Search Results

Search found 3797 results on 152 pages for 'talk'.

Page 85/152 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Recover data from phyiscally damaged harddrive. What are my options?

  - by Michael Kniskern

  I was trying to replace the power supply in my desktop PC and ended up physically damaging the data connection from the hard drive to the motherboard. The plastic shelf for the copper prongs on the hard drive broke into the cable. Here is a picture of my handy work: Picture of damage I went to Best Buy Geek Squad to discuss my options and they said that they will need to send it to the recover center it could cost anywhere between $250 to $1600 USD to recover the data out the hard drive Is this reasonable for data recovery from a phyiscally damaged hard drive? Are there any other options I can explore? I am going to talk to the data doctors to see what my options are.

  Read the article

• Server 2012 Storage Pools, Raid Controller... can the Storage Pool deal with it?

  - by TomTom

  Before trying it out - I don't find any documentation. Given that Storage Pools have serious performance problems with parity, and do not rebalance data at the moment when you add discs, my preferred way to use them would be as think provisioned space, ISCSI targets - with every "Pool" running against 1 RAID that comes from a Raid controller (who also introduces SSD read and write caching - another thing missing from Storage Pools). The main question is - how does a Storage Pool handle the change in the underlying disc that can happen? I mostly talk about OCE (Online Capacity Expansion), where a disc after an expansion suddenly reports a larger space. Standard Windows allows you to use this additional space (and expand the partitions). How does a storage pool handle it?

  Read the article

• Host not visible in ECC after pushing master agent on server

  - by wildchild

  Hi all!! ECC master Agent has been pushed to one of the servers.. Once a Master Agent installed the host should appear within ECC.However, I am unable to see the host. I asked the Server team to stop and start the master agent ,and to check whether required port is enabled, so that server can talk with ECC server. After restarting the service I get an error.I even checked if the port is used by any other service ,it is not.. Somebody plz help what should done here..it’s a Windows server. Here's the error:- "The EMC control Center Master agent service on local computer atrted and the stopped.Some services stopped automatically if they 've no work to do,for example prformance logs and alert services" Thanks in advance!!

  Read the article

• Dell Power Edge R515 - Replacing a Bad Hard Drive in a RAID

  - by LonnieBest

  I've ordered a new hard drive to replace a bad one in a Dell Power Edge R515. The manual covers obvious topics regarding physical replacing of hard drives, but I've never done this before on a production server where RAID is involved. I've heard people talk about this topic, and I've heard that some servers have RAID controllers that are smart enough to allow you to just put in the new drive (hot swap), and then the server will know automatically how to rebuild that drive to be what the old one was to the system. Where do I find the proper procedure for replacing a failed hard drive on a live production Dell Power Edge R515? Can someone with experience tell me how easy or hard this usually is?

  Read the article

• How do I make a virtualised WAN?

  - by EnchantedEggs

  I want to create a virtualised WAN. As in, I want to have a couple of VMs (VBox) on one physical host machine, that exist on separate LANs, but that can talk to each other. Do I make the VMs, set them up with different IP addresses (e.g. 1.2.3.4 and 5.6.7.8) and then configure port forwarding between them somehow??? I've seen articles that set up port forwarding on port 2222, but I don't really understand why this works. How is setting up the VM to listen to port 2222 and then port forward from there to, say, port 80, any different from just telling the VM to listen on port 80 in the first place? FYI, the VMs run Ubuntu Desktop 14.x.

  Read the article

• As a small business about to overhaul infrastructure and go virtual, how can we take advantage of all the features of the QNAP TS-439 Pro II+?

  - by Sally

  Specifically, how can we benefit from these current list of features? We're very new to this and I want to be able to talk intelligently to our IT consultant. VMware Ready Citrix Ready Built-in iSCSI target service Virtual Disk Drive (via iSCSI Initiator) Remote Replication Multi-LUN per Target LUN Mapping & LUN Masking Support SPC-3 Persistent Reservation Support What other products should we compare this QNAP to? I appreciate how informative the site is, but they only seem to sell their products through a small number of channels. Is QNAP well known? TIA!

  Read the article

• Trying to make changes to the size of the events buffer in prelude-ids auditd plugin

  - by tharris

  I am running systems using the prelude-ids plugin for auditd. When the manager is up every thing works fine however I have a requirement that when the clients can't talk to the manager they should store no more than 250MB of messages, and when they hit that point they should start deleting the oldest events. All I can find is that audispd can be set to an overflow action of ignore,syslog,suspend,single, and halt none of which meet my requirement, and several of which I really cannot use. Does anyone know a way to do this? I know the events get stored in /var/spool/prelude/auditd/global, but I can't find anything about configuring how things are stored here. There are usually several files in the global directory but only 2 of them ever go above 0 in size, data0 and data0.journal.

  Read the article

• Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

  - by sxanness

  I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

  Read the article

• Wireless bridge between two prolink adsl modem/router

  - by MyName

  Allright, so i've got 2 prolink hurricane h5004n. Its a broadband adsl modem and router. My Pc is connected to the first one via ethernet. What i want to do is a wireless bridge to make the 2 routers "talk". I've tried hooking up the dsl cable (as they are modems) in both to try but when one disconnects as the other connects. I don't really know about the configurations to be done of all the DCHP or RIP and NAT forwarding stuffs. (i'm just writing what i saw) In short i want the second router to act as a wifi repeater but i don't see any repeater option and i also do not want to connect them via ethernet. So is it possible to do something? Apart from buying another repeater i don't want to spend anymore i'm done :S

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• Disable mouse hotkeys in Chrome

  - by John Ruiz

  Does anyone know how I can get Chrome to stop using my mouse buttons as hotkeys for a Logitech MX518 gaming mouse? I have the mouse driver and software suite (SetPoint) installed. Unfortunately, SetPoint does not provide per-application settings, so that route is not an option. No matter what I do in SetPoint, Chrome captures my side mouse buttons and uses them as a forward/back hotkey. I want to turn this off because I use those buttons for my push-to-talk in Mumble/Ventrilo. Any idea how I can do this? edit: my set-point does not have a way to create per-application settings.

  Read the article

• Is there anyway to stop Windows 8 from restarting for an update?

  - by William Hilsum

  My Windows 8 machine is going to restart shortly... I have tried a few techniques such as shutdown /a which is not having much luck. Short of pausing the Windows Update service, is there anyway to stop this restart from happening? ---update--- Looks like the "restart" is all talk and no action! The time has gone and I am presented with this: So, it goes along with the top answer here (which I shall shortly accept) --- update again--- It did reset!!! My battery went critical and it turned itself off, I turned it back on (out of suspend) when it was plugged in, I logged in and the first thing it did was automatically restart - closing my open tabs in Chrome :( Oh well...

  Read the article

• TCP Windows Size vs Socket Buffer Size on Windows

  - by Patrick L

  I am new to Windows networking. When people talk about TCP tuning on Windows platform, they always mention about TCP Window Size. I am wondering whether Windows uses the concept of "Socket Buffer Size"? On Windows XP, the TCP window size is fixed. We can set it using the TCPWindowSize registry value. How about Socket Buffer Size? How can we set Socket Buffer size on Windows? Can we set it to a value different from TCP window size?

  Read the article

• Distribute terrabyte files to the public from web server

  - by MarkJ

  Hi We need to set up a website which makes two or three large files publicly available - the files will be 1 or 2 terrabytes each. Although they will be public, in practise I expect only a relatively small number of scientists will want to download them. What is the best way to allow this? I've had a quick talk to a web-hosting provider (rackspace) and they suggested a hybrid solution. An entry-level managed server (we predict fairly low traffic for the website, but we do need to install some custom CGI software). Some cloud storage which hooks into Limelight Networks. This would host the large files, for download by FTP. It sounded OK to me but I know relatively little about server administration. Does it make sense? Thanks in advance, Mark

  Read the article

• new xp install, but it moves slow

  - by doug

  hi there I just installed new XP windows OS on a old laptop. I did also all the updates I was asked for. I installed also, the latest driver updates from the official laptop producer site. Now, when I try to use that laptop to talk on Yahoo! Messenger, the sound quality is very bad, and I barely hear what the other person is saying. Before I was reinstalling the XP the laptop were working fine. do you have any tips for me? What software utilities to try in order to improve it's performance? what software utilities to install in order to test it's performances?

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• Access 2 sites on same machine behind a router

  - by Luc

  Hello, I have several machines on my lan. On of them is running 2 web sites, first_web_site and second_web_site (each one in a dedicated NameVirtualHost). Another machine is running another site third_web_site. I would like to be able to access each one, within internet, with the url: first_web_site.domain.tld second_web_site.domain.tld third_web_site.domain.tld knowing that 2 sites are on the same machine. Can Apache help me to do this ? I have a machine that will have a apache server to be used for proxy purposes. I was talk to set up virtualhost on this one and use proxy server but I do not know how to do this. Could you please give me hints ? Thanks a lot, Luc

  Read the article

• Configuring sendmail to use one outbound MTA exclusively

  - by Charlie Martin

  I have a sendmail problem, and I'm anything but a sendmail guru -- I could use some help. My problem is that I have a system intended to be more or less an "appliance" -- it's not intended to have an admin. Because of this, it needs to be able to "call home" by sending email. As we have configured it, this works fine -- using sendmail, it finds the appropriate relay by looking up an MX record and everything works fine. Now, however, because of security concerns, we want to limit it to using exactly one relay, so for example relay.corp.example.com. Should the user configure it to use, say, fubar.example.com, the mail sending should fail or be deferred. I thought that by configuring sendmail with a /etc/mail/server.switch file containing hosts files without dns, I'd get that effect. This doesn't work -- instead, if it gets mail addressed to [email protected], it tries to talk directly to example.com, and ignores the configured server. Any ideas?

  Read the article

• Can a virtual mikrotik box bridge a hyper-v internal network with a hyper-v external network?

  - by mcfrosty

  I am trying to set up a Mikrotik router as a transparent firewall on my network. I got the machine working on a hardware MT box, but my boss wants the MT virtualized. I have been trying the set up where my virtual windows box talks to the Mikrotik via private or internal network on the Hyper-V host. I can get the two machines to talk, but as soon as I set up a bridge on the MT, all traffic ceases between the two. Is it possible to create a bridge for this purpose (having the MT silently in front of my firewalled server)? I could really use some help.

  Read the article

• One NIC going to sleep on Centos system

  - by sbleon

  I have two Dell boxes with two ethernet ports a piece. I have a cable directly connecting two of these ports, creating a tiny LAN with 10.3.3.x addresses. The other port on each box is hooked up to a switch and has a DHCP-supplied address to talk to the outside world. I've noticed that when scp'ing large files from one box to the other over the private LAN, the transfers sometimes stall. It appears that any other network activity on either box will cause the transfer to resume. Wake-on-LAN is disabled on all interfaces according to ethtool. What else could be causing these stalled transfers?

  Read the article

• Is there a lightweight MTA for Ubuntu 9.10 Desktop?

  - by Joe Casadonte

  I'm writing a Perl script to run as a cron job, and I want to email results & errors to a local account on the laptop. I'd like something that can talk SMTP (do any MTAs not adhere to SMTP?). I use Thunderbird 3, so I'll also need a POP/IMAP server (unless T-Bird can read straight from an mbox file; I'll have to check into that). No need for spam controls as I'll lock it down real tight, only accepting mail originating from the laptop itself. Thanks!

  Read the article

• IPV6 causing issue with DNS

  - by Mike Wells

  I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

  Read the article

• Asking for Credentials, when requesting shared folders on the server, regularly for domain users?

  - by MFH

  In our network, single domain controller, when some users (members of the domain) request shared folders on the server they are required to enter their credentials, the server is Windows Server 2008 R2, even checking to remember my credentials doesn't work, sometimes it shows this message: "The system has detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you", sometimes it shows different messages, when I try to recreate the case sometimes I failed, I searched Google for it, I didn't find useful results, some talk about kerberos, but we don't use kerberos, this keeps going each day or two, how to overcome this, I don't want these messages to appear to users?

  Read the article

• Issue Connecting two home networks

  - by Alex

  Hi, I have a home networking question. I have two DLINK wireless/wired routers in my house, connected to the Internet ISP. There are a 2 computers on each of the two networks. Network1: has 192.168.0.0 (gateway) Valid IP'S range - 192.168.0.1 - 192.168.0.10, with COMP1 having a fixed IP of 162.168.0.1 Network2: has 192.168.0.100 (gateway) Valid IP'S range - 192.168.0.101 - 192.168.0.110 with COMP2 having a static IP of 162.168.0.101, a WIRELESS printer on 192.168.0.102 Both routers have a netmask of 255.255.255.0 My need is to connect the two routers, so that I can Remote desktop for COMP1 to COMP2 and viceversa, and COMP1 to connect to the wireless printer on Network2. can anyone help to set this up so that the both networks can talk to each other. Any help is appreciated. -Alex

  Read the article

• How to bulk mail-enable contacts from AD in Exchange 2007?

  - by George Hewitt

  We have several thousand 'contacts' setup in AD already for a faxing system. We're migrating to an online fax provider that uses e-mail rather than plain old telephone. So, we've bulk edited all the AD records so that the 'mail' attribute is populated with the right e-mail address in the right format. Now, how do we enable these contacts within Exchange 2007? I've looked through http://technet.microsoft.com/en-us/library/bb684891.aspx but that only seems to talk about manually editing the CSV output to specify the external addresses. AD already knows the external e-mail addresses - I just need the info in Exchange! Any thoughts?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >