Search Results

Search found 30308 results on 1213 pages for 'dont ask'.

Page 86/1213 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Set up printing with a networked LPR printer?

  - by Ben

  I'm trying to set up printing to a networked LPR printer, but I can't seem to make it work. The connexion information that IT gives is: Print Spooler: printing.domain.edu Printer Name: PrinterName Print port: 515 Bidirectional: Disabled It's an HP LaserJet p4015x, and I'm using the "HP LaserJet p4015x, hpcups 3.10.6 (color, 2-sided printing)" driver, according to CUPS. I have tried installing via the CUPS admin interface as lpd://printing.domain.edu:515/PrinterName, lpd://printing.domain.edu/PrinterName, and http://printing.domain.edu:515/PrinterName, and none of these has worked (i.e. test pages show up as "stopped").

  Read the article

• Kernel, dpkg, sudo and apt-get corrupted

  - by TECH4JESUS

  Here are some errors that I am getting: 1) A proper configuration for Firestarter was not found. If you are running Firestarter from the directory you built it in, run make install-data-local to install a configuration, or simply make install to install the whole program. Firestarter will now close. root@p:/# firestarter ** (firestarter:5890): WARNING **: The connection is closed (firestarter:5890): GnomeUI-WARNING **: While connecting to session manager: None of the authentication protocols specified are supported. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. (firestarter:5890): GConf-WARNING **: Client failed to connect to the D-BUS daemon: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. ^C 2) Also I cannot apt-get install sudo root@p:/# apt-get install sudo Reading package lists... Done Building dependency tree Reading state information... Done sudo is already the newest version. The following packages were automatically installed and are no longer required: gir1.2-rb-3.0 gir1.2-gstreamer-0.10 libntfs10 python-mako libdmapsharing-3.0-2 rhythmbox-data libx264-116 rhythmbox libiso9660-7 librhythmbox-core5 libvpx0 libmatroska4 gir1.2-gst-plugins-base-0.10 rhythmbox-mozilla rhythmbox-plugin-zeitgeist libattica0 libgpac0.4.5 python-markupsafe libmusicbrainz4c2a rhythmbox-plugin-cdrecorder rhythmbox-plugins libaudiofile0 Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 18 not upgraded. 9 not fully installed or removed. Need to get 0 B/76.3 MB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y /bin/sh: 1: /usr/sbin/dpkg-preconfigure: not found (Reading database ... 495741 files and directories currently installed.) Preparing to replace linux-image-3.2.0-24-generic 3.2.0-24.39 (using .../linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Preparing to replace linux-image-3.2.0-25-generic 3.2.0-25.40 (using .../linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb) ... dpkg (subprocess): unable to execute old pre-removal script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.prerm): No such file or directory dpkg: warning: subprocess old pre-removal script returned error exit status 2 dpkg - trying script from the new package instead ... dpkg (subprocess): unable to execute new pre-removal script (/var/lib/dpkg/tmp.ci/prerm): No such file or directory dpkg: error processing /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb (--unpack): subprocess new pre-removal script returned error exit status 2 dpkg (subprocess): unable to execute installed post-installation script (/var/lib/dpkg/info/linux-image-3.2.0-25-generic.postinst): No such file or directory dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 2 Errors were encountered while processing: /var/cache/apt/archives/linux-image-3.2.0-24-generic_3.2.0-24.39_amd64.deb /var/cache/apt/archives/linux-image-3.2.0-25-generic_3.2.0-25.40_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1)

  Read the article

• Why won't fetchmail work all of a sudden?

  - by SirCharlo

  I ran a chmod 777 * on my home folder. (I know, I know. I'll never do it again.) Ever since then, fetchmail seems to be broken. I use it to fetch mail from an Exchange 2003 mailbox through DAVMail and OWA. The problem is that fetchmail complains about an "expunge mismatch" whenever I get a new message. It deletes the message from the Exchange mailbox, yet it never forwards it. There seems to be a problem somwhere along the mail processing, but I haven't been able to pinpoint where. Any help would be appreciated. Here are the relevant config files. ~/fetchmailrc: set no bouncemail defaults: antispam -1 batchlimit 100 poll localhost with protocol imap and port 1143 user domain\\user password Password is root no rewrite mda "/usr/bin/procmail -f %F -d %T"; ~/procmailrc: :0 * ^Subject.*ack | expand | sed -e 's/[ ]*$//g' | sed -e 's/^/ /' > /usr/local/nagios/libexec/mail_acknowledgement ~/.forward: | "/usr/bin/procmail" And here is the output when I run fetchmail -f /root/.fetchmailrc -vv: fetchmail: WARNING: Running as root is discouraged. Old UID list from localhost: <empty> Scratch list of UIDs: <empty> fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll started Trying to connect to 127.0.0.1/1143...connected. fetchmail: IMAP< * OK [CAPABILITY IMAP4REV1 AUTH=LOGIN] IMAP4rev1 DavMail 3.9.7-1870 server ready fetchmail: IMAP> A0001 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4REV1 AUTH=LOGIN fetchmail: IMAP< A0001 OK CAPABILITY completed fetchmail: Protocol identified as IMAP4 rev 1 fetchmail: GSSAPI error gss_inquire_cred: Unspecified GSS failure. Minor code may provide more information fetchmail: GSSAPI error gss_inquire_cred: fetchmail: No suitable GSSAPI credentials found. Skipping GSSAPI authentication. fetchmail: If you want to use GSSAPI, you need credentials first, possibly from kinit. fetchmail: IMAP> A0002 LOGIN "domain\\user" * fetchmail: IMAP< A0002 OK Authenticated fetchmail: selecting or re-polling default folder fetchmail: IMAP> A0003 SELECT "INBOX" fetchmail: IMAP< * 1 EXISTS fetchmail: IMAP< * 1 RECENT fetchmail: IMAP< * OK [UIDVALIDITY 1] fetchmail: IMAP< * OK [UIDNEXT 344] fetchmail: IMAP< * FLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk) fetchmail: IMAP< * OK [PERMANENTFLAGS (\Answered \Deleted \Draft \Flagged \Seen $Forwarded Junk)] fetchmail: IMAP< A0003 OK [READ-WRITE] SELECT completed fetchmail: 1 message waiting after first poll fetchmail: IMAP> A0004 EXPUNGE fetchmail: IMAP< A0004 OK EXPUNGE completed fetchmail: 1 message waiting after expunge fetchmail: IMAP> A0005 SEARCH UNSEEN fetchmail: IMAP< * SEARCH 1 fetchmail: 1 is unseen fetchmail: IMAP< A0005 OK SEARCH completed fetchmail: 1 is first unseen 1 message for domain\user at localhost. fetchmail: IMAP> A0006 FETCH 1 RFC822.SIZE fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.SIZE 1350) fetchmail: IMAP< A0006 OK FETCH completed fetchmail: IMAP> A0007 FETCH 1 RFC822.HEADER fetchmail: IMAP< * 1 FETCH (UID 343 RFC822.HEADER {1350} reading message domain\user@localhost:1 of 1 (1350 header octets) fetchmail: about to deliver with: /usr/bin/procmail -f '[email protected]' -d 'root' # fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< Bonne journ=E9e.. fetchmail: IMAP< fetchmail: IMAP< Company Name fetchmail: IMAP< My Name fetchmail: IMAP< IT fetchmail: IMAP< Tel: (XXX) XXX-XXXX xXXX fetchmail: IMAP< www.domain.com=20 fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< -----Message d'origine----- fetchmail: IMAP< De=A0: User [mailto:[email protected]]=20 fetchmail: IMAP< Envoy=E9=A0: 2 juillet 2012 15:50 fetchmail: IMAP< =C0=A0: Informatique fetchmail: IMAP< Objet=A0: PROBLEM: photo fetchmail: IMAP< fetchmail: IMAP< Notification Type: PROBLEM fetchmail: IMAP< Author:=20 fetchmail: IMAP< Comment:=20 fetchmail: IMAP< fetchmail: IMAP< Host: Photos fetchmail: IMAP< Hostname: photo fetchmail: IMAP< State: DOWN fetchmail: IMAP< Address: XXX.XX.X.XX fetchmail: IMAP< fetchmail: IMAP< Date/Time: Mon Jul 2 15:49:38 EDT 2012 fetchmail: IMAP< fetchmail: IMAP< Info: CRITICAL - XXX.XX.X.XX: rta nan, lost 100% fetchmail: IMAP< fetchmail: IMAP< fetchmail: IMAP< ) fetchmail: IMAP< A0007 OK FETCH completed fetchmail: IMAP> A0008 FETCH 1 BODY.PEEK[TEXT] fetchmail: IMAP< * 1 FETCH (UID 343 BODY[TEXT] {539} (539 body octets) ******************************* fetchmail: IMAP< ) fetchmail: IMAP< A0008 OK FETCH completed flushed fetchmail: IMAP> A0009 STORE 1 +FLAGS (\Seen \Deleted) fetchmail: IMAP< * 1 FETCH (UID 343 FLAGS (\Seen \Deleted)) fetchmail: IMAP< * 1 EXPUNGE fetchmail: IMAP< A0009 OK STORE completed fetchmail: IMAP> A0010 EXPUNGE fetchmail: IMAP< A0010 OK EXPUNGE completed fetchmail: mail expunge mismatch (0 actual != 1 expected) fetchmail: IMAP> A0011 LOGOUT fetchmail: IMAP< * BYE Closing connection fetchmail: IMAP< A0011 OK LOGOUT completed fetchmail: client/server synchronization error while fetching from domain\user@localhost fetchmail: 6.3.19 querying localhost (protocol IMAP) at Tue 03 Jul 2012 09:46:36 AM EDT: poll completed Merged UID list from localhost: <empty> fetchmail: Query status=7 (ERROR) fetchmail: normal termination, status 7

  Read the article

• Issues installing synapse launcher

  - by George Morton

  I am trying to install synapse launcher on my desktop . I am using these two commands: sudo add-apt-repository ppa:synapse-core/ppa sudo apt-get update && sudo apt-get install synapse However I am getting an error with the second command saying E: Some index files failed to download, they have been ignored, or old ones used instead. I presume this has something to do with my connection to the hosting servers. But what I don't understand is the fact that synaptic is working it just seems to be something about that ppa. I don't know what I am doing wrong as the commands are widely suggested around the web, But they don't seem to work for me! I would greatly appreciate some advice on this as it is proving to be very frustrating. Many thanks, George

  Read the article

• Is there an Android remote app compatible with LibreOffice Impress under Ubuntu?

  - by WarriorIng64

  I have an upcoming presentation I want to make in LibreOffice Impress on my Ubuntu 12.10 laptop. I was wondering if I could get ahold of an Android app which would act like a remote control, allowing me to switch between slides from my phone over WiFi without having to stay near the laptop (I've been told I need to move around more during my presentations). A quick look on the Google Play store seemed to turn up a handful of PowerPoint remote apps for Windows or maybe Mac. I also took a look at Can an Android phone control Ubuntu like a remote?, but that seems more for controlling an Ubuntu media center. Is there anything which will work with LibreOffice Impress on Ubuntu? My phone is a Samsung Galaxy Precedent on Straight Talk, running Android 2.2.2 (latest available version from the carrier). It's not rooted, and there's not much memory on it either, so the smaller and simpler the app the better. Also, it has to be free because I currently don't have a means to pay for an app I may/may not like.

  Read the article

• no entry for / in /etc/fstab

  - by valya

  Hello! I can't find an entry for mounting "/" in /etc/fstab (I was hoping to set commit value to something big because my HDD is pretty slow): [.../fest]$ cat /etc/fstab # UNCONFIGURED FSTAB FOR BASE SYSTEM /dev/sda3 /media/megahard ntfs-3g defaults,locale=en_US.UTF-8 0 0 /mnt/2Gb.swap none swap sw 0 0 [.../fest]$ cat /etc/issue Ubuntu 10.10 \n \l Netbook Remix, installed with chroot from Wubi (it's not Wubi, it's just installed from it)

  Read the article

• libimobiledevice wants to remove all my other packages

  - by Dror Cohen

  When running the command sudo apt-get remove libimobiledevice2 I get: The following packages will be REMOVED: ... gdm gdm-guest-session gnome-power-manager gnome-session gnome-session-bin gvfs-backends indicator-power indicator-session kde-plasma-desktop kde-standard libgpod-common libgpod4 libimobiledevice2 nautilus-share ubuntu-desktop upower` Is it really nessecary to remove all of my KDE and Gnome packages? The source of the problem is that the installed oneric package doesn't recognize my ios 5.1 - so I wanted to switch to the latest and greatest (1.0.7 and if that's not good enough I'll go to the dev version 1.1.2). I'm using oneric 64bit.

  Read the article

• Dual boot windows 8 and Ubuntu with Windows 8 Boot manager

  - by Mevin Babu

  I have two partitions on my hard-didk , I have installed ubuntu on my 1st partition and windows 8 later on another partition.Now i can only boot into windows 8 because it doesn't recognize Ubuntu. How would i dual boot my PC without using grub . I would like using Windows 8 boot manager as its pretty neat. I tried using easyBCD but it doesn't work.It causes the boot manager to switch to windows 7 Boot Manager .Is there anyother work around or solution Any help would be appreciated. Note: The windows 8 boot Manager is sky blue color interactive menu with mouse and other options and windows 7 boot manager is the normal black and white one where you can only use your keyboard

  Read the article

• "SASL authentication failed" with mutt and Gmail, why?

  - by hhh

  I am confused by this, I have installed a lot of new pkgs and followed some tutorials after googling but I keep getting this kind of SASL -err. I am not sure whether the mistake is in some Gmail settings or should I check some settings in Ubuntu? I thought this tutorial here would have solved this problem (i am simply trying to set up local mail reading with mutt, using gmail) but I cannot see the instructed things with telnet: "250-STARTTLS 250-AUTH PLAIN LOGIN" so that is why it is not working. $cat .muttrc set imap_user = "[email protected]" set imap_pass = "pass" #set smtp_url = "smtp://[email protected]:465/" set smtp_url = "smtp://[email protected]:587/" set smtp_pass = "pass" set from = "[email protected]" set realname = "name" set folder = "imaps://imap.gmail.com:993" set spoolfile = "+INBOX" set postponed="+[Gmail]/Drafts" set move = no

  Read the article

• Another sound not working post

  - by Thomas Smart

  Tried all the other "sound not working" posts i think, lost count. purge/reinstall alsa and pulse, reboot, add user to audio group, various lines in the alsa config file such as "options snd-hda-intel model=" then tried different options like generic, auto, basic, default, etc. tried pulseaudio -k && sudo alsa force-reload a few times, with and without rebooting. Hardware: 16gb ram, core I7-4790, Intel Haswell mboard with onboard sound and graphics Multimedia: Audio Adapter: HDA-Intel-HDA Intel HDMI OS: Ubuntu server 14.04 with ubuntu-desktop installed. GUI sound settings lists only the dummy sound card alsamixer -c 0 ¦ Card: HDA Intel HDMI F1: Help ¦ ¦ Chip: Intel Haswell HDMI F2: System information ¦ ¦ View: F3:[Playback] F4: Capture F5: All F6: Select sound card ¦ ¦ Item: S/PDIF ¦ ¦ +--+ ¦ ¦ ¦OO¦ ¦ ¦ +--+ ¦ ¦ < S/PDIF > ¦ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 aplay -L default Playback/recording through the PulseAudio sound server null Discard all samples (playback) or generate zero samples (capture) pulse PulseAudio Sound Server hdmi:CARD=HDMI,DEV=0 HDA Intel HDMI, HDMI 0 HDMI Audio Output dmix:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample mixing device dsnoop:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct sample snooping device hw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Direct hardware device without any conversions plughw:CARD=HDMI,DEV=3 HDA Intel HDMI, HDMI 0 Hardware device with all software conversions cat /proc/asound/cards 0 [HDMI ]: HDA-Intel - HDA Intel HDMI HDA Intel HDMI at 0xf7d14000 irq 46 cat /proc/asound/devices 1: : sequencer 2: [ 0- 3]: digital audio playback 3: [ 0- 0]: hardware dependent 4: [ 0] : control 33: : timer mplayer -ao alsa:device=hdmi /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] alsa-lib: confmisc.c:768:(parse_card) cannot find card '1' [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:392:(snd_func_concat) error evaluating strings [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory [AO_ALSA] alsa-lib: confmisc.c:1251:(snd_func_refer) error evaluating name [AO_ALSA] alsa-lib: conf.c:4248:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory [AO_ALSA] alsa-lib: conf.c:4727:(snd_config_expand) Evaluate error: No such file or directory [AO_ALSA] alsa-lib: pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM hdmi [AO_ALSA] Playback open error: No such file or directory Failed to initialize audio driver 'alsa:device=hdmi' Could not open/initialize audio device -> no sound. Audio: no sound Video: no video Exiting... (End of file) mplayer -ao alsa:device=hw=0.3 /usr/share/sounds/ubuntu/stereo/system-ready.ogg MPlayer 1.1-4.8 (C) 2000-2012 MPlayer Team mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing /usr/share/sounds/ubuntu/stereo/system-ready.ogg. libavformat version 54.20.4 (external) Mismatching header version 54.20.3 libavformat file format detected. [lavf] stream 0: audio (vorbis), -aid 0 Load subtitles in /usr/share/sounds/ubuntu/stereo/ ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders libavcodec version 54.35.0 (external) AUDIO: 44100 Hz, 1 ch, floatle, 80.0 kbit/5.67% (ratio: 10000->176400) Selected audio codec: [ffvorbis] afm: ffmpeg (FFmpeg Vorbis) ========================================================================== [AO_ALSA] Format floatle is not supported by hardware, trying default. AO: [alsa] 44100Hz 2ch s16le (2 bytes per sample) Video: no video Starting playback... A: 0.4 (00.4) of 0.8 (00.7) 0.1% Exiting... (End of file) Thank you for your time and help :)

  Read the article

• Trying to run Compiz but it won't work!

  - by Ben Deslauriers

  ben@ben-ThinkCentre-XXXX:~$ compiz --replace Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...yes [LOG]: Moving Internal Files [LOG]: Copying subdirectory from /home/ben/.compiz/session to /home/ben/.compiz-1/session [LOG]: Copied file /home/ben/.compiz/session/10cd9233ce225949613394716379921200000016160046 to /home/ben/.compiz-1/session/10cd9233ce225949613394716379921200000016160046 [LOG]: Successfully moved internal files Backend : gconf Integration : true Profile : default Adding plugins Initializing core options...done Initializing composite options...done nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58 nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30 Initializing opengl options...done Initializing decor options...done Initializing grid options...done Initializing gnomecompat options...done Initializing place options...done Initializing session options...done Initializing move options...done Initializing mousepoll options...done Initializing resize options...done Initializing snap options...done Initializing vpswitch options...done Initializing animation options...done Initializing workarounds options...done Initializing fade options...done Initializing cube options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing rotate options...done Initializing ezoom options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator compiz (decor) - Warn: No default decoration found, placement will not be correct compiz (decor) - Warn: No default decoration found, placement will not be correct I have NO CLUE what I am doing wrong :( Please help. All I did was type in compiz --replace and it made my screen flicker and it showed this message in the terminal. I HAVE NO CLUE :(

  Read the article

• Intel I217LM ethernet controller not detected by Ubuntu 12.04LTS

  - by Alexandr Kurilin

  My last installation of Ubuntu 12.04 on a machine using an ASUS Q87M-E motherboard with an Intel I217LM Ethernet controller has failed to detect the ethernet card. The only thing displayed by ifconfig -a is the loopback. I double-checked in the BIOS, and the controller should be online. $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lspci 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Haswell PCI Express x16 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Haswell HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Lynx Point MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation Lynx Point KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation Device 153a (rev 04) 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Lynx Point HD Audio Controller (rev 04) 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-Port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) $ lsmod Module Size Used by vesafb 13844 1 snd_hda_codec_realtek 224173 1 arc4 12529 2 joydev 17693 0 usbhid 47238 0 hid 99636 1 usbhid rfcomm 47604 0 rt73usb 31735 0 crc_itu_t 12707 1 rt73usb rt2x00usb 20808 1 rt73usb rt2x00lib 55326 2 rt73usb,rt2x00usb mac80211 506862 2 rt2x00usb,rt2x00lib cfg80211 205774 2 rt2x00lib,mac80211 eeepc_wmi 13109 0 bnep 18281 2 asus_wmi 24456 1 eeepc_wmi sparse_keymap 13890 1 asus_wmi psmouse 97485 0 bluetooth 180153 10 rfcomm,bnep ppdev 17113 0 snd_hda_intel 33719 6 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_seq_midi 13324 0 snd_hwdep 17764 1 snd_hda_codec snd_rawmidi 30748 1 snd_seq_midi serio_raw 13211 0 snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq parport_pc 32866 1 snd 79041 21 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_pcm,snd_seq,snd_timer,snd_seq_device video 19651 0 soundcore 15091 1 snd wmi 19256 1 asus_wmi snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp $ ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:1091 errors:0 dropped:0 overruns:0 frame:0 TX packets:1091 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:80048 (80.0 KB) TX bytes:80048 (80.0 KB) wlan0 Link encap:Ethernet HWaddr 00:fd:07:91:a8:b9 inet addr:172.16.42.4 Bcast:172.16.42.255 Mask:255.255.255.0 inet6 addr: fe80::2fd:7ff:fe91:a8b9/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:56644 errors:0 dropped:0 overruns:0 frame:0 TX packets:36417 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:85270918 (85.2 MB) TX bytes:3413849 (3.4 MB) additionally, running sudo lshw -C network returns: *-network UNCLAIMED description: Ethernet Controller [...] I'm pretty stumped at this point. This doesn't sound like a very uncommon ethernet controller and I figured it would be picked up by the system. Does anybody have advice for how to deal with this? Anything specific I should look into to figure out what could be causing this? Edit: It seems that following the guide on the Intel e1000e drivers page allowed the card to start working. Is this a real fix or is there a better way?

  Read the article

• Unable to build my c++ code with g++ 4.6.3

  - by Mriganka

  I am facing multiple issues with building my c++ code on Ubuntu 12.04. This code was building and running fine on RH Enterprise. I am using g++ 4.6.3. Here's the output of g++ -v. g++ -v Using built-in specs. COLLECT_GCC=g++ COLLECT_LTO_WRAPPER=/usr/lib/gcc/i686-linux-gnu/4.6/lto-wrapper Target: i686-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Ubuntu/Linaro 4.6.3-1ubuntu5' --with-bugurl=file:///usr/share/doc/gcc-4.6/README.Bugs --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr --program-suffix=-4.6 --enable-shared --enable-linker-build-id --with-system-zlib --libexecdir=/usr/lib --without-included-gettext --enable-threads=posix --with-gxx-include-dir=/usr/include/c++/4.6 --libdir=/usr/lib --enable-nls --with-sysroot=/ --enable-clocale=gnu --enable-libstdcxx-debug --enable-libstdcxx-time=yes --enable-gnu-unique-object --enable-plugin --enable-objc-gc --enable-targets=all --disable-werror --with-arch-32=i686 --with-tune=generic --enable-checking=release --build=i686-linux-gnu --host=i686-linux-gnu --target=i686-linux-gnu Thread model: posix gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) Here's a sample of my code: #include "Word.h" #include < string> using namespace std; pthread_mutex_t Word::_lock = PTHREAD_MUTEX_INITIALIZER; Word::Word(): _occurrences(1) { memset(_buf, 0, 25); } Word::Word(char *str): _occurrences(1) { memset(_buf, 0, 25); if (str != NULL) { strncpy(_buf, str, strlen(str)); } } g++ -c -ansi or g++ -c -std=c++98 or g++ -c -std=c++03, none of these options are able to build the code correctly. I get the following compilation errors: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o Word.cpp: In constructor ‘Word::Word()’: Word.cpp:10:21: error: ‘memset’ was not declared in this scope Word.cpp: In constructor ‘Word::Word(char*)’: Word.cpp:16:21: error: ‘memset’ was not declared in this scope Word.cpp:19:34: error: ‘strlen’ was not declared in this scope Word.cpp:19:35: error: ‘strncpy’ was not declared in this scope Word.cpp: In member function ‘void Word::operator=(const Word&)’: Word.cpp:37:42: error: ‘strlen’ was not declared in this scope Word.cpp:37:43: error: ‘strncpy’ was not declared in this scope Word.cpp: In copy constructor ‘Word::Word(const Word&)’: Word.cpp:44:21: error: ‘memset’ was not declared in this scope Word.cpp:45:52: error: ‘strlen’ was not declared in this scope Word.cpp:45:53: error: ‘strncpy’ was not declared in this scope So basically g++ 4.6.3 on Ubuntu 12.04 is not able to recognize the standard c++ headers. And I am not finding a way out of this situation. Second problem: In order to make progress, I included < string.h instead of < string. But now I am facing linking errors with my message queue and pthread library functions. Here's the error that I am getting: mriganka@ubuntu:~/WordCount$ make g++ -c -g -ansi Word.cpp -o Word.o g++ -lrt -I/usr/lib/i386-linux-gnu Word.o HashMap.o main.o -o word_count main.o: In function `main': /home/mriganka/WordCount/main.cpp:75: undefined reference to `pthread_create' /home/mriganka/WordCount/main.cpp:90: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:93: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:113: undefined reference to `mq_send' /home/mriganka/WordCount/main.cpp:123: undefined reference to `pthread_join' /home/mriganka/WordCount/main.cpp:129: undefined reference to `mq_close' /home/mriganka/WordCount/main.cpp:130: undefined reference to `mq_unlink' main.o: In function `count_words(void*)': /home/mriganka/WordCount/main.cpp:151: undefined reference to `mq_open' /home/mriganka/WordCount/main.cpp:154: undefined reference to `mq_getattr' /home/mriganka/WordCount/main.cpp:162: undefined reference to `mq_timedreceive' collect2: ld returned 1 exit status Here's my makefile: CC=g++ CFLAGS=-c -g -ansi LDFLAGS=-lrt INC=-I/usr/lib/i386-linux-gnu SOURCES=Word.cpp HashMap.cpp main.cpp OBJECTS=$(SOURCES:.cpp=.o) EXECUTABLE=word_count all: $(SOURCES) $(EXECUTABLE) $(EXECUTABLE): $(OBJECTS) $(CC) $(LDFLAGS) $(INC) -pthread $(OBJECTS) -o $@ .cpp.o: $(CC) $(CFLAGS) $< -o $@ clean: rm -f *.o word_count Please help me to resolve both the issues. I searched online relentlessly for any solution of these problems, but no one seems to have encountered these issues.

  Read the article

• Can't adjust screen brightness on Macbook Pro 10,1 Ubuntu 13.10

  - by ben101

  I recently installed Ubuntu on my retina Macbook Pro (following this great guide: http://cberner.com/2013/03/01/installing-ubuntu-13-04-on-macbook-pro-retina/) Everything works fine so far however the screen brightness / backlight cannot be adjusted neither by using the assigned key nor by any other means. I know, I'm not the first to address this problem, but all the suggested solutions I found so far did not work for me. I unsuccessfully tried the following: Including Option "RegistryDwords" "EnableBrightnessControl=1" in the Devices-Section of /etc/X11/xorg.conf the application xbacklight I also haven't found any file such as mbp_backlight or apple_backlight on my system which probably would be a starting point I'm using the Nvidia-driver. (BTW: With the nouveau-driver, the keys to adjust the brightness work. However, with the nouveau driver Ubuntu does not resume from suspend mode) Any suggestions what I can do? Thanks!

  Read the article

• Why does Dropbox fail with a "dropboxd not found" error?

  - by Kevin

  This is a fresh install of Dropbox on a 12.04 server running on a 32bit system. It does not seem to fail the installation, but when I try to run it, I am told it can't find the file. Following the instructions on the Dropbox site, I get the following message: /home/kevin/.dropbox-dist/dropboxd: 10: exec: /home/kevin/.dropbox-dist/dropbox: not found Permissions currently being used: $ ls -l ~/.dropbox-dist/dropboxd -rwxrwxrwx 1 kevin kevin 258 Jun 13 20:40 /home/kevin/.dropbox-dist/dropboxd Has anyone had this problem and know a work around?

  Read the article

• Ubuntu 12.04 doesn't recgonize m CPU correctly

  - by Nightshaxx

  My computer is running ubuntu 12.04 (64bit), and I have a AMD Athlon(tm) X4 760K Quad Core Processor which is about 3.8ghz (and an Radeon HD 7770 GPU). Yet, when I type in cat /proc/cpuinfo - I get: processor : 0 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 apicid : 16 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 1 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 1 cpu cores : 2 apicid : 17 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 2 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 2 cpu cores : 2 apicid : 18 initial apicid : 2 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro processor : 3 vendor_id : AuthenticAMD cpu family : 21 model : 19 model name : AMD Athlon(tm) X4 760K Quad Core Processor stepping : 1 microcode : 0x6001119 cpu MHz : 1800.000 cache size : 2048 KB physical id : 0 siblings : 4 core id : 3 cpu cores : 2 apicid : 19 initial apicid : 3 fpu : yes fpu_exception : yes cpuid level : 13 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core arat cpb hw_pstate npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold bmi1 bogomips : 7599.97 TLB size : 1536 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm 100mhzsteps hwpstate cpb eff_freq_ro The important part of all this being, cpu MHz : 1800.000 which indicates that I have only 1.8ghz of processing power, which is totally wrong. Is it something with drivers or Ubuntu?? Also, will windows recognize all of my processing power? Thanks! (NOTE: My cpu doesn't have intigrated graphics

  Read the article

• ATI proprietary driver performance?

  - by Axel

  I'm about to (at least, want to..) buy a laptop with an ATI Radeon HD 4250, and I haven't a good opinion on ATI's drivers. How is the actual performance of the open/proprietary driver (currently I have nVidia, and I'm very satisfied)? The intended use for the laptop is: watching videos, programming in Java/PHP/maybe Qt... but, I like to know if Compiz runs well. Yes, I'm a hardcore (?) programmer that uses Compiz. :P Someone has this GPU? Experiences? Thoughts? Thanks! :D

  Read the article

• Window management shortcuts?

  - by pwnguin

  I've got a single massive monitor at home, and I've decided to mimic the Windows 7 window tiling shortcuts. I found a few guides online using wmctrl, and it's going well, save one thing: maximized windows don't respond to it. gconftool-2 --type string --set /apps/metacity/keybinding_commands/command_1 "wmctrl -r :ACTIVE: -e 0, 0,0, `xwininfo -root | grep Width | awk '{ print ($2/2)}'`, `xwininfo -root | grep Height | awk '{ print $2 }'`" (I've added line returns to make an otherwise massive one-liner readable.) I've bound this to a hotkey and it works, unless the window is maximized. Any ideas on how to fix this up?

  Read the article

• upgraded "Compiz' and "Unity", now no Unity 3D on screen

  - by user18432

  Today when I logged in to my Ubuntu 12.04, the update manager told me of some upgrades. Compiz and Unity were in those upgrades. After I installed the upgrades, I can no longer get the Unity panel on the left side of screen or the systray at the top of screen. I now have to run Ubuntu 12.04 with Unity 2D. My laptop is a HP Pavilion dv9000 with Nvidia GeForce Go 7600 video. I tried to run "unity --reset" but it says there are serious issues with compiz. I have cut & pasted the read out from the terminal below. [09:35:02] xxxxxxx@L01U1204:~$ unity --reset unity-panel-service: no process found Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : unity Adding plugins Initializing core options...done compiz (core) - Warn: failed to receive ConfigureNotify event on 0x2e00004 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x580005a compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3600006 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x3200255 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1600002 compiz (core) - Warn: failed to receive ConfigureNotify event on 0x1400002 Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing vpswitch options...done Initializing snap options...done Initializing mousepoll options...done Initializing resize options...done Initializing place options...done Initializing move options...done Initializing wall options...done Initializing grid options...done I/O warning : failed to load external entity "/home/brwright/.compiz/session/10afaca1703486b216133648409481824100000130110002" Initializing session options...done Initializing gnomecompat options...done Initializing animation options...done Initializing fade options...done Initializing unitymtgrabhandles options...done Initializing workarounds options...done Initializing scale options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done compiz (core) - Error: Couldn't load plugin '/usr/lib/compiz/libunityshell.so' : /usr/lib/compiz/libunityshell.so: undefined symbol: _ZNK5unity4dash10Controller6windowEv compiz (core) - Error: Couldn't load plugin 'unityshell' compiz (core) - Warn: unhandled ConfigureNotify on 0x7000090! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000093! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000096! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x7000099! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009c! compiz (core) - Warn: this should never happen. you should probably file a bug about this. compiz (core) - Warn: unhandled ConfigureNotify on 0x700009f! compiz (core) - Warn: this should never happen. you should probably file a bug about this. Initializing annotate options...done Initializing blur options...done Initializing clone options...done Initializing colorfilter options...done Initializing commands options...done Initializing cube options...done Initializing imgjpeg options...done Initializing kdecompat options...done Initializing mag options...done Initializing neg options...done Initializing obs options...done Initializing opacify options...done Initializing put options...done Initializing resizeinfo options...done Initializing ring options...done Initializing rotate options...done Initializing scaleaddon options...done Initializing screenshot options...done Initializing shift options...done Initializing staticswitcher options...done Initializing switcher options...done Initializing thumbnail options...done Initializing unityshell options...done Initializing water options...done Initializing winrules options...done Initializing wobbly options...done Setting Update "main_menu_key" Setting Update "run_key" Starting gtk-window-decorator As you can see the terminal never comes back to the CI prompt. I must do a control C to get to the CI prompt, but then the OS is frozen. I have to reboot and run Unity 2D in able to do anything on my laptop. I hope I have explained this enough and provided some useful info. I am at a loss to understand what the problem is, or what exactly what is causing the problem. Is it Unity or Compiz? Can anyone help?

  Read the article

• How to make text file created in Ubuntu compatible with Windows notepad

  - by Saurav Kumar

  Sometime I have to use the text files created in Ubuntu using editor like gedit, in Windows. So basically when ever I create a text file in Ubuntu I append the extension .txt, and it does make the file open in Windows very easily. But the actual problem is the text files created in Ubuntu are so difficult to understand(read) when opened in Windows' Notepad. No matter how many new lines have been used, all the lines appear in the same line. Is there a easy way to save the text files in Ubuntu's editors so that it can be seen exactly the same in Windows' notepad? Like some plugins of gedit which make it compatible with Windows' Notepad? or something else.. I searched but didn't get any help. I appreciate for the help. Thanks in advance!!

  Read the article

• LightDM will not start after stopping it

  - by Sweeters

  I am running Ubuntu 11.10 "Oneiric Ocelot", and in trying to install the nvidia CUDA developer drivers I switched to a virtual terminal (Ctrl-Alt-F5) and stopped lightdm (installation required that no X server instance be running) through sudo service lightdm stop. Re-starting lightdm with sudo service lightdm start did not work: A couple of * Starting [...] lines where displayed, but the process hanged. (I do not remember at which point, but I think it was * Starting System V runlevel compatibility. I manually rebooted my laptop, and ever since booting seems to hang, usually around the * Starting anac(h)ronistic cron [OK] log line (not consistently at that point, though). From that point on, I seem to be able to interact with my system only through a tty session (Ctrl-Alt-F1). I've tried purging and reinstalling both lightdm and gdm, as well as selecting both as the default display managers (through sudo dpkg-reconfigure [lightdm / gdm] or by manually editing /etc/X11/default-display-manager) through both apt-get and aptitude (that shouldn't make a difference anyway) after updating the packages, but the problem persists. Some of the responses I'm getting are the following: After running sudo dpkg-reconfigure lightdm (but not ... gdm) I get the following message: dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_NAME missing dpkg-maintscript-helper:warning: environment variable DPKG_MATINSCRIPT_PACKAGE missing After trying sudo service lightdm start or sudo start lightdm I get to see the boot loading screen again but nothing changes. If I go back to the tty shell I see lightdm start/running, process <num> but ps -e | grep lightdm gives no output. After trying sudo service gdm start or sudo starg gdm I get the gdm start/running, process <num> message, and gdm-binary is supposedly an active process, but all that happens is that the screen blinks a couple of times and nothing else. Other candidate solutions that I'd found on the web included running startx but when I try that I get an error output [...] Fatal server error: no screens found [...]. Moreover, I made sure that lightdm-gtk-greeter is installed but that did not help either. Please excuse my not including complete outputs/logs; I am writing this post from another computer and it's hard to manually copy the complete logs. Also, I've seen several posts that had to do with similar problems, but either there was no fix, or the one suggested did not work for me. In closing: Please help! I very much hope to avoid re-installing Ubuntu from scratch! :) Alex @mosi I did not manage to fix the NVIDIA kernel driver as per your instructions. I should perhaps mention that I'm on a Dell XPS15 laptop with an NVIDIA Optimus graphics card, and that I have bumblebee installed (which installs nvidia drivers during its installation, I believe). Issuing the mentioned commands I get the following: ~$uname -r 3.0.0-12-generic ~$lsmod | grep -i nvidia nvidia 11713772 0 ~$dmesg | grep -i nvidia [ 8.980041] nvidia: module license 'NVIDIA' taints kernel. [ 9.354860] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354864] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 9.354868] nvidia 0000:01:00.0: enabling device (0006 -> 0007) [ 9.354873] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.354879] nvidia 0000:01:00.0: setting latency timer to 64 [ 9.355052] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 280.13 Wed Jul 27 16:53:56 PDT 2011 Also, running aptitude search nvidia gives me the following: p nvidia-173 - NVIDIA binary Xorg driver, kernel module a p nvidia-173-dev - NVIDIA binary Xorg driver development file p nvidia-173-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-173-updates-dev - NVIDIA binary Xorg driver development file p nvidia-96 - NVIDIA binary Xorg driver, kernel module a p nvidia-96-dev - NVIDIA binary Xorg driver development file p nvidia-96-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-96-updates-dev - NVIDIA binary Xorg driver development file p nvidia-cg-toolkit - Cg Toolkit - GPU Shader Authoring Language p nvidia-common - Find obsolete NVIDIA drivers i nvidia-current - NVIDIA binary Xorg driver, kernel module a p nvidia-current-dev - NVIDIA binary Xorg driver development file c nvidia-current-updates - NVIDIA binary Xorg driver, kernel module a p nvidia-current-updates-dev - NVIDIA binary Xorg driver development file i nvidia-settings - Tool of configuring the NVIDIA graphics dr p nvidia-settings-updates - Tool of configuring the NVIDIA graphics dr v nvidia-va-driver - v nvidia-va-driver - I've tried manually installing (sudo aptitude install <package>) packages nvidia-common and nvidia-settings-updates but to no avail. For example, sudo aptitude install nvidia-settings-updates returns the following log: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 83 not upgraded. Need to get 0 B of archives. After unpacking 0 B will be used. Writing extended state information... Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initializing package states... Writing extended state information... The same happens with the Linux headers (i.e. I cannot seem to be able to install linux-headers-3.0.0-12-generic). The output of aptitude search linux-headers is as follows: v linux-headers - v linux-headers - v linux-headers-2.6 - i linux-headers-2.6.38-11 - Header files related to Linux kernel versi i linux-headers-2.6.38-11-generic - Linux kernel headers for version 2.6.38 on i A linux-headers-2.6.38-8 - Header files related to Linux kernel versi i A linux-headers-2.6.38-8-generic - Linux kernel headers for version 2.6.38 on v linux-headers-3 - v linux-headers-3.0 - v linux-headers-3.0 - i A linux-headers-3.0.0-12 - Header files related to Linux kernel versi p linux-headers-3.0.0-12-generic - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-generic- - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-server - Linux kernel headers for version 3.0.0 on p linux-headers-3.0.0-12-virtual - Linux kernel headers for version 3.0.0 on p linux-headers-generic - Generic Linux kernel headers p linux-headers-generic-pae - Generic Linux kernel headers v linux-headers-lbm - v linux-headers-lbm - v linux-headers-lbm-2.6 - v linux-headers-lbm-2.6 - p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-gene - Header files related to linux-backports-mo p linux-headers-lbm-3.0.0-12-serv - Header files related to linux-backports-mo p linux-headers-server - Linux kernel headers on Server Equipment. p linux-headers-virtual - Linux kernel headers for virtual machines @heartsmagic I did try purging and reinstalling any nvidia driver packages, but it did not seem to make a difference, My xorg.conf file contains the following: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• How to port email from evolution to thunderbird?

  - by jim

  I updated ubuntu to 11.10 using the update notification. I am also switching from Xubuntu to ubuntu - gnome interface. I have been using evolution for years and would like to port the emails to thunderbird. I have looked at the similar questions with no luck and the thunderbird help on manually importing. Most of these assume that the evolution file structure is similar to the evolution file structure. When I set up thunderbird it seems to have imported the contacts from evolution (and actually removed them from evolution. However no mail got transferred. I found the evolution mail in ~/.local/share/evolution/mail/local . this has folders.db and 3 directories - cur ,tmp, and new. then there are the hidden files and directories. Each directory has three related files with extensions .cmeta, .ibex.index, and .ibex.index.data. Then all the directories had files that seem to contain the individual messages. I have not looked at rhyme or reason to the file numbering/naming scheme. is there a nice way to import these files?

  Read the article

• Delete directory by referencing symbolic link

  - by Adam

  To set up the question, imagine this scenario: mkdir ~/temp cd ~/ ln -s temp temporary rm -rf temporary, rm -f temporary, and rm temporary each will remove the symbolic link but leave the directory ~/temp/. I have a script where the name of the symbolic link is easily derived but the name of the linked directory is not. Is there a way to remove the directory by referencing the symbolic link, short of parsing the name of the directory from ls -od ~/temporary?

  Read the article

• VMware Player 4.04 on Ubuntu 12.04 will not compile

  - by stephen mew

  I installed VMware-Player-4.0.4-744019.i386.bundle onto Ubuntu 11.10. This worked fine. I then upgraded to Ubuntu 12.04 The upgrade appeared to be successful. I then tried to start VMware Player and I got a popup "VMware Kernel Module Updater" I accept the process (click Install) The updater process runs, the output of which is; Stopping VMWare Services [green tick] Virtual Machine Monitor [RED exclamation mark] Virtual Network Device [green tick] VMware Blocking Filesystem [green tick] Virtual Machine Communication Interface [green tick] VMCI Sockets Error popup; Unable to start services See log file /tmp/vmware-root/modconfig-11912.log" Looking in the log file It seems that these are the complaints. 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:49.683Z| vthread-3| I120: Failed to compile module vmnet! I tried the patch for 4.0.3 and it did not work. Can anyone point me in the right direction here ? log file; 2012-07-11T15:35:18.618Z| vthread-3| I120: Log for VMware Workstation pid=11912 version=8.0.4 build=build-744019 option=Release 2012-07-11T15:35:18.618Z| vthread-3| I120: The process is 32-bit. 2012-07-11T15:35:18.618Z| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8 2012-07-11T15:35:18.618Z| vthread-3| I120: Host is Linux 3.2.0-26-generic Ubuntu 12.04 LTS 2012-07-11T15:35:18.616Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.616Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory. 2012-07-11T15:35:18.616Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.616Z| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values. 2012-07-11T15:35:18.617Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.617Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory. 2012-07-11T15:35:18.617Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.617Z| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values. 2012-07-11T15:35:18.617Z| vthread-3| I120: Msg_Reset: 2012-07-11T15:35:18.617Z| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory. 2012-07-11T15:35:18.617Z| vthread-3| I120: ---------------------------------------- 2012-07-11T15:35:18.617Z| vthread-3| I120: PREF Failed to load user preferences. 2012-07-11T15:35:18.618Z| vthread-3| W110: Logging to /tmp/vmware-root/modconfig-11912.log 2012-07-11T15:35:19.054Z| vthread-3| I120: modconf query interface initialized 2012-07-11T15:35:19.056Z| vthread-3| I120: modconf library initialized 2012-07-11T15:35:19.158Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.168Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.168Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.168Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.168Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.175Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.201Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.291Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.292Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.296Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.326Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.417Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.480Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.489Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.498Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.507Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.517Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.566Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.575Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.584Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.593Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.602Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.606Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.606Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.606Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.606Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.611Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.635Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.741Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:19.787Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.796Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.805Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.814Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.824Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:19.829Z| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-07-11T15:35:19.829Z| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-07-11T15:35:19.829Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:19.834Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.857Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:19.945Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:25.503Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.514Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.523Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.533Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:25.542Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:26.338Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:26.338Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:26.343Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:26.368Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:26.455Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:26.455Z| vthread-3| I120: Building module vmmon. 2012-07-11T15:35:26.455Z| vthread-3| I120: Extracting the sources of the vmmon module. 2012-07-11T15:35:26.484Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:35.469Z| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:35:35.470Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmmon.ko 2012-07-11T15:35:39.713Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:39.713Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:39.719Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:39.753Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:39.845Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:39.845Z| vthread-3| I120: Building module vmnet. 2012-07-11T15:35:39.846Z| vthread-3| I120: Extracting the sources of the vmnet module. 2012-07-11T15:35:39.913Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:49.683Z| vthread-3| I120: Failed to compile module vmnet! 2012-07-11T15:35:49.704Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:35:49.705Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:35:49.729Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:49.874Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:35:49.961Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:35:49.961Z| vthread-3| I120: Building module vmblock. 2012-07-11T15:35:49.961Z| vthread-3| I120: Extracting the sources of the vmblock module. 2012-07-11T15:35:50.159Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:35:59.283Z| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:35:59.284Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmblock.ko 2012-07-11T15:36:04.318Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:36:04.319Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:36:04.324Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:04.344Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:04.427Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:36:04.427Z| vthread-3| I120: Building module vmci. 2012-07-11T15:36:04.428Z| vthread-3| I120: Extracting the sources of the vmci module. 2012-07-11T15:36:04.456Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:15.728Z| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:36:15.730Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vmci.ko 2012-07-11T15:36:20.349Z| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-26-generic. 2012-07-11T15:36:20.350Z| vthread-3| I120: Validating path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic 2012-07-11T15:36:20.355Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:20.378Z| vthread-3| I120: Your GCC version: 4.6 2012-07-11T15:36:20.464Z| vthread-3| I120: Header path /lib/modules/3.2.0-26-generic/build/include for kernel release 3.2.0-26-generic is valid. 2012-07-11T15:36:20.464Z| vthread-3| I120: Building module vmci. 2012-07-11T15:36:20.464Z| vthread-3| I120: Extracting the sources of the vmci module. 2012-07-11T15:36:20.514Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:22.732Z| vthread-3| I120: Building module vsock. 2012-07-11T15:36:22.732Z| vthread-3| I120: Extracting the sources of the vsock module. 2012-07-11T15:36:22.783Z| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-26-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-07-11T15:36:33.825Z| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-26-generic/misc. 2012-07-11T15:36:33.826Z| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-26-generic/misc/vsock.ko

  Read the article

• How to Disable Touchpad tap in Toshiba Tecra R850 in Oneiric

  - by Kibi

  I know there's a lot of similar questions, but nothing I have tried here works yet - perhaps I was doing it wrong. New Laptop - Toshiba Tecra R850 with an install of Oneiric. Mostly things are working well, but I have a problem with the touchpad (or whatever it's called) - whenever I use it for moving the mouse pointer I accidentally tap on it - basically I am clicking all over the place by accident. So I want to disable the tap-as-click (after all, I have buttons for clicks too). I open up "Mouse and Touchpad" and on the Touchpad tab I check "Disable touchpad when typing" and UNcheck "Enable mouse clicks with touchpad". This does not achieve anything. The only piece of code I had which worked at all was to completely disable the touchpad by removing the driver - but that is no use since I WANT the mousing ability, just not the tap. In fact, even that would be good if I could still use the little blue stick thing and the other buttons - but it disabled them too. Tried installing touchpad indicator but it didn't seem to want to install. There were suggestions to put stuff into /usr/share/X11/xorg.conf.d so I edited 50-synaptics.conf and added the line Option "TapButton1" "0" But it didn't work and I'm not surprised since the place, syntax and values were all a guess really... Any ideas? This is really annoying. Thanks Kibi

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >