Search Results

Search found 10844 results on 434 pages for 'device mapper'.

Page 91/434 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • Switch from encrypted partition to unencrypted (Error: cryptsetup: evms_activate is not available)

    - by Chris Lercher
    I initially installed Ubuntu 11.04 with an encrypted file system (from the alternate install CD: Guided Partitioning, LVM encrypted). Now I wanted to change this setup to have my root file system on an unencrypted partition. I had the following setup before: /dev/mapper/my-root on / type ext4 (rw,noatime,errors=remount-ro,commit=0,commit=0) /dev/sda1 on /boot type ext2 (rw,noatime) I backed up /, reformatted /dev/sda5 (which had contained the encrypted LVM device) to an ext3 partition, and restored / to that partition. I edited /etc/fstab, removed the line /dev/mapper/my-root / ..., and added the line: /dev/sda5 / ext3 noatime,rw,errors=remount-ro,commit=0 0 1 I edited /etc/crypttab, and commented out the single entry. On reboot, I get the grub screen as usual, but then I get the message cryptsetup:evms_activate is not available, waiting for encrypted source device. I tried reinstalling Grub2 using a LiveCD with the ChRoot method, but that didn't make any difference. Why is Ubuntu still searching for an encrypted device?

    Read the article

  • HDMI sound gone, can't figure out how to turn it back on

    - by Oli
    I have had an Acer Revo box as a media centre for a while. I recently installed Ubuntu Server (10.10) on it and polished it up with nodm (one of the most simple ways to launch an X session) and installed boxee. It's been working fine for over a month. It's just running ALSA. I've had problems with PulseAudio/Boxee/HDMI before so I wanted to keep it simple. And that worked. It pushed both PCM and digital (AAC and various Dolby codecs) over HDMI perfectly. But I restarted it the other day after mucking around with some nfs configuration and now there isn't any sound. The hardware is an ION chipset. Nvidia 9400M graphics with Nvidia MCP79/7A audio. One thing I have noticed is there doesn't appear to be any sign of a IEC958 device. A traditional fix in the past for fresh installs has been to load alsamixer, find the IEC device and toggle its mute but I can't. I'm certain this used to represent the HDMI output. It just doesn't seem to exist any more unless I run sudo alsa-utils restart while boxee is running, when I see it in an error message: * Shutting down ALSA... [ OK ] * Setting up ALSA... * warning: 'alsactl restore' failed with error message 'alsactl: set_control:1388: Cannot write control '2:0:0:IEC958 Playback Default:0' : Operation not permitted'... ...done. When nodm (and thus boxee) aren't running, I don't see this error but alsamixer still doesn't show the IEC channel. aplay -l gives: card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 0/1 Subdevice #0: subdevice #0 Its section in lshw reads: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:22 memory:fae78000-fae7bfff I was running on the stock PAE kernel but now it's running on 2.6.37.1. I upgraded to see if that fixed things; it didn't. I'm considering a reinstall but I hate doing that because a) there's a bit of custom configuration in getting X and Boxee to start on boot and b) I don't know what the problem is. If I reinstall this time, I'll end up doing that every time the sound breaks. I love Ubuntu but I don't want to install it once a month. Is there any way to forcibly reset all alsa settings and restart from scratch (without doing a reinstall)? Any other tips? If you need more information, just ask.

    Read the article

  • Ubuntu 12.04 share the internet over WiFi from wvdial?

    - by Sour Lemon
    I have just installed Ubuntu 12.04 on a separate partition on my hard drive so I can dual boot to either Windows 7 or Ubuntu. I am living in Japan and so I'm using a mobile broadband USB device called "Softbank C02LC". By default it seems that this device isn't recognised so I did the following: Terminal: sudo su nano /usr/bin/usbModemScript Nano: #!/bin/bash echo 1c9e 9900 > /sys/bus/usb-serial/drivers/option1/new_id Terminal: chmod +x /usr/bin/usbModemScript nano /etc/udev/rules.d/option.rules Nano: ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/usr/bin/usbModemScript" ATTRS{idVendor}=="1c9e", ATTRS{idProduct}=="9900", RUN+="/sbin/modprobe option" which made the device visible from the network manager etc. However even though I set up my details correctly when I created a new connection (Correct username, APN etc) as soon as I try to connect it almost immediately disconnects. Because of this I then followed the instructions at this site: http://debugitos.main.jp/index.php?Ubuntu%2F%A5%E2%A5%D0%A5%A4%A5%EB%A5%A4%A5%F3%A5%BF%A1%BC%A5%CD%A5%C3%A5%C8 And I ended up using the c02lc_connect script at the bottom of the page to connect to the internet. The file contains the following bash script: #!/bin/sh usbinterfece=/dev/ttyUSB2 VID=1c9e PID=9900 WRONG_PID=f000 LSUSB=/usr/sbin/lsusb GREP=/bin/grep MODPROBE=/sbin/modprobe SWITCH=/usr/sbin/usb_modeswitch SWITCH_D=/etc/usb_modeswitch.d WVDIAL=/usr/bin/wvdial SLEEP=/bin/sleep SUDO=/usr/bin/sudo WHICH=/usr/bin/which switch_config="$SWITCH_D/$VID:$WRONG_PID" if ! [ -x $WVDIAL -a -x $SWITCH ]; then echo "Install wvdial and usb_modeswitch." exit 0 fi check_usb() { local vid="$1" local pid="$2" ($LSUSB | $GREP "$vid:$pid") } if ! (check_usb "$VID" "$PID"); then echo "Cannot find modem device..." if (check_usb "$VID" "$WRONG_PID") && ( [ -f "$switch_config" ] ); then echo "The device is attached but its mode is wrong." echo "Try usb_modeswitch..." $SUDO $SWITCH -c "$switch_config" $SLEEP 1 if (check_usb "$VID" "$PID"); then echo "Successfully switched the mode." else echo "Failed to switch the mode..." exit 1 fi else exit 1 fi fi if [ ! -c "$usbinterface" ]; then $SUDO $MODPROBE usbserial vendor=0x$VID product=0x$PID $SLEEP 2 fi $SUDO $WVDIAL which works completely fine - no problems what-so-ever. But we also have 1 more laptop here which I need to share the internet connection with. In Windows 7 I do this with the Connectify program, and in Ubuntu I have seen that you can do things like set up hotspots etc. But because I am using WvDial I am not sure how I would share the internet. I am only beginning to use Ubuntu but unfortunately until I can figure out how to share the internet over WiFi when connected via WvDial I have to stick with Windows. If you have any ideas on how to do this it would be much appreciated!

    Read the article

  • How to switch off wifi on startup or from the console

    - by mit
    I have installed ubuntu 10.04 on a laptop. Wifi is switched on by default on startup. I can disable it rightclicking the network manager icon in the gnome bar. How can I set it to have wifi switched off as default? Alternatively, how can I switch off wifi on the console? I tried already the rfkill command but it does not list any devices and it does not switch off wifi, I tried different parameters. This is a standard install of the Ubuntu 10.04 i386 Desktop Live CD on an IBM T40 Laptop. EDIT A: This is the output of some rfkill commands on my system, and it does not affect the wifi of the laptop: $ rfkill --help Usage: rfkill [options] command Options: --version show version (0.4) Commands: help event list [IDENTIFIER] block IDENTIFIER unblock IDENTIFIER where IDENTIFIER is the index no. of an rfkill switch or one of: <idx> all wifi wlan bluetooth uwb ultrawideband wimax wwan gps fm $ rfkill list $ rfkill list wifi $ rfkill list all $ rfkill list wlan $ sudo rfkill list all $ sudo rfkill block all $ sudo rfkill block wlan $ sudo rfkill block wifi $ EDIT B: Now I found out that sudo ifconfig eth1 down turns it off. And I can turn it on through the gnome network applet again. But the applet does not reflect the change from the commandline, it stills believes wifi is switched on. I have to switch it off and on again on the applet to switch it on again, when I switched it off from the console. Is there a better way? This is what the syslog looks like when I switch wireless off and on again from the network manager: NetworkManager: <info> (eth1): device state change: 3 -> 2 (reason 0) NetworkManager: <info> (eth1): deactivating device (reason: 0). NetworkManager: <info> Policy set '24' (eth0) as default for routing and DNS. NetworkManager: <info> (eth1): taking down device. avahi-daemon[660]: Withdrawing address record for fe80::202:8aff:feba:d798 on eth1. kernel: [ 971.472116] airo(eth1): cmd:3 status:7f03 rsp0:0 rsp1:0 rsp2:0 NetworkManager: <info> (eth1): bringing up device. NetworkManager: <info> (eth1): supplicant interface state: starting -> ready NetworkManager: <info> (eth1): device state change: 2 -> 3 (reason 42) avahi-daemon[660]: Registering new address record for fe80::202:8aff:feba:d798 on eth1.*. kernel: [ 965.512048] eth1: no IPv6 routers present

    Read the article

  • Failed to start up after upgrading software

    - by Landy
    I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

    Read the article

  • How to modify grub entry for supporting KGDB kernel image?

    - by Nishant
    I am trying to update target m/c grub.cfg file for KGDB setup but while booting the m/c it got hung completely and not asking/waiting for remote gdb connection. Following is the entry which I added:- menuentry 'Ubuntu, with Linux 2.6.32-24-kgdb' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 12878c3b-c553-4b4b-986a-6e32daea3ad1 linux /vmlinuz-2.6.32-kgdb root=/dev/mapper/ubuntu-root ro kgdbwait [email protected]/,@192.168.140.158/ quiet initrd /initrd.img-2.6.32-24-server } I have also compiled and copied /boot/vmlinuz-2.6.15.5-kgdb & /boot/System.map-2.6.15.5-kgdb to target m/c from devlopement m/c. STD entry before adding KGDB in grub.cfg was:- menuentry 'Ubuntu, with Linux 2.6.32-24-server' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 12878c3b-c553-4b4b-986a-6e32daea3ad1 linux /vmlinuz-2.6.32-24-server root=/dev/mapper/ubuntu-root ro quiet initrd /initrd.img-2.6.32-24-server } Please suggest how to get rid of this problem.

    Read the article

  • Failed to start up after upgrading software in ubuntu 10.10

    - by Landy
    I asked this question in SuperUser one hour ago, then I know this community so I moved the question here... I've been running Ubuntu 10.10 in a physical x86-64 machine. Today Update Manager reminded me that there are some updates to install and I confirmed the action. I should had read the update list but I didn't. I can only remember there is an update about cups. After the upgrading, Update Manager requires a restart and I confirmed too. But after the restart, the computer can't start up. There are errors in the console. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. [xxx]usb 1-8: new high speed USB device using ehci_hcd and address 3 [xxx]usb 2-1: new full speed USB device using ohci_hcd and address 2 [xxx]hub 2-1:1.0: USB hub found [xxx]hub 2-1:1.0: 4 ports detected [xxx]usb 2-1.1: new low speed USB device using ohci_hcd and address 3 Gave up waiting for root device. Common probles: - Boot args (cat /proc/cmdline) - Check rootdelay=(did the system wait long enough) - Check root= (did the system wait for the right device?) - Missing modules (cat /proc/modules; ls /dev) FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.35-22-generic/modules.dep: No such file or directory ALERT! /dev/sda1 does not exist. Dropping to a shell! BusyBox v1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell(ash) Enter 'help' for a list of built-in commands. (initramfs)[cursor is here] At the moment, I can't input anything in the console. The keyboard doesn't work at all. What's wrong? How can I check boot args or "root=" as suggested? How can I fix this issue? Thanks. =============== PS1: the /dev/sda1 is type ext4 (rw,nosuid,nodev) PS2: the /dev/sda1 can be mounted and accessed successfully under SUSE 11 SP1 x64. PS3: From this link, I think the keyboard doesn't work because the USB driver is not loaded at that time.

    Read the article

  • Installing linux on OCZ RevoDrive3 x2

    - by user2101712
    First of all, here is the configuration of my computer: Motherboard: Asus H87Plus RAM: Corsair Vengeance 32GB Processor: Intel i7 4770 Drive: OCZ RevoDrive 3 x2 (240 GB) (OCZ Revodrive3 is a PCIe module) I am trying to install the latest version of Ubuntu Desktop (13.10). The problem is that in the UEFI (bios) the drive shows up as a 240 GB drive, but in the Ubuntu installer it shows up as two 120 GB drives. If I install Ubuntu in any of these two drives, it never boots. The screen flickers a few times and comes back to the UEFI menu. I have tried reading up and have come across information that the drive has a "fakeraid", and the solution is to use dmraid. However, when I give the following commands in the terminal (from live CD): # modprobe dm_mod # dmraid -ay it says: no raid disks. And the following command: # ls -la /dev/mapper/ just shows /dev/mapper/control How can I install Ubuntu on my computer? what is the correct method?

    Read the article

  • How do you repair an "input/output error" in an NTFS partition?

    - by Calixte
    I replaced a buggy Windows Vista installation with Ubuntu. All works fine except that the mais harddrive where I had all my files are now inaccessible. Here is the eror message I get: Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details Is it necessarily a hardware problem? If not, is there a way to repair the HD from Ubuntu?

    Read the article

  • Problem reinstall GRUB2

    - by Caustic
    I tried to upgrade from 12.04 - 12.10. The install seemed to go well but upon reboot, I get the grub recovery console. I tried to reinstall using the boot-repair Boot Repair which usually works a treat. However this time it says it is scanning my HDD and never recovers. When I try to reinstall grub using the old grub-install <dir> <dev> --recheck --debug &> gruboutput.txt I get this Pastebin link I think it should be installing to dev/mapper/isw_gbaaebhfe_Volume0 even when I made -- dev/mapper/isw_gbaaebhfe_Volume3 Any help would be appreciated

    Read the article

  • hi, i have a problem with windows 7 so I use ubuntu to bring back my files , but when I tried to open the files I have this message:

    - by user286972
    Error mounting /dev/sda1 at /media/ubuntu/B800C0C300C08A38: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=999,gid=999,dmask=0077,fmask=0177" "/dev/sda1" "/media/ubuntu/B800C0C300C08A38"' exited with non-zero exit status 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to read NTFS $Bitmap: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details.

    Read the article

  • cryptsetup partitions not detected at boot

    - by Luis
    I installed a fresh 12.04 and tried to mimic what I had for 10.04. swap should be encrypted with a urandom key and there's another partition that will contain home and other directories. # cat /etc/crypttab | grep -v '^#' | grep -v '^$' cryptswap /dev/sda5 /dev/urandom swap encriptado /dev/sda6 # grep -e 'cryptswap' -e 'encriptado' /etc/fstab /dev/mapper/cryptswap swap swap defaults 0 0 /dev/mapper/encriptado /encriptado ext4 defaults 0 0 I also apt-get install cryptsetup When I boot, the system says (try to translate) that either the partition is not found or is not ready. I should wait, press M for manual or S to jump over. What am I missing here?

    Read the article

  • Zend models and database relathionships

    - by user608341
    Hi people, i'm starting with Zend Framework and I'm a little bit confused with models and relathionships (one-to-many, many-to-many etc). The "Zend Framework Quick Start" says to create a Zend_Db_Table, a Data Mapper and finally our model class Suppose we have a database like this: table A ( id integer primary key, name varchar(50) ); table B ( id integer primary key, a_id integer references A ); then, i'll create: Application_Model_DbTable_A extends Zend_Db_Table_Abstract, Application_Model_AMapper, Application_Model_A, Application_Model_DbTable_B extends Zend_Db_Table_Abstract, Application_Model_BMapper, Application_Model_B, if I understood, i've to store the references informations in Application_Model_DbTable_A: protected $_dependentTables = array('B'); and Application_Model_DbTable_B: protected $_referenceMap = array( 'A' => array( 'columns' => array('a_id'), 'refTableClass' => 'A', 'refColums' => array('id') ) ); and my models class: class Application_Model_A { protected $_id; protected $_name; public function __construct(array $options = null) { if(is_array($options)) { $this->setOptions($options); } } public function __set($name, $value) { $method = 'set' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } $this->$method($value); } public function __get($name) { $method = 'get' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } return $this->$method(); } public function setOptions(array $options) { $methods = get_class_methods($this); foreach ($options as $key => $value) { $method = 'set' . ucfirst($key); if (in_array($method, $methods)) { $this->$method($value); } } return $this; } public function setName($name) { $this->_name = (string) $name; return $this; } public function getName() { return $this->_name; } public function setId($id) { $this->_id = (int) $id; return $this; } public function getId() { return $this->_id; } class Application_Model_B { protected $_id; protected $_a_id; public function __construct(array $options = null) { if(is_array($options)) { $this->setOptions($options); } } public function __set($name, $value) { $method = 'set' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } $this->$method($value); } public function __get($name) { $method = 'get' . $name; if (('mapper' == $name) || !method_exists($this, $method)) { throw new Exception('Invalid property'); } return $this->$method(); } public function setOptions(array $options) { $methods = get_class_methods($this); foreach ($options as $key => $value) { $method = 'set' . ucfirst($key); if (in_array($method, $methods)) { $this->$method($value); } } return $this; } public function setA_id($a_id) { $this->_a_id = (int) $a_id; return $this; } public function getA_id() { return $this->_a_id; } public function setId($id) { $this->_id = (int) $id; return $this; } public function getId() { return $this->_id; } it's that right?

    Read the article

  • Hooking DirectX EndScene from an injected DLL

    - by Etan
    I want to detour EndScene from an arbitrary DirectX 9 application to create a small overlay. As an example, you could take the frame counter overlay of FRAPS, which is shown in games when activated. I know the following methods to do this: Creating a new d3d9.dll, which is then copied to the games path. Since the current folder is searched first, before going to system32 etc., my modified DLL gets loaded, executing my additional code. Downside: You have to put it there before you start the game. Same as the first method, but replacing the DLL in system32 directly. Downside: You cannot add game specific code. You cannot exclude applications where you don't want your DLL to be loaded. Getting the EndScene offset directly from the DLL using tools like IDA Pro 4.9 Free. Since the DLL gets loaded as is, you can just add this offset to the DLL starting address, when it is mapped to the game, to get the actual offset, and then hook it. Downside: The offset is not the same on every system. Hooking Direct3DCreate9 to get the D3D9, then hooking D3D9-CreateDevice to get the device pointer, and then hooking Device-EndScene through the virtual table. Downside: The DLL cannot be injected, when the process is already running. You have to start the process with the CREATE_SUSPENDED flag to hook the initial Direct3DCreate9. Creating a new Device in a new window, as soon as the DLL gets injected. Then, getting the EndScene offset from this device and hooking it, resulting in a hook for the device which is used by the game. Downside: as of some information I have read, creating a second device may interfere with the existing device, and it may bug with windowed vs. fullscreen mode etc. Same as the third method. However, you'll do a pattern scan to get EndScene. Downside: doesn't look that reliable. How can I hook EndScene from an injected DLL, which may be loaded when the game is already running, without having to deal with different d3d9.dll's on other systems, and with a method which is reliable? How does FRAPS for example perform it's DirectX hooks? The DLL should not apply to all games, just to specific processes where I inject it via CreateRemoteThread.

    Read the article

  • Bluetooth connect to a RS232 adapter in android

    - by ThePosey
    Hello All, I am trying to use the Bluetooth Chat sample API app that google provides to connect to a bluetooth RS232 adapter hooked up to another device. Here is the app for reference: http://developer.android.com/resources/samples/BluetoothChat/index.html And here is the spec sheet for the RS232 connector just for reference: http://serialio.com/download/Docs/BlueSnap-guide-4.77%5FCommands.pdf Well the problem is that when I go to connect to the device with: mmSocket.connect(); (BluetoothSocket::connect()) I always get an IOException error thrown by the connect method. When I do a toString on the exception I get "Service discovery failed". My question is mostly what are the cases that would cause an IOException to get thrown in the connect method? I know those are in the source somewhere but I don't know exactly how the java layer that you write apps in and the C/C++ layer that contains the actual stacks interface. I know that it uses the bluez bluetooth stack which is written in C/C++ but not sure how that ties into the java layer which is what I would think is throwing the exception. Any help on pointing me to where I can try to dissect this issue would be incredible. Also just to note I am able to pair with the RS232 adapter just fine but I am never able to actually connect. Here is the logcat output for more reference: I/ActivityManager( 1018): Displayed activity com.example.android.BluetoothChat/.DeviceListActivity: 326 ms (total 326 ms) E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) D/BluetoothChat( 1729): onActivityResult -1 D/BluetoothChatService( 1729): connect to: 00:06:66:03:0C:51 D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_CONNECTING E/BluetoothChat( 1729): + ON RESUME + I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_CONNECTING I/BluetoothChatService( 1729): BEGIN mConnectThread E/BluetoothService.cpp( 1018): stopDiscoveryNative: D-Bus error in StopDiscovery: org.bluez.Error.Failed (Invalid discovery session) E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 I/BluetoothChatService( 1729): CONNECTION FAIL TOSTRING: java.io.IOException: Service discovery failed D/BluetoothChatService( 1729): setState() STATE_CONNECTING - STATE_LISTEN D/BluetoothChatService( 1729): start D/BluetoothChatService( 1729): setState() STATE_LISTEN - STATE_LISTEN I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID I/NotificationService( 1018): enqueueToast pkg=com.example.android.BluetoothChat callback=android.app.ITransientNotification$Stub$Proxy@446327c8 duration=0 I/BluetoothChat( 1729): MESSAGE_STATE_CHANGE: STATE_LISTEN E/BluetoothEventLoop.cpp( 1018): event_filter: Received signal org.bluez.Device:PropertyChanged from /org/bluez/1498/hci0/dev_00_06_66_03_0C_51 V/BluetoothEventRedirector( 1080): Received android.bleutooth.device.action.UUID The device I'm trying to connect to is the 00:06:66:03:0C:51 which I can scan for and apparently pair with just fine.

    Read the article

  • Blackberry Development, adding dynamic number of buttons and setting Fieldchangelistener() for them

    - by Nikesh Yadav
    Hi, I am adding dynamic number of buttons in a Blackberry application and trying to get different events on each button click. I am not able to apply the setchangelistener() for these array of buttons as once the loop finishes after adding all the buttons, the events gets generated only for the last indexed button. If I make us of getIndex(), it runs fine only if I am not adding any other fields on my screen, but if I add other fields along with these array of buttons, the getIndex() function count them in the indexing as well. Can anyone please help me out in setting FieldChangeListener to array of ButtonField? Here is a sample code of the way I am using the array of ButtonField. I the code I have added two test LabelField at the top of the screen, if I remove them the code will run fine and I will get different result for each button click, but if I keep them active, the indexing gets effected and the Button wont work. package buttonclickloop; import net.rim.device.api.ui.DrawStyle; import net.rim.device.api.ui.Field; import net.rim.device.api.ui.FieldChangeListener; import net.rim.device.api.ui.component.ButtonField; import net.rim.device.api.ui.component.LabelField; import net.rim.device.api.ui.container.HorizontalFieldManager; import net.rim.device.api.ui.container.MainScreen; public class ButtoncClickLoop extends MainScreen { int i = 0; private ButtonField[] btn = new ButtonField[50]; public ButtoncClickLoop() { // TODO Auto-generated constructor stub LabelField Field1 = new LabelField("Field1"); LabelField Field2 = new LabelField("Field2",DrawStyle.RIGHT | ButtonField.USE_ALL_WIDTH); HorizontalFieldManager FieldHmgr = new HorizontalFieldManager(); FieldHmgr.add(Field1); FieldHmgr.add(Field2); FieldHmgr.setMargin(0,0,10,5); add(FieldHmgr); while (i < 3){ FieldChangeListener listener = new FieldChangeListener() { public void fieldChanged(Field field, int context) { context = field.getIndex(); if (field == btn[context]){ add(new LabelField("Label" + context + "")); } } }; btn[i] = new ButtonField("Button" + i + ""); btn[i].setChangeListener(listener); add(btn[i]); i = i + 1; } } } Thanks, Nikesh

    Read the article

  • Postgresql: Implicit lock acquisition from foreign-key constraint evaluation

    - by fennec
    So, I'm being confused about foreign key constraint handling in Postgresql. (version 8.4.4, for what it's worth). We've got a couple of tables, mildly anonymized below: device: (id, blah, blah, blah, blah, blah x 50)… primary key on id whooooole bunch of other junk device_foo: (id, device_id, left, right) Foreign key (device_id) references device(id) on delete cascade; primary key on id btree index on 'left' and 'right' So I set out with two database windows to run some queries. db1> begin; lock table device in exclusive mode; db2> begin; update device_foo set left = left + 1; The db2 connection blocks. It seems odd to me that an update of the 'left' column on device_stuff should be affected by activity on the device table. But it is. In fact, if I go back to db1: db1> select * from device_stuff for update; *** deadlock occurs *** The pgsql log has the following: blah blah blah deadlock blah. CONTEXT: SQL statement "SELECT 1 FROM ONLY "public"."device" x WHERE "id" OPERATOR(pg_catalog.=) $1 FOR SHARE OF X: update device_foo set left = left + 1; I suppose I've got two issues: the first is that I don't understand the precise mechanism by which this sort of locking occurs. I have got a couple of useful queries to query pg_locks to see what sort of locks a statement invokes, but I haven't been able to observe this particular sort of locking when I run the update device_foo command in isolation. (Perhaps I'm doing something wrong, though.) I also can't find any documentation on the lock acquisition behavior of foreign-key constraint checks. All I have is a log message. Am I to infer from this that any change to a row will acquire an update lock on all the tables which it's foreign-keyed against? The second issue is that I'd like to find some way to make it not happen like that. I'm ending up with occasional deadlocks in the actual application. I'd like to be able to run big update statements that impact all rows on device_foo without acquiring a big lock on the device table. (There's a lot of access going on in the device table, and it's kind of an expensive lock to get.)

    Read the article

  • DIY a simple .inf on an existing .sys?

    - by Stijn Sanders
    In continuation of attempting to get an old Digi ST-1032 working on a new server, we've downgraded a server to Windows 2000 in an attempt to use the NT4 drivers. And it works, the old software setup works, finds the device on the SCSI bus, and connects the 32 ports to COM3..COM34 or any other set using the port remapper tool. The minor issue that remains is that Plug-and-Play still detects this device over SCSI and tries to wizard you into selecting a driver for it. Which doesn't exists (Digi Intl support confirms this device is so old, a 2000 or XP driver was never made). The exact name displayed is "DigiIntl ST-1032 SCSI Net Device" (Oddly enough, two devices get detected with this name, on two neighbouring LUN's, could one be the built-in terminator?) Is there a way to concoct a simple .inf that would (re-)register the existing sts.sys that appears to get registered by the (old) installer of the driver software?

    Read the article

  • Hyper-V Virtual Ethernet Adapter not working probperly - Code 31 on Host

    - by Chris S
    I have a Windows 8.1 machine with Hyper-V installed. From a "clean" Hyper-V configuration I open Virtual Switch Manager, create an External switch with "Allow management operating system to share this network adapter", click OK. Everything seems to work properly but the host loses network connectivity. Opening Device Manager, the "Hyper-V Virtual Ethernet Adapter" is shown under the Network Adapter section with a yellow triangle, and the following message: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31) An object ID was not found in the file. I tried "Uninstalling" the device, seems to work, but the device doesn't actually remove. I tried removing and re-adding the Hyper-V feature completely, no difference. Tried scf /scannow, no problems. System and Application logs show no errors. The Hyper-V-VMMS Networking log shows the following: Log Name: Microsoft-Windows-Hyper-V-VMMS-Networking Source: Microsoft-Windows-Hyper-V-VMMS Date: 10/24/2013 10:53:07 AM Event ID: 26088 Description: Failed to apply static IP settings to internal Ethernet adapter {A813DE9A-BE70-4FAE-AD31-BE4D54505A4B} ('885435B8-BE65-4EE9-826D-AB56035237ED'): Unspecified error (0x80004005). If I try to remove the Virtual Switch in Hyper-V Virtual Switch Manager I get this in that same log: Log Name: Microsoft-Windows-Hyper-V-VMMS-Networking Source: Microsoft-Windows-Hyper-V-VMMS Date: 10/24/2013 11:19:47 AM Event ID: 26142 Description: Failed while removing virtual Ethernet switch. Trying to remove the Virtual Switch leads to an error: Error applying Virtual Switch Properties changes Failed while removing virtual Ethernet switch. VM Networking does work.

    Read the article

  • Unable to Use Bluetooth Mighty Mouse or Wireless Keyboard with Boot Camp

    - by Kristopher Johnson
    I have Windows 7 64-bit running on a MacBook Pro in a Boot Camp partition. I am trying to pair with my Bluetooth Mighty Mouse and wireless keyboard under Windows, but whenever I try to do so, here's what happens: While on the Add a device window, I turn on the mouse or press a key on the keyboard, and the mouse or keyboard shows up in the list of available devices. I click the device and then the Next button, and the window displays Connecting to device... Time passes. Eventually, I get this error message indicating that the device could not be accessed. The error code is 0x80070015. I've run Windows Update and Apple Software Update.

    Read the article

  • change USB vendor id / product id

    - by Hugh Allen
    Under Windows, is there any easy way to change or forge the vendor and product id of a USB device? Say for example there's a useful program which expects a particular (but ubiquitous and generic) device but you think it will probably work with the device that you actually have. I've done lots of Googling and apparently you can do it under Linux so it occurs to me to run Windows in a VM under Linux, but that would be a bit inconvenient.

    Read the article

  • USB To Serial under OpenSuse 11.3

    - by Lars
    I have a LogiLink USB-To-Serial adapter. This has the PL2303 chip inside. When I insert the device: [26064.927083] usb 7-1: new full speed USB device using uhci_hcd and address 9 [26065.076090] usb 7-1: New USB device found, idVendor=067b, idProduct=2303 [26065.076099] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [26065.076105] usb 7-1: Product: USB-Serial Controller [26065.076110] usb 7-1: Manufacturer: Prolific Technology Inc. [26065.079181] pl2303 7-1:1.0: pl2303 converter detected [26065.091296] usb 7-1: pl2303 converter now attached to ttyUSB0 So the device is recognized and the converter is attached to ttyUSB0. When I do screen /dev/ttyUSB0 9600 I get the error: bash: /dev/ttyUSB0: Permission denied So I went looking in the file permissions. ls -l from the /dev folder reports: crw-rw---- 1 root dialout 188, 0 2011-04-26 15:47 ttyUSB0 I added my user lars to the dialout group. When I use the commands groups under lars it shows that I'm in the group. Though I still recieve the permissions denied error, as lars, and as root. I'm trying to connect to a console cable to configure some Cisco switches. My OS is OpenSuse 11.3 x86_64 with kernel version 2.6.34.7-0.7-desktop.

    Read the article

  • Dolby Digital Live (DDL) on Asus Rampage II Gene (Creative X-Fi Extreme)

    - by kevyn
    Hi there, I have an Asus Rampage II Gene motherboard which has X-Fi extreme built in. I can get it to work with Windows 7 ok using the Creative drivers, however when I try and install the DDL/DTS add on pack from Creative I get the error message: "There are no supported audio device available. You need to close the application. Click OK to close the application now" I don't understand it because I have the Creative software installed ok and supporting the sound without any problems. In Device manager the audio device comes up as 'High definition audio device' and uses driver: 6.1.7600.16385 from Microsoft. I tried using the Creative drivers which show up as 'soundmax HD audio' however these do not allow any of the Creative products to run properly. Please can anyone offer any help? Or even just confirm that DDL can work with my onboard sound? Windows 7 Ultimate 64 bit 6GB DDR3 XFX GS8800 384mb Asus Rampage II Gene Intel i7 920 (2.66)

    Read the article

  • Windows NT from vmware to kvm

    - by Luca Rossi
    I'm trying to convert a couple of old Windows NT virtual servers from vmware to KVM. I tried almost all guidelines and how to I found around the web but with no luck. I have the vmware virtual disk: Dlc1.vmdk partitioned image. I converted the vmdk into qcow2 image with the qemu utility and I tried to use it with kvm: kvm -hda test.qemu -vnc :1 -m 750 but I receive "error loading operating system" I also tried with raw partitions I can mount through losetup and kpartx. but nothing changed I also tried to create an brand new image file with: qemu-img create -f qcow2 test.qcow2 2G I partitioned the new image file and I copied the original partition 1 to the new partition 1 with dd: dd if=/dev/mapper/loop1p1 of=/dev/mapper/loop0p1 bs=128M no luck again I also tried with a single unpartitioned file: qemu-img create -f qcow2 test.qcow2 2G and I copied the partition 1 to the new image file: dd if=/dev/mapper/loop0p1 of=test.img bs=128M but when booting, I receive a black screen and the virtual machine hangs. The bootloader is loaded successfully, because I also tried with a GRUB live iso and I receive the same screens and errors. Note that grub sees the Windows setup and give me the boot choice. I have the suspect the problem is that the vmware machine is probably a scsi guest and in centos 6 (my system) scsi emulation is no longer supported. But in that case, where to change in Windows? I'm not so skilled with MS systems. Thank you for the help Luca Rossi

    Read the article

  • Sudoers file permissions

    - by twigg
    I'm trying to run the following command without the need for sudo: echo 1 | sudo tee -a /sys/block/$hd/device/delete The $hd variable changes dynamically from sdb - sdi for each one of my HDD's in my drive bay. I added the following line to the sudoers file: operator ALL=/sys/block/sdb/device/delete But this didn't make a difference its still asking for sudo password even if I run: echo 1 | sudo tee -a /sys/block/sdb/device/delete

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >