Search Results

Search found 10844 results on 434 pages for 'device mapper'.

Page 85/434 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• Unable to make sound play in headset

  - by user50849

  Top right, I click the sound icon, select sound settings, and connect my USB-headset. I can them see the headset being detected as it pops up in the menu. I click it, and expect the currently played audio to get sent to the headset instead. My problem is that it does not. The audio keeps playing through the built-in speakers. More info: The icon for my built-in card in the sound settings is a circuit with a note symbol on top. The symbol for the headset is just black background with a "No" symbol on it. Might mean it doesn't work somehow. I installed pavucontrol, and notice that no second sound card shows up in there. When connecting, the syslog says Jun 20 09:38:46 yuna kernel: [40144.553431] usb 2-1.2: new full-speed USB device number 11 using ehci_hcd Jun 20 09:38:46 yuna kernel: [40144.650609] input: C-Media USB Headphone Set as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.3/input/input20 Jun 20 09:38:46 yuna kernel: [40144.650895] generic-usb 0003:0D8C:000C.000B: input,hidraw0: USB HID v1.00 Device [C-Media USB Headphone Set ] on usb-0000:00:1d.0-1.2/input3 Jun 20 09:38:46 yuna mtp-probe: checking bus 2, device 11: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2" Jun 20 09:38:46 yuna mtp-probe: bus: 2, device: 11 was not an MTP device

  Read the article

• Where can I get a splitter to connect a device with a single 3.5 mm plug into the audio input/output jacks on my laptop?

  - by XinJeisan

  I recently bought the :Hype Retro Handset for Mobile Phone" -- its just a device that looks like a handset to use when chatting on a computer or mobile phone that plugs into the phone/computer with a single 3.5 mm plug. I was hoping to use it on my windows 7 Toshiba laptop. I can hear audio fine through the handset but what I'm saying is not being picked up on the handset. On the box it says "some phones and computers may need additional adapters," so I'm hoping it is possible to get a splitter or something for this to work properly. I did email the parent company (http://dglusa.com/) but I haven't heard from them, and, looking over their website, I doubt I will. I also went to the local radio shack, and the guy said I needed a splitter, but he didn't know where to get one. I can find the kind of splitter I think I need online, but I'm unsure whether they are just for output or can also do input/output.

  Read the article

• How can I make Banshee re-encode FLAC to Ogg Vorbis when copying to my player?

  - by Michael E

  I have most of my music in FLAC on my large storage device, and would like to automatically re-encode it in Ogg Vorbis when copying it to my portable audio player (Sansa Fuze v2). I have set my Fuze to MTP mode and told Banshee to encode to Ogg Vorbis with quality 4 in the Device Properties dialog for the Fuze (I would use MSC mode, but don't have an encoding option in the device properties when I do that). However, when I copy music to the device, either by dragging it from the music library or by syncing a playlist, the full FLAC files are copied rather than transcoded and written as Oggs. How can I get my Banshee setup re-encoding the audio? If StackExchange supported bonus points, I'd give bonus points for a solution that only re-encoded music that was already losslessly encoded, but I don't think that's possible.

  Read the article

• Not enough components to start the RAID array?

  - by urig

  I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. Unfortunately, Ubuntu has not been able to mount the drive automatically. Having started up Disk Utility I see the drive as a multi disk device called "Array (Array)" showing Metadata Version 0.90.0. The device state is: "Not Running, not enough components to start". When I click the "Start RAID Array" button I get an error saying: "Not enough components to start the RAID array". Can you please tell me which components are missing and how to install them to get access to the drive's filesystem?

  Read the article

• Can't access to access to my web server inside a network with Firewall on

  - by ianenri

  I set up a Web server with the following: There is the Internet Router, configured to Port Foward port 80 to my computer assigned to my PC's IP: 192.168.1.128 My PC is connected to that wireless router from wlan0 Then, my PC is also connected to my device (which is the webserver) with a crossover-cable usign eth0 having this anohter IP: 10.42.43.1 Finally, my device (the webserver) is connected with eth0 with this IP: 10.42.43.55 As you can see, I need to install a reverse-proxy to be able to resolve to my device's webserver. I installed pound (proxy server) in my PC and configured properly to make 192.168.1.128 resolve to 10.42.43.55 So, I just typing my ISP provided IP 200.x.x.x resolves to my device webserver. But there's a problem: I HAD TO STOP MY FIREWALL. I don't know how I need exactly configure the firewall in SUSE YAST2, or at least iptables. Stopping it is not an option, not for security reasons, just because there's port fowarding rule that is needed to give Internet access to my device too. I'm using openSUSE 12.1

  Read the article

• How to enable a CD/DVD drive? It is not listed in "My Computer"

  - by Senthil

  I just got a laptop from a friend. The CD/DVD drive is not present in "My Computer". But the tray comes out when I press the button and everything. I remember long time ago, enabling it by changing some registry value, but I forgot which one. I have administrator privileges. I can see it in the device manager. But it has a yellow exclamation icon on it. My OS: Windows XP SP3 In Device Manager, inside the properties window for this device, the following error is shown in the "Device Status" box. A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32) How do I enable my CD/DVD drive?

  Read the article

• What is the "real" difference between a NAS and NFS? Or, why pick a NAS device over "mere" NFS?

  - by warren

  From an end-user perspective, what is the difference between a NAS device and using NFS exports from a file server? They seem to accomplish the same end result. The difference between a SAN and other file storage is related (in my experience) to how they are connected to the server infrastructure. However, the difference between a NAS, connecting over a standard ethernet port, and NFS (sharing storage off specific servers, also over the network), seems more nebulous. Is there a good reason to pick a NAS filer over just running NFS on servers?

  Read the article

• Building Enterprise Smartphone App &ndash; Part 3: Key Concerns

  - by Tim Murphy

  This is part 3 in a series of posts based on a talk I gave recently at the Chicago Information Technology Architects Group.  Feel free to leave feedback. Keys Concerns Of Smartphones In The Enterprise These are the factors that you need to be aware of and address in order to build successful enterprise smartphone applications.  Most of them have nothing to do with the application itself as you will see here. Managing Devices Managing devices is a factor that is going to effect how much your company will have to spend outside of developing the applications.  How will you track the devices within the corporation?  How often will you have to replace phones and as a consequence have to upgrade your applications to support new phones?  The devices can represent a significant investment of capital.  If these questions are not addressed you will find a number of hidden costs throughout the life of your solution. Purchase or BYOD We have seen the trend of Bring Your Own Device (BYOD) lately within the enterprise.  How many meetings have you been in where someone is on their personal iPad, iPhone, Android phone or Windows Phone?  The issue is if you can afford to support everyone's choice in device? That is a lot to take on even if you only support the current release of each platform. Do you go with the most popular device or do you pick a platform that best matches your current ecosystem and distribute company owned devices?  There is no easy answer here, but you should be able give some dollar value to both hardware and development costs related to platform coverage. Asset Tracking/Insurance Smartphones are devices that are easier to lose or have stolen than laptops and desktops. Not only do you have your normal asset management concerns but also assignment of financial responsibility. You also will need to insure them against damage and theft and add legal documents that spell out the responsibilities of the employees that use these devices. Personal vs. Corporate Data What happens when you terminate an employee?  How do you recover the device?  What happens when they have put personal data on the device?  These are all situation that can cause possible loss of corporate intellectual property or legal repercussions of reclaiming a device with personal data on it.  Policies need to be put in place that protect the company from being exposed to type of loss.  This can mean significant legal and procedural cost that you need to consider. Coming Up In the last installment of this series I will cover application development considerations. del.icio.us Tags: Smartphones,Enterprise Smartphone Apps,Architecture

  Read the article

• How can I increase resolution when impossible to set up nvidia driver?

  - by Asimov4

  I was stuck at 1024x758 before creating an /etc/X11/xorg.conf file as follows which works well to allow me to have a resolution of 1920x1200 with the vesa driver. Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Monitor" Identifier "Configured Monitor" HorizSync 24.0 - 83.0 VertRefresh 50.0 - 75.0 EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Viewport 0 0 Depth 24 Modes "1920x1200" EndSubSection EndSection But now my display is kind of slow. I have an NVIDIA GeForce 8600GT but really cannot find how to set up the driver to work. Are there any alternatives to VESA that would work faster?

  Read the article

• Lenovo ThinkPad W530 problem to activate the optical/DVD drive

  - by Marko Apfel

  Problem Sometimes my notebook shows the optical drive as power off: But the hint there is not changing this state. Solution By looking in the device manager you see the next problem: So open the properties via right mouse click. This gives you the hint to remove the drive first. “Windows cannot use this hardware device because it has been prepared for "safe removal", but it has not been removed from the computer. (Code 47)” Whether you select the comment by dragging the mouse over the the hidden part or pressing the button “Properties”. So we unplug and reinsert the ultrabay. If you think, now the system is working – you are wrong. Now the system is the meaning, that the ultrabay is unplugged. You could verify this by refresh the view in the device panel. Now there is no longer our device. Yet your great gig comes – unplug the ultra bay and reinsert it a second time! After this you could hear with a media inside, that the motor is really started and we have a working device What a difficult birth …

  Read the article

• jQuery Mobile Frame Forwarding [on hold]

  - by Nizam

  I have a site that does a standard forward to another site [301 Redirect]. In the redirected site, I detect if the device is a mobile using the following code: if (/Android|webOS|iPhone|iPad|iPod|BlackBerry/i.test(navigator.userAgent)) { window.location.replace("Mobile/Login/Login.aspx") } else { window.location.replace("Apps/Login/Login.aspx") } It works and jQuery mobile makes the site fits device very well. To do so, I use the following code in ASPX page: <meta name="viewport" content="width=device-width, initial-scale=1, maximum-scale=1" /> The problem is that I am wanting to frame forward - instead of standard forward - (there are a lot of advantages), but the site is not fitted for the device anymore, and even the icon I have chosen for my page is not well defined anymore. The code I use to set the icon of page is: <link rel="apple-touch-icon" href="../../Apps/Imagens/Icone.png" /> My site is hosted by Mochahost My question is: Is there anything I could do to make it works?

  Read the article

• Can I lvreduce after lvextend without losing the ext4 partition inside it?

  - by DrSAR

  In a botched attempt to move my root partition from one disk to another I have done the following: added new disk partitioned it with parted (part #3 is now almost totally filling the disk) initialized a physical volume $ pvcreate /dev/sdb3 Physical volume "/dev/sdb3" successfully created extended the volume group to include this new physical disk $ vgextend myvg /dev/sdb3 Volume group "myvg" successfully extended extended the logical volume (I think this is where I ballsed it up: I think I should have pvmove'ed stuff to the new pv in that group - can someone confirm?) $ lvextend /dev/mapper/myvg-root /dev/sdb3 I would now like to undo the lvextend and then proceed with the original plan of moving the content of the old physical volume over to the new physical volume. Can I reduce the logical volume (I have not yet touched the ext4 partition that sits in /dev/mapper/myvg-root with something like resizefs) without fear of damaging the ext4 filesystem? If so, how do I tell it to reduce by exactly the right amount? $ lvreduce --by-exactly-the-amount-occupied-by-PV /ev/sdb3 /dev/mapper/myvg-root

  Read the article

• designing solution to dynamically load class

  - by dot

  Background Information I have a web app that allows end users to connect to ssh-enabled devices and manipulate them. Right now, i only support one version of firmware. The logic is something like this: user clicks on a button to run some command on device. web application looks up the class name containing the correct ssh interface for the device, using the device's model name. (because the number of hardware models is so small, i have a list that's hardcoded in my web app) web app creates a new ssh object using the class loaded in step 2. ssh command is run and session closed. command results displayed on web page. This all works fine. Now the end user wants me to be able to support multiple versions of firmware. But the catch is, they don't want to have to document the firmware version anywhere becuase the amount of overhead this will create in maintaining the system database. In other words, I can't look up the firmware version based on the device. The good news is that it sounds like at most, I'll have to support two different versions of firmware per device. One option is to name the the classes like this: deviceX.1.php deviceX.2.php deviceY.1.php deviceY.2.php where "X" and "Y" represent the model names, and 1 and 2 represent the firmware versions. When a user runs a command, I will first try it with one of the class files, if it fails, i can try with the second. I think always try the newer version of firmware first... so let's say in the above example, I would load deviceX.2.php before deviceX.1.php. This will work, but it's not very efficient. But I can't think of another way around this. Any suggestions?

  Read the article

• How do I get 12.04 to recognize swap partition so that I can hibernate?

  - by Kayla

  I justed installed 12.04 and used gparted to erase and enlarge my swap partition. When I rebooted, gparted said that the file partition for the swap was unknown. Gparted doesn't let me change the file partition to "linux-swap". It does let me change it to NTFS, but when I reboot, it goes back to "unknown". Thanks in advance for your help. Output from sudo swapon -s: Filename Type Size Used Priority /dev/mapper/cryptswap1 partition 9025532 0 -1 Output from sudo fdisk -l: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x9d63ac84 Device Boot Start End Blocks Id System /dev/sda1 * 2048 2459647 1228800 7 HPFS/NTFS/exFAT /dev/sda2 2459648 197836472 97688412+ 7 HPFS/NTFS/exFAT /dev/sda3 466890752 488395119 10752184 7 HPFS/NTFS/exFAT /dev/sda4 197836798 466890751 134526977 5 Extended /dev/sda5 197836800 448837631 125500416 83 Linux /dev/sda6 448839680 466890751 9025536 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mapper/cryptswap1: 9242 MB, 9242148864 bytes 255 heads, 63 sectors/track, 1123 cylinders, total 18051072 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x951b7f53 Disk /dev/mapper/cryptswap1 doesn't contain a valid partition table

  Read the article

• Native DLL for GPS communication

  Giving full control over the communication with GPS device in limited environment

  Read the article

• Is is OK to use a non-primary key as the id in a rails resource?

  - by nPn

  I am getting ready to set up a resource for some new api calls to my rails application. I am planning on calling the resource devices ie resources :devices This is going to represent a android mobile devices I know this will get me routes such as GET devices/:id In most cases :id would be an integer representing the primary key, and in the controller we would use :id as such: GET devices/1 @device = Device.find(params[:id]) In this case I would like to use :id as the google_cloud_messaging_reg_id So I would like to have requests like this: GET devices/some_long_gcm_id and then in the controller , just us params[:id] to look up the device by the gcm registration id. This seem more natural, since the device will know it's gcm id rather than it's rails integer id. Are there any reasons I should avoid doing this?

  Read the article

• how httpregistryfilter() in blackberry works?how to use [closed]

  - by Sowjanya

  i am trying to start my application using an url in my device browser. for this i used this: HttpFilterRegistry.registerFilter("www.atsas23.com","com.rim.samples.device.push"); Here this method will registry my application with www.atsas23.com and the second one will call the protocol class ,which is their in com.rim.samples.device.push. Now after doing ,still i am not getting .Means my app is not opening in browser.Can anybody tell why my application is not registering.what is going wrong.

  Read the article

• iPhone 4.0 on iPhone but still Ad-Hoc compile for 3.1.3?

  - by Mark

  Device: Version : 3.1 Build: 3511 Device: iPhone OS: iPhone OS 4.0 xCode 3.2.2 (Old) xCode 3.2.3 (New; For iPhone 4.0 Beta) Background: As you can see I installed 4.0 on my iPhone as I read on this forum it's really hard to near impossible to downgrade back to 3.1.3, but it's my only device I have and use for development. When I try to continue to develop and build with the old xCode it tells me that "No provisioned iPhone OS device is connected". When I select Simulator it does compile and build, however when I spread this file it does not work on the devices of my testers, they get a Signed error. When I run the new xCode, it does compile and build on the Device and when I spread this file, it does work on the devices of my testers (which are running the current official version 3.1.3). Questions: Why is there a difference between building for Simulator and Device? A simulator build never seem to work on the devices of my testers because of signing issues and the build for device does work. Currently it seems the old xCode became useless, however I read that you may not use the Beta xCode to build your application for release. So knowing the above how am I able to pull this off with my current setup due the fact the old xCode won't let me build properly.

  Read the article

• Modelling problem - Networked devices with commands

  - by Schneider

  I encountered a head scratching modelling problem today: We are modelling a physical control system composed of Devices and NetworkDevices. Any example of a Device is a TV. An example of a NetworkDevice is an IR transceiver with Ethernet connection. As you can see, to be able to control the TV over the internet we must connect the Device to the NetworkDevice. There is a one to many relationship between Device and NetworkDevice i.e. TV only has one NetworkDevice (the IR transceiver), but the IR transceiver may control many Devices (e.g. many TVs). So far no problem. The complicated bit is that every Device has a collection of Commands. The type of the Command (e.g IrCommand, SerialCommand - N.B. not currently modelled) depends on the type of NetworkDevice that the Device is connected to. In the current legacy system the Device has a collection of generic Commands (no typing) where fields are "interpreted" depending on the NetworkDevice type. How do I go about modelling this in OOP such that: You can only ever add a Command of the appropriate type, given the NetworkDevice the Device is attached to? If I change the NetworkDevice the Commands collection changes to the appropriate type Make it so the API is simple/elegant/intuitive to use

  Read the article

• JMF microphone volume controller

  - by TacB0sS

  How to obtain the Microphone volume controller in JMF? this is what I have: I tried this implementation concept of yours, but I keep getting a null from the first volume processor when I try to get the stream, here is how I do it: // the device is the media device specifically audio Processor processorForVolume = Manager.createProcessor(device.getLocator()); // wait until configured ProcessorStates newState = new ProcessorStateListener(Processor.Configured).waitForProcessorState(processorForVolume); System.out.println("volumeProcessorState: "+newState); // setting the content descriptor to null - read in another thread this allows to get the gain control processorForVolume.setContentDescriptor(null); // set the track control format to one supported by the device and the track control. // I didn't match it to an RTP allowed format, but I don't think this has anything to do with it... TrackControl[] trackControls = processorForVolume.getTrackControls(); if (trackControls.length == 0) throw new MC_Exception("No track controls where found for this device:", new Object[]{device}); for (TrackControl control : trackControls) trackManipulator.manipulateTrackControls(control); // wait until the processor is realized newState = new ProcessorStateListener(Controller.Realized).waitForProcessorState(processorForVolume); System.out.println("volumeProcessorState: "+newState); // receives the gain control micVolumeController = processorForVolume.getGainControl(); // cannot get the output stream to process further... any suggestions? processor = Manager.createProcessor(processorForVolume.getDataOutput()); new ProcessorStateListener(Processor.Configured).waitForProcessorState(processor); processor.setContentDescriptor(DeviceCapturingManager.RAW_RTP); new ProcessorStateListener(Controller.Realized).waitForProcessorState(processor); this is the output It generates: volumeProcessorState: Configured format set to track control - com.sun.media.ProcessEngine$ProcTControl@1627c16: LINEAR, 48000.0 Hz, 16-bit, Stereo, LittleEndian, Signed volumeProcessorState: Realized and the data output from the processor is Null. I should make clear that when the content descriptor != null I do get an output stream but not the volume controller, and the when it is null I get the controller, but no stream. I try to connect to an audio microphone device Adam.

  Read the article

• How should I configure grub for booting linux kernel from a USB hard drive?

  - by skolima

  I have a laptop hard drive in an external enclosure which I use as a large pendrive. For an added twist, I have installed Linux on it, so I can boot any machine with my distribution of choice (e.g. for data recovery or repairing a b0rked system or just using a borrowed laptop without destroying the preinstalled Windows). The problem is that, depending on the hardware configuration, the USB hard drive may be visible under different paths. For grub configuration I just use (hda0,0) as it is relative to the device the grub was launched from. I have UUID entries in /etc/fstab. I also specify rootwait in the kernel parameters so that it waits for the USB subsystem to settle down before trying to mount the device. What should I pass to the kernel as root= ? Currently boot from the pendrive once, check the debug messages to see what /dev/sdX device has been assigned to the USB drive by the kernel, then reboot and edit the grub configuration. I can't change anything on the PC besides enabling Boot from USB hard drive in BIOS and setting it to higher priority than internal hard drives. There are various initrd generating scripts which include support for UUID in root device path, unfortunately the Gentoo native one (genkernel) does not support rootwait and I had no luck trying to use others. The boot process goes like this (it is quite similar in Windows): The BIOS chooses the boot device and loads whatever is its MBR (which happens to be grub stage-1). Grub loads it's configuration and stage-2 files from device it has set as root, using (hd0) for the device it was loaded from by BIOS. Grub loads and starts a kernel (still the same numbering, so I can use (hd0,0) again ). Kernel initializes all built-in devices (rootwait does it's magic now). Kernel mounts the partition it was passed as root (this is a kernel parameter, not grub parameter). init.d starts the userland booting process, including mounting things from /etc/fstab. Part 5 is the one giving me problems.

  Read the article

• WinUSB failing on non-development computers

  - by Giawa

  Good afternoon, WinUSB is working well on the development computer that I am using (Win XP SP3). I am able to download new firmware to the Cypress FX2, and then connect to the new USB device once it 'renumerates'. However, if I've tried the same code with the WinUSB driver on a few other computers (Win XP SP3, Win7 x64) and they both returned the error "A device attached to the system is not functioning." when trying to use CreateFile to get a handle to the USB device. The devicePath was found successfully, so I'm not sure why it cannot connect to the device. Furthermore, the device manager states that my device is working properly. I'm curious if I'm missing something when compiling the code? I would guess that my development computer has something installed on it that the other computers do not? Or perhaps it's a power setting and the device is going to sleep (although I've fooled around with the Power Options on each computer to no avail). Does anyone have any ideas? I've compiled under Visual Studio 2008, and have installed the Microsoft C++ 2008 Redistributable Package on the computers that I've tested on. Thanks, Giawa

  Read the article

• java.lang.NoClassDefFoundError thrown with my own packages in Android 1.5

  - by TiGer

  Hi, I have developed an application which has several packages within it's project... A class in one of those packages is called right away in the first line of code, which throws the dreaded java.lang.NoClassDefFoundError error... I don't get it, the package simply is within the project, and it works fine on my Android 1.6 device, but won't work with my 1.5 device... I do have to say that the project was originally set for 1.6, but then I changed the within the manifest from 4 to 3... Is that bad practice ? Or maybe it has nothing to do with the platform version ? Also I do get these lines as wel from the DDMS : 05-04 17:24:59.921: WARN/dalvikvm(2041): VFY: unable to resolve static field 2 (MANUFACTURER) in Landroid/os/Build; 05-04 17:24:59.921: WARN/dalvikvm(2041): VFY: rejecting opcode 0x62 at 0x0034 05-04 17:24:59.921: WARN/dalvikvm(2041): VFY: rejected Lmobilaria/android/managementModule/Management;.getDeviceSpecifics ()V 05-04 17:24:59.921: WARN/dalvikvm(2041): Verifier rejected class Lmobilaria/android/managementModule/Management; Thats the ManagementModule which also tries to retrieve several info-fields of the device itself... Again, this works just fine on the 1.6 device, even though thats a development device whilst my 1.5 device is a non-development device...

  Read the article

• ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

  - by GruffTech

  Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >