Search Results

Search found 17172 results on 687 pages for 'event logicon supply chai'.

Page 86/687 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • Connect a 2.5" (laptop hard disk) SATA hard disk to Desktop PC

    - by Lawliet
    Can I connect a laptop SATA hard disk to Desktop PC? Do I have to use some adapters or I can just plug in SATA power connector and SATA data cable like my Desktop hard disk is connected? I noticed that both laptop and desktop SATA disks use same connectors, but I'm afraid that I might fry my laptop hard disk because the SATA connector has both 12V and 5V voltage (given the fact that laptop hard disks has input voltage of 5V) I bought a all-in-one Modex-to-SATA power adapter and SATA cable and I still don't know what to do. I have read various forums and a lot of people are stating that it's perfectly ok, but some are scaring me that by connecting it so, it fried their hard disk. And some also mentioned cutting the yellow 12V wire if I'm planning to use Modex-to-SATA power. Thanks in advance

    Read the article

  • Is it possible (and safe/reliable/non-damaging) to use a 20-pin ATX PSU with a 24-pin ATX motherboar

    - by Legooolas
    I have a reasonably-decent old 20-pin PSU which I want to use on a newer 24-pin ATX motherboard. I see that the ATX page on wikipedia mentions that 24-pin ATX is backward-compatible, and I can find 20-to-24 pin adapters to buy for a couple of dollars/pounds at lots of places, but I can't find any mention of restrictions on the use of these. Will this work on any motherboard, or is it a per-motherboard compatibility question? Are there any other restrictions like the level of power available (and hence the additional 4 pins with +12, +5 and +3.3V lines which are already on other pins)?

    Read the article

  • Eclipse And Linux: Keyboard unusable after gnome-screen-saver

    - by martijn-courteaux
    Hi, I know this is not programming related. But I can't find any topics on Google or UbuntuForums. So the problem is: When gnome-screensaver starts on the moment Eclipse has the focus and I wake up again my laptop, Eclipse doesn't listen to keyboard-events. To solve this I have to change the focus to another program and then back to Eclipse. Than it works again. This isn't a real problem, but it would be nice if someone can solve it. Thanks

    Read the article

  • Game Over function is not working Starling

    - by aNgeLyN omar
    I've been following a tutorial over the web but it somehow did not show something about creating a game over function. I am new to the Starling framework and Actionscript so I'm kind of still trying to find a way to make it work. Here's the complete snippet of the code. package screens { import flash.geom.Rectangle; import flash.utils.getTimer; import events.NavigationEvent; import objects.GameBackground; import objects.Hero; import objects.Item; import objects.Obstacle; import starling.display.Button; import starling.display.Image; import starling.display.Sprite; import starling.events.Event; import starling.events.Touch; import starling.events.TouchEvent; import starling.text.TextField; import starling.utils.deg2rad; public class InGame extends Sprite { private var screenInGame:InGame; private var screenWelcome:Welcome; private var startButton:Button; private var playAgain:Button; private var bg:GameBackground; private var hero:Hero; private var timePrevious:Number; private var timeCurrent:Number; private var elapsed:Number; private var gameState:String; private var playerSpeed:Number = 0; private var hitObstacle:Number = 0; private const MIN_SPEED:Number = 650; private var scoreDistance:int; private var obstacleGapCount:int; private var gameArea:Rectangle; private var touch:Touch; private var touchX:Number; private var touchY:Number; private var obstaclesToAnimate:Vector.<Obstacle>; private var itemsToAnimate:Vector.<Item>; private var scoreText:TextField; private var remainingLives:TextField; private var gameOverText:TextField; private var iconSmall:Image; static private var lives:Number = 2; public function InGame() { super(); this.addEventListener(starling.events.Event.ADDED_TO_STAGE, onAddedToStage); } private function onAddedToStage(event:Event):void { this.removeEventListener(Event.ADDED_TO_STAGE, onAddedToStage); drawGame(); scoreText = new TextField(300, 100, "Score: 0", "MyFontName", 35, 0xD9D919, true); remainingLives = new TextField(600, 100, "Lives: " + lives +" X ", "MyFontName", 35, 0xD9D919, true); iconSmall = new Image(Assets.getAtlas().getTexture("darnahead1")); iconSmall.x = 360; iconSmall.y = 40; this.addChild(iconSmall); this.addChild(scoreText); this.addChild(remainingLives); } private function drawGame():void { bg = new GameBackground(); this.addChild(bg); hero = new Hero(); hero.x = stage.stageHeight / 2; hero.y = stage.stageWidth / 2; this.addChild(hero); startButton = new Button(Assets.getAtlas().getTexture("startButton")); startButton.x = stage.stageWidth * 0.5 - startButton.width * 0.5; startButton.y = stage.stageHeight * 0.5 - startButton.height * 0.5; this.addChild(startButton); gameArea = new Rectangle(0, 100, stage.stageWidth, stage.stageHeight - 250); } public function disposeTemporarily():void { this.visible = false; } public function initialize():void { this.visible = true; this.addEventListener(Event.ENTER_FRAME, checkElapsed); hero.x = -stage.stageWidth; hero.y = stage.stageHeight * 0.5; gameState ="idle"; playerSpeed = 0; hitObstacle = 0; bg.speed = 0; scoreDistance = 0; obstacleGapCount = 0; obstaclesToAnimate = new Vector.<Obstacle>(); itemsToAnimate = new Vector.<Item>(); startButton.addEventListener(Event.TRIGGERED, onStartButtonClick); //var mainStage:InGame =InGame.current.nativeStage; //mainStage.dispatchEvent(new Event(Event.COMPLETE)); //playAgain.addEventListener(Event.TRIGGERED, onRetry); } private function onStartButtonClick(event:Event):void { startButton.visible = false; startButton.removeEventListener(Event.TRIGGERED, onStartButtonClick); launchHero(); } private function launchHero():void { this.addEventListener(TouchEvent.TOUCH, onTouch); this.addEventListener(Event.ENTER_FRAME, onGameTick); } private function onTouch(event:TouchEvent):void { touch = event.getTouch(stage); touchX = touch.globalX; touchY = touch.globalY; } private function onGameTick(event:Event):void { switch(gameState) { case "idle": if(hero.x < stage.stageWidth * 0.5 * 0.5) { hero.x += ((stage.stageWidth * 0.5 * 0.5 + 10) - hero.x) * 0.05; hero.y = stage.stageHeight * 0.5; playerSpeed += (MIN_SPEED - playerSpeed) * 0.05; bg.speed = playerSpeed * elapsed; } else { gameState = "flying"; } break; case "flying": if(hitObstacle <= 0) { hero.y -= (hero.y - touchY) * 0.1; if(-(hero.y - touchY) < 150 && -(hero.y - touchY) > -150) { hero.rotation = deg2rad(-(hero.y - touchY) * 0.2); } if(hero.y > gameArea.bottom - hero.height * 0.5) { hero.y = gameArea.bottom - hero.height * 0.5; hero.rotation = deg2rad(0); } if(hero.y < gameArea.top + hero.height * 0.5) { hero.y = gameArea.top + hero.height * 0.5; hero.rotation = deg2rad(0); } } else { hitObstacle-- cameraShake(); } playerSpeed -= (playerSpeed - MIN_SPEED) * 0.01; bg.speed = playerSpeed * elapsed; scoreDistance += (playerSpeed * elapsed) * 0.1; scoreText.text = "Score: " + scoreDistance; initObstacle(); animateObstacles(); createEggItems(); animateItems(); remainingLives.text = "Lives: "+lives + " X "; if(lives == 0) { gameState = "over"; } break; case "over": gameOver(); break; } } private function gameOver():void { gameOverText = new TextField(800, 400, "Hero WAS KILLED!!!", "MyFontName", 50, 0xD9D919, true); scoreText = new TextField(800, 600, "Score: "+scoreDistance, "MyFontName", 30, 0xFFFFFF, true); this.addChild(scoreText); this.addChild(gameOverText); playAgain = new Button(Assets.getAtlas().getTexture("button_tryAgain")); playAgain.x = stage.stageWidth * 0.5 - startButton.width * 0.5; playAgain.y = stage.stageHeight * 0.75 - startButton.height * 0.75; this.addChild(playAgain); playAgain.addEventListener(Event.TRIGGERED, onRetry); } private function onRetry(event:Event):void { playAgain.visible = false; gameOverText.visible = false; scoreText.visible = false; var btnClicked:Button = event.target as Button; if((btnClicked as Button) == playAgain) { this.dispatchEvent(new NavigationEvent(NavigationEvent.CHANGE_SCREEN, {id: "playnow"}, true)); } disposeTemporarily(); } private function animateItems():void { var itemToTrack:Item; for(var i:uint = 0; i < itemsToAnimate.length; i++) { itemToTrack = itemsToAnimate[i]; itemToTrack.x -= playerSpeed * elapsed; if(itemToTrack.bounds.intersects(hero.bounds)) { itemsToAnimate.splice(i, 1); this.removeChild(itemToTrack); } if(itemToTrack.x < -50) { itemsToAnimate.splice(i, 1); this.removeChild(itemToTrack); } } } private function createEggItems():void { if(Math.random() > 0.95){ var itemToTrack:Item = new Item(Math.ceil(Math.random() * 10)); itemToTrack.x = stage.stageWidth + 50; itemToTrack.y = int(Math.random() * (gameArea.bottom - gameArea.top)) + gameArea.top; this.addChild(itemToTrack); itemsToAnimate.push(itemToTrack); } } private function cameraShake():void { if(hitObstacle > 0) { this.x = Math.random() * hitObstacle; this.y = Math.random() * hitObstacle; } else if(x != 0) { this.x = 0; this.y = 0; lives--; } } private function initObstacle():void { if(obstacleGapCount < 1200) { obstacleGapCount += playerSpeed * elapsed; } else if(obstacleGapCount !=0) { obstacleGapCount = 0; createObstacle(Math.ceil(Math.random() * 5), Math.random() * 1000 + 1000); } } private function animateObstacles():void { var obstacleToTrack:Obstacle; for(var i:uint = 0; i<obstaclesToAnimate.length; i++) { obstacleToTrack = obstaclesToAnimate[i]; if(obstacleToTrack.alreadyHit == false && obstacleToTrack.bounds.intersects(hero.bounds)) { obstacleToTrack.alreadyHit = true; obstacleToTrack.rotation = deg2rad(70); hitObstacle = 30; playerSpeed *= 0.5; } if(obstacleToTrack.distance > 0) { obstacleToTrack.distance -= playerSpeed * elapsed; } else { if(obstacleToTrack.watchOut) { obstacleToTrack.watchOut = false; } obstacleToTrack.x -= (playerSpeed + obstacleToTrack.speed) * elapsed; } if(obstacleToTrack.x < -obstacleToTrack.width || gameState == "over") { obstaclesToAnimate.splice(i, 1); this.removeChild(obstacleToTrack); } } } private function checkElapsed(event:Event):void { timePrevious = timeCurrent; timeCurrent = getTimer(); elapsed = (timeCurrent - timePrevious) * 0.001; } private function createObstacle(type:Number, distance:Number):void{ var obstacle:Obstacle = new Obstacle(type, distance, true, 300); obstacle.x = stage.stageWidth; this.addChild(obstacle); if(type >= 4) { if(Math.random() > 0.5) { obstacle.y = gameArea.top; obstacle.position = "top" } else { obstacle.y = gameArea.bottom - obstacle.height; obstacle.position = "bottom"; } } else { obstacle.y = int(Math.random() * (gameArea.bottom - obstacle.height - gameArea.top)) + gameArea.top; obstacle.position = "middle"; } obstaclesToAnimate.push(obstacle); } } }

    Read the article

  • Free Windows Application Blocker/Monitor

    - by Click Ok
    I want a free application monitor that when detects certain keywords on window title by example, it closes the application (or prevents that it opens/install). Nice extra will be if the program log the application activity too and internet sites accessed by any browser. Thank you very much! PS: I'm using Windows 7 Ultimate.

    Read the article

  • Can unexpected power loss harm a Linux install?

    - by Johan Elmander
    I am developing an application on a Linux embedded board (runs Debian) e.g. Raspberry Pi, Beagle Board/Bone, or olimex. The boards works on an environment that the electricity is cut unexpectedly (it is far complicated to place PSU, etc.) and it would happen every day couple times. I wonder if the unexpected power cuts would cause crash/problem on the Linux Operation System? If it is something that I should worry, what would you suggest to prevent the damages on OS against the unexpected power cuts? PS. The application needs to writes some data to the storage medium (SD card), I think it would not be suitable to mount it as read-only.

    Read the article

  • No power to HP pavilion dv 1000

    - by Imajica666
    I am working on a friends laptop. I get no power indicator light while plugged in to ac outlet. Will not power on with just the battery. Might this be a case of replacing the system board? I have never broken open a laptop so I am not sure what the best path to take might be. Thanks for any opinions.

    Read the article

  • Laptop accessories for mobile warrior (light power adapter & case/bag)

    - by wonsungi
    Lugging my X301 between work and home, I realized my laptop's accessories weigh more than the laptop itself! I'm ordering a 2nd AC power adapter so I don't even have to carry one at all, but I may as well get the lightest one possible. My X301 came with a pretty svelt 65W power adapter, but can anyone suggest a lighter power adapter or confirm the weights I've found below? mass vol dimensions W Model ---- ------- ----------- --- ------------------- 210g 149cm^3 108x46x30mm 65W Coolermaster [NA 65] 244g 189cm^3 140x75x18mm 65W ThermalTake [ADP65W0001] 260g 130cm^3 104x43x29mm 65W Lenovo (came with X301) 326g 198cm^3 145x76x18mm 95W Coolermaster [SNA 95] 330g 180cm^3 150x60x20mm 90W Kensington USB [K38030US] Apple's 60W power adapter seems much smaller/lighter than the PC products listed above, so I think a better PC power adapter could exist. There are much smaller 45W "netbook" adapters, but are these too weak for my X301? I would not mind if it just meant the battery couldn't charge while the laptop was on, but I am afraid there will be worse consequences. Also, I have decided to swap my Logitech Kinetik briefcase for a Tom Bihn Ristretto. Less protection, but much lighter, less bulky, and easier to carry. Any suggestions for better laptop cases/bags?

    Read the article

  • Network connectivity logs on OSX

    - by Stephen
    I'm trying to determine whether or not Macs store a log of network connectivity. Specifically, I'm trying to find out if one of my machines (Mac Tower, OSX 10.7.4, 2-2.26 GHz, 16 GB DDR3) lost connection to pinpoint an issue. This machine is on an external network where and the IT staff is not very helpful, so I'm trying to ensure that there were network issues rather than some other local issue on that particular machine. Can you pull network logs thru Console that show when a network connection was established and was disconnected?

    Read the article

  • Software to measure power draw of HP Server

    - by tombull89
    I'm after some software to measure the power draw of a HP Server, namely a DL360 series. I know Nagios is used for logging and monitering but I'm not sure if it logs power usage as well. I've also tried to find the HP Server Management package but am not sure if this shows power usage either. I'm thinking my best bet would to buy some sort of device that goes inbetween the wall and the servers plug. Can anybody suggest what would do for me?

    Read the article

  • Windows keyboard macro playback software?

    - by WilliamKF
    Many years ago, I had a product called Quickeys for the Macintosh that allowed me to record keyboard and mouse events and create a macro that could be assigned to a keyboard accelerator. This was a really useful tool, but I haven't seen anything like it ever on Microsoft Windows OS platform. Does such a product exist?

    Read the article

  • Minimum power requirement for VGA vs. its working

    - by Shiki
    Got a new XFX GTX260^2 video card. The only problem is the "Minimum power" is 500W on the box. I've got a Chieftec 450AA PSU with just a minimal number of attached stuff (1hdd, WD green; 6gb (4module) ram; dvd writer). Bought a cable for the 6pin power input on the card. Got picture, works in every aspect. Still. Should I get a new PSU (like a Corsair or Antec 600W)? Will the card perform slower with this PSU? (Yeah the last part is a particular question but in I'm also asking in generic. I was wondering about this so many times and I hope we'll put and end for this question for once and for all.)

    Read the article

  • Melting plastic around DC-in jack in laptop

    - by Ove
    I recently noticed that the plastic around the DC-in jack of my laptop was warped (melted) a little bit. Since I noticed, I have done some experiments, and saw that the metal tip of the charger heats up very much when I am gaming, or performing CPU-intensive work (it's so hot that i can't hold it between my fingers). When I am using Windows normally (web browsing, music, video), the tip is not hot. I tried using another charger from a compatible laptop, but its metal tip overheated as well, so the problem is not caused by the charger. I have been using this laptop for gaming for 1.5 years and I never had this problem. When gaming I always use a laptop cooler. Dust is not the problem (i cleaned out the dust), and the CPU and GPU temperatures are not higher than when I got the laptop. The only thing that is excessively hot is the charger tip. Because I bought my laptop from the USA, sending it to warranty and back would cost more than the laptop's value, so I need to fix it myself. I have googled around, and I saw that the problem might be the DC-in jack that is located on the motherboard of the laptop. I plan to take the laptop apart and see if it has become loose, and soldering it in place if it has. My questions for you are: Did anyone deal with this problem in the past? Did anyone manage to fix it? Is the DC-in jack the culprit in this case? Or is it possible for the problem to be caused by another part on the motherboard? Is there any way I can check the DC-in jack with a multimeter? What should I measure (resistance, etc)? EDIT: My laptop is a Sager NP5135 (aka Clevo B5130M). I also posted on NBR, including some pictures: link

    Read the article

  • CPU fan twitching phase leds blinking - computer won't boot

    - by SooX
    I have a big problem that I got today. Yesterday computer was "on" normally, I went to sleep without shutting it down. When I woke up, I heard a strange sound and was unable to bring it up from hibernate. I unplugged the PSU. When I plugged the PSU back in, the sound came back. When I opened the case, I saw the fan "twitching" like it is about to start and fan LEDs were blinking. Also, motherboard LEDs were blinking in the same pattern - the first green one has more of luminosity then others. When I cut down the power with 0/1 button on PSU, the fans continue to make sounds like the machine is trying to boot before the capacitors run out and the power dies. Does anyone have a clue what to do? I tried disassembling everything but that doesn't work. I will try with friend's PSU later today.

    Read the article

  • Forward Windows Events Logs to Rsyslog

    - by SamCulley
    Thanks for taking time to read this post. Basically I would like to forward Windows Events Logs from all my desktop clients to a linux box with rsyslog on. Rsyslog provide a Windows agent to do just that but its 40 euros per license and when you have x amount of machines that cost adds up. I was wondering if there is a FOSS alternative available I have tried searching the Google but haven't managed to find anything. Hopefully someone might already faced this same problem and are using an alternative that they could recommend. Again thanks for reading, Kind Regards Sam

    Read the article

  • Touchpad stops working when plugging in new laptop PSU

    - by drahcir
    I recently bought a psu for my Compaq 6710b and when I plug it in to the laptop the touchpad seems to go stop working, especially when the laptop is charging. I checkout this site and it suggests that the problem might be static electricity building up due to poor earthing.I tried replacing the cable that leads from the psu to the wall socket with the one I had of my old psu but to no avail. I even tried to see if I put the psu farther away might reduce to interference but also resulted in failure. Any ideas on how I could solve this problem?

    Read the article

  • Computer turns itself on after any off mode

    - by Patrick
    Whenever I shut down my computer, or put it in sleep/hybernate, it turns on after two seconds. It doesn't post, it just powers on and then idles. To actually turn it off, I switch off the psu. The problem is now, whenever I switch the psu on and try to boot, it doesn't always turn on. It takes a good amount of flicking the psu switch on and off before the motherboard lights up. So far I've determined the things its not: its not caused by the mouse or network waking up the computer. I've been able to go into hybernate for the past year. And all "wake on X" settings in the bios are diabled. its not a scheduled task waking up the computer at a given hour, it occurs every single time its not due to an upgrade or new installation, since I haven't done either in a very long time I'm sure its a hardware issue. So I'd like to know, is my psu dead, or the motherboard? The psu is an Antec Earthwatts 600w, the motherboard is an Asus P5Q-E, both one year old.

    Read the article

  • NVIDIA Tesla K20C in Dell PowerEdge R720xd --- power cables

    - by CptSupermrkt
    I am trying to put an NVIDIA Tesla K20C into a Dell PowerEdge R720xd. I'm having a bit of trouble understanding the power requirements of the card. First, here is a picture of two pages of the same manual, which seems contradictory to me. One page says only a single connector is required, while the next page says both are required. The entire manual for the card can be found here: http://www.nvidia.com/content/PDF/kepler/Tesla-K20-Active-BD-06499-001-v02.pdf Here is an photo taken of the power connections on the card: And here is a photo of where those connectors need to go, onto the PCI-E riser of the r720xd: Neither the R720xd NOR the GPU came with the necessary cables. And given what appears to be a contradiction in the GPU manual (above), I'm not even sure at this point what we actually need. I have searched high and low online for things like 2x6 pin PCI-E to 8 pin male-to-male and so on, and for the life of me cannot find what we need. In case anyone needs it, the owner's manual of the R720xd can be found here: ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_poweredge/poweredge-r720xd_Owner%27s%20Manual_en-us.pdf The relevant page is page 68, which clearly indicates that the 8-pin female port on the riser card is for a GPU. The bottom line question: exactly what power cables do we need to buy, and where can we find them?

    Read the article

  • creating a journal/blog

    - by DijnsK
    hi, im trying to replace our current journal (excel sheet) with a web portal based journal. something kind of like twitter, but with more options. also needs to have a login so we can track the people entering. it can also be some sort of tool but i cant find anything that meets our demands... i could use a ITIL ticket service but that has way to much functionalities for our use. im basicly looking for a webportal with a shared blog, where users can login and creat new entries with: a topic name a automated follow-up ID number a field where they can enter specific info a reply field and a status field with pre defined statuses can anyone help me with this? thanks in advance. Koen

    Read the article

  • Advantages of a 130W vs 90W ac adapter?

    - by David
    I purchased a Lenovo T420S laptop with a 90W/20V AC adapter P/N 42t4426 through my IT department. Subsequently, I ordered a replacement adapter and received a 135W/20V AC adapter P/N 45N0054. The 135W version is about twice as big and heavy as the 90W version. Is there an advantage to the 135W version like faster battery recharging? Are there any negative effects (other than weight), like reduced battery life?

    Read the article

  • What PSU is usually used in mini-ITX cases/chassis?

    - by Subaru Tashiro
    The mini-ITX computer will be a general use computer. Not a dedicated HTPC or Home server. In general use mini-ITX cases, what PSU form factor is usually used? I understand that some case manufacturers provide custom built PSU to fit their case but I prefer to get the ones that use a PSU that follows standard form factors in case a replacement is needed. For example, what PSU fits into general purpose cases by Lian Li? Am I to assume that smaller PSU form factors also affect the possible maximum output?

    Read the article

  • UPS for hard drive protection

    - by dimi
    I am in a place where electricity is not ideal (old house, no ground), sometimes it occasionally shuts down and supposedly there are some spikes. I consider using UPS with the goal to increase safety of my personal data. My first priority is the health of my internal and external USB hard drives which can be damaged due to possible power instability. I do not care that much about possible losses of not-saved work, instead I just want to let my system have a minimum time to turn off without any risk of physical damaging my hard drives. Would a cheap offline UPS suit my neads? Or do i need a better one with automatic voltage regulator (AVR)? How critical is AVR for the hard drives? The external ones require their own power supplies and will be plugged directly into UPS.

    Read the article

  • Can't seem to get chassis fans running

    - by TK Kocheran
    I've got a ASUS ROG Maximus V Extreme and I'm trying to connect my fans to the chassis fan pins to get them running according to the motherboard. I know for sure that my fans work, as when I test them with my Molex connector, they all happily power on. Here's two of my chassis fans connectors (there are 3-4): Here's the connector that came with either my motherboard or the PSU, can't remember :) I've never seen one of these strange cables before. All I know is that if I plug in the 4-pin mobo connector to either of these fan plugs, fans don't come on and don't show up in the BIOS. (Motherboard has a crazy awesome UEFI BIOS and shows you if it sees the fans.) If I try plugging the 4-pin connection into the mobo and the other side into the PSU, I can't POST. If I plug the PSU connector in without the mobo connector, fans come on. What could I be doing wrong here? Is it a problem with the cable I'm using? Is there something I may have missed in the build?

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >