Search Results

Search found 27016 results on 1081 pages for 'entry point'.

Page 85/1081 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• C++ compilation error when passing a function into remove_if

  - by garsh0p

  So here's a snippet of my code. void RoutingProtocolImpl::removeAllInfinity() { dv.erase(std::remove_if(dv.begin(), dv.end(), hasInfCost), dv.end()); } bool RoutingProtocolImpl::hasInfCost(RoutingProtocolImpl::dv_entry *entry) { if (entry-link_cost == INFINITY_COST) { free(entry); return true; } else { return false; } } I'm getting the following error when compiling: RoutingProtocolImpl.cc:368: error: argument of type bool (RoutingProtocolImpl::)(RoutingProtocolImpl::dv_entry*)' does not matchbool (RoutingProtocolImpl::*)(RoutingProtocolImpl::dv_entry*)' Sorry, I'm kind of a C++ newb.

  Read the article

• Implement a threading to prevent UI block on a bug in an async function

  - by Marcx

  I think I ran up againt a bug in an async function... Precisely the getDirectoryListingAsync() of the File class... This method is supposted to return an object containing the lists of files in a specified folder. I found that calling this method on a direcory with a lot of files (in my tests more than 20k files), after few seconds there is a block on the UI until the process is completed... I think that this method is separated in two main block: 1) get the list of files 2) create the array with the details of the files The point 1 seems to be async (for a few second the ui is responsive), then when the process pass from point 1 to point 2 the block of the UI occurs until the complete event is dispathed... Here's some (simple) code: private function checkFiles(dir:File):void { if (dir.exists) { dir.addEventListener( FileListEvent.DIRECTORY_LISTING, listaImmaginiLocale); dir.getDirectoryListingAsync(); // after this point, for the firsts seconds the UI respond well (point 1), // few seconds later (point 2) the UI is frozen } } private function listaImmaginiLocale( event:FileListEvent ):void { // from this point on the UI is responsive again... } Actually in my projects there are some function that perform an heavy cpu usage and to prevent the UI block I implemented a simple function that after some iteration will wait giving time to UI to be refreshed. private var maxIteration:int = 150000; private function sampleFunct(offset:int = 0) :void { if (offset < maxIteration) { // do something // call the recursive function using a timeout.. // if the offset in multiple by 1000 the function will wait 15 millisec, // otherwise it will be called immediately // 1000 is a random number for the pourpose of this example, but I usually change the // value based on how much heavy is the function itself... setTimeout(function():void{aaa(++offset);}, (offset%1000?15:0)); } } Using this method I got a good responsive UI without afflicting performance... I'd like to implement it into the getDirectoryListingAsync method but I don't know if it's possibile how can I do it where is the file to edit or extend.. Any suggestion???

  Read the article

• How to create a status bar icon on the right side? (Android)

  - by yuku

  Notification and NotificationManager are used to create icons to be placed on the top-left position of the screen. A Notification also need to have an entry on the status bar pull-down. However, icons on the right side such as the battery, signal strength, wireless indicators do not need any entry on the status bar. How do I make such icons without any entry in the status bar pull-down?

  Read the article

• WCF: get generic type object (e.g. MyObject<T>) from remote machine

  - by Aaron

  I have two applications that are communicating through WCF. On the server the following object exists: public class MyObject<T> { ... public Entry<T> GetValue() } Where Entry<T> is another object with T Data as a public property. T could be any number of types (string, double, etc) On the client I have ClientObject<T> that needs to get the value of Data from the server (same type). Since I'm using WCF, I have to define my ServiceContract as an interface, and I can't have ClientObject<T> call Entry<T> GetMyObjectValue (string Name) which calls GetValue on the correct MyObject<T> because my interface isn't aware of the type information. I've tried implementing separate GetValue functions (GetMyObjectValueDouble, GetMyObjectValueString) in the interface and then have ClientObject determine the correct one to call. However, Entry<T> val = (Entry<T>)GetMyObjectValueDouble(...); doesn't work because it's not sure about the type information. How can I go about getting a generic object over WCF with the correct type information? Let me know if there are other details I can provide. Thanks!

  Read the article

• Convert enumeration to string

  - by emptyheaded

  I am trying to build a function that converts an item from an enum to its corresponding string. The enums I use are fairly long, so I didn't want to use a switch-case. I found a method using boost::unordered_map very convenient, but I don't know how to make a default return (when there is no item matching the enum). const boost::unordered_map<enum_type, const std::string> enumToString = boost::assign::map_list_of (data_1, "data_1") (data_2, "data_2"); I tried to create an additional function: std::string convert(enum_type entry) { if (enumToString.find(entry)) // not sure what test to place here, return enumToString.at(entry); //because the find method returns an iter else return "invalid_value"; } I even tried something exceedingly wrong: std::string convert(enum_type entry) { try{ return enumToString.at(entry); } catch(...){ return "invalid_value"; } } Result: evil "Debug" runtime error. Can somebody give me a suggestion on how to either 1) find an easier method to convert enum to a string with the same name as the enum item 2) find a way to use already built boost methods to get a default value from a hash map (best option) 3) find what to place in the test to use a function that returns either the pair of the key-value, or a different string if the key is not found in the map. Thank you very much.

  Read the article

• mysql get last auto increment value

  - by Mick

  Hi I have a field in mySql table called jobnumber which auto increments with each new entry. What I want to do is when a user views my form, get the value of the next 'jobnumber' . But I want to do this before any entry is made to the table. IE so when a user looks at a form it will display something like 'this is job number 6954' I have tried $rr = mysql_insert_id() but this only work after I have made an entry Can anyone help please thanks

  Read the article

• Scala loop returns as Unit and compiler points to "for" syntax?

  - by DeLongey

  Seems like Unit is the theme of my troubles today. I'm porting a JSON deserializer that uses Gson and when it comes to this for loop: def deserialize(json:JsonElement, typeOfT:Type, context:JsonDeserializationContext) = { var eventData = new EventData(null, null) var jsonObject = json.getAsJsonObject for(entry <- jsonObject.entrySet()) { var key = entry.getKey() var element = entry.getValue() element if("previous_attributes".equals(key)) { var previousAttributes = new scala.collection.mutable.HashMap[String, Object]() populateMapFromJSONObject(previousAttributes, element.getAsJsonObject()) eventData.setPreviousAttributes(previousAttributes) eventData } else if ("object".equals(key)) { val `type` = element.getAsJsonObject().get("object").getAsString() var cl = objectMap.get(`type`).asInstanceOf[StripeObject] var `object` = abstractObject.retrieve(cl, key) eventData.setObject(`object`) eventData } } } The compiler spits out the error type mismatch; found : Unit required: com.stripe.EventData and it points to this line here: for(entry <- jsonObject.entrySet()) Questions Confirm that it is indeed the Gson method entrySet() appearing as unit? If not, what part of the code is creating the issue? I've set return types/values for eventData class methods Is there a workaround for the Gson Unit issue? Thanks!

  Read the article

• Django ForeignKey _set on an inherited model

  - by neolaser

  I have two models Category and Entry. There is another model ExtEntry that inherits from Entry class Category(models.Model): title = models.CharField('title', max_length=255) description = models.TextField('description', blank=True) ... class Entry(models.Model): title = models.CharField('title', max_length=255) categories = models.ManyToManyField(Category) ... class ExtEntry(Entry): groups= models.CharField('title', max_length=255) value= models.CharField('title', max_length=255) ... I am able to use the Category.entry_set but I want to be able to do Category.blogentry_set but it is not available. If this is not available,then I need another method to get all ExtEntryrelated to one particular Category Thanks

  Read the article

• JAX-B annotations for elements that inherit from a parent

  - by AlexM

  When adding JAX-B Java annotations for Java classes - if I have a parent Class Entry, with two children, Book and JournalArticle, Would I add these annotations for all three classes: @XmlAccessorType(XmlAccessType.FIELD) @XmlRootElement ie: @XmlSeeAlso({au.com.library.Book.class, au.com.library.JournalArticle.class}) @XmlAccessorType(XmlAccessType.FIELD) @XmlRootElement public abstract class Entry implements Serializable{ private static final long serialVersionUID = -1895155325179947581L; @XmlElement(name="title") protected String title; @XmlElement(name="author") protected String author; @XmlElement(name="year") protected int year; and @XmlAccessorType(XmlAccessType.FIELD) @XmlRootElement public class Book extends Entry { @XmlElement(name="edition") private String edition; @XmlElement(name="publisher") private String publisher; @XmlElement(name="placeOfPublication") private String placeOfPub; and @XmlAccessorType(XmlAccessType.FIELD) @XmlRootElement public class JournalArticle extends Entry { @XmlElement(name="journalTitle") private String journalTitle; @XmlElement(name="volume") private String volume; @XmlElement(name="issue") private String issue; @XmlElement(name="pageNumbers") private String pgNumbers;

  Read the article

• Use jQuery to match variable text?

  - by VUELA

  Hello! I have a sidebar navigation that lists blog entry titles down the side of the page. I am trying to write some jquery that will check the text in the title of the current full blog entry page and match it with the corresponding title in the sidebar navigation so that I can apply a class to style for an active state link ... but I'm not quite getting it! Here is the link to an example page: http://ncw-commercial.com/property-listings/eastpoint-plaza-lot.html, and below is my current code. I have also tried using :contains but could not figure out how to get that to work with a variable rather than direct text. $('.single-journal-entry-wrapper .journal-entry .title').each(function(){ var activeTitle = $(this).text(); $(".feedburnerFeedBlock .headline a").filter(function(index) { return $(this).text() == "activeTitle"; }).parent().addClass("activeTitle"); });

  Read the article

• GetLocalValueEnumerator() Not Returning All Properties

  - by a_hardin

  I am trying to perform validation in my WPF application using the solution in Detecting WPF Validation Errors. public static bool IsValid(DependencyObject parent) { // Validate all the bindings on the parent bool valid = true; LocalValueEnumerator localValues = parent.GetLocalValueEnumerator(); while (localValues.MoveNext()) { LocalValueEntry entry = localValues.Current; if (BindingOperations.IsDataBound(parent, entry.Property)) { Binding binding = BindingOperations.GetBinding(parent, entry.Property); foreach (ValidationRule rule in binding.ValidationRules) { ValidationResult result = rule.Validate(parent.GetValue(entry.Property), null); if (!result.IsValid) { BindingExpression expression = BindingOperations.GetBindingExpression(parent, entry.Property); System.Windows.Controls.Validation.MarkInvalid(expression, new ValidationError(rule, expression, result.ErrorContent, null)); valid = false; } } } } // Validate all the bindings on the children for (int i = 0; i != VisualTreeHelper.GetChildrenCount(parent); ++i) { DependencyObject child = VisualTreeHelper.GetChild(parent, i); if (!IsValid(child)) { valid = false; } } return valid; } The problem I am running into is that when I step through the code for a TextBox, I'm not getting the Text property. The only properties I get are "PageHeight", "Instance", and "UndoManagerInstance". Therefore, I can not Validate the rules for the binding on the TextBox. Does anyone have any idea why I wouldn't be getting the correct properties? Is there another way to force validaton on controls in WPF? I haven't been able to find anyone else who has had this problem. Update: The TextBoxes I am trying to validate are within a DataTemplate. I found that if I copy one of the TextBoxes and place it directly in the Window, I am able to get the data. Using Woodstock, I saw that the data source for the TextBoxes in the template is "ParentTemplate", but it's "Local" for the TextBox outside of the template. So, the question now is, how can I get the DependencyProperties for controls inside a DataTemplate?

  Read the article

• Remove() not working on new elements [duplicate]

  - by user3317470

  This question already has an answer here: In jQuery, how to attach events to dynamic html elements? 9 answers I'm making a simple to do list. It's mostly working and finished. When you click on list elements the object gets removed and you can create new list elements through the text input at the bottom. The only problem is the new list elements can't be removed when you click them for some reason. Here's the code: http://jsfiddle.net/dnhynh/7psqndwL/20/ $(document).ready(function(){ $("li").click(function(){ $(this).remove(); }); $("button").click(function(){ var entry = $("#entry").val(); $("<li></li>", { text: entry }).appendTo("#list ul"); $("#entry").val(""); }); });

  Read the article

• Back to Basics: When does a .NET Assembly Dependency get loaded

  - by Rick Strahl

  When we work on typical day to day applications, it's easy to forget some of the core features of the .NET framework. For me personally it's been a long time since I've learned about some of the underlying CLR system level services even though I rely on them on a daily basis. I often think only about high level application constructs and/or high level framework functionality, but the low level stuff is often just taken for granted. Over the last week at DevConnections I had all sorts of low level discussions with other developers about the inner workings of this or that technology (especially in light of my Low Level ASP.NET Architecture talk and the Razor Hosting talk). One topic that came up a couple of times and ended up a point of confusion even amongst some seasoned developers (including some folks from Microsoft <snicker>) is when assemblies actually load into a .NET process. There are a number of different ways that assemblies are loaded in .NET. When you create a typical project assemblies usually come from: The Assembly reference list of the top level 'executable' project The Assembly references of referenced projects Dynamically loaded at runtime via AppDomain/Reflection loading In addition .NET automatically loads mscorlib (most of the System namespace) the boot process that hosts the .NET runtime in EXE apps, or some other kind of runtime hosting environment (runtime hosting in servers like IIS, SQL Server or COM Interop). In hosting environments the runtime host may also pre-load a bunch of assemblies on its own (for example the ASP.NET host requires all sorts of assemblies just to run itself, before ever routing into your user specific code). Assembly Loading The most obvious source of loaded assemblies is the top level application's assembly reference list. You can add assembly references to a top level application and those assembly references are then available to the application. In a nutshell, referenced assemblies are not immediately loaded - they are loaded on the fly as needed. So regardless of whether you have an assembly reference in a top level project, or a dependent assembly assemblies typically load on an as needed basis, unless explicitly loaded by user code. The same is true of dependent assemblies. To check this out I ran a simple test: I have a utility assembly Westwind.Utilities which is a general purpose library that can work in any type of project. Due to a couple of small requirements for encoding and a logging piece that allows logging Web content (dependency on HttpContext.Current) this utility library has a dependency on System.Web. Now System.Web is a pretty large assembly and generally you'd want to avoid adding it to a non-Web project if it can be helped. So I created a Console Application that loads my utility library: You can see that the top level Console app a reference to Westwind.Utilities and System.Data (beyond the core .NET libs). The Westwind.Utilities project on the other hand has quite a few dependencies including System.Web. I then add a main program that accesses only a simple utillity method in the Westwind.Utilities library that doesn't require any of the classes that access System.Web: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); } StringUtils.NewStringId() calls into Westwind.Utilities, but it doesn't rely on System.Web. Any guesses what the assembly list looks like when I stop the code on the ReadLine() command? I'll wait here while you think about it… … … So, when I stop on ReadLine() and then fire up Process Explorer and check the assembly list I get: We can see here that .NET has not actually loaded any of the dependencies of the Westwind.Utilities assembly. Also not loaded is the top level System.Data reference even though it's in the dependent assembly list of the top level project. Since this particular function I called only uses core System functionality (contained in mscorlib) there's in fact nothing else loaded beyond the main application and my Westwind.Utilities assembly that contains the method accessed. None of the dependencies of Westwind.Utilities loaded. If you were to open the assembly in a disassembler like Reflector or ILSpy, you would however see all the compiled in dependencies. The referenced assemblies are in the dependency list and they are loadable, but they are not immediately loaded by the application. In other words the C# compiler and .NET linker are smart enough to figure out the dependencies based on the code that actually is referenced from your application and any dependencies cascading down into the dependencies from your top level application into the referenced assemblies. In the example above the usage requirement is pretty obvious since I'm only calling a single static method and then exiting the app, but in more complex applications these dependency relationships become very complicated - however it's all taken care of by the compiler and linker figuring out what types and members are actually referenced and including only those assemblies that are in fact referenced in your code or required by any of your dependencies. The good news here is: That if you are referencing an assembly that has a dependency on something like System.Web in a few places that are not actually accessed by any of your code or any dependent assembly code that you are calling, that assembly is never loaded into memory! Some Hosting Environments pre-load Assemblies The load behavior can vary however. In Console and desktop applications we have full control over assembly loading so we see the core CLR behavior. However other environments like ASP.NET for example will preload referenced assemblies explicitly as part of the startup process - primarily to minimize load conflicts. Specifically ASP.NET pre-loads all assemblies referenced in the assembly list and the /bin folder. So in Web applications it definitely pays to minimize your top level assemblies if they are not used. Understanding when Assemblies Load To clarify and see it actually happen what I described in the first example , let's look at a couple of other scenarios. To see assemblies loading at runtime in real time lets create a utility function to print out loaded assemblies to the console: public static void PrintAssemblies() { var assemblies = AppDomain.CurrentDomain.GetAssemblies(); foreach (var assembly in assemblies) { Console.WriteLine(assembly.GetName()); } } Now let's look at the first scenario where I have class method that references internally uses System.Web. In the first scenario lets add a method to my main program like this: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.ReadLine(); PrintAssemblies(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } UpdateFromWebRequest() internally accesses HttpContext.Current to read some information of the ASP.NET Request object so it clearly needs a reference System.Web to work. In this first example, the method that holds the calling code is never called, but exists as a static method that can potentially be called externally at some point. What do you think will happen here with the assembly loading? Will System.Web load in this example? No - it doesn't. Because the WebLogEntry() method is never called by the mainline application (or anywhere else) System.Web is not loaded. .NET dynamically loads assemblies as code that needs it is called. No code references the WebLogEntry() method and so System.Web is never loaded. Next, let's add the call to this method, which should trigger System.Web to be loaded because a dependency exists. Let's change the code to: static void Main(string[] args) { Console.WriteLine(StringUtils.NewStringId()); Console.WriteLine("--- Before:"); PrintAssemblies(); WebLogEntry(); Console.WriteLine("--- After:"); PrintAssemblies(); Console.ReadLine(); } public static void WebLogEntry() { var entry = new WebLogEntry(); entry.UpdateFromRequest(); Console.WriteLine(entry.QueryString); } Looking at the code now, when do you think System.Web will be loaded? Will the before list include it? Yup System.Web gets loaded, but only after it's actually referenced. In fact, just until before the call to UpdateFromRequest() System.Web is not loaded - it only loads when the method is actually called and requires the reference in the executing code. Moral of the Story So what have we learned - or maybe remembered again? Dependent Assembly References are not pre-loaded when an application starts (by default) Dependent Assemblies that are not referenced by executing code are never loaded Dependent Assemblies are just in time loaded when first referenced in code All of this is nothing new - .NET has always worked like this. But it's good to have a refresher now and then and go through the exercise of seeing it work in action. It's not one of those things we think about everyday, and as I found out last week, I couldn't remember exactly how it worked since it's been so long since I've learned about this. And apparently I'm not the only one as several other people I had discussions with in relation to loaded assemblies also didn't recall exactly what should happen or assumed incorrectly that just having a reference automatically loads the assembly. The moral of the story for me is: Trying at all costs to eliminate an assembly reference from a component is not quite as important as it's often made out to be. For example, the Westwind.Utilities module described above has a logging component, including a Web specific logging entry that supports pulling information from the active HTTP Context. Adding that feature requires a reference to System.Web. Should I worry about this in the scope of this library? Probably not, because if I don't use that one class of nearly a hundred, System.Web never gets pulled into the parent process. IOW, System.Web only loads when I use that specific feature and if I am, well I clearly have to be running in a Web environment anyway to use it realistically. The alternative would be considerably uglier: Pulling out the WebLogEntry class and sticking it into another assembly and breaking up the logging code. In this case - definitely not worth it. So, .NET definitely goes through some pretty nifty optimizations to ensure that it loads only what it needs and in most cases you can just rely on .NET to do the right thing. Sometimes though assembly loading can go wrong (especially when signed and versioned local assemblies are involved), but that's subject for a whole other post…© Rick Strahl, West Wind Technologies, 2005-2012Posted in .NET  CSharp   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• How to tell if SPARC T4 crypto is being used?

  - by danx

  A question that often comes up when running applications on SPARC T4 systems is "How can I tell if hardware crypto accleration is being used?" To review, the SPARC T4 processor includes a crypto unit that supports several crypto instructions. For hardware crypto these include 11 AES instructions, 4 xmul* instructions (for AES GCM carryless multiply), mont for Montgomery multiply (optimizes RSA and DSA), and 5 des_* instructions (for DES3). For hardware hash algorithm optimization, the T4 has the md5, sha1, sha256, and sha512 instructions (the last two are used for SHA-224 an SHA-384). First off, it's easy to tell if the processor T4 crypto instructions—use the isainfo -v command and look for "sparcv9" and "aes" (and other hash and crypto algorithms) in the output: $ isainfo -v 64-bit sparcv9 applications crc32c cbcond pause mont mpmul sha512 sha256 sha1 md5 camellia kasumi des aes ima hpc vis3 fmaf asi_blk_init vis2 vis popc These instructions are not-privileged, so are available for direct use in user-level applications and libraries (such as OpenSSL). Here is the "openssl speed -evp" command shown with the built-in t4 engine and with the pkcs11 engine. Both run the T4 AES instructions, but the t4 engine is faster than the pkcs11 engine because it has less overhead (especially for smaller packet sizes): t-4 $ /usr/bin/openssl version OpenSSL 1.0.0j 10 May 2012 t-4 $ /usr/bin/openssl engine (t4) SPARC T4 engine support (dynamic) Dynamic engine loading support (pkcs11) PKCS #11 engine support t-4 $ /usr/bin/openssl speed -evp aes-128-cbc # t4 engine used by default . . . The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 487777.10k 816822.21k 986012.59k 1017029.97k 1053543.08k t-4 $ /usr/bin/openssl speed -engine pkcs11 -evp aes-128-cbc engine "pkcs11" set. . . . The 'numbers' are in 1000s of bytes per second processed. type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes aes-128-cbc 31703.58k 116636.39k 350672.81k 696170.50k 993599.49k Note: The "-evp" flag indicates use the OpenSSL "EnVeloPe" API, which gives more accurate results. That's because it tells OpenSSL to use the same API that external programs use when calling OpenSSL libcrypto functions, evp(3openssl). DTrace Shows if T4 Crypto Functions Are Used OK, good enough, the isainfo(1) command shows the instructions are present, but how does one know if they are being used? Chi-Chang Lin, who works on Oracle Solaris performance, wrote a Dtrace script to show if T4 instructions are being executed. To show the T4 instructions are being used, run the following Dtrace script. Look for functions named "t4" and "yf" in the output. The OpenSSL T4 engine uses functions named "t4" and the PKCS#11 engine uses functions named "yf". To demonstrate, I'll first run "openssl speed" with the built-in t4 engine then with the pkcs11 engine. The performance numbers are not valid due to dtrace probes slowing things down. t-4 # dtrace -Z -n ' pid$target::*yf*:entry,pid$target::*t4_*:entry{ @[probemod, probefunc] = count();}' \ -c "/usr/bin/openssl speed -evp aes-128-cbc" dtrace: description 'pid$target::*yf*:entry' matched 101 probes . . . dtrace: pid 2029 has exited libcrypto.so.1.0.0 ENGINE_load_t4 1 libcrypto.so.1.0.0 t4_DH 1 libcrypto.so.1.0.0 t4_DSA 1 libcrypto.so.1.0.0 t4_RSA 1 libcrypto.so.1.0.0 t4_destroy 1 libcrypto.so.1.0.0 t4_free_aes_ctr_NIDs 1 libcrypto.so.1.0.0 t4_init 1 libcrypto.so.1.0.0 t4_add_NID 3 libcrypto.so.1.0.0 t4_aes_expand128 5 libcrypto.so.1.0.0 t4_cipher_init_aes 5 libcrypto.so.1.0.0 t4_get_all_ciphers 6 libcrypto.so.1.0.0 t4_get_all_digests 59 libcrypto.so.1.0.0 t4_digest_final_sha1 65 libcrypto.so.1.0.0 t4_digest_init_sha1 65 libcrypto.so.1.0.0 t4_sha1_multiblock 126 libcrypto.so.1.0.0 t4_digest_update_sha1 261 libcrypto.so.1.0.0 t4_aes128_cbc_encrypt 1432979 libcrypto.so.1.0.0 t4_aes128_load_keys_for_encrypt 1432979 libcrypto.so.1.0.0 t4_cipher_do_aes_128_cbc 1432979 t-4 # dtrace -Z -n 'pid$target::*yf*:entry{ @[probemod, probefunc] = count();}   pid$target::*yf*:entry,pid$target::*t4_*:entry{ @[probemod, probefunc] = count();}' \ -c "/usr/bin/openssl speed -engine pkcs11 -evp aes-128-cbc" dtrace: description 'pid$target::*yf*:entry' matched 101 probes engine "pkcs11" set. . . . dtrace: pid 2033 has exited libcrypto.so.1.0.0 ENGINE_load_t4 1 libcrypto.so.1.0.0 t4_DH 1 libcrypto.so.1.0.0 t4_DSA 1 libcrypto.so.1.0.0 t4_RSA 1 libcrypto.so.1.0.0 t4_destroy 1 libcrypto.so.1.0.0 t4_free_aes_ctr_NIDs 1 libcrypto.so.1.0.0 t4_get_all_ciphers 1 libcrypto.so.1.0.0 t4_get_all_digests 1 libsoftcrypto.so.1 rijndael_key_setup_enc_yf 1 libsoftcrypto.so.1 yf_aes_expand128 1 libcrypto.so.1.0.0 t4_add_NID 3 libsoftcrypto.so.1 yf_aes128_cbc_encrypt 1542330 libsoftcrypto.so.1 yf_aes128_load_keys_for_encrypt 1542330 So, as shown above the OpenSSL built-in t4 engine executes t4_* functions (which are hand-coded assembly executing the T4 AES instructions) and the OpenSSL pkcs11 engine executes *yf* functions. Programmatic Use of OpenSSL T4 engine The OpenSSL t4 engine is used automatically with the /usr/bin/openssl command line. Chi-Chang Lin also points out that if you're calling the OpenSSL API (libcrypto.so) from a program, you must call ENGINE_load_built_engines(), otherwise the built-in t4 engine will not be loaded. You do not call ENGINE_set_default(). That's because "openssl speed -evp" test calls ENGINE_load_built_engines() even though the "-engine" option wasn't specified. OpenSSL T4 engine Availability The OpenSSL t4 engine is available with Solaris 11 and 11.1. For Solaris 10 08/11 (U10), you need to use the OpenSSL pkcs311 engine. The OpenSSL t4 engine is distributed only with the version of OpenSSL distributed with Solaris (and not third-party or self-compiled versions of OpenSSL). The OpenSSL engine implements the AES cipher for Solaris 11, released 11/2011. For Solaris 11.1, released 11/2012, the OpenSSL engine adds optimization for the MD5, SHA-1, and SHA-2 hash algorithms, and DES-3. Although the T4 processor has Camillia and Kasumi block cipher instructions, these are not implemented in the OpenSSL T4 engine. The following charts may help view availability of optimizations. The first chart shows what's available with Solaris CLIs and APIs, the second chart shows what's available in Solaris OpenSSL. Native Solaris Optimization for SPARC T4 This table is shows Solaris native CLI and API support. As such, they are all available with the OpenSSL pkcs11 engine. CLIs: "openssl -engine pkcs11", encrypt(1), decrypt(1), mac(1), digest(1), MD5sum(1), SHA1sum(1), SHA224sum(1), SHA256sum(1), SHA384sum(1), SHA512sum(1) APIs: PKCS#11 library libpkcs11(3LIB) (incluDES Openssl pkcs11 engine), libMD(3LIB), and Solaris kernel modules AlgorithmSolaris 1008/11 (U10)Solaris 11Solaris 11.1 AES-ECB, AES-CBC, AES-CTR, AES-CBC AES-CFB128 XXX DES3-ECB, DES3-CBC, DES2-ECB, DES2-CBC, DES-ECB, DES-CBC XXX bignum Montgomery multiply (RSA, DSA) XXX MD5, SHA-1, SHA-256, SHA-384, SHA-512 XXX SHA-224 X ARCFOUR (RC4) X Solaris OpenSSL T4 Engine Optimization This table is for the Solaris OpenSSL built-in t4 engine. Algorithms listed above are also available through the OpenSSL pkcs11 engine. CLI: openssl(1openssl) APIs: openssl(5), engine(3openssl), evp(3openssl), libcrypto crypto(3openssl) AlgorithmSolaris 11Solaris 11SRU2Solaris 11.1 AES-ECB, AES-CBC, AES-CTR, AES-CBC AES-CFB128 XXX DES3-ECB, DES3-CBC, DES-ECB, DES-CBC X bignum Montgomery multiply (RSA, DSA) X MD5, SHA-1, SHA-256, SHA-384, SHA-512 XX SHA-224 X Source Code Availability Solaris Most of the T4 assembly code that called the new T4 crypto instructions was written by Ferenc Rákóczi of the Solaris Security group, with assistance from others. You can download the Solaris source for this and other parts of Solaris as a few zip files at the Oracle Download website. The relevant source files are generally under directories usr/src/common/crypto/{aes,arcfour,des,md5,modes,sha1,sha2}}/sun4v/. and usr/src/common/bignum/sun4v/. Solaris 11 binary is available from the Oracle Solaris 11 download website. OpenSSL t4 engine The source for the OpenSSL t4 engine, which is based on the Solaris source above, is viewable through the OpenGrok source code browser in directory src/components/openssl/openssl-1.0.0/engines/t4 . You can download the source from the same website or through Mercurial source code management, hg(1). Conclusion Oracle Solaris with SPARC T4 provides a rich set of accelerated cryptographic and hash algorithms. Using the latest update, Solaris 11.1, provides the best set of optimized algorithms, but alternatives are often available, sometimes slightly slower, for releases back to Solaris 10 08/11 (U10). Reference See also these earlier blogs. SPARC T4 OpenSSL Engine by myself, Dan Anderson (2011), discusses the Openssl T4 engine and reviews the SPARC T4 processor for the Solaris 11 release. Exciting Crypto Advances with the T4 processor and Oracle Solaris 11 by Valerie Fenwick (2011) discusses crypto algorithms that were optimized for the T4 processor with the Solaris 11 FCS (11/11) and Solaris 10 08/11 (U10) release. T4 Crypto Cheat Sheet by Stefan Hinker (2012) discusses how to make T4 crypto optimization available to various consumers (such as SSH, Java, OpenSSL, Apache, etc.) High Performance Security For Oracle Database and Fusion Middleware Applications using SPARC T4 (PDF, 2012) discusses SPARC T4 and its usage to optimize application security. Configuring Oracle iPlanet WebServer / Oracle Traffic Director to use crypto accelerators on T4-1 servers by Meena Vyas (2012)

  Read the article

• Filtering List Data with a jQuery-searchFilter Plugin

  - by Rick Strahl

  When dealing with list based data on HTML forms, filtering that data down based on a search text expression is an extremely useful feature. We’re used to search boxes on just about anything these days and HTML forms should be no different. In this post I’ll describe how you can easily filter a list down to just the elements that match text typed into a search box. It’s a pretty simple task and it’s super easy to do, but I get a surprising number of comments from developers I work with who are surprised how easy it is to hook up this sort of behavior, that I thought it’s worth a blog post. But Angular does that out of the Box, right? These days it seems everybody is raving about Angular and the rich SPA features it provides. One of the cool features of Angular is the ability to do drop dead simple filters where you can specify a filter expression as part of a looping construct and automatically have that filter applied so that only items that match the filter show. I think Angular has single handedly elevated search filters to first rate, front-row status because it’s so easy. I love using Angular myself, but Angular is not a generic solution to problems like this. For one thing, using Angular requires you to render the list data with Angular – if you have data that is server rendered or static, then Angular doesn’t work. Not all applications are client side rendered SPAs – not by a long shot, and nor do all applications need to become SPAs. Long story short, it’s pretty easy to achieve text filtering effects using jQuery (or plain JavaScript for that matter) with just a little bit of work. Let’s take a look at an example. Why Filter? Client side filtering is a very useful tool that can make it drastically easier to sift through data displayed in client side lists. In my applications I like to display scrollable lists that contain a reasonably large amount of data, rather than the classic paging style displays which tend to be painful to use. So I often display 50 or so items per ‘page’ and it’s extremely useful to be able to filter this list down. Here’s an example in my Time Trakker application where I can quickly glance at various common views of my time entries. I can see Recent Entries, Unbilled Entries, Open Entries etc and filter those down by individual customers and so forth. Each of these lists results tends to be a few pages worth of scrollable content. The following screen shot shows a filtered view of Recent Entries that match the search keyword of CellPage: As you can see in this animated GIF, the filter is applied as you type, displaying only entries that match the text anywhere inside of the text of each of the list items. This is an immediately useful feature for just about any list display and adds significant value. A few lines of jQuery The good news is that this is trivially simple using jQuery. To get an idea what this looks like, here’s the relevant page layout showing only the search box and the list layout:<div id="divItemWrapper"> <div class="time-entry"> <div class="time-entry-right"> May 11, 2014 - 7:20pm<br /> <span style='color:steelblue'>0h:40min</span><br /> <a id="btnDeleteButton" href="#" class="hoverbutton" data-id="16825"> <img src="images/remove.gif" /> </a> </div> <div class="punchedoutimg"></div> <b><a href='/TimeTrakkerWeb/punchout/16825'>Project Housekeeping</a></b><br /> <small><i>Sawgrass</i></small> </div> ... more items here </div> So we have a searchbox txtSearchPage and a bunch of DIV elements with a .time-entry CSS class attached that makes up the list of items displayed. To hook up the search filter with jQuery is merely a matter of a few lines of jQuery code hooked to the .keyup() event handler: <script type="text/javascript"> $("#txtSearchPage").keyup(function() { var search = $(this).val(); $(".time-entry").show(); if (search) $(".time-entry").not(":contains(" + search + ")").hide(); }); </script> The idea here is pretty simple: You capture the keystroke in the search box and capture the search text. Using that search text you first make all items visible and then hide all the items that don’t match. Since DOM changes are applied after a method finishes execution in JavaScript, the show and hide operations are effectively batched up and so the view changes only to the final list rather than flashing the whole list and then removing items on a slow machine. You get the desired effect of the list showing the items in question. Case Insensitive Filtering But there is one problem with the solution above: The jQuery :contains filter is case sensitive, so your search text has to match expressions explicitly which is a bit cumbersome when typing. In the screen capture above I actually cheated – I used a custom filter that provides case insensitive contains behavior. jQuery makes it really easy to create custom query filters, and so I created one called containsNoCase. Here’s the implementation of this custom filter:$.expr[":"].containsNoCase = function(el, i, m) { var search = m[3]; if (!search) return false; return new RegExp(search, "i").test($(el).text()); }; This filter can be added anywhere where page level JavaScript runs – in page script or a seperately loaded .js file.  The filter basically extends jQuery with a : expression. Filters get passed a tokenized array that contains the expression. In this case the m[3] contains the search text from inside of the brackets. A filter basically looks at the active element that is passed in and then can return true or false to determine whether the item should be matched. Here I check a regular expression that looks for the search text in the element’s text. So the code for the filter now changes to:$(".time-entry").not(":containsNoCase(" + search + ")").hide(); And voila – you now have a case insensitive search.You can play around with another simpler example using this Plunkr:http://plnkr.co/edit/hDprZ3IlC6uzwFJtgHJh?p=preview Wrapping it up in a jQuery Plug-in To make this even easier to use and so that you can more easily remember how to use this search type filter, we can wrap this logic into a small jQuery plug-in:(function($, undefined) { $.expr[":"].containsNoCase = function(el, i, m) { var search = m[3]; if (!search) return false; return new RegExp(search, "i").test($(el).text()); }; $.fn.searchFilter = function(options) { var opt = $.extend({ // target selector targetSelector: "", // number of characters before search is applied charCount: 1 }, options); return this.each(function() { var $el = $(this); $el.keyup(function() { var search = $(this).val(); var $target = $(opt.targetSelector); $target.show(); if (search && search.length >= opt.charCount) $target.not(":containsNoCase(" + search + ")").hide(); }); }); }; })(jQuery); To use this plug-in now becomes a one liner:$("#txtSearchPagePlugin").searchFilter({ targetSelector: ".time-entry", charCount: 2}) You attach the .searchFilter() plug-in to the text box you are searching and specify a targetSelector that is to be filtered. Optionally you can specify a character count at which the filter kicks in since it’s kind of useless to filter at a single character typically. Summary This is s a very easy solution to a cool user interface feature your users will thank you for. Search filtering is a simple but highly effective user interface feature, and as you’ve seen in this post it’s very simple to create this behavior with just a few lines of jQuery code. While all the cool kids are doing Angular these days, jQuery is still useful in many applications that don’t embrace the ‘everything generated in JavaScript’ paradigm. I hope this jQuery plug-in or just the raw jQuery will be useful to some of you… Resources Example on Plunker© Rick Strahl, West Wind Technologies, 2005-2014Posted in jQuery  HTML5  JavaScript   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• IRQ problem with 2.6.32/2.6.39 kernel on Debian Squeeze x86_64

  - by MasterM

  I recently assembled a new computer so that all hardware is pretty new. Since then I've been experiencing some problem with IRQs when running Debian 6.0. On random occasions, usually after an hour or so of running I hear a beep and this shows up in dmesg: [ 3537.762795] irq 16: nobody cared (try booting with the "irqpoll" option) [ 3537.762797] Pid: 0, comm: swapper Tainted: P W O 2.6.39-2-amd64 #1 [ 3537.762798] Call Trace: [ 3537.762799] <IRQ> [<ffffffff810924d4>] ? __report_bad_irq+0x3a/0xa2 [ 3537.762803] [<ffffffff810926a4>] ? note_interrupt+0x168/0x1da [ 3537.762805] [<ffffffff81090dd4>] ? handle_irq_event_percpu+0x171/0x18f [ 3537.762807] [<ffffffff8100e0e2>] ? read_tsc+0x5/0x16 [ 3537.762809] [<ffffffff8106b8a2>] ? update_ts_time_stats+0x32/0x6b [ 3537.762810] [<ffffffff81090e26>] ? handle_irq_event+0x34/0x52 [ 3537.762812] [<ffffffff81063fb7>] ? sched_clock_idle_wakeup_event+0x12/0x1c [ 3537.762813] [<ffffffff81092df2>] ? handle_fasteoi_irq+0x82/0xa4 [ 3537.762815] [<ffffffff8100aadb>] ? handle_irq+0x1a/0x23 [ 3537.762816] [<ffffffff8100a384>] ? do_IRQ+0x45/0xaa [ 3537.762818] [<ffffffff81332c93>] ? common_interrupt+0x13/0x13 [ 3537.762818] <EOI> [<ffffffff81332c8e>] ? common_interrupt+0xe/0x13 [ 3537.762821] [<ffffffff81026800>] ? native_safe_halt+0x2/0x3 [ 3537.762829] [<ffffffffa016ed58>] ? acpi_idle_do_entry+0x39/0x62 [processor] [ 3537.762831] [<ffffffffa016edde>] ? acpi_idle_enter_c1+0x5d/0xad [processor] [ 3537.762834] [<ffffffff81261033>] ? cpuidle_idle_call+0x11f/0x1cc [ 3537.762835] [<ffffffff81008dd2>] ? cpu_idle+0xab/0xe1 [ 3537.762837] [<ffffffff8169fc60>] ? start_kernel+0x3e0/0x3eb [ 3537.762838] [<ffffffff8169f3c8>] ? x86_64_start_kernel+0x102/0x10f [ 3537.762839] handlers: [ 3537.762840] [<ffffffffa0358d5a>] (rtl8169_interrupt+0x0/0x2d7 [r8169]) [ 3537.762842] [<ffffffffa08ff2ca>] (nv_kern_isr+0x0/0x54 [nvidia]) [ 3537.762902] Disabling IRQ #16 After that Xorg either hogs on CPU or is unstable (up to hanging the system completely). When I restart Xorg everything is fine again and the problem doesn't occur until next reboot. I tried to upgrade the kernel from stock 2.6.32 to 2.6.39 from unstable repository but that didn't help. Booting with irqpoll option only seems to prolong the initial time period after which the problem occurs. I'm using latest NVIDIA drivers and Realtek firmware from firmware-realtek package. I have two GTX 560Ti that run in SLI. Disabling SLI or taking out one card completely doesn't solve the problem either. Output of uname -a is: Linux whitestar 2.6.39-2-amd64 #1 SMP Wed Jun 8 11:01:04 UTC 2011 x86_64 GNU/Linux Output of lspci is: 00:00.0 Host bridge: Intel Corporation Sandy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:01.1 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 05) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.2 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 82801 PCI Bridge (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Cougar Point LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 01:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 02:00.0 VGA compatible controller: nVidia Corporation Device 1200 (rev a1) 02:00.1 Audio device: nVidia Corporation Device 0e0c (rev a1) 04:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 06:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) 07:00.0 PCI bridge: Device 1b21:1080 (rev 01) 08:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8110SC/8169SC Gigabit Ethernet (rev 10) 08:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) Contents of /proc/interrupts: CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 0: 77 0 0 0 0 0 0 0 IO-APIC-edge timer 1: 2 0 0 0 0 0 0 0 IO-APIC-edge i8042 8: 1 0 0 0 0 0 0 0 IO-APIC-edge rtc0 9: 0 0 0 0 0 0 0 0 IO-APIC-fasteoi acpi 12: 4 0 0 0 0 0 0 0 IO-APIC-edge i8042 16: 699083 0 0 0 0 0 0 0 IO-APIC-fasteoi nvidia, eth0 17: 87810 0 0 0 0 0 0 0 IO-APIC-fasteoi firewire_ohci, hda_intel, nvidia 18: 242 0 0 0 0 0 0 0 IO-APIC-fasteoi hda_intel 23: 85925 0 0 0 0 0 0 0 IO-APIC-fasteoi ehci_hcd:usb5, ehci_hcd:usb6 40: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 41: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 42: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 43: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 44: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 45: 0 0 0 0 0 0 0 0 PCI-MSI-edge PCIe PME 46: 79853 0 0 0 0 0 0 0 PCI-MSI-edge ahci 48: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 49: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 50: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 51: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 52: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 53: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 54: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 55: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 56: 1 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 57: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 58: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 59: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 60: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 61: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 62: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 63: 0 0 0 0 0 0 0 0 PCI-MSI-edge xhci_hcd 64: 173506 0 0 0 0 0 0 0 PCI-MSI-edge hda_intel NMI: 482 89 25 13 277 24 11 10 Non-maskable interrupts LOC: 783857 194752 114133 70577 372438 179065 117179 162016 Local timer interrupts SPU: 0 0 0 0 0 0 0 0 Spurious interrupts PMI: 482 89 25 13 277 24 11 10 Performance monitoring interrupts IWI: 0 0 0 0 0 0 0 0 IRQ work interrupts RES: 131917 46750 7432 3291 150003 9576 3435 3067 Rescheduling interrupts CAL: 2759 6563 7150 6997 5387 7140 7269 6678 Function call interrupts TLB: 4396 2038 1336 492 5434 1896 1121 606 TLB shootdowns TRM: 0 0 0 0 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 0 0 0 0 Machine check exceptions MCP: 37 37 37 37 37 37 37 37 Machine check polls ERR: 0 MIS: 0 Last but not least, right after boot-up those lines are usually present in dmesg: [ 18.367094] hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj. [ 18.458859] hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj. I'm not sure if it's related or a symptom of a bigger problem so I'm posting it just in case. I don't really know what other information might be of relevance here. Don't hesitate to ask for more in the comments.

  Read the article

• Representing robot's elbow angle in 3-D

  - by Onkar Deshpande

  I am given coordinates of two points in 3-D viz. shoulder point and object point(to which I am supposed to reach). I am also given the length from my shoulder-to-elbow arm and the length of my forearm. I am trying to solve for the unknown position(the position of the joint elbow). I am using cosine rule to find out the elbow angle. Here is my code - #include <stdio.h> #include <math.h> #include <stdlib.h> struct point { double x, y, z; }; struct angles { double clock_wise; double counter_clock_wise; }; double max(double a, double b) { return (a > b) ? a : b; } /* * Check if the combination can make a triangle by considering the fact that sum * of any two sides of a triangle is greater than the remaining side. The * overlapping condition of links is handled separately in main(). */ int valid_triangle(struct point p0, double l0, struct point p1, double l1) { double dist = sqrt(pow((fabs(p1.z - p0.z)), 2) + pow((fabs(p1.y - p0.y)), 2) + pow((fabs(p1.x - p0.x)), 2)); if((max(dist, l0) == dist) && max(dist, l1) == dist) { return (dist < (l0 + l1)); } else if((max(dist, l0) == l0) && (max(l0, l1) == l0)) { return (l0 < (dist + l1)); } else { return (l1 < (dist + l0)); } } /* * Cosine rule is used to find the elbow angle. Positive value indicates a * counter clockwise angle while negative value indicates a clockwise angle. * Since this problem has at max 2 solutions for any given position of P0 and * P1, I am returning a structure of angles which can be used to consider angles * from both direction viz. clockwise-negative and counter-clockwise-positive */ void return_config(struct point p0, double l0, struct point p1, double l1, struct angles *a) { double dist = sqrt(pow((fabs(p1.z - p0.z)), 2) + pow((fabs(p1.y - p0.y)), 2) + pow((fabs(p1.x - p0.x)), 2)); double degrees = (double) acos((l0 * l0 + l1 * l1 - dist * dist) / (2 * l0 * l1)) * (180.0f / 3.1415f); a->clock_wise = -degrees; a->counter_clock_wise = degrees; } int main() { struct point p0, p1; struct angles a; p0.x = 15, p0.y = 4, p0.z = 0; p1.x = 20, p1.y = 4, p1.z = 0; double l0 = 5, l1 = 8; if(valid_triangle(p0, l0, p1, l1)) { printf("Three lengths can make a valid configuration \n"); return_config(p0, l0, p1, l1, &a); printf("Angle of the elbow point (clockwise) = %lf, (counter clockwise) = %lf \n", a.clock_wise, a.counter_clock_wise); } else { double dist = sqrt(pow((fabs(p1.z - p0.z)), 2) + pow((fabs(p1.y - p0.y)), 2) + pow((fabs(p1.x - p0.x)), 2)); if((dist <= (l0 + l1)) && (dist > l0)) { a.clock_wise = -180.0f; a.counter_clock_wise = 180.0f; printf("Angle of the elbow point (clockwise) = %lf, (counter clockwise) = %lf \n", a.clock_wise, a.counter_clock_wise); } else if((dist <= fabs(l0 - l1)) && (dist < l0)){ a.clock_wise = -0.0f; a.counter_clock_wise = 0.0f; printf("Angle of the elbow point (clockwise) = %lf, (counter clockwise) = %lf \n", a.clock_wise, a.counter_clock_wise); } else printf("Given combination cannot make a valid configuration\n"); } return 0; } However, this solution makes sense only in 2-D. Because clockwise and counter-clockwise are meaningless without an axis and direction of rotation. Returning only an angle is technically correct but it leaves a lot of work for the client of this function to use the result in meaningful way. How can I make the changes to get the axis and direction of rotation ? Also, I want to know how many possible solution could be there for this problem. Please let me know your thoughts ! Any help is highly appreciated ...

  Read the article

• Apache 2: I have multiple domain names I want to point to one Virtual Host. Do I use ServerAlias?

  - by Chris Altman

  I have multiple domain names, for example: www.foo.com www.goo.com www.moo.com www.coo.com I want all of these domain names to resolve to one website AND to redirect to www.foo.com What is the best method to achieve this? Multiple entries? Use ServerAlias? Something else? If the best method is ServerAlias, what is the syntax? ServerAlias www.goo.com, www.moo.com, www.coo.com

  Read the article

• ospfd over an OpenVPN link - strange error in logs

  - by Alex

  I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

  Read the article

• VLAN Through Switch Doesn't Work

  - by vcsjones

  I have the following scenario: I have a Cisco Aironet 1040 access point. I have it configured with two SSIDs, each going to a different VLAN. So: SSID internal : VLAN 90 SSID guest : VLAN 70 On the router side, I have a Cisco RV220W (with the radios now turned off) and have setup VLANs with like VLAN IDs. VLAN 90 : 192.168.90.0/24 VLAN 70 : 192.168.70.0/24 As far as DHCP is concerned, each VLAN has a "DHCP Server" in the router's configuration: So with the access point connected directly to the router, everything works great. I connect to the internal network, and I get a 192.168.90.x address, and the guest network gets a 70.xxx address. Next I introduced a Cisco SG200-50 PoE switch between the router and the access point. The port is configured as a trunk port, so the VLAN tags should go right through the switch back to the router. However, when something is connected to the access point, nothing works. It isn't able to get an IP address, and manually assigning one doesn't seem to let any traffic route. Given that the access point works correctly when connected to the router directly, I believe the switch is misconfigured. What am I missing here? What can I use to better diagnose what the problem might be? It's small business equipment, so CLI access is not available. Below are screenshots of the switch's config. The access point is connected to GE2.

  Read the article

• How can I make a sub-domain point to a dynamic IP and the rest of the domain as it is hosted on a server with static IP?

  - by sleeping_dragon

  Basically, I have a domain mydomain.com hosted by a certain hosting company on its servers. I have access to the cpanel and can make changes a s per required. However, I want to host a dvr remote interface on one of its pages. The DVR is in my office which has a dynamic IP address. I first thought of using the numerous free DDNS services available. But then since I already own a domain name I thought of using that one. How do I do it?

  Read the article

• Should the hostname of my VPS point to the dedi IP of my Domain or to to a shared one used for new account creation?

  - by thomas

  I leased a VPS which I want to use to sell shared hosting. 3 IPs - I call them A, B and C here for simplicity. Actual setup is: A=NS1.mydomain.com; host.mydomain.com and is used to set-up new accounts in shared environment B=NS2.mydomain.com C=dedicated IP for mydomain.com (SSL secured) The more I read about DNS, the more I get confused; thus my question: Is this configuration "Good Practice", especially the hostname pointing to A rather than to C? And what would be a better alternative?

  Read the article

• SQL Server 2008 Geography .STBuffer() distance measurement units

  - by Chris

  I'm working with a geographic point using lat/long and need to find other points in our database within a 5 mile radius of that point. However, I can't seem to find out what the "units" are for STBuffer, it doesn't seem to conform to feet, miles, meters, kilometers, etc. The documentation only refers to them as "units", any suggestions? Thanks [...] from geography::STGeomFromText('POINT(x y)', 4326).STBuffer(z).STIntersects(geography::STGeomFromText('POINT(' + CAST(v.Longitude as varchar(max)) + ' ' + CAST(v.Latitude as varchar(max)) + ')', 4326)) = 1

  Read the article

• My abstract class implements an interface but doesn't implement some of its methods. How do I make i

  - by Stefan Monov

  interface ICanvasTool { void Motion(Point newLocation); void Tick(); } abstract class CanvasTool_BaseDraw : ICanvasTool { protected abstract void PaintAt(Point location); public override void Motion(Point newLocation) { // implementation } } class CanvasTool_Spray : CanvasTool_BaseDraw { protected abstract void PaintAt(Point location) { // implementation } public override void Tick() { // implementation } } This doesn't compile. I could add an abstract method "Tick_Implementation" to CanvasTool_BaseDraw, then implement ICanvasTool.Tick in CanvasTool_BaseDraw with a one-liner that just calls Tick_Implementation. Is this the recommended workaround?

  Read the article

• FORMULA TO CALCULATE DIFFERENT COORDINATES FOR FLIGHT ROUTES IN KML

  - by xb

  I need to create flight routes in Google Earth. Example from point A to point B, How do i get the equivalent middle point for both and along point A to B, there are also many different coordinates joining so that the line would be a curve.

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >