Search Results

Search found 27870 results on 1115 pages for 'standard output'.

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

Page 85/1115 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

  • Abnormally high amount of Transmit discards reported by Solarwinds for multiple switches

    - by Jared
    I have several 3750X Cisco switches that, according to our Solarwinds NPM, are producing billions of transmit discards per day. I'm not sure why it's reporting these discards. Many of the ports on the 3750X's have 2960's connected to them and are hardcoded as trunk ports. Solarwinds NPM version 10.3 Cisco IOS version 12.2(58)SE2 Total output drops: 29139431: GigabitEthernet1/0/43 is up, line protocol is up (connected) Hardware is Gigabit Ethernet, address is XXXX (bia XXXX) Description: XXXX MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, media type is 10/100/1000BaseTX input flow-control is off, output flow-control is unsupported ARP type: ARPA, ARP Timeout 04:00:00 Last input 00:00:47, output 00:00:50, output hang never Last clearing of "show interface" counters 1w4d Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 29139431 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 35000 bits/sec, 56 packets/sec 51376 packets input, 9967594 bytes, 0 no buffer Received 51376 broadcasts (51376 multicasts) 0 runts, 0 giants, 0 throttles 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored 0 watchdog, 51376 multicast, 0 pause input 0 input packets with dribble condition detected 115672302 packets output, 8673778028 bytes, 0 underruns 0 output errors, 0 collisions, 0 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier, 0 pause output 0 output buffer failures, 0 output buffers swapped out sh controllers gigabitEthernet 1/0/43 utilization: Receive Bandwidth Percentage Utilization : 0 Transmit Bandwidth Percentage Utilization : 0

    Read the article

  • Is there a "standard" way to make daemon in Debian?

    - by Kuroki Kaze
    I need to create a daemon from the application in Debian. Is there any standard tool for this in Debian like "upstart" in Ubuntu? I need only start-stop commands, to start a program as a daemon with some options and a pid file and kill it with pid file. I looked at init.d but it seems these are for boot-time launch. I want to start my daemon manually.

    Read the article

  • How do I ask screen to behave like a standard bash shell?

    - by thornomad
    Just learned about the screen command on linux - it is genius. I love it. However, the actual terminal/prompt in screen looks and behaves differently than my standard bash prompt. That is, the colors aren't the same, tab completion doesn't seem to work, etc. Is there a way I can tell screen to behave just like a normal (at least, normal as in what I am used to) bash prompt ?

    Read the article

  • Using proxy server to redirect MySQL traffic to multiple servers using standard port?

    - by FrenchFry
    Is it possible to redirect MySQL (tcp) traffic to multiple servers based on domain name alone? Our DNS is setup to point several sub-domain aliases to one proxy machine. (running haproxy and iptables). We would like to redirect all database traffic through this proxy server and route it to the appropriate db server, WITHOUT deviating from the standard MySQL port. dev.domain1.com:3306 -- dbDevServer.domain1.com:3306 test.domain1.com:3306 -- dbTestServer.domain1.com:3306 prod.domain1.com:3306 -- dbProdServer.domain1.com:3306 Thanks!

    Read the article

  • Does Control Zone touchpad in HP notebooks have standard LMB/RMB clicks at the bottom of touchpad?

    - by user1825608
    I wanted to buy: http://www.x-kom.pl/p/203762-ultrabook-15-6-hp-envy-15-x360-u000ew-i5-4210u-4gb-1000-win81.html# but now I see it does not have normal touchpad but this one which does not work as it should in Spectre 13. The deal is that every video says about those new features (which will be outdated when Windows 9 will come by) not about if it still has standard LMB/RMB click. Question: Does or does not Control Zone touchpade have mechanical left and right mouse button area at the bottom of it as every other touchpad?

    Read the article

  • Is there a Standard or Best Practice for Perl Programs, as opposed to Perl Modules?

    - by swestrup
    I've written any number of perl modules in the past, and more than a few stand-alone perl programs, but I've never released a multi-file perl program into the wild before. I have a perl program that is almost at the beta stage and is going to be released open source. It requires a number of data files, as well as some external perl modules -- some I've written myself, and some from CPAN -- that I'll have to bundle with it so as to ensure that someone can just download my program and install it without worrying about hunting for obscure modules. So, it sounds to me like I need to write an installer to copy all the files to standard locations so that a user can easily install everything. The trouble is, I have no idea what the standard practice would be for this. I have found lots of tutorials on perl module standards, but none on perl program standards. Does anyone have any pointers to standard paths, installation proceedures, etc, for perl programs? This is going to be complicated by the fact that the program is multi-platform. I've been testing it in Linux, but its designed to work equally well in Windows.

    Read the article

  • Is there a Standard or Best Practice for Perl Progams, as opposed to Perl Modules?

    - by swestrup
    I've written any number of perl modules in the past, and more than a few stand-alone perl programs, but I've never released a multi-file perl program into the wild before. I have a perl program that is almost at the beta stage and is going to be released open source. It requires a number of data files, as well as some external perl modules -- some I've written myself, and some from CPAN -- that I'll have to bundle with it so as to ensure that someone can just download my program and install it without worrying about hunting for obscure modules. So, it sounds to me like I need to write an installer to copy all the files to standard locations so that a user can easily install everything. The trouble is, I have no idea what the standard practice would be for this. I have found lots of tutorials on perl module standards, but none on perl program standards. Does anyone have any pointers to standard paths, installation proceedures, etc, for perl programs? This is going to be complicated by the fact that the program is multi-platform. I've been testing it in Linux, but its designed to work equally well in Windows.

    Read the article

  • What are some typing patterns using a standard QWERTY keyboard that work well for you as a programme

    - by OrbMan
    After hunting and pecking for about 35 years, I have decided to learn to type. I am learning QWERTY and have learned about 2/3 of the letters so far. While learning, I have noticed how asymmeterical the keyboard is, which really bothers me. (I will probably switch to a symmetrical keyboard eventually, but for now am trying to do everything as standard and "correct" as possible.) Although I am not there yet in my lessons, it seems that many of the keys I am going to use as a C# web developer are supposed to be typed by the pinky of my right hand. Are there any typing patterns you have developed that are more ergonomic (or faster) when typing large volumes of code rife with braces, colons, semi-colons and quotes? Or, should I just accept the fact that every other key is going to be hit with my right pinky? It is not that speed is such a huge concern, as much as that it seems so inefficient to rely on one finger so much... As an example, some of the conventions I use as a hunt and pecker, like typing open and close braces right away with my index and middle finger, and then hitting the left arrow key to fill in the inner content, don't seem to work as well with just a pinky. What are some typing patterns using a standard QWERTY keyboard that work really well for you as a programmer? Update: US layout and I use home row Update 2: Despite my best efforts to the contrary, people are interpreting this questionas "how do I learn to type" or "what keyboard should I use". Take it as a given, that I will learn to type, and that I will be doing so on a standard QWERTY layout keyboard, not DVORAK. I am interested in aquiring a skill that will be useful wherever I go.

    Read the article

  • Multiple monitors with MAC latop/PC: how to switch output?

    - by Dane Jung
    I have two monitors, a PC that uses both of them, and a MAC laptop. The dilemma in my mind is how to keep the two monitor state in the PC active, while still being able to switch one monitor to the laptop's output. Is this even possible? I figure as soon as output is switched, my PC will detect a monitor has been unplugged, and will switch to a one-monitor state. The ideal would be to have a switch that switches from the PC two monitor output state to one where one monitor is being used by the MAC. Thanks for any help, Dane

    Read the article

  • Why is my Output distorted after encoding with Expression Encoder?

    - by WernerCD
    I'm a "n00b" when it comes to re-encoding files. I'm trying to re-encode an AVI into a silverlight container via Encoding Video using Expression Encoder 4.0. As you can see in the video, the left is the input and it looks/sounds fine. The right is the output and it... doesn't. I'm unsure of where to go from here. I'm not sure why the output is jacked up, since the input looks fine. Input Video properties: AVI 2.49GB 22:34 809x605 Video: TSCC 809x605 15fps [Stream 00] Audio: PCM 22050Hz mono 352kbps [Stream 01] Choice of output doesn't seem to matter, they all end up distorted like the picture shows.

    Read the article

  • Can Autodesk Flame run with an nVidia Quadro FX3800 SDI and output to preview through SDI???

    - by cragno
    I am running on Linux RHEL 4.3, DKU 5.0.1. Everything seems to be ok on the xorg.conf and init.cfg, but when I start my projects and Flame enables output to preview I start having preview on my SDI monitor and stop seeing on my main monitor (which is connected to the DisplayPort). Could it be posible that Flame needs Quadro FX4x00/5x00 series with dual DVI to output both monitors?? Cause the FX3800 has only one DVi (which is connected to the SDI card) and 2 DisplayPorts as additional output monitors. Anyone knows a config or workaround this problem?? Thanks ahead!!!

    Read the article

  • How to pipe differently the body of the curl answer and the printed output?

    - by Antoine Lizée
    I would like to print in the command line some output of curl, like the http headers, followed by the body of the answer processed by a stdin/stdout program. For instance: Print the status code: curl -s -w "%{http_code} \\n" -o "/dev/null" http://myURL.com And then process the output with a json parsing tool: curl -s http://myURL.com | python -mjson.tool I would like to do both with one command, and I have the feeling that it may be possible thanks to the -o option that makes the difference between the output of curl and the actual answer from the query. The problem is that -o writes directly to a file. Somebody's got a hack?

    Read the article

  • How to search a text file for strings between two tokens in Ubuntu terminal and save the output?

    - by Blue
    How can I search a text file for this pattern in Ubuntu terminal and save the output as a text file? I'm looking for everything between the string "abc" and the string "cde" in a long list of data. For example: blah blah abc fkdljgn cde blah blah blah blah blah blah abc skdjfn cde blah In the example above I would be looking for an output such as this: fkdljgn skdjfn It is important that I can also save the data output as a text file. Can I use grep or agrep and if so, what is the format?

    Read the article

  • Hardware question re Hauppauge WinTV-HVR 900 HD video/tv capture unit used with laptop with HDMI output laptop HDMI connection

    - by Bill
    I've ordered a Hauppauge WinTV-HVR 900 HD video/tv capture unit. It is mainly for use with my HP desktop running Windows 7 Professional, but I will want to use it occasionally with my partner's HP laptop running Vista Home Premium. The latter has an HDMI output which works perfectly with my LG 42" LCD TV, enabling display of BBC iPlayer and other catchup services. Will the live or recorded HD signal from the WinTV-HVR 900 HD connected to the laptop's USB input be output on the laptop's HDMI socket as HD? Come to that, will SD content be output? The reason I ask is that I had a problem with a Pinnacle unit which displayed OK on the laptop's screen but not on the TV screen (which did display all the normal Windows material). I've tried the Hauppage website, but it doesn't even acknowledge the existence of the WinTV-HVR 900 HD!

    Read the article

  • Using the Onboard VGA output with a PCIe video card. Both nVidia

    - by sebikul
    I have 2 video cards, one On board, a nVidia 6150SE nForce 430 and a PCIe nVidia GeForce GT 220 1GB DDR2 RAM I have already configured the PCIe card to use the dual monitor feature, using the VGA and HDMI ports, but now I want to add a third monitor, using the On board VGA port I have managed to enable the On board graphics processor, which is taking 400MB of ram, but I cant manage to use it, nvidia-settings does not detect it, like it's not usable (but is there) My questions are the following: How can I manage to get the On board VGA display to work together with the PCIe graphics card? If possible, how can I recover those 400 MB the on board card is taking (even without being used) or how can I get it to use the PCIe card available memory? System Details: Linux 2.6.35-28-generic i686 Ubuntu 10.10 (All updates installed) NVIDIA Driver Version: 260.19.06 (Official) If more info is needed please let me know. Here is the lspci output when the On board card is disabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) And this is when both are enabled: 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:01.3 Co-processor: nVidia Corporation MCP61 SMU (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:09.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 02:00.0 VGA compatible controller: nVidia Corporation GT216 [GeForce GT 220] (rev a2) 02:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Output of lshw -class display: *-display description: VGA compatible controller product: GT216 [GeForce GT 220] vendor: nVidia Corporation physical id: 0 bus info: pci@0000:02:00.0 version: a2 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:18 memory:df000000-dfffffff memory:c0000000-cfffffff memory:da000000-dbffffff ioport:ef80(size=128) memory:def80000-deffffff *-display description: VGA compatible controller product: C61 [GeForce 6150SE nForce 430] vendor: nVidia Corporation physical id: d bus info: pci@0000:00:0d.0 version: a2 width: 64 bits clock: 66MHz capabilities: pm msi vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:22 memory:dd000000-ddffffff memory:b0000000-bfffffff memory:dc000000-dcffffff memory:deb40000-deb5ffff If what I'm looking for is not possible, please tell me, so I can disable the On board card and recover those 400MB of wasted RAM Thanks for your help!

    Read the article

  • Can I get any logging and error output from Flash?

    - by Dave M G
    To further provide better information for my other question about browsers and Pulse audio, I wanted to see if I could get some kind of helpful log information. I've looked at logs from both Pulseaudio and Firefox, but don't see anything like an error in either of them. The problem I'm experiencing may be coming from Flash. Is there a way I can trap specifically any log output from Flash? Update: I've downloaded the Linux Flash Player 10.3 Plugin content debugger, and I've installed libflashplayer.so in ~/.mozilla/firefox/plugins/, and copied the user/* files to /user. I've also set up mm.cfg to say: ErrorReportingEnable=1 TraceOutputFileEnable=1 MaxWarnings=50 TraceOutputFileName=/home/dave/.macromedia/Flash_Player/Logs/flashlog.txt And I rebooted just to be sure everything was starting fresh. However, after playing a Flash video from Youtube, flashlog.txt is not being generated. How can I be sure that logging is in fact enabled, so I can tell whether I'm simply not getting errors or I haven't set up logging correctly?

    Read the article

  • Lubuntu upgrade to 13.04 killed sound with ALSA. How to troubleshoot?

    - by Sven
    After upgrading to 13.04 from 12.10 Lubuntu lost audio playback after unplugging usb soundcard (Polycom) and plugging it back in. Volume control was gray and leading to pulseaudio mixer (not installed) so I uninstalled the pulseaudio package. I also removed and reinstalled the alsa-base package. After restart I have the alsamixer back everything seemingly as usual(volume 100%, unmute) but every sound program gets me errors no matter what device I select. aplay -L: null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server default:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device sysdefault:CARD=NVidia HDA NVidia, ALC662 rev1 Analog Default Audio Device front:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Front speakers surround40:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Digital IEC958 (S/PDIF) Digital Audio Output hdmi:CARD=NVidia,DEV=0 HDA NVidia, HDMI 0 HDMI Audio Output dmix:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample mixing device dmix:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample mixing device dmix:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample mixing device dsnoop:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct sample snooping device dsnoop:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct sample snooping device dsnoop:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct sample snooping device hw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Direct hardware device without any conversions hw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Direct hardware device without any conversions hw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Direct hardware device without any conversions plughw:CARD=NVidia,DEV=0 HDA NVidia, ALC662 rev1 Analog Hardware device with all software conversions plughw:CARD=NVidia,DEV=1 HDA NVidia, ALC662 rev1 Digital Hardware device with all software conversions plughw:CARD=NVidia,DEV=3 HDA NVidia, HDMI 0 Hardware device with all software conversions default:CARD=Communicator Default Audio Device sysdefault:CARD=Communicator Default Audio Device front:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Front speakers surround40:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.0 Surround output to Front and Rear speakers surround41:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio IEC958 (S/PDIF) Digital Audio Output dmix:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample mixing device dsnoop:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct sample snooping device hw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Direct hardware device without any conversions plughw:CARD=Communicator,DEV=0 Polycom Communicator, USB Audio Hardware device with all software conversions etc/asound.conf: defaults.ctl.card 1 defaults.pcm.card 1 defaults.pcm.device 1 Following gets same result with both devices. aplay -vv -D front:CARD=NVidia,DEV=0 "Release the Pressure.wav": Playing WAVE 'Release the Pressure.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono aplay: set_params:1087: Channels count non available Guayadeque mp3 playback: AL lib: alsa_open_playback: Could not open playback device 'default': No such file or directory 21:32:14: Error: Gstreamer error 'Configured audiosink playbackbin is not working.' Audacious: ALSA error: snd_mixer_attach failed: No such file or directory. ALSA error: snd_pcm_open failed: No such device. So How do I fix my audio? UPDATE: I removed the usb soundcard and got rid of all alsa config. Everything is working as before the install but it sure feels fragile.

    Read the article

  • Is there a better approach to speech synthesis than text-to-speech for more natural output? [closed]

    - by Anne Nonimus
    We've all heard the output of text-to-speech systems, and for anything but very short phrases, it sounds very machine-like. The ultimate goal of speech synthesis systems is to pass a Turing test of hearing. Clearly, the state of the art in text-to-speech has much to improve. However, speech synthesis isn't restricted to just text-to-speech systems, and I'm wondering if other approaches have been tried with better success. In other words, has there been any work done (libraries, software, research papers, etc.) on natural speech synthesis other than text-to-speech systems?

    Read the article

  • What is a good design pattern and terminology for decoupling output?

    - by User
    I have a program where I want to save some data record. And I want the output type to be flexible such that I could save the data record to a text file, xml file, database, push to a webservice. My take on it would be to create an interface such as DataStore with a Save() method, and the concrete subclasses such as TextFileDataStore, DatabaseDataStore, etc. What is the proper name/terminology for this type of pattern (I'm using the term "DataStore", log4net names things "appenders", .net they talk about "providers" and "persistence")? I want to come up with good class names (and method names) that fit with a convention if there is one. can you point me to a decent example, preferably in C#, C++, or java? Update Managed to find this stack overflow question, Object persistence terminology: 'repository' vs. 'store' vs. 'context' vs. 'retriever' vs. (…), which captures the terminology part of my question pretty well although there's not a decent answer yet.

    Read the article

  • New &lt;%: %&gt; Syntax for HTML Encoding Output in ASP.NET 4 (and ASP.NET MVC 2)

    [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] This is the nineteenth in a series of blog posts Im doing on the upcoming VS 2010 and .NET 4 release. Todays post covers a small, but very useful, new syntax feature being introduced with ASP.NET 4 which is the ability to automatically HTML encode output within code nuggets.  This helps protect your applications and sites against cross-site script injection...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

facebook twitter digg google delicious technorati stumbleupon myspace wordpress linkedin gmail igoogle windows live tumblr viadeo yahoo buzz yahoo mail yahoo bookmarks favorites email print

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >