Search Results

Search found 5438 results on 218 pages for 'ide hdd'.

Page 86/218 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Disk failure is imminent Laptop Hard drive ~5 months old

    - by Drew
    There's another post about this, but I don't have enough 'points' to say anything on that thread. So I'll start my own ... with more details! My computer still boots, but gnome domain reports problems with HDD smart. This has been confirmed in the bios as it makes me press f1 to boot up now. I tried running HDD disk check in the bios, but it fails running the tests. As in, running the tests failed not that the tests themselves indicated a failed drive. Here is what disk utility is reporting as failing: Reallocated Sector Count FAILING Normalized: 132 Worst: 132 Threshold: 140 Value: 544 Current Pending Sector Count WARNING Normalized: 200 Worst: 1 Threshold: 0 Value: 2 Is this related to the insane number of DRDY errors on the drive? kernel: [51345.233069] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51345.233076] ata1.00: BMDMA stat 0x4 kernel: [51345.233081] ata1.00: failed command: READ DMA kernel: [51345.233090] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51345.233092] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51345.233097] ata1.00: status: { DRDY ERR } kernel: [51345.233103] ata1.00: error: { UNC } kernel: [51345.291929] ata1.00: configured for UDMA/100 kernel: [51345.291944] ata1: EH complete kernel: [51347.682748] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 kernel: [51347.682754] ata1.00: BMDMA stat 0x4 kernel: [51347.682759] ata1.00: failed command: READ DMA kernel: [51347.682768] ata1.00: cmd c8/00:00:00:8b:4a/00:00:00:00:00/e0 tag 0 dma 131072 in kernel: [51347.682770] res 51/40:00:a8:8b:4a/10:04:00:00:00/e0 Emask 0x9 (media error) kernel: [51347.682774] ata1.00: status: { DRDY ERR } kernel: [51347.682777] ata1.00: error: { UNC } Did Ubuntu 10.10 and/or EXT4 eat my work laptop? What steps can I take to backup my important information, which is probably the home folder. Please include steps to recover my data on the new hard drive as well. It does me little good to have backups I can't use.

    Read the article

  • 12.04 kernel panic

    - by jesus
    Hello I'm having trouble with Ubuntu 12.04. I downloaded the ISO and burned it into a CD and tried to install Ubuntu, but during the installation process, I got this message Kernel panic-not syncing Attempted to kill init! pid:1,comm:init not tainted 3.2.0-23-generic-pae#36-ubunru then it says switching to console text, and it just hangs in there and nothing happens. I burned another CD with Ubuntu 10.04, but I get a different problem: Ubuntu just gets stuck at the splash screen with the 5 dots which move from red to white, and nothing happens. I was able to boot before with 10.04 but I recently upgraded my computer graphics card and power supply. please see my system specs. Gigabyte GA-M68M-S2P (rev. 2.3) GeForce 7025 Chipset Athalon II x4 640 QuadCore Radeon HD 6870 sapphire OCZ ModXStream Pro 600W Modular High Performance Power Supply 3 hard drives one is IDE and the other two SATA IDE DVD Drive If any one could help me, I'd be most appreciative. If it helps I tried the F6 option like acpi=off noapic nolapic nomodset but i still get kernel panic

    Read the article

  • Suggested Resources Visual Studio Plug-In

    Todays post is a quick plug for a new tool developed by my friend Olaf Conijn, who (amongst other things) has been a developer on several versions of Enterprise Library. His new tool is called Suggested Resources for .NET Developers, and the current 0.8 release works with both Visual Studio 2008 and Visual Studio 2010. So what does it do? Well heres what Olaf has to say: This Visual Studio Integration Package is a proof of concept in: Aggregation of online content within the Visual Studio IDE. Analysis of development activities within the Visual Studio IDE. This combination of features allows Suggested Resources for .NET developers to pro-actively suggest online content that applies on the task being performed by a developer... A bit like having a programming pair that searches for online resources while you focus on getting the job done. For more info, screenshots and downloads, head to the Codeplex project site or the Visual Studio Gallery page.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • How can I convince my boss to invest into the developer environment?

    - by user95291
    Our boss said that developers should have fewer mistakes so the company would have money for displays, servers etc. An always mentioned example is a late firing of an underperforming colleague whose salary would have covered some of these expenses. On the other hand it happened a few times that it took a few days to free up some disk space on our servers since we can't get any more disk. The cost of mandays was definitely higher than the cost of a new HDD. Another example is that we use 14-15" notebooks for development and most of the developers get external displays after they spent one year at the company. The price of a 22-24" display is just a small fraction of a developers annual salary. Devs say that they like the company because of other reasons (high quality code, interesting projects etc.) but this kind of issues not just simply time-consuming but also demotivate them. In the point of view of the developers it seems that the boss always can find an issue in the past which they could have been done better so it's pointless to work better to get for a second display/HDD/whatever. How can I convince my boss to invest more into development environment? Is it possible to break this endless loop?

    Read the article

  • How do I install BCM4312 wireless drivers?

    - by t3ch
    completely new to Ubuntu. How do I add Wireless driver for my laptop? I am running a Dell XPS M1330. Right now its acts as if I dont have a Wi-Fi card. :~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02) 00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 01:00.0 VGA compatible controller: nVidia Corporation G86 [GeForce 8400M GS] (rev a1) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) 09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express (rev 02) 0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)

    Read the article

  • Recommended total system backup solution

    - by bioShark
    I hope this question won't get closed immediately since it has a generic title. I already searched a bit around the answers here, but nothing satisfied me. I want a back-up solution that makes a total back-up, so that I can restore my Ubuntu in case of major failures, like HDD failing. As far as I can see, I have 2 choices: 1) Backing up with Deja Dup to an external disk. This is fine and I am already doing, but in case my HDD fails, and I make a new Ubuntu install on a new disk, will Deja Dup be able to restore all my setting and stuff from the backed up files? If it can, then what other files/folders should I add in Deja Dup to back-up (currently I have set only the recommended /home folder)? Is there a point in telling Deja Dup to back-up everything under "/" ? 2) A disk/partition cloning software. This would be something similar to Noton ghost. Is there such a software with nice GUI that you could recommend for Ubuntu? And even better, it would be nice if Ubuntu's liveCD could recognize such a clone at install step. I am using 11.10

    Read the article

  • WiFi is not detecting in compaq presario c700

    - by charan
    Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

    Read the article

  • SMART: DISK FAILURE IS IMMINENT (under 24 hours?)

    - by flix
    I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista( I keep it just because of school). Everything was OK on both OSes,but one day on Ubuntu I was getting awkward noises from my notebooks's hard drive and then everything stops and I couldn't do anything. On Windows everything was ok. Everytime I boot on Ubuntu I can get 5 minutes of normal run, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI(Disk Utility, or something like that and from terminal). From the GUI I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks(or broken blocks, I had that test I while ago) on my HDD. From the terminal ( I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my linux apps on Windows. PLEASE HELP!!! How can I separate the bad blocks from Ubuntu so it wouldn't use them?

    Read the article

  • Proof Identify stolen computer getting computer identification info from Launchpad bugs and comparing

    - by Kangarooo
    I sold my old laptop to neighbours and it was stolen from them. Well i think i have found thief so i want to check his computer id and compare it to my old Launchpad bugs id. How in Launchpad i can find from my bugs: Motherboard HDD Somthing else that can help identify it Maybe how to recover or find some overwritten files (couse now there is windows) I found in Launchpad one my bugs has LSPCI autogenerated from bug 682846 https://launchpadlibrarian.net/70611231/Lspci.txt but i dont see any id that can be used to identify specificly my comp. This can be used to identify many same models. Or i missed something in there? And what commands should i use to get all identification on that comp in one go fast? Just lspci? How to get same lspci as it is in that Launchpad link? Now testing laspci on my computer i dont get so much info. Also im now doing a search in my external hdd where i have many backups and maybe i have there result from lspci. So what containing keywords would help doing search with for small lspci and full reports ive done? I might have done sudo lshw somefilename

    Read the article

  • Should we choose Java over C# or we should consider using Mono?

    - by A. Karimi
    We are a small team of independent developers with an average experience of 7 years in C#/.NET platform. We almost work on small to average web application projects that allows us to choose our favorite platform. I believe that our current platform (C#/.NET) allows us to be more productive than if we were working in Java but what makes me think about choosing Java over C# is the costs and the community (of the open source). Our projects allow us even work with various frameworks as well as various platforms. For example we can even use Nancy. So we are able to decrease the costs by using Mono which can be deployed on Linux servers. But I'm looking for a complete ecosystem (IDE/Platform/Production Environment) that decreases our costs and makes us feel completely supported by the community. As an example of issues I've experienced with MonoDevelop, I can refer to the poor support of the Razor syntax on MonoDevelop. As another example, We are using "VS 2012 Express for Web" as our IDE to decrease the costs but as you know it doesn't support plugins and I have serious problems with XML comments (I missed GhostDoc). We strongly believe in strongly-typed programming languages so please don't offer the other languages and platforms such as Ruby, PHP, etc. Now I want to choose between: Keep going on C#, buy some products and be hopeful about openness of .NET ecosystem and its open source community. Changing the platform and start using the Java open source ecosystem

    Read the article

  • SMART says disk failure is imminent due to bad blocks, what do I need to do?

    - by flix
    I have on my hard drive 2 OSes: Ubuntu 12.04 and Windows Vista (I keep it just because of school). Everything was OK on both OSes, but one day on Ubuntu I was getting awkward noises from my notebooks' hard drive and then everything stopped and I couldn't do anything. On Windows everything was OK. Every time I boot Ubuntu I can get 5 minutes normal run time, without problems. After that the hard drive sounds crazy and nothing works. I could run S.M.A.R.T tests from a older Ubuntu CD (10.04) from the GUI (Disk Utility, or something like that and from terminal). From the GUI, I got that the DISK FAILURE IS IMMINENT and I have ~700 bad blocks (or broken blocks, I had that test I while ago) on my HDD. From the terminal (I don't remember if it was fsck or a SMART test command) I got that the HDD will fail in under 24 hours. Since then it passed 2-3 weeks. I've tried "badblocks" but after 10 hours it was still running and I had to stop it. Now I have to use cygwin and other alternatives for my Linux apps on Windows. How can I separate the bad blocks from Ubuntu so it wouldn't use them? Please help.

    Read the article

  • Help setting up wireless in Ubuntu 13.04

    - by James
    I'm having problems connecting my WIFI in Ubuntu 13.04 . So I was wondering if filling in the data manually ie: the IPv4, IPv6, the SSID and BSSID info etc. I did try this before but maybe I put in the wrong data or maybe not enough. Would that make it work? I just don't know how to find out some of the data you need to put in? I'm new and it's confusing. Does anyone know the solution? Here is lspci: james@james-MM061:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 01) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 01) 00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [IDE mode] (rev 01) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01) 03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02) 03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) 0b:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) Computer information: Model: Dell MM061 Mobile Intel(R) 945GM Express Chipset Family [Display adapter] (2x)

    Read the article

  • Installing Xubuntu alongside with UEFI

    - by Geo
    For the past week and a half I have been trying to figure out how to install Xubuntu 13.10 alongside the Windows 7 install I have on my laptop (ASUS X501A with UEFI) and I'm pretty much at my wit's end. Could someone point me to set of thorough instructions on installing Xubuntu (or any of the Ubuntu derivatives) on a HDD under UEFI alongside Windows 7 64-bit Home Premium? Preferably one that also covers GRUB/bootloader problems that come afterwards. A few additional details: Motherboard does have UEFI. I've disabled Secure Boot and Fast Boot. Launch CSM is enabled and the platform keys are not installed (these settings allow me to at least boot Windows 7). I set the HDD's partition table to GPT through GParted before I installed Windows. I'm installing from a bootable USB that has been created through a tool called Rufus with the GPT partition scheme for UEFI computers option, otherwise I've left it at default. I am able to boot into Xubuntu in UEFI mode, but I'd much rather be able to see the option: Install Xubuntu Alongside Windows 7 (or however it's phrased), Xubuntu seems to be unable to recognize that Windows 7 is installed. I do have access to a bootable USB stick containing GParted though Xubuntu seems to come preinstalled with it. If there's anything else that might be of help, please let me know.

    Read the article

  • Windows 7 and Ubuntu Boot/Corruption Problems

    - by Kiraisuki
    I searched around, but I couldn't find the answer to why Windows 7 Ultimate 64x and Ubuntu 12.04 LTS 64x could'nt live together happily on my Asus G1s-X1 laptop. I had Windows 7 Ultimate 64x installed on the laptop when I bought it (bought it used, it comes with Vista new) and I wanted to try out Ubuntu and see what all the hype about the free OS was. I installed Ubuntu on an external 80GB iomega HDD with Windows 7 on my main drive. They both work fine for about 2-3 weeks, until Ubuntu suddenly is unable to boot. A few days after Ubuntu fails, Windows corrupts majorly (winload.exe, ntkrnlpa.exe, and various others corrupt randomly) and Windows Recovery Environment is completely useless. Booting to a live USB with Ubuntu and trying to reinstall it fails, and trying to wipe the main drive and install it there fails as well (something about my graphics card.) I managed to get Windows 7 Ultimate 64x back up and running (after many disk formats) but now I am left with a broken (and invisible) Ubuntu installation on the external drive. Is there any way to get the broken and non-bootable Ubuntu installation off the HDD without damaging or erasing the many files and programs installed and stored on the 80GB drive?

    Read the article

  • Huwawei E220 broadband dongle not working

    - by Roshnal
    The problem is, I have used Ubuntu from 6.10 upto 11.10. And upto 11.04 I used my same USB 3G dongle to connect to broadband and it worked fine. But 2 days ago I upgraded to Ubuntu 11.10 and broadband is not working. It detects my dongle and creates a connection without a problem, but when connecting it just keeps on and on for a long time and then say I'm offline. So I did a clean install and the same thing occurred. But I also have a netbook and its got Ubuntu 11.10. I tried using the same dongle for internet on that netbook and it worked fine without any issues. But this isn't a problem with my USB port on my main machine or something like that because I'm also using Windows on my main machine (dual-boot) and its working fine. My hardware: Main computer (one that I'm trying to connect): 2.8GHz dual core Intel 2GB RAM 500GB Sata II HDD 384MB Video Memory (Intel G31/G33 chipset) Ubuntu 11.10 (32bit) My NetBook (broadband working fine): 1.6GHz Intel Atom (dual core) 1GB DDR3 RAM 250GB HDD 128MB Video Memory (Intel something-I-can't-remember) Ubuntu 11.10 (32bit) My dongle is a Huawei E220 and ISP is Dialog GSM (I'm in Sri Lanka) So any idea why this is? I really love Ubuntu and this is bugging me off.. Any help greatly appreciated. Regards, Roshnal

    Read the article

  • Why is LSHW Only listing one of my two HDDs?

    - by Mark
    I have a 120GB HDD and a 1TB HDD in the system. I installed Ubuntu Server using LVM on the 120GB. After installation I added the 1TB to the existing volume group and added 10GB to /home as a test. My understanding is that lshw is supposed to list hardware. What's the difference here? mark@server:~$ sudo lshw -short -c disk H/W path Device Class Description ========================================================= /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/1/0.0.0 /dev/sdc disk SCSI Disk /0/1/0.0.1 /dev/sdd disk SCSI Disk /0/1/0.0.2 /dev/sde disk SCSI Disk /0/1/0.0.3 /dev/sdf disk SCSI Disk The 1TB only shows up as a volume, not as a disk. mark@server:~$ sudo lshw -short .... /0/100/1f.2/0 /dev/sda disk 120GB ST3120026AS /0/100/1f.2/0/1 /dev/sda1 volume 476MiB Linux filesystem partition /0/100/1f.2/0/2 /dev/sda2 volume 111GiB Linux LVM Physical Volume partition /0/100/1f.2/1 /dev/cdrom disk DVD+-RW GH50N /0/100/1f.2/0.0.0 /dev/sdb volume 931GiB WDC WD1001FALS-0 Thanks, Mark

    Read the article

  • Dual Booting Windows 7 and Ubuntu 12.04. Partition Sizes?

    - by John F.
    I'm about to reinstall Windows, so I thought that I'd try Ubuntu out on a partition just for fun. My question is, how large should my partitions be for each of them? I know this various depending on what you use, so i'll give you a general idea of what I have, and what I have in mind. I'm currently running: Windows 7 Professional (64bit) RAM: 4GB CPU: 2.5Ghz Quad Core processor HDD: 500GB GPU: 1GB Nvidia GeForce I have around 130GB in Steam games, and some heavier applications like Photoshop CS6, Sony Vegas Pro 11. But other Applications I use are: Chrome Skype Dxtory Fraps OpenOffice BitTorrent and other assorted smaller programs. So, I was thinking that I would give my Windows partition about 150-200GB, my Ubuntu Partition around 20GB, and the rest to shared storage. I'm not really sure if I'd need more or less on Ubuntu, because I've never used it and I'm not really sure what kind of apps i'd be using over there. This would also be a clean install, so I'd be wiping my HDD, creating the Partitions in GParted, then installing Windows with Ubuntu following that. Any critique you could give me? Maybe explanations to what the /root, /boot and /home partitions I hear are about? Thanks in advanced if you actually read this lengthy thing! Any help is appreciated. (x

    Read the article

  • All files gone after running fsck. How can I recover my files?

    - by cinlung
    I am a newbie in Linux. So this is my story I installed Ubuntu server 10.04lts. It worked great for many months, until today i decided to run fsck on the system partition and although it warned me, I kept pressing yes and now it will only boot into grub prompt. So i read some article and tried grub reinstall. But before performing grub reinstall, i decided to run fsck again from Ubuntu 10.04 lts for desktop live CD. The fsck painfully passes, now my drive is recognized as ext4 system and I am able to mount it again. However, all i can see is just boot directory and lost&found. I tried to perform grub reinstalling by doing grup-install stuff, now my grub is still not loading right, my files are missing, and the weird thing is that the amount I found used by boot and lost n found is only 5gb and the amount used in he hdd is 8 gb. So my files must be somewhere in the hdd. Is there any sinple way maybe a windows tool or something yo recover my files? I only need to retrieve my database backup and everything else can go. I am freaking out here. Please help.

    Read the article

  • I seem to be missing a few important concepts with PhoneGap

    - by garethdn
    I'm planning on developing an app on multiple platforms and I'm thinking that PhoneGap might be perfect for me. I had been reading that it's one codebase for all platforms but looking at the PhoneGap guide it seems there are separate instructions for each platform. So if i want to develop for iOS, Android, BB and WP7 I need to write 4 different sets of code? I'm sure i'm missing something fundamental here. Aside from that, how do people usually approach a PhoneGap build? You obviously / probably want the finished app to look like a native app - is it more common than not to use jQuery Mobile together with PhoneGap? Is there a preferred IDE? I see, in the guide, for iOS they seem to suggest Xcode. I'm fine using Xcode but it seems a bit overkill for HTML & CSS. Do I need to develop in Xcode and if not how do i approach it? Use a different IDE / Text Editor and then copy paste into Xcode for building and testing? I know this question is long-winded and fundamental but it something which i don't think is properly addressed in the guides. Thanks.

    Read the article

  • How to start Ubuntu with no working video card?

    - by ViliusK
    I have a laptop with broken video card. It has two operating systems installed - Windows 7 and Ubuntu 10.10 Desktop Edition. It has GRUB to manage which operating system to boot up. Windows is default OS. And Windows fails to boot up without video card. I'm checking with ping to the ports which are shown as used by DHCP in my router. Normal boot of Ubuntu also fails and it restarts after a while. But when I choose (blindly, but checking HDD indicator and by counting button presses when GRUB menu appears) to boot second option of Ubuntu (rescue mode) it starts and I can ping it. But when I try to connect to it through SSH, I'm getting "connection refused" error from putty. I've took out HDD from my laptop already and inserted it to WD Passport case so now I can connect it to other computer to edit configuration files. How can I check if SSH server is working? How to enable it in rescue mode? Or better, how to disable video card to be required while booting Ubuntu in normal mode?

    Read the article

  • Dual boot UEFI Windows 7 and Ubuntu 12.04 (both 64 bits). W7 entry doesn't appear in GRUB

    - by Joe
    After trying to install both OS during 2 days, I'm confused and getting mad... I have SSD 128 GB and HDD 500 GB both empty. My laptop is Asus K55VM. BIOS support UEFI. What I have done: Install new SSD (Samsung 830 128GB) Use GParted on liveCD to create new table of partitions (GPT) and create 3 partitions (in the SSD) for different purposes: Partition 1: 80 GB (w7); Partition 2: 30 GB (Ubuntu 12.04 -Just / -); Partition 3: 10 GB unused (for future extesion of the other partitions) Install Windows 7 (with UEFI) in Partition 1. This create: /dev/sda1 - 100 MB for System (UEFI boot I guess) - FAT32 /dev/sda2 - 100 MB aprox. for MSR /dev/sda3 - 79.800 MB aprox. for Windows7 data In this point everything works fine. I have W7. Now I install Ubuntu 12.04 amd64 (with UEFI) as follows: Install / in Partition 2 - /dev/sda4 30 GB ext4, and in the hdd I install /home and swap. I select bootloader in /dev/sda1 (where it's supposed to be the UEFI boot). I install updates and reboot. Problem: Now just appears grub menu with Ubuntu entries and not Windows 7. Alternative solution found: When I turn on laptop, before loading GRUB I press ESC key and appear BIOS boot, so I can select to boot the Windows partition, Ubuntu partition, DVD, USB, etc... but I think is not the best way to boot different OS. I've tried: sudo update-grub2 with no success. What can I do??

    Read the article

  • cannot boot ubuntu 13.10 with my usb, Can i change the kernal on my laptop to run it?

    - by Carlos Dunick
    Currently i am running 12.04 and looking for an upgrade to 13.10 I first tried a bootable 64bit usb and failed. With the message saying "Kernal requires an x86-64 CPU but only detected an I686 CPU Unable to boot please use a kernal appropriate for your CPU" then tried 32bit and same message came up. Is this due to my laptop simply being to slow? or can/should i change the kernal somehow? Acer Aspire 5710z Intel Pentium dual core processor, 1.73Ghz, 533 MHz FSB, 1 MB L2 cache. 2GB DDR2 lspci 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03) 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) 00:1c.2 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 3 (rev 02) 00:1c.3 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 4 (rev 02) 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 02) 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 02) 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 04:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) 05:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) 06:00.0 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 06:00.1 SD Host controller: ENE Technology Inc ENE PCI SmartMedia / xD Card Reader Controller 06:00.2 FLASH memory: ENE Technology Inc Memory Stick Card Reader Controller 06:00.3 FLASH memory: ENE Technology Inc ENE PCI Secure Digital / MMC Card Reader Controller

    Read the article

  • PHP Debugging

    - by Bob Porter
    Originally posted on: http://geekswithblogs.net/blogofbob/archive/2013/06/25/php-debugging.aspxI have been experimenting setting up a PHP development environment. I have been trying on Windows, Linux (Ubuntu) and Mac OS X. So far my favorite environment is on Mac OS X. I have tried a number of IDE's and debuggers as well.  IDE's Eclipse with the PDT Add On The PDT version of Eclipse Aptana Zend Netbeans  Debuggers Zend XDebug So far the only environments that I could get running quickly were Zend and Netbeans. Eclipse is a nightmare of versions and capabilities. I could only get Eclipse working well on Windows. On Ubuntu I was able to get the debugger working once. Thats it, one session, then it never worked again. I love the Zend tools and environment and it worked well everywhere I tried it, but it was beyond my budget.  Aptana also worked best on Windows, on Mac OS X it was fragile and I never could get debugging to work.  Netbeans worked first time, every time, every where. With one oddity, after several debugging sessions the debugger would refuse to connect. On every platform, I would end having to reboot to restore debugging, which would then work correctly for quite some time. I am sure I will discover that some process is hanging and there is a less intrusive way to clear the issue, but for now rebooting always works. In a future post I will go over how exactly I set my environment up, for now I have decided to stay with OS X. By the way, I did NOT use MAMP or the Zend Server, I stuck with PHP compiled and built from source, as well as Apache and MySQL installed locally. I use Homebrew as a package manager for OS X. I tried PORT but did not like the fact I had to sudo all the time to use it, and it installed things in /opt which I was not used to. Homebrew does sandbox the apps but it is nice enough to symlink them to their "normal" locations usually in /usr/local.

    Read the article

  • How can I install from a 9.04 live USB/DVD?

    - by bstpierre
    I have a 9.04 (Jaunty) ISO burned to a USB stick; it appears to be a "live DVD". When I boot from it, I get a GRUB menu listing: Ubuntu, with Linux 2.6.35-generic (This matches the system currently installed on the HDD?) Ubuntu, with Linux 2.6.35-generic (recovery mode) Memory test Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1) Ubuntu 9.04, kernel 2.6.28-11-generic (recovery mode) (on /dev/sda1) Ubuntu 9.04, memtest86+ (on /dev/sda1) When I select Ubuntu 9.04, kernel 2.6.28-11-generic (on /dev/sda1), I arrive at the desktop of a 9.04 system. I want to wipe the HDD clean and install 9.04. (Upgrading to something newer is not an option; this version is required by a legacy application.) How can I install from this live USB image? I vaguely remember some incantation that I should be able to use in the booted system, but my google-fu is broken at the moment. I'm comfortable with low-level commands, so if you want to recommend a more hard-core strategy, I'm willing to roll with it without requiring a ton of detail...

    Read the article

  • Dual Boot Windows 8 and Ubuntu

    - by Nick
    My laptop has two hard drives, one 320GB HDD and a 30GB SSD. I installed Windows 8 on the HDD and Ubuntu on the SSD. However, after I installed Ubuntu, Windows 8 did not appear on the boot list. I tried boot-repair, but this didn't help.Here is the output of my fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd9314a Device Boot Start End Blocks Id System /dev/sda1 * 2048 625139711 312568832 7 HPFS/NTFS/exFAT Disk /dev/sdb: 30.0 GB, 30016659456 bytes 255 heads, 63 sectors/track, 3649 cylinders, total 58626288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x6cd93132 Device Boot Start End Blocks Id System /dev/sdb1 * 2048 207126 102539+ 83 Linux /dev/sdb2 208894 58626047 29208577 5 Extended /dev/sdb5 208896 4112383 1951744 82 Linux swap / Solaris /dev/sdb6 4114432 58626047 27255808 83 Linux Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009c694 Device Boot Start End Blocks Id System /dev/mmcblk0p1 * 8192 7744511 3868160 b W95 FAT32 I also tried sudo grub-update, but that also did nothing.

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >