Search Results

Search found 8831 results on 354 pages for 'intel graphics'.

Page 86/354 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Increasing Screen Resolution to more than limit and scaling to origional

  - by Akshat Mittal

  I have a laptop, with Screen Resolution - 1366x768 (most common) - I want to increase it further to 1600x900 (or higher), in the same ratio. I want to scale the higher resolution on my current screen to fit it. I found xrandr with command xrandr --output LVDS1 --scale 1.4x1.4, this worked but again resulted to another problem, it does the scaling thing but the cursor is still blocked into the native screen resolution and I am not able to move it further, I found that the bug is already filed here. Also this command was only for Linux, I wanted to do this thing with both Linux and Windows (including Windows 8). I want a similar software that is bug free (at least not a major bug like this) and that supports Windows as well (or two separate software for Windows and Linux). Any help is appreciated and Thanks in advance.

  Read the article

• What is the Best configuration for i7 processor

  - by Turbo

  my purpose is for gaming and i rip movies using some standard rippers like (Megui). I want the best configuration to be suggested for this prupose.

  Read the article

• debian 6 losing a large amount of packets

  - by Sc0rian

  I have a rather strange problem. We covered all the obvious hardware related issues (different nic, eth cable and switch) however I cannot seem to stop eth dropping packets. I have 4 servers all exactly the same. driver: e1000e version: 1.2.20-k2 firmware-version: 1.8-0 bus-info: 0000:06:00.0 They are all running the latest kernel(2.6.32-5-amd64). However they do this: RX packets:17073870634 errors:0 dropped:14147208 overruns:0 frame:0 another server: eth0 Link encap:Ethernet HWaddr e0:69:95:05:2f:cb inet addr:10.10.10.86 Bcast:10.10.10.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5455209277 errors:0 dropped:375445 overruns:0 frame:0 TX packets:3666134366 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:6688414486673 (6.0 TiB) TX bytes:1611812171539 (1.4 TiB) Interrupt:20 Memory:d0600000-d0620000 eth1 Link encap:Ethernet HWaddr 00:1b:21:b7:7a:ce inet addr:10.10.0.86 Bcast:10.10.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:15473695728 errors:0 dropped:5808325 overruns:0 frame:0 TX packets:20112364421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:9192378766434 (8.3 TiB) TX bytes:20216368266761 (18.3 TiB) Interrupt:17 Memory:d0280000-d02a0000 A massive amount of dropped packets. I have tried to load on the latest driver, 1.9.5. This did nothing. I'm not sure what else to do.

  Read the article

• TIF opens via IE, but not within a page

  - by tsilb

  I have a picture: http://www.kconnolly.net/Gallery/Panoramas/Mountainscapes/DSCN2049_stitch_sm.tif Which loads fine when I paste it into my address bar. However, when I embed it within a Page, I get a broken image icon. However, all browsers treat it as a download. Conversely, this image, which was made the same way, works fine when I embed it within a Page. Browsers treat this as a Document and not as a Download: http://www.kconnolly.net/Gallery/Panoramas/Mountainscapes/DSCN2060_stitch_sm.tif Why is that?

  Read the article

• Monitor weirdness/flickering with new Viao PCG-3112L

  - by Rosarch

  I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

  Read the article

• MacPro 1,1 video's card

  - by alexus

  I just bought a Mac Pro 1,1 from my coworkers and I'm looking to upgrade video card as the one inside is very noisy. What are my options? Basically I'm not looking to spend a lot of money, in fact i'd rather to spend as little as possible and get low end or mid range card, I'm not really playing games all that much so pretty much anything will do, I'd prefer 2xx series though. Current Mac Pro sells w/ GT120, Apple sells upgrade kit for $149 (which is okay, I just not sure if I'll be able to use this card on such an old Mac Pro)

  Read the article

• ATI Radeon HD 5770 Cooling

  - by Murtez

  I have a Radeon HD 5770 manufactured by ATI. In the course of using compressed air to clean it the fan shattered. I put a case fan on the card to cool it, but it's not doing a great job; the temperature goes to nearly 100 sometimes. The card is not overclocked or anything, the PC itself is clean. I looked around for a third party cooling system but the only one I found was the Accelero L2 Pro. It's low on stock and I don't know how great it will be, some review say it may not fit on all 5770 cards. Does anyone know of another one that will work? Help is much appreciated.

  Read the article

• Windows 7 - 64 Computer shuts off unexpectedly

  - by C. Ross

  I have a home built Windows 7 x64 computer with a Core 2 Quad CPU. It has recently taken to suddenly shutting down/turning off at unusual intervals. It seems to be most common when playing media. I have tried running SpeedFan, and the CPU temp seems to hover around 49C. The computer has been running fine for over 1 years. Could heat be my problem, and how should I address it?

  Read the article

• Saving each layer of a Photoshop image to separate files

  - by BadKnees

  I have a PSD file with all icons in separate layers as vectors. I would like to save them in different sizes to use in iPhone, iPhone4 and iPad. I tried Files Scripts Export Layers to Files That took about 15 minutes to save each layer while the computer was overheating from the work. Tried with two different computers, one with CS4 and the other with CS5. Same result. And that doesn't allow me to set sizes. Seem like most icon packs, like pictos, glyphish and iconsweets are distributed in this way, in one PSD file. Is some easy way to get them out of the PSD and into PNG files?

  Read the article

• what can I do with an old but working PC [closed]

  - by fskreuz

  I have an old Dell optiplex GX240 on Pentium 4 1.8Ghz and 256MB Ram (or was it 512MB). It's still in working condition but it's getting slow for me and i wanted to optimize it. I just want that old box to be usable even for simple desktop use (email, surfing, chat). I also have to note that my parents prefer use it over a laptop for some reason. Treat it as a "box-type netbook". unlike the other threads that they all prefer sending away or use as file server, firewall and that, i am looking for suggestions on how to keep it usable as the main PC. any suggestions? OS perhaps?

  Read the article

• Good application to render or convert SVG files to other file formats

  - by Jared

  I need to render SVG files to other file formats (.png, for example.) What's a good application for performing that render or conversion? Specifically, I need an application that runs on Windows. I'd welcome suggestions for other platforms, as well.

  Read the article

• How to Find Out What Version of Display Driver is Installed

  - by Artium

  One of my favorite games, "Wolfenstein Enemy Territory", has stopped working lately. It throws a segfault during the initialization phase. I suspect that the reason is a recent update to the video card driver. The problem started after I updated Ubuntu but I do not remember if there was a driver update in the list. My question is how can I check this. How can I view the current version of the display driver installed and the date it was last updated? If I discover that this is indeed the problem, will it be possible to revert the update and stay with the previous version of the driver?

  Read the article

• Using 4 monitors with 2 generic video cards... possible?

  - by Ikram

  I'm thinking of setting up 4 monitors in a grid, using two video cards, one card to feed each pair of monitors through the card's two DVI ports. The most important requirement for me is to have the grid of monitors act as one single huge screen. Is this scenario possible by using two generic cards like Radeon 4870s on a Windows 7 computer? (I've heard of Eyefinity, but 4870s don't have it) Another issue is that I only have one PCI-Express slot on my computer's motherboard, therefore I'll need to use one of the lesser PCI cards as the second video card. Will this pose problems?

  Read the article

• Mountain Lion screen crashes after returning from sleep

  - by Aron Rotteveel

  During the past 3 days I have experienced the following issue: when returning from sleep, I see an extremely garbled version of my desktop. The only thing that seems to help is a reboot. My first guess is that this is related to the video card. After looking into this issue, I found a lot of problems related to ML and returning from sleep, such as this post on AskDifferent, but I think this is a different issue because it does not speak of a garbled screen. Some more details: System: MacBook Pro 15" early 2011, 2,2GHZ I7, 8GB Ram, AMD Radeon HD6750M 1024 The issue seems to happen only when I open my laptop in the morning; if I close and open my laptop during the day, it does not seem to happen. The issue 'solves' when rebooting. Photo of how this looks: Update November 27th 2012: I re-installed my laptop a couple of weeks ago, which seemed to have solved the problem, but sadly, it still persists.

  Read the article

• Is there any way to limit the turbo boost speed / intensity on i7 lap?

  - by Anonymous

  I've just got a used i7 laptop, one of these overheating pavilions from HP with quad cores. And I really want to find a compromise between the temp and performance. If I use linpack, or some other heavy benchmark, the temp easily gets to 95+, and having a TJ of 100 Degrees, for a 2630QM model, it really gets me throttling, that no cooling pad or even an industrial fan could solve. I figured later that it is due to turbo boost, and if I set my power settings to use 99% of the CPU instead of 100%, and it seems to disable the turbo boost, so the temp gets better. But then again it loses quite a bit of performance. The regular clock is 2GHz, and in turbo boost it gets to 2.6Ghz, but I just wonder if I could limit it to around 2.3Ghz, that would be a real nice thing. Also there is another question I've hard time getting answer to. It seems to me that clocks are very quickly boosting up to max even when not needed, eg, it's ok if the CPU has 0% load, the clocks get to their 800MHz, but even if it gets to about 5% it quickly jumps to a max and even popping up turbo, which seems very strange to me. So I wonder if there is any way to adjust the sensitivity of the Speed Step feature. I believe it would be more logical to demand increased clock if it hits let's say 50% load. I do understand that most of these features are probably hardwired somewhere in the CPU itself or the MB, which has no tuning options just like on many laptops. But I would appreciate if you could recommend some thing, or some software. Thanks

  Read the article

• Screen occasionally flashes black when under load, sometimes does not recover

  - by Oak

  I've built a brand new machine, but to my horror my monitor occasionally flashes black for around a second, then returning to normal. This happens under load (watching videos / playing games) but only sometimes; e.g. it doesn't occur in "Batman: Arkham City" but does in "XCOM: Enemy Unknown". When watching videos, it also occurs when not watching them full-screen, and it sometimes even occurs when the machine isn't doing anything, just sitting at the desktop and moving the mouse around. Has anyone ran into this problem and knows of any solution? Additionally, sometimes after the black screen, it won't return to normal, instead turning completely corrupt. In these cases even quitting the application doesn't help, but physically disconnecting and reconnecting the monitor fixes the problem. This problem did not occur on my earlier machine which used the same physical monitor. Additional details: Windows Server 2012, configured as Windows 8, with latest updates installed NVIDIA GeForce GTX 660 Ti, with latest driver installed Ample amounts of CPU and RAM for playing the above games and for watching videos. I've read about similar problems elsewhere but could not find a working solution: http://www.youtube.com/watch?v=Zt00C-HXFbA&noredirect=1 http://www.sevenforums.com/hardware-devices/59126-monitor-flashing-black.html https://eu.battle.net/d3/en/forum/topic/4079098908?page=4 http://www.tomshardware.com/forum/347422-33-screen-flickering-black-nvidia-driver-update

  Read the article

• Looking for temporal upsampling / motion interpolation software

  - by timday

  I'm looking for something (prereably FOSS software) which can take an animation with N images as input, and which will output an animation with M frames, where M is in the range 2N to 5N or so. I believe the general technique is called "temporal upsampling" or possibly "inbetweening" (or "'tweening" for short). Note that it does need to make some effort to do motion tracking of things in the scene ("optical flow"); just fading ("dissolve") between keyframes isn't going to cut it. Googling "temporal upsampling" turns up any number of papers on the subject, but I've yet to discover any code/software (a gstreamer plugin would be perfect) I can just use to try the technique out. Any suggestions ? Additional information: "Motion interpolation" seems to be the more widely used name in the TV world for what I'm looking for. See this and the video here too. Interestingly, some cinephiles seem to hate what these technologies do to 24FPS film: e.g a comment "makes Gone With The Wind look like a soap opera shot on video".

  Read the article

• Render a 3D image as a 2D vector image

  - by Clinton Blackmore

  Is there any software that will take a 3d model (in any format) and allow you to render it as a 2D vector image (preferable as either an .SVG or .PDF)? My intention is to render LEGO building instructions this way. While there are many tools that let you view them or generate nice, rasterized output, I'd really like to be able to generate vectorized output. Textures are not needed, and hidden line removal may not be needed. I could use a tool that works on any platform (although my preference is OS X, Linux, then Windows). Open source is preferred. If no one knows of a tool that does this, does anyone have a good recommendation of something to hack on and add a feature to output via Cairo?

  Read the article

• How to install Uniconverter (command-line app) on Mac OS 10.7.2 (Lion)?

  - by RecentlyAFish

  Uniconverter is a command-line tool that shares code with the sK1 Project. it's used to convert from one type of vector graphic file to another like this: uniconverter before.eps after.svg I'm looking for a step by step solution to install this tool on my laptop. A similar question posted on the Uniconverter Forum back in August is still unanswered. I read about Uniconverter in an answer posted by Neil but don't grok how to send him a message directly for more details.

  Read the article

• Multiple monitors on ATI Radeon HD 5450 1GB DDR2 (Brand: Sapphire)

  - by Robert

  From other posts here, I understand that it might be possible to use up to 3 monitors on this card. My understanding (from the other posts here as well) is that since I have a HDMI output, I do not have a 'DisplayPort', right ? Mine has indeed 3 ports: DVI, HDMI and VGA. Can I have dual-monitor using both the HDMI and DVI ports simulataneously (I am not looking for Eyefinity, but simply extended desktop). Currently I am using dual monitor with DVI and VGA but will replace my 17 inches next week with a new (larger) one that has both VGA and DVI, so I intend to use both monitors connected digitally. I intend to purchase a cable ''HDMI to DVI''(MM) to do so on the second monitor. Optimal resolution on the one I intend to keep (22 inches) : 1680 x 1050, primary monitor. New one (24 inches) has an optimal resolution of 1920 x 1080. Am I running for problems ? Thanks, Rob

  Read the article

• Looking for temporal upsampling software

  - by timday

  I'm looking for something (prereably FOSS software) which can take an animation with N images as input, and which will output an animation with M frames, where M is in the range 2N to 5N or so. I believe the general technique is called "temporal upsampling" or possibly "inbetweening" (or "'tweening" for short). Note that it does need to make some effort to do motion tracking of things in the scene ("optical flow"); just fading ("dissolve") between keyframes isn't going to cut it. Googling "temporal upsampling" turns up any number of papers on the subject, but I've yet to discover any code/software I can just use to try the technique out. Any suggestions ?

  Read the article

• Possible DVI Spliter Issues?

  - by Kurru

  Hi I am thinking about buying a DVI splitter cable online and a DVI- HDMI adapter. Can i use these to clone my monitors output so one can go to my monitor, and the other to my projector? Can anyone think of any issues with using the adapter like this? Would there be problems with signal lose or anything? Thanks

  Read the article

• Does VMware ESX Fault Tolerance (FT) support depend on the CPU only?

  - by user71784

  I'm trying to find out whether VMware ESX 4.x Fault Tolerance (FT) is supported on a particular server and VMware's HCL is confusing me. It says that some servers with FT-supported processors (specifically the Xeon 3400 Lynnfield) do not support FT and some with almost identical specs (same chipset for instance) do support FT. Could this be a mistake on the HCL itself? To my understanding FT support is based only on the CPU. Thanks. RC

  Read the article

• Mini DV and DVI Conversion

  - by Kairan

  Video card is: AMD HD 6950 My video card comes with 1xHDMI, 2xDVI, and 2xMini DV ports. I have always used VGA and DVI only. I have the HDMI already connected. I want to hook up 2 more display. One of the display can take a VGA only, the other is an LCD TV so it has VGA, HDMI, Component. I am wondering: 1) What is the best output port to use for the second two monitors? The miniDV or the DVI? 2) I need to run a long cable maybe 15-25 feet, this might change the answer to question 1, is an HDMI long cable 20+ ft going to be better than a 20ft DVI or miniDV ?

  Read the article

• Multiple EyeFinity Display groups

  - by Shinrai

  Is it possible with an EyeFinity enabled card to make multiple display groups at once? I was playing with a FirePro 2460 and while a 4x1 or 2x2 display group works quite nicely, if I make a 2x1 display group and then select one of the other displays to try to make a second 2x1 display group, it disables the first one. Is there any way to circumvent this behavior and set up two separate spans on the same card? Additionally, can you set up distinct display groups if they're on different cards? I will have the opportunity to test several of these cards in one machine very shortly, but I'm curious if anyone has any experience. EDIT: I can confirm that you can make multiple spans on multiple cards (as long as they don't cross cards, obviously) (If the answers are different for FirePro/FireMV cards and Radeon cards, that is helpful and relevant knowledge - I doubt it, though.)

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >