Search Results

Search found 10515 results on 421 pages for 'automatically'.

Page 86/421 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Does Windows 7 Authenticate Cached Credentials on Startup

  - by Farray

  Problem I have a Windows domain user account that gets automatically locked-out semi-regularly. Troubleshooting Thus Far The only rule on the domain that should automatically lock an account is too many failed login attempts. I do not think anyone nefarious is trying to access my account. The problem started occurring after changing my password so I think it's a stored credential problem. Further to that, in the Event Viewer's System log I found Warnings from Security-Kerberos that says: The password stored in Credential Manager is invalid. This might be caused by the user changing the password from this computer or a different computer. To resolve this error, open Credential Manager in Control Panel, and reenter the password for the credential mydomain\myuser. I checked the Credential Manager and all it has are a few TERMSRV/servername credentials stored by Remote Desktop. I know which stored credential was incorrect, but it was stored for Remote Desktop access to a specific machine and was not being used (at least not by me) at the time of the warnings. The Security-Kerberos warning appears when the system was starting up (after a Windows Update reboot) and also appeared earlier this morning when nobody was logged into the machine. Clarification after SnOrfus answer: There was 1 set of invalid credentials that was stored for a terminal server. The rest of the credentials are known to be valid (used often & recently without issues). I logged on to the domain this morning without issue. I then ran windows update which rebooted the computer. After the restart, I couldn't log in (due to account being locked out). After unlocking & logging on to the domain, I checked Event Viewer which showed a problem with credentials after restarting. Since the only stored credentials (according to Credential Manager) are for terminal servers, why would there be a Credential problem on restart when remote desktop was not being used? Question Does anyone know if Windows 7 "randomly" checks the authentication of cached credentials?

  Read the article

• SSD cache to minimize HDD spin-up time?

  - by sirprize

  short version first: I'm looking for Linux compatible software which is able to transparently cache HDD writes using an SSD. However, I only want to spin up the HDD once or twice a day (to write the cached data to the HDD). The rest of the time, the HDD should not be spinning due to noise concerns. Now the longer version: I have built a completely silent computer running Xubuntu. It has a A10-6700T APU, huge fanless cooler, fanless PSU, SSD. The problem is: it also has (and needs) a noisy HDD and I want to forbid spinning it up during the night. All writes should be cached on the SSD, reads are not needed in the night. Throughout every day, this computer will automatically download about 5 GB of data which will be retained for about a year, giving a total needed disk capacity of slightly less than 2 TB. This data is currently stored on a 3 TB noisy hard disk drive which is spinning day and night. Sometimes, I'll need to access some data from several months ago. However, most times I'll only need data from the last 14 days, which would fit on the SSD. Ideally, I'd like a transparent solution (all data on one filesystem) which caches all writes to the SSD, writing to the HDD only once a day. Reads would be served by the cache if they were still on the SDD, else the HDD would have to spin up. I have tried bcache without much success (using cache_mode=writeback, writeback_running=0, writeback_delay=86400, sequential_cutoff=0, congested_write_threshold_us=0 - anything missing?) and I read about ZFS ZIL/L2ARC but I'm not sure I can achieve my goal with ZFS. Any pointers? If all else fails, I will simply use some scripts to automatically copy files over to the big drive while deleting the oldest files from the SSD.

  Read the article

• Outlook 2007/2010 autodiscovering old Exchange info

  - by Dan

  I currently have an Exchange setup as follows: two Exchange 2003 servers clustered together set up as the current mailbox stores, one Exchange 2003 setup as a frontend, one Exchange 2007 set up as a frontend (was set up for testing by my predecessor, never really used intentionally), and now four Exchange 2010 servers - two mailboxes in a DAG and two with Hub/CAS. Everything seems to be working fine with one exception - Outlook 2007/2010 clients are still autodiscovering the test 2007 frontend and not the 2010 CAS array. I know this because there's an expired cert on the 2007 box so the client displays a cert error when you attempt to autocreate the outlook profile. From what I've read, there is an SCP (Service Connection Point) in AD that is pointing to the old server and it is getting returned first, causing Outlook to try it first. How can I prevent Outlook from even attempting to connect to this 2007 box from now on? http://www.msexchange.org/articles_tutorials/exchange-server-2010/management-administration/exchange-autodiscover.html When Outlook 2007 is installed on a domain joined workstation then the Outlook client will query Active Directory for the Autodiscover information. Active Directory will return a list of SCP’s and the Outlook client will automatically select the first SCP in this list. Using the information found in the SCP the Outlook client will contact the Client Access Server for its configuration information and the Outlook client will be configured automatically.

  Read the article

• Tomcat uninstall problems

  - by Deepak

  Hi, I am using "apt-get remove tomcat6" to remove tomcat.It gives this outout and tomcat still running on my system: Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: seamonkey-gnome-support ocaml-base-nox libghc6-hsql-prof libgmp3-dev libffi-dev libtool libghc6-hsql-dev libgmpxx4ldbl ghc6-prof camlp4 ghc6 ledit ocaml-interp rhino libltdl-dev ocaml-nox Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: tomcat6 tomcat6-admin tomcat6-examples 0 upgraded, 0 newly installed, 3 to remove and 1 not upgraded. After this operation, 2,400kB disk space will be freed. Do you want to continue [Y/n]? y Segmentation fault deepak@kalpna-desktop:~$ apt-get remove tomcat6 Reading package lists... Done Building dependency tree Reading state information... Done The following packages were automatically installed and are no longer required: seamonkey-gnome-support ocaml-base-nox libghc6-hsql-prof libgmp3-dev libffi-dev libtool libghc6-hsql-dev libgmpxx4ldbl ghc6-prof camlp4 ghc6 ledit ocaml-interp rhino libltdl-dev ocaml-nox Use 'apt-get autoremove' to remove them. The following packages will be REMOVED: tomcat6 tomcat6-admin tomcat6-examples 0 upgraded, 0 newly installed, 3 to remove and 1 not upgraded. After this operation, 2,400kB disk space will be freed. Do you want to continue [Y/n]? y Segmentation fault What is the way to re-install tomcat on ubuntu. Regards D

  Read the article

• Uninstall Perl 5.10 and Install 5.8 on Ubuntu 10.04

  - by user48848

  I was using Ubuntu 8.04 with installed Perl 5.8.8. I had installed Bugzilla 3.4.4 with some custom scripts and it was working fine. I had to upgrade Ubuntu from 8.04 to 10.04 and automatically Perl is also upgraded from Perl 5.8 to 5.10. Now, accessing Bugzilla displays an error message related to Perl module. While trying to run checksetup.pl, I am getting the following error message: root@cvsnew:/var/www/bugzilla-3.4# perl checksetup.pl * This is Bugzilla 3.4.3 on perl 5.10.1 * Running on Linux 2.6.32-24-generic-pae #39-Ubuntu SMP Wed Jul 28 07:39:26 UTC 2010 Checking perl modules... Checking for CGI.pm (v3.33) ok: found v3.48 perl: symbol lookup error: lib/i486-linux-gnu-thread-multi/auto/Digest/SHA/SHA.so: undefined symbol: Perl_Tstack_sp_ptr Accessing Bugzilla throws : "500 Internal Server Error". I explored this issue and found that this issue has come up because upgrading Ubuntu upgrades Perl 5.8 to 5.10 automatically. It seems like Perl 5.10.1 isn't binary compatible with the previous. Now, I want to uninstall Perl 5.10.1 and Install Perl 5.8.8 on my Ubuntu 10.04 box. I will appreciate if someone has already done that or share the required steps/commands to do it.

  Read the article

• Is it possible to stop the "Beep" device on all computers in a Windows network?

  - by sharptooth

  On Windows the default behavior it to make an annoying "beep" sound every time Windows things something notable happened. The result is that when someone send a company-wide email via the MS Exchange all computers around my cubicle beep one by one. This is annoying and makes no sense. Luckily beeping can be shut off. Someone has to: open the "Device Manager", select "View - Show hidden devices", find the "Beep" device in "Non-Pug and Play Devices" node, open its properties, go to the "Driver" tab, set "startup type" to "Disabled" and click "Stop". The "Beep" device will stop and no longer produce the useless sound. This solution however requires tracking every computer and then talking to its user which is not very convenient. Device Manager doesn't allow stopping a device on another computer. I'm looking for a solution that can be deployed by the administrators team. We have a domain and the administrators even install the programs company-wide automatically. Are there any means to stop the "Beep" device an all computers in the Windows network with some remote-administration features automatically?

  Read the article

• I need scanning software to use with my scanner.

  - by D Connors

  So, I got this (HP F4280) printer/scanner about a year ago, and I'm really happy with it. The only thing is that I never really liked the HP scanning software that came with it. A few months ago I reformatted and reinstalled windows 7. Then, once I plugged in the printer, I noticed that windows recognized it automatically, and offered to install all the drivers by itself. So instead of manually installing the driver that came in the CD, I simply let windows automatically install it from its servers, and so far it's great. Instead of HP's scanning software (that really wasn't pleasing me), I got a very simplified interface that is more than enough for my ocasional scanning habits. Until today. Today I had to scan a bunch of old pictures for my father. And that simple interface felt like it was lacking quite a few features to make this repetitive task a little easier. And that's why I'm now looking for a good software to use for scanning. By "good" I mean anything well thought out, and specially anything that will make my life easier when repetitive-scanning. It doesn't need to have professional tweaking options, but having them is not a problem either. You guys got anything?

  Read the article

• Incorrect deployment of WSGI app to AWS using Elastic Beanstalk

  - by Dzmitry Zhaleznichenka

  cross-link to AWS forums I have developed a simple Python web service using WSGI and would like to deploy it to AWS cloud using Elastic Beanstalk. My problem is I cannot make all the options I specify in Elastic Beanstalk configuration to be correctly configured in the cloud. For deployment, I use Elastic Beanstalk CLI utility. I have run eb init command and set up the required parameters. After this, a directory named .elasticbeanstalk was created in my source tree. It has two config files that are used for deployment, namely config and optionsettings. The latter one among the other options contains the WSGI configuration that has to update /etc/httpd/conf.d/wsgi.conf at the instances. After some of my adjustments the file has the following settings: [aws:elasticbeanstalk:application:environment] DJANGO_SETTINGS_MODULE = PARAM1 = PARAM2 = PARAM4 = PARAM3 = PARAM5 = [aws:elasticbeanstalk:container:python] WSGIPath = handler.py NumProcesses = 2 StaticFiles = /static= NumThreads = 10 [aws:elasticbeanstalk:container:python:staticfiles] /static = static/ [aws:elasticbeanstalk:hostmanager] LogPublicationControl = false [aws:autoscaling:launchconfiguration] InstanceType = t1.micro EC2KeyName = zmicier-aws [aws:elasticbeanstalk:application] Application Healthcheck URL = [aws:autoscaling:asg] MaxSize = 10 MinSize = 1 Custom Availability Zones = [aws:elasticbeanstalk:monitoring] Automatically Terminate Unhealthy Instances = true [aws:elasticbeanstalk:sns:topics] Notification Endpoint = Notification Protocol = email It turns out that not all of these options are considered when I start the environment or update it. Thus, when I update NumThreads or NumProcesses, the respective parameters get changed in wsgi.conf as expected. But whatever I write to the WSGIPath and StaticFiles parameters, I'm not able to automatically change the respective values of wsgi.conf, they remain Alias /static /opt/python/current/app/ WSGIScriptAlias / /opt/python/current/app/application.py which drives me nuts. Moreover, when I deploy my application using git aws.push and having the following contents of .ebextensions/python.config file, neither of options I specify in it affects the deployment. option_settings: - namespace: aws:elasticbeanstalk:container:python option_name: WSGIPath value: mysite/wsgi.py - namespace: aws:elasticbeanstalk:container:python option_name: NumProcesses value: 5 - namespace: aws:elasticbeanstalk:container:python option_name: NumThreads value: 25 - namespace: aws:elasticbeanstalk:container:python:staticfiles option_name: /static/ value: app/static/ I wonder what I should do to force AWS use all the parameters I specify in the configuration, namely the WSGI Path and path to my static data.

  Read the article

• .NET Framework 1.1 on IIS 7

  - by Zack Peterson

  I have inherited a .NET Framework 1.1 web site that I must host with IIS 7 on Windows Server 2008. I'm having some trouble. 1. Installation I installed .NET Framework 1.1 following these instructions. The installation automatically created a new Application Pool "ASP.NET 1.1". I use that. 2. Trouble When I launch the web site I see web.config runtime errors: The tag contains an invalid value for the 'culture' attribute. I fix that one and then see: Child nodes are not allowed. I don't want to keep playing this whack-a-mole game. Something must be wrong. 3. Am I sure this is .NET 1.1? I examine the automatically created application pool. I see that it's 1.1. Advanced Settings... Basic Settings... This doesn't seem right. While 1.1 is set, it's not an option in the Advanced drop down selectors. And why in the Basic box is it just "v1.1" and not ".NET Framework v1.1.4322"? That would be more consistent. 4. I cannot create other .NET 1.1 App Pools I cannot select .NET Framework 1.1 for other application pools. It's not an option in the drop down selectors. What's up with that? What now? Why isn't v1.1 an option for all AppPools? How can I verify my application is in fact using .NET Framework 1.1? Why might I get these runtime errors?

  Read the article

• Windows Explorer slow to open networked computer, fast to navigate once opened

  - by Scott Noyes

  I open Windows Explorer and enter an IP for a computer on my home network (\\192.168.1.101). It takes 30 seconds or more to present a list of the shared folders. It does not appear to be an initial handshaking/authentication thing; even if I allow the view to load and then immediately load the same again, it is always slow. Once they appear, navigating through folders and opening files is fast. Also, navigating directly to a folder (\\192.168.1.101\My Music) is fast, even if it's the first connection since a restart. Using \\computerName instead of the IP address gives exactly the same results. Pings return in 1ms. net view \\computerName (or \ipAddress) returns the list of shared folders fast. This makes me suspect an Explorer issue rather than a network issue. Suspecting that the remote computer was being automatically indexed or something, I went into Tools-Folder Options-View and unchecked "Automatically search for network folders and printers," but that made no difference. De-selecting the "Folders" icon near the address bar makes no difference. Adding the IP address and computer name to the hosts file makes no difference. Both computers involved are laptops running Windows XP. Both have WiFi and cable adapters. Mine is not connected via cable. The result is the same whether the target is plugged in to the cable or not (although the IP address changes - 192.168.1.101 over cable, 192.168.1.103 over WiFi.) We are using DHCP assigned by the router.

  Read the article

• Shared files folder in Amazon Elastic Beanstalk environment

  - by por

  I'm working on a Drupal application, which is planned to be hosted in Amazon Elastic Beanstalk environment. Basically, Elastic Beanstalk enables the application to scale automatically by starting additional web server instances based on predefined rules. The shared database is running on an Amazon RDS instance, which all instances can access properly. The problem is the shared files folder (sites/default/files). We're using git as SCM, and with it we're able to deploy new versions by executing $ git aws.push. In the background Elastic Beanstalk automatically deletes ($ rm -rf) the current codebase from all servers running in the environment, and deploys the new version. The plan was to use S3 (s3fs) for shared files in the staging environment, and NFS in the production environment. We've managed to set up the environment to the extent where the shared files folder is mounted after a reboot properly. But... The Problem is that, in this setup, the deployment of new versions on running instances fail because $ rm -rf can't remove the mounted directory, and as result, the entire environment goes down and we need restart the environment, which isn't really an elegant solution. Question #1 is that what would be the proper way to manage shared files in this kind of deployment? Are you running such an environment? How did you solve the problem? By looking at Elastic Beanstalk Hostmanager code (Ruby) there seems be a way to hook our functionality (unmount if mounted in pre-deploy and mount in post-deploy) into Hostmanager (/opt/hostmanager/srv/lib/elasticbeanstalk/hostmanager/applications/phpapplication.rb) but the scripts defined in the file (i.e. /tmp/php_post_deploy_app.sh) don't seem to be working. That might be because our Ruby skills are non-existent. Question #2 is that did you manage to hook your functionality in Hostmanager in a portable way (i.e. by not changing the core Hostmanager files)?

  Read the article

• AMD switchable graphics are not working OR I don't know how to make them work

  - by Deus Deceit

  I don't know if this is the right place for this question, but I'll give it a shot. I have a Dell Inspiron 17R 5721. It's supposed to be using switchable graphics. It has an Intel HD 4000 and a Radeon HD 8730M and I'm using windows 8. My problem is this, I Installed the drivers that dell gives me but I don't see the AMD graphics card ANYWHERE ( I do see it in device manager but not anywhere else to select and play a game using AMD). I installed the latest drivers from AMD and same thing, I can't run a game with AMD graphics card. I change the applications preferences in the Catalyst control center but even after that, games don't give me the option to select the AMD card, they list only the Intel HD 4000. Can someone tell me what I have to do to make this work? ------------------- After looking around and messing with stuff. I think.... I THINK that you don't really get the option to select a graphics card. Switchable graphics is all about switching automatically depending on application's needs. Cause when I uninstalled AMD's drivers or actually (screwed up lol) games were playing much worse. When I re-installed them, games went back to being good looking. So even if a game sees only the Intel HD 4000 graphics card windows or AMD's drivers will switch to the AMD Readeon graphics card automatically. I hope someone can verify this. Cause seriously I don't think you get to play scyrim with High graphics settings or even ultra with the Intel HD Graphics card. -------------------

  Read the article

• pppd disconnects from 3G, doesn't reconnect, w/ persist set

  - by bytenik

  I am trying to configure pppd to connect to a 3G network (Sprint, in this case) and then stay connected, reconnecting automatically if the remote connection is terminated. I have enabled the persist option. My configuration file is as follows: hide-password noauth connect "/usr/sbin/chat -v -f /etc/chatscripts/cellular" debug /dev/cell 921600 defaultroute noipdefault user " " persist maxfail 0 lcp-echo-failure 10 lcp-echo-interval 60 holdoff 5 However, when the peer disconnects the connection, pppd often waits a long time (substantially more than my holdoff) to reconnect the modem -- if it ever reconnects at all! An example log showing this: May 23 05:17:24 00270e0a8888 pppd[2408]: rcvd [LCP TermReq id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: LCP terminated by peer May 23 05:17:24 00270e0a8888 pppd[2408]: Connect time 60.1 minutes. May 23 05:17:24 00270e0a8888 pppd[2408]: Sent 0 bytes, received 0 bytes. May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down started (pid 2456) May 23 05:17:24 00270e0a8888 pppd[2408]: sent [LCP TermAck id=0x26] May 23 05:17:24 00270e0a8888 pppd[2408]: Script /etc/ppp/ip-down finished (pid 2456), status = 0x0 May 23 05:17:24 00270e0a8888 pppd[2408]: Hangup (SIGHUP) May 23 05:17:24 00270e0a8888 pppd[2408]: Modem hangup May 23 05:17:24 00270e0a8888 pppd[2408]: Connection terminated. May 23 05:17:24 00270e0a8888 pppd[2408]: Terminating on signal 15 May 23 05:17:24 00270e0a8888 pppd[2408]: Exit. May 23 06:08:07 00270e0a8888 pppd[2500]: pppd 2.4.5 started by root, uid 0 May 23 06:08:10 00270e0a8888 pppd[2500]: Script /usr/sbin/chat -v -f /etc/chatscripts/cellular finished (pid 2530), status = 0x0 May 23 06:08:10 00270e0a8888 pppd[2500]: Serial connection established. May 23 06:08:10 00270e0a8888 pppd[2500]: using channel 11 The disconnect at the request of the peer occurs at 5:17, but the reconnect didn't happen until 6:08. I had a friend monitoring the server so I'm not certain that this wasn't a manual reconnection. Either way, it either took almost an hour to reconnect or never reconnected. Shouldn't persist + holdoff 5 cause this to automatically reconnect after 5 seconds of the link terminating?

  Read the article

• How to get automatic upgrades to work on Ubuntu Server?

  - by J. Pablo Fernández

  I followed the documentation for enabling automatic upgrades in Ubuntu servers, but it's not really updating anything at all. My /etc/apt/apt.conf.d/50unattended-upgrades looks almost like the default. // Automatically upgrade packages from these (origin, archive) pairs Unattended-Upgrade::Allowed-Origins { "Ubuntu karmic-security"; "Ubuntu karmic-updates"; }; // List of packages to not update Unattended-Upgrade::Package-Blacklist { // "vim"; // "libc6"; // "libc6-dev"; // "libc6-i686"; }; // Send email to this address for problems or packages upgrades // If empty or unset then no email is sent, make sure that you // have a working mail setup on your system. The package 'mailx' // must be installed or anything that provides /usr/bin/mail. Unattended-Upgrade::Mail "[email protected]"; // Automatically reboot *WITHOUT CONFIRMATION* if a // the file /var/run/reboot-required is found after the upgrade //Unattended-Upgrade::Automatic-Reboot "false"; The directory /var/log/unattended-upgrades/ is empty. Running /etc/init.d/unattended-upgrades start is not very nice: root@mozart:~# /etc/init.d/unattended-upgrades start Checking for running unattended-upgrades: root@mozart:~# Something seems to be broken, but I'm not sure why. I have pending updates and they are not being applied: root@mozart:~# aptitude safe-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following packages will be upgraded: linux-libc-dev 1 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/743kB of archives. After unpacking 4096B will be used. Do you want to continue? [Y/n/?] In all the servers I have, unattended upgrades seems to have been disabled: root@mozart:~# apt-config shell UnattendedUpgradeInterval APT::Periodic::Unattended-Upgrade root@mozart:~# Any ideas what am I missing?

  Read the article

• MySQL unstable behavior with external stroge

  - by onurozcelik

  In our project we are using MySQL 5.0.90(InnoDB engine) server with an external storage. We store MySQL data files in an external storage. When the external storage down for a reason we have unstable behaviours. So we made some tests. In Windows Server 2008 We closed external storage physically. MySQL service stoped and we could not reach the server. Then we opened the storage unit and we could not start service until we reconfigured MySQL. We made storage unit offline from operating system. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online and we could start the service(not automatically). In Windows Server 2003 We made storage unit offline. After 3-4 minutes and some insert trials(some insert trials succeded) MySQL service stoped and we could not reach the server. Then we made storage unit online we could not start the service until we reinstalled MySQL. Before reinstall we tried to reconfigure but it did not work. We closed external storage physically. MySQL service stoped and we could not reach the server. After that we opened the storage unit and we could start service(not automatically) We expect service to autostart after storage unit is online/open. But these tests show unstable behaviors. Is there any solutions to this.

  Read the article

• How can I configure Cyrus IMAP to submit a default realm to SASL?

  - by piwi

  I have configured Postfix to work with SASL using plain text, where the former automatically submits a default realm to the latter when requesting authentication. Assuming the domain name is example.com and the user is foo, here is how I configured it on my Debian system so far. In the postfix configuration file /etc/main.cf: smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain The SMTP configuration file /etc/postfix/smtpd.conf contains: pwcheck_method: saslauthd mech_list: PLAIN The SASL daemon is configured with the sasldb mechanism in /etc/default/saslauthd: MECHANIMS="sasldb" The SASL database file contains a single user, shown by sasldblistusers2: [email protected]: userPassword The authentication works well without having to provide a realm, as postifx does that for me. However, I cannot find out how to tell the Cyrus IMAP daemon to do the same. I created a user cyrus in my SASL database, which uses the realm of the host domain name, not example.com, for administrative purpose. I used this account to create a mailbox through cyradm for the user foo: cm user.foo IMAP is configured in /etc/imapd.conf this way: allowplaintext: yes sasl_minimum_layer: 0 sasl_pwcheck_method: saslauthd sasl_mech_list: PLAIN servername: mail.example.com If I enable cross-realm authentication (loginrealms: example.com), trying to authenticate using imtest works with these options: imtest -m login -a [email protected] localhost However, I would like to be able to authenticate without having to specify the realm, like this: imtest -m login -a foo localhost I thought that using virtdomains (setting it either to userid or on) and defaultdomain: example.com would do just that, but I cannot get to make it work. I always end up with this error: cyrus/imap[11012]: badlogin: localhost [127.0.0.1] plaintext foo SASL(-13): authentication failure: checkpass failed What I understand is that cyrus-imapd never tries to submit the realm when trying to authenticate the user foo. My question: how can I tell cyrus-imapd to send the domain name as the realm automatically? Thanks for your insights!

  Read the article

• Can I make my PC backup and then sleep on demand with WHS?

  - by Simon

  I really hate the way that WHS backs up at a particular time in the morning. First of all I don't EVER want my computer turning on when I am not there. EVER. I have a Core-i7 laptop which literally could burn the house down quite easily if it were to turn on in a bag. I also don't ever want my PC to sleep unless I tell it to. I don't have hibernation or sleep enabled and this is the only way that WHS will sleep after a backup is complete. I know that Windows 7 has the ability to disable waking up when on battery power but it doesn't seem to work on my laptop. These are the possibilities (with wake timers left as default): 'Wake this computer for backup' ON - it turns on in my bag if i forget to turn it off - and stays on when the backup is complete. 'Wake this computer for backup' OFF - it backs up in the morning, but I need to leave the machine on all night. I say 'Backup Now' and then it backs up immediately. I can turn it off when its done if I'm still awake, but then that backup appears as 'locked' in the console and not 'automatically managed'. What I'd really like to do is : Click 'Backup and Sleep' and then go to bed. It will backup immediately and then sleep the PC. This backup must be 'automatically managed' and not appear as a 'locked backup' in my console Show me a confirmation that everything was backed up successfully (or not) when I turn it on. Is there any way to achieve this?

  Read the article

• IP Blacklists and suspicious inbound and outbound traffic

  - by Pantelis Sopasakis

  I administer a web server and recently we had our IP banned (!) from our host after they received a notification e-mail for abuse. In particular our server is allegedly involved in spam attacks over HTTP. The content of the abuse report email we received was not much informative - for example the IP addresses our server is supposed to have attacked against are not included - so I started a wireshark session checking for suspicious traffic over TCP/HTTP while trying to locate possible security holes on the system. (Let me note that the machine runs a Debian OS). Here is an example of such a request... Source: 89.74.188.233 Destination: 12.34.56.78 // my ip Protocol: HTTP Info: GET 'http://www.media.apniworld.com/image.php?type=hv' HTTP/1.0 I manually blacklisted this host (as well as some other ones) blocking them with iptables, but I can't keep on doing manually all day long... I'm looking for an automated way to block such IPs based on: Statistical analysis, pattern recognition or other AI-based analysis (Though, I'm reluctant to trust such a solution, if exists) Public blacklists Using DNSBL I actually found out that 89.74.188.233 is blacklisted. However other IPs which are strongly suspicious like 93.199.112.126 (i.e. http://www.pornstarnetwork.com/account/signin), unfortunately were not blacklisted! What I would like to do is to automatically connect my firewall with DNSBL (or some other blacklist database) and block all traffic towards blacklisted IPs or somehow have my local blacklist automatically updated.

  Read the article

• Seagate 3TB ST3000DM001 hard drive not recognized by Linux, causes fdisk to hang

  - by MountainX

  I'm running Kubuntu 12.04. I have a brand new, never used Seagate 3TB ST3000DM001 hard drive. It's an internal drive. I installed it in a USB enclosure. When I connect it to my PC, nothing happens automatically. When I run sudo fdisk -l, fdisk hangs (without reporting this drive) until I disconnect this drive from the USB port. blkid won't report it either. I tried connecting it to both USB 2.0 and USB 3.0 ports on my PC. I got the same result either way. I tried two different USB enclosures with the same result. If I take the same drive, same enclosure and connect it to a Windows 7 laptop, it is recognized automatically as a USB mass storage device. I want to format the drive (probably ext4) and copy files to it. I have another drive, also in a USB enclosure, that is connected via USB 3.0 to this PC and it works fine. It's a 2.0 TB Samsung HDD. I plan to copy files from the 2TB to the 3TB drive, once I get this issue resolved. My motherboard is an Asus Asus P8B WS LGA1155/ Intel C206/ Quad CrossFireX/ SATA3&USB3.0/ A&2GbE/ ATX. What is the resolution?

  Read the article

• Missing BootMgr in Vista

  - by Selase

  Am in really deep trouble here and would use every advice available from everyone out there.. Am message just pooped on my screen and i had to restart my laptop. upon restarting the BootMgr got corrupted. Am running Windows Vista 32 bit by the way.. i got onto Google with a friend's PC and found two basic ways of fixing it. the first one that requires windows to automatically fix it using Startup repair ends up with the error message : "Startup REpair cannot repair this computer automatically" the second option that requires me to rebuild the BCD scans my system and finds the operating system on drive D:\Windows which i believe should be C:. if i hit Y(yes) for the rebuild process to take place i get the message "The required system device cannot be found" i then try the second option which requires me to recreate the BCD Store ends up with an error message that says "The store export operation has failed. The requested system device cannot be found". proceeding from there is meaningless since the system device cannot be found. I somehow believe the device cannot be found because its identifying the windows installation on D: instead of C: but how to change that i have no idea... I dot know how it happens to identify an O/S on D: when there's none there... How do i go about fixing the BootMgr? I have very important files on my system and cant afford to reinstall windows... i really need to fix this..Please help...

  Read the article

• DNS failover in a two datacenter scenario

  - by wanson

  I'm trying to implement a low-cost solution for website high availability. I'm looking for the downsides of the following scenario: I have two servers with the same configuration, content, mysql replication (dual-master). They are in different datacenters - let's call them serverA and serverB. Users use serverA - serverB is more like a backup. Now, I want to use DNS failover, to switch users from serverA to serverB when serverA goes down. My idea is that I setup DNS servers (bind/powerdns) on serverA and serverB - let's call them ns1.website.com and ns2.website.com (assuming I own website.com). Then I configure my domain to use them as its nameservers. Both DNS servers will return serverA IP as my website's IP. If serverA goes down I can (either manually or automatically from serverB) change configuration of serverB's DNS, to return IP of serverB as website's IP. Of course the TTL will be low, as it's supposed to be in DNS failovers. I know that it may take some time to switch to serverB (DNS ttl, time to detect serverA failure, serverB DNS reconfiguration etc), and that some small part of users won't use serverB anyway. And I'm OK with that. But what are other downsides of such an approach? An alternative scenario is that ns1.website.com will return serverA IP as website's IP, and ns2.website.com will return serverB IP as website's IP. But AFAIK clients not always use primary nameserver and sometimes would use secondary one. So some small part of users would use serverB instead of serverA which is not quite what I'd like. Can you confirm that DNS clients behave like that and can you tell what percentage of clients would possibly use serverB instead of serverA (statistically)? This one also has the downside that when serverA goes back up, it will be automatically used as website's primary server, which is also a bad situation (cold cache, mysql replication could fail in the meantime etc). So I'm adding it only as a theoretical alternative. I was thinking about using some professional DNS failover companies but they charge for the number of DNS requests and the fees are very high (why?)

  Read the article

• DNS Replication on Server 2008 R2

  - by Aaron

  Hi There, I have been trying out public only facing DNS servers with Server 2008 R2 Web - I've wanted to setup at least 2 in a master/slave replication. Using Microsoft DNS I am able to add in the domains into the primary zone on the master DNS server (ns1) and add the records ok and have them visible publically. On ns2 I can then add in the same domain but as a secondary zone and get them to replicate / zone transfer fine. Is there a way inside of Windows to have the slave(s) automatically synchronise all the changes from the master? For example it's ok if i have manually added the domains onto each of the NS's but if i add a new zone on the master i have to add it on the slave before it replicates. I installed Simple DNS and they have a 'Super Master/Slave' which takes care of exactly this whereby if you add a new domain into the primary zone it is automatically created and kept in sync on NS2 but i would have to buy a licence. All this is non active directory if that helps. Can anyone advise if it is possible to do this using Microsoft DNS? Many Thanks in Advance!

  Read the article

• How to get an inactive RAID device working again?

  - by Jonik

  After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make active the device again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question.

  Read the article

• Thunderbird does not delete messages from the POP server

  - by Max888

  Thunderbird does not delete messages from the POP server. I am a Yahoo Plus user and I can download messages from the inbox in Thunderbird from the Yahoo POP3 server. However, I want to delete read messages directly on the email client rather than go to Yahoo mail. When I do this, emails are still on the server In accounts setting, I have the following options ticked: -Automatically download new messages -Leave messages on server, Until I delete them Thanks for any guidance Update: Thanks for the replies so far. Some clarification: I do want to keep some messages on Yahoo for filling them in my online folders, hence the reason I do not download ALL my messages to Tbird and delete server message automatically **Update 2: Cracked it!! OK, boys and girls, here is the way to do it. Go to Options- Advanced - Config Editor find the Name 'mail . pop3 . deleteFromServerOnMove' Set it to True True: Delete the copy of the message on the POP3 server if you move or delete the message. False(default): Only delete the copy of the message on the POP3 server if you delete the message. That's it, restart Thunderbird. You need to press 'Get Mail' everytime you want to sync with the email server, in order for you to make sure messages in the application is in sync with the email server.**

  Read the article

• Windows 7 doesn't start anymore

  - by martani_net

  Hi, I've experienced some BSOD on windows 7 RC, and some freezing when startup, but today was big surprise, it doesn't start anymore. I tried to start on safe mode and no results too, it shows the starting animation, then a blue screen for less than a second and turns off immediately. The only thing I remember did today is update flash player under Firefox, then chrome stopped working even after logging off, and once restarting, it doesn't start anymore. Anyone experienced the same issue? any hints? [EDIT 3] Solved : Windows 7 have a very smart repair strategy, it works automatically, and it tried every possible fix, what fixed my problem was the system restore to a previous date, all this happened automatically. [EDIT2] these are the last lines in the ntbtlog.txt file Did not load driver \SystemRoot\System32\drivers\vga.sys Loaded driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Did not load driver \SystemRoot\System32\Drivers\NDProxy.SYS Loaded driver \SystemRoot\system32\drivers\CHDRT32.sys Loaded driver \SystemRoot\system32\DRIVERS\VSTAZL3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTDPV3.SYS Loaded driver \SystemRoot\system32\DRIVERS\VSTCNXT3.SYS Loaded driver \SystemRoot\system32\drivers\modem.sys Loaded driver \SystemRoot\system32\DRIVERS\usbccgp.sys Loaded driver \SystemRoot\System32\Drivers\usbvideo.sys [edit] this is the BSOD I get : http://twitpic.com/i87cx Thank you.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >