Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 85/332 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Can a pc with a 1.2 ghz dual core run VS 2013? [on hold]

  - by moo2

  Edit: This question is about a tool used for programming, Microsoft Visual Studio 2013. I already read the minimum requirements for VS 2013 before I posted or I wouldn't have asked the question. I searched on the web for an answer for a few hours before posting. Why should I go out and spend $400 on a laptop if I can spend less than $100 and use it to learn how to program? In the context of the question it is clear I was not asking for advice on what laptop to buy and it was also clear I was not asking for someone to walk me through the system requirements of VS 2013. This is a vast community and I was wondering if someone in this vast community would have experience in dealing with my question. In other words has anyone ever tried anything like it? If I had an old computer sitting around I would have tested it. At the moment all I have is a friend's Chromebook I'm borrowing. End Edit. I know the requirements for Microsoft Visual Studio 2013 state 1.6 ghz processor. I'm looking at getting a laptop for school and I found one that is old but cheap and would work for college. The Dell D430 I'm looking at getting has a 1.2ghz Core 2 Duo CPU, 80GB HD, 2GB RAM, and Windows 7 Home Premium. It's refurbished. I can get it for less than most phone's cost and from a Microsoft Authorized Refurbisher. I know it's not a skyrim rig but it's lightweight and can handle being a college laptop and doing word processing. Would Visual Studio 2013 run at all? If it is slower I'm not concerned. I just want to know if it would work and compile my assignments and run them? I'd be using this laptop for doing assignments and learning programming languages not for coding the next social media sensation.

  Read the article

• Web Interfaces not opening even after Port Forwarding is said to be working!

  - by Ahmad

  I'm encountering this strange problem which has baffled me to the ground, and which I haven't encountered even after years of doing port forwarding .. ! I am hoping somebody here can help me solve this mystery .. :) My network configuration is as follows: I have a DSL modem (custom made and branded by my ISP) which is receiving a DSL stream ... it has an external IP which is visible to the world, say, 11.22.33.44 ... This modem has DHCP enabled, has an internal IP for itself, which is 192.168.1.1 .. it is connected to 2 laptops via and ethernet cable .. Laptop 1 has IP 192.168.1.2, and Laptop 2 has IP 192.168.1.3 ... On Laptop 1, two applications are running, jDownloader and Media Player Classic, which have their web interfaces on ports 8765 and 13579, respectively ... I can access both of these web interfaces from Laptop 2 by opening these addresses: 192.1681.2:8765 and 192.168.1.2:13579 ... both of their web interfaces open up, meaning the web interfaces are working fine .. Moving on, I now want to access these web interfaces from outside my network as well, and so I've configured port forwarding in my PTCL modem to forward all traffic on ports between 8000 and 14000 (both TCP and UDP) to IP 192.168.1.2 ... I have verified that port forwarding is working by testing it using PortForward.com's port checker tool, and this website too: [URL]http://www.yougetsignal.com/tools/open-ports/[/URL] When I use the website, if I'm running the applications on Laptop 2, the website reports that the port is open .. if I then close the application, the website reports the port is closed ... This makes sense as nothing is listening on my machine in the latter case .. Also, if I disable port forwarding in my modem, again, the website reports the port is closed ... so, the website's results seem to be okay ... Same of the above can be said when I'm used PortForward.com's port checker tool ... So again, everything okay so far ... Now, here comes the problem !! ... Despite the above tools reporting that port forwarding is working, I am unable to open the web interfaces from outside my network ... So for example, if I tried to browse 11.22.33.44:8765 or 11.22.33.44:13579, nothing opens in my browser ... But if I accessed these web server's locally from Laptop 3, by typing in 192.168.1.2:8765 or 192.168.1.2:13579, they opened ... So where is the problem here ?? The tools report unanimously that port forwarding is working, and yet I am unable to open the web interfaces from outside the network .. Also note that I have disabled the firewall from my computer, and have also made sure that any option in the above programs (whose web interfaces I am trying to open) that says only local connections are to be accepted, is disabled ... So whats the problem ... ?!! Any ideas ??

  Read the article

• Configure 27" 2560x1440 for a monitor with corrupt EDID

  - by Aras

  I am trying to get a monitor work with my Ubuntu laptop. The monitor is this cheap 27" Korean monitors which has a 2560x1440 resolution -- and nothing else. Here are some specifications of this monitor: 2560x1440 @60Hz Only one dual link DVI-D input -- no other input port (no HDMI or display port) no OSD no scalar reports corrupt EDID does 2560x1440 @60Hz, did I say that already? Anyways, the monitor works beautifully with my Ubuntu desktop which has an nVidia card with DVI output. However, I am having problem using this monitor with my laptop. After some searching around I found a few posts suggesting to use an active adaptor for mini display port, so I went and bought a mini display to dual link DVI-D adaptor.. When using this adaptor the monitor is recognized by nvidia-settings tool but with incorrect resolution information. As you can see the monitor is incorrectly recognized and there are no other resolution available to set. This post on ubuntu forums and this other post on overclock both suggest that the monitor is reporting corrupt EDID file. I have tried following their instructions, but so far I have not been able to display any image on the monitor from my laptop. The laptop I am using is an ASUS G75VW with a 1920x1080 screen. It has a VGA, an HDMI 1.4a, and a mini display port. The graphic card is an nvidia gforce gtx 660M with 2GB dedicated memory. I am running Ubuntu 12.10 on here which I upgrade from 12.04 a few weeks ago. As I said I have tried several suggestions, including specifying Modeline in xorg.conf and also linking to EDID files I found from those forum posts above. However, I am not sure if the EDID files I found are suitable for my monitor. I think the solution to my problem consist of obtaining the EDID file of my monitor and then fixing it and modifying xorg.conf to force nvidia driver to load the correct resolution. However, I am not sure what steps I need to take to do this. Here is the part of sudo xrandr --prop output that is related to this monitor: DP-1 connected 800x600+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm SignalFormat: DisplayPort supported: DisplayPort ConnectorType: DisplayPort ConnectorNumber: 3 (0x00000003) _ConnectorLocation: 3 (0x00000003) 800x600 60.3*+ I was expecting to see the EDID file in this output as was mentioned in this post, but it is not there. After several hours of tweaking X configurations, I decided it was time to ask for help here. I would really appreciate if someone with experience regarding EDID and X configuration could give me a hand to solve this issue.

  Read the article

• Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca

  - by Marlen T. B.

  I have recently (as of July 2012) bought a HP Pavilion dv6-6c40ca laptop. It came pre-installed with Windows 7 on an MBR. I installed Ubuntu 12.04 on it on a GPT partition in what I think is BIOS emulation mode. I made a BIOS-Grub partition so the install didn't fail. That is what it is for .. right? Now I want to upgrade to UEFI mode. How would I Install Ubuntu 12.04 in UEFI mode on a HP Pavilion dv6-6c40ca. Or is it impossible? My laptop, despite its new age may not be UEFI 2.0+ capable. If it isn't how can I install a software UEFI (i.e. a DUET such as the one by tianocore). Or is this too impossible? A link to my laptop's specs is: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03137924&tmp_task=prodinfoCategory&cc=ca&dlc=en&lang=en&lc=en&product=5218530 My laptop should have a UEFI given this link from HP http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01442956#N218. And from the link I draw a quote: That means most notebooks distributed with Windows Vista, and all notebooks distributed with Windows 7, have the UEFI environment. My laptop had Windows 7 Home Premium pre-installed. OK. Following the comments so far -- NOTE: I am trying to do this on an external drive so I can see if it works. I have partitioned the drive using GParted as a GPT drive. Created a 200MB partition at the beginning of the drive with a FAT32 file system. Given the 200MB partition a label of "EFI". Set the boot flag on the 200MB partition. What should a do next to install Ubuntu 12.04? Given the link: https://help.ubuntu.com/community/UEFIBooting#Selecting_the_.28U.29EFI_Graphic_Protocol In my first read through (just to see if I will understand everything before I start) I get to step 2.3 Install GRUB2 in (U)EFI systems The first line is Boot into Linux (any live ISO) preferably in UEFI mode. Um .. how do you tell what mode your live CD is in?! And how do you change it if the mode is wrong?

  Read the article

• Windows Vista: Networking can only connect "local only"

  - by Damien

  I am attempting to debug a problem on a Windows Vista laptop - not mine! Until just recently (last week or so), it was operating normally for about 4 years :) The problem is that I am having issues connecting to the local network (a basic wireless home router; more later) and the internet (via ADSL). This is both for wired [Broadcom chipset] and wireless [Intel chipset]. I will elaborate further later. To detail the network. I have three other clients (HTC phone, Ubuntu 12.04 desktop [wired] and Ubuntu 10.04 laptop [wireless]), all of whom are able to connect to the network and internet normally. A windows 7 virtual machine running on said desktop connects normally. I have tried two different wireless routers - Netgear DG834G and Netgear DGN3500. The same error mode is common to both. Updating the firmware to the latest on both routers does not help. Overall, it seems safe to say it's localised to the laptop in question. I do not have another Vista client to test with. The specific symptoms are as follows: When "connected", it says "Local Only", and says it cannot connect to the internet. This is true for both wired and wireless. It can get an IP address (192.168.0.5), and the router (192.168.0.1) reports that it can see the device. When I try to ping, I get the following results: ping 192.168.0.1 - (router) all packets lost ping 192.168.0.5 - (laptop's address) OK ping 192.168.0.4 - (desktop) all packets lost Pinging from the desktop to the problematic laptop results in "From 192.168.0.4 icmp_seq=1 Destination Host Unreachable" The most promising "fix" from trawling forums is KB928233 which does not work for me. The problem is persistent across reports (both full shutdown and hibernate) so it appears not to be sleep related. I am not a regular vista user, though I can fumble my way about a bit. Is there any other suggestions as to what I should do? Is there any further information I can provide?

  Read the article

• Save chromium browser's session

  - by Anwar Shah

  How to manually save session in chromium-brower. I have a Notebook with damaged battery (only gives 5~6 minutes of backup, planning to buy a new one), and in our country "Load Shedding" (power outages) is quite common. So, I had to close my session before shutting down my laptop. When I re-open chromium, there is no tab with previous session. The question is: How can i manually save my session before closing the laptop?

  Read the article

• Network Access: I can't access 192.168.1.101 from 192.168.1.102.

  - by takpar

  Hi, I'm running Ubuntu 10.04 on my PC with IP 192.168.1.101. every thing work fine, e.g. my web server is running and I can see http://localhost/ or http://192.168.1.101 properly. But the problem is that I cannot see my PC from my laptop at 192.168.1.102 e.g. at my laptop http://192.168.1.101 gives Connection timed out in browser. or trying to telnet on any port leads to: telnet: Unable to connect to remote host: Connection timed out laptop is running a fresh install of Ubuntu as well and there is no setup for firewall stuff in both computers. PS: Both computers can ping each other well. The router is a cicso linksys wireless ADSL modem. Currently, I can connect to FTP server on the Windows running on 192.168.1.102 from 192.168.1.101 without problem. Theses are commands ran on my PC, 192.168.1.101: ifconfig: adp@adp-desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:e1:8e:cf inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::226:18ff:fee1:8ecf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1831935 errors:0 dropped:0 overruns:0 frame:0 TX packets:1493786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1996855925 (1.9 GB) TX bytes:215288238 (215.2 MB) Interrupt:27 Base address:0xa000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:951742 errors:0 dropped:0 overruns:0 frame:0 TX packets:951742 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:494351095 (494.3 MB) TX bytes:494351095 (494.3 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:46:c0:00:01 inet addr:192.168.91.1 Bcast:192.168.91.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:46:c0:00:08 inet addr:192.168.156.1 Bcast:192.168.156.255 Mask:255.255.255.0 inet6 addr: fe70::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:51 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) port 80 is set to 0.0.0.0 well: adp@adp-desktop:~$ netstat -ln | grep 'LISTEN ' tcp 0 0 127.0.0.1:52815 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4559 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:4369 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:7634 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5269 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:25 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5280 0.0.0.0:* LISTEN tcp 0 0 127.0.1.1:7777 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:33601 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:5222 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN tcp6 0 0 :::139 :::* LISTEN tcp6 0 0 ::1:631 :::* LISTEN tcp6 0 0 :::445 :::* LISTEN /etc/hosts.deny is empty: adp@adp-desktop:~$ cat /etc/hosts.deny # /etc/hosts.deny: list of hosts that are _not_ allowed to access the system. # See the manual pages hosts_access(5) and hosts_options(5). # # Example: ALL: some.host.name, .some.domain # ALL EXCEPT in.fingerd: other.host.name, .other.domain # # If you're going to protect the portmapper use the name "portmap" for the # daemon name. Remember that you can only use the keyword "ALL" and IP # addresses (NOT host or domain names) for the portmapper, as well as for # rpc.mountd (the NFS mount daemon). See portmap(8) and rpc.mountd(8) # for further information. # # The PARANOID wildcard matches any host whose name does not match its # address. # # You may wish to enable this to ensure any programs that don't # validate looked up hostnames still leave understandable logs. In past # versions of Debian this has been the default. # ALL: PARANOID netstat -l: adp@adp-desktop:~$ netstat -l Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 localhost:52815 *:* LISTEN tcp 0 0 *:hylafax *:* LISTEN tcp 0 0 *:www *:* LISTEN tcp 0 0 *:4369 *:* LISTEN tcp 0 0 localhost:7634 *:* LISTEN tcp 0 0 *:ftp *:* LISTEN tcp 0 0 *:xmpp-server *:* LISTEN tcp 0 0 localhost:ipp *:* LISTEN tcp 0 0 *:smtp *:* LISTEN tcp 0 0 *:5280 *:* LISTEN tcp 0 0 adp-desktop:7777 *:* LISTEN tcp 0 0 *:33601 *:* LISTEN tcp 0 0 *:xmpp-client *:* LISTEN tcp 0 0 localhost:mysql *:* LISTEN tcp6 0 0 [::]:netbios-ssn [::]:* LISTEN tcp6 0 0 localhost:ipp [::]:* LISTEN tcp6 0 0 [::]:microsoft-ds [::]:* LISTEN udp 0 0 *:bootpc *:* udp 0 0 *:mdns *:* udp 0 0 *:47467 *:* udp 0 0 192.168.1.10:netbios-ns *:* udp 0 0 192.168.91.1:netbios-ns *:* udp 0 0 192.168.156.:netbios-ns *:* udp 0 0 *:netbios-ns *:* udp 0 0 192.168.1.1:netbios-dgm *:* udp 0 0 192.168.91.:netbios-dgm *:* udp 0 0 192.168.156:netbios-dgm *:* udp 0 0 *:netbios-dgm *:* raw 0 0 *:icmp *:* 7 netstat -rn: adp@adp-desktop:~$ netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.91.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet1 192.168.156.0 0.0.0.0 255.255.255.0 U 0 0 0 vmnet8 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 commands on the laptop, 192.168.1.102: ifconfig: root@fakeuser-laptop:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:33:a2:31:15 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:21 eth1 Link encap:Ethernet HWaddr 00:2d:d9:3e:1f:6c inet addr:192.168.1.102 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe70::21d:d9ff:fe3e:1f6c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5681 errors:0 dropped:0 overruns:0 frame:10313 TX packets:6717 errors:6 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4055251 (4.0 MB) TX bytes:779308 (779.3 KB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:206 errors:0 dropped:0 overruns:0 frame:0 TX packets:206 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:15172 (15.1 KB) TX bytes:15172 (15.1 KB) netstat -rn: root@fakeuser-laptop:~# netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth1

  Read the article

• I Choose iNada

  - by Mark Treadwell

  As a laptop and Kindle user, I have been looking at the usual cyclical Apple frenzy in the press with the same kind of amused tolerance I give my three-year-old son.  They never seem to learn, and they keep repeating the same things.  However when I ready articles like this, I am reminded that that is not always the case. I am a happy user of a monster-sized HP HDX laptop, HP touch screen all-in-one system, and multi-screen Dell desktops at home as well as a HP business laptop at work.  I have no iPod, iMac, iTouch or any other relationship with the company who wants to trademark the prefix “i”. I have not missed them. That is not to say that I have no technological gadgets.  I do.  They just do not dominate Every company wants to preserve their customer base, but Apple just does it too rigidly.  The buy-in necessary rubs me wrong.  When the fanboys scream about the next great iApple thing which will kill off another market segment (this time, the iPad will kill off laptops), the amused tolerance returns. From what I have seen, the iPad virtual keyboard is a poor substitute for an actual keyboard.  It was intended to let you get some kind of text into a device that is not really intended for keyboard input, but rather for touch manipulation of a designed interface.  I like the virtual keyboard on my LG Dare cell phone, but you will not catch me writing my next novel with it.  But, you hear, you can connect a real keyboard and get info from another computer.  That is when you realize that the iPad is not a true standalone device like a laptop.  You have to make more hardware purchases to get what you truly want.  It is an expensive accommodation to get you a different form of freedom. So if Apple made a product with me in mind, you can have it.  Everyone gets to make their own choice.  My choice is the iNada.

  Read the article

• WinXP - Having trouble sharing internet with 3G USB modem via ICS

  - by Carlos Nunez

  all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

  Read the article

• Cannot exit X server, restart, shutdown or drop to tty when VGA monitor active

  - by terdon

  I have a strange problem. If I connect an external VGA monitor to my laptop, exiting the X environment in any way crashes the computer. For example, say I am working with my two monitors (the laptop's and one connected to my VGA port) active. Hitting Ctrl+Alt+F Key should take me down to a tty. What actually happens is that the VGA screen goes blank, as you would expect, but the laptop screen, although still on, shows nothing. I know the screen is on because it is slightly more illuminated than when it is off. When in this state, I can do nothing to regain access to the machine. I have tried: Ctrl+F Key (and even Ctrl+Alt+F Key, just in case) combinations and none seem to have any effect. Ctrl+Alt+Del : Nothing Magic SysRq key: Nothing Blindly typing my username and password and trying to reboot/shutdown or restart GDM or MDM: Nothing The only thing that works is a hard reset. The exact same behavior occurs when kiling the X server through Ctrl+Alt+Backspace, rebooting or shutdown. There is no difference if I reboot/shutdown/log out using the WM's graphical menu or if I use the shutdown or rebootcommands. It is also not WM-dependent. I have the same problem using Cinnamon, Gnome 3, MATE and xfce4. It is, however, VGA dependent. I have tried connecting another VGA monitor and have the same problem. I do not, however, have this problem if a screen is connected to the DisplayPort. It is, therefore, a VGA specific issue. To make things even stranger, this only occurs when both screens are active. If either the laptop screen or the VGA monitor is inactive the problem goes away. Finally, this problem arose when I installed the latest Linux Mint Debian (LMDE). It did not occur with the previous release of LMDE. I am not sure what has changed since I used the same kernel version in both releases (I had upgraded the kernel while on the previous release) and, I think, the same nvidia drivers. Oh, and yes, I have updated the nvidia driver. Hardware: Dell M4500 laptop CPU: Intel Core i7 RAM: 8GB Graphics: nVidia GT216 [Quadro FX 880M] Software: LMDE, kernel 3.2.0-2-amd64 Xorg: 1.11.4 nVidia kernel: 295.20-1+3.2.9-1 Possibly relevant files: /var/log/Xorg.0.log ~/.xsession-errors Does anyone have any ideas how to fix this? Thanks in advance for any help.

  Read the article

• Running 12.04 on a Dell Inspiron 1545 having random system lockups

  - by Kris

  I just reinstalled a fresh 12.04 because I couldn't even get booted on my previous installation anymore. I just installed 8GB of ram on this laptop, but the problem happened even before this, and all I have installed in this run on Ubuntu is: ia32libs, Oracle JDK7 and the 32bit JRE junipernc jupiter The laptop has never been used very heavily, so could someone get back to me on this, let me know what further information you need about my machine, or files to upload. Thanks!

  Read the article

• Is Btrfs in Maverick considered stable?

  - by Hamish Downer

  I'm upgrading my laptop to Maverick (10.10) and I noticed btrfs is an option for the filesystem. I read a while ago that the Ubuntu team weren't sure if it was going to be stable for Maverick. Does anyone know (with references) if it was approved for stable use? Any other pros and cons? For the moment I've made my root partition ext4 and my home partition btrfs, but I could reinstall. My laptop is a secondary computer.

  Read the article

• How to Use Your Android Phone as a Modem; No Rooting Required

  - by Jason Fitzpatrick

  If your cellular provider’s mobile hotspot/tethering plans are too pricey, skip them and tether your phone to your computer without inflating your monthly bill. Read on to see how you can score free mobile internet. We recently received a letter from a How-To Geek reader, requesting help linking their Android phone to their laptop to avoid the highway robbery their cellular provider was insisting upon: Dear How-To Geek, I recently found out that my cellphone company charges $30 a month to use your smartphone as a data modem. That’s an outrageous price when I already pay an extra $15 a month charge just because they insist that because I have a smartphone I need a data plan because I’ll be using so much more data than other users. They expect me to pay what amounts to a $45 a month premium just to do some occasional surfing and email checking from the comfort of my laptop instead of the much smaller smartphone screen! Surely there is a work around? I’m running Windows 7 on my laptop and I have an Android phone running Android OS 2.2. Help! Sincerely, No Double Dipping! Well Double Dipping, this is a sentiment we can strongly related to as many of us on staff are in a similar situation. It’s absurd that so many companies charge you to use the data connection on the phone you’re already paying for. There is no difference in bandwidth usage if you stream Pandora to your phone or to your laptop, for example. Fortunately we have a solution for you. It’s not free-as-in-beer but it only costs $16 which, over the first year of use alone, will save you $344. Let’s get started! Latest Features How-To Geek ETC What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Make Efficient Use of Tab Bar Space by Customizing Tab Width in Firefox See the Geeky Work Done Behind the Scenes to Add Sounds to Movies [Video] Use a Crayon to Enhance Engraved Lettering on Electronics Adult Swim Brings Their Programming Lineup to iOS Devices Feel the Chill of the South Atlantic with the Antarctica Theme for Windows 7 Seas0nPass Now Offers Untethered Apple TV Jailbreaking

  Read the article

• GLX on NVIDIA OPTIMUS, Ubuntu 12.04

  - by Gabriel Theron

  I have a laptop that has an NVIDIA Optimus graphic card setup. I have tried running Minecraft on that laptop, and the game crashes after login, with the following error: org.lwjgl.LWJGLException: Could not init GLX I tried to update my drivers, but no driver update was available. I searched for people asking the same question and I found none, hence the following question: Is it possible to enable GLX on NVIDIA Optimus? If yes, how to? Thank you in advance.

  Read the article

• How To Utilize Dell INSPIRON 94000 Series Li-Ion Rechargable Battery For A Long Life

  Laptop Li-ion Batteries are becoming more popular as most Programmers are now being to go along with their PC';s in place of the secretaries,As your laptop PC has not connected to main energy outlet,i... [Author: Sekhar Somu - Computers and Internet - March 31, 2010]

  Read the article

• Wireless 802.11x Disconnects

  - by BillP3rd

  I've looked at (and read) all of the similar questions and none of them get exactly to the issue I'm having at home. I have an 802.11g access point (two, actually, with different SSIDs and on different channels). One is an Airlink AR525W. The other is a Linksys WRT54G v.2. The issue is that at random times, my laptop will lose its wireless connection. This occurs regardless of which access point I'm connected to. When I lose the connection, the affected AP no longer appears in the list of available APs. Also, it doesn't have anything to do with walls or distance. It can happen within 30' and when my laptop is literally within line-of-sight. When it loses the signal, it can take from 10 to 30 minutes to reconnect and it always will without intervention. I've done all the “standard” things to troubleshoot the problem and it has improved. For example, I surveyed other access points in my vicinity and have selected a different channel for each of my APs that no one else nearby is using. Both APs are configured WPA2/AES. I'm down to wondering [Note: This is not a shopping question. I'm not buying a new AP] if the fact that I didn't drop two bills on my APs and instead opted for more modest solutions has anything to do with it? I've oft wondered why anyone would go for the high-end AP when they didn't have to. Also, I am aware of DD-WRT and have chosen not to go there because only one of my APs is supported. Oh, and one final thing. It an HP x64 laptop running Windows 7 Ultimate. The wireless interface is an Atheros AR9285 802.11b/g/n WiFi Adapter. All the latest drivers and service packs have been applied. It did the same thing with my old laptop (a Lenovo) so I don't the problem is in the laptop. It's really annoying when this happens and suggestions of things I haven't thought of or may have overlooked (No, really. As unlikely as it is, I admit that I may have overlooked something :-)) are appreciated.

  Read the article

• network manager applet disappeared after upgrade

  - by Oleksa

  After last upgrade of 12.04 my network manager applet disappeared. When I try to start it from terminal I am getting the message: stasevych@stasevych-laptop:~$ nm-applet ** Message: applet now removed from the notification area nm-applet: symbol lookup error: nm-applet: undefined symbol: nm_secret_agent_get_registered stasevych@stasevych-laptop:~$ While bluetooth applet is well working, as well as nmcli works well from console.

  Read the article

• Problems to boot on Natty with Kernel 2.6.39.1

  - by Jorge Pinho

  I've installed this new Kernel version (2.6.39.1) and it seems to me that isn't stable. When i boot my laptop it blocks.... and it shows a Fail on Graphics... What is the problem? I've installed proprietary drivers FGLRX. My Laptop is a Acer Aspire 5542G AMD64 bits ATI Radeon HD4570 4gb Memory I'll wait for an answer, please... Here it is my proprietary graphics: This installation problem shows me this:

  Read the article

• 11.10 update manager upgrade to 12.04 fails

  - by Kane

  Currently using 11.10 on a new dell vostro 2420 laptop and wanted to upgrade to 12.04.01lte. Using the update manager and clicking the upgrade option first came up with a 'failure to authenticate' message and after a restart of the computer I click the upgrade and it will download 2 files then the popup closes and no further prompts/screens come up. Is there some issue with my laptop that will prevent an upgrade? Or should I just wait and try the upgrade again another day?

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• Wireless Broadcom 4313 not working on Ubuntu 12.04

  - by user88568

  It seems a lot of people are having this problem, but none of the posted solutions have worked for me so far. My driver is installed and activated, I have tried removing and re-adding the network, and various other fixes. No networks were picked up on my first boot, the next day wireless worked fine, and since then it does not detect networks, and when I manually try to connect, it repeatedly asks for the password and does not connect. Here's my info: 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) Subsystem: Dell Inspiron M5010 / XPS 8300 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0500000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [58] Vendor Specific Information: Len=78 Capabilities: [48] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [d0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [13c] Virtual Channel Capabilities: [160] Device Serial Number 00-00-a1-ff-ff-f3-70-f1 Capabilities: [16c] Power Budgeting Kernel driver in use: wl Kernel modules: wl, bcma, brcmsmac root@michelle-laptop:/home/michelle# ifconfig eth0 Link encap:Ethernet HWaddr 70:f1:a1:f3:ba:ab inet6 addr: fe80::72f1:a1ff:fef3:baab/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:29 TX packets:0 errors:30 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 eth1 Link encap:Ethernet HWaddr f0:4d:a2:53:83:7a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:104 errors:0 dropped:0 overruns:0 frame:0 TX packets:104 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8000 (8.0 KB) TX bytes:8000 (8.0 KB) root@michelle-laptop:/home/michelle# lsmod Module Size Used by dm_crypt 22528 0 snd_hda_codec_hdmi 31775 1 snd_hda_codec_realtek 174313 1 snd_hda_intel 32765 5 snd_hda_codec 109562 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec snd_pcm 80845 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 snd_rawmidi 25424 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 lib80211_crypt_tkip 17275 0 bnep 17830 2 rfcomm 38139 0 snd_timer 28931 2 snd_pcm,snd_seq snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq joydev 17393 0 wl 2646601 0 snd 62064 19 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 14635 1 snd btusb 17912 0 bluetooth 158438 11 bnep,rfcomm,btusb uvcvideo 67203 0 videodev 86588 1 uvcvideo snd_page_alloc 14108 2 snd_hda_intel,snd_pcm lib80211 14040 2 lib80211_crypt_tkip,wl intel_ips 17822 0 psmouse 72919 0 serio_raw 13027 0 mei 36570 0 dell_laptop 17767 0 dell_wmi 12601 0 dcdbas 14098 1 dell_laptop sparse_keymap 13658 1 dell_wmi mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp usbhid 41906 0 hid 77367 1 usbhid wmi 18744 1 dell_wmi i915 414817 3 atl1c 36718 0 drm_kms_helper 45466 1 i915 drm 197692 4 i915,drm_kms_helper i2c_algo_bit 13199 1 i915 video 19068 1 i915 root@michelle-laptop:/home/michelle# iwlist scan lo Interface doesn't support scanning. eth1 Interface doesn't support scanning. eth0 No scan results root@michelle-laptop:/home/michelle# rfkill list 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: dell-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no Obviously I don't know what I'm doing. I'd appreciate any help! Thanks!

  Read the article

• Ubuntu 12.04.3 - Graphics Driver: Default vs Nvidia 319-recommended vs Nvidia 319-updated

  - by Navraj

  Background: I switched from default driver to Nvidia-319-recommended. I am guessing that this update has caused issues with Keyboard shortcuts, battery status icon disappearing as well as power management issues as speculated by others. Closing laptop lid no longer suspends laptop - It has to be manually done by licking 'suspend' before closing lid. Question: How do you restore the original/default graphics driver? Thanks for your help. Regards

  Read the article

• How To Make Compaq Presario C717NR Li-ion Rechargable Battery For Optimal Time

  Laptop Power packs were appearing more common as many Programmers are now being accompanied with the Laptops in place of the Personal Assistants. When your notebook/laptop has not joined to primary p... [Author: Sekhar Somu - Computers and Internet - May 17, 2010]

  Read the article

• Booting Ubuntu on HP Pavilion g7 - 13.04 [duplicate]

  - by death2040

  This question already has an answer here: My computer boots to a black screen, what options do I have to fix it? 24 answers I have a HP Pavilion G7 with an AMD A4 processor and Radeon graphics. I want to install Ubuntu on my laptop but whenever I put the Ubuntu live CD in it and boot to it, the screen shows the Ubuntu logo and the four little dots then after about a minute or two the screen goes black. I can tell the screen is still on but it doesn't have anything on it. I'm beginning to wonder if its a driver problem but I can't really install the drivers when I cant even get Ubuntu to show anything except a loading screen. I've already tried using 12.04 and 12.10 and all the others down to Ubuntu 10. none of them worked. All the other versions don't even show the Ubuntu logo. I'd prefer to have Ubuntu 13.04 on it if its possible but I haven't had any luck finding a solution. I've also tried using WUBI installer in Windows 7 but all that did was make my computer slower for windows and it does the same with the screen when i boot it to Ubuntu. I'm trying to use Ubuntu alongside Windows 7. I cant find any solution on Google. It wont load anything and I know that there is a program called grub on Ubuntu that I used on my desktop computer when it had graphics trouble but the trouble with my desktop was minor things like the screen would flash and then show weird patterns on the screen. But I can't find anything on what to do with the HP laptop. Please help. I use this laptop a lot for games on Windows 7 and I just want to use Ubuntu for when I take my laptop to school and for school stuff. Edit: I just tried booting it in nomodeset and some other things and still didn't work. It did boot up but now when it goes to install alongside windows it crashes and says Ubuntu is forcing reboot or something like that Also, this question is different from the black screen at boot issue because when I do use nomodeset on my computer and select install Ubuntu it will go as far as the screen where you can choose to replace Windows or run alongside Windows. Then after I click continue it ejects the live CD and turns off my computer without installing anything. The error message it shows when it ejects the disk says signal 15, shutting down - modem manager [1675]: <info> Caught nm-dispatcher.action: Caught signal 15, shutting down... *Deconfiguring network interfaces... Please remove installation media and close the tray (if any) then press ENTER *Deactivating swap... *Stopping remaining crypto disks... *stopping early crypto disks... unmount: /run/lock: not mounted unmount: /run/shm: not mounted

  Read the article

• installing Ubuntu 32 bit and Lubuntu 64 bit with the same home directories

  - by rakesh

  Mine is a 64 bit machine and I had installed "32" bit Ubuntu to try it out and hence installed many apps and developed many things and configured it for many things. Now it seems that my laptop needs more resources as my development needs so much. My question is :to free up install Lubuntu "64" bit in other partition which uses the same home directory and apps and my development rendering my laptop to be faster than before. Is this possible ? Thanks in Advance.

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >