot, though that was still eminently more tolerable than being stuck home in Dublin during Bloomsday. So, here are my somewhat selective highlights and observations from the conference, massively skewed towards my own interests, as usual. Enjoyed Leah Guren's (Cow TC) great start ‘keynote’ on the Cultural Dimensions of Software Help Usage. Starting out by revisiting Hofstede's and Hall's work on culture (how many times I have done this for Multilingual magazine?) and then Neilsen’s findings on age as an indicator of performance, Leah showed how it is the expertise of the user that user assistance (UA) needs to be designed for (especially for high-end users), with some considerations made for age, while the gender and culture of users are not major factors. Help also needs to be contextual and concise, embedded close to the action. That users are saying things like “If I want help on Office, I go to Google ” isn't all that profound at this stage, but it is always worth reiterating how search can be optimized to return better results for users. Interestingly, regardless of user education level, the issue of information quality--hinging on the lynchpin of terminology reflecting that of the user--is critical. Major takeaway for me there. Matthew Ellison’s sessions on embedded help and demos were also impressive. Embedded help that is concise and contextual is definitely a powerful UX enabler, and I’m pleased to say that in Oracle Fusion Applications we have embraced the concept fully. Matthew also mentioned in his session about successful software demos that the principle of modality with demos is a must. Look no further than Oracle User Productivity Kit demos See It!, Try It!, Know It, and Do It! modes, for example. I also found some key takeaways in the presentation by Marie-Louise Flacke on notes and warnings. Here, legal considerations seemed to take precedence over providing any real information to users. I was delighted when Marie-Louise called out the Oracle JDeveloper documentation as an exemplar of how to use notes and instructions instead of trying to scare the bejaysus out of people and not providing them with any real information they’d find useful instead. My own session on designing messages for enterprise applications was well attended. Knowing your user profiles (remember user expertise is the king maker for UA so write for each audience involved), how users really work, the required application business and UI rules, what your application technology supports, and how messages integrate with the enterprise help desk and support policies and you will go much further than relying solely on the guideline of "writing messages in plain language". And, remember the value in warnings and confirmation messages too, and how you can use them smartly. I hope y’all got something from my presentation and from my answers to questions afterwards. Ellis Pratt stole the show with his presentation on applying game theory to software UA, using plenty of colorful, relevant examples (check out the Atlassian and DropBox approaches, for example), and striking just the right balance between theory and practice. Completely agree that the approach to take here is not to make UA itself a game, but to invoke UA as part of a bigger game dynamic (time-to-task completion, personal and communal goals, personal achievement and status, and so on). Sure there are gotchas and limitations to gamification, and we need to do more research. However, we'll hear a lot more about this subject in coming years, particularly in the enterprise space. I hope. I also heard good things about the different sessions about DITA usage (including one by Sonja Fuga that clearly opens the door for major innovation in the community content space using WordPress), the progressive disclosure of information (Cerys Willoughby), an overview of controlled language (or "information quality", as I like to position it) solutions and rationale by Dave Gash, and others. I also spent time chatting with Mike Hamilton of MadCap Software, who showed me a cool demo of their Flare product, and the Lingo translation solution. I liked the idea of their licensing model for workers-on-the-go; that’s smart UX-awareness in itself. Also chatted with Julian Murfitt of Mekon about uptake of DITA in the enterprise space. In all, it's worth attending UA Europe. I was surprised, however, not to see conference topics about mobile UA, community conversation and content, and search in its own right. These are unstoppable forces now, and the latter is pretty central to providing assistance now to all but the most irredentist of hard-copy fetishists or advanced technical or functional users working away on the back end of applications and systems. Only saw one iPad too (says the guy who carries three laptops). Tweeting during the conference was pretty much nonexistent during the event, so no community energy there. Perhaps all this can be addressed next year. I would love to see the next UA Europe event come to Dublin (despite Bloomsday, it's not a bad place place, really) now that hotels are so cheap and all. So, what is my overall impression of the state of user assistance in Europe? Clearly, there are still many people in the industry who feel there is something broken with the traditional forms of user assistance (particularly printed doc) and something needs to be done about it. I would suggest they move on and try and embrace change, instead. Many others see new possibilities, offered by UX and technology, as well as the reality of online user behavior in an increasingly connected world and that is encouraging. Such thought leaders need to be listened to. As Ellis Pratt says in his great book, Trends in Technical Communication - Rethinking Help: “To stay relevant means taking a new perspective on the role (of technical writer), and delivering “products” over and above the traditional manual and online Help file... there are a number of new trends in this field - some complementary, some conflicting. Whatever trends emerge as the norm, it’s likely the status quo will change.” It already has, IMO. I hear similar debates in the professional translation world about the onset of translation crowd sourcing (the Facebook model) and machine translation (trust me, that battle is over). Neither of these initiatives has put anyone out of a job and probably won't, though the nature of the work might change. If anything, such innovations have increased the overall need for professional translators as user expectations rise, new audiences emerge, and organizations need to collate and curate user-generated content, combining it with their own. Perhaps user assistance professionals can learn from other professions and grow accordingly.

    Read the article

  • Product Development Investment: A Measure of Vendor Performance

    - by Jim Mcglothlin
    The relationship between a large, complex organization and its key suppliers of information technology is normally more than just "strategic". Expectations about the duration of the relationship typically exceed 20 years. Enterprise applications and technology infrastructure are not expected to be changed out like petunias. So how would you rate the due diligence processes as performed in Higher Education when selecting critical, transformational information technology? My observation: I see a lot of effort put into elaborate demonstration of basic software functionality. I see a lot of attention paid to the cost element of technology acquisition, including the contracted cost of implementation consulting services. But the factor that receives only cursory analysis and due diligence is long-term performance--the ability of a vendor to grow, expand, and develop, and bring its customers along with it. So what should you look for in a long-term IT supplier? Oracle has a public track record for product development. The annual investment has been on a run rate of almost $3 Billion organic product development. Oracle's well-publicized acquisitions and mergers have been supplemental to its R&D. This is important for Higher Education. Another meaningful way to evaluate a company is to look at the tangible track record of enhancement. Consider the Oracle-PeopleSoft enterprise business platform since acquired by Oracle 6 years ago: Product or Technology Enhancement Customer or User Impact Service Oriented Architecture (SOA) 300+ new web services delivered in versions 9.0 & 9.1 provide flexibility, so that customers can integrate PeopleSoft with other applications. Campus Solutions has added Admissions and Constituent Web Services. Constituent Relationship Management PeopleSoft CRM 9.1 for Higher Education introduced new process flows for student recruiting and retention to support "Student Success" initiatives. A 360 view of the constituent is now delivered, and the concept of a single-stop Student Services Center is now in CRM 9.1 with tight integration to PeopleSoft Campus Solutions. Human Capital Management Contract Pay for Education, with flexibility for configuration and calculation, has been extended in HCM 9.1. New chartfield integration among Project Costing - Time & Labor - Payroll to serve the labor distribution requirements for Grants / Sponsored Research. Talent Management PeopleSoft 9.0 and 9.1 feature an integrated talent management approach centered on definitions in "Profile Manager", with all new usability improvements. Internal and external candidate pools, and the entire recruitment process, are driven by delivered configurable selection and on-boarding processes. Interview scheduling, and online job offers are newly delivered processes. Performance Management PeopleSoft HCM ePerformance 9.1 will include significant new functionality designed to help organizations more effectively align business objectives with employee goals. Using an Organization Chart view, your business goals can flow down to become tangible objectives per employee. Succession Planning / Workforce Development New in HCM 9.0, enhanced in 9.1, is a planning capability for regular or unusual (major organizational change) succession of internal or external candidates. PeopleSoft supports employee-based career planning, which ultimately increases the integrity of the succession planning process (identify their career needs, plans, preferences, and interests). Dashboards / Oracle Business Intelligence Application Suite Oracle Human Resources Analytics provides the workforce information foundation that integrates data from HR functional areas and Finance. Oracle Human Resources Analytics delivers 9 dashboards and over 200 reports. Provide your HR professionals and front-line managers the tools to analyze workforce staffing, retention, productivity, to better source high-quality applicants, and to reduce absence costs. Multi-year Planning and Commitment Control External funding sources, especially Grants, require a multi-year encumbrance business process. PeopleSoft HCM 9.1 adds multi-year funding and commitment control, including budget checking. The newly designed Real Time Budget Checking will provide the customer with an updated snapshot of their budget and encumbrances at any given time. Position Budgeting with Hyperion Hyperion Planning world-class products now include delivered integration to PeopleSoft HCM. Position Budgeting is available in the new Public Sector Planning module of Hyperion. Web 2.0 features for the latest in usability PeopleSoft 9.1 features a contemporary internet user experience: Partial-page refreshing Drag and drop pagelets New menu structure Navigation pagelets Modal popup message windows Favorites & recently used links Type-ahead Drag and drop grid columns, pop-out grids Portal Workspaces Enterprise 2.0 for your collaborative web communities, using new content management, along with Wikis, blogs, and discussion forums in PeopleSoft Portal 9.1. PeopleTools enhanced by Oracle Fusion Middleware Standards-based tools have been added to the PeopleTools application infrastructure: BI (XML) Publisher, Java tools. Certified for use with PeopleSoft: Oracle Business Intelligence (OBIEE), Oracle Enterprise Manager, Oracle Weblogic Server, Oracle SOA Suite. Hosting for PeopleSoft applications A solid new deployment option: Oracle On Demand remote hosting center for high scalability, security, and continuity of operations. Business Process Outsourcing (BPO) for HCM / Payroll functions Partnership with AT&T provides hosting of HR/Payroll application along with payroll business process operations, and subscription-based service fees (SaaS). AT&T BPO full service includes pay sheet processing, bank and 3rd party file transfer, payroll tax handling, etc. Continuous Delivery Model Feature Packs provide faster time-to-benefit; new features become available in PeopleSoft 9.1 (or Campus Solutions 9.0) without need to perform upgrade. Golden person data model across all campus applications Oracle Higher Education Constituent Hub provides synchronization and data governance of person data across any application, e.g. HR/ Payroll, Student Information System, Housing, Emergency Contact, LMS, CRM. Oracle's aggressive enhancement plans within the "Applications Unlimited" program continue, as new functionality is under development for a new version of a PeopleSoft release planned for 2012. Meanwhile, new capabilities are planned on an annual basis in Feature Packs. PeopleSoft just delivered the HCM 2010 Feature Pack and another is planned for 2011. In February we plan to have over 100 customers from our Customer Advisory Boards at our PeopleSoft Development Center in California to review designs for all of these releases. For those of you near New York City The investment and progressive development story described above is the subject of an Oracle road show event on February 9, 2011. Charting Your Course with Oracle Applications is a global event series designed to help business and IT executives assess the impact of new inflection points on their business and applications roadmap: changing workforces, shifting customer and constituent bases, and increased volatility. Learn how innovations ranging from new deployment models like cloud computing to the introduction of social applications and smart devices are delivering results across all areas of business and industry. THIS DOCUMENT IS FOR INFORMATIONAL PURPOSES ONLY AND MAY NOT BE INCORPORATED INTO A CONTRACT OR AGREEMENT.

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • How to configure VPN in Windows XP

    - by SAMIR BHOGAYTA
    VPN Overview A VPN is a private network created over a public one. It’s done with encryption, this way, your data is encapsulated and secure in transit – this creates the ‘virtual’ tunnel. A VPN is a method of connecting to a private network by a public network like the Internet. An internet connection in a company is common. An Internet connection in a Home is common too. With both of these, you could create an encrypted tunnel between them and pass traffic, safely - securely. If you want to create a VPN connection you will have to use encryption to make sure that others cannot intercept the data in transit while traversing the Internet. Windows XP provides a certain level of security by using Point-to-Point Tunneling Protocol (PPTP) or Layer Two Tunneling Protocol (L2TP). They are both considered tunneling protocols – simply because they create that virtual tunnel just discussed, by applying encryption. Configure a VPN with XP If you want to configure a VPN connection from a Windows XP client computer you only need what comes with the Operating System itself, it's all built right in. To set up a connection to a VPN, do the following: 1. On the computer that is running Windows XP, confirm that the connection to the Internet is correctly configured. • You can try to browse the internet • Ping a known host on the Internet, like yahoo.com, something that isn’t blocking ICMP 2. Click Start, and then click Control Panel. 3. In Control Panel, double click Network Connections 4. Click Create a new connection in the Network Tasks task pad 5. In the Network Connection Wizard, click Next. 6. Click Connect to the network at my workplace, and then click Next. 7. Click Virtual Private Network connection, and then click Next. 8. If you are prompted, you need to select whether you will use a dialup connection or if you have a dedicated connection to the Internet either via Cable, DSL, T1, Satellite, etc. Click Next. 9. Type a host name, IP or any other description you would like to appear in the Network Connections area. You can change this later if you want. Click Next. 10. Type the host name or the Internet Protocol (IP) address of the computer that you want to connect to, and then click Next. 11. You may be asked if you want to use a Smart Card or not. 12. You are just about done, the rest of the screens just verify your connection, click Next. 13. Click to select the Add a shortcut to this connection to my desktop check box if you want one, if not, then leave it unchecked and click finish. 14. You are now done making your connection, but by default, it may try to connect. You can either try the connection now if you know its valid, if not, then just close it down for now. 15. In the Network Connections window, right-click the new connection and select properties. Let’s take a look at how you can customize this connection before it’s used. 16. The first tab you will see if the General Tab. This only covers the name of the connection, which you can also rename from the Network Connection dialog box by right clicking the connection and selecting to rename it. You can also configure a First connect, which means that Windows can connect the public network (like the Internet) before starting to attempt the ‘VPN’ connection. This is a perfect example as to when you would have configured the dialup connection; this would have been the first thing that you would have to do. It's simple, you have to be connected to the Internet first before you can encrypt and send data over it. This setting makes sure that this is a reality for you. 17. The next tab is the Options Tab. It is The Options tab has a lot you can configure in it. For one, you have the option to connect to a Windows Domain, if you select this check box (unchecked by default), then your VPN client will request Windows logon domain information while starting to work up the VPN connection. Also, you have options here for redialing. Redial attempts are configured here if you are using a dial up connection to get to the Internet. It is very handy to redial if the line is dropped as dropped lines are very common. 18. The next tab is the Security Tab. This is where you would configure basic security for the VPN client. This is where you would set any advanced IPSec configurations other security protocols as well as requiring encryption and credentials. 19. The next tab is the Networking Tab. This is where you can select what networking items are used by this VPN connection. 20. The Last tab is the Advanced Tab. This is where you can configure options for configuring a firewall, and/or sharing. Connecting to Corporate Now that you have your XP VPN client all set up and ready, the next step is to attempt a connection to the Remote Access or VPN server set up at the corporate office. To use the connection follow these simple steps. To open the client again, go back to the Network Connections dialog box. 1. One you are in the Network Connection dialog box, double-click, or right click and select ‘Connect’ from the menu – this will initiate the connection to the corporate office. 2. Type your user name and password, and then click Connect. Properties bring you back to what we just discussed in this article, all the global settings for the VPN client you are using. 3. To disconnect from a VPN connection, right-click the icon for the connection, and then click “Disconnect” Summary In this article we covered the basics of building a VPN connection using Windows XP. This is very handy when you have a VPN device but don’t have the ‘client’ that may come with it. If the VPN Server doesn’t use highly proprietary protocols, then you can use the XP client to connect with. In a future article I will get into the nuts and bolts of both IPSec and more detail on how to configure the advanced options in the Security tab of this client. 678: The remote computer did not respond. 930: The authentication server did not respond to authentication requests in a timely fashion. 800: Unable to establish the VPN connection. 623: The system could not find the phone book entry for this connection. 720: A connection to the remote computer could not be established. More on : http://www.windowsecurity.com/articles/Configure-VPN-Connection-Windows-XP.html

    Read the article

  • SQL University: Database testing and refactoring tools and examples

    - by Mladen Prajdic
    This is a post for a great idea called SQL University started by Jorge Segarra also famously known as SqlChicken on Twitter. It’s a collection of blog posts on different database related topics contributed by several smart people all over the world. So this week is mine and we’ll be talking about database testing and refactoring. In 3 posts we’ll cover: SQLU part 1 - What and why of database testing SQLU part 2 - What and why of database refactoring SQLU part 3 - Database testing and refactoring tools and examples This is the third and last part of the series and in it we’ll take a look at tools we can test and refactor with plus some an example of the both. Tools of the trade First a few thoughts about how to go about testing a database. I'm firmily against any testing tools that go into the database itself or need an extra database. Unit tests for the database and applications using the database should all be in one place using the same technology. By using database specific frameworks we fragment our tests into many places and increase test system complexity. Let’s take a look at some testing tools. 1. NUnit, xUnit, MbUnit All three are .Net testing frameworks meant to unit test .Net application. But we can test databases with them just fine. I use NUnit because I’ve always used it for work and personal projects. One day this might change. So the thing to remember is to be flexible if something better comes along. All three are quite similar and you should be able to switch between them without much problem. 2. TSQLUnit As much as this framework is helpful for the non-C# savvy folks I don’t like it for the reason I stated above. It lives in the database and thus fragments the testing infrastructure. Also it appears that it’s not being actively developed anymore. 3. DbFit I haven’t had the pleasure of trying this tool just yet but it’s on my to-do list. From what I’ve read and heard Gojko Adzic (@gojkoadzic on Twitter) has done a remarkable job with it. 4. Redgate SQL Refactor and Apex SQL Refactor Neither of these refactoring tools are free, however if you have hardcore refactoring planned they are worth while looking into. I’ve only used the Red Gate’s Refactor and was quite impressed with it. 5. Reverting the database state I’ve talked before about ways to revert a database to pre-test state after unit testing. This still holds and I haven’t changed my mind. Also make sure to read the comments as they are quite informative. I especially like the idea of setting up and tearing down the schema for each test group with NHibernate. Testing and refactoring example We’ll take a look at the simple schema and data test for a view and refactoring the SELECT * in that view. We’ll use a single table PhoneNumbers with ID and Phone columns. Then we’ll refactor the Phone column into 3 columns Prefix, Number and Suffix. Lastly we’ll remove the original Phone column. Then we’ll check how the view behaves with tests in NUnit. The comments in code explain the problem so be sure to read them. I’m assuming you know NUnit and C#. T-SQL Code C# test code USE tempdbGOCREATE TABLE PhoneNumbers( ID INT IDENTITY(1,1), Phone VARCHAR(20))GOINSERT INTO PhoneNumbers(Phone)SELECT '111 222333 444' UNION ALLSELECT '555 666777 888'GO-- notice we don't have WITH SCHEMABINDINGCREATE VIEW vPhoneNumbersAS SELECT * FROM PhoneNumbersGO-- Let's take a look at what the view returns -- If we add a new columns and rows both tests will failSELECT *FROM vPhoneNumbers GO -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- refactor to split Phone column into 3 partsALTER TABLE PhoneNumbers ADD Prefix VARCHAR(3)ALTER TABLE PhoneNumbers ADD Number VARCHAR(6)ALTER TABLE PhoneNumbers ADD Suffix VARCHAR(3)GO-- update the new columnsUPDATE PhoneNumbers SET Prefix = LEFT(Phone, 3), Number = SUBSTRING(Phone, 5, 6), Suffix = RIGHT(Phone, 3)GO-- remove the old columnALTER TABLE PhoneNumbers DROP COLUMN PhoneGO-- This returns unexpected results!-- it returns 2 columns ID and Phone even though -- we don't have a Phone column anymore.-- Notice that the data is from the Prefix column-- This is a danger of SELECT *SELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will FAIL -- for a fix we have to call sp_refreshview -- to refresh the view definitionEXEC sp_refreshview 'vPhoneNumbers'-- after the refresh the view returns 4 columns-- this breaks the input/output behavior of the database-- which refactoring MUST NOT doSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will FAIL -- DoesViewReturnCorrectData test will FAIL -- to fix the input/output behavior change problem -- we have to concat the 3 columns into one named PhoneALTER VIEW vPhoneNumbersASSELECT ID, Prefix + ' ' + Number + ' ' + Suffix AS PhoneFROM PhoneNumbersGO-- now it works as expectedSELECT *FROM vPhoneNumbers -- DoesViewReturnCorrectColumns test will SUCCEED -- DoesViewReturnCorrectData test will SUCCEED -- clean upDROP VIEW vPhoneNumbersDROP TABLE PhoneNumbers [Test]public void DoesViewReturnCoorectColumns(){ // conn is a valid SqlConnection to the server's tempdb // note the SET FMTONLY ON with which we return only schema and no data using (SqlCommand cmd = new SqlCommand("SET FMTONLY ON; SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned schema: number of columns, column names and data types Assert.AreEqual(dt.Columns.Count, 2); Assert.AreEqual(dt.Columns[0].Caption, "ID"); Assert.AreEqual(dt.Columns[0].DataType, typeof(int)); Assert.AreEqual(dt.Columns[1].Caption, "Phone"); Assert.AreEqual(dt.Columns[1].DataType, typeof(string)); }} [Test]public void DoesViewReturnCorrectData(){ // conn is a valid SqlConnection to the server's tempdb using (SqlCommand cmd = new SqlCommand("SELECT * FROM vPhoneNumbers", conn)) { DataTable dt = new DataTable(); dt.Load(cmd.ExecuteReader(CommandBehavior.CloseConnection)); // test returned data: number of rows and their values Assert.AreEqual(dt.Rows.Count, 2); Assert.AreEqual(dt.Rows[0]["ID"], 1); Assert.AreEqual(dt.Rows[0]["Phone"], "111 222333 444"); Assert.AreEqual(dt.Rows[1]["ID"], 2); Assert.AreEqual(dt.Rows[1]["Phone"], "555 666777 888"); }}   With this simple example we’ve seen how a very simple schema can cause a lot of problems in the whole application/database system if it doesn’t have tests. Imagine what would happen if some outside process would depend on that view. It would get wrong data and propagate it silently throughout the system. And that is not good. So have tests at least for the crucial parts of your systems. And with that we conclude the Database Testing and Refactoring week at SQL University. Hope you learned something new and enjoy the learning weeks to come. Have fun!

    Read the article

  • C#: Does an IDisposable in a Halted Iterator Dispose?

    - by James Michael Hare
    If that sounds confusing, let me give you an example. Let's say you expose a method to read a database of products, and instead of returning a List<Product> you return an IEnumerable<Product> in iterator form (yield return). This accomplishes several good things: The IDataReader is not passed out of the Data Access Layer which prevents abstraction leak and resource leak potentials. You don't need to construct a full List<Product> in memory (which could be very big) if you just want to forward iterate once. If you only want to consume up to a certain point in the list, you won't incur the database cost of looking up the other items. This could give us an example like: 1: // a sample data access object class to do standard CRUD operations. 2: public class ProductDao 3: { 4: private DbProviderFactory _factory = SqlClientFactory.Instance 5:  6: // a method that would retrieve all available products 7: public IEnumerable<Product> GetAvailableProducts() 8: { 9: // must create the connection 10: using (var con = _factory.CreateConnection()) 11: { 12: con.ConnectionString = _productsConnectionString; 13: con.Open(); 14:  15: // create the command 16: using (var cmd = _factory.CreateCommand()) 17: { 18: cmd.Connection = con; 19: cmd.CommandText = _getAllProductsStoredProc; 20: cmd.CommandType = CommandType.StoredProcedure; 21:  22: // get a reader and pass back all results 23: using (var reader = cmd.ExecuteReader()) 24: { 25: while(reader.Read()) 26: { 27: yield return new Product 28: { 29: Name = reader["product_name"].ToString(), 30: ... 31: }; 32: } 33: } 34: } 35: } 36: } 37: } The database details themselves are irrelevant. I will say, though, that I'm a big fan of using the System.Data.Common classes instead of your provider specific counterparts directly (SqlCommand, OracleCommand, etc). This lets you mock your data sources easily in unit testing and also allows you to swap out your provider in one line of code. In fact, one of the shared components I'm most proud of implementing was our group's DatabaseUtility library that simplifies all the database access above into one line of code in a thread-safe and provider-neutral way. I went with my own flavor instead of the EL due to the fact I didn't want to force internal company consumers to use the EL if they didn't want to, and it made it easy to allow them to mock their database for unit testing by providing a MockCommand, MockConnection, etc that followed the System.Data.Common model. One of these days I'll blog on that if anyone's interested. Regardless, you often have situations like the above where you are consuming and iterating through a resource that must be closed once you are finished iterating. For the reasons stated above, I didn't want to return IDataReader (that would force them to remember to Dispose it), and I didn't want to return List<Product> (that would force them to hold all products in memory) -- but the first time I wrote this, I was worried. What if you never consume the last item and exit the loop? Are the reader, command, and connection all disposed correctly? Of course, I was 99.999999% sure the creators of C# had already thought of this and taken care of it, but inspection in Reflector was difficult due to the nature of the state machines yield return generates, so I decided to try a quick example program to verify whether or not Dispose() will be called when an iterator is broken from outside the iterator itself -- i.e. before the iterator reports there are no more items. So I wrote a quick Sequencer class with a Dispose() method and an iterator for it. Yes, it is COMPLETELY contrived: 1: // A disposable sequence of int -- yes this is completely contrived... 2: internal class Sequencer : IDisposable 3: { 4: private int _i = 0; 5: private readonly object _mutex = new object(); 6:  7: // Constructs an int sequence. 8: public Sequencer(int start) 9: { 10: _i = start; 11: } 12:  13: // Gets the next integer 14: public int GetNext() 15: { 16: lock (_mutex) 17: { 18: return _i++; 19: } 20: } 21:  22: // Dispose the sequence of integers. 23: public void Dispose() 24: { 25: // force output immediately (flush the buffer) 26: Console.WriteLine("Disposed with last sequence number of {0}!", _i); 27: Console.Out.Flush(); 28: } 29: } And then I created a generator (infinite-loop iterator) that did the using block for auto-Disposal: 1: // simply defines an extension method off of an int to start a sequence 2: public static class SequencerExtensions 3: { 4: // generates an infinite sequence starting at the specified number 5: public static IEnumerable<int> GetSequence(this int starter) 6: { 7: // note the using here, will call Dispose() when block terminated. 8: using (var seq = new Sequencer(starter)) 9: { 10: // infinite loop on this generator, means must be bounded by caller! 11: while(true) 12: { 13: yield return seq.GetNext(); 14: } 15: } 16: } 17: } This is really the same conundrum as the database problem originally posed. Here we are using iteration (yield return) over a large collection (infinite sequence of integers). If we cut the sequence short by breaking iteration, will that using block exit and hence, Dispose be called? Well, let's see: 1: // The test program class 2: public class IteratorTest 3: { 4: // The main test method. 5: public static void Main() 6: { 7: Console.WriteLine("Going to consume 10 of infinite items"); 8: Console.Out.Flush(); 9:  10: foreach(var i in 0.GetSequence()) 11: { 12: // could use TakeWhile, but wanted to output right at break... 13: if(i >= 10) 14: { 15: Console.WriteLine("Breaking now!"); 16: Console.Out.Flush(); 17: break; 18: } 19:  20: Console.WriteLine(i); 21: Console.Out.Flush(); 22: } 23:  24: Console.WriteLine("Done with loop."); 25: Console.Out.Flush(); 26: } 27: } So, what do we see? Do we see the "Disposed" message from our dispose, or did the Dispose get skipped because from an "eyeball" perspective we should be locked in that infinite generator loop? Here's the results: 1: Going to consume 10 of infinite items 2: 0 3: 1 4: 2 5: 3 6: 4 7: 5 8: 6 9: 7 10: 8 11: 9 12: Breaking now! 13: Disposed with last sequence number of 11! 14: Done with loop. Yes indeed, when we break the loop, the state machine that C# generates for yield iterate exits the iteration through the using blocks and auto-disposes the IDisposable correctly. I must admit, though, the first time I wrote one, I began to wonder and that led to this test. If you've never seen iterators before (I wrote a previous entry here) the infinite loop may throw you, but you have to keep in mind it is not a linear piece of code, that every time you hit a "yield return" it cedes control back to the state machine generated for the iterator. And this state machine, I'm happy to say, is smart enough to clean up the using blocks correctly. I suspected those wily guys and gals at Microsoft engineered it well, and I wasn't disappointed. But, I've been bitten by assumptions before, so it's good to test and see. Yes, maybe you knew it would or figured it would, but isn't it nice to know? And as those campy 80s G.I. Joe cartoon public service reminders always taught us, "Knowing is half the battle...". Technorati Tags: C#,.NET

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #048

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Order of Result Set of SELECT Statement on Clustered Indexed Table When ORDER BY is Not Used Above theory is true in most of the cases. However SQL Server does not use that logic when returning the resultset. SQL Server always returns the resultset which it can return fastest.In most of the cases the resultset which can be returned fastest is the resultset which is returned using clustered index. Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT One of the Jr. Developer asked me this question (What will be the Effect of TRANSACTION on Local Variable – After ROLLBACK and After COMMIT?) while I was rushing to an important meeting. I was getting late so I asked him to talk with his Application Tech Lead. When I came back from meeting both of them were looking for me. They said they are confused. I quickly wrote down following example for them. 2008 SQL SERVER – Guidelines and Coding Standards Complete List Download Coding standards and guidelines are very important for any developer on the path of a successful career. A coding standard is a set of guidelines, rules and regulations on how to write code. Coding standards should be flexible enough or should take care of the situation where they should not prevent best practices for coding. They are basically the guidelines that one should follow for better understanding. Download Guidelines and Coding Standards complete List Download Get Answer in Float When Dividing of Two Integer Many times we have requirements of some calculations amongst different fields in Tables. One of the software developers here was trying to calculate some fields having integer values and divide it which gave incorrect results in integer where accurate results including decimals was expected. Puzzle – Computed Columns Datatype Explanation SQL Server automatically does a cast to the data type having the highest precedence. So the result of INT and INT will be INT, but INT and FLOAT will be FLOAT because FLOAT has a higher precedence. If you want a different data type, you need to do an EXPLICIT cast. Renaming SP is Not Good Idea – Renaming Stored Procedure Does Not Update sys.procedures I have written many articles about renaming a tables, columns and procedures SQL SERVER – How to Rename a Column Name or Table Name, here I found something interesting about renaming the stored procedures and felt like sharing it with you all. The interesting fact is that when we rename a stored procedure using SP_Rename command, the Stored Procedure is successfully renamed. But when we try to test the procedure using sp_helptext, the procedure will be having the old name instead of new names. 2009 Insert Values of Stored Procedure in Table – Use Table Valued Function It is clear from the result set that , where I have converted stored procedure logic into the table valued function, is much better in terms of logic as it saves a large number of operations. However, this option should be used carefully. The performance of the stored procedure is “usually” better than that of functions. Interesting Observation – Index on Index View Used in Similar Query Recently, I was working on an optimization project for one of the largest organizations. While working on one of the queries, we came across a very interesting observation. We found that there was a query on the base table and when the query was run, it used the index, which did not exist in the base table. On careful examination, we found that the query was using the index that was on another view. This was very interesting as I have personally never experienced a scenario like this. In simple words, “Query on the base table can use the index created on the indexed view of the same base table.” Interesting Observation – Execution Plan and Results of Aggregate Concatenation Queries Working with SQL Server has never seemed to be monotonous – no matter how long one has worked with it. Quite often, I come across some excellent comments that I feel like acknowledging them as blog posts. Recently, I wrote an article on SQL SERVER – Execution Plan and Results of Aggregate Concatenation Queries Depend Upon Expression Location, which is well received in the community. 2010 I encourage all of you to go through complete series and write your own on the subject. If you write an article and send it to me, I will publish it on this blog with due credit to you. If you write on your own blog, I will update this blog post pointing to your blog post. SQL SERVER – ORDER BY Does Not Work – Limitation of the View 1 SQL SERVER – Adding Column is Expensive by Joining Table Outside View – Limitation of the View 2 SQL SERVER – Index Created on View not Used Often – Limitation of the View 3 SQL SERVER – SELECT * and Adding Column Issue in View – Limitation of the View 4 SQL SERVER – COUNT(*) Not Allowed but COUNT_BIG(*) Allowed – Limitation of the View 5 SQL SERVER – UNION Not Allowed but OR Allowed in Index View – Limitation of the View 6 SQL SERVER – Cross Database Queries Not Allowed in Indexed View – Limitation of the View 7 SQL SERVER – Outer Join Not Allowed in Indexed Views – Limitation of the View 8 SQL SERVER – SELF JOIN Not Allowed in Indexed View – Limitation of the View 9 SQL SERVER – Keywords View Definition Must Not Contain for Indexed View – Limitation of the View 10 SQL SERVER – View Over the View Not Possible with Index View – Limitations of the View 11 2011 Startup Parameters Easy to Configure If you are a regular reader of this blog, you must be aware that I have written about SQL Server Denali recently. Here is the quickest way to reach into the screen where we can change the startup parameters. Go to SQL Server Configuration Manager >> SQL Server Services >> Right Click on the Server >> Properties >> Startup Parameters 2012 Validating Unique Columnname Across Whole Database I sometimes come across very strange requirements and often I do not receive a proper explanation of the same. Here is the one of those examples. For example “Our business requirement is when we add new column we want it unique across current database.” Read the solution to this strange request in this blog post. Excel Losing Decimal Values When Value Pasted from SSMS ResultSet It is very common when users are coping the resultset to Excel, the floating point or decimals are missed. The solution is very much simple and it requires a small adjustment in the Excel. By default Excel is very smart and when it detects the value which is getting pasted is numeric it changes the column format to accommodate that. Basic Calculation and PEMDAS Order of Operation Read this interesting blog post for fantastic conversation about the subject. Copy Column Headers from Resultset – SQL in Sixty Seconds #027 – Video http://www.youtube.com/watch?v=x_-3tLqTRv0 Delete From Multiple Table – Update Multiple Table in Single Statement There are two questions which I get every single day multiple times. In my gmail, I have created standard canned reply for them. Let us see the questions here. I want to delete from multiple table in a single statement how will I do it? I want to update multiple table in a single statement how will I do it? Read the answer in the blog post. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Using Node.js as an accelerator for WCF REST services

    - by Elton Stoneman
    Node.js is a server-side JavaScript platform "for easily building fast, scalable network applications". It's built on Google's V8 JavaScript engine and uses an (almost) entirely async event-driven processing model, running in a single thread. If you're new to Node and your reaction is "why would I want to run JavaScript on the server side?", this is the headline answer: in 150 lines of JavaScript you can build a Node.js app which works as an accelerator for WCF REST services*. It can double your messages-per-second throughput, halve your CPU workload and use one-fifth of the memory footprint, compared to the WCF services direct.   Well, it can if: 1) your WCF services are first-class HTTP citizens, honouring client cache ETag headers in request and response; 2) your services do a reasonable amount of work to build a response; 3) your data is read more often than it's written. In one of my projects I have a set of REST services in WCF which deal with data that only gets updated weekly, but which can be read hundreds of times an hour. The services issue ETags and will return a 304 if the client sends a request with the current ETag, which means in the most common scenario the client uses its local cached copy. But when the weekly update happens, then all the client caches are invalidated and they all need the same new data. Then the service will get hundreds of requests with old ETags, and they go through the full service stack to build the same response for each, taking up threads and processing time. Part of that processing means going off to a database on a separate cloud, which introduces more latency and downtime potential.   We can use ASP.NET output caching with WCF to solve the repeated processing problem, but the server will still be thread-bound on incoming requests, and to get the current ETags reliably needs a database call per request. The accelerator solves that by running as a proxy - all client calls come into the proxy, and the proxy routes calls to the underlying REST service. We could use Node as a straight passthrough proxy and expect some benefit, as the server would be less thread-bound, but we would still have one WCF and one database call per proxy call. But add some smart caching logic to the proxy, and share ETags between Node and WCF (so the proxy doesn't even need to call the servcie to get the current ETag), and the underlying service will only be invoked when data has changed, and then only once - all subsequent client requests will be served from the proxy cache.   I've built this as a sample up on GitHub: NodeWcfAccelerator on sixeyed.codegallery. Here's how the architecture looks:     The code is very simple. The Node proxy runs on port 8010 and all client requests target the proxy. If the client request has an ETag header then the proxy looks up the ETag in the tag cache to see if it is current - the sample uses memcached to share ETags between .NET and Node. If the ETag from the client matches the current server tag, the proxy sends a 304 response with an empty body to the client, telling it to use its own cached version of the data. If the ETag from the client is stale, the proxy looks for a local cached version of the response, checking for a file named after the current ETag. If that file exists, its contents are returned to the client as the body in a 200 response, which includes the current ETag in the header. If the proxy does not have a local cached file for the service response, it calls the service, and writes the WCF response to the local cache file, and to the body of a 200 response for the client. So the WCF service is only troubled if both client and proxy have stale (or no) caches.   The only (vaguely) clever bit in the sample is using the ETag cache, so the proxy can serve cached requests without any communication with the underlying service, which it does completely generically, so the proxy has no notion of what it is serving or what the services it proxies are doing. The relative path from the URL is used as the lookup key, so there's no shared key-generation logic between .NET and Node, and when WCF stores a tag it also stores the "read" URL against the ETag so it can be used for a reverse lookup, e.g:   Key Value /WcfSampleService/PersonService.svc/rest/fetch/3 "28cd4796-76b8-451b-adfd-75cb50a50fa6" "28cd4796-76b8-451b-adfd-75cb50a50fa6" /WcfSampleService/PersonService.svc/rest/fetch/3    In Node we read the cache using the incoming URL path as the key and we know that "28cd4796-76b8-451b-adfd-75cb50a50fa6" is the current ETag; we look for a local cached response in /caches/28cd4796-76b8-451b-adfd-75cb50a50fa6.body (and the corresponding .header file which contains the original service response headers, so the proxy response is exactly the same as the underlying service). When the data is updated, we need to invalidate the ETag cache – which is why we need the reverse lookup in the cache. In the WCF update service, we don't need to know the URL of the related read service - we fetch the entity from the database, do a reverse lookup on the tag cache using the old ETag to get the read URL, update the new ETag against the URL, store the new reverse lookup and delete the old one.   Running Apache Bench against the two endpoints gives the headline performance comparison. Making 1000 requests with concurrency of 100, and not sending any ETag headers in the requests, with the Node proxy I get 102 requests handled per second, average response time of 975 milliseconds with 90% of responses served within 850 milliseconds; going direct to WCF with the same parameters, I get 53 requests handled per second, mean response time of 1853 milliseconds, with 90% of response served within 3260 milliseconds. Informally monitoring server usage during the tests, Node maxed at 20% CPU and 20Mb memory; IIS maxed at 60% CPU and 100Mb memory.   Note that the sample WCF service does a database read and sleeps for 250 milliseconds to simulate a moderate processing load, so this is *not* a baseline Node-vs-WCF comparison, but for similar scenarios where the  service call is expensive but applicable to numerous clients for a long timespan, the performance boost from the accelerator is considerable.     * - actually, the accelerator will work nicely for any HTTP request, where the URL (path + querystring) uniquely identifies a resource. In the sample, there is an assumption that the ETag is a GUID wrapped in double-quotes (e.g. "28cd4796-76b8-451b-adfd-75cb50a50fa6") – which is the default for WCF services. I use that assumption to name the cache files uniquely, but it is a trivial change to adapt to other ETag formats.

    Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >