Search Results

Search found 3797 results on 152 pages for 'talk'.

Page 84/152 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

• 2 x Netgear GS724T (Dual GBIC) trunking issue

  - by Arthor

  I have the following: Netgear GS724T (Firmware Version V1.0.3_35, Protocol Version - 2.001.002) 4 x Indineon ISFP GBR/FC Settings STP Function - Enabled Fast Link - Enabled Trunking port 23,24, (21,22 - RJ45 cables, but not connected.) I have connected both switches via 2 fiber cables and want to use trunking. The problem I am having. Sometimes I get a an issue when none of the switches cannot talk with each other, nor the devices, sometime they can. The problem is irregular and no patten can be determined The statistics shows that when the switches does not work, they have RX errors If I remove one to the GBIC connections, then everything works as normal.] Question Does anyone have a solution for this please? Thanks

  Read the article

• Encrypt LAN and wifi traffic on small private network

  - by Grimlockz

  I need some advice about encrypt all traffic on a small private network running wi-fi and LAN traffic on 192.168.0.x network. The network would comprise of client laptops connecting to the wi-fi router (192.168.0.254) via ethernet connection or wireless. The main purpose of the server is for the client laptops to talk to two servers on different IP's (192.168.0.200 and 192.168.0.201) on ports 80 and 433. My main concern is having packet sniffers and what not getting access to the data. The only ways I see at the moment is to have VPN running on the network or use IPSec policy's to do this. Any other ways guys?

  Read the article

• Two Routers, Two Internet (1 Open, 1 PPTP) - Routing?

  - by SomeUser

  Hi there, I'm trying to setup two routers - one to route specific sites to a always-on PPTP VPN connection, the other for open internet access w/ firewall. First router is connected to Internet w/ built-in firewall. Second router is connected to a PPTP VPN connection. I was going to connect a wire between the routers and would like some insight on how to get both groups of systems (connected to each router) to talk between automatically. Even better would be to setup one gateway for certain sites and another for general Internet. The other option is to default all sites to the net and shoot others to the gateway or vice versa... Any insight so I can get a better grasp of this? Thanks!

  Read the article

• I just ordered 70/10 line, and need a new router I think?

  - by data_jepp

  Before I had the 25/5 line and the n standard router did just fine. Now it doesn't do the job. Online speedtest reads at 82 so I have the line. But my laptop is getting less than 30 in my room. My laptop has the following WiFi card: http://www.intel.com/content/www/us/en/wireless-products/centrino-advanced-n-6205.html What is this talk about 2,5 and 5ghz? Can my laptop be connected at once over both bandwidths? And that would let me use the full 70Mb over wifi? Hope it's ok to ask network questions here.

  Read the article

• Puppet master/agent basic setup

  - by lewap

  I'm trying to setup a basic puppet agent/master use-case with an agent server and a master. I've setup two servers with puppet and puppet master respectively. After the following setup of both servers: puppet master --no-daemonize --verbose puppet agent --test puppet cert --list to get the list, puppet cert --sign to sign it. puppet agent --test I get the message: err: Could not retrieve catalog from remote server: hostname was not match with the server certificate warning: Not using cache on failed catalog err: Could not retrieve catalog; skipping run err: Could not send report: hostname was not match with the server certificate What do I need to do in order to get the agent/master to be able to talk to each other?

  Read the article

• Recovering files that do not appear in the Recycle Bin, but are in the $Recycle.bin folder on external drive

  - by Zach Morgan

  Problem: I have an NTFS external drive with a $Recycle.bin folder on the root (E:/$Recycle.bin/) that has about 70gb worth of data. For whatever reason, the folder is no longer a hidden system file and no Windows machine I have used the drive on will show the files in the actual Recycle Bin. What I Want To Do: I want to atleast view the recycle bin files from this external, and all of the help articles I have read just talk about deleting the folder all together. I plan on reformating the drive, but first I need to see if there are any important deleted files. What Didn't Work: Recuva - didn't see any of my files Resetting the external's Recycle Bin via command prompt and moving the old $Recycle.bin files into the new external $Recycle.bin folder (I didn't read this anywhere, just made it up on my own)

  Read the article

• Send one invalid email response to sender

  - by Kafuka

  I discovered that my postfix/dovecot configuration isn't rejecting emails. If a person sends an email to an invalid email-address, it just drops it. I am fine with this behavior since I think it discourages spammers from mining emails (I have had some success). Recently a person I did not want to talk to emailed an address I cut off and didn't receive a response back. It would have saved me some problems if they knew to call me instead of sending 50+ emails. How would I configure Dovecot/postfix to send a message back to a sender of an email address and then limit this 1 per domain or unique email. Debian Stable Linux 3.6.5-linode47 Dovecot 1.2.15 Postfix 2.7.1 PSQL - backend if that matters

  Read the article

• Linux stretch cluster: MD replication, DRBD or Veritas?

  - by PieterB

  For the moment there's a lot of choices for setting up a Linux cluster. For cluster manager: you can use Red Hat Cluster manager, Pacemaker or Veritas Cluster Server. The first one has the most momentum, the second one comes by default with RH subscriptions and the last one is very expensive and has a very good reputation ;-) For storage: - You can replicate LUN's using software raid / md device - You can use the network using DRBD replication, which offers a bit more flexibility - You can use Veritas Storage Foundation technology to talk to your SANs replication technology. Anyone has any recommandations or experience with these technologies?

  Read the article

• dd-wrt Bonjour/ netbios etc on two subnets

  - by user72182

  Hi I was wondering if any clever people out there could help me. I have a network setup with two different subnets 192.168.1.0 and 192.168.0.0 one router is connected to a VPN (via OpenVPN) the other is not. Both routers have static routes to each other and a device on one can communicate to another without issues when using IP addresses. My problem is I want to use services like Bonjour, Netbios and Apple Talk across the two networks, which currently does not work. A laptop connected on one subnet will not see a laptop connected on another. Is there anyway that you can connect the two networks together so these sort of local service will work??? I guess I have to forward the boardcast packets but I have no idea how to do this. Thanks for any help...

  Read the article

• Just one client bound to address and port: does it make a difference broadcast versus unicast in terms of overhead?

  - by chrisapotek

  Scenario: I am implementing failed over for a network node, so my idea is to make the master node listens on a broadcast ip address and port. If the master node fails, another failover node will start listening on this broadcast address (and port) and take over. Question: My concern is that I will be using a broadcast IP address just for a single node: the master. The failover node only binds if the master fails, in other words, almost never. In terms of network/traffic overhead, is it bad to talk to a single node through a broadcast address or the network somehow is smart enough to know that nobody else is listening to this broadcast address and kind of treat it as a unicast in terms of overhead? My concern is that I will be flooding my network with packets from this broadcast address even thought I am just really talking to a single node (the master). But I can't use unicast because the failover node has to be able to pick up the master stream quickly and transparently in case it fails.

  Read the article

• newbie hard drive upgrade question

  - by musoNic80

  I have an Acer Aspire 3500WLMi laptop. It currently has a 40gb hard drive which I would like to upgrade. Could someone talk me through the process? I've listed my concerns/queries... Can I buy and install any 2.5" SATA or IDE hard drive into this machine? Should I buy somesort of USB caddy and clone my existing drive onto the new one via USB then physically swap the drives over? My current disk is partitioned to include a small amount of space for a Ubuntu install. Will a clone keep the current partition sizes or is it best for me to repartition once I've cloned? Many thanks.

  Read the article

• Monitoring bandwidth/latency/jitter between 2 sites?

  - by TheCleaner

  I have 2 sites connected via an MPLS network and I'd like to do the following: setup a host on each end that can "talk" back and forth between each other and somehow report/log what kind of throughput, jitter, latency, etc. they are experiencing between each other in 5 minute intervals. Something similar to Qcheck but that can be automated. Bottom line is I'm trying to determine if the WAN network is "stable" throughout the day or if something is wrong. We have video conferences between these sites and even at 1024kbps calls we are experiencing delays and jitter. I'm hoping to exonerate the network with some testing.

  Read the article

• Trouble accessing network drives in Windows 7

  - by Warlax

  Hi, Recently purchased a LaCiE network drive. Connected it to my router, configured it, added a user for myself. Installed the "Network Assistant" that came with it - no problem. Went to My Computer Network, found the network drive - was prompted for a login/password to see the contents, types \user and password (leading slash to get rid of DOMAIN) and accesses contents. There is one open share that I can access/mount without problem and there's another share with my user name as set-up via the network drive's web-based config. Double-clicked on that, prompted again. user/password doesn't work! It says I have no permissions but the user/pass combination is PERFECT. Some Windows Vista posts talk about a Local Security Policy menu - but that's nowhere to be found. Any ideas? (Windows 7 Professional BTW).

  Read the article

• Wireless technology - which is better: more single radio APs or less dual radio APs?

  - by gert_78

  We are currently talking to vendors of wireless solutions for a wireless deployment in a university campus with some 5000 students. One vendor is offering us a Cisco solution with a WLC 5508 controller and 69 2x2 MIMO Dual-band/Dual radio APs (Aironet AP 1042 model) The other vendor is offering us an Aruba solution with a 3600 controller and 96 2x2 MIMO dual band BUT single radio APs (Aruba AP93) Both vendors are charging 82.000 US$ (support, 3y service contracts, switches and additional required options all included of course) The Aruba vendor is trying to convince me that 96 single radio APs will give us more connection/users/capacity then the 69 dual radio APs. I have my doubts about that and since it is my core competence-domain I wanted to ask here the opinion of people that have a more profound knowledge and experience in this area. When you talk to vendors it's often hard to get objective information. So try to answer only if you are sure and please mention it if you are affiliated with one of the vendors. I appreciate all useful help and want to thank you in advance for the effort!

  Read the article

• software to allow a friend to look on your screen

  - by acidzombie24

  I want a friend of mine to review my code. I have a mic built into my laptop but i can use another software for voice chat. So i would like to have him to either view my screen (taking control might be fine) or show me his screen so he can talk about a specific piece of code. What software is good for this? We both think about security so an MS product (netmeeting? if that still exist on normal msn live installs) or an open source would be preferred. Should be free.

  Read the article

• netcat as a multithread server

  - by etuardu

  Hello, I use netcat to run a simple server like this: while true; do nc -l -p 2468 -e ./my_exe; done This way, anyone is able to connect to my host on port 2468 and talk with "my_exe". Unfortunately, if someone else wants to connect during an open session, it would get a "Connection refused" error, because netcat is no longer in listening until the next "while" loop. Is there a way to make netcat behave like a multithread server, i.e. always in listening for incoming connections? If not, are there some workarounds for this? Thank you all!

  Read the article

• Network monitoring solution

  - by Hellfrost

  Hello Serverfault ! I have a big distributed system I need to monitor. Background: My system is comprised of two servers, concentrating and controlling the system. Each server is connected to a set of devices (some custom kind of RF controllers, doesnt matter to my question), each device connects to a network switch, and eventually all devices talk to the servers, the protocol between the servers and the devices is UDP, usually the packets are very small, but there are really a LOT of packets. the network is also somewhat complex, and is deployed on a large area physically. i'll have 150-300 of these devices, each generating up to 100+ packets per second, and several network switches, perhaps on 2 different subnets. Question I'm looking for some solution that will allow me to monitor all this mess, how many packets are sent, where, how do they move through the network, bandwidth utilization, throughput, stuff like that. what would you recommend to achieve this? BTW Playing nice with windows is a requirement.

  Read the article

• Apache configuration to accept all data

  - by ServerDown

  Hi, I have apache running on port 7979 to talk with a device that sends data to webserver and later will run php scripts to process and send reply xml. The problem now is that it sends data like POST HTTP/1.1 Content-Type:text/xml Content-Length:369 Followed by XML When apache sees this it gives a 400 error. Since the device cannot be changed is there any way to accept the full data sent from the device and write to some log? Currently apache simply keeps sending 400 errors back. If there was a way to log the entire xml or create some custom handler for 400 error then the xml could be read by a php script. Looking forward to solutions.

  Read the article

• Can't connect Alienware M11x wireless to internet thru families router

  - by Jim Kron

  Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

  Read the article

• RODC password replication and A/D sites and subnets

  - by Gregory Thomson

  I work at a school district with about 30 school sites. Windows 2008 A/D setup - all central at the district office. In A/D, all is under one site, and no subnets defined. One A/D forest and only one domain under that. We're now looking to start putting RODCs at the schools to put the authentication and DNS out there closer to them. I haven't worked with A/D sites and subnets, and only a little with RODC password replication. But just got an invite to a meeting to talk about this tomorrow... If we start breaking down the A/D pieces into sites/subnets, can we also use that as a way to help apply an RODC password replication policy in a way that matches so that only each school sites' users passwords are replicated/cached on their RODC?

  Read the article

• Host not visible in ECC after pushing master agent on server

  - by wildchild

  Hi all!! ECC master Agent has been pushed to one of the servers.. Once a Master Agent installed the host should appear within ECC.However, I am unable to see the host. I asked the Server team to stop and start the master agent ,and to check whether required port is enabled, so that server can talk with ECC server. After restarting the service I get an error.I even checked if the port is used by any other service ,it is not.. Somebody plz help what should done here..it’s a Windows server. Here's the error:- "The EMC control Center Master agent service on local computer atrted and the stopped.Some services stopped automatically if they 've no work to do,for example prformance logs and alert services" Thanks in advance!!

  Read the article

• Sharepoint site settings add on ssl port number?

  - by Mike

  WSS 3.0 IIS6/WinSever2003 CAG We have several WSS sites on a SharePoint WSS box that talk to the outside, all of which are SSL enabled. So you get a CAG(Citrix Access Gateway) to translate the 443 port to the local ssl port on the server. Everything is set up and works fine until you get into the Site Settings and start rooting around, it seems like a very unstable link library. Links will try to use the local ssl port number instead of the 443 standard; it will try to skip the step. Is that the site? Any ideas on how to fix it?

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• How can I dual install Ubuntu 10.4 in a Mac Mini with 10.4.11?

  - by Marco Mariani

  I'd like to power-up my aging Mac Mini (1.5GHz Core Solo, 1GB RAM, Tiger 10.4.11) by installing a shiny Ubuntu alongside the current OS. After all, I use Ubuntu for everything save for cleaning my teeth. Since it's my first and only Mac and I have next to no experience with the OS (having used it basically as a media player) I am a little concerned about rEFIt, ELILO, Boot Camp and the fact that it's basically a 4.5 years old unsupported machine and I might get asleep reinstalling everything several times. I've used the live desktop-i386 CD and everything works. I tried with an external USB drive instead of a CD but couldn't make it boot. As for installing Ubuntu, the howtos I've found give several alternatives depending on the model, the OSX version, etc.. but they usually talk about newer machines. Which howto should I follow to repartition, and boot thereafter? Thanks

  Read the article

• Distribute terrabyte files to the public from web server

  - by MarkJ

  Hi We need to set up a website which makes two or three large files publicly available - the files will be 1 or 2 terrabytes each. Although they will be public, in practise I expect only a relatively small number of scientists will want to download them. What is the best way to allow this? I've had a quick talk to a web-hosting provider (rackspace) and they suggested a hybrid solution. An entry-level managed server (we predict fairly low traffic for the website, but we do need to install some custom CGI software). Some cloud storage which hooks into Limelight Networks. This would host the large files, for download by FTP. It sounded OK to me but I know relatively little about server administration. Does it make sense? Thanks in advance, Mark

  Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >